License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2017-02-23 07:41:57 +08:00
|
|
|
#include <linux/node.h>
|
|
|
|
|
#include <linux/mmzone.h>
|
|
|
|
|
#include <linux/compaction.h>
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:52 +08:00
|
|
|
/*
|
|
|
|
|
* The order of these masks is important. Matching masks will be seen
|
|
|
|
|
* first and the left over flags will end up showing by themselves.
|
|
|
|
|
*
|
|
|
|
|
* For example, if we have GFP_KERNEL before GFP_USER we wil get:
|
|
|
|
|
*
|
|
|
|
|
* GFP_KERNEL|GFP_HARDWALL
|
|
|
|
|
*
|
|
|
|
|
* Thus most bits set go first.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define __def_gfpflag_names \
|
|
|
|
|
{(unsigned long)GFP_TRANSHUGE, "GFP_TRANSHUGE"}, \
|
mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations
After the previous patch, we can distinguish costly allocations that
should be really lightweight, such as THP page faults, with
__GFP_NORETRY. This means we don't need to recognize khugepaged
allocations via PF_KTHREAD anymore. We can also change THP page faults
in areas where madvise(MADV_HUGEPAGE) was used to try as hard as
khugepaged, as the process has indicated that it benefits from THP's and
is willing to pay some initial latency costs.
We can also make the flags handling less cryptic by distinguishing
GFP_TRANSHUGE_LIGHT (no reclaim at all, default mode in page fault) from
GFP_TRANSHUGE (only direct reclaim, khugepaged default). Adding
__GFP_NORETRY or __GFP_KSWAPD_RECLAIM is done where needed.
The patch effectively changes the current GFP_TRANSHUGE users as
follows:
* get_huge_zero_page() - the zero page lifetime should be relatively
long and it's shared by multiple users, so it's worth spending some
effort on it. We use GFP_TRANSHUGE, and __GFP_NORETRY is not added.
This also restores direct reclaim to this allocation, which was
unintentionally removed by commit e4a49efe4e7e ("mm: thp: set THP defrag
by default to madvise and add a stall-free defrag option")
* alloc_hugepage_khugepaged_gfpmask() - this is khugepaged, so latency
is not an issue. So if khugepaged "defrag" is enabled (the default), do
reclaim via GFP_TRANSHUGE without __GFP_NORETRY. We can remove the
PF_KTHREAD check from page alloc.
As a side-effect, khugepaged will now no longer check if the initial
compaction was deferred or contended. This is OK, as khugepaged sleep
times between collapsion attempts are long enough to prevent noticeable
disruption, so we should allow it to spend some effort.
* migrate_misplaced_transhuge_page() - already was masking out
__GFP_RECLAIM, so just convert to GFP_TRANSHUGE_LIGHT which is
equivalent.
* alloc_hugepage_direct_gfpmask() - vma's with VM_HUGEPAGE (via madvise)
are now allocating without __GFP_NORETRY. Other vma's keep using
__GFP_NORETRY if direct reclaim/compaction is at all allowed (by default
it's allowed only for madvised vma's). The rest is conversion to
GFP_TRANSHUGE(_LIGHT).
[mhocko@suse.com: suggested GFP_TRANSHUGE_LIGHT]
Link: http://lkml.kernel.org/r/20160721073614.24395-7-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 06:49:25 +08:00
|
|
|
{(unsigned long)GFP_TRANSHUGE_LIGHT, "GFP_TRANSHUGE_LIGHT"}, \
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:52 +08:00
|
|
|
{(unsigned long)GFP_HIGHUSER_MOVABLE, "GFP_HIGHUSER_MOVABLE"},\
|
|
|
|
|
{(unsigned long)GFP_HIGHUSER, "GFP_HIGHUSER"}, \
|
|
|
|
|
{(unsigned long)GFP_USER, "GFP_USER"}, \
|
|
|
|
|
{(unsigned long)GFP_KERNEL_ACCOUNT, "GFP_KERNEL_ACCOUNT"}, \
|
|
|
|
|
{(unsigned long)GFP_KERNEL, "GFP_KERNEL"}, \
|
|
|
|
|
{(unsigned long)GFP_NOFS, "GFP_NOFS"}, \
|
|
|
|
|
{(unsigned long)GFP_ATOMIC, "GFP_ATOMIC"}, \
|
|
|
|
|
{(unsigned long)GFP_NOIO, "GFP_NOIO"}, \
|
|
|
|
|
{(unsigned long)GFP_NOWAIT, "GFP_NOWAIT"}, \
|
|
|
|
|
{(unsigned long)GFP_DMA, "GFP_DMA"}, \
|
|
|
|
|
{(unsigned long)__GFP_HIGHMEM, "__GFP_HIGHMEM"}, \
|
|
|
|
|
{(unsigned long)GFP_DMA32, "GFP_DMA32"}, \
|
|
|
|
|
{(unsigned long)__GFP_HIGH, "__GFP_HIGH"}, \
|
|
|
|
|
{(unsigned long)__GFP_ATOMIC, "__GFP_ATOMIC"}, \
|
|
|
|
|
{(unsigned long)__GFP_IO, "__GFP_IO"}, \
|
|
|
|
|
{(unsigned long)__GFP_FS, "__GFP_FS"}, \
|
|
|
|
|
{(unsigned long)__GFP_NOWARN, "__GFP_NOWARN"}, \
|
2017-07-13 05:36:45 +08:00
|
|
|
{(unsigned long)__GFP_RETRY_MAYFAIL, "__GFP_RETRY_MAYFAIL"}, \
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:52 +08:00
|
|
|
{(unsigned long)__GFP_NOFAIL, "__GFP_NOFAIL"}, \
|
|
|
|
|
{(unsigned long)__GFP_NORETRY, "__GFP_NORETRY"}, \
|
|
|
|
|
{(unsigned long)__GFP_COMP, "__GFP_COMP"}, \
|
|
|
|
|
{(unsigned long)__GFP_ZERO, "__GFP_ZERO"}, \
|
|
|
|
|
{(unsigned long)__GFP_NOMEMALLOC, "__GFP_NOMEMALLOC"}, \
|
|
|
|
|
{(unsigned long)__GFP_MEMALLOC, "__GFP_MEMALLOC"}, \
|
|
|
|
|
{(unsigned long)__GFP_HARDWALL, "__GFP_HARDWALL"}, \
|
|
|
|
|
{(unsigned long)__GFP_THISNODE, "__GFP_THISNODE"}, \
|
|
|
|
|
{(unsigned long)__GFP_RECLAIMABLE, "__GFP_RECLAIMABLE"}, \
|
|
|
|
|
{(unsigned long)__GFP_MOVABLE, "__GFP_MOVABLE"}, \
|
|
|
|
|
{(unsigned long)__GFP_ACCOUNT, "__GFP_ACCOUNT"}, \
|
|
|
|
|
{(unsigned long)__GFP_WRITE, "__GFP_WRITE"}, \
|
|
|
|
|
{(unsigned long)__GFP_RECLAIM, "__GFP_RECLAIM"}, \
|
|
|
|
|
{(unsigned long)__GFP_DIRECT_RECLAIM, "__GFP_DIRECT_RECLAIM"},\
|
2017-01-11 08:57:42 +08:00
|
|
|
{(unsigned long)__GFP_KSWAPD_RECLAIM, "__GFP_KSWAPD_RECLAIM"}\
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:52 +08:00
|
|
|
|
|
|
|
|
#define show_gfp_flags(flags) \
|
|
|
|
|
(flags) ? __print_flags(flags, "|", \
|
|
|
|
|
__def_gfpflag_names \
|
|
|
|
|
) : "none"
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_MMU
|
|
|
|
|
#define IF_HAVE_PG_MLOCK(flag,string) ,{1UL << flag, string}
|
|
|
|
|
#else
|
|
|
|
|
#define IF_HAVE_PG_MLOCK(flag,string)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_ARCH_USES_PG_UNCACHED
|
|
|
|
|
#define IF_HAVE_PG_UNCACHED(flag,string) ,{1UL << flag, string}
|
|
|
|
|
#else
|
|
|
|
|
#define IF_HAVE_PG_UNCACHED(flag,string)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_MEMORY_FAILURE
|
|
|
|
|
#define IF_HAVE_PG_HWPOISON(flag,string) ,{1UL << flag, string}
|
|
|
|
|
#else
|
|
|
|
|
#define IF_HAVE_PG_HWPOISON(flag,string)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if defined(CONFIG_IDLE_PAGE_TRACKING) && defined(CONFIG_64BIT)
|
|
|
|
|
#define IF_HAVE_PG_IDLE(flag,string) ,{1UL << flag, string}
|
|
|
|
|
#else
|
|
|
|
|
#define IF_HAVE_PG_IDLE(flag,string)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#define __def_pageflag_names \
|
|
|
|
|
{1UL << PG_locked, "locked" }, \
|
2016-12-25 11:00:30 +08:00
|
|
|
{1UL << PG_waiters, "waiters" }, \
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:52 +08:00
|
|
|
{1UL << PG_error, "error" }, \
|
|
|
|
|
{1UL << PG_referenced, "referenced" }, \
|
|
|
|
|
{1UL << PG_uptodate, "uptodate" }, \
|
|
|
|
|
{1UL << PG_dirty, "dirty" }, \
|
|
|
|
|
{1UL << PG_lru, "lru" }, \
|
|
|
|
|
{1UL << PG_active, "active" }, \
|
|
|
|
|
{1UL << PG_slab, "slab" }, \
|
|
|
|
|
{1UL << PG_owner_priv_1, "owner_priv_1" }, \
|
|
|
|
|
{1UL << PG_arch_1, "arch_1" }, \
|
|
|
|
|
{1UL << PG_reserved, "reserved" }, \
|
|
|
|
|
{1UL << PG_private, "private" }, \
|
|
|
|
|
{1UL << PG_private_2, "private_2" }, \
|
|
|
|
|
{1UL << PG_writeback, "writeback" }, \
|
|
|
|
|
{1UL << PG_head, "head" }, \
|
|
|
|
|
{1UL << PG_mappedtodisk, "mappedtodisk" }, \
|
|
|
|
|
{1UL << PG_reclaim, "reclaim" }, \
|
|
|
|
|
{1UL << PG_swapbacked, "swapbacked" }, \
|
|
|
|
|
{1UL << PG_unevictable, "unevictable" } \
|
|
|
|
|
IF_HAVE_PG_MLOCK(PG_mlocked, "mlocked" ) \
|
|
|
|
|
IF_HAVE_PG_UNCACHED(PG_uncached, "uncached" ) \
|
|
|
|
|
IF_HAVE_PG_HWPOISON(PG_hwpoison, "hwpoison" ) \
|
|
|
|
|
IF_HAVE_PG_IDLE(PG_young, "young" ) \
|
|
|
|
|
IF_HAVE_PG_IDLE(PG_idle, "idle" )
|
|
|
|
|
|
|
|
|
|
#define show_page_flags(flags) \
|
|
|
|
|
(flags) ? __print_flags(flags, "|", \
|
|
|
|
|
__def_pageflag_names \
|
|
|
|
|
) : "none"
|
|
|
|
|
|
|
|
|
|
#if defined(CONFIG_X86)
|
2016-03-18 05:18:53 +08:00
|
|
|
#define __VM_ARCH_SPECIFIC_1 {VM_PAT, "pat" }
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:52 +08:00
|
|
|
#elif defined(CONFIG_PPC)
|
2016-03-18 05:18:53 +08:00
|
|
|
#define __VM_ARCH_SPECIFIC_1 {VM_SAO, "sao" }
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:52 +08:00
|
|
|
#elif defined(CONFIG_PARISC) || defined(CONFIG_METAG) || defined(CONFIG_IA64)
|
2016-03-18 05:18:53 +08:00
|
|
|
#define __VM_ARCH_SPECIFIC_1 {VM_GROWSUP, "growsup" }
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:52 +08:00
|
|
|
#elif !defined(CONFIG_MMU)
|
2016-03-18 05:18:53 +08:00
|
|
|
#define __VM_ARCH_SPECIFIC_1 {VM_MAPPED_COPY,"mappedcopy" }
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:52 +08:00
|
|
|
#else
|
2016-03-18 05:18:53 +08:00
|
|
|
#define __VM_ARCH_SPECIFIC_1 {VM_ARCH_1, "arch_1" }
|
|
|
|
|
#endif
|
|
|
|
|
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:52 +08:00
|
|
|
#ifdef CONFIG_MEM_SOFT_DIRTY
|
|
|
|
|
#define IF_HAVE_VM_SOFTDIRTY(flag,name) {flag, name },
|
|
|
|
|
#else
|
|
|
|
|
#define IF_HAVE_VM_SOFTDIRTY(flag,name)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#define __def_vmaflag_names \
|
|
|
|
|
{VM_READ, "read" }, \
|
|
|
|
|
{VM_WRITE, "write" }, \
|
|
|
|
|
{VM_EXEC, "exec" }, \
|
|
|
|
|
{VM_SHARED, "shared" }, \
|
|
|
|
|
{VM_MAYREAD, "mayread" }, \
|
|
|
|
|
{VM_MAYWRITE, "maywrite" }, \
|
|
|
|
|
{VM_MAYEXEC, "mayexec" }, \
|
|
|
|
|
{VM_MAYSHARE, "mayshare" }, \
|
|
|
|
|
{VM_GROWSDOWN, "growsdown" }, \
|
2016-03-18 05:18:53 +08:00
|
|
|
{VM_UFFD_MISSING, "uffd_missing" }, \
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:52 +08:00
|
|
|
{VM_PFNMAP, "pfnmap" }, \
|
|
|
|
|
{VM_DENYWRITE, "denywrite" }, \
|
2016-03-18 05:18:53 +08:00
|
|
|
{VM_UFFD_WP, "uffd_wp" }, \
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:52 +08:00
|
|
|
{VM_LOCKED, "locked" }, \
|
|
|
|
|
{VM_IO, "io" }, \
|
|
|
|
|
{VM_SEQ_READ, "seqread" }, \
|
|
|
|
|
{VM_RAND_READ, "randread" }, \
|
|
|
|
|
{VM_DONTCOPY, "dontcopy" }, \
|
|
|
|
|
{VM_DONTEXPAND, "dontexpand" }, \
|
2016-03-18 05:18:53 +08:00
|
|
|
{VM_LOCKONFAULT, "lockonfault" }, \
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:52 +08:00
|
|
|
{VM_ACCOUNT, "account" }, \
|
|
|
|
|
{VM_NORESERVE, "noreserve" }, \
|
|
|
|
|
{VM_HUGETLB, "hugetlb" }, \
|
2016-03-18 05:18:53 +08:00
|
|
|
__VM_ARCH_SPECIFIC_1 , \
|
mm,fork: introduce MADV_WIPEONFORK
Introduce MADV_WIPEONFORK semantics, which result in a VMA being empty
in the child process after fork. This differs from MADV_DONTFORK in one
important way.
If a child process accesses memory that was MADV_WIPEONFORK, it will get
zeroes. The address ranges are still valid, they are just empty.
If a child process accesses memory that was MADV_DONTFORK, it will get a
segmentation fault, since those address ranges are no longer valid in
the child after fork.
Since MADV_DONTFORK also seems to be used to allow very large programs
to fork in systems with strict memory overcommit restrictions, changing
the semantics of MADV_DONTFORK might break existing programs.
MADV_WIPEONFORK only works on private, anonymous VMAs.
The use case is libraries that store or cache information, and want to
know that they need to regenerate it in the child process after fork.
Examples of this would be:
- systemd/pulseaudio API checks (fail after fork) (replacing a getpid
check, which is too slow without a PID cache)
- PKCS#11 API reinitialization check (mandated by specification)
- glibc's upcoming PRNG (reseed after fork)
- OpenSSL PRNG (reseed after fork)
The security benefits of a forking server having a re-inialized PRNG in
every child process are pretty obvious. However, due to libraries
having all kinds of internal state, and programs getting compiled with
many different versions of each library, it is unreasonable to expect
calling programs to re-initialize everything manually after fork.
A further complication is the proliferation of clone flags, programs
bypassing glibc's functions to call clone directly, and programs calling
unshare, causing the glibc pthread_atfork hook to not get called.
It would be better to have the kernel take care of this automatically.
The patch also adds MADV_KEEPONFORK, to undo the effects of a prior
MADV_WIPEONFORK.
This is similar to the OpenBSD minherit syscall with MAP_INHERIT_ZERO:
https://man.openbsd.org/minherit.2
[akpm@linux-foundation.org: numerically order arch/parisc/include/uapi/asm/mman.h #defines]
Link: http://lkml.kernel.org/r/20170811212829.29186-3-riel@redhat.com
Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Florian Weimer <fweimer@redhat.com>
Reported-by: Colm MacCártaigh <colm@allcosts.net>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 07:25:15 +08:00
|
|
|
{VM_WIPEONFORK, "wipeonfork" }, \
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:52 +08:00
|
|
|
{VM_DONTDUMP, "dontdump" }, \
|
|
|
|
|
IF_HAVE_VM_SOFTDIRTY(VM_SOFTDIRTY, "softdirty" ) \
|
|
|
|
|
{VM_MIXEDMAP, "mixedmap" }, \
|
|
|
|
|
{VM_HUGEPAGE, "hugepage" }, \
|
|
|
|
|
{VM_NOHUGEPAGE, "nohugepage" }, \
|
|
|
|
|
{VM_MERGEABLE, "mergeable" } \
|
|
|
|
|
|
|
|
|
|
#define show_vma_flags(flags) \
|
|
|
|
|
(flags) ? __print_flags(flags, "|", \
|
|
|
|
|
__def_vmaflag_names \
|
|
|
|
|
) : "none"
|
2017-02-23 07:41:57 +08:00
|
|
|
|
|
|
|
|
#ifdef CONFIG_COMPACTION
|
|
|
|
|
#define COMPACTION_STATUS \
|
|
|
|
|
EM( COMPACT_SKIPPED, "skipped") \
|
|
|
|
|
EM( COMPACT_DEFERRED, "deferred") \
|
|
|
|
|
EM( COMPACT_CONTINUE, "continue") \
|
|
|
|
|
EM( COMPACT_SUCCESS, "success") \
|
|
|
|
|
EM( COMPACT_PARTIAL_SKIPPED, "partial_skipped") \
|
|
|
|
|
EM( COMPACT_COMPLETE, "complete") \
|
|
|
|
|
EM( COMPACT_NO_SUITABLE_PAGE, "no_suitable_page") \
|
|
|
|
|
EM( COMPACT_NOT_SUITABLE_ZONE, "not_suitable_zone") \
|
|
|
|
|
EMe(COMPACT_CONTENDED, "contended")
|
2017-02-23 07:42:03 +08:00
|
|
|
|
|
|
|
|
/* High-level compaction status feedback */
|
|
|
|
|
#define COMPACTION_FAILED 1
|
|
|
|
|
#define COMPACTION_WITHDRAWN 2
|
|
|
|
|
#define COMPACTION_PROGRESS 3
|
|
|
|
|
|
|
|
|
|
#define compact_result_to_feedback(result) \
|
|
|
|
|
({ \
|
|
|
|
|
enum compact_result __result = result; \
|
|
|
|
|
(compaction_failed(__result)) ? COMPACTION_FAILED : \
|
|
|
|
|
(compaction_withdrawn(__result)) ? COMPACTION_WITHDRAWN : COMPACTION_PROGRESS; \
|
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
#define COMPACTION_FEEDBACK \
|
|
|
|
|
EM(COMPACTION_FAILED, "failed") \
|
|
|
|
|
EM(COMPACTION_WITHDRAWN, "withdrawn") \
|
|
|
|
|
EMe(COMPACTION_PROGRESS, "progress")
|
|
|
|
|
|
|
|
|
|
#define COMPACTION_PRIORITY \
|
|
|
|
|
EM(COMPACT_PRIO_SYNC_FULL, "COMPACT_PRIO_SYNC_FULL") \
|
|
|
|
|
EM(COMPACT_PRIO_SYNC_LIGHT, "COMPACT_PRIO_SYNC_LIGHT") \
|
|
|
|
|
EMe(COMPACT_PRIO_ASYNC, "COMPACT_PRIO_ASYNC")
|
2017-02-23 07:41:57 +08:00
|
|
|
#else
|
|
|
|
|
#define COMPACTION_STATUS
|
2017-02-23 07:42:03 +08:00
|
|
|
#define COMPACTION_PRIORITY
|
|
|
|
|
#define COMPACTION_FEEDBACK
|
2017-02-23 07:41:57 +08:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_ZONE_DMA
|
|
|
|
|
#define IFDEF_ZONE_DMA(X) X
|
|
|
|
|
#else
|
|
|
|
|
#define IFDEF_ZONE_DMA(X)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_ZONE_DMA32
|
|
|
|
|
#define IFDEF_ZONE_DMA32(X) X
|
|
|
|
|
#else
|
|
|
|
|
#define IFDEF_ZONE_DMA32(X)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_HIGHMEM
|
|
|
|
|
#define IFDEF_ZONE_HIGHMEM(X) X
|
|
|
|
|
#else
|
|
|
|
|
#define IFDEF_ZONE_HIGHMEM(X)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#define ZONE_TYPE \
|
|
|
|
|
IFDEF_ZONE_DMA( EM (ZONE_DMA, "DMA")) \
|
|
|
|
|
IFDEF_ZONE_DMA32( EM (ZONE_DMA32, "DMA32")) \
|
|
|
|
|
EM (ZONE_NORMAL, "Normal") \
|
|
|
|
|
IFDEF_ZONE_HIGHMEM( EM (ZONE_HIGHMEM,"HighMem")) \
|
|
|
|
|
EMe(ZONE_MOVABLE,"Movable")
|
|
|
|
|
|
2017-02-23 07:44:24 +08:00
|
|
|
#define LRU_NAMES \
|
|
|
|
|
EM (LRU_INACTIVE_ANON, "inactive_anon") \
|
|
|
|
|
EM (LRU_ACTIVE_ANON, "active_anon") \
|
|
|
|
|
EM (LRU_INACTIVE_FILE, "inactive_file") \
|
|
|
|
|
EM (LRU_ACTIVE_FILE, "active_file") \
|
|
|
|
|
EMe(LRU_UNEVICTABLE, "unevictable")
|
|
|
|
|
|
2017-02-23 07:41:57 +08:00
|
|
|
/*
|
|
|
|
|
* First define the enums in the above macros to be exported to userspace
|
|
|
|
|
* via TRACE_DEFINE_ENUM().
|
|
|
|
|
*/
|
|
|
|
|
#undef EM
|
|
|
|
|
#undef EMe
|
|
|
|
|
#define EM(a, b) TRACE_DEFINE_ENUM(a);
|
|
|
|
|
#define EMe(a, b) TRACE_DEFINE_ENUM(a);
|
|
|
|
|
|
|
|
|
|
COMPACTION_STATUS
|
2017-02-23 07:42:03 +08:00
|
|
|
COMPACTION_PRIORITY
|
2017-07-11 06:48:18 +08:00
|
|
|
/* COMPACTION_FEEDBACK are defines not enums. Not needed here. */
|
2017-02-23 07:41:57 +08:00
|
|
|
ZONE_TYPE
|
2017-02-23 07:44:24 +08:00
|
|
|
LRU_NAMES
|
2017-02-23 07:41:57 +08:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Now redefine the EM() and EMe() macros to map the enums to the strings
|
|
|
|
|
* that will be printed in the output.
|
|
|
|
|
*/
|
|
|
|
|
#undef EM
|
|
|
|
|
#undef EMe
|
|
|
|
|
#define EM(a, b) {a, b},
|
|
|
|
|
#define EMe(a, b) {a, b}
|