linux/drivers/usb/host/whci/whci-hc.h

402 lines
14 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Wireless Host Controller (WHC) data structures.
*
* Copyright (C) 2007 Cambridge Silicon Radio Ltd.
*/
#ifndef _WHCI_WHCI_HC_H
#define _WHCI_WHCI_HC_H
#include <linux/list.h>
/**
* WHCI_PAGE_SIZE - page size use by WHCI
*
* WHCI assumes that host system uses pages of 4096 octets.
*/
#define WHCI_PAGE_SIZE 4096
/**
* QTD_MAX_TXFER_SIZE - max number of bytes to transfer with a single
* qtd.
*
* This is 2^20 - 1.
*/
#define QTD_MAX_XFER_SIZE 1048575
/**
* struct whc_qtd - Queue Element Transfer Descriptors (qTD)
*
* This describes the data for a bulk, control or interrupt transfer.
*
* [WHCI] section 3.2.4
*/
struct whc_qtd {
__le32 status; /*< remaining transfer len and transfer status */
__le32 options;
__le64 page_list_ptr; /*< physical pointer to data buffer page list*/
__u8 setup[8]; /*< setup data for control transfers */
} __attribute__((packed));
#define QTD_STS_ACTIVE (1 << 31) /* enable execution of transaction */
#define QTD_STS_HALTED (1 << 30) /* transfer halted */
#define QTD_STS_DBE (1 << 29) /* data buffer error */
#define QTD_STS_BABBLE (1 << 28) /* babble detected */
#define QTD_STS_RCE (1 << 27) /* retry count exceeded */
#define QTD_STS_LAST_PKT (1 << 26) /* set Last Packet Flag in WUSB header */
#define QTD_STS_INACTIVE (1 << 25) /* queue set is marked inactive */
#define QTD_STS_IALT_VALID (1 << 23) /* iAlt field is valid */
#define QTD_STS_IALT(i) (QTD_STS_IALT_VALID | ((i) << 20)) /* iAlt field */
#define QTD_STS_LEN(l) ((l) << 0) /* transfer length */
#define QTD_STS_TO_LEN(s) ((s) & 0x000fffff)
#define QTD_OPT_IOC (1 << 1) /* page_list_ptr points to buffer directly */
#define QTD_OPT_SMALL (1 << 0) /* interrupt on complete */
/**
* struct whc_itd - Isochronous Queue Element Transfer Descriptors (iTD)
*
* This describes the data and other parameters for an isochronous
* transfer.
*
* [WHCI] section 3.2.5
*/
struct whc_itd {
__le16 presentation_time; /*< presentation time for OUT transfers */
__u8 num_segments; /*< number of data segments in segment list */
__u8 status; /*< command execution status */
__le32 options; /*< misc transfer options */
__le64 page_list_ptr; /*< physical pointer to data buffer page list */
__le64 seg_list_ptr; /*< physical pointer to segment list */
} __attribute__((packed));
#define ITD_STS_ACTIVE (1 << 7) /* enable execution of transaction */
#define ITD_STS_DBE (1 << 5) /* data buffer error */
#define ITD_STS_BABBLE (1 << 4) /* babble detected */
#define ITD_STS_INACTIVE (1 << 1) /* queue set is marked inactive */
#define ITD_OPT_IOC (1 << 1) /* interrupt on complete */
#define ITD_OPT_SMALL (1 << 0) /* page_list_ptr points to buffer directly */
/**
* Page list entry.
*
* A TD's page list must contain sufficient page list entries for the
* total data length in the TD.
*
* [WHCI] section 3.2.4.3
*/
struct whc_page_list_entry {
__le64 buf_ptr; /*< physical pointer to buffer */
} __attribute__((packed));
/**
* struct whc_seg_list_entry - Segment list entry.
*
* Describes a portion of the data buffer described in the containing
* qTD's page list.
*
* seg_ptr = qtd->page_list_ptr[qtd->seg_list_ptr[seg].idx].buf_ptr
* + qtd->seg_list_ptr[seg].offset;
*
* Segments can't cross page boundries.
*
* [WHCI] section 3.2.5.5
*/
struct whc_seg_list_entry {
__le16 len; /*< segment length */
__u8 idx; /*< index into page list */
__u8 status; /*< segment status */
__le16 offset; /*< 12 bit offset into page */
} __attribute__((packed));
/**
* struct whc_qhead - endpoint and status information for a qset.
*
* [WHCI] section 3.2.6
*/
struct whc_qhead {
__le64 link; /*< next qset in list */
__le32 info1;
__le32 info2;
__le32 info3;
__le16 status;
__le16 err_count; /*< transaction error count */
__le32 cur_window;
__le32 scratch[3]; /*< h/w scratch area */
union {
struct whc_qtd qtd;
struct whc_itd itd;
} overlay;
} __attribute__((packed));
#define QH_LINK_PTR_MASK (~0x03Full)
#define QH_LINK_PTR(ptr) ((ptr) & QH_LINK_PTR_MASK)
#define QH_LINK_IQS (1 << 4) /* isochronous queue set */
#define QH_LINK_NTDS(n) (((n) - 1) << 1) /* number of TDs in queue set */
#define QH_LINK_T (1 << 0) /* last queue set in periodic schedule list */
#define QH_INFO1_EP(e) ((e) << 0) /* endpoint number */
#define QH_INFO1_DIR_IN (1 << 4) /* IN transfer */
#define QH_INFO1_DIR_OUT (0 << 4) /* OUT transfer */
#define QH_INFO1_TR_TYPE_CTRL (0x0 << 5) /* control transfer */
#define QH_INFO1_TR_TYPE_ISOC (0x1 << 5) /* isochronous transfer */
#define QH_INFO1_TR_TYPE_BULK (0x2 << 5) /* bulk transfer */
#define QH_INFO1_TR_TYPE_INT (0x3 << 5) /* interrupt */
#define QH_INFO1_TR_TYPE_LP_INT (0x7 << 5) /* low power interrupt */
#define QH_INFO1_DEV_INFO_IDX(i) ((i) << 8) /* index into device info buffer */
#define QH_INFO1_SET_INACTIVE (1 << 15) /* set inactive after transfer */
#define QH_INFO1_MAX_PKT_LEN(l) ((l) << 16) /* maximum packet length */
#define QH_INFO2_BURST(b) ((b) << 0) /* maximum burst length */
#define QH_INFO2_DBP(p) ((p) << 5) /* data burst policy (see [WUSB] table 5-7) */
#define QH_INFO2_MAX_COUNT(c) ((c) << 8) /* max isoc/int pkts per zone */
#define QH_INFO2_RQS (1 << 15) /* reactivate queue set */
#define QH_INFO2_MAX_RETRY(r) ((r) << 16) /* maximum transaction retries */
#define QH_INFO2_MAX_SEQ(s) ((s) << 20) /* maximum sequence number */
#define QH_INFO3_MAX_DELAY(d) ((d) << 0) /* maximum stream delay in 125 us units (isoc only) */
#define QH_INFO3_INTERVAL(i) ((i) << 16) /* segment interval in 125 us units (isoc only) */
#define QH_INFO3_TX_RATE(r) ((r) << 24) /* PHY rate (see [ECMA-368] section 10.3.1.1) */
#define QH_INFO3_TX_PWR(p) ((p) << 29) /* transmit power (see [WUSB] section 5.2.1.2) */
#define QH_STATUS_FLOW_CTRL (1 << 15)
#define QH_STATUS_ICUR(i) ((i) << 5)
#define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7)
#define QH_STATUS_SEQ_MASK 0x1f
/**
* usb_pipe_to_qh_type - USB core pipe type to QH transfer type
*
* Returns the QH type field for a USB core pipe type.
*/
static inline unsigned usb_pipe_to_qh_type(unsigned pipe)
{
static const unsigned type[] = {
[PIPE_ISOCHRONOUS] = QH_INFO1_TR_TYPE_ISOC,
[PIPE_INTERRUPT] = QH_INFO1_TR_TYPE_INT,
[PIPE_CONTROL] = QH_INFO1_TR_TYPE_CTRL,
[PIPE_BULK] = QH_INFO1_TR_TYPE_BULK,
};
return type[usb_pipetype(pipe)];
}
/**
* Maxiumum number of TDs in a qset.
*/
#define WHCI_QSET_TD_MAX 8
/**
* struct whc_qset - WUSB data transfers to a specific endpoint
* @qh: the QHead of this qset
* @qtd: up to 8 qTDs (for qsets for control, bulk and interrupt
* transfers)
* @itd: up to 8 iTDs (for qsets for isochronous transfers)
* @qset_dma: DMA address for this qset
* @whc: WHCI HC this qset is for
* @ep: endpoint
* @stds: list of sTDs queued to this qset
* @ntds: number of qTDs queued (not necessarily the same as nTDs
* field in the QH)
* @td_start: index of the first qTD in the list
* @td_end: index of next free qTD in the list (provided
* ntds < WHCI_QSET_TD_MAX)
*
* Queue Sets (qsets) are added to the asynchronous schedule list
* (ASL) or the periodic zone list (PZL).
*
* qsets may contain up to 8 TDs (either qTDs or iTDs as appropriate).
* Each TD may refer to at most 1 MiB of data. If a single transfer
* has > 8MiB of data, TDs can be reused as they are completed since
* the TD list is used as a circular buffer. Similarly, several
* (smaller) transfers may be queued in a qset.
*
* WHCI controllers may cache portions of the qsets in the ASL and
* PZL, requiring the WHCD to inform the WHC that the lists have been
* updated (fields changed or qsets inserted or removed). For safe
* insertion and removal of qsets from the lists the schedule must be
* stopped to avoid races in updating the QH link pointers.
*
* Since the HC is free to execute qsets in any order, all transfers
* to an endpoint should use the same qset to ensure transfers are
* executed in the order they're submitted.
*
* [WHCI] section 3.2.3
*/
struct whc_qset {
struct whc_qhead qh;
union {
struct whc_qtd qtd[WHCI_QSET_TD_MAX];
struct whc_itd itd[WHCI_QSET_TD_MAX];
};
/* private data for WHCD */
dma_addr_t qset_dma;
struct whc *whc;
struct usb_host_endpoint *ep;
struct list_head stds;
int ntds;
int td_start;
int td_end;
struct list_head list_node;
unsigned in_sw_list:1;
unsigned in_hw_list:1;
unsigned remove:1;
unsigned reset:1;
struct urb *pause_after_urb;
struct completion remove_complete;
uint16_t max_packet;
uint8_t max_burst;
uint8_t max_seq;
};
static inline void whc_qset_set_link_ptr(u64 *ptr, u64 target)
{
if (target)
*ptr = (*ptr & ~(QH_LINK_PTR_MASK | QH_LINK_T)) | QH_LINK_PTR(target);
else
*ptr = QH_LINK_T;
}
/**
* struct di_buf_entry - Device Information (DI) buffer entry.
*
* There's one of these per connected device.
*/
struct di_buf_entry {
__le32 availability_info[8]; /*< MAS availability information, one MAS per bit */
__le32 addr_sec_info; /*< addressing and security info */
__le32 reserved[7];
} __attribute__((packed));
#define WHC_DI_SECURE (1 << 31)
#define WHC_DI_DISABLE (1 << 30)
#define WHC_DI_KEY_IDX(k) ((k) << 8)
#define WHC_DI_KEY_IDX_MASK 0x0000ff00
#define WHC_DI_DEV_ADDR(a) ((a) << 0)
#define WHC_DI_DEV_ADDR_MASK 0x000000ff
/**
* struct dn_buf_entry - Device Notification (DN) buffer entry.
*
* [WHCI] section 3.2.8
*/
struct dn_buf_entry {
__u8 msg_size; /*< number of octets of valid DN data */
__u8 reserved1;
__u8 src_addr; /*< source address */
__u8 status; /*< buffer entry status */
__le32 tkid; /*< TKID for source device, valid if secure bit is set */
__u8 dn_data[56]; /*< up to 56 octets of DN data */
} __attribute__((packed));
#define WHC_DN_STATUS_VALID (1 << 7) /* buffer entry is valid */
#define WHC_DN_STATUS_SECURE (1 << 6) /* notification received using secure frame */
#define WHC_N_DN_ENTRIES (4096 / sizeof(struct dn_buf_entry))
/* The Add MMC IE WUSB Generic Command may take up to 256 bytes of
data. [WHCI] section 2.4.7. */
#define WHC_GEN_CMD_DATA_LEN 256
/*
* HC registers.
*
* [WHCI] section 2.4
*/
#define WHCIVERSION 0x00
#define WHCSPARAMS 0x04
# define WHCSPARAMS_TO_N_MMC_IES(p) (((p) >> 16) & 0xff)
# define WHCSPARAMS_TO_N_KEYS(p) (((p) >> 8) & 0xff)
# define WHCSPARAMS_TO_N_DEVICES(p) (((p) >> 0) & 0x7f)
#define WUSBCMD 0x08
# define WUSBCMD_BCID(b) ((b) << 16)
# define WUSBCMD_BCID_MASK (0xff << 16)
# define WUSBCMD_ASYNC_QSET_RM (1 << 12)
# define WUSBCMD_PERIODIC_QSET_RM (1 << 11)
# define WUSBCMD_WUSBSI(s) ((s) << 8)
# define WUSBCMD_WUSBSI_MASK (0x7 << 8)
# define WUSBCMD_ASYNC_SYNCED_DB (1 << 7)
# define WUSBCMD_PERIODIC_SYNCED_DB (1 << 6)
# define WUSBCMD_ASYNC_UPDATED (1 << 5)
# define WUSBCMD_PERIODIC_UPDATED (1 << 4)
# define WUSBCMD_ASYNC_EN (1 << 3)
# define WUSBCMD_PERIODIC_EN (1 << 2)
# define WUSBCMD_WHCRESET (1 << 1)
# define WUSBCMD_RUN (1 << 0)
#define WUSBSTS 0x0c
# define WUSBSTS_ASYNC_SCHED (1 << 15)
# define WUSBSTS_PERIODIC_SCHED (1 << 14)
# define WUSBSTS_DNTS_SCHED (1 << 13)
# define WUSBSTS_HCHALTED (1 << 12)
# define WUSBSTS_GEN_CMD_DONE (1 << 9)
# define WUSBSTS_CHAN_TIME_ROLLOVER (1 << 8)
# define WUSBSTS_DNTS_OVERFLOW (1 << 7)
# define WUSBSTS_BPST_ADJUSTMENT_CHANGED (1 << 6)
# define WUSBSTS_HOST_ERR (1 << 5)
# define WUSBSTS_ASYNC_SCHED_SYNCED (1 << 4)
# define WUSBSTS_PERIODIC_SCHED_SYNCED (1 << 3)
# define WUSBSTS_DNTS_INT (1 << 2)
# define WUSBSTS_ERR_INT (1 << 1)
# define WUSBSTS_INT (1 << 0)
# define WUSBSTS_INT_MASK 0x3ff
#define WUSBINTR 0x10
# define WUSBINTR_GEN_CMD_DONE (1 << 9)
# define WUSBINTR_CHAN_TIME_ROLLOVER (1 << 8)
# define WUSBINTR_DNTS_OVERFLOW (1 << 7)
# define WUSBINTR_BPST_ADJUSTMENT_CHANGED (1 << 6)
# define WUSBINTR_HOST_ERR (1 << 5)
# define WUSBINTR_ASYNC_SCHED_SYNCED (1 << 4)
# define WUSBINTR_PERIODIC_SCHED_SYNCED (1 << 3)
# define WUSBINTR_DNTS_INT (1 << 2)
# define WUSBINTR_ERR_INT (1 << 1)
# define WUSBINTR_INT (1 << 0)
# define WUSBINTR_ALL 0x3ff
#define WUSBGENCMDSTS 0x14
# define WUSBGENCMDSTS_ACTIVE (1 << 31)
# define WUSBGENCMDSTS_ERROR (1 << 24)
# define WUSBGENCMDSTS_IOC (1 << 23)
# define WUSBGENCMDSTS_MMCIE_ADD 0x01
# define WUSBGENCMDSTS_MMCIE_RM 0x02
# define WUSBGENCMDSTS_SET_MAS 0x03
# define WUSBGENCMDSTS_CHAN_STOP 0x04
# define WUSBGENCMDSTS_RWP_EN 0x05
#define WUSBGENCMDPARAMS 0x18
#define WUSBGENADDR 0x20
#define WUSBASYNCLISTADDR 0x28
#define WUSBDNTSBUFADDR 0x30
#define WUSBDEVICEINFOADDR 0x38
#define WUSBSETSECKEYCMD 0x40
# define WUSBSETSECKEYCMD_SET (1 << 31)
# define WUSBSETSECKEYCMD_ERASE (1 << 30)
# define WUSBSETSECKEYCMD_GTK (1 << 8)
# define WUSBSETSECKEYCMD_IDX(i) ((i) << 0)
#define WUSBTKID 0x44
#define WUSBSECKEY 0x48
#define WUSBPERIODICLISTBASE 0x58
#define WUSBMASINDEX 0x60
#define WUSBDNTSCTRL 0x64
# define WUSBDNTSCTRL_ACTIVE (1 << 31)
# define WUSBDNTSCTRL_INTERVAL(i) ((i) << 8)
# define WUSBDNTSCTRL_SLOTS(s) ((s) << 0)
#define WUSBTIME 0x68
# define WUSBTIME_CHANNEL_TIME_MASK 0x00ffffff
#define WUSBBPST 0x6c
#define WUSBDIBUPDATED 0x70
#endif /* #ifndef _WHCI_WHCI_HC_H */