linux/sound/firewire/Kconfig

124 lines
3.6 KiB
Plaintext
Raw Normal View History

menuconfig SND_FIREWIRE
bool "FireWire sound devices"
depends on FIREWIRE
default y
help
Support for IEEE-1394/FireWire/iLink sound devices.
if SND_FIREWIRE && FIREWIRE
config SND_FIREWIRE_LIB
tristate
depends on SND_PCM
config SND_DICE
tristate "DICE-based DACs (EXPERIMENTAL)"
select SND_HWDEP
select SND_PCM
select SND_FIREWIRE_LIB
help
Say Y here to include support for many DACs based on the DICE
chip family (DICE-II/Jr/Mini) from TC Applied Technologies.
At the moment, this driver supports playback only. If you
want to use devices that support capturing, use FFADO instead.
To compile this driver as a module, choose M here: the module
will be called snd-dice.
config SND_FIREWIRE_SPEAKERS
tristate "FireWire speakers"
select SND_PCM
select SND_FIREWIRE_LIB
help
Say Y here to include support for the Griffin FireWave Surround
and the LaCie FireWire Speakers.
To compile this driver as a module, choose M here: the module
will be called snd-firewire-speakers.
config SND_ISIGHT
tristate "Apple iSight microphone"
select SND_PCM
select SND_FIREWIRE_LIB
help
Say Y here to include support for the front and rear microphones
of the Apple iSight web camera.
To compile this driver as a module, choose M here: the module
will be called snd-isight.
config SND_SCS1X
tristate "Stanton Control System 1 MIDI"
select SND_PCM
select SND_RAWMIDI
select SND_FIREWIRE_LIB
help
Say Y here to include support for the MIDI ports of the Stanton
SCS.1d/SCS.1m DJ controllers. (SCS.1m audio is still handled
by FFADO.)
To compile this driver as a module, choose M here: the module
will be called snd-scs1x.
config SND_FIREWORKS
tristate "Echo Fireworks board module support"
select SND_FIREWIRE_LIB
select SND_RAWMIDI
select SND_PCM
select SND_HWDEP
help
Say Y here to include support for FireWire devices based
on Echo Digital Audio Fireworks board:
* Mackie Onyx 400F/1200F
* Echo AudioFire12/8(until 2009 July)
* Echo AudioFire2/4/Pre8/8(since 2009 July)
* Echo Fireworks 8/HDMI
* Gibson Robot Interface Pack/GoldTop
To compile this driver as a module, choose M here: the module
will be called snd-fireworks.
ALSA: bebob: Add skelton for BeBoB based devices This commit adds a new driver for BeBoB based devices with no specific operations. Currently this driver just create/remove card instance according to callbacks. BeBoB is 'BridgeCo enhanced Breakout Box'. This is installed to firewire devices with DM1000/DM1100/DM1500 chipset. It gives common way for host system to handle BeBoB based devices. Current supported devices: - Edirol FA-66/FA-101 - PreSonus FIREBOX/FIREPOD/FP10/Inspire1394 - BridgeCo RDAudio1/Audio5 - Mackie Onyx 1220/1620/1640 (Firewire I/O Card) - Mackie d.2 (Firewire Option) - Stanton FinalScratch 2 (ScratchAmp) - Tascam IF-FW DM - Behringer XENIX UFX 1204/1604 - Behringer Digital Mixer X32 series (X-UF Card) - Apogee Rosetta 200/Rosetta 400 (X-FireWire card) - Apogee DA-16X/AD-16X/DD-16X (X-FireWire card) - Apogee Ensemble - ESI Quotafire610 - AcousticReality eARMasterOne - CME MatrixKFW - Phonix Helix Board 12 MkII/18 MkII/24 MkII - Phonic Helix Board 12 Universal/18 Universal/24 Universal - Lynx Aurora 8/16 (LT-FW) - ICON FireXon - PrismSound Orpheus/ADA-8XR Devices possible to be supported if identifying IDs: - Apogee Mini-Me Firewire/Mini-DAC Firewire - Behringer F-Control Audio 610/1616 - Cakewalk Sonar Power Studio 66 - CME UF400e - ESI Quotafire XL - Infrasonic DewX/Windy6 - Mackie Digital X Bus x.200/400 - Phonic Helix Board 12/18/24 - Phonic FireFly 202/302 - Rolf Spuler Firewire Guitar Tested-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:14 +08:00
config SND_BEBOB
tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware"
select SND_FIREWIRE_LIB
select SND_RAWMIDI
select SND_PCM
select SND_HWDEP
ALSA: bebob: Add skelton for BeBoB based devices This commit adds a new driver for BeBoB based devices with no specific operations. Currently this driver just create/remove card instance according to callbacks. BeBoB is 'BridgeCo enhanced Breakout Box'. This is installed to firewire devices with DM1000/DM1100/DM1500 chipset. It gives common way for host system to handle BeBoB based devices. Current supported devices: - Edirol FA-66/FA-101 - PreSonus FIREBOX/FIREPOD/FP10/Inspire1394 - BridgeCo RDAudio1/Audio5 - Mackie Onyx 1220/1620/1640 (Firewire I/O Card) - Mackie d.2 (Firewire Option) - Stanton FinalScratch 2 (ScratchAmp) - Tascam IF-FW DM - Behringer XENIX UFX 1204/1604 - Behringer Digital Mixer X32 series (X-UF Card) - Apogee Rosetta 200/Rosetta 400 (X-FireWire card) - Apogee DA-16X/AD-16X/DD-16X (X-FireWire card) - Apogee Ensemble - ESI Quotafire610 - AcousticReality eARMasterOne - CME MatrixKFW - Phonix Helix Board 12 MkII/18 MkII/24 MkII - Phonic Helix Board 12 Universal/18 Universal/24 Universal - Lynx Aurora 8/16 (LT-FW) - ICON FireXon - PrismSound Orpheus/ADA-8XR Devices possible to be supported if identifying IDs: - Apogee Mini-Me Firewire/Mini-DAC Firewire - Behringer F-Control Audio 610/1616 - Cakewalk Sonar Power Studio 66 - CME UF400e - ESI Quotafire XL - Infrasonic DewX/Windy6 - Mackie Digital X Bus x.200/400 - Phonic Helix Board 12/18/24 - Phonic FireFly 202/302 - Rolf Spuler Firewire Guitar Tested-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:14 +08:00
help
Say Y here to include support for FireWire devices based
on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware:
* Edirol FA-66/FA-101
* PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
* BridgeCo RDAudio1/Audio5
* Mackie Onyx 1220/1620/1640 (Firewire I/O Card)
* Mackie d.2 (Firewire Option)
* Stanton FinalScratch 2 (ScratchAmp)
* Tascam IF-FW/DM
* Behringer XENIX UFX 1204/1604
* Behringer Digital Mixer X32 series (X-UF Card)
* Apogee Rosetta 200/400 (X-FireWire card)
* Apogee DA/AD/DD-16X (X-FireWire card)
* Apogee Ensemble
* ESI Quotafire610
* AcousticReality eARMasterOne
* CME MatrixKFW
* Phonic Helix Board 12 MkII/18 MkII/24 MkII
* Phonic Helix Board 12 Universal/18 Universal/24 Universal
* Lynx Aurora 8/16 (LT-FW)
* ICON FireXon
* PrismSound Orpheus/ADA-8XR
* TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW
* Terratec EWS MIC2/EWS MIC4
* Terratec Aureon 7.1 Firewire
* Yamaha GO44/GO46
* Focusrite Saffire/Saffire LE/SaffirePro10 IO/SaffirePro26 IO
ALSA: bebob: Add support for M-Audio usual Firewire series This commit allows this driver to support some models which M-Audio produces with DM1000/DM1000E with usual firmware. They are: - Firewire 410 - Firewire AudioPhile - Firewire Solo - Ozonic - NRV10 - FirewireLightBridge According to a person who worked in BridgeCo, some models are produced with 'Pre-BeBoB'. This means that these products were released before BeBoB was officially produced, and later BeBoB specification was formed. So these models have some quirks. M-Audio usual firmware quirks: - Just after powering on, 'Firewire 410' waits to download firmware. This state is changed when receiving cue. Then bus reset is generated and the device is recognized as a different model with the uploaded firmware. - 'Firewire Audiophile' also waits to download firmware but its vendor id/model id is the same as the one after loading firmware. - The information of channel mapping for MIDI conformant data channel is invalid against BridgeCo specification. This commit adds some codes for these quirks but don't support to upload firmware. This commit also adds specific operations to get metering information. The metering information also includes status of clock synchronization if the model supports to switch source of clock. The specification of FirewireLightBridge is unknown. So in this time, normal operations are applied for this model. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:25 +08:00
* M-Audio Firewire410/AudioPhile/Solo
* M-Audio Ozonic/NRV10/ProfireLightBridge
* M-Audio Firewire 1814/ProjectMix IO
ALSA: bebob: Add skelton for BeBoB based devices This commit adds a new driver for BeBoB based devices with no specific operations. Currently this driver just create/remove card instance according to callbacks. BeBoB is 'BridgeCo enhanced Breakout Box'. This is installed to firewire devices with DM1000/DM1100/DM1500 chipset. It gives common way for host system to handle BeBoB based devices. Current supported devices: - Edirol FA-66/FA-101 - PreSonus FIREBOX/FIREPOD/FP10/Inspire1394 - BridgeCo RDAudio1/Audio5 - Mackie Onyx 1220/1620/1640 (Firewire I/O Card) - Mackie d.2 (Firewire Option) - Stanton FinalScratch 2 (ScratchAmp) - Tascam IF-FW DM - Behringer XENIX UFX 1204/1604 - Behringer Digital Mixer X32 series (X-UF Card) - Apogee Rosetta 200/Rosetta 400 (X-FireWire card) - Apogee DA-16X/AD-16X/DD-16X (X-FireWire card) - Apogee Ensemble - ESI Quotafire610 - AcousticReality eARMasterOne - CME MatrixKFW - Phonix Helix Board 12 MkII/18 MkII/24 MkII - Phonic Helix Board 12 Universal/18 Universal/24 Universal - Lynx Aurora 8/16 (LT-FW) - ICON FireXon - PrismSound Orpheus/ADA-8XR Devices possible to be supported if identifying IDs: - Apogee Mini-Me Firewire/Mini-DAC Firewire - Behringer F-Control Audio 610/1616 - Cakewalk Sonar Power Studio 66 - CME UF400e - ESI Quotafire XL - Infrasonic DewX/Windy6 - Mackie Digital X Bus x.200/400 - Phonic Helix Board 12/18/24 - Phonic FireFly 202/302 - Rolf Spuler Firewire Guitar Tested-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:14 +08:00
To compile this driver as a module, choose M here: the module
will be called snd-bebob.
endif # SND_FIREWIRE