openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/include/net/switchdev.h

287 lines
7.4 KiB
C
Raw Normal View History

net: introduce generic switch devices support The goal of this is to provide a possibility to support various switch chips. Drivers should implement relevant ndos to do so. Now there is only one ndo defined: - for getting physical switch id is in place. Note that user can use random port netdevice to access the switch. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Thomas Graf <tgraf@suug.ch> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-28 21:34:17 +08:00
/*
* include/net/switchdev.h - Switch device API
* Copyright (c) 2014 Jiri Pirko <jiri@resnulli.us>
switchdev: add netlink flags to IPv4 FIB add op Pass in the netlink flags (NLM_F_*) into switchdev driver for IPv4 FIB add op to allow driver to 1) optimize hardware updates, 2) handle ip route prepend and append commands correctly. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-10 04:59:09 +08:00
* Copyright (c) 2014-2015 Scott Feldman <sfeldma@gmail.com>
net: introduce generic switch devices support The goal of this is to provide a possibility to support various switch chips. Drivers should implement relevant ndos to do so. Now there is only one ndo defined: - for getting physical switch id is in place. Note that user can use random port netdevice to access the switch. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Thomas Graf <tgraf@suug.ch> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-28 21:34:17 +08:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _LINUX_SWITCHDEV_H_
#define _LINUX_SWITCHDEV_H_
#include <linux/netdevice.h>
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
#include <linux/notifier.h>
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
#define SWITCHDEV_F_NO_RECURSE BIT(0)
switchdev: rename "trans" to "trans_ph". This is temporary, name "trans" will be used for something else and "trans_ph" will eventually disappear. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:40 +08:00
enum switchdev_trans_ph {
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
SWITCHDEV_TRANS_NONE,
SWITCHDEV_TRANS_PREPARE,
SWITCHDEV_TRANS_ABORT,
SWITCHDEV_TRANS_COMMIT,
};
enum switchdev_attr_id {
SWITCHDEV_ATTR_UNDEFINED,
switchdev: convert parent_id_get to switchdev attr get Switch ID is just a gettable port attribute. Convert switchdev op switchdev_parent_id_get to a switchdev attr. Note: for sysfs and netlink interfaces, SWITCHDEV_ATTR_PORT_PARENT_ID is called with SWITCHDEV_F_NO_RECUSE to limit switch ID user-visiblity to only port netdevs. So when a port is stacked under bond/bridge, the user can only query switch id via the switch ports, but not via the upper devices Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:49 +08:00
SWITCHDEV_ATTR_PORT_PARENT_ID,
switchdev: convert STP update to switchdev attr set STP update is just a settable port attribute, so convert switchdev_port_stp_update to an attr set. For DSA, the prepare phase is skipped and STP updates are only done in the commit phase. This is because currently the DSA drivers don't need to allocate any memory for STP updates and the STP update will not fail to HW (unless something horrible goes wrong on the MDIO bus, in which case the prepare phase wouldn't have been able to predict anyway). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:51 +08:00
SWITCHDEV_ATTR_PORT_STP_STATE,
switchdev: add bridge port flags attr rocker: use switchdev get/set attr for bridge port flags Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:55 +08:00
SWITCHDEV_ATTR_PORT_BRIDGE_FLAGS,
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
};
struct switchdev_attr {
enum switchdev_attr_id id;
switchdev: rename "trans" to "trans_ph". This is temporary, name "trans" will be used for something else and "trans_ph" will eventually disappear. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:40 +08:00
enum switchdev_trans_ph trans_ph;
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
u32 flags;
switchdev: convert parent_id_get to switchdev attr get Switch ID is just a gettable port attribute. Convert switchdev op switchdev_parent_id_get to a switchdev attr. Note: for sysfs and netlink interfaces, SWITCHDEV_ATTR_PORT_PARENT_ID is called with SWITCHDEV_F_NO_RECUSE to limit switch ID user-visiblity to only port netdevs. So when a port is stacked under bond/bridge, the user can only query switch id via the switch ports, but not via the upper devices Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:49 +08:00
union {
struct netdev_phys_item_id ppid; /* PORT_PARENT_ID */
switchdev: convert STP update to switchdev attr set STP update is just a settable port attribute, so convert switchdev_port_stp_update to an attr set. For DSA, the prepare phase is skipped and STP updates are only done in the commit phase. This is because currently the DSA drivers don't need to allocate any memory for STP updates and the STP update will not fail to HW (unless something horrible goes wrong on the MDIO bus, in which case the prepare phase wouldn't have been able to predict anyway). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:51 +08:00
u8 stp_state; /* PORT_STP_STATE */
switchdev: add bridge port flags attr rocker: use switchdev get/set attr for bridge port flags Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:55 +08:00
unsigned long brport_flags; /* PORT_BRIDGE_FLAGS */
switchdev: don't use anonymous union on switchdev attr/obj structs Older gcc versions (e.g. gcc version 4.4.6) don't like anonymous unions which was causing build issues on the newly added switchdev attr/obj structs. Fix this by using named union on structs. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 02:16:50 +08:00
} u;
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
};
switchdev: add swdev ops As discussed at netconf, introduce swdev_ops as first step to move switchdev ops from ndo to swdev. This will keep switchdev from cluttering up ndo ops space. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16 12:07:14 +08:00
struct fib_info;
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
enum switchdev_obj_id {
SWITCHDEV_OBJ_UNDEFINED,
switchdev: add port vlan obj VLAN obj has flags (PVID and untagged) as well as start and end vid ranges. The switchdev driver can optimize programing the device using the ranges. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:53 +08:00
SWITCHDEV_OBJ_PORT_VLAN,
switchdev: convert fib_ipv4_add/del over to switchdev_port_obj_add/del The IPv4 FIB ops convert nicely to the switchdev objs and we're left with only four switchdev ops: port get/set and port add/del. Other objs will follow, such as FDB. So go ahead and convert IPv4 FIB over to switchdev obj for consistency, anticipating more objs to come. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:06 +08:00
SWITCHDEV_OBJ_IPV4_FIB,
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
SWITCHDEV_OBJ_PORT_FDB,
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
};
struct switchdev_obj {
enum switchdev_obj_id id;
switchdev: rename "trans" to "trans_ph". This is temporary, name "trans" will be used for something else and "trans_ph" will eventually disappear. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 16:02:40 +08:00
enum switchdev_trans_ph trans_ph;
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
int (*cb)(struct net_device *dev, struct switchdev_obj *obj);
switchdev: add port vlan obj VLAN obj has flags (PVID and untagged) as well as start and end vid ranges. The switchdev driver can optimize programing the device using the ranges. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:53 +08:00
union {
switchdev: align comment with other comments in block Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 14:03:53 +08:00
struct switchdev_obj_vlan { /* PORT_VLAN */
switchdev: add port vlan obj VLAN obj has flags (PVID and untagged) as well as start and end vid ranges. The switchdev driver can optimize programing the device using the ranges. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:53 +08:00
u16 flags;
switchdev: rename vlan vid_start to vid_begin Use vid_begin/end to be consistent with BRIDGE_VLAN_INFO_RANGE_BEGIN/END. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-22 15:27:16 +08:00
u16 vid_begin;
switchdev: add port vlan obj VLAN obj has flags (PVID and untagged) as well as start and end vid ranges. The switchdev driver can optimize programing the device using the ranges. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:53 +08:00
u16 vid_end;
} vlan;
switchdev: convert fib_ipv4_add/del over to switchdev_port_obj_add/del The IPv4 FIB ops convert nicely to the switchdev objs and we're left with only four switchdev ops: port get/set and port add/del. Other objs will follow, such as FDB. So go ahead and convert IPv4 FIB over to switchdev obj for consistency, anticipating more objs to come. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:06 +08:00
struct switchdev_obj_ipv4_fib { /* IPV4_FIB */
u32 dst;
int dst_len;
struct fib_info *fi;
u8 tos;
u8 type;
u32 nlflags;
u32 tb_id;
} ipv4_fib;
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
struct switchdev_obj_fdb { /* PORT_FDB */
Revert "Merge branch 'mv88e6xxx-switchdev-fdb'" This reverts commit f1d5ca434413b20cd3f8c18ff2b634b7782149a5, reversing changes made to 4933d85c5173832ebd261756522095837583c458. I applied v2 instead of v3. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12 03:00:37 +08:00
const unsigned char *addr;
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
u16 vid;
net: switchdev: support static FDB addresses This patch adds an ndm_state member to the switchdev_obj_fdb structure, in order to support static FDB addresses. Set Rocker ndm_state to NUD_REACHABLE. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 21:09:52 +08:00
u16 ndm_state;
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
} fdb;
switchdev: don't use anonymous union on switchdev attr/obj structs Older gcc versions (e.g. gcc version 4.4.6) don't like anonymous unions which was causing build issues on the newly added switchdev attr/obj structs. Fix this by using named union on structs. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 02:16:50 +08:00
} u;
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
};
switchdev: add swdev ops As discussed at netconf, introduce swdev_ops as first step to move switchdev ops from ndo to swdev. This will keep switchdev from cluttering up ndo ops space. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16 12:07:14 +08:00
/**
* struct switchdev_ops - switchdev operations
*
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
* @switchdev_port_attr_get: Get a port attribute (see switchdev_attr).
*
* @switchdev_port_attr_set: Set a port attribute (see switchdev_attr).
*
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
* @switchdev_port_obj_add: Add an object to port (see switchdev_obj).
*
* @switchdev_port_obj_del: Delete an object from port (see switchdev_obj).
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
*
* @switchdev_port_obj_dump: Dump port objects (see switchdev_obj).
switchdev: add swdev ops As discussed at netconf, introduce swdev_ops as first step to move switchdev ops from ndo to swdev. This will keep switchdev from cluttering up ndo ops space. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16 12:07:14 +08:00
*/
switchdev: s/swdev_/switchdev_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:47 +08:00
struct switchdev_ops {
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
int (*switchdev_port_attr_get)(struct net_device *dev,
struct switchdev_attr *attr);
int (*switchdev_port_attr_set)(struct net_device *dev,
struct switchdev_attr *attr);
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
int (*switchdev_port_obj_add)(struct net_device *dev,
struct switchdev_obj *obj);
int (*switchdev_port_obj_del)(struct net_device *dev,
struct switchdev_obj *obj);
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
int (*switchdev_port_obj_dump)(struct net_device *dev,
struct switchdev_obj *obj);
switchdev: add swdev ops As discussed at netconf, introduce swdev_ops as first step to move switchdev ops from ndo to swdev. This will keep switchdev from cluttering up ndo ops space. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16 12:07:14 +08:00
};
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
enum switchdev_notifier_type {
SWITCHDEV_FDB_ADD = 1,
SWITCHDEV_FDB_DEL,
net: replace br_fdb_external_learn_* calls with switchdev notifier events This patch benefits from newly introduced switchdev notifier and uses it to propagate fdb learn events from rocker driver to bridge. That avoids direct function calls and possible use by other listeners (ovs). Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:37 +08:00
};
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
struct switchdev_notifier_info {
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
struct net_device *dev;
};
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
struct switchdev_notifier_fdb_info {
struct switchdev_notifier_info info; /* must be first */
net: replace br_fdb_external_learn_* calls with switchdev notifier events This patch benefits from newly introduced switchdev notifier and uses it to propagate fdb learn events from rocker driver to bridge. That avoids direct function calls and possible use by other listeners (ovs). Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:37 +08:00
const unsigned char *addr;
u16 vid;
};
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
static inline struct net_device *
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
switchdev_notifier_info_to_dev(const struct switchdev_notifier_info *info)
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
{
return info->dev;
}
net: introduce generic switch devices support The goal of this is to provide a possibility to support various switch chips. Drivers should implement relevant ndos to do so. Now there is only one ndo defined: - for getting physical switch id is in place. Note that user can use random port netdevice to access the switch. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Thomas Graf <tgraf@suug.ch> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-28 21:34:17 +08:00
#ifdef CONFIG_NET_SWITCHDEV
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
int switchdev_port_attr_get(struct net_device *dev,
struct switchdev_attr *attr);
int switchdev_port_attr_set(struct net_device *dev,
struct switchdev_attr *attr);
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
int switchdev_port_obj_add(struct net_device *dev, struct switchdev_obj *obj);
int switchdev_port_obj_del(struct net_device *dev, struct switchdev_obj *obj);
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
int switchdev_port_obj_dump(struct net_device *dev, struct switchdev_obj *obj);
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
int register_switchdev_notifier(struct notifier_block *nb);
int unregister_switchdev_notifier(struct notifier_block *nb);
int call_switchdev_notifiers(unsigned long val, struct net_device *dev,
struct switchdev_notifier_info *info);
switchdev: add new switchdev_port_bridge_getlink Like bridge_setlink, add switchdev wrapper to handle bridge_getlink and call into port driver to get port attrs. For now, only BR_LEARNING and BR_LEARNING_SYNC are returned. To add more, we'll probably want to break away from ndo_dflt_bridge_getlink() and build the netlink skb directly in the switchdev code. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:04 +08:00
int switchdev_port_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
struct net_device *dev, u32 filter_mask,
int nlflags);
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
int switchdev_port_bridge_setlink(struct net_device *dev,
struct nlmsghdr *nlh, u16 flags);
int switchdev_port_bridge_dellink(struct net_device *dev,
struct nlmsghdr *nlh, u16 flags);
int switchdev_fib_ipv4_add(u32 dst, int dst_len, struct fib_info *fi,
u8 tos, u8 type, u32 nlflags, u32 tb_id);
int switchdev_fib_ipv4_del(u32 dst, int dst_len, struct fib_info *fi,
u8 tos, u8 type, u32 tb_id);
void switchdev_fib_ipv4_abort(struct fib_info *fi);
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
int switchdev_port_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
struct net_device *dev, const unsigned char *addr,
u16 vid, u16 nlm_flags);
int switchdev_port_fdb_del(struct ndmsg *ndm, struct nlattr *tb[],
struct net_device *dev, const unsigned char *addr,
u16 vid);
int switchdev_port_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb,
struct net_device *dev,
struct net_device *filter_dev, int idx);
switchdev: add offload_fwd_mark generator helper skb->offload_fwd_mark and dev->offload_fwd_mark are 32-bit and should be unique for device and may even be unique for a sub-set of ports within device, so add switchdev helper function to generate unique marks based on port's switch ID and group_ifindex. group_ifindex would typically be the container dev's ifindex, such as the bridge's ifindex. The generator uses a global hash table to store offload_fwd_marks hashed by {switch ID, group_ifindex} key. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-19 09:24:50 +08:00
void switchdev_port_fwd_mark_set(struct net_device *dev,
struct net_device *group_dev,
bool joining);
switchdev: add IPv4 fib ndo ops wrappers Add IPv4 fib ndo wrapper funcs and stub them out for now. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06 13:21:15 +08:00
net: introduce generic switch devices support The goal of this is to provide a possibility to support various switch chips. Drivers should implement relevant ndos to do so. Now there is only one ndo defined: - for getting physical switch id is in place. Note that user can use random port netdevice to access the switch. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Thomas Graf <tgraf@suug.ch> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-28 21:34:17 +08:00
#else
switchdev: introduce get/set attrs ops Add two new swdev ops for get/set switch port attributes. Most swdev interactions on a port are gets or sets on port attributes, so rather than adding ops for each attribute, let's define clean get/set ops for all attributes, and then we can have clear, consistent rules on how attributes propagate on stacked devs. Add the basic algorithms for get/set attr ops. Use the same recusive algo to walk lower devs we've used for STP updates, for example. For get, compare attr value for each lower dev and only return success if attr values match across all lower devs. For sets, set the same attr value for all lower devs. We'll use a two-phase prepare-commit transaction model for sets. In the first phase, the driver(s) are asked if attr set is OK. If all OK, the commit attr set in second phase. A driver would NACK the prepare phase if it can't set the attr due to lack of resources or support, within it's control. RTNL lock must be held across both phases because we'll recurse all lower devs first in prepare phase, and then recurse all lower devs again in commit phase. If any lower dev fails the prepare phase, we need to abort the transaction for all lower devs. If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to indicate get/set only work on port (lowest) device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:48 +08:00
static inline int switchdev_port_attr_get(struct net_device *dev,
struct switchdev_attr *attr)
{
return -EOPNOTSUPP;
}
static inline int switchdev_port_attr_set(struct net_device *dev,
struct switchdev_attr *attr)
{
return -EOPNOTSUPP;
}
switchdev: introduce switchdev add/del obj ops Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:52 +08:00
static inline int switchdev_port_obj_add(struct net_device *dev,
struct switchdev_obj *obj)
{
return -EOPNOTSUPP;
}
static inline int switchdev_port_obj_del(struct net_device *dev,
struct switchdev_obj *obj)
{
return -EOPNOTSUPP;
}
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
static inline int switchdev_port_obj_dump(struct net_device *dev,
struct switchdev_obj *obj)
{
return -EOPNOTSUPP;
}
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
static inline int register_switchdev_notifier(struct notifier_block *nb)
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
{
return 0;
}
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
static inline int unregister_switchdev_notifier(struct notifier_block *nb)
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
{
return 0;
}
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
static inline int call_switchdev_notifiers(unsigned long val,
struct net_device *dev,
struct switchdev_notifier_info *info)
switchdev: introduce switchdev notifier This patch introduces new notifier for purposes of exposing events which happen on switch driver side. The consumers of the event messages are mainly involved masters, namely bridge and ovs. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 06:49:36 +08:00
{
return NOTIFY_DONE;
}
switchdev: add new switchdev_port_bridge_getlink Like bridge_setlink, add switchdev wrapper to handle bridge_getlink and call into port driver to get port attrs. For now, only BR_LEARNING and BR_LEARNING_SYNC are returned. To add more, we'll probably want to break away from ndo_dflt_bridge_getlink() and build the netlink skb directly in the switchdev code. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:04 +08:00
static inline int switchdev_port_bridge_getlink(struct sk_buff *skb, u32 pid,
u32 seq, struct net_device *dev,
u32 filter_mask, int nlflags)
{
return -EOPNOTSUPP;
}
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
static inline int switchdev_port_bridge_setlink(struct net_device *dev,
struct nlmsghdr *nlh,
u16 flags)
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
{
return -EOPNOTSUPP;
}
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
static inline int switchdev_port_bridge_dellink(struct net_device *dev,
struct nlmsghdr *nlh,
u16 flags)
swdevice: add new apis to set and del bridge port attributes This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:13 +08:00
{
return -EOPNOTSUPP;
}
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
static inline int switchdev_fib_ipv4_add(u32 dst, int dst_len,
struct fib_info *fi,
u8 tos, u8 type,
u32 nlflags, u32 tb_id)
switchdev: add IPv4 fib ndo ops wrappers Add IPv4 fib ndo wrapper funcs and stub them out for now. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06 13:21:15 +08:00
{
return 0;
}
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
static inline int switchdev_fib_ipv4_del(u32 dst, int dst_len,
struct fib_info *fi,
u8 tos, u8 type, u32 tb_id)
switchdev: add IPv4 fib ndo ops wrappers Add IPv4 fib ndo wrapper funcs and stub them out for now. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06 13:21:15 +08:00
{
return 0;
}
switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/ Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:46 +08:00
static inline void switchdev_fib_ipv4_abort(struct fib_info *fi)
fib: hook IPv4 fib for hardware offload Call into the switchdev driver any time an IPv4 fib entry is added/modified/deleted from the kernel's FIB. The switchdev driver may or may not install the route to the offload device. In the case where the driver tries to install the route and something goes wrong (device's routing table is full, etc), then all of the offloaded routes will be flushed from the device, route forwarding falls back to the kernel, and no more routes are offloading. We can refine this logic later. For now, use the simplist model of offloading routes up to the point of failure, and then on failure, undo everything and mark IPv4 offloading disabled. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06 13:21:19 +08:00
{
}
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
static inline int switchdev_port_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
struct net_device *dev,
const unsigned char *addr,
u16 vid, u16 nlm_flags)
{
return -EOPNOTSUPP;
}
static inline int switchdev_port_fdb_del(struct ndmsg *ndm, struct nlattr *tb[],
struct net_device *dev,
const unsigned char *addr, u16 vid)
{
return -EOPNOTSUPP;
}
static inline int switchdev_port_fdb_dump(struct sk_buff *skb,
struct netlink_callback *cb,
struct net_device *dev,
struct net_device *filter_dev,
int idx)
{
return -EOPNOTSUPP;
}
switchdev: add offload_fwd_mark generator helper skb->offload_fwd_mark and dev->offload_fwd_mark are 32-bit and should be unique for device and may even be unique for a sub-set of ports within device, so add switchdev helper function to generate unique marks based on port's switch ID and group_ifindex. group_ifindex would typically be the container dev's ifindex, such as the bridge's ifindex. The generator uses a global hash table to store offload_fwd_marks hashed by {switch ID, group_ifindex} key. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-19 09:24:50 +08:00
static inline void switchdev_port_fwd_mark_set(struct net_device *dev,
struct net_device *group_dev,
bool joining)
{
}
net: introduce generic switch devices support The goal of this is to provide a possibility to support various switch chips. Drivers should implement relevant ndos to do so. Now there is only one ndo defined: - for getting physical switch id is in place. Note that user can use random port netdevice to access the switch. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Thomas Graf <tgraf@suug.ch> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-28 21:34:17 +08:00
#endif
#endif /* _LINUX_SWITCHDEV_H_ */