License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2009-06-03 05:37:05 +08:00
|
|
|
/*
|
|
|
|
* builtin-report.c
|
|
|
|
*
|
|
|
|
* Builtin report command: Analyze the perf.data input file,
|
|
|
|
* look up and read DSOs and symbol information and display
|
|
|
|
* a histogram of results, along various sorting keys.
|
|
|
|
*/
|
2009-05-27 15:10:38 +08:00
|
|
|
#include "builtin.h"
|
2009-05-26 15:17:18 +08:00
|
|
|
|
2009-06-03 05:37:05 +08:00
|
|
|
#include "util/util.h"
|
2016-06-23 16:55:17 +08:00
|
|
|
#include "util/config.h"
|
2009-06-03 05:37:05 +08:00
|
|
|
|
2011-02-04 19:45:46 +08:00
|
|
|
#include "util/annotate.h"
|
2009-06-04 21:19:47 +08:00
|
|
|
#include "util/color.h"
|
2009-07-02 01:46:08 +08:00
|
|
|
#include <linux/list.h>
|
2009-07-01 23:28:37 +08:00
|
|
|
#include <linux/rbtree.h>
|
2018-01-08 00:03:56 +08:00
|
|
|
#include <linux/err.h>
|
2009-05-29 01:55:04 +08:00
|
|
|
#include "util/symbol.h"
|
2009-06-26 22:28:01 +08:00
|
|
|
#include "util/callchain.h"
|
2009-08-07 19:55:24 +08:00
|
|
|
#include "util/values.h"
|
2009-05-18 23:45:42 +08:00
|
|
|
|
2009-05-26 15:17:18 +08:00
|
|
|
#include "perf.h"
|
2009-08-17 04:05:48 +08:00
|
|
|
#include "util/debug.h"
|
2011-03-06 08:40:06 +08:00
|
|
|
#include "util/evlist.h"
|
|
|
|
#include "util/evsel.h"
|
2009-06-25 23:05:54 +08:00
|
|
|
#include "util/header.h"
|
2009-12-12 07:24:02 +08:00
|
|
|
#include "util/session.h"
|
2011-11-28 18:30:20 +08:00
|
|
|
#include "util/tool.h"
|
2009-05-26 15:17:18 +08:00
|
|
|
|
2015-12-15 23:39:39 +08:00
|
|
|
#include <subcmd/parse-options.h>
|
2016-01-09 18:16:29 +08:00
|
|
|
#include <subcmd/exec-cmd.h>
|
2009-05-26 15:17:18 +08:00
|
|
|
#include "util/parse-events.h"
|
|
|
|
|
2009-08-14 18:21:53 +08:00
|
|
|
#include "util/thread.h"
|
2009-09-25 00:02:49 +08:00
|
|
|
#include "util/sort.h"
|
2009-09-28 21:32:55 +08:00
|
|
|
#include "util/hist.h"
|
2013-10-15 22:27:32 +08:00
|
|
|
#include "util/data.h"
|
2012-10-16 07:33:38 +08:00
|
|
|
#include "arch/common.h"
|
perf report: Add option to specify time window of interest
Add option to allow user to control analysis window. e.g., collect data
for time window and analyze a segment of interest within that window.
Committer notes:
Testing it:
Using the perf.data file captured via 'perf kmem record':
# perf report --header-only
# ========
# captured on: Tue Nov 29 16:01:53 2016
# hostname : jouet
# os release : 4.8.8-300.fc25.x86_64
# perf version : 4.9.rc6.g5a6aca
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz
# cpuid : GenuineIntel,6,61,4
# total memory : 20254660 kB
# cmdline : /home/acme/bin/perf kmem record usleep 1
# event : name = kmem:kmalloc, , id = { 931980, 931981, 931982, 931983 }, type = 2, size = 112, config = 0x1b9, { sample_period, sample_freq } = 1, sample_typ
# event : name = kmem:kmalloc_node, , id = { 931984, 931985, 931986, 931987 }, type = 2, size = 112, config = 0x1b7, { sample_period, sample_freq } = 1, sampl
# event : name = kmem:kfree, , id = { 931988, 931989, 931990, 931991 }, type = 2, size = 112, config = 0x1b5, { sample_period, sample_freq } = 1, sample_type
# event : name = kmem:kmem_cache_alloc, , id = { 931992, 931993, 931994, 931995 }, type = 2, size = 112, config = 0x1b8, { sample_period, sample_freq } = 1, s
# event : name = kmem:kmem_cache_alloc_node, , id = { 931996, 931997, 931998, 931999 }, type = 2, size = 112, config = 0x1b6, { sample_period, sample_freq } =
# event : name = kmem:kmem_cache_free, , id = { 932000, 932001, 932002, 932003 }, type = 2, size = 112, config = 0x1b4, { sample_period, sample_freq } = 1, sa
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# pmu mappings: cpu = 4, intel_pt = 7, intel_bts = 6, uncore_arb = 13, cstate_pkg = 15, breakpoint = 5, uncore_cbox_1 = 12, power = 9, software = 1, uncore_im
# HEADER_CACHE info available, use -I to display
# missing features: HEADER_BRANCH_STACK HEADER_GROUP_DESC HEADER_AUXTRACE HEADER_STAT
# ========
#
# # Looking at just the histogram entries for the first event:
#
# perf report | head -33
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 40 of event 'kmem:kmalloc'
# Event count (approx.): 40
#
# Overhead Trace output
# ........ ...............................................................................................................
#
37.50% call_site=ffffffffb91ad3c7 ptr=0xffff88895fc05000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL
10.00% call_site=ffffffffb9258416 ptr=0xffff888a1dc61f00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO
7.50% call_site=ffffffffb9258416 ptr=0xffff888a2640ac00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO
2.50% call_site=ffffffffb92759ba ptr=0xffff888a26776000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb9276864 ptr=0xffff8886f6b82600 bytes_req=136 bytes_alloc=192 gfp_flags=GFP_KERNEL|__GFP_ZERO
2.50% call_site=ffffffffb9276903 ptr=0xffff888aefcf0460 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c98a00 bytes_req=392 bytes_alloc=512 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c9ba00 bytes_req=504 bytes_alloc=512 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad301 ptr=0xffff888a31747600 bytes_req=128 bytes_alloc=128 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad511 ptr=0xffff888a9d26a2a0 bytes_req=28 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c11a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c12c0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1540 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c16e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1c20 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff888a9d26a2a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931240 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931980 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931a00 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
#
# # And then limiting using the example for 'perf kmem stat --time' used
# # in the previous changeset committer note we see that there were no
# # kmem:kmalloc in that last part of the file, but there were some
# # kmem:kmem_cache_alloc ones:
#
# perf report --time 20119.782088, --stdio
#
# Total Lost Samples: 0
#
# Samples: 0 of event 'kmem:kmalloc'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
# Samples: 0 of event 'kmem:kmalloc_node'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
# Samples: 0 of event 'kmem:kfree'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
# Samples: 8 of event 'kmem:kmem_cache_alloc'
# Event count (approx.): 8
#
# Overhead Trace output
# ........ ..................................................................................................................
#
75.00% call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO
12.50% call_site=ffffffffb90ad33a ptr=0xffff8889f071f6e0 bytes_req=160 bytes_alloc=160 gfp_flags=GFP_ATOMIC|__GFP_NOTRACK
12.50% call_site=ffffffffb9287cc1 ptr=0xffff8889b12722d8 bytes_req=104 bytes_alloc=104 gfp_flags=GFP_NOFS|__GFP_ZERO
#
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-7-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:46 +08:00
|
|
|
#include "util/time-utils.h"
|
2015-04-25 03:29:45 +08:00
|
|
|
#include "util/auxtrace.h"
|
2017-04-20 03:05:56 +08:00
|
|
|
#include "util/units.h"
|
2017-07-18 20:13:14 +08:00
|
|
|
#include "util/branch.h"
|
2015-04-25 03:29:45 +08:00
|
|
|
|
2013-09-13 14:27:43 +08:00
|
|
|
#include <dlfcn.h>
|
2017-04-18 21:46:11 +08:00
|
|
|
#include <errno.h>
|
2017-04-18 02:23:08 +08:00
|
|
|
#include <inttypes.h>
|
2017-04-18 23:33:30 +08:00
|
|
|
#include <regex.h>
|
2017-04-20 02:49:18 +08:00
|
|
|
#include <signal.h>
|
2011-07-04 19:57:50 +08:00
|
|
|
#include <linux/bitmap.h>
|
2016-03-24 02:16:55 +08:00
|
|
|
#include <linux/stringify.h>
|
2017-04-20 07:57:47 +08:00
|
|
|
#include <sys/types.h>
|
|
|
|
#include <sys/stat.h>
|
|
|
|
#include <unistd.h>
|
2018-01-10 02:25:03 +08:00
|
|
|
#include <linux/mman.h>
|
2011-07-04 19:57:50 +08:00
|
|
|
|
2013-12-20 01:53:53 +08:00
|
|
|
struct report {
|
2011-11-28 18:30:20 +08:00
|
|
|
struct perf_tool tool;
|
2011-11-25 18:19:45 +08:00
|
|
|
struct perf_session *session;
|
2015-11-13 03:50:13 +08:00
|
|
|
bool use_tui, use_gtk, use_stdio;
|
2011-11-17 22:19:04 +08:00
|
|
|
bool show_full_info;
|
|
|
|
bool show_threads;
|
|
|
|
bool inverted_callchain;
|
2013-01-24 23:10:36 +08:00
|
|
|
bool mem_mode;
|
2018-01-08 00:03:55 +08:00
|
|
|
bool stats_mode;
|
2018-01-08 00:03:56 +08:00
|
|
|
bool tasks_mode;
|
2018-01-10 02:25:03 +08:00
|
|
|
bool mmaps_mode;
|
2013-12-09 18:02:49 +08:00
|
|
|
bool header;
|
|
|
|
bool header_only;
|
2015-07-18 23:24:47 +08:00
|
|
|
bool nonany_branch_mode;
|
perf report: Add --max-stack option to limit callchain stack scan
When callgraph data was included in the perf data file, it may take a
long time to scan all those data and merge them together especially if
the stored callchains are long and the perf data file itself is large,
like a Gbyte or so.
The callchain stack is currently limited to PERF_MAX_STACK_DEPTH (127).
This is a large value. Usually the callgraph data that developers are
most interested in are the first few levels, the rests are usually not
looked at.
This patch adds a new --max-stack option to perf-report to limit the
depth of callchain stack data to look at to reduce the time it takes for
perf-report to finish its processing. It trades the presence of trailing
stack information with faster speed.
The following table shows the elapsed time of doing perf-report on a
perf.data file of size 985,531,828 bytes.
--max_stack Elapsed Time Output data size
----------- ------------ ----------------
not set 88.0s 124,422,651
64 87.5s 116,303,213
32 87.2s 112,023,804
16 86.6s 94,326,380
8 59.9s 33,697,248
4 40.7s 10,116,637
-g none 27.1s 2,555,810
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1382107129-2010-4-git-send-email-Waiman.Long@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-18 22:38:48 +08:00
|
|
|
int max_stack;
|
2011-11-17 22:19:04 +08:00
|
|
|
struct perf_read_values show_threads_values;
|
|
|
|
const char *pretty_printing_style;
|
|
|
|
const char *cpu_list;
|
2012-03-16 16:50:54 +08:00
|
|
|
const char *symbol_filter_str;
|
perf report: Add option to specify time window of interest
Add option to allow user to control analysis window. e.g., collect data
for time window and analyze a segment of interest within that window.
Committer notes:
Testing it:
Using the perf.data file captured via 'perf kmem record':
# perf report --header-only
# ========
# captured on: Tue Nov 29 16:01:53 2016
# hostname : jouet
# os release : 4.8.8-300.fc25.x86_64
# perf version : 4.9.rc6.g5a6aca
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz
# cpuid : GenuineIntel,6,61,4
# total memory : 20254660 kB
# cmdline : /home/acme/bin/perf kmem record usleep 1
# event : name = kmem:kmalloc, , id = { 931980, 931981, 931982, 931983 }, type = 2, size = 112, config = 0x1b9, { sample_period, sample_freq } = 1, sample_typ
# event : name = kmem:kmalloc_node, , id = { 931984, 931985, 931986, 931987 }, type = 2, size = 112, config = 0x1b7, { sample_period, sample_freq } = 1, sampl
# event : name = kmem:kfree, , id = { 931988, 931989, 931990, 931991 }, type = 2, size = 112, config = 0x1b5, { sample_period, sample_freq } = 1, sample_type
# event : name = kmem:kmem_cache_alloc, , id = { 931992, 931993, 931994, 931995 }, type = 2, size = 112, config = 0x1b8, { sample_period, sample_freq } = 1, s
# event : name = kmem:kmem_cache_alloc_node, , id = { 931996, 931997, 931998, 931999 }, type = 2, size = 112, config = 0x1b6, { sample_period, sample_freq } =
# event : name = kmem:kmem_cache_free, , id = { 932000, 932001, 932002, 932003 }, type = 2, size = 112, config = 0x1b4, { sample_period, sample_freq } = 1, sa
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# pmu mappings: cpu = 4, intel_pt = 7, intel_bts = 6, uncore_arb = 13, cstate_pkg = 15, breakpoint = 5, uncore_cbox_1 = 12, power = 9, software = 1, uncore_im
# HEADER_CACHE info available, use -I to display
# missing features: HEADER_BRANCH_STACK HEADER_GROUP_DESC HEADER_AUXTRACE HEADER_STAT
# ========
#
# # Looking at just the histogram entries for the first event:
#
# perf report | head -33
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 40 of event 'kmem:kmalloc'
# Event count (approx.): 40
#
# Overhead Trace output
# ........ ...............................................................................................................
#
37.50% call_site=ffffffffb91ad3c7 ptr=0xffff88895fc05000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL
10.00% call_site=ffffffffb9258416 ptr=0xffff888a1dc61f00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO
7.50% call_site=ffffffffb9258416 ptr=0xffff888a2640ac00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO
2.50% call_site=ffffffffb92759ba ptr=0xffff888a26776000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb9276864 ptr=0xffff8886f6b82600 bytes_req=136 bytes_alloc=192 gfp_flags=GFP_KERNEL|__GFP_ZERO
2.50% call_site=ffffffffb9276903 ptr=0xffff888aefcf0460 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c98a00 bytes_req=392 bytes_alloc=512 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c9ba00 bytes_req=504 bytes_alloc=512 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad301 ptr=0xffff888a31747600 bytes_req=128 bytes_alloc=128 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad511 ptr=0xffff888a9d26a2a0 bytes_req=28 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c11a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c12c0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1540 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c16e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1c20 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff888a9d26a2a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931240 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931980 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931a00 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
#
# # And then limiting using the example for 'perf kmem stat --time' used
# # in the previous changeset committer note we see that there were no
# # kmem:kmalloc in that last part of the file, but there were some
# # kmem:kmem_cache_alloc ones:
#
# perf report --time 20119.782088, --stdio
#
# Total Lost Samples: 0
#
# Samples: 0 of event 'kmem:kmalloc'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
# Samples: 0 of event 'kmem:kmalloc_node'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
# Samples: 0 of event 'kmem:kfree'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
# Samples: 8 of event 'kmem:kmem_cache_alloc'
# Event count (approx.): 8
#
# Overhead Trace output
# ........ ..................................................................................................................
#
75.00% call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO
12.50% call_site=ffffffffb90ad33a ptr=0xffff8889f071f6e0 bytes_req=160 bytes_alloc=160 gfp_flags=GFP_ATOMIC|__GFP_NOTRACK
12.50% call_site=ffffffffb9287cc1 ptr=0xffff8889b12722d8 bytes_req=104 bytes_alloc=104 gfp_flags=GFP_NOFS|__GFP_ZERO
#
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-7-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:46 +08:00
|
|
|
const char *time_str;
|
perf report: Remove the time slices number limitation
Previously it was only allowed to use at most 10 time slices in 'perf
report --time'.
This patch removes this limitation.
For example, following command line is OK (12 time slices)
perf report --stdio --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-8-git-send-email-yao.jin@linux.intel.com
[ No need to check for NULL to call free, use zfree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-10 23:00:32 +08:00
|
|
|
struct perf_time_interval *ptime_range;
|
|
|
|
int range_size;
|
2017-12-08 21:13:45 +08:00
|
|
|
int range_num;
|
2013-05-14 10:09:04 +08:00
|
|
|
float min_percent;
|
2014-04-22 08:47:25 +08:00
|
|
|
u64 nr_entries;
|
2014-06-05 17:00:20 +08:00
|
|
|
u64 queue_size;
|
2015-09-04 22:45:44 +08:00
|
|
|
int socket_filter;
|
2011-11-17 22:19:04 +08:00
|
|
|
DECLARE_BITMAP(cpu_bitmap, MAX_NR_CPUS);
|
2017-07-18 20:13:14 +08:00
|
|
|
struct branch_type_stat brtype_stat;
|
2011-11-25 18:19:45 +08:00
|
|
|
};
|
2011-07-04 19:57:50 +08:00
|
|
|
|
2013-12-20 01:53:53 +08:00
|
|
|
static int report__config(const char *var, const char *value, void *cb)
|
2013-01-22 17:09:46 +08:00
|
|
|
{
|
2014-06-05 17:00:20 +08:00
|
|
|
struct report *rep = cb;
|
|
|
|
|
2013-01-22 17:09:46 +08:00
|
|
|
if (!strcmp(var, "report.group")) {
|
|
|
|
symbol_conf.event_group = perf_config_bool(var, value);
|
|
|
|
return 0;
|
|
|
|
}
|
2013-05-14 10:09:06 +08:00
|
|
|
if (!strcmp(var, "report.percent-limit")) {
|
2016-01-27 23:40:50 +08:00
|
|
|
double pcnt = strtof(value, NULL);
|
|
|
|
|
|
|
|
rep->min_percent = pcnt;
|
|
|
|
callchain_param.min_percent = pcnt;
|
2013-05-14 10:09:06 +08:00
|
|
|
return 0;
|
|
|
|
}
|
2013-01-22 17:09:46 +08:00
|
|
|
if (!strcmp(var, "report.children")) {
|
|
|
|
symbol_conf.cumulate_callchain = perf_config_bool(var, value);
|
|
|
|
return 0;
|
|
|
|
}
|
2017-06-27 22:44:58 +08:00
|
|
|
if (!strcmp(var, "report.queue-size"))
|
|
|
|
return perf_config_u64(&rep->queue_size, var, value);
|
|
|
|
|
2016-08-13 07:41:01 +08:00
|
|
|
if (!strcmp(var, "report.sort_order")) {
|
|
|
|
default_sort_order = strdup(value);
|
|
|
|
return 0;
|
|
|
|
}
|
2013-01-22 17:09:46 +08:00
|
|
|
|
2016-02-26 17:31:51 +08:00
|
|
|
return 0;
|
2013-01-22 17:09:46 +08:00
|
|
|
}
|
|
|
|
|
2014-01-07 16:02:25 +08:00
|
|
|
static int hist_iter__report_callback(struct hist_entry_iter *iter,
|
|
|
|
struct addr_location *al, bool single,
|
|
|
|
void *arg)
|
|
|
|
{
|
|
|
|
int err = 0;
|
|
|
|
struct report *rep = arg;
|
|
|
|
struct hist_entry *he = iter->he;
|
|
|
|
struct perf_evsel *evsel = iter->evsel;
|
2017-07-21 03:28:53 +08:00
|
|
|
struct perf_sample *sample = iter->sample;
|
2014-01-07 16:02:25 +08:00
|
|
|
struct mem_info *mi;
|
|
|
|
struct branch_info *bi;
|
|
|
|
|
|
|
|
if (!ui__has_annotation())
|
|
|
|
return 0;
|
|
|
|
|
2017-07-21 03:28:53 +08:00
|
|
|
hist__account_cycles(sample->branch_stack, al, sample,
|
2015-07-18 23:24:49 +08:00
|
|
|
rep->nonany_branch_mode);
|
|
|
|
|
2014-01-07 16:02:25 +08:00
|
|
|
if (sort__mode == SORT_MODE__BRANCH) {
|
|
|
|
bi = he->branch_info;
|
2017-07-21 03:28:53 +08:00
|
|
|
err = addr_map_symbol__inc_samples(&bi->from, sample, evsel->idx);
|
2014-01-07 16:02:25 +08:00
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
|
2017-07-21 03:28:53 +08:00
|
|
|
err = addr_map_symbol__inc_samples(&bi->to, sample, evsel->idx);
|
2014-01-07 16:02:25 +08:00
|
|
|
|
|
|
|
} else if (rep->mem_mode) {
|
|
|
|
mi = he->mem_info;
|
2017-07-21 03:28:53 +08:00
|
|
|
err = addr_map_symbol__inc_samples(&mi->daddr, sample, evsel->idx);
|
2014-01-07 16:02:25 +08:00
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
|
2017-07-21 03:28:53 +08:00
|
|
|
err = hist_entry__inc_addr_samples(he, sample, evsel->idx, al->addr);
|
2014-01-07 16:02:25 +08:00
|
|
|
|
|
|
|
} else if (symbol_conf.cumulate_callchain) {
|
|
|
|
if (single)
|
2017-07-21 03:28:53 +08:00
|
|
|
err = hist_entry__inc_addr_samples(he, sample, evsel->idx,
|
2014-01-07 16:02:25 +08:00
|
|
|
al->addr);
|
|
|
|
} else {
|
2017-07-21 03:28:53 +08:00
|
|
|
err = hist_entry__inc_addr_samples(he, sample, evsel->idx, al->addr);
|
2014-01-07 16:02:25 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
|
|
|
return err;
|
2013-01-24 23:10:36 +08:00
|
|
|
}
|
|
|
|
|
2017-07-18 20:13:14 +08:00
|
|
|
static int hist_iter__branch_callback(struct hist_entry_iter *iter,
|
|
|
|
struct addr_location *al __maybe_unused,
|
|
|
|
bool single __maybe_unused,
|
|
|
|
void *arg)
|
|
|
|
{
|
|
|
|
struct hist_entry *he = iter->he;
|
|
|
|
struct report *rep = arg;
|
|
|
|
struct branch_info *bi;
|
2017-12-26 18:42:43 +08:00
|
|
|
struct perf_sample *sample = iter->sample;
|
|
|
|
struct perf_evsel *evsel = iter->evsel;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if (!ui__has_annotation())
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
hist__account_cycles(sample->branch_stack, al, sample,
|
|
|
|
rep->nonany_branch_mode);
|
2017-07-18 20:13:14 +08:00
|
|
|
|
|
|
|
bi = he->branch_info;
|
2017-12-26 18:42:43 +08:00
|
|
|
err = addr_map_symbol__inc_samples(&bi->from, sample, evsel->idx);
|
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
err = addr_map_symbol__inc_samples(&bi->to, sample, evsel->idx);
|
|
|
|
|
2017-07-18 20:13:14 +08:00
|
|
|
branch_type_count(&rep->brtype_stat, &bi->flags,
|
|
|
|
bi->from.addr, bi->to.addr);
|
|
|
|
|
2017-12-26 18:42:43 +08:00
|
|
|
out:
|
|
|
|
return err;
|
2017-07-18 20:13:14 +08:00
|
|
|
}
|
|
|
|
|
2011-11-28 18:30:20 +08:00
|
|
|
static int process_sample_event(struct perf_tool *tool,
|
2011-11-25 18:19:45 +08:00
|
|
|
union perf_event *event,
|
2011-01-30 00:01:45 +08:00
|
|
|
struct perf_sample *sample,
|
2011-03-16 02:44:01 +08:00
|
|
|
struct perf_evsel *evsel,
|
2011-11-28 17:56:39 +08:00
|
|
|
struct machine *machine)
|
2009-06-04 05:14:49 +08:00
|
|
|
{
|
2013-12-20 01:53:53 +08:00
|
|
|
struct report *rep = container_of(tool, struct report, tool);
|
perf tools: Consolidate symbol resolving across all tools
Now we have a very high level routine for simple tools to
process IP sample events:
int event__preprocess_sample(const event_t *self,
struct addr_location *al,
symbol_filter_t filter)
It receives the event itself and will insert new threads in the
global threads list and resolve the map and symbol, filling all
this info into the new addr_location struct, so that tools like
annotate and report can further process the event by creating
hist_entries in their specific way (with or without callgraphs,
etc).
It in turn uses the new next layer function:
void thread__find_addr_location(struct thread *self, u8 cpumode,
enum map_type type, u64 addr,
struct addr_location *al,
symbol_filter_t filter)
This one will, given a thread (userspace or the kernel kthread
one), will find the given type (MAP__FUNCTION now, MAP__VARIABLE
too in the near future) at the given cpumode, taking vdsos into
account (userspace hit, but kernel symbol) and will fill all
these details in the addr_location given.
Tools that need a more compact API for plain function
resolution, like 'kmem', can use this other one:
struct symbol *thread__find_function(struct thread *self, u64 addr,
symbol_filter_t filter)
So, to resolve a kernel symbol, that is all the 'kmem' tool
needs, its just a matter of calling:
sym = thread__find_function(kthread, addr, NULL);
The 'filter' parameter is needed because we do lazy
parsing/loading of ELF symtabs or /proc/kallsyms.
With this we remove more code duplication all around, which is
always good, huh? :-)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-12-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-28 02:29:23 +08:00
|
|
|
struct addr_location al;
|
2013-10-30 08:40:34 +08:00
|
|
|
struct hist_entry_iter iter = {
|
2015-05-19 16:04:10 +08:00
|
|
|
.evsel = evsel,
|
|
|
|
.sample = sample,
|
2015-11-26 15:08:20 +08:00
|
|
|
.hide_unresolved = symbol_conf.hide_unresolved,
|
2015-05-19 16:04:10 +08:00
|
|
|
.add_entry_cb = hist_iter__report_callback,
|
2013-10-30 08:40:34 +08:00
|
|
|
};
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
|
|
|
int ret = 0;
|
2009-12-06 19:08:24 +08:00
|
|
|
|
2017-12-08 21:13:45 +08:00
|
|
|
if (perf_time__ranges_skip_sample(rep->ptime_range, rep->range_num,
|
|
|
|
sample->time)) {
|
perf report: Add option to specify time window of interest
Add option to allow user to control analysis window. e.g., collect data
for time window and analyze a segment of interest within that window.
Committer notes:
Testing it:
Using the perf.data file captured via 'perf kmem record':
# perf report --header-only
# ========
# captured on: Tue Nov 29 16:01:53 2016
# hostname : jouet
# os release : 4.8.8-300.fc25.x86_64
# perf version : 4.9.rc6.g5a6aca
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz
# cpuid : GenuineIntel,6,61,4
# total memory : 20254660 kB
# cmdline : /home/acme/bin/perf kmem record usleep 1
# event : name = kmem:kmalloc, , id = { 931980, 931981, 931982, 931983 }, type = 2, size = 112, config = 0x1b9, { sample_period, sample_freq } = 1, sample_typ
# event : name = kmem:kmalloc_node, , id = { 931984, 931985, 931986, 931987 }, type = 2, size = 112, config = 0x1b7, { sample_period, sample_freq } = 1, sampl
# event : name = kmem:kfree, , id = { 931988, 931989, 931990, 931991 }, type = 2, size = 112, config = 0x1b5, { sample_period, sample_freq } = 1, sample_type
# event : name = kmem:kmem_cache_alloc, , id = { 931992, 931993, 931994, 931995 }, type = 2, size = 112, config = 0x1b8, { sample_period, sample_freq } = 1, s
# event : name = kmem:kmem_cache_alloc_node, , id = { 931996, 931997, 931998, 931999 }, type = 2, size = 112, config = 0x1b6, { sample_period, sample_freq } =
# event : name = kmem:kmem_cache_free, , id = { 932000, 932001, 932002, 932003 }, type = 2, size = 112, config = 0x1b4, { sample_period, sample_freq } = 1, sa
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# pmu mappings: cpu = 4, intel_pt = 7, intel_bts = 6, uncore_arb = 13, cstate_pkg = 15, breakpoint = 5, uncore_cbox_1 = 12, power = 9, software = 1, uncore_im
# HEADER_CACHE info available, use -I to display
# missing features: HEADER_BRANCH_STACK HEADER_GROUP_DESC HEADER_AUXTRACE HEADER_STAT
# ========
#
# # Looking at just the histogram entries for the first event:
#
# perf report | head -33
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 40 of event 'kmem:kmalloc'
# Event count (approx.): 40
#
# Overhead Trace output
# ........ ...............................................................................................................
#
37.50% call_site=ffffffffb91ad3c7 ptr=0xffff88895fc05000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL
10.00% call_site=ffffffffb9258416 ptr=0xffff888a1dc61f00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO
7.50% call_site=ffffffffb9258416 ptr=0xffff888a2640ac00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO
2.50% call_site=ffffffffb92759ba ptr=0xffff888a26776000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb9276864 ptr=0xffff8886f6b82600 bytes_req=136 bytes_alloc=192 gfp_flags=GFP_KERNEL|__GFP_ZERO
2.50% call_site=ffffffffb9276903 ptr=0xffff888aefcf0460 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c98a00 bytes_req=392 bytes_alloc=512 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c9ba00 bytes_req=504 bytes_alloc=512 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad301 ptr=0xffff888a31747600 bytes_req=128 bytes_alloc=128 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad511 ptr=0xffff888a9d26a2a0 bytes_req=28 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c11a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c12c0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1540 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c16e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1c20 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff888a9d26a2a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931240 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931980 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931a00 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
#
# # And then limiting using the example for 'perf kmem stat --time' used
# # in the previous changeset committer note we see that there were no
# # kmem:kmalloc in that last part of the file, but there were some
# # kmem:kmem_cache_alloc ones:
#
# perf report --time 20119.782088, --stdio
#
# Total Lost Samples: 0
#
# Samples: 0 of event 'kmem:kmalloc'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
# Samples: 0 of event 'kmem:kmalloc_node'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
# Samples: 0 of event 'kmem:kfree'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
# Samples: 8 of event 'kmem:kmem_cache_alloc'
# Event count (approx.): 8
#
# Overhead Trace output
# ........ ..................................................................................................................
#
75.00% call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO
12.50% call_site=ffffffffb90ad33a ptr=0xffff8889f071f6e0 bytes_req=160 bytes_alloc=160 gfp_flags=GFP_ATOMIC|__GFP_NOTRACK
12.50% call_site=ffffffffb9287cc1 ptr=0xffff8889b12722d8 bytes_req=104 bytes_alloc=104 gfp_flags=GFP_NOFS|__GFP_ZERO
#
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-7-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:46 +08:00
|
|
|
return 0;
|
2017-12-08 21:13:45 +08:00
|
|
|
}
|
perf report: Add option to specify time window of interest
Add option to allow user to control analysis window. e.g., collect data
for time window and analyze a segment of interest within that window.
Committer notes:
Testing it:
Using the perf.data file captured via 'perf kmem record':
# perf report --header-only
# ========
# captured on: Tue Nov 29 16:01:53 2016
# hostname : jouet
# os release : 4.8.8-300.fc25.x86_64
# perf version : 4.9.rc6.g5a6aca
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz
# cpuid : GenuineIntel,6,61,4
# total memory : 20254660 kB
# cmdline : /home/acme/bin/perf kmem record usleep 1
# event : name = kmem:kmalloc, , id = { 931980, 931981, 931982, 931983 }, type = 2, size = 112, config = 0x1b9, { sample_period, sample_freq } = 1, sample_typ
# event : name = kmem:kmalloc_node, , id = { 931984, 931985, 931986, 931987 }, type = 2, size = 112, config = 0x1b7, { sample_period, sample_freq } = 1, sampl
# event : name = kmem:kfree, , id = { 931988, 931989, 931990, 931991 }, type = 2, size = 112, config = 0x1b5, { sample_period, sample_freq } = 1, sample_type
# event : name = kmem:kmem_cache_alloc, , id = { 931992, 931993, 931994, 931995 }, type = 2, size = 112, config = 0x1b8, { sample_period, sample_freq } = 1, s
# event : name = kmem:kmem_cache_alloc_node, , id = { 931996, 931997, 931998, 931999 }, type = 2, size = 112, config = 0x1b6, { sample_period, sample_freq } =
# event : name = kmem:kmem_cache_free, , id = { 932000, 932001, 932002, 932003 }, type = 2, size = 112, config = 0x1b4, { sample_period, sample_freq } = 1, sa
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# pmu mappings: cpu = 4, intel_pt = 7, intel_bts = 6, uncore_arb = 13, cstate_pkg = 15, breakpoint = 5, uncore_cbox_1 = 12, power = 9, software = 1, uncore_im
# HEADER_CACHE info available, use -I to display
# missing features: HEADER_BRANCH_STACK HEADER_GROUP_DESC HEADER_AUXTRACE HEADER_STAT
# ========
#
# # Looking at just the histogram entries for the first event:
#
# perf report | head -33
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 40 of event 'kmem:kmalloc'
# Event count (approx.): 40
#
# Overhead Trace output
# ........ ...............................................................................................................
#
37.50% call_site=ffffffffb91ad3c7 ptr=0xffff88895fc05000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL
10.00% call_site=ffffffffb9258416 ptr=0xffff888a1dc61f00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO
7.50% call_site=ffffffffb9258416 ptr=0xffff888a2640ac00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO
2.50% call_site=ffffffffb92759ba ptr=0xffff888a26776000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb9276864 ptr=0xffff8886f6b82600 bytes_req=136 bytes_alloc=192 gfp_flags=GFP_KERNEL|__GFP_ZERO
2.50% call_site=ffffffffb9276903 ptr=0xffff888aefcf0460 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c98a00 bytes_req=392 bytes_alloc=512 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c9ba00 bytes_req=504 bytes_alloc=512 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad301 ptr=0xffff888a31747600 bytes_req=128 bytes_alloc=128 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad511 ptr=0xffff888a9d26a2a0 bytes_req=28 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c11a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c12c0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1540 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c16e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1c20 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff888a9d26a2a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931240 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931980 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931a00 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
#
# # And then limiting using the example for 'perf kmem stat --time' used
# # in the previous changeset committer note we see that there were no
# # kmem:kmalloc in that last part of the file, but there were some
# # kmem:kmem_cache_alloc ones:
#
# perf report --time 20119.782088, --stdio
#
# Total Lost Samples: 0
#
# Samples: 0 of event 'kmem:kmalloc'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
# Samples: 0 of event 'kmem:kmalloc_node'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
# Samples: 0 of event 'kmem:kfree'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
# Samples: 8 of event 'kmem:kmem_cache_alloc'
# Event count (approx.): 8
#
# Overhead Trace output
# ........ ..................................................................................................................
#
75.00% call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO
12.50% call_site=ffffffffb90ad33a ptr=0xffff8889f071f6e0 bytes_req=160 bytes_alloc=160 gfp_flags=GFP_ATOMIC|__GFP_NOTRACK
12.50% call_site=ffffffffb9287cc1 ptr=0xffff8889b12722d8 bytes_req=104 bytes_alloc=104 gfp_flags=GFP_NOFS|__GFP_ZERO
#
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-7-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:46 +08:00
|
|
|
|
2016-03-23 05:39:09 +08:00
|
|
|
if (machine__resolve(machine, &al, sample) < 0) {
|
2013-12-20 13:11:12 +08:00
|
|
|
pr_debug("problem processing %d event, skipping it.\n",
|
|
|
|
event->header.type);
|
2009-06-04 05:14:49 +08:00
|
|
|
return -1;
|
|
|
|
}
|
2009-05-28 02:20:24 +08:00
|
|
|
|
2015-11-26 15:08:20 +08:00
|
|
|
if (symbol_conf.hide_unresolved && al.sym == NULL)
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
|
|
|
goto out_put;
|
2009-07-01 06:01:22 +08:00
|
|
|
|
2011-11-17 22:19:04 +08:00
|
|
|
if (rep->cpu_list && !test_bit(sample->cpu, rep->cpu_bitmap))
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
|
|
|
goto out_put;
|
2011-07-04 19:57:50 +08:00
|
|
|
|
2015-09-25 21:15:42 +08:00
|
|
|
if (sort__mode == SORT_MODE__BRANCH) {
|
|
|
|
/*
|
|
|
|
* A non-synthesized event might not have a branch stack if
|
|
|
|
* branch stacks have been synthesized (using itrace options).
|
|
|
|
*/
|
|
|
|
if (!sample->branch_stack)
|
|
|
|
goto out_put;
|
2017-07-18 20:13:14 +08:00
|
|
|
|
|
|
|
iter.add_entry_cb = hist_iter__branch_callback;
|
2013-10-30 08:40:34 +08:00
|
|
|
iter.ops = &hist_iter_branch;
|
2015-09-25 21:15:42 +08:00
|
|
|
} else if (rep->mem_mode) {
|
2013-10-30 08:40:34 +08:00
|
|
|
iter.ops = &hist_iter_mem;
|
2015-09-25 21:15:42 +08:00
|
|
|
} else if (symbol_conf.cumulate_callchain) {
|
2012-09-11 13:13:04 +08:00
|
|
|
iter.ops = &hist_iter_cumulative;
|
2015-09-25 21:15:42 +08:00
|
|
|
} else {
|
2013-10-30 08:40:34 +08:00
|
|
|
iter.ops = &hist_iter_normal;
|
2015-09-25 21:15:42 +08:00
|
|
|
}
|
2013-10-30 08:40:34 +08:00
|
|
|
|
|
|
|
if (al.map != NULL)
|
|
|
|
al.map->dso->hit = 1;
|
|
|
|
|
2015-05-19 16:04:10 +08:00
|
|
|
ret = hist_entry_iter__add(&iter, &al, rep->max_stack, rep);
|
2013-10-30 08:40:34 +08:00
|
|
|
if (ret < 0)
|
|
|
|
pr_debug("problem adding hist entry, skipping event\n");
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
|
|
|
out_put:
|
|
|
|
addr_location__put(&al);
|
2013-05-14 10:09:02 +08:00
|
|
|
return ret;
|
2009-06-04 05:14:49 +08:00
|
|
|
}
|
2009-06-03 15:38:58 +08:00
|
|
|
|
2011-11-28 18:30:20 +08:00
|
|
|
static int process_read_event(struct perf_tool *tool,
|
2011-11-25 18:19:45 +08:00
|
|
|
union perf_event *event,
|
2012-09-11 06:15:03 +08:00
|
|
|
struct perf_sample *sample __maybe_unused,
|
2011-11-28 17:56:39 +08:00
|
|
|
struct perf_evsel *evsel,
|
2012-09-11 06:15:03 +08:00
|
|
|
struct machine *machine __maybe_unused)
|
2009-06-25 04:46:04 +08:00
|
|
|
{
|
2013-12-20 01:53:53 +08:00
|
|
|
struct report *rep = container_of(tool, struct report, tool);
|
2011-11-28 17:56:39 +08:00
|
|
|
|
2011-11-17 22:19:04 +08:00
|
|
|
if (rep->show_threads) {
|
2012-06-12 23:34:58 +08:00
|
|
|
const char *name = evsel ? perf_evsel__name(evsel) : "unknown";
|
2016-10-15 05:23:11 +08:00
|
|
|
int err = perf_read_values_add_value(&rep->show_threads_values,
|
2009-08-07 19:55:24 +08:00
|
|
|
event->read.pid, event->read.tid,
|
2017-08-25 00:27:36 +08:00
|
|
|
evsel->idx,
|
2009-08-07 19:55:24 +08:00
|
|
|
name,
|
|
|
|
event->read.value);
|
2016-10-15 05:23:11 +08:00
|
|
|
|
|
|
|
if (err)
|
|
|
|
return err;
|
2009-08-07 19:55:24 +08:00
|
|
|
}
|
|
|
|
|
2009-06-25 04:46:04 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-06-12 03:48:41 +08:00
|
|
|
/* For pipe mode, sample_type is not currently set */
|
2013-12-20 01:53:53 +08:00
|
|
|
static int report__setup_sample_type(struct report *rep)
|
2009-06-04 05:14:49 +08:00
|
|
|
{
|
2013-10-23 06:01:31 +08:00
|
|
|
struct perf_session *session = rep->session;
|
|
|
|
u64 sample_type = perf_evlist__combined_sample_type(session->evlist);
|
2017-01-24 05:07:59 +08:00
|
|
|
bool is_pipe = perf_data__is_pipe(session->data);
|
2011-11-25 18:19:45 +08:00
|
|
|
|
2015-09-25 21:15:33 +08:00
|
|
|
if (session->itrace_synth_opts->callchain ||
|
|
|
|
(!is_pipe &&
|
|
|
|
perf_header__has_feat(&session->header, HEADER_AUXTRACE) &&
|
|
|
|
!session->itrace_synth_opts->set))
|
|
|
|
sample_type |= PERF_SAMPLE_CALLCHAIN;
|
|
|
|
|
2015-09-25 21:15:40 +08:00
|
|
|
if (session->itrace_synth_opts->last_branch)
|
|
|
|
sample_type |= PERF_SAMPLE_BRANCH_STACK;
|
|
|
|
|
2013-10-15 22:27:34 +08:00
|
|
|
if (!is_pipe && !(sample_type & PERF_SAMPLE_CALLCHAIN)) {
|
2016-05-03 19:54:43 +08:00
|
|
|
if (perf_hpp_list.parent) {
|
2012-05-29 12:22:57 +08:00
|
|
|
ui__error("Selected --sort parent, but no "
|
2011-08-03 23:33:24 +08:00
|
|
|
"callchain data. Did you call "
|
|
|
|
"'perf record' without -g?\n");
|
2009-12-28 07:37:02 +08:00
|
|
|
return -EINVAL;
|
2009-07-05 13:39:17 +08:00
|
|
|
}
|
perf report: Make --branch-history work without callgraphs(-g) option in perf record
perf record -b -g <command>
perf report --branch-history
This merges the LBRs with the callgraphs.
However it would be nice if it also works without callgraphs (-g) set in
perf record, so that only the LBRs are displayed. But currently perf
report errors in this case. For example,
perf record -b <command>
perf report --branch-history
Error:
Selected -g or --branch-history but no callchain data. Did
you call 'perf record' without -g?
This patch displays the LBRs only even if callgraphs(-g) is not enabled
in perf record.
Change log:
v2: According to Milian Wolff's comment, change the obsolete error
message. Now the error message is:
┌─Error:─────────────────────────────────────┐
│Selected -g or --branch-history. │
│But no callchain or branch data. │
│Did you call 'perf record' without -g or -b?│
│ │
│ │
│Press any key... │
└────────────────────────────────────────────┘
When passing the last parameter to hists__fprintf,
changes "|" to "||".
hists__fprintf(hists, !quiet, 0, 0, rep->min_percent, stdout,
symbol_conf.use_callchain || symbol_conf.show_branchflag_count);
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1494240182-28899-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-05-08 18:43:02 +08:00
|
|
|
if (symbol_conf.use_callchain &&
|
|
|
|
!symbol_conf.show_branchflag_count) {
|
|
|
|
ui__error("Selected -g or --branch-history.\n"
|
|
|
|
"But no callchain or branch data.\n"
|
|
|
|
"Did you call 'perf record' without -g or -b?\n");
|
2009-10-07 18:47:31 +08:00
|
|
|
return -1;
|
2009-07-05 13:39:17 +08:00
|
|
|
}
|
2016-04-18 22:54:31 +08:00
|
|
|
} else if (!callchain_param.enabled &&
|
2011-11-17 22:19:04 +08:00
|
|
|
callchain_param.mode != CHAIN_NONE &&
|
2010-01-05 21:54:45 +08:00
|
|
|
!symbol_conf.use_callchain) {
|
2009-12-16 06:04:42 +08:00
|
|
|
symbol_conf.use_callchain = true;
|
2011-01-14 11:52:00 +08:00
|
|
|
if (callchain_register_param(&callchain_param) < 0) {
|
2012-05-29 12:22:57 +08:00
|
|
|
ui__error("Can't register callchain params.\n");
|
2009-12-28 07:37:02 +08:00
|
|
|
return -EINVAL;
|
2009-08-08 08:16:24 +08:00
|
|
|
}
|
2009-06-19 05:22:55 +08:00
|
|
|
}
|
|
|
|
|
2013-10-30 16:05:55 +08:00
|
|
|
if (symbol_conf.cumulate_callchain) {
|
|
|
|
/* Silently ignore if callchain is missing */
|
|
|
|
if (!(sample_type & PERF_SAMPLE_CALLCHAIN)) {
|
|
|
|
symbol_conf.cumulate_callchain = false;
|
|
|
|
perf_hpp__cancel_cumulate();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2013-04-01 19:35:20 +08:00
|
|
|
if (sort__mode == SORT_MODE__BRANCH) {
|
2013-10-15 22:27:34 +08:00
|
|
|
if (!is_pipe &&
|
2012-08-02 06:15:52 +08:00
|
|
|
!(sample_type & PERF_SAMPLE_BRANCH_STACK)) {
|
2012-05-29 12:22:57 +08:00
|
|
|
ui__error("Selected -b but no branch data. "
|
|
|
|
"Did you call perf record without -b?\n");
|
perf report: Add support for taken branch sampling
This patch adds support for taken branch sampling, i.e, the
PERF_SAMPLE_BRANCH_STACK feature to perf report. In other
words, to display histograms based on taken branches rather
than executed instructions addresses.
The new option is called -b and it takes no argument. To
generate meaningful output, the perf.data must have been
obtained using perf record -b xxx ... where xxx is a branch
filter option.
The output shows symbols, modules, sorted by 'who branches
where' the most often. The percentages reported in the first
column refer to the total number of branches captured and
not the usual number of samples.
Here is a quick example.
Here branchy is simple test program which looks as follows:
void f2(void)
{}
void f3(void)
{}
void f1(unsigned long n)
{
if (n & 1UL)
f2();
else
f3();
}
int main(void)
{
unsigned long i;
for (i=0; i < N; i++)
f1(i);
return 0;
}
Here is the output captured on Nehalem, if we are
only interested in user level function calls.
$ perf record -b any_call,u -e cycles:u branchy
$ perf report -b --sort=symbol
52.34% [.] main [.] f1
24.04% [.] f1 [.] f3
23.60% [.] f1 [.] f2
0.01% [k] _IO_new_file_xsputn [k] _IO_file_overflow
0.01% [k] _IO_vfprintf_internal [k] _IO_new_file_xsputn
0.01% [k] _IO_vfprintf_internal [k] strchrnul
0.01% [k] __printf [k] _IO_vfprintf_internal
0.01% [k] main [k] __printf
About half (52%) of the call branches captured are from main()
-> f1(). The second half (24%+23%) is split in two equal shares
between f1() -> f2(), f1() ->f3(). The output is as expected
given the code.
It should be noted, that using -b in perf record does not
eliminate information in the perf.data file. Consequently, a
typical profile can also be obtained by perf report by simply
not using its -b option.
It is possible to sort on branch related columns:
- dso_from, symbol_from
- dso_to, symbol_to
- mispredict
Signed-off-by: Roberto Agostino Vitillo <ravitillo@lbl.gov>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: acme@redhat.com
Cc: robert.richter@amd.com
Cc: ming.m.lin@intel.com
Cc: andi@firstfloor.org
Cc: asharma@fb.com
Cc: vweaver1@eecs.utk.edu
Cc: khandual@linux.vnet.ibm.com
Cc: dsahern@gmail.com
Link: http://lkml.kernel.org/r/1328826068-11713-14-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-10 06:21:03 +08:00
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-10-06 08:45:59 +08:00
|
|
|
if (symbol_conf.use_callchain || symbol_conf.cumulate_callchain) {
|
|
|
|
if ((sample_type & PERF_SAMPLE_REGS_USER) &&
|
perf unwind: Do not look just at the global callchain_param.record_mode
When setting up DWARF callchains on specific events, without using
'record' or 'trace' --call-graph, but instead doing it like:
perf trace -e cycles/call-graph=dwarf/
The unwind__prepare_access() call in thread__insert_map() when we
process PERF_RECORD_MMAP(2) metadata events were not being performed,
precluding us from using per-event DWARF callchains, handling them just
when we asked for all events to be DWARF, using "--call-graph dwarf".
We do it in the PERF_RECORD_MMAP because we have to look at one of the
executable maps to figure out the executable type (64-bit, 32-bit) of
the DSO laid out in that mmap. Also to look at the architecture where
the perf.data file was recorded.
All this probably should be deferred to when we process a sample for
some thread that has callchains, so that we do this processing only for
the threads with samples, not for all of them.
For now, fix using DWARF on specific events.
Before:
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.048 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.048/0.048/0.048/0.000 ms
0.000 probe_libc:inet_pton:(7fe9597bb350))
Problem processing probe_libc:inet_pton callchain, skipping...
#
After:
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.060 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.060/0.060/0.060/0.000 ms
0.000 probe_libc:inet_pton:(7fd4aa930350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa804e51af3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa804e51b379] (/usr/bin/ping)
#
# perf trace --call-graph=dwarf --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.057 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.057/0.057/0.057/0.000 ms
0.000 probe_libc:inet_pton:(7f9363b9e350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffa9e8a14e0f3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffa9e8a14e1379] (/usr/bin/ping)
#
# perf trace --call-graph=fp --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.077 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.077/0.077/0.077/0.000 ms
0.000 probe_libc:inet_pton:(7f4947e1c350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa716d88ef3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa716d88f379] (/usr/bin/ping)
#
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=fp/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.078 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.078/0.078/0.078/0.000 ms
0.000 probe_libc:inet_pton:(7fa157696350))
__GI___inet_pton (/usr/lib64/libc-2.26.so)
getaddrinfo (/usr/lib64/libc-2.26.so)
[0xffffa9ba39c74f40] (/usr/bin/ping)
#
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/r/20180116182650.GE16107@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-16 03:48:46 +08:00
|
|
|
(sample_type & PERF_SAMPLE_STACK_USER)) {
|
2014-10-06 08:45:59 +08:00
|
|
|
callchain_param.record_mode = CALLCHAIN_DWARF;
|
perf unwind: Do not look just at the global callchain_param.record_mode
When setting up DWARF callchains on specific events, without using
'record' or 'trace' --call-graph, but instead doing it like:
perf trace -e cycles/call-graph=dwarf/
The unwind__prepare_access() call in thread__insert_map() when we
process PERF_RECORD_MMAP(2) metadata events were not being performed,
precluding us from using per-event DWARF callchains, handling them just
when we asked for all events to be DWARF, using "--call-graph dwarf".
We do it in the PERF_RECORD_MMAP because we have to look at one of the
executable maps to figure out the executable type (64-bit, 32-bit) of
the DSO laid out in that mmap. Also to look at the architecture where
the perf.data file was recorded.
All this probably should be deferred to when we process a sample for
some thread that has callchains, so that we do this processing only for
the threads with samples, not for all of them.
For now, fix using DWARF on specific events.
Before:
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.048 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.048/0.048/0.048/0.000 ms
0.000 probe_libc:inet_pton:(7fe9597bb350))
Problem processing probe_libc:inet_pton callchain, skipping...
#
After:
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.060 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.060/0.060/0.060/0.000 ms
0.000 probe_libc:inet_pton:(7fd4aa930350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa804e51af3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa804e51b379] (/usr/bin/ping)
#
# perf trace --call-graph=dwarf --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.057 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.057/0.057/0.057/0.000 ms
0.000 probe_libc:inet_pton:(7f9363b9e350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffa9e8a14e0f3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffa9e8a14e1379] (/usr/bin/ping)
#
# perf trace --call-graph=fp --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.077 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.077/0.077/0.077/0.000 ms
0.000 probe_libc:inet_pton:(7f4947e1c350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa716d88ef3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa716d88f379] (/usr/bin/ping)
#
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=fp/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.078 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.078/0.078/0.078/0.000 ms
0.000 probe_libc:inet_pton:(7fa157696350))
__GI___inet_pton (/usr/lib64/libc-2.26.so)
getaddrinfo (/usr/lib64/libc-2.26.so)
[0xffffa9ba39c74f40] (/usr/bin/ping)
#
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/r/20180116182650.GE16107@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-16 03:48:46 +08:00
|
|
|
dwarf_callchain_users = true;
|
|
|
|
} else if (sample_type & PERF_SAMPLE_BRANCH_STACK)
|
2015-01-06 02:23:04 +08:00
|
|
|
callchain_param.record_mode = CALLCHAIN_LBR;
|
2014-10-06 08:45:59 +08:00
|
|
|
else
|
|
|
|
callchain_param.record_mode = CALLCHAIN_FP;
|
|
|
|
}
|
2015-07-18 23:24:47 +08:00
|
|
|
|
|
|
|
/* ??? handle more cases than just ANY? */
|
|
|
|
if (!(perf_evlist__combined_branch_type(session->evlist) &
|
|
|
|
PERF_SAMPLE_BRANCH_ANY))
|
|
|
|
rep->nonany_branch_mode = true;
|
|
|
|
|
2009-10-07 18:47:31 +08:00
|
|
|
return 0;
|
|
|
|
}
|
2009-05-27 02:51:47 +08:00
|
|
|
|
2012-09-11 06:15:03 +08:00
|
|
|
static void sig_handler(int sig __maybe_unused)
|
2010-04-02 12:59:17 +08:00
|
|
|
{
|
|
|
|
session_done = 1;
|
|
|
|
}
|
|
|
|
|
2013-12-20 01:53:53 +08:00
|
|
|
static size_t hists__fprintf_nr_sample_events(struct hists *hists, struct report *rep,
|
2010-05-15 01:19:35 +08:00
|
|
|
const char *evname, FILE *fp)
|
|
|
|
{
|
|
|
|
size_t ret;
|
|
|
|
char unit;
|
2013-10-23 06:01:31 +08:00
|
|
|
unsigned long nr_samples = hists->stats.nr_events[PERF_RECORD_SAMPLE];
|
|
|
|
u64 nr_events = hists->stats.total_period;
|
|
|
|
struct perf_evsel *evsel = hists_to_evsel(hists);
|
2013-01-22 17:09:44 +08:00
|
|
|
char buf[512];
|
|
|
|
size_t size = sizeof(buf);
|
2015-09-04 22:45:45 +08:00
|
|
|
int socked_id = hists->socket_filter;
|
2013-01-22 17:09:44 +08:00
|
|
|
|
2017-02-17 16:17:39 +08:00
|
|
|
if (quiet)
|
|
|
|
return 0;
|
|
|
|
|
2014-01-14 10:52:48 +08:00
|
|
|
if (symbol_conf.filter_relative) {
|
|
|
|
nr_samples = hists->stats.nr_non_filtered_samples;
|
|
|
|
nr_events = hists->stats.total_non_filtered_period;
|
|
|
|
}
|
|
|
|
|
2013-03-05 13:53:26 +08:00
|
|
|
if (perf_evsel__is_group_event(evsel)) {
|
2013-01-22 17:09:44 +08:00
|
|
|
struct perf_evsel *pos;
|
|
|
|
|
|
|
|
perf_evsel__group_desc(evsel, buf, size);
|
|
|
|
evname = buf;
|
|
|
|
|
|
|
|
for_each_group_member(pos, evsel) {
|
2014-10-10 00:13:41 +08:00
|
|
|
const struct hists *pos_hists = evsel__hists(pos);
|
|
|
|
|
2014-01-14 10:52:48 +08:00
|
|
|
if (symbol_conf.filter_relative) {
|
2014-10-10 00:13:41 +08:00
|
|
|
nr_samples += pos_hists->stats.nr_non_filtered_samples;
|
|
|
|
nr_events += pos_hists->stats.total_non_filtered_period;
|
2014-01-14 10:52:48 +08:00
|
|
|
} else {
|
2014-10-10 00:13:41 +08:00
|
|
|
nr_samples += pos_hists->stats.nr_events[PERF_RECORD_SAMPLE];
|
|
|
|
nr_events += pos_hists->stats.total_period;
|
2014-01-14 10:52:48 +08:00
|
|
|
}
|
2013-01-22 17:09:44 +08:00
|
|
|
}
|
|
|
|
}
|
2010-05-15 01:19:35 +08:00
|
|
|
|
2012-04-06 10:01:01 +08:00
|
|
|
nr_samples = convert_unit(nr_samples, &unit);
|
|
|
|
ret = fprintf(fp, "# Samples: %lu%c", nr_samples, unit);
|
2010-05-15 01:19:35 +08:00
|
|
|
if (evname != NULL)
|
2012-04-06 10:01:01 +08:00
|
|
|
ret += fprintf(fp, " of event '%s'", evname);
|
|
|
|
|
2018-01-10 23:00:30 +08:00
|
|
|
if (rep->time_str)
|
|
|
|
ret += fprintf(fp, " (time slices: %s)", rep->time_str);
|
|
|
|
|
2015-08-11 18:30:49 +08:00
|
|
|
if (symbol_conf.show_ref_callgraph &&
|
|
|
|
strstr(evname, "call-graph=no")) {
|
|
|
|
ret += fprintf(fp, ", show reference callgraph");
|
|
|
|
}
|
|
|
|
|
2013-01-24 23:10:36 +08:00
|
|
|
if (rep->mem_mode) {
|
|
|
|
ret += fprintf(fp, "\n# Total weight : %" PRIu64, nr_events);
|
perf tools: Remove (null) value of "Sort order" for perf mem report
When '--sort' is not set, 'perf mem report" will print a null pointer as
the output value of sort order, so fix it.
Example:
Before this patch:
$ perf mem report
# To display the perf.data header info, please use --header/--header-only options.
#
# Samples: 18 of event 'cpu/mem-loads/pp'
# Total weight : 188
# Sort order : (null)
#
...
After this patch:
$ perf mem report
# To display the perf.data header info, please use --header/--header-only options.
#
# Samples: 18 of event 'cpu/mem-loads/pp'
# Total weight : 188
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked
#
...
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427082605-12881-1-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-23 11:50:05 +08:00
|
|
|
ret += fprintf(fp, "\n# Sort order : %s", sort_order ? : default_mem_sort_order);
|
2013-01-24 23:10:36 +08:00
|
|
|
} else
|
|
|
|
ret += fprintf(fp, "\n# Event count (approx.): %" PRIu64, nr_events);
|
2015-09-04 22:45:44 +08:00
|
|
|
|
2015-09-04 22:45:45 +08:00
|
|
|
if (socked_id > -1)
|
|
|
|
ret += fprintf(fp, "\n# Processor Socket: %d", socked_id);
|
2015-09-04 22:45:44 +08:00
|
|
|
|
2010-05-15 01:19:35 +08:00
|
|
|
return ret + fprintf(fp, "\n#\n");
|
|
|
|
}
|
|
|
|
|
2011-03-07 00:07:30 +08:00
|
|
|
static int perf_evlist__tty_browse_hists(struct perf_evlist *evlist,
|
2013-12-20 01:53:53 +08:00
|
|
|
struct report *rep,
|
2011-03-07 00:07:30 +08:00
|
|
|
const char *help)
|
2010-05-24 09:36:51 +08:00
|
|
|
{
|
2011-03-06 08:40:06 +08:00
|
|
|
struct perf_evsel *pos;
|
2010-05-24 09:36:51 +08:00
|
|
|
|
2017-02-17 16:17:39 +08:00
|
|
|
if (!quiet) {
|
|
|
|
fprintf(stdout, "#\n# Total Lost Samples: %" PRIu64 "\n#\n",
|
|
|
|
evlist->stats.total_lost_samples);
|
|
|
|
}
|
|
|
|
|
2016-06-23 22:26:15 +08:00
|
|
|
evlist__for_each_entry(evlist, pos) {
|
2014-10-10 00:13:41 +08:00
|
|
|
struct hists *hists = evsel__hists(pos);
|
2012-06-12 23:34:58 +08:00
|
|
|
const char *evname = perf_evsel__name(pos);
|
2010-05-24 09:36:51 +08:00
|
|
|
|
2013-01-22 17:09:43 +08:00
|
|
|
if (symbol_conf.event_group &&
|
|
|
|
!perf_evsel__is_group_leader(pos))
|
|
|
|
continue;
|
|
|
|
|
2013-12-20 01:53:53 +08:00
|
|
|
hists__fprintf_nr_sample_events(hists, rep, evname, stdout);
|
2017-02-17 16:17:39 +08:00
|
|
|
hists__fprintf(hists, !quiet, 0, 0, rep->min_percent, stdout,
|
perf report: Make --branch-history work without callgraphs(-g) option in perf record
perf record -b -g <command>
perf report --branch-history
This merges the LBRs with the callgraphs.
However it would be nice if it also works without callgraphs (-g) set in
perf record, so that only the LBRs are displayed. But currently perf
report errors in this case. For example,
perf record -b <command>
perf report --branch-history
Error:
Selected -g or --branch-history but no callchain data. Did
you call 'perf record' without -g?
This patch displays the LBRs only even if callgraphs(-g) is not enabled
in perf record.
Change log:
v2: According to Milian Wolff's comment, change the obsolete error
message. Now the error message is:
┌─Error:─────────────────────────────────────┐
│Selected -g or --branch-history. │
│But no callchain or branch data. │
│Did you call 'perf record' without -g or -b?│
│ │
│ │
│Press any key... │
└────────────────────────────────────────────┘
When passing the last parameter to hists__fprintf,
changes "|" to "||".
hists__fprintf(hists, !quiet, 0, 0, rep->min_percent, stdout,
symbol_conf.use_callchain || symbol_conf.show_branchflag_count);
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1494240182-28899-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-05-08 18:43:02 +08:00
|
|
|
symbol_conf.use_callchain ||
|
|
|
|
symbol_conf.show_branchflag_count);
|
2010-05-24 09:36:51 +08:00
|
|
|
fprintf(stdout, "\n\n");
|
|
|
|
}
|
|
|
|
|
2017-03-07 23:08:29 +08:00
|
|
|
if (!quiet)
|
2010-05-24 09:36:51 +08:00
|
|
|
fprintf(stdout, "#\n# (%s)\n#\n", help);
|
|
|
|
|
2015-05-11 21:44:39 +08:00
|
|
|
if (rep->show_threads) {
|
|
|
|
bool style = !strcmp(rep->pretty_printing_style, "raw");
|
|
|
|
perf_read_values_display(stdout, &rep->show_threads_values,
|
|
|
|
style);
|
|
|
|
perf_read_values_destroy(&rep->show_threads_values);
|
2010-05-24 09:36:51 +08:00
|
|
|
}
|
|
|
|
|
2017-07-18 20:13:14 +08:00
|
|
|
if (sort__mode == SORT_MODE__BRANCH)
|
|
|
|
branch_type_stat_display(stdout, &rep->brtype_stat);
|
|
|
|
|
2010-05-24 09:36:51 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-01-08 21:10:00 +08:00
|
|
|
static void report__warn_kptr_restrict(const struct report *rep)
|
|
|
|
{
|
2015-09-30 22:54:04 +08:00
|
|
|
struct map *kernel_map = machine__kernel_map(&rep->session->machines.host);
|
2015-04-08 18:59:32 +08:00
|
|
|
struct kmap *kernel_kmap = kernel_map ? map__kmap(kernel_map) : NULL;
|
2014-01-08 21:10:00 +08:00
|
|
|
|
2017-11-14 22:12:11 +08:00
|
|
|
if (perf_evlist__exclude_kernel(rep->session->evlist))
|
|
|
|
return;
|
|
|
|
|
2014-01-08 21:10:00 +08:00
|
|
|
if (kernel_map == NULL ||
|
|
|
|
(kernel_map->dso->hit &&
|
|
|
|
(kernel_kmap->ref_reloc_sym == NULL ||
|
|
|
|
kernel_kmap->ref_reloc_sym->addr == 0))) {
|
|
|
|
const char *desc =
|
|
|
|
"As no suitable kallsyms nor vmlinux was found, kernel samples\n"
|
|
|
|
"can't be resolved.";
|
|
|
|
|
|
|
|
if (kernel_map) {
|
|
|
|
const struct dso *kdso = kernel_map->dso;
|
|
|
|
if (!RB_EMPTY_ROOT(&kdso->symbols[MAP__FUNCTION])) {
|
|
|
|
desc = "If some relocation was applied (e.g. "
|
|
|
|
"kexec) symbols may be misresolved.";
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
ui__warning(
|
|
|
|
"Kernel address maps (/proc/{kallsyms,modules}) were restricted.\n\n"
|
|
|
|
"Check /proc/sys/kernel/kptr_restrict before running 'perf record'.\n\n%s\n\n"
|
|
|
|
"Samples in kernel modules can't be resolved as well.\n\n",
|
|
|
|
desc);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-01-08 23:22:07 +08:00
|
|
|
static int report__gtk_browse_hists(struct report *rep, const char *help)
|
|
|
|
{
|
|
|
|
int (*hist_browser)(struct perf_evlist *evlist, const char *help,
|
|
|
|
struct hist_browser_timer *timer, float min_pcnt);
|
|
|
|
|
|
|
|
hist_browser = dlsym(perf_gtk_handle, "perf_evlist__gtk_browse_hists");
|
|
|
|
|
|
|
|
if (hist_browser == NULL) {
|
|
|
|
ui__error("GTK browser not found!\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return hist_browser(rep->session->evlist, help, NULL, rep->min_percent);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int report__browse_hists(struct report *rep)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
struct perf_session *session = rep->session;
|
|
|
|
struct perf_evlist *evlist = session->evlist;
|
2016-01-09 18:16:29 +08:00
|
|
|
const char *help = perf_tip(system_path(TIPDIR));
|
|
|
|
|
|
|
|
if (help == NULL) {
|
|
|
|
/* fallback for people who don't install perf ;-) */
|
|
|
|
help = perf_tip(DOCDIR);
|
|
|
|
if (help == NULL)
|
|
|
|
help = "Cannot load tips.txt file, please install perf!";
|
|
|
|
}
|
2014-01-08 23:22:07 +08:00
|
|
|
|
|
|
|
switch (use_browser) {
|
|
|
|
case 1:
|
|
|
|
ret = perf_evlist__tui_browse_hists(evlist, help, NULL,
|
|
|
|
rep->min_percent,
|
2018-01-19 05:26:29 +08:00
|
|
|
&session->header.env,
|
|
|
|
true);
|
2014-01-08 23:22:07 +08:00
|
|
|
/*
|
|
|
|
* Usually "ret" is the last pressed key, and we only
|
|
|
|
* care if the key notifies us to switch data file.
|
|
|
|
*/
|
|
|
|
if (ret != K_SWITCH_INPUT_DATA)
|
|
|
|
ret = 0;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
ret = report__gtk_browse_hists(rep, help);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
ret = perf_evlist__tty_browse_hists(evlist, rep, help);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2016-02-16 22:08:26 +08:00
|
|
|
static int report__collapse_hists(struct report *rep)
|
2014-01-09 01:45:24 +08:00
|
|
|
{
|
|
|
|
struct ui_progress prog;
|
|
|
|
struct perf_evsel *pos;
|
2016-02-16 22:08:26 +08:00
|
|
|
int ret = 0;
|
2014-01-09 01:45:24 +08:00
|
|
|
|
2014-04-22 08:47:25 +08:00
|
|
|
ui_progress__init(&prog, rep->nr_entries, "Merging related events...");
|
2014-01-09 01:45:24 +08:00
|
|
|
|
2016-06-23 22:26:15 +08:00
|
|
|
evlist__for_each_entry(rep->session->evlist, pos) {
|
2014-10-10 00:13:41 +08:00
|
|
|
struct hists *hists = evsel__hists(pos);
|
2014-01-09 01:45:24 +08:00
|
|
|
|
|
|
|
if (pos->idx == 0)
|
|
|
|
hists->symbol_filter_str = rep->symbol_filter_str;
|
|
|
|
|
2015-09-04 22:45:44 +08:00
|
|
|
hists->socket_filter = rep->socket_filter;
|
|
|
|
|
2016-02-16 22:08:26 +08:00
|
|
|
ret = hists__collapse_resort(hists, &prog);
|
|
|
|
if (ret < 0)
|
|
|
|
break;
|
2014-01-09 01:45:24 +08:00
|
|
|
|
|
|
|
/* Non-group events are considered as leader */
|
|
|
|
if (symbol_conf.event_group &&
|
|
|
|
!perf_evsel__is_group_leader(pos)) {
|
2014-10-10 00:13:41 +08:00
|
|
|
struct hists *leader_hists = evsel__hists(pos->leader);
|
2014-01-09 01:45:24 +08:00
|
|
|
|
|
|
|
hists__match(leader_hists, hists);
|
|
|
|
hists__link(leader_hists, hists);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
ui_progress__finish();
|
2016-02-16 22:08:26 +08:00
|
|
|
return ret;
|
2014-01-09 01:45:24 +08:00
|
|
|
}
|
|
|
|
|
2014-12-22 12:44:10 +08:00
|
|
|
static void report__output_resort(struct report *rep)
|
|
|
|
{
|
|
|
|
struct ui_progress prog;
|
|
|
|
struct perf_evsel *pos;
|
|
|
|
|
|
|
|
ui_progress__init(&prog, rep->nr_entries, "Sorting events for output...");
|
|
|
|
|
2016-06-23 22:26:15 +08:00
|
|
|
evlist__for_each_entry(rep->session->evlist, pos)
|
2016-01-18 17:24:00 +08:00
|
|
|
perf_evsel__output_resort(pos, &prog);
|
2014-12-22 12:44:10 +08:00
|
|
|
|
|
|
|
ui_progress__finish();
|
|
|
|
}
|
|
|
|
|
2018-01-08 00:03:55 +08:00
|
|
|
static void stats_setup(struct report *rep)
|
|
|
|
{
|
|
|
|
memset(&rep->tool, 0, sizeof(rep->tool));
|
|
|
|
rep->tool.no_warn = true;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int stats_print(struct report *rep)
|
|
|
|
{
|
|
|
|
struct perf_session *session = rep->session;
|
|
|
|
|
|
|
|
perf_session__fprintf_nr_events(session, stdout);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-01-08 00:03:56 +08:00
|
|
|
static void tasks_setup(struct report *rep)
|
|
|
|
{
|
|
|
|
memset(&rep->tool, 0, sizeof(rep->tool));
|
perf report: Ask for ordered events for --tasks option
If we have the time in, keep the events in time order.
Committer notes:
Trying to be more verbose, what actual effect this will have in this particular
case?
Before and after this patch shows the artifacts:
--- /tmp/before 2018-02-06 15:40:29.536411625 -0300
+++ /tmp/after 2018-02-06 15:40:51.963403599 -0300
@@ -5,34 +5,34 @@
2540 2540 1818 | gnome-terminal-
3489 3489 2540 | bash
32433 32433 3489 | perf
- 32434 32434 32433 | perf
+ 32434 32434 32433 | make
32441 32441 32434 | make
32514 32514 32441 | make
511 511 32514 | sh
- 512 512 511 | sh
+ 512 512 511 | install
<SNIP>
We don't have 'perf' calling 'perf' calling 'make', etc, the second
'perf' actually is 'make', i.e. there was reordering of the relevant
PERF_RECORD_COMM and PERF_RECORD_FORK records.
Ditto for sh/install later on.
Look for FORK and COMM meta events, for those tids:
# perf report -D | egrep 'PERF_RECORD_(FORK|COMM)' | egrep '3243[34]'
0 14774650990679 0x1a3cd8 [0x38]: PERF_RECORD_FORK(32433:32433):(3489:3489)
1 14774652080381 0x1d6568 [0x30]: PERF_RECORD_COMM exec: perf:32433/32433
1 14774742473340 0x1dbb48 [0x38]: PERF_RECORD_FORK(32434:32434):(32433:32433)
0 14774752005779 0x1a4af8 [0x30]: PERF_RECORD_COMM exec: make:32434/32434
0 14774753997960 0x1a5578 [0x38]: PERF_RECORD_FORK(32435:32435):(32434:32434)
0 14774756070782 0x1a5618 [0x38]: PERF_RECORD_FORK(32438:32438):(32434:32434)
0 14774757772939 0x1a5680 [0x38]: PERF_RECORD_FORK(32440:32440):(32434:32434)
0 14774758230600 0x1a56e8 [0x38]: PERF_RECORD_FORK(32441:32441):(32434:32434)
#
First column is the cpu, second is the timestamp.
So they are on different CPUs, thus ring buffers, and when we don't use
the ordered_events class, we end up mixing that up, use it to take
advantage of the PERF_RECORD_FINISHED_ROUND meta events to go on
ordering the events using the PERF_SAMPLE_TIME present in the
PERF_RECORD_{FORK,COMM,EXIT,SAMPLE,etc} records in the ring buffer.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180206181813.10943-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-07 02:17:57 +08:00
|
|
|
rep->tool.ordered_events = true;
|
2018-01-10 02:25:03 +08:00
|
|
|
if (rep->mmaps_mode) {
|
|
|
|
rep->tool.mmap = perf_event__process_mmap;
|
|
|
|
rep->tool.mmap2 = perf_event__process_mmap2;
|
|
|
|
}
|
2018-01-08 00:03:56 +08:00
|
|
|
rep->tool.comm = perf_event__process_comm;
|
|
|
|
rep->tool.exit = perf_event__process_exit;
|
|
|
|
rep->tool.fork = perf_event__process_fork;
|
|
|
|
rep->tool.no_warn = true;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct task {
|
|
|
|
struct thread *thread;
|
|
|
|
struct list_head list;
|
|
|
|
struct list_head children;
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct task *tasks_list(struct task *task, struct machine *machine)
|
|
|
|
{
|
|
|
|
struct thread *parent_thread, *thread = task->thread;
|
|
|
|
struct task *parent_task;
|
|
|
|
|
|
|
|
/* Already listed. */
|
|
|
|
if (!list_empty(&task->list))
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
/* Last one in the chain. */
|
|
|
|
if (thread->ppid == -1)
|
|
|
|
return task;
|
|
|
|
|
|
|
|
parent_thread = machine__find_thread(machine, -1, thread->ppid);
|
|
|
|
if (!parent_thread)
|
|
|
|
return ERR_PTR(-ENOENT);
|
|
|
|
|
|
|
|
parent_task = thread__priv(parent_thread);
|
|
|
|
list_add_tail(&task->list, &parent_task->children);
|
|
|
|
return tasks_list(parent_task, machine);
|
|
|
|
}
|
|
|
|
|
2018-01-10 02:25:03 +08:00
|
|
|
static size_t maps__fprintf_task(struct maps *maps, int indent, FILE *fp)
|
|
|
|
{
|
|
|
|
size_t printed = 0;
|
|
|
|
struct rb_node *nd;
|
|
|
|
|
|
|
|
for (nd = rb_first(&maps->entries); nd; nd = rb_next(nd)) {
|
|
|
|
struct map *map = rb_entry(nd, struct map, rb_node);
|
|
|
|
|
|
|
|
printed += fprintf(fp, "%*s %" PRIx64 "-%" PRIx64 " %c%c%c%c %08" PRIx64 " %" PRIu64 " %s\n",
|
|
|
|
indent, "", map->start, map->end,
|
|
|
|
map->prot & PROT_READ ? 'r' : '-',
|
|
|
|
map->prot & PROT_WRITE ? 'w' : '-',
|
|
|
|
map->prot & PROT_EXEC ? 'x' : '-',
|
|
|
|
map->flags & MAP_SHARED ? 's' : 'p',
|
|
|
|
map->pgoff,
|
|
|
|
map->ino, map->dso->name);
|
|
|
|
}
|
|
|
|
|
|
|
|
return printed;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int map_groups__fprintf_task(struct map_groups *mg, int indent, FILE *fp)
|
|
|
|
{
|
|
|
|
int printed = 0, i;
|
|
|
|
for (i = 0; i < MAP__NR_TYPES; ++i)
|
|
|
|
printed += maps__fprintf_task(&mg->maps[i], indent, fp);
|
|
|
|
return printed;
|
|
|
|
}
|
|
|
|
|
2018-01-08 00:03:56 +08:00
|
|
|
static void task__print_level(struct task *task, FILE *fp, int level)
|
|
|
|
{
|
|
|
|
struct thread *thread = task->thread;
|
|
|
|
struct task *child;
|
2018-01-10 02:25:03 +08:00
|
|
|
int comm_indent = fprintf(fp, " %8d %8d %8d |%*s",
|
|
|
|
thread->pid_, thread->tid, thread->ppid,
|
|
|
|
level, "");
|
|
|
|
|
|
|
|
fprintf(fp, "%s\n", thread__comm_str(thread));
|
2018-01-08 00:03:56 +08:00
|
|
|
|
2018-01-10 02:25:03 +08:00
|
|
|
map_groups__fprintf_task(thread->mg, comm_indent, fp);
|
2018-01-08 00:03:56 +08:00
|
|
|
|
|
|
|
if (!list_empty(&task->children)) {
|
|
|
|
list_for_each_entry(child, &task->children, list)
|
|
|
|
task__print_level(child, fp, level + 1);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tasks_print(struct report *rep, FILE *fp)
|
|
|
|
{
|
|
|
|
struct perf_session *session = rep->session;
|
|
|
|
struct machine *machine = &session->machines.host;
|
|
|
|
struct task *tasks, *task;
|
|
|
|
unsigned int nr = 0, itask = 0, i;
|
|
|
|
struct rb_node *nd;
|
|
|
|
LIST_HEAD(list);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* No locking needed while accessing machine->threads,
|
|
|
|
* because --tasks is single threaded command.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Count all the threads. */
|
|
|
|
for (i = 0; i < THREADS__TABLE_SIZE; i++)
|
|
|
|
nr += machine->threads[i].nr;
|
|
|
|
|
|
|
|
tasks = malloc(sizeof(*tasks) * nr);
|
|
|
|
if (!tasks)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
for (i = 0; i < THREADS__TABLE_SIZE; i++) {
|
|
|
|
struct threads *threads = &machine->threads[i];
|
|
|
|
|
|
|
|
for (nd = rb_first(&threads->entries); nd; nd = rb_next(nd)) {
|
|
|
|
task = tasks + itask++;
|
|
|
|
|
|
|
|
task->thread = rb_entry(nd, struct thread, rb_node);
|
|
|
|
INIT_LIST_HEAD(&task->children);
|
|
|
|
INIT_LIST_HEAD(&task->list);
|
|
|
|
thread__set_priv(task->thread, task);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Iterate every task down to the unprocessed parent
|
|
|
|
* and link all in task children list. Task with no
|
|
|
|
* parent is added into 'list'.
|
|
|
|
*/
|
|
|
|
for (itask = 0; itask < nr; itask++) {
|
|
|
|
task = tasks + itask;
|
|
|
|
|
|
|
|
if (!list_empty(&task->list))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
task = tasks_list(task, machine);
|
|
|
|
if (IS_ERR(task)) {
|
|
|
|
pr_err("Error: failed to process tasks\n");
|
|
|
|
free(tasks);
|
|
|
|
return PTR_ERR(task);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (task)
|
|
|
|
list_add_tail(&task->list, &list);
|
|
|
|
}
|
|
|
|
|
|
|
|
fprintf(fp, "# %8s %8s %8s %s\n", "pid", "tid", "ppid", "comm");
|
|
|
|
|
|
|
|
list_for_each_entry(task, &list, list)
|
|
|
|
task__print_level(task, fp, 0);
|
|
|
|
|
|
|
|
free(tasks);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-12-20 01:53:53 +08:00
|
|
|
static int __cmd_report(struct report *rep)
|
2009-10-07 18:47:31 +08:00
|
|
|
{
|
2014-01-09 01:45:24 +08:00
|
|
|
int ret;
|
2012-03-09 06:47:47 +08:00
|
|
|
struct perf_session *session = rep->session;
|
2011-03-06 08:40:06 +08:00
|
|
|
struct perf_evsel *pos;
|
2017-01-24 05:07:59 +08:00
|
|
|
struct perf_data *data = session->data;
|
2009-05-18 23:45:42 +08:00
|
|
|
|
2010-04-02 12:59:17 +08:00
|
|
|
signal(SIGINT, sig_handler);
|
|
|
|
|
2011-11-17 22:19:04 +08:00
|
|
|
if (rep->cpu_list) {
|
|
|
|
ret = perf_session__cpu_bitmap(session, rep->cpu_list,
|
|
|
|
rep->cpu_bitmap);
|
2015-11-28 01:32:37 +08:00
|
|
|
if (ret) {
|
|
|
|
ui__error("failed to set cpu bitmap\n");
|
2013-06-25 19:54:13 +08:00
|
|
|
return ret;
|
2015-11-28 01:32:37 +08:00
|
|
|
}
|
2017-05-26 16:17:38 +08:00
|
|
|
session->itrace_synth_opts->cpu_bitmap = rep->cpu_bitmap;
|
2011-07-04 19:57:50 +08:00
|
|
|
}
|
|
|
|
|
2016-10-15 05:23:11 +08:00
|
|
|
if (rep->show_threads) {
|
|
|
|
ret = perf_read_values_init(&rep->show_threads_values);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
2009-06-19 05:22:55 +08:00
|
|
|
|
2013-12-20 01:53:53 +08:00
|
|
|
ret = report__setup_sample_type(rep);
|
2015-11-28 01:32:37 +08:00
|
|
|
if (ret) {
|
|
|
|
/* report__setup_sample_type() already showed error message */
|
2013-06-25 19:54:13 +08:00
|
|
|
return ret;
|
2015-11-28 01:32:37 +08:00
|
|
|
}
|
2009-12-28 07:37:02 +08:00
|
|
|
|
2018-01-08 00:03:55 +08:00
|
|
|
if (rep->stats_mode)
|
|
|
|
stats_setup(rep);
|
|
|
|
|
2018-01-08 00:03:56 +08:00
|
|
|
if (rep->tasks_mode)
|
|
|
|
tasks_setup(rep);
|
|
|
|
|
2015-03-03 22:58:45 +08:00
|
|
|
ret = perf_session__process_events(session);
|
2015-11-28 01:32:37 +08:00
|
|
|
if (ret) {
|
|
|
|
ui__error("failed to process sample\n");
|
2013-06-25 19:54:13 +08:00
|
|
|
return ret;
|
2015-11-28 01:32:37 +08:00
|
|
|
}
|
2009-05-27 00:48:58 +08:00
|
|
|
|
2018-01-08 00:03:55 +08:00
|
|
|
if (rep->stats_mode)
|
|
|
|
return stats_print(rep);
|
|
|
|
|
2018-01-08 00:03:56 +08:00
|
|
|
if (rep->tasks_mode)
|
|
|
|
return tasks_print(rep, stdout);
|
|
|
|
|
2014-01-08 21:10:00 +08:00
|
|
|
report__warn_kptr_restrict(rep);
|
perf symbols: Handle /proc/sys/kernel/kptr_restrict
Perf uses /proc/modules to figure out where kernel modules are loaded.
With the advent of kptr_restrict, non root users get zeroes for all module
start addresses.
So check if kptr_restrict is non zero and don't generate the syntethic
PERF_RECORD_MMAP events for them.
Warn the user about it in perf record and in perf report.
In perf report the reference relocation symbol being zero means that
kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't
use it to fixup symbol addresses when using a valid kallsyms (in the buildid
cache) or vmlinux (in the vmlinux path) build-id located automatically or
specified by the user.
Provide an explanation about it in 'perf report' if kernel samples were taken,
checking if a suitable vmlinux or kallsyms was found/specified.
Restricted /proc/kallsyms don't go to the buildid cache anymore.
Example:
[acme@emilia ~]$ perf record -F 100000 sleep 1
WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check
/proc/sys/kernel/kptr_restrict.
Samples in kernel functions may not be resolved if a suitable vmlinux file is
not found in the buildid cache or in the vmlinux path.
Samples in kernel modules won't be resolved at all.
If some relocation was applied (e.g. kexec) symbols may be misresolved even
with a suitable vmlinux or kallsyms file.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ]
[acme@emilia ~]$
[acme@emilia ~]$ perf report --stdio
Kernel address maps (/proc/{kallsyms,modules}) were restricted,
check /proc/sys/kernel/kptr_restrict before running 'perf record'.
If some relocation was applied (e.g. kexec) symbols may be misresolved.
Samples in kernel modules can't be resolved as well.
# Events: 13 cycles
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. .....................
#
20.24% sleep [kernel.kallsyms] [k] page_fault
20.04% sleep [kernel.kallsyms] [k] filemap_fault
19.78% sleep [kernel.kallsyms] [k] __lru_cache_add
19.69% sleep ld-2.12.so [.] memcpy
14.71% sleep [kernel.kallsyms] [k] dput
4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers
0.73% sleep [kernel.kallsyms] [k] perf_event_comm
0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
[acme@emilia ~]$
This is because it found a suitable vmlinux (build-id checked) in
/lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long
file name).
If we remove that file from the vmlinux path:
[root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \
/lib/modules/2.6.39-rc7+/build/vmlinux.OFF
[acme@emilia ~]$ perf report --stdio
[kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562
not found, continuing without symbols
Kernel address maps (/proc/{kallsyms,modules}) were restricted, check
/proc/sys/kernel/kptr_restrict before running 'perf record'.
As no suitable kallsyms nor vmlinux was found, kernel samples can't be
resolved.
Samples in kernel modules can't be resolved as well.
# Events: 13 cycles
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. ......
#
80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a
19.69% sleep ld-2.12.so [.] memcpy
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
[acme@emilia ~]$
Reported-by: Stephane Eranian <eranian@google.com>
Suggested-by: David Miller <davem@davemloft.net>
Cc: Dave Jones <davej@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 20:53:51 +08:00
|
|
|
|
2016-06-23 22:26:15 +08:00
|
|
|
evlist__for_each_entry(session->evlist, pos)
|
2014-12-22 12:44:09 +08:00
|
|
|
rep->nr_entries += evsel__hists(pos)->nr_entries;
|
|
|
|
|
2013-12-20 13:11:13 +08:00
|
|
|
if (use_browser == 0) {
|
|
|
|
if (verbose > 3)
|
|
|
|
perf_session__fprintf(session, stdout);
|
2009-06-05 00:54:00 +08:00
|
|
|
|
2013-12-20 13:11:13 +08:00
|
|
|
if (verbose > 2)
|
|
|
|
perf_session__fprintf_dsos(session, stdout);
|
2009-05-27 15:10:38 +08:00
|
|
|
|
2013-12-20 13:11:13 +08:00
|
|
|
if (dump_trace) {
|
|
|
|
perf_session__fprintf_nr_events(session, stdout);
|
2014-10-11 02:49:21 +08:00
|
|
|
perf_evlist__fprintf_nr_events(session->evlist, stdout);
|
2013-12-20 13:11:13 +08:00
|
|
|
return 0;
|
|
|
|
}
|
2012-08-07 21:20:46 +08:00
|
|
|
}
|
|
|
|
|
2016-02-16 22:08:26 +08:00
|
|
|
ret = report__collapse_hists(rep);
|
|
|
|
if (ret) {
|
|
|
|
ui__error("failed to process hist entry\n");
|
|
|
|
return ret;
|
|
|
|
}
|
2011-03-06 08:40:06 +08:00
|
|
|
|
2013-09-18 03:34:28 +08:00
|
|
|
if (session_done())
|
|
|
|
return 0;
|
|
|
|
|
2014-12-22 12:44:10 +08:00
|
|
|
/*
|
|
|
|
* recalculate number of entries after collapsing since it
|
|
|
|
* might be changed during the collapse phase.
|
|
|
|
*/
|
|
|
|
rep->nr_entries = 0;
|
2016-06-23 22:26:15 +08:00
|
|
|
evlist__for_each_entry(session->evlist, pos)
|
2014-12-22 12:44:10 +08:00
|
|
|
rep->nr_entries += evsel__hists(pos)->nr_entries;
|
|
|
|
|
2014-04-22 08:47:25 +08:00
|
|
|
if (rep->nr_entries == 0) {
|
2017-01-24 05:25:41 +08:00
|
|
|
ui__error("The %s file has no samples!\n", data->file.path);
|
2013-06-25 19:54:13 +08:00
|
|
|
return 0;
|
2010-03-05 23:51:09 +08:00
|
|
|
}
|
|
|
|
|
2014-12-22 12:44:10 +08:00
|
|
|
report__output_resort(rep);
|
2013-01-22 17:09:32 +08:00
|
|
|
|
2014-01-08 23:22:07 +08:00
|
|
|
return report__browse_hists(rep);
|
2009-05-18 23:45:42 +08:00
|
|
|
}
|
|
|
|
|
2009-07-02 23:58:21 +08:00
|
|
|
static int
|
2014-04-08 02:55:24 +08:00
|
|
|
report_parse_callchain_opt(const struct option *opt, const char *arg, int unset)
|
2009-07-02 23:58:21 +08:00
|
|
|
{
|
2016-04-18 22:54:31 +08:00
|
|
|
struct callchain_param *callchain = opt->value;
|
2009-07-03 02:14:33 +08:00
|
|
|
|
2016-04-18 22:54:31 +08:00
|
|
|
callchain->enabled = !unset;
|
2010-01-05 21:54:45 +08:00
|
|
|
/*
|
|
|
|
* --no-call-graph
|
|
|
|
*/
|
|
|
|
if (unset) {
|
2016-04-18 22:54:31 +08:00
|
|
|
symbol_conf.use_callchain = false;
|
|
|
|
callchain->mode = CHAIN_NONE;
|
2010-01-05 21:54:45 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-04-08 02:55:24 +08:00
|
|
|
return parse_callchain_report_opt(arg);
|
2009-07-02 23:58:21 +08:00
|
|
|
}
|
|
|
|
|
2012-12-07 13:48:05 +08:00
|
|
|
int
|
|
|
|
report_parse_ignore_callees_opt(const struct option *opt __maybe_unused,
|
|
|
|
const char *arg, int unset __maybe_unused)
|
|
|
|
{
|
|
|
|
if (arg) {
|
|
|
|
int err = regcomp(&ignore_callees_regex, arg, REG_EXTENDED);
|
|
|
|
if (err) {
|
|
|
|
char buf[BUFSIZ];
|
|
|
|
regerror(err, &ignore_callees_regex, buf, sizeof(buf));
|
|
|
|
pr_err("Invalid --ignore-callees regex: %s\n%s", arg, buf);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
have_ignore_callees = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-03-09 06:47:47 +08:00
|
|
|
static int
|
2016-12-12 21:52:10 +08:00
|
|
|
parse_branch_mode(const struct option *opt,
|
2012-09-11 06:15:03 +08:00
|
|
|
const char *str __maybe_unused, int unset)
|
2012-03-09 06:47:47 +08:00
|
|
|
{
|
2013-04-01 19:35:20 +08:00
|
|
|
int *branch_mode = opt->value;
|
|
|
|
|
|
|
|
*branch_mode = !unset;
|
2012-03-09 06:47:47 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-05-14 10:09:04 +08:00
|
|
|
static int
|
|
|
|
parse_percent_limit(const struct option *opt, const char *str,
|
|
|
|
int unset __maybe_unused)
|
|
|
|
{
|
2013-12-20 01:53:53 +08:00
|
|
|
struct report *rep = opt->value;
|
2016-01-27 23:40:50 +08:00
|
|
|
double pcnt = strtof(str, NULL);
|
2013-05-14 10:09:04 +08:00
|
|
|
|
2016-01-27 23:40:50 +08:00
|
|
|
rep->min_percent = pcnt;
|
|
|
|
callchain_param.min_percent = pcnt;
|
2013-05-14 10:09:04 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-11-09 13:45:41 +08:00
|
|
|
#define CALLCHAIN_DEFAULT_OPT "graph,0.5,caller,function,percent"
|
perf tools: Improve call graph documents and help messages
The --call-graph option is complex so we should provide better guide for
users. Also change help message to be consistent with config option
names. Now perf top will show help like below:
$ perf top --call-graph
Error: option `call-graph' requires a value
Usage: perf top [<options>]
--call-graph <record_mode[,record_size],print_type,threshold[,print_limit],order,sort_key[,branch]>
setup and enables call-graph (stack chain/backtrace):
record_mode: call graph recording mode (fp|dwarf|lbr)
record_size: if record_mode is 'dwarf', max size of stack recording (<bytes>)
default: 8192 (bytes)
print_type: call graph printing style (graph|flat|fractal|none)
threshold: minimum call graph inclusion threshold (<percent>)
print_limit: maximum number of call graph entry (<number>)
order: call graph order (caller|callee)
sort_key: call graph sort key (function|address)
branch: include last branch info to call graph (branch)
Default: fp,graph,0.5,caller,function
Requested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445524112-5201-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-22 22:28:32 +08:00
|
|
|
|
|
|
|
const char report_callchain_help[] = "Display call graph (stack chain/backtrace):\n\n"
|
|
|
|
CALLCHAIN_REPORT_HELP
|
|
|
|
"\n\t\t\t\tDefault: " CALLCHAIN_DEFAULT_OPT;
|
2015-10-22 14:28:48 +08:00
|
|
|
|
2017-03-27 22:47:20 +08:00
|
|
|
int cmd_report(int argc, const char **argv)
|
2011-11-25 18:19:45 +08:00
|
|
|
{
|
2012-03-09 06:47:47 +08:00
|
|
|
struct perf_session *session;
|
2015-04-25 03:29:45 +08:00
|
|
|
struct itrace_synth_opts itrace_synth_opts = { .set = 0, };
|
2011-12-07 17:02:54 +08:00
|
|
|
struct stat st;
|
2012-03-09 06:47:47 +08:00
|
|
|
bool has_br_stack = false;
|
2013-04-01 19:35:20 +08:00
|
|
|
int branch_mode = -1;
|
2014-11-13 10:05:22 +08:00
|
|
|
bool branch_call_mode = false;
|
perf tools: Improve call graph documents and help messages
The --call-graph option is complex so we should provide better guide for
users. Also change help message to be consistent with config option
names. Now perf top will show help like below:
$ perf top --call-graph
Error: option `call-graph' requires a value
Usage: perf top [<options>]
--call-graph <record_mode[,record_size],print_type,threshold[,print_limit],order,sort_key[,branch]>
setup and enables call-graph (stack chain/backtrace):
record_mode: call graph recording mode (fp|dwarf|lbr)
record_size: if record_mode is 'dwarf', max size of stack recording (<bytes>)
default: 8192 (bytes)
print_type: call graph printing style (graph|flat|fractal|none)
threshold: minimum call graph inclusion threshold (<percent>)
print_limit: maximum number of call graph entry (<number>)
order: call graph order (caller|callee)
sort_key: call graph sort key (function|address)
branch: include last branch info to call graph (branch)
Default: fp,graph,0.5,caller,function
Requested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445524112-5201-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-22 22:28:32 +08:00
|
|
|
char callchain_default_opt[] = CALLCHAIN_DEFAULT_OPT;
|
2011-11-25 18:19:45 +08:00
|
|
|
const char * const report_usage[] = {
|
2011-12-12 23:16:56 +08:00
|
|
|
"perf report [<options>]",
|
2011-11-25 18:19:45 +08:00
|
|
|
NULL
|
|
|
|
};
|
2018-02-09 17:27:34 +08:00
|
|
|
bool group_set = false;
|
2013-12-20 01:53:53 +08:00
|
|
|
struct report report = {
|
2011-11-28 18:30:20 +08:00
|
|
|
.tool = {
|
2011-11-25 18:19:45 +08:00
|
|
|
.sample = process_sample_event,
|
|
|
|
.mmap = perf_event__process_mmap,
|
2013-08-21 18:10:25 +08:00
|
|
|
.mmap2 = perf_event__process_mmap2,
|
2011-11-25 18:19:45 +08:00
|
|
|
.comm = perf_event__process_comm,
|
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info
Introduce a new option to record PERF_RECORD_NAMESPACES events emitted
by the kernel when fork, clone, setns or unshare are invoked. And update
perf-record documentation with the new option to record namespace
events.
Committer notes:
Combined it with a later patch to allow printing it via 'perf report -D'
and be able to test the feature introduced in this patch. Had to move
here also perf_ns__name(), that was introduced in another later patch.
Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt:
util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=]
ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx
^
Testing it:
# perf record --namespaces -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ]
#
# perf report -D
<SNIP>
3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
0x1151e0 [0x30]: event: 9
.
. ... raw event: size 48 bytes
. 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h....
. 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c....
. 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................
<SNIP>
NAMESPACES events: 1
<SNIP>
#
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 04:41:43 +08:00
|
|
|
.namespaces = perf_event__process_namespaces,
|
2012-10-07 02:44:59 +08:00
|
|
|
.exit = perf_event__process_exit,
|
|
|
|
.fork = perf_event__process_fork,
|
2011-11-25 18:19:45 +08:00
|
|
|
.lost = perf_event__process_lost,
|
|
|
|
.read = process_read_event,
|
|
|
|
.attr = perf_event__process_attr,
|
|
|
|
.tracing_data = perf_event__process_tracing_data,
|
|
|
|
.build_id = perf_event__process_build_id,
|
2015-04-25 03:29:45 +08:00
|
|
|
.id_index = perf_event__process_id_index,
|
|
|
|
.auxtrace_info = perf_event__process_auxtrace_info,
|
|
|
|
.auxtrace = perf_event__process_auxtrace,
|
perf tools: Add feature header record to pipe-mode
Add header record types to pipe-mode, reusing the functions
used in file-mode and leveraging the new struct feat_fd.
For alignment, check that synthesized events don't exceed
pagesize.
Add the perf_event__synthesize_feature event call back to
process the new header records.
Before this patch:
$ perf record -o - -e cycles sleep 1 | perf report --stdio --header
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
...
After this patch:
$ perf record -o - -e cycles sleep 1 | perf report --stdio --header
# ========
# captured on: Mon May 22 16:33:43 2017
# ========
#
# hostname : my_hostname
# os release : 4.11.0-dbx-up_perf
# perf version : 4.11.rc6.g6277c80
# arch : x86_64
# nrcpus online : 72
# nrcpus avail : 72
# cpudesc : Intel(R) Xeon(R) CPU E5-2696 v3 @ 2.30GHz
# cpuid : GenuineIntel,6,63,2
# total memory : 263457192 kB
# cmdline : /root/perf record -o - -e cycles -c 100000 sleep 1
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# pmu mappings: intel_bts = 6, uncore_imc_4 = 22, uncore_sbox_1 = 47, uncore_cbox_5 = 33, uncore_ha_0 = 16, uncore_cbox
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
...
Support added for the subcommands: report, inject, annotate and script.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-16-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-18 12:25:48 +08:00
|
|
|
.feature = perf_event__process_feature,
|
2014-07-06 20:18:21 +08:00
|
|
|
.ordered_events = true,
|
2011-11-25 18:19:45 +08:00
|
|
|
.ordering_requires_timestamps = true,
|
|
|
|
},
|
2016-05-19 22:34:06 +08:00
|
|
|
.max_stack = PERF_MAX_STACK_DEPTH,
|
2011-11-25 18:19:45 +08:00
|
|
|
.pretty_printing_style = "normal",
|
2015-09-04 22:45:44 +08:00
|
|
|
.socket_filter = -1,
|
2011-11-25 18:19:45 +08:00
|
|
|
};
|
|
|
|
const struct option options[] = {
|
2012-10-30 11:56:02 +08:00
|
|
|
OPT_STRING('i', "input", &input_name, "file",
|
2009-05-26 15:17:18 +08:00
|
|
|
"input file name"),
|
2010-04-13 16:37:33 +08:00
|
|
|
OPT_INCR('v', "verbose", &verbose,
|
2009-05-27 06:46:14 +08:00
|
|
|
"be more verbose (show symbol address, etc)"),
|
2017-02-17 16:17:39 +08:00
|
|
|
OPT_BOOLEAN('q', "quiet", &quiet, "Do not show any message"),
|
2009-05-27 00:48:58 +08:00
|
|
|
OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
|
|
|
|
"dump raw trace in ASCII"),
|
2018-01-08 00:03:55 +08:00
|
|
|
OPT_BOOLEAN(0, "stats", &report.stats_mode, "Display event stats"),
|
2018-01-08 00:03:56 +08:00
|
|
|
OPT_BOOLEAN(0, "tasks", &report.tasks_mode, "Display recorded tasks"),
|
2018-01-10 02:25:03 +08:00
|
|
|
OPT_BOOLEAN(0, "mmaps", &report.mmaps_mode, "Display recorded tasks memory maps"),
|
2009-11-24 22:05:15 +08:00
|
|
|
OPT_STRING('k', "vmlinux", &symbol_conf.vmlinux_name,
|
|
|
|
"file", "vmlinux pathname"),
|
2010-12-08 10:39:46 +08:00
|
|
|
OPT_STRING(0, "kallsyms", &symbol_conf.kallsyms_name,
|
|
|
|
"file", "kallsyms pathname"),
|
2015-11-13 03:50:13 +08:00
|
|
|
OPT_BOOLEAN('f', "force", &symbol_conf.force, "don't complain, do it"),
|
2009-11-24 22:05:15 +08:00
|
|
|
OPT_BOOLEAN('m', "modules", &symbol_conf.use_modules,
|
2009-07-02 14:09:46 +08:00
|
|
|
"load module symbols - WARNING: use only with -k and LIVE kernel"),
|
2009-12-16 06:04:42 +08:00
|
|
|
OPT_BOOLEAN('n', "show-nr-samples", &symbol_conf.show_nr_samples,
|
2009-07-11 23:18:37 +08:00
|
|
|
"Show a column with the number of samples"),
|
2011-11-17 22:19:04 +08:00
|
|
|
OPT_BOOLEAN('T', "threads", &report.show_threads,
|
2009-08-07 19:55:24 +08:00
|
|
|
"Show per-thread event counters"),
|
2011-11-17 22:19:04 +08:00
|
|
|
OPT_STRING(0, "pretty", &report.pretty_printing_style, "key",
|
2009-08-10 21:26:32 +08:00
|
|
|
"pretty printing style key: normal raw"),
|
2011-11-17 22:19:04 +08:00
|
|
|
OPT_BOOLEAN(0, "tui", &report.use_tui, "Use the TUI interface"),
|
2012-03-20 02:13:29 +08:00
|
|
|
OPT_BOOLEAN(0, "gtk", &report.use_gtk, "Use the GTK2 interface"),
|
2011-11-17 22:19:04 +08:00
|
|
|
OPT_BOOLEAN(0, "stdio", &report.use_stdio,
|
|
|
|
"Use the stdio interface"),
|
2013-12-09 18:02:49 +08:00
|
|
|
OPT_BOOLEAN(0, "header", &report.header, "Show data header."),
|
|
|
|
OPT_BOOLEAN(0, "header-only", &report.header_only,
|
|
|
|
"Show only data header."),
|
2009-05-28 16:52:00 +08:00
|
|
|
OPT_STRING('s', "sort", &sort_order, "key[,key2...]",
|
2014-03-04 08:06:42 +08:00
|
|
|
"sort by key(s): pid, comm, dso, symbol, parent, cpu, srcline, ..."
|
|
|
|
" Please refer the man page for the complete list."),
|
2014-03-04 09:46:34 +08:00
|
|
|
OPT_STRING('F', "fields", &field_order, "key[,keys...]",
|
|
|
|
"output field(s): overhead, period, sample plus all of sort keys"),
|
2015-10-24 23:49:25 +08:00
|
|
|
OPT_BOOLEAN(0, "show-cpu-utilization", &symbol_conf.show_cpu_utilization,
|
2010-04-19 13:32:50 +08:00
|
|
|
"Show sample percentage for different cpu modes"),
|
2015-10-24 23:49:25 +08:00
|
|
|
OPT_BOOLEAN_FLAG(0, "showcpuutilization", &symbol_conf.show_cpu_utilization,
|
|
|
|
"Show sample percentage for different cpu modes", PARSE_OPT_HIDDEN),
|
2009-06-18 13:01:03 +08:00
|
|
|
OPT_STRING('p', "parent", &parent_pattern, "regex",
|
|
|
|
"regex filter to identify parent, see: '--sort parent'"),
|
2009-12-16 06:04:42 +08:00
|
|
|
OPT_BOOLEAN('x', "exclude-other", &symbol_conf.exclude_other,
|
2009-06-18 20:32:19 +08:00
|
|
|
"Only display entries with parent-match"),
|
2016-04-18 22:54:31 +08:00
|
|
|
OPT_CALLBACK_DEFAULT('g', "call-graph", &callchain_param,
|
2015-11-09 13:45:41 +08:00
|
|
|
"print_type,threshold[,print_limit],order,sort_key[,branch],value",
|
2015-10-22 14:28:48 +08:00
|
|
|
report_callchain_help, &report_parse_callchain_opt,
|
|
|
|
callchain_default_opt),
|
2013-10-30 16:05:55 +08:00
|
|
|
OPT_BOOLEAN(0, "children", &symbol_conf.cumulate_callchain,
|
|
|
|
"Accumulate callchains of children and show total overhead as well"),
|
perf report: Add --max-stack option to limit callchain stack scan
When callgraph data was included in the perf data file, it may take a
long time to scan all those data and merge them together especially if
the stored callchains are long and the perf data file itself is large,
like a Gbyte or so.
The callchain stack is currently limited to PERF_MAX_STACK_DEPTH (127).
This is a large value. Usually the callgraph data that developers are
most interested in are the first few levels, the rests are usually not
looked at.
This patch adds a new --max-stack option to perf-report to limit the
depth of callchain stack data to look at to reduce the time it takes for
perf-report to finish its processing. It trades the presence of trailing
stack information with faster speed.
The following table shows the elapsed time of doing perf-report on a
perf.data file of size 985,531,828 bytes.
--max_stack Elapsed Time Output data size
----------- ------------ ----------------
not set 88.0s 124,422,651
64 87.5s 116,303,213
32 87.2s 112,023,804
16 86.6s 94,326,380
8 59.9s 33,697,248
4 40.7s 10,116,637
-g none 27.1s 2,555,810
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1382107129-2010-4-git-send-email-Waiman.Long@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-18 22:38:48 +08:00
|
|
|
OPT_INTEGER(0, "max-stack", &report.max_stack,
|
|
|
|
"Set the maximum stack depth when parsing the callchain, "
|
|
|
|
"anything beyond the specified depth will be ignored. "
|
2016-04-27 21:16:24 +08:00
|
|
|
"Default: kernel.perf_event_max_stack or " __stringify(PERF_MAX_STACK_DEPTH)),
|
2011-11-17 22:19:04 +08:00
|
|
|
OPT_BOOLEAN('G', "inverted", &report.inverted_callchain,
|
|
|
|
"alias for inverted call graph"),
|
2012-12-07 13:48:05 +08:00
|
|
|
OPT_CALLBACK(0, "ignore-callees", NULL, "regex",
|
|
|
|
"ignore callees of these functions in call graphs",
|
|
|
|
report_parse_ignore_callees_opt),
|
2009-12-16 06:04:40 +08:00
|
|
|
OPT_STRING('d', "dsos", &symbol_conf.dso_list_str, "dso[,dso...]",
|
2009-07-01 06:01:20 +08:00
|
|
|
"only consider symbols in these dsos"),
|
2011-11-14 02:30:08 +08:00
|
|
|
OPT_STRING('c', "comms", &symbol_conf.comm_list_str, "comm[,comm...]",
|
2009-07-01 06:01:21 +08:00
|
|
|
"only consider symbols in these comms"),
|
2015-03-24 23:52:41 +08:00
|
|
|
OPT_STRING(0, "pid", &symbol_conf.pid_list_str, "pid[,pid...]",
|
|
|
|
"only consider symbols in these pids"),
|
|
|
|
OPT_STRING(0, "tid", &symbol_conf.tid_list_str, "tid[,tid...]",
|
|
|
|
"only consider symbols in these tids"),
|
2009-12-16 06:04:40 +08:00
|
|
|
OPT_STRING('S', "symbols", &symbol_conf.sym_list_str, "symbol[,symbol...]",
|
2009-07-01 06:01:22 +08:00
|
|
|
"only consider these symbols"),
|
2012-03-16 16:50:54 +08:00
|
|
|
OPT_STRING(0, "symbol-filter", &report.symbol_filter_str, "filter",
|
|
|
|
"only show symbols that (partially) match with this filter"),
|
2009-12-16 06:04:40 +08:00
|
|
|
OPT_STRING('w', "column-widths", &symbol_conf.col_width_list_str,
|
2009-07-11 09:47:28 +08:00
|
|
|
"width[,width...]",
|
|
|
|
"don't try to adjust column width, use these fixed values"),
|
2015-03-13 20:51:54 +08:00
|
|
|
OPT_STRING_NOEMPTY('t', "field-separator", &symbol_conf.field_sep, "separator",
|
2009-07-11 09:47:28 +08:00
|
|
|
"separator for columns, no spaces will be added between "
|
|
|
|
"columns '.' is reserved."),
|
2015-11-26 15:08:20 +08:00
|
|
|
OPT_BOOLEAN('U', "hide-unresolved", &symbol_conf.hide_unresolved,
|
2009-12-29 08:48:34 +08:00
|
|
|
"Only display entries resolved to a symbol"),
|
2016-05-19 19:47:37 +08:00
|
|
|
OPT_CALLBACK(0, "symfs", NULL, "directory",
|
|
|
|
"Look for files with symbols relative to this directory",
|
|
|
|
symbol__config_symfs),
|
2011-11-14 02:30:08 +08:00
|
|
|
OPT_STRING('C', "cpu", &report.cpu_list, "cpu",
|
2011-11-17 22:19:04 +08:00
|
|
|
"list of cpus to profile"),
|
|
|
|
OPT_BOOLEAN('I', "show-info", &report.show_full_info,
|
perf tools: Make perf.data more self-descriptive (v8)
The goal of this patch is to include more information about the host
environment into the perf.data so it is more self-descriptive. Overtime,
profiles are captured on various machines and it becomes hard to track
what was recorded, on what machine and when.
This patch provides a way to solve this by extending the perf.data file
with basic information about the host machine. To add those extensions,
we leverage the feature bits capabilities of the perf.data format. The
change is backward compatible with existing perf.data files.
We define the following useful new extensions:
- HEADER_HOSTNAME: the hostname
- HEADER_OSRELEASE: the kernel release number
- HEADER_ARCH: the hw architecture
- HEADER_CPUDESC: generic CPU description
- HEADER_NRCPUS: number of online/avail cpus
- HEADER_CMDLINE: perf command line
- HEADER_VERSION: perf version
- HEADER_TOPOLOGY: cpu topology
- HEADER_EVENT_DESC: full event description (attrs)
- HEADER_CPUID: easy-to-parse low level CPU identication
The small granularity for the entries is to make it easier to extend
without breaking backward compatiblity. Many entries are provided as
ASCII strings.
Perf report/script have been modified to print the basic information as
easy-to-parse ASCII strings. Extended information about CPU and NUMA
topology may be requested with the -I option.
Thanks to David Ahern for reviewing and testing the many versions of
this patch.
$ perf report --stdio
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# ========
#
...
$ perf report --stdio -I
# ========
# captured on : Mon Sep 26 15:22:14 2011
# hostname : quad
# os release : 3.1.0-rc4-tip
# perf version : 3.1.0-rc4
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
# cpuid : GenuineIntel,6,15,11
# total memory : 8105360 kB
# cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
# sibling cores : 0-3
# sibling threads : 0
# sibling threads : 1
# sibling threads : 2
# sibling threads : 3
# node0 meminfo : total = 8320608 kB, free = 7571024 kB
# node0 cpu list : 0-3
# ========
#
...
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20110930134040.GA5575@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
[ committer notes: Use --show-info in the tools as was in the docs, rename
perf_header_fprintf_info to perf_file_section__fprintf_info, fixup
conflict with f69b64f7 "perf: Support setting the disassembler style" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-30 21:40:40 +08:00
|
|
|
"Display extended information about perf.data file"),
|
2011-10-06 23:48:31 +08:00
|
|
|
OPT_BOOLEAN(0, "source", &symbol_conf.annotate_src,
|
|
|
|
"Interleave source code with assembly code (default)"),
|
|
|
|
OPT_BOOLEAN(0, "asm-raw", &symbol_conf.annotate_asm_raw,
|
|
|
|
"Display raw encoding of assembly instructions (default)"),
|
2011-09-16 05:31:41 +08:00
|
|
|
OPT_STRING('M', "disassembler-style", &disassembler_style, "disassembler style",
|
|
|
|
"Specify disassembler style (e.g. -M intel for intel syntax)"),
|
2011-10-06 03:10:06 +08:00
|
|
|
OPT_BOOLEAN(0, "show-total-period", &symbol_conf.show_total_period,
|
|
|
|
"Show a column with the sum of periods"),
|
2018-02-09 17:27:34 +08:00
|
|
|
OPT_BOOLEAN_SET(0, "group", &symbol_conf.event_group, &group_set,
|
2013-01-22 17:09:45 +08:00
|
|
|
"Show event group information together"),
|
2013-04-01 19:35:20 +08:00
|
|
|
OPT_CALLBACK_NOOPT('b', "branch-stack", &branch_mode, "",
|
2014-11-13 10:05:22 +08:00
|
|
|
"use branch records for per branch histogram filling",
|
|
|
|
parse_branch_mode),
|
|
|
|
OPT_BOOLEAN(0, "branch-history", &branch_call_mode,
|
|
|
|
"add last branch records to call history"),
|
2012-09-04 18:32:30 +08:00
|
|
|
OPT_STRING(0, "objdump", &objdump_path, "path",
|
|
|
|
"objdump binary to use for disassembly and annotations"),
|
2013-03-25 17:18:18 +08:00
|
|
|
OPT_BOOLEAN(0, "demangle", &symbol_conf.demangle,
|
|
|
|
"Disable symbol demangling"),
|
2014-09-13 12:15:05 +08:00
|
|
|
OPT_BOOLEAN(0, "demangle-kernel", &symbol_conf.demangle_kernel,
|
|
|
|
"Enable kernel symbol demangling"),
|
2013-01-24 23:10:36 +08:00
|
|
|
OPT_BOOLEAN(0, "mem-mode", &report.mem_mode, "mem access profile"),
|
2013-05-14 10:09:04 +08:00
|
|
|
OPT_CALLBACK(0, "percent-limit", &report, "percent",
|
|
|
|
"Don't show entries under that percent", parse_percent_limit),
|
2014-01-14 10:52:48 +08:00
|
|
|
OPT_CALLBACK(0, "percentage", NULL, "relative|absolute",
|
2014-02-07 11:06:07 +08:00
|
|
|
"how to display percentage of filtered entries", parse_filter_percentage),
|
2015-04-25 03:29:45 +08:00
|
|
|
OPT_CALLBACK_OPTARG(0, "itrace", &itrace_synth_opts, NULL, "opts",
|
|
|
|
"Instruction Tracing options",
|
|
|
|
itrace_parse_synth_opts),
|
2015-08-08 06:24:05 +08:00
|
|
|
OPT_BOOLEAN(0, "full-source-path", &srcline_full_filename,
|
|
|
|
"Show full source file name path for source lines"),
|
2015-08-11 18:30:49 +08:00
|
|
|
OPT_BOOLEAN(0, "show-ref-call-graph", &symbol_conf.show_ref_callgraph,
|
|
|
|
"Show callgraph from reference event"),
|
2015-09-04 22:45:44 +08:00
|
|
|
OPT_INTEGER(0, "socket-filter", &report.socket_filter,
|
|
|
|
"only show processor socket that match with this filter"),
|
2015-12-23 01:07:05 +08:00
|
|
|
OPT_BOOLEAN(0, "raw-trace", &symbol_conf.raw_trace,
|
|
|
|
"Show raw trace event output (do not use print fmt or plugins)"),
|
2016-02-24 23:13:48 +08:00
|
|
|
OPT_BOOLEAN(0, "hierarchy", &symbol_conf.report_hierarchy,
|
|
|
|
"Show entries in a hierarchy"),
|
2016-07-05 22:14:38 +08:00
|
|
|
OPT_CALLBACK_DEFAULT(0, "stdio-color", NULL, "mode",
|
|
|
|
"'always' (default), 'never' or 'auto' only applicable to --stdio mode",
|
|
|
|
stdio__config_color, "always"),
|
perf report: Add option to specify time window of interest
Add option to allow user to control analysis window. e.g., collect data
for time window and analyze a segment of interest within that window.
Committer notes:
Testing it:
Using the perf.data file captured via 'perf kmem record':
# perf report --header-only
# ========
# captured on: Tue Nov 29 16:01:53 2016
# hostname : jouet
# os release : 4.8.8-300.fc25.x86_64
# perf version : 4.9.rc6.g5a6aca
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz
# cpuid : GenuineIntel,6,61,4
# total memory : 20254660 kB
# cmdline : /home/acme/bin/perf kmem record usleep 1
# event : name = kmem:kmalloc, , id = { 931980, 931981, 931982, 931983 }, type = 2, size = 112, config = 0x1b9, { sample_period, sample_freq } = 1, sample_typ
# event : name = kmem:kmalloc_node, , id = { 931984, 931985, 931986, 931987 }, type = 2, size = 112, config = 0x1b7, { sample_period, sample_freq } = 1, sampl
# event : name = kmem:kfree, , id = { 931988, 931989, 931990, 931991 }, type = 2, size = 112, config = 0x1b5, { sample_period, sample_freq } = 1, sample_type
# event : name = kmem:kmem_cache_alloc, , id = { 931992, 931993, 931994, 931995 }, type = 2, size = 112, config = 0x1b8, { sample_period, sample_freq } = 1, s
# event : name = kmem:kmem_cache_alloc_node, , id = { 931996, 931997, 931998, 931999 }, type = 2, size = 112, config = 0x1b6, { sample_period, sample_freq } =
# event : name = kmem:kmem_cache_free, , id = { 932000, 932001, 932002, 932003 }, type = 2, size = 112, config = 0x1b4, { sample_period, sample_freq } = 1, sa
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# pmu mappings: cpu = 4, intel_pt = 7, intel_bts = 6, uncore_arb = 13, cstate_pkg = 15, breakpoint = 5, uncore_cbox_1 = 12, power = 9, software = 1, uncore_im
# HEADER_CACHE info available, use -I to display
# missing features: HEADER_BRANCH_STACK HEADER_GROUP_DESC HEADER_AUXTRACE HEADER_STAT
# ========
#
# # Looking at just the histogram entries for the first event:
#
# perf report | head -33
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 40 of event 'kmem:kmalloc'
# Event count (approx.): 40
#
# Overhead Trace output
# ........ ...............................................................................................................
#
37.50% call_site=ffffffffb91ad3c7 ptr=0xffff88895fc05000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL
10.00% call_site=ffffffffb9258416 ptr=0xffff888a1dc61f00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO
7.50% call_site=ffffffffb9258416 ptr=0xffff888a2640ac00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO
2.50% call_site=ffffffffb92759ba ptr=0xffff888a26776000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb9276864 ptr=0xffff8886f6b82600 bytes_req=136 bytes_alloc=192 gfp_flags=GFP_KERNEL|__GFP_ZERO
2.50% call_site=ffffffffb9276903 ptr=0xffff888aefcf0460 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c98a00 bytes_req=392 bytes_alloc=512 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c9ba00 bytes_req=504 bytes_alloc=512 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad301 ptr=0xffff888a31747600 bytes_req=128 bytes_alloc=128 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad511 ptr=0xffff888a9d26a2a0 bytes_req=28 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c11a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c12c0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1540 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c16e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1c20 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff888a9d26a2a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931240 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931980 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931a00 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
#
# # And then limiting using the example for 'perf kmem stat --time' used
# # in the previous changeset committer note we see that there were no
# # kmem:kmalloc in that last part of the file, but there were some
# # kmem:kmem_cache_alloc ones:
#
# perf report --time 20119.782088, --stdio
#
# Total Lost Samples: 0
#
# Samples: 0 of event 'kmem:kmalloc'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
# Samples: 0 of event 'kmem:kmalloc_node'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
# Samples: 0 of event 'kmem:kfree'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
# Samples: 8 of event 'kmem:kmem_cache_alloc'
# Event count (approx.): 8
#
# Overhead Trace output
# ........ ..................................................................................................................
#
75.00% call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO
12.50% call_site=ffffffffb90ad33a ptr=0xffff8889f071f6e0 bytes_req=160 bytes_alloc=160 gfp_flags=GFP_ATOMIC|__GFP_NOTRACK
12.50% call_site=ffffffffb9287cc1 ptr=0xffff8889b12722d8 bytes_req=104 bytes_alloc=104 gfp_flags=GFP_NOFS|__GFP_ZERO
#
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-7-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:46 +08:00
|
|
|
OPT_STRING(0, "time", &report.time_str, "str",
|
|
|
|
"Time span of interest (start,stop)"),
|
2017-03-26 04:34:27 +08:00
|
|
|
OPT_BOOLEAN(0, "inline", &symbol_conf.inline_name,
|
|
|
|
"Show inline function"),
|
2009-05-26 15:17:18 +08:00
|
|
|
OPT_END()
|
2011-11-25 18:19:45 +08:00
|
|
|
};
|
2017-01-24 05:07:59 +08:00
|
|
|
struct perf_data data = {
|
2013-10-15 22:27:32 +08:00
|
|
|
.mode = PERF_DATA_MODE_READ,
|
|
|
|
};
|
2014-10-10 03:16:00 +08:00
|
|
|
int ret = hists__init();
|
|
|
|
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
2009-05-26 15:17:18 +08:00
|
|
|
|
2017-01-25 00:44:10 +08:00
|
|
|
ret = perf_config(report__config, &report);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
2013-01-22 17:09:46 +08:00
|
|
|
|
2009-12-16 06:04:40 +08:00
|
|
|
argc = parse_options(argc, argv, options, report_usage, 0);
|
2015-12-10 11:00:56 +08:00
|
|
|
if (argc) {
|
|
|
|
/*
|
|
|
|
* Special case: if there's an argument left then assume that
|
|
|
|
* it's a symbol filter:
|
|
|
|
*/
|
|
|
|
if (argc > 1)
|
|
|
|
usage_with_options(report_usage, options);
|
|
|
|
|
|
|
|
report.symbol_filter_str = argv[0];
|
|
|
|
}
|
2009-12-16 06:04:40 +08:00
|
|
|
|
2018-01-10 02:25:03 +08:00
|
|
|
if (report.mmaps_mode)
|
|
|
|
report.tasks_mode = true;
|
|
|
|
|
2017-02-17 16:17:39 +08:00
|
|
|
if (quiet)
|
|
|
|
perf_quiet_option();
|
|
|
|
|
2015-06-19 16:57:33 +08:00
|
|
|
if (symbol_conf.vmlinux_name &&
|
|
|
|
access(symbol_conf.vmlinux_name, R_OK)) {
|
|
|
|
pr_err("Invalid file: %s\n", symbol_conf.vmlinux_name);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
if (symbol_conf.kallsyms_name &&
|
|
|
|
access(symbol_conf.kallsyms_name, R_OK)) {
|
|
|
|
pr_err("Invalid file: %s\n", symbol_conf.kallsyms_name);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2011-11-17 22:19:04 +08:00
|
|
|
if (report.inverted_callchain)
|
2011-06-07 23:49:46 +08:00
|
|
|
callchain_param.order = ORDER_CALLER;
|
2015-10-22 15:45:46 +08:00
|
|
|
if (symbol_conf.cumulate_callchain && !callchain_param.order_set)
|
|
|
|
callchain_param.order = ORDER_CALLER;
|
2011-06-07 23:49:46 +08:00
|
|
|
|
2015-09-25 21:15:46 +08:00
|
|
|
if (itrace_synth_opts.callchain &&
|
|
|
|
(int)itrace_synth_opts.callchain_sz > report.max_stack)
|
|
|
|
report.max_stack = itrace_synth_opts.callchain_sz;
|
|
|
|
|
2012-10-30 11:56:02 +08:00
|
|
|
if (!input_name || !strlen(input_name)) {
|
2011-12-07 17:02:54 +08:00
|
|
|
if (!fstat(STDIN_FILENO, &st) && S_ISFIFO(st.st_mode))
|
2012-10-30 11:56:02 +08:00
|
|
|
input_name = "-";
|
2011-12-07 17:02:54 +08:00
|
|
|
else
|
2012-10-30 11:56:02 +08:00
|
|
|
input_name = "perf.data";
|
2011-12-07 17:02:54 +08:00
|
|
|
}
|
2013-02-03 14:38:21 +08:00
|
|
|
|
2017-01-24 05:25:41 +08:00
|
|
|
data.file.path = input_name;
|
|
|
|
data.force = symbol_conf.force;
|
2013-10-15 22:27:32 +08:00
|
|
|
|
2013-02-03 14:38:21 +08:00
|
|
|
repeat:
|
2017-01-24 05:07:59 +08:00
|
|
|
session = perf_session__new(&data, false, &report.tool);
|
2012-03-09 06:47:47 +08:00
|
|
|
if (session == NULL)
|
2014-09-24 09:33:37 +08:00
|
|
|
return -1;
|
2012-03-09 06:47:47 +08:00
|
|
|
|
2014-06-05 17:00:20 +08:00
|
|
|
if (report.queue_size) {
|
|
|
|
ordered_events__set_alloc_size(&session->ordered_events,
|
|
|
|
report.queue_size);
|
|
|
|
}
|
|
|
|
|
2015-04-25 03:29:45 +08:00
|
|
|
session->itrace_synth_opts = &itrace_synth_opts;
|
|
|
|
|
2012-03-09 06:47:47 +08:00
|
|
|
report.session = session;
|
|
|
|
|
|
|
|
has_br_stack = perf_header__has_feat(&session->header,
|
|
|
|
HEADER_BRANCH_STACK);
|
2011-12-07 17:02:54 +08:00
|
|
|
|
2018-02-09 17:27:34 +08:00
|
|
|
if (group_set && !session->evlist->nr_groups)
|
|
|
|
perf_evlist__set_leader(session->evlist);
|
|
|
|
|
2015-09-25 21:15:41 +08:00
|
|
|
if (itrace_synth_opts.last_branch)
|
|
|
|
has_br_stack = true;
|
|
|
|
|
2016-10-31 09:19:50 +08:00
|
|
|
if (has_br_stack && branch_call_mode)
|
|
|
|
symbol_conf.show_branchflag_count = true;
|
|
|
|
|
2017-07-18 20:13:14 +08:00
|
|
|
memset(&report.brtype_stat, 0, sizeof(struct branch_type_stat));
|
|
|
|
|
2014-11-13 10:05:22 +08:00
|
|
|
/*
|
|
|
|
* Branch mode is a tristate:
|
|
|
|
* -1 means default, so decide based on the file having branch data.
|
|
|
|
* 0/1 means the user chose a mode.
|
|
|
|
*/
|
|
|
|
if (((branch_mode == -1 && has_br_stack) || branch_mode == 1) &&
|
2015-02-15 10:33:37 +08:00
|
|
|
!branch_call_mode) {
|
2013-04-01 19:35:20 +08:00
|
|
|
sort__mode = SORT_MODE__BRANCH;
|
2013-10-30 16:05:55 +08:00
|
|
|
symbol_conf.cumulate_callchain = false;
|
|
|
|
}
|
2014-11-13 10:05:22 +08:00
|
|
|
if (branch_call_mode) {
|
2014-11-18 09:58:54 +08:00
|
|
|
callchain_param.key = CCKEY_ADDRESS;
|
2014-11-13 10:05:22 +08:00
|
|
|
callchain_param.branch_callstack = 1;
|
|
|
|
symbol_conf.use_callchain = true;
|
|
|
|
callchain_register_param(&callchain_param);
|
|
|
|
if (sort_order == NULL)
|
|
|
|
sort_order = "srcline,symbol,dso";
|
|
|
|
}
|
2012-03-09 06:47:47 +08:00
|
|
|
|
2013-01-24 23:10:36 +08:00
|
|
|
if (report.mem_mode) {
|
2013-04-01 19:35:20 +08:00
|
|
|
if (sort__mode == SORT_MODE__BRANCH) {
|
2013-12-20 13:11:12 +08:00
|
|
|
pr_err("branch and mem mode incompatible\n");
|
2013-01-24 23:10:36 +08:00
|
|
|
goto error;
|
|
|
|
}
|
2013-04-03 20:26:11 +08:00
|
|
|
sort__mode = SORT_MODE__MEMORY;
|
2013-10-30 16:05:55 +08:00
|
|
|
symbol_conf.cumulate_callchain = false;
|
2013-01-24 23:10:36 +08:00
|
|
|
}
|
2012-03-09 06:47:48 +08:00
|
|
|
|
2016-02-24 23:13:48 +08:00
|
|
|
if (symbol_conf.report_hierarchy) {
|
|
|
|
/* disable incompatible options */
|
|
|
|
symbol_conf.cumulate_callchain = false;
|
|
|
|
|
|
|
|
if (field_order) {
|
|
|
|
pr_err("Error: --hierarchy and --fields options cannot be used together\n");
|
|
|
|
parse_options_usage(report_usage, options, "F", 1);
|
|
|
|
parse_options_usage(NULL, options, "hierarchy", 0);
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
|
2016-05-03 19:54:42 +08:00
|
|
|
perf_hpp_list.need_collapse = true;
|
2016-02-24 23:13:48 +08:00
|
|
|
}
|
|
|
|
|
2017-12-05 00:02:44 +08:00
|
|
|
if (report.use_stdio)
|
|
|
|
use_browser = 0;
|
|
|
|
else if (report.use_tui)
|
|
|
|
use_browser = 1;
|
|
|
|
else if (report.use_gtk)
|
|
|
|
use_browser = 2;
|
|
|
|
|
2015-05-09 23:19:43 +08:00
|
|
|
/* Force tty output for header output and per-thread stat. */
|
|
|
|
if (report.header || report.header_only || report.show_threads)
|
2013-12-09 18:02:49 +08:00
|
|
|
use_browser = 0;
|
2017-07-18 12:25:47 +08:00
|
|
|
if (report.header || report.header_only)
|
|
|
|
report.tool.show_feat_hdr = SHOW_FEAT_HEADER;
|
|
|
|
if (report.show_full_info)
|
|
|
|
report.tool.show_feat_hdr = SHOW_FEAT_HEADER_FULL_INFO;
|
2018-01-08 00:03:56 +08:00
|
|
|
if (report.stats_mode || report.tasks_mode)
|
2018-01-08 00:03:55 +08:00
|
|
|
use_browser = 0;
|
2018-01-08 00:03:56 +08:00
|
|
|
if (report.stats_mode && report.tasks_mode) {
|
2018-01-10 02:25:03 +08:00
|
|
|
pr_err("Error: --tasks and --mmaps can't be used together with --stats\n");
|
2018-01-08 00:03:56 +08:00
|
|
|
goto error;
|
|
|
|
}
|
2013-12-09 18:02:49 +08:00
|
|
|
|
2013-11-01 15:33:12 +08:00
|
|
|
if (strcmp(input_name, "-") != 0)
|
|
|
|
setup_browser(true);
|
2014-04-16 10:04:51 +08:00
|
|
|
else
|
2013-11-01 15:33:12 +08:00
|
|
|
use_browser = 0;
|
|
|
|
|
2016-01-18 17:24:06 +08:00
|
|
|
if (setup_sorting(session->evlist) < 0) {
|
|
|
|
if (sort_order)
|
|
|
|
parse_options_usage(report_usage, options, "s", 1);
|
|
|
|
if (field_order)
|
|
|
|
parse_options_usage(sort_order ? NULL : report_usage,
|
|
|
|
options, "F", 1);
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
|
2017-02-17 16:17:39 +08:00
|
|
|
if ((report.header || report.header_only) && !quiet) {
|
2013-12-09 18:02:49 +08:00
|
|
|
perf_session__fprintf_info(session, stdout,
|
|
|
|
report.show_full_info);
|
2015-06-30 16:15:24 +08:00
|
|
|
if (report.header_only) {
|
|
|
|
ret = 0;
|
|
|
|
goto error;
|
|
|
|
}
|
2018-01-08 00:03:56 +08:00
|
|
|
} else if (use_browser == 0 && !quiet &&
|
|
|
|
!report.stats_mode && !report.tasks_mode) {
|
2013-12-09 18:02:49 +08:00
|
|
|
fputs("# To display the perf.data header info, please use --header/--header-only options.\n#\n",
|
|
|
|
stdout);
|
|
|
|
}
|
|
|
|
|
2010-05-12 10:18:06 +08:00
|
|
|
/*
|
2013-03-28 22:34:10 +08:00
|
|
|
* Only in the TUI browser we are doing integrated annotation,
|
2010-05-12 10:18:06 +08:00
|
|
|
* so don't allocate extra space that won't be used in the stdio
|
|
|
|
* implementation.
|
|
|
|
*/
|
2014-03-18 14:32:26 +08:00
|
|
|
if (ui__has_annotation()) {
|
2016-08-26 03:09:21 +08:00
|
|
|
ret = symbol__annotation_init();
|
|
|
|
if (ret < 0)
|
|
|
|
goto error;
|
2010-08-06 06:28:27 +08:00
|
|
|
/*
|
|
|
|
* For searching by name on the "Browse map details".
|
|
|
|
* providing it only in verbose mode not to bloat too
|
|
|
|
* much struct symbol.
|
|
|
|
*/
|
2017-02-17 16:17:38 +08:00
|
|
|
if (verbose > 0) {
|
2010-08-06 06:28:27 +08:00
|
|
|
/*
|
|
|
|
* XXX: Need to provide a less kludgy way to ask for
|
|
|
|
* more space per symbol, the u32 is for the index on
|
|
|
|
* the ui browser.
|
|
|
|
* See symbol__browser_index.
|
|
|
|
*/
|
|
|
|
symbol_conf.priv_size += sizeof(u32);
|
|
|
|
symbol_conf.sort_by_name = true;
|
|
|
|
}
|
|
|
|
}
|
2009-12-16 06:04:40 +08:00
|
|
|
|
2014-08-12 14:40:45 +08:00
|
|
|
if (symbol__init(&session->header.env) < 0)
|
2012-03-09 06:47:47 +08:00
|
|
|
goto error;
|
2009-05-26 15:17:18 +08:00
|
|
|
|
perf report: Remove the time slices number limitation
Previously it was only allowed to use at most 10 time slices in 'perf
report --time'.
This patch removes this limitation.
For example, following command line is OK (12 time slices)
perf report --stdio --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-8-git-send-email-yao.jin@linux.intel.com
[ No need to check for NULL to call free, use zfree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-10 23:00:32 +08:00
|
|
|
report.ptime_range = perf_time__range_alloc(report.time_str,
|
|
|
|
&report.range_size);
|
|
|
|
if (!report.ptime_range) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
|
2017-12-08 21:13:45 +08:00
|
|
|
if (perf_time__parse_str(report.ptime_range, report.time_str) != 0) {
|
|
|
|
if (session->evlist->first_sample_time == 0 &&
|
|
|
|
session->evlist->last_sample_time == 0) {
|
2018-01-10 23:00:26 +08:00
|
|
|
pr_err("HINT: no first/last sample time found in perf data.\n"
|
|
|
|
"Please use latest perf binary to execute 'perf record'\n"
|
|
|
|
"(if '--buildid-all' is enabled, please set '--timestamp-boundary').\n");
|
perf report: Remove the time slices number limitation
Previously it was only allowed to use at most 10 time slices in 'perf
report --time'.
This patch removes this limitation.
For example, following command line is OK (12 time slices)
perf report --stdio --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-8-git-send-email-yao.jin@linux.intel.com
[ No need to check for NULL to call free, use zfree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-10 23:00:32 +08:00
|
|
|
ret = -EINVAL;
|
|
|
|
goto error;
|
2017-12-08 21:13:45 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
report.range_num = perf_time__percent_parse_str(
|
perf report: Remove the time slices number limitation
Previously it was only allowed to use at most 10 time slices in 'perf
report --time'.
This patch removes this limitation.
For example, following command line is OK (12 time slices)
perf report --stdio --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-8-git-send-email-yao.jin@linux.intel.com
[ No need to check for NULL to call free, use zfree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-10 23:00:32 +08:00
|
|
|
report.ptime_range, report.range_size,
|
2017-12-08 21:13:45 +08:00
|
|
|
report.time_str,
|
|
|
|
session->evlist->first_sample_time,
|
|
|
|
session->evlist->last_sample_time);
|
|
|
|
|
|
|
|
if (report.range_num < 0) {
|
|
|
|
pr_err("Invalid time string\n");
|
perf report: Remove the time slices number limitation
Previously it was only allowed to use at most 10 time slices in 'perf
report --time'.
This patch removes this limitation.
For example, following command line is OK (12 time slices)
perf report --stdio --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-8-git-send-email-yao.jin@linux.intel.com
[ No need to check for NULL to call free, use zfree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-10 23:00:32 +08:00
|
|
|
ret = -EINVAL;
|
|
|
|
goto error;
|
2017-12-08 21:13:45 +08:00
|
|
|
}
|
|
|
|
} else {
|
|
|
|
report.range_num = 1;
|
perf report: Add option to specify time window of interest
Add option to allow user to control analysis window. e.g., collect data
for time window and analyze a segment of interest within that window.
Committer notes:
Testing it:
Using the perf.data file captured via 'perf kmem record':
# perf report --header-only
# ========
# captured on: Tue Nov 29 16:01:53 2016
# hostname : jouet
# os release : 4.8.8-300.fc25.x86_64
# perf version : 4.9.rc6.g5a6aca
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz
# cpuid : GenuineIntel,6,61,4
# total memory : 20254660 kB
# cmdline : /home/acme/bin/perf kmem record usleep 1
# event : name = kmem:kmalloc, , id = { 931980, 931981, 931982, 931983 }, type = 2, size = 112, config = 0x1b9, { sample_period, sample_freq } = 1, sample_typ
# event : name = kmem:kmalloc_node, , id = { 931984, 931985, 931986, 931987 }, type = 2, size = 112, config = 0x1b7, { sample_period, sample_freq } = 1, sampl
# event : name = kmem:kfree, , id = { 931988, 931989, 931990, 931991 }, type = 2, size = 112, config = 0x1b5, { sample_period, sample_freq } = 1, sample_type
# event : name = kmem:kmem_cache_alloc, , id = { 931992, 931993, 931994, 931995 }, type = 2, size = 112, config = 0x1b8, { sample_period, sample_freq } = 1, s
# event : name = kmem:kmem_cache_alloc_node, , id = { 931996, 931997, 931998, 931999 }, type = 2, size = 112, config = 0x1b6, { sample_period, sample_freq } =
# event : name = kmem:kmem_cache_free, , id = { 932000, 932001, 932002, 932003 }, type = 2, size = 112, config = 0x1b4, { sample_period, sample_freq } = 1, sa
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# pmu mappings: cpu = 4, intel_pt = 7, intel_bts = 6, uncore_arb = 13, cstate_pkg = 15, breakpoint = 5, uncore_cbox_1 = 12, power = 9, software = 1, uncore_im
# HEADER_CACHE info available, use -I to display
# missing features: HEADER_BRANCH_STACK HEADER_GROUP_DESC HEADER_AUXTRACE HEADER_STAT
# ========
#
# # Looking at just the histogram entries for the first event:
#
# perf report | head -33
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 40 of event 'kmem:kmalloc'
# Event count (approx.): 40
#
# Overhead Trace output
# ........ ...............................................................................................................
#
37.50% call_site=ffffffffb91ad3c7 ptr=0xffff88895fc05000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL
10.00% call_site=ffffffffb9258416 ptr=0xffff888a1dc61f00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO
7.50% call_site=ffffffffb9258416 ptr=0xffff888a2640ac00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO
2.50% call_site=ffffffffb92759ba ptr=0xffff888a26776000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb9276864 ptr=0xffff8886f6b82600 bytes_req=136 bytes_alloc=192 gfp_flags=GFP_KERNEL|__GFP_ZERO
2.50% call_site=ffffffffb9276903 ptr=0xffff888aefcf0460 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c98a00 bytes_req=392 bytes_alloc=512 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c9ba00 bytes_req=504 bytes_alloc=512 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad301 ptr=0xffff888a31747600 bytes_req=128 bytes_alloc=128 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad511 ptr=0xffff888a9d26a2a0 bytes_req=28 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c11a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c12c0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1540 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c16e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1c20 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff888a9d26a2a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931240 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931980 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931a00 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
#
# # And then limiting using the example for 'perf kmem stat --time' used
# # in the previous changeset committer note we see that there were no
# # kmem:kmalloc in that last part of the file, but there were some
# # kmem:kmem_cache_alloc ones:
#
# perf report --time 20119.782088, --stdio
#
# Total Lost Samples: 0
#
# Samples: 0 of event 'kmem:kmalloc'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
# Samples: 0 of event 'kmem:kmalloc_node'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
# Samples: 0 of event 'kmem:kfree'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
# Samples: 8 of event 'kmem:kmem_cache_alloc'
# Event count (approx.): 8
#
# Overhead Trace output
# ........ ..................................................................................................................
#
75.00% call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO
12.50% call_site=ffffffffb90ad33a ptr=0xffff8889f071f6e0 bytes_req=160 bytes_alloc=160 gfp_flags=GFP_ATOMIC|__GFP_NOTRACK
12.50% call_site=ffffffffb9287cc1 ptr=0xffff8889b12722d8 bytes_req=104 bytes_alloc=104 gfp_flags=GFP_NOFS|__GFP_ZERO
#
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-7-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-30 01:15:46 +08:00
|
|
|
}
|
|
|
|
|
2013-04-03 20:26:19 +08:00
|
|
|
sort__setup_elide(stdout);
|
2009-07-01 06:01:20 +08:00
|
|
|
|
2012-03-09 06:47:47 +08:00
|
|
|
ret = __cmd_report(&report);
|
2013-02-03 14:38:21 +08:00
|
|
|
if (ret == K_SWITCH_INPUT_DATA) {
|
|
|
|
perf_session__delete(session);
|
|
|
|
goto repeat;
|
|
|
|
} else
|
|
|
|
ret = 0;
|
|
|
|
|
2012-03-09 06:47:47 +08:00
|
|
|
error:
|
perf report: Remove the time slices number limitation
Previously it was only allowed to use at most 10 time slices in 'perf
report --time'.
This patch removes this limitation.
For example, following command line is OK (12 time slices)
perf report --stdio --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-8-git-send-email-yao.jin@linux.intel.com
[ No need to check for NULL to call free, use zfree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-10 23:00:32 +08:00
|
|
|
zfree(&report.ptime_range);
|
|
|
|
|
2012-03-09 06:47:47 +08:00
|
|
|
perf_session__delete(session);
|
|
|
|
return ret;
|
2009-05-26 15:17:18 +08:00
|
|
|
}
|