openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/net/dsa/sja1105/Kconfig

26 lines
978 B
Plaintext
Raw Normal View History

treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 20:07:45 +08:00
# SPDX-License-Identifier: GPL-2.0-only
net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch At this moment the following is supported: * Link state management through phylib * Autonomous L2 forwarding managed through iproute2 bridge commands. IP termination must be done currently through the master netdevice, since the switch is unmanaged at this point and using DSA_TAG_PROTO_NONE. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Georg Waibel <georg.waibel@sensor-technik.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03 04:23:30 +08:00
config NET_DSA_SJA1105
tristate "NXP SJA1105 Ethernet switch family support"
depends on NET_DSA && SPI
net: dsa: sja1105: Add support for traffic through standalone ports In order to support this, we are creating a make-shift switch tag out of a VLAN trunk configured on the CPU port. Termination of normal traffic on switch ports only works when not under a vlan_filtering bridge. Termination of management (PTP, BPDU) traffic works under all circumstances because it uses a different tagging mechanism (incl_srcpt). We are making use of the generic CONFIG_NET_DSA_TAG_8021Q code and leveraging it from our own CONFIG_NET_DSA_TAG_SJA1105. There are two types of traffic: regular and link-local. The link-local traffic received on the CPU port is trapped from the switch's regular forwarding decisions because it matched one of the two DMAC filters for management traffic. On transmission, the switch requires special massaging for these link-local frames. Due to a weird implementation of the switching IP, by default it drops link-local frames that originate on the CPU port. It needs to be told where to forward them to, through an SPI command ("management route") that is valid for only a single frame. So when we're sending link-local traffic, we are using the dsa_defer_xmit mechanism. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 18:19:27 +08:00
select NET_DSA_TAG_SJA1105
net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch At this moment the following is supported: * Link state management through phylib * Autonomous L2 forwarding managed through iproute2 bridge commands. IP termination must be done currently through the master netdevice, since the switch is unmanaged at this point and using DSA_TAG_PROTO_NONE. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Georg Waibel <georg.waibel@sensor-technik.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03 04:23:30 +08:00
select PACKING
select CRC32
help
This is the driver for the NXP SJA1105 automotive Ethernet switch
family. These are 5-port devices and are managed over an SPI
interface. Probing is handled based on OF bindings and so is the
net: dsa: sja1105: Update some comments about PHYLIB Since the driver is now using PHYLINK exclusively, it makes sense to remove all references to it and replace them with PHYLINK. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-08 21:03:42 +08:00
linkage to PHYLINK. The driver supports the following revisions:
net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch At this moment the following is supported: * Link state management through phylib * Autonomous L2 forwarding managed through iproute2 bridge commands. IP termination must be done currently through the master netdevice, since the switch is unmanaged at this point and using DSA_TAG_PROTO_NONE. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Georg Waibel <georg.waibel@sensor-technik.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03 04:23:30 +08:00
- SJA1105E (Gen. 1, No TT-Ethernet)
- SJA1105T (Gen. 1, TT-Ethernet)
- SJA1105P (Gen. 2, No SGMII, No TT-Ethernet)
- SJA1105Q (Gen. 2, No SGMII, TT-Ethernet)
- SJA1105R (Gen. 2, SGMII, No TT-Ethernet)
- SJA1105S (Gen. 2, SGMII, TT-Ethernet)
net: dsa: sja1105: Add support for the PTP clock The design of this PHC driver is influenced by the switch's behavior w.r.t. timestamping. It exposes two PTP counters, one free-running (PTPTSCLK) and the other offset- and frequency-corrected in hardware through PTPCLKVAL, PTPCLKADD and PTPCLKRATE. The MACs can sample either of these for frame timestamps. However, the user manual warns that taking timestamps based on the corrected clock is less than useful, as the switch can deliver corrupted timestamps in a variety of circumstances. Therefore, this PHC uses the free-running PTPTSCLK together with a timecounter/cyclecounter structure that translates it into a software time domain. Thus, the settime/adjtime and adjfine callbacks are hardware no-ops. The timestamps (introduced in a further patch) will also be translated to the correct time domain before being handed over to the userspace PTP stack. The introduction of a second set of PHC operations that operate on the hardware PTPCLKVAL/PTPCLKADD/PTPCLKRATE in the future is somewhat unavoidable, as the TTEthernet core uses the corrected PTP time domain. However, the free-running counter + timecounter structure combination will suffice for now, as the resulting timestamps yield a sub-50 ns synchronization offset in steady state using linuxptp. For this patch, in absence of frame timestamping, the operations of the switch PHC were tested by syncing it to the system time as a local slave clock with: phc2sys -s CLOCK_REALTIME -c swp2 -O 0 -m -S 0.01 Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-08 20:04:34 +08:00
config NET_DSA_SJA1105_PTP
net: dsa: sja1105: fix ptp link error Due to a reversed dependency, it is possible to build the lower ptp driver as a loadable module and the actual driver using it as built-in, causing a link error: drivers/net/dsa/sja1105/sja1105_spi.o: In function `sja1105_static_config_upload': sja1105_spi.c:(.text+0x6f0): undefined reference to `sja1105_ptp_reset' drivers/net/dsa/sja1105/sja1105_spi.o:(.data+0x2d4): undefined reference to `sja1105et_ptp_cmd' drivers/net/dsa/sja1105/sja1105_spi.o:(.data+0x604): undefined reference to `sja1105pqrs_ptp_cmd' drivers/net/dsa/sja1105/sja1105_main.o: In function `sja1105_remove': sja1105_main.c:(.text+0x8d4): undefined reference to `sja1105_ptp_clock_unregister' drivers/net/dsa/sja1105/sja1105_main.o: In function `sja1105_rxtstamp_work': sja1105_main.c:(.text+0x964): undefined reference to `sja1105_tstamp_reconstruct' drivers/net/dsa/sja1105/sja1105_main.o: In function `sja1105_setup': sja1105_main.c:(.text+0xb7c): undefined reference to `sja1105_ptp_clock_register' drivers/net/dsa/sja1105/sja1105_main.o: In function `sja1105_port_deferred_xmit': sja1105_main.c:(.text+0x1fa0): undefined reference to `sja1105_ptpegr_ts_poll' sja1105_main.c:(.text+0x1fc4): undefined reference to `sja1105_tstamp_reconstruct' drivers/net/dsa/sja1105/sja1105_main.o:(.rodata+0x5b0): undefined reference to `sja1105_get_ts_info' Change the Makefile logic to always build the ptp module the same way as the rest. Another option would be to just add it to the same module and remove the exports, but I don't know if there was a good reason to keep them separate. Fixes: bb77f36ac21d ("net: dsa: sja1105: Add support for the PTP clock") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-17 21:14:10 +08:00
bool "Support for the PTP clock on the NXP SJA1105 Ethernet switch"
net: dsa: sja1105: Add support for the PTP clock The design of this PHC driver is influenced by the switch's behavior w.r.t. timestamping. It exposes two PTP counters, one free-running (PTPTSCLK) and the other offset- and frequency-corrected in hardware through PTPCLKVAL, PTPCLKADD and PTPCLKRATE. The MACs can sample either of these for frame timestamps. However, the user manual warns that taking timestamps based on the corrected clock is less than useful, as the switch can deliver corrupted timestamps in a variety of circumstances. Therefore, this PHC uses the free-running PTPTSCLK together with a timecounter/cyclecounter structure that translates it into a software time domain. Thus, the settime/adjtime and adjfine callbacks are hardware no-ops. The timestamps (introduced in a further patch) will also be translated to the correct time domain before being handed over to the userspace PTP stack. The introduction of a second set of PHC operations that operate on the hardware PTPCLKVAL/PTPCLKADD/PTPCLKRATE in the future is somewhat unavoidable, as the TTEthernet core uses the corrected PTP time domain. However, the free-running counter + timecounter structure combination will suffice for now, as the resulting timestamps yield a sub-50 ns synchronization offset in steady state using linuxptp. For this patch, in absence of frame timestamping, the operations of the switch PHC were tested by syncing it to the system time as a local slave clock with: phc2sys -s CLOCK_REALTIME -c swp2 -O 0 -m -S 0.01 Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-08 20:04:34 +08:00
depends on NET_DSA_SJA1105
help
This enables support for timestamping and PTP clock manipulations in
the SJA1105 DSA driver.