openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/Documentation/devicetree/bindings/gpio/gpio-adnp.txt

31 lines
826 B
Plaintext
Raw Normal View History

gpio: Add Avionic Design N-bit GPIO expander support This commit adds a driver for the Avionic Design N-bit GPIO expander. The expander provides a variable number of GPIO pins with interrupt support. Changes in v2: - allow building the driver as a module - assign of_node unconditionally - use linear mapping IRQ domain - properly cleanup IRQ domain - add OF device table and annotate device tables - emulate rising and falling edge triggers - increase #gpio-cells to 2 - drop support for !OF - use IS_ENABLED to conditionalize DEBUG_FS code Changes in v3: - make IRQ support runtime configurable (interrupt-controller property) - drop interrupt-controller and #interrupt-cells from DT binding - add inline to_adnp() function to wrap container_of() macro - consistently use adnp as name for struct adnp variables - remove irq_mask_cur and rename irq_mask to irq_enable - fix a subtle deadlock in adnp_gpio_direction_output() - remove dynamic allocations from debugfs code - rename regs to num_regs to avoid confusion - annotate non-trivial code with comments - don't acquire mutex in adnp_gpio_get() - assume NO_IRQ == 0 Cc: Grant Likely <grant.likely@secretlab.ca> Cc: devicetree-discuss@lists.ozlabs.org Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: linux-kernel@vger.kernel.org Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-18 16:57:10 +08:00
Avionic Design N-bit GPIO expander bindings
Required properties:
- compatible: should be "ad,gpio-adnp"
- reg: The I2C slave address for this device.
- interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifier for the controllers interrupt.
- #gpio-cells: Should be 2. The first cell is the GPIO number and the
second cell is used to specify optional parameters:
- bit 0: polarity (0: normal, 1: inverted)
- gpio-controller: Marks the device as a GPIO controller
- nr-gpios: The number of pins supported by the controller.
Example:
gpioext: gpio-controller@41 {
compatible = "ad,gpio-adnp";
reg = <0x41>;
interrupt-parent = <&gpio>;
interrupts = <160 1>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
nr-gpios = <64>;
};