mirror of https://gitee.com/openkylin/linux.git
269 lines
6.9 KiB
C
269 lines
6.9 KiB
C
|
/*
|
||
|
* Copyright (C) 2014 Hauke Mehrtens <hauke@hauke-m.de>
|
||
|
* Copyright (C) 2015 Broadcom Corporatcommon ion
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or
|
||
|
* modify it under the terms of the GNU General Public License as
|
||
|
* published by the Free Software Foundation version 2.
|
||
|
*
|
||
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
||
|
* kind, whether express or implied; without even the implied warranty
|
||
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
* GNU General Public License for more details.
|
||
|
*/
|
||
|
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/pci.h>
|
||
|
#include <linux/msi.h>
|
||
|
#include <linux/clk.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/mbus.h>
|
||
|
#include <linux/slab.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/interrupt.h>
|
||
|
#include <linux/platform_device.h>
|
||
|
#include <linux/of_address.h>
|
||
|
#include <linux/of_pci.h>
|
||
|
#include <linux/of_irq.h>
|
||
|
#include <linux/of_platform.h>
|
||
|
#include <linux/phy/phy.h>
|
||
|
|
||
|
#include "pcie-iproc.h"
|
||
|
|
||
|
#define CLK_CONTROL_OFFSET 0x000
|
||
|
#define EP_MODE_SURVIVE_PERST_SHIFT 1
|
||
|
#define EP_MODE_SURVIVE_PERST BIT(EP_MODE_SURVIVE_PERST_SHIFT)
|
||
|
#define RC_PCIE_RST_OUTPUT_SHIFT 0
|
||
|
#define RC_PCIE_RST_OUTPUT BIT(RC_PCIE_RST_OUTPUT_SHIFT)
|
||
|
|
||
|
#define CFG_IND_ADDR_OFFSET 0x120
|
||
|
#define CFG_IND_ADDR_MASK 0x00001ffc
|
||
|
|
||
|
#define CFG_IND_DATA_OFFSET 0x124
|
||
|
|
||
|
#define CFG_ADDR_OFFSET 0x1f8
|
||
|
#define CFG_ADDR_BUS_NUM_SHIFT 20
|
||
|
#define CFG_ADDR_BUS_NUM_MASK 0x0ff00000
|
||
|
#define CFG_ADDR_DEV_NUM_SHIFT 15
|
||
|
#define CFG_ADDR_DEV_NUM_MASK 0x000f8000
|
||
|
#define CFG_ADDR_FUNC_NUM_SHIFT 12
|
||
|
#define CFG_ADDR_FUNC_NUM_MASK 0x00007000
|
||
|
#define CFG_ADDR_REG_NUM_SHIFT 2
|
||
|
#define CFG_ADDR_REG_NUM_MASK 0x00000ffc
|
||
|
#define CFG_ADDR_CFG_TYPE_SHIFT 0
|
||
|
#define CFG_ADDR_CFG_TYPE_MASK 0x00000003
|
||
|
|
||
|
#define CFG_DATA_OFFSET 0x1fc
|
||
|
|
||
|
#define SYS_RC_INTX_EN 0x330
|
||
|
#define SYS_RC_INTX_MASK 0xf
|
||
|
|
||
|
static inline struct iproc_pcie *sys_to_pcie(struct pci_sys_data *sys)
|
||
|
{
|
||
|
return sys->private_data;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* Note access to the configuration registers are protected at the higher layer
|
||
|
* by 'pci_lock' in drivers/pci/access.c
|
||
|
*/
|
||
|
static void __iomem *iproc_pcie_map_cfg_bus(struct pci_bus *bus,
|
||
|
unsigned int devfn,
|
||
|
int where)
|
||
|
{
|
||
|
struct pci_sys_data *sys = bus->sysdata;
|
||
|
struct iproc_pcie *pcie = sys_to_pcie(sys);
|
||
|
unsigned slot = PCI_SLOT(devfn);
|
||
|
unsigned fn = PCI_FUNC(devfn);
|
||
|
unsigned busno = bus->number;
|
||
|
u32 val;
|
||
|
|
||
|
/* root complex access */
|
||
|
if (busno == 0) {
|
||
|
if (slot >= 1)
|
||
|
return NULL;
|
||
|
writel(where & CFG_IND_ADDR_MASK,
|
||
|
pcie->base + CFG_IND_ADDR_OFFSET);
|
||
|
return (pcie->base + CFG_IND_DATA_OFFSET);
|
||
|
}
|
||
|
|
||
|
if (fn > 1)
|
||
|
return NULL;
|
||
|
|
||
|
/* EP device access */
|
||
|
val = (busno << CFG_ADDR_BUS_NUM_SHIFT) |
|
||
|
(slot << CFG_ADDR_DEV_NUM_SHIFT) |
|
||
|
(fn << CFG_ADDR_FUNC_NUM_SHIFT) |
|
||
|
(where & CFG_ADDR_REG_NUM_MASK) |
|
||
|
(1 & CFG_ADDR_CFG_TYPE_MASK);
|
||
|
writel(val, pcie->base + CFG_ADDR_OFFSET);
|
||
|
|
||
|
return (pcie->base + CFG_DATA_OFFSET);
|
||
|
}
|
||
|
|
||
|
static struct pci_ops iproc_pcie_ops = {
|
||
|
.map_bus = iproc_pcie_map_cfg_bus,
|
||
|
.read = pci_generic_config_read32,
|
||
|
.write = pci_generic_config_write32,
|
||
|
};
|
||
|
|
||
|
static void iproc_pcie_reset(struct iproc_pcie *pcie)
|
||
|
{
|
||
|
u32 val;
|
||
|
|
||
|
/*
|
||
|
* Configure the PCIe controller as root complex and send a downstream
|
||
|
* reset
|
||
|
*/
|
||
|
val = EP_MODE_SURVIVE_PERST | RC_PCIE_RST_OUTPUT;
|
||
|
writel(val, pcie->base + CLK_CONTROL_OFFSET);
|
||
|
udelay(250);
|
||
|
val &= ~EP_MODE_SURVIVE_PERST;
|
||
|
writel(val, pcie->base + CLK_CONTROL_OFFSET);
|
||
|
msleep(250);
|
||
|
}
|
||
|
|
||
|
static int iproc_pcie_check_link(struct iproc_pcie *pcie, struct pci_bus *bus)
|
||
|
{
|
||
|
u8 hdr_type;
|
||
|
u32 link_ctrl;
|
||
|
u16 pos, link_status;
|
||
|
int link_is_active = 0;
|
||
|
|
||
|
/* make sure we are not in EP mode */
|
||
|
pci_bus_read_config_byte(bus, 0, PCI_HEADER_TYPE, &hdr_type);
|
||
|
if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) {
|
||
|
dev_err(pcie->dev, "in EP mode, hdr=%#02x\n", hdr_type);
|
||
|
return -EFAULT;
|
||
|
}
|
||
|
|
||
|
/* force class to PCI_CLASS_BRIDGE_PCI (0x0604) */
|
||
|
pci_bus_write_config_word(bus, 0, PCI_CLASS_DEVICE,
|
||
|
PCI_CLASS_BRIDGE_PCI);
|
||
|
|
||
|
/* check link status to see if link is active */
|
||
|
pos = pci_bus_find_capability(bus, 0, PCI_CAP_ID_EXP);
|
||
|
pci_bus_read_config_word(bus, 0, pos + PCI_EXP_LNKSTA, &link_status);
|
||
|
if (link_status & PCI_EXP_LNKSTA_NLW)
|
||
|
link_is_active = 1;
|
||
|
|
||
|
if (!link_is_active) {
|
||
|
/* try GEN 1 link speed */
|
||
|
#define PCI_LINK_STATUS_CTRL_2_OFFSET 0x0dc
|
||
|
#define PCI_TARGET_LINK_SPEED_MASK 0xf
|
||
|
#define PCI_TARGET_LINK_SPEED_GEN2 0x2
|
||
|
#define PCI_TARGET_LINK_SPEED_GEN1 0x1
|
||
|
pci_bus_read_config_dword(bus, 0,
|
||
|
PCI_LINK_STATUS_CTRL_2_OFFSET,
|
||
|
&link_ctrl);
|
||
|
if ((link_ctrl & PCI_TARGET_LINK_SPEED_MASK) ==
|
||
|
PCI_TARGET_LINK_SPEED_GEN2) {
|
||
|
link_ctrl &= ~PCI_TARGET_LINK_SPEED_MASK;
|
||
|
link_ctrl |= PCI_TARGET_LINK_SPEED_GEN1;
|
||
|
pci_bus_write_config_dword(bus, 0,
|
||
|
PCI_LINK_STATUS_CTRL_2_OFFSET,
|
||
|
link_ctrl);
|
||
|
msleep(100);
|
||
|
|
||
|
pos = pci_bus_find_capability(bus, 0, PCI_CAP_ID_EXP);
|
||
|
pci_bus_read_config_word(bus, 0, pos + PCI_EXP_LNKSTA,
|
||
|
&link_status);
|
||
|
if (link_status & PCI_EXP_LNKSTA_NLW)
|
||
|
link_is_active = 1;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
dev_info(pcie->dev, "link: %s\n", link_is_active ? "UP" : "DOWN");
|
||
|
|
||
|
return link_is_active ? 0 : -ENODEV;
|
||
|
}
|
||
|
|
||
|
static void iproc_pcie_enable(struct iproc_pcie *pcie)
|
||
|
{
|
||
|
writel(SYS_RC_INTX_MASK, pcie->base + SYS_RC_INTX_EN);
|
||
|
}
|
||
|
|
||
|
int iproc_pcie_setup(struct iproc_pcie *pcie)
|
||
|
{
|
||
|
int ret;
|
||
|
struct pci_bus *bus;
|
||
|
|
||
|
if (!pcie || !pcie->dev || !pcie->base)
|
||
|
return -EINVAL;
|
||
|
|
||
|
if (pcie->phy) {
|
||
|
ret = phy_init(pcie->phy);
|
||
|
if (ret) {
|
||
|
dev_err(pcie->dev, "unable to initialize PCIe PHY\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = phy_power_on(pcie->phy);
|
||
|
if (ret) {
|
||
|
dev_err(pcie->dev, "unable to power on PCIe PHY\n");
|
||
|
goto err_exit_phy;
|
||
|
}
|
||
|
|
||
|
}
|
||
|
|
||
|
iproc_pcie_reset(pcie);
|
||
|
|
||
|
pcie->sysdata.private_data = pcie;
|
||
|
|
||
|
bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops,
|
||
|
&pcie->sysdata, pcie->resources);
|
||
|
if (!bus) {
|
||
|
dev_err(pcie->dev, "unable to create PCI root bus\n");
|
||
|
ret = -ENOMEM;
|
||
|
goto err_power_off_phy;
|
||
|
}
|
||
|
pcie->root_bus = bus;
|
||
|
|
||
|
ret = iproc_pcie_check_link(pcie, bus);
|
||
|
if (ret) {
|
||
|
dev_err(pcie->dev, "no PCIe EP device detected\n");
|
||
|
goto err_rm_root_bus;
|
||
|
}
|
||
|
|
||
|
iproc_pcie_enable(pcie);
|
||
|
|
||
|
pci_scan_child_bus(bus);
|
||
|
pci_assign_unassigned_bus_resources(bus);
|
||
|
pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
|
||
|
pci_bus_add_devices(bus);
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
err_rm_root_bus:
|
||
|
pci_stop_root_bus(bus);
|
||
|
pci_remove_root_bus(bus);
|
||
|
|
||
|
err_power_off_phy:
|
||
|
if (pcie->phy)
|
||
|
phy_power_off(pcie->phy);
|
||
|
err_exit_phy:
|
||
|
if (pcie->phy)
|
||
|
phy_exit(pcie->phy);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
EXPORT_SYMBOL(iproc_pcie_setup);
|
||
|
|
||
|
int iproc_pcie_remove(struct iproc_pcie *pcie)
|
||
|
{
|
||
|
pci_stop_root_bus(pcie->root_bus);
|
||
|
pci_remove_root_bus(pcie->root_bus);
|
||
|
|
||
|
if (pcie->phy) {
|
||
|
phy_power_off(pcie->phy);
|
||
|
phy_exit(pcie->phy);
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
EXPORT_SYMBOL(iproc_pcie_remove);
|
||
|
|
||
|
MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
|
||
|
MODULE_DESCRIPTION("Broadcom iPROC PCIe common driver");
|
||
|
MODULE_LICENSE("GPL v2");
|