linux/arch/m68k/platform/coldfire/head.S

299 lines
7.4 KiB
ArmAsm
Raw Normal View History

/*****************************************************************************/
/*
* head.S -- common startup code for ColdFire CPUs.
*
* (C) Copyright 1999-2011, Greg Ungerer <gerg@snapgear.com>.
*/
/*****************************************************************************/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/asm-offsets.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfmmu.h>
Fix IRQ flag handling naming Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-10-07 21:08:55 +08:00
#include <asm/thread_info.h>
/*****************************************************************************/
/*
* If we don't have a fixed memory size, then lets build in code
* to auto detect the DRAM size. Obviously this is the preferred
* method, and should work for most boards. It won't work for those
* that do not have their RAM starting at address 0, and it only
* works on SDRAM (not boards fitted with SRAM).
*/
#if CONFIG_RAMSIZE != 0
.macro GET_MEM_SIZE
movel #CONFIG_RAMSIZE,%d0 /* hard coded memory size */
.endm
#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
defined(CONFIG_M5249) || defined(CONFIG_M525x) || \
defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
defined(CONFIG_M5307) || defined(CONFIG_M5407)
/*
* Not all these devices have exactly the same DRAM controller,
* but the DCMR register is virtually identical - give or take
* a couple of bits. The only exception is the 5272 devices, their
* DRAM controller is quite different.
*/
.macro GET_MEM_SIZE
movel MCFSIM_DMR0,%d0 /* get mask for 1st bank */
btst #0,%d0 /* check if region enabled */
beq 1f
andl #0xfffc0000,%d0
beq 1f
addl #0x00040000,%d0 /* convert mask to size */
1:
movel MCFSIM_DMR1,%d1 /* get mask for 2nd bank */
btst #0,%d1 /* check if region enabled */
beq 2f
andl #0xfffc0000,%d1
beq 2f
addl #0x00040000,%d1
addl %d1,%d0 /* total mem size in d0 */
2:
.endm
#elif defined(CONFIG_M5272)
.macro GET_MEM_SIZE
movel MCFSIM_CSOR7,%d0 /* get SDRAM address mask */
andil #0xfffff000,%d0 /* mask out chip select options */
negl %d0 /* negate bits */
.endm
#elif defined(CONFIG_M520x)
.macro GET_MEM_SIZE
clrl %d0
movel MCFSIM_SDCS0, %d2 /* Get SDRAM chip select 0 config */
andl #0x1f, %d2 /* Get only the chip select size */
beq 3f /* Check if it is enabled */
addql #1, %d2 /* Form exponent */
moveql #1, %d0
lsll %d2, %d0 /* 2 ^ exponent */
3:
movel MCFSIM_SDCS1, %d2 /* Get SDRAM chip select 1 config */
andl #0x1f, %d2 /* Get only the chip select size */
beq 4f /* Check if it is enabled */
addql #1, %d2 /* Form exponent */
moveql #1, %d1
lsll %d2, %d1 /* 2 ^ exponent */
addl %d1, %d0 /* Total size of SDRAM in d0 */
4:
.endm
#else
#error "ERROR: I don't know how to probe your boards memory size?"
#endif
/*****************************************************************************/
/*
* Boards and platforms can do specific early hardware setup if
* they need to. Most don't need this, define away if not required.
*/
#ifndef PLATFORM_SETUP
#define PLATFORM_SETUP
#endif
/*****************************************************************************/
.global _start
.global _rambase
.global _ramvec
.global _ramstart
.global _ramend
#if defined(CONFIG_UBOOT)
.global _init_sp
#endif
/*****************************************************************************/
.data
/*
* During startup we store away the RAM setup. These are not in the
* bss, since their values are determined and written before the bss
* has been cleared.
*/
_rambase:
.long 0
_ramvec:
.long 0
_ramstart:
.long 0
_ramend:
.long 0
#if defined(CONFIG_UBOOT)
_init_sp:
.long 0
#endif
/*****************************************************************************/
__HEAD
#ifdef CONFIG_MMU
_start0:
jmp _start
.global kernel_pg_dir
.equ kernel_pg_dir,_start0
.equ .,_start0+0x1000
#endif
/*
* This is the codes first entry point. This is where it all
* begins...
*/
_start:
nop /* filler */
movew #0x2700, %sr /* no interrupts */
movel #CACHE_INIT,%d0 /* disable cache */
movec %d0,%CACR
nop
#if defined(CONFIG_UBOOT)
movel %sp,_init_sp /* save initial stack pointer */
#endif
#ifdef CONFIG_MBAR
movel #CONFIG_MBAR+1,%d0 /* configured MBAR address */
movec %d0,%MBAR /* set it */
#endif
/*
* Do any platform or board specific setup now. Most boards
* don't need anything. Those exceptions are define this in
* their board specific includes.
*/
PLATFORM_SETUP
/*
* Create basic memory configuration. Set VBR accordingly,
* and size memory.
*/
movel #CONFIG_VECTORBASE,%a7
movec %a7,%VBR /* set vectors addr */
movel %a7,_ramvec
movel #CONFIG_RAMBASE,%a7 /* mark the base of RAM */
movel %a7,_rambase
GET_MEM_SIZE /* macro code determines size */
addl %a7,%d0
movel %d0,_ramend /* set end ram addr */
/*
* Now that we know what the memory is, lets enable cache
* and get things moving. This is Coldfire CPU specific. Not
* all version cores have identical cache register setup. But
* it is very similar. Define the exact settings in the headers
* then the code here is the same for all.
*/
movel #ACR0_MODE,%d0 /* set RAM region for caching */
movec %d0,%ACR0
movel #ACR1_MODE,%d0 /* anything else to cache? */
movec %d0,%ACR1
#ifdef ACR2_MODE
movel #ACR2_MODE,%d0
movec %d0,%ACR2
movel #ACR3_MODE,%d0
movec %d0,%ACR3
#endif
movel #CACHE_MODE,%d0 /* enable cache */
movec %d0,%CACR
nop
#ifdef CONFIG_MMU
/*
* Identity mapping for the kernel region.
*/
movel #(MMUBASE+1),%d0 /* enable MMUBAR registers */
movec %d0,%MMUBAR
movel #MMUOR_CA,%d0 /* clear TLB entries */
movel %d0,MMUOR
movel #0,%d0 /* set ASID to 0 */
movec %d0,%asid
movel #MMUCR_EN,%d0 /* Enable the identity map */
movel %d0,MMUCR
nop /* sync i-pipeline */
movel #_vstart,%a0 /* jump to "virtual" space */
jmp %a0@
_vstart:
#endif /* CONFIG_MMU */
#ifdef CONFIG_ROMFS_FS
/*
* Move ROM filesystem above bss :-)
*/
lea __bss_start,%a0 /* get start of bss */
lea __bss_stop,%a1 /* set up destination */
movel %a0,%a2 /* copy of bss start */
movel 8(%a0),%d0 /* get size of ROMFS */
addql #8,%d0 /* allow for rounding */
andl #0xfffffffc, %d0 /* whole words */
addl %d0,%a0 /* copy from end */
addl %d0,%a1 /* copy from end */
movel %a1,_ramstart /* set start of ram */
_copy_romfs:
movel -(%a0),%d0 /* copy dword */
movel %d0,-(%a1)
cmpl %a0,%a2 /* check if at end */
bne _copy_romfs
#else /* CONFIG_ROMFS_FS */
lea __bss_stop,%a1
movel %a1,_ramstart
#endif /* CONFIG_ROMFS_FS */
/*
* Zero out the bss region.
*/
lea __bss_start,%a0 /* get start of bss */
lea __bss_stop,%a1 /* get end of bss */
clrl %d0 /* set value */
_clear_bss:
movel %d0,(%a0)+ /* clear each word */
cmpl %a0,%a1 /* check if at end */
bne _clear_bss
/*
* Load the current task pointer and stack.
*/
lea init_thread_union,%a0
lea THREAD_SIZE(%a0),%sp
#ifdef CONFIG_MMU
.global m68k_cputype
.global m68k_mmutype
.global m68k_fputype
.global m68k_machtype
movel #CPU_COLDFIRE,%d0
movel %d0,m68k_cputype /* Mark us as a ColdFire */
movel #MMU_COLDFIRE,%d0
movel %d0,m68k_mmutype
movel #FPU_COLDFIRE,%d0
movel %d0,m68k_fputype
movel #MACH_M54XX,%d0
movel %d0,m68k_machtype /* Mark us as a 54xx machine */
lea init_task,%a2 /* Set "current" init task */
#endif
/*
* Assember start up done, start code proper.
*/
jsr start_kernel /* start Linux kernel */
_exit:
jmp _exit /* should never get here */
/*****************************************************************************/