mirror of https://gitee.com/openkylin/linux.git
2209 lines
54 KiB
C
2209 lines
54 KiB
C
|
/*
|
||
|
* linux/drivers/serial/pmac_zilog.c
|
||
|
*
|
||
|
* Driver for PowerMac Z85c30 based ESCC cell found in the
|
||
|
* "macio" ASICs of various PowerMac models
|
||
|
*
|
||
|
* Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org)
|
||
|
*
|
||
|
* Derived from drivers/macintosh/macserial.c by Paul Mackerras
|
||
|
* and drivers/serial/sunzilog.c by David S. Miller
|
||
|
*
|
||
|
* Hrm... actually, I ripped most of sunzilog (Thanks David !) and
|
||
|
* adapted special tweaks needed for us. I don't think it's worth
|
||
|
* merging back those though. The DMA code still has to get in
|
||
|
* and once done, I expect that driver to remain fairly stable in
|
||
|
* the long term, unless we change the driver model again...
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or modify
|
||
|
* it under the terms of the GNU General Public License as published by
|
||
|
* the Free Software Foundation; either version 2 of the License, or
|
||
|
* (at your option) any later version.
|
||
|
*
|
||
|
* This program is distributed in the hope that it will be useful,
|
||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
* GNU General Public License for more details.
|
||
|
*
|
||
|
* You should have received a copy of the GNU General Public License
|
||
|
* along with this program; if not, write to the Free Software
|
||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
|
*
|
||
|
* 2004-08-06 Harald Welte <laforge@gnumonks.org>
|
||
|
* - Enable BREAK interrupt
|
||
|
* - Add support for sysreq
|
||
|
*
|
||
|
* TODO: - Add DMA support
|
||
|
* - Defer port shutdown to a few seconds after close
|
||
|
* - maybe put something right into uap->clk_divisor
|
||
|
*/
|
||
|
|
||
|
#undef DEBUG
|
||
|
#undef DEBUG_HARD
|
||
|
#undef USE_CTRL_O_SYSRQ
|
||
|
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/tty.h>
|
||
|
|
||
|
#include <linux/tty_flip.h>
|
||
|
#include <linux/major.h>
|
||
|
#include <linux/string.h>
|
||
|
#include <linux/fcntl.h>
|
||
|
#include <linux/mm.h>
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/init.h>
|
||
|
#include <linux/console.h>
|
||
|
#include <linux/adb.h>
|
||
|
#include <linux/pmu.h>
|
||
|
#include <linux/bitops.h>
|
||
|
#include <linux/sysrq.h>
|
||
|
#include <linux/mutex.h>
|
||
|
#include <asm/sections.h>
|
||
|
#include <asm/io.h>
|
||
|
#include <asm/irq.h>
|
||
|
|
||
|
#ifdef CONFIG_PPC_PMAC
|
||
|
#include <asm/prom.h>
|
||
|
#include <asm/machdep.h>
|
||
|
#include <asm/pmac_feature.h>
|
||
|
#include <asm/dbdma.h>
|
||
|
#include <asm/macio.h>
|
||
|
#else
|
||
|
#include <linux/platform_device.h>
|
||
|
#define of_machine_is_compatible(x) (0)
|
||
|
#endif
|
||
|
|
||
|
#if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
|
||
|
#define SUPPORT_SYSRQ
|
||
|
#endif
|
||
|
|
||
|
#include <linux/serial.h>
|
||
|
#include <linux/serial_core.h>
|
||
|
|
||
|
#include "pmac_zilog.h"
|
||
|
|
||
|
/* Not yet implemented */
|
||
|
#undef HAS_DBDMA
|
||
|
|
||
|
static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)";
|
||
|
MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
|
||
|
MODULE_DESCRIPTION("Driver for the Mac and PowerMac serial ports.");
|
||
|
MODULE_LICENSE("GPL");
|
||
|
|
||
|
#ifdef CONFIG_SERIAL_PMACZILOG_TTYS
|
||
|
#define PMACZILOG_MAJOR TTY_MAJOR
|
||
|
#define PMACZILOG_MINOR 64
|
||
|
#define PMACZILOG_NAME "ttyS"
|
||
|
#else
|
||
|
#define PMACZILOG_MAJOR 204
|
||
|
#define PMACZILOG_MINOR 192
|
||
|
#define PMACZILOG_NAME "ttyPZ"
|
||
|
#endif
|
||
|
|
||
|
|
||
|
/*
|
||
|
* For the sake of early serial console, we can do a pre-probe
|
||
|
* (optional) of the ports at rather early boot time.
|
||
|
*/
|
||
|
static struct uart_pmac_port pmz_ports[MAX_ZS_PORTS];
|
||
|
static int pmz_ports_count;
|
||
|
static DEFINE_MUTEX(pmz_irq_mutex);
|
||
|
|
||
|
static struct uart_driver pmz_uart_reg = {
|
||
|
.owner = THIS_MODULE,
|
||
|
.driver_name = PMACZILOG_NAME,
|
||
|
.dev_name = PMACZILOG_NAME,
|
||
|
.major = PMACZILOG_MAJOR,
|
||
|
.minor = PMACZILOG_MINOR,
|
||
|
};
|
||
|
|
||
|
|
||
|
/*
|
||
|
* Load all registers to reprogram the port
|
||
|
* This function must only be called when the TX is not busy. The UART
|
||
|
* port lock must be held and local interrupts disabled.
|
||
|
*/
|
||
|
static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
if (ZS_IS_ASLEEP(uap))
|
||
|
return;
|
||
|
|
||
|
/* Let pending transmits finish. */
|
||
|
for (i = 0; i < 1000; i++) {
|
||
|
unsigned char stat = read_zsreg(uap, R1);
|
||
|
if (stat & ALL_SNT)
|
||
|
break;
|
||
|
udelay(100);
|
||
|
}
|
||
|
|
||
|
ZS_CLEARERR(uap);
|
||
|
zssync(uap);
|
||
|
ZS_CLEARFIFO(uap);
|
||
|
zssync(uap);
|
||
|
ZS_CLEARERR(uap);
|
||
|
|
||
|
/* Disable all interrupts. */
|
||
|
write_zsreg(uap, R1,
|
||
|
regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB));
|
||
|
|
||
|
/* Set parity, sync config, stop bits, and clock divisor. */
|
||
|
write_zsreg(uap, R4, regs[R4]);
|
||
|
|
||
|
/* Set misc. TX/RX control bits. */
|
||
|
write_zsreg(uap, R10, regs[R10]);
|
||
|
|
||
|
/* Set TX/RX controls sans the enable bits. */
|
||
|
write_zsreg(uap, R3, regs[R3] & ~RxENABLE);
|
||
|
write_zsreg(uap, R5, regs[R5] & ~TxENABLE);
|
||
|
|
||
|
/* now set R7 "prime" on ESCC */
|
||
|
write_zsreg(uap, R15, regs[R15] | EN85C30);
|
||
|
write_zsreg(uap, R7, regs[R7P]);
|
||
|
|
||
|
/* make sure we use R7 "non-prime" on ESCC */
|
||
|
write_zsreg(uap, R15, regs[R15] & ~EN85C30);
|
||
|
|
||
|
/* Synchronous mode config. */
|
||
|
write_zsreg(uap, R6, regs[R6]);
|
||
|
write_zsreg(uap, R7, regs[R7]);
|
||
|
|
||
|
/* Disable baud generator. */
|
||
|
write_zsreg(uap, R14, regs[R14] & ~BRENAB);
|
||
|
|
||
|
/* Clock mode control. */
|
||
|
write_zsreg(uap, R11, regs[R11]);
|
||
|
|
||
|
/* Lower and upper byte of baud rate generator divisor. */
|
||
|
write_zsreg(uap, R12, regs[R12]);
|
||
|
write_zsreg(uap, R13, regs[R13]);
|
||
|
|
||
|
/* Now rewrite R14, with BRENAB (if set). */
|
||
|
write_zsreg(uap, R14, regs[R14]);
|
||
|
|
||
|
/* Reset external status interrupts. */
|
||
|
write_zsreg(uap, R0, RES_EXT_INT);
|
||
|
write_zsreg(uap, R0, RES_EXT_INT);
|
||
|
|
||
|
/* Rewrite R3/R5, this time without enables masked. */
|
||
|
write_zsreg(uap, R3, regs[R3]);
|
||
|
write_zsreg(uap, R5, regs[R5]);
|
||
|
|
||
|
/* Rewrite R1, this time without IRQ enabled masked. */
|
||
|
write_zsreg(uap, R1, regs[R1]);
|
||
|
|
||
|
/* Enable interrupts */
|
||
|
write_zsreg(uap, R9, regs[R9]);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* We do like sunzilog to avoid disrupting pending Tx
|
||
|
* Reprogram the Zilog channel HW registers with the copies found in the
|
||
|
* software state struct. If the transmitter is busy, we defer this update
|
||
|
* until the next TX complete interrupt. Else, we do it right now.
|
||
|
*
|
||
|
* The UART port lock must be held and local interrupts disabled.
|
||
|
*/
|
||
|
static void pmz_maybe_update_regs(struct uart_pmac_port *uap)
|
||
|
{
|
||
|
if (!ZS_REGS_HELD(uap)) {
|
||
|
if (ZS_TX_ACTIVE(uap)) {
|
||
|
uap->flags |= PMACZILOG_FLAG_REGS_HELD;
|
||
|
} else {
|
||
|
pmz_debug("pmz: maybe_update_regs: updating\n");
|
||
|
pmz_load_zsregs(uap, uap->curregs);
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
|
||
|
{
|
||
|
struct tty_struct *tty = NULL;
|
||
|
unsigned char ch, r1, drop, error, flag;
|
||
|
int loops = 0;
|
||
|
|
||
|
/* The interrupt can be enabled when the port isn't open, typically
|
||
|
* that happens when using one port is open and the other closed (stale
|
||
|
* interrupt) or when one port is used as a console.
|
||
|
*/
|
||
|
if (!ZS_IS_OPEN(uap)) {
|
||
|
pmz_debug("pmz: draining input\n");
|
||
|
/* Port is closed, drain input data */
|
||
|
for (;;) {
|
||
|
if ((++loops) > 1000)
|
||
|
goto flood;
|
||
|
(void)read_zsreg(uap, R1);
|
||
|
write_zsreg(uap, R0, ERR_RES);
|
||
|
(void)read_zsdata(uap);
|
||
|
ch = read_zsreg(uap, R0);
|
||
|
if (!(ch & Rx_CH_AV))
|
||
|
break;
|
||
|
}
|
||
|
return NULL;
|
||
|
}
|
||
|
|
||
|
/* Sanity check, make sure the old bug is no longer happening */
|
||
|
if (uap->port.state == NULL || uap->port.state->port.tty == NULL) {
|
||
|
WARN_ON(1);
|
||
|
(void)read_zsdata(uap);
|
||
|
return NULL;
|
||
|
}
|
||
|
tty = uap->port.state->port.tty;
|
||
|
|
||
|
while (1) {
|
||
|
error = 0;
|
||
|
drop = 0;
|
||
|
|
||
|
r1 = read_zsreg(uap, R1);
|
||
|
ch = read_zsdata(uap);
|
||
|
|
||
|
if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
|
||
|
write_zsreg(uap, R0, ERR_RES);
|
||
|
zssync(uap);
|
||
|
}
|
||
|
|
||
|
ch &= uap->parity_mask;
|
||
|
if (ch == 0 && uap->flags & PMACZILOG_FLAG_BREAK) {
|
||
|
uap->flags &= ~PMACZILOG_FLAG_BREAK;
|
||
|
}
|
||
|
|
||
|
#if defined(CONFIG_MAGIC_SYSRQ) && defined(CONFIG_SERIAL_CORE_CONSOLE)
|
||
|
#ifdef USE_CTRL_O_SYSRQ
|
||
|
/* Handle the SysRq ^O Hack */
|
||
|
if (ch == '\x0f') {
|
||
|
uap->port.sysrq = jiffies + HZ*5;
|
||
|
goto next_char;
|
||
|
}
|
||
|
#endif /* USE_CTRL_O_SYSRQ */
|
||
|
if (uap->port.sysrq) {
|
||
|
int swallow;
|
||
|
spin_unlock(&uap->port.lock);
|
||
|
swallow = uart_handle_sysrq_char(&uap->port, ch);
|
||
|
spin_lock(&uap->port.lock);
|
||
|
if (swallow)
|
||
|
goto next_char;
|
||
|
}
|
||
|
#endif /* CONFIG_MAGIC_SYSRQ && CONFIG_SERIAL_CORE_CONSOLE */
|
||
|
|
||
|
/* A real serial line, record the character and status. */
|
||
|
if (drop)
|
||
|
goto next_char;
|
||
|
|
||
|
flag = TTY_NORMAL;
|
||
|
uap->port.icount.rx++;
|
||
|
|
||
|
if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | BRK_ABRT)) {
|
||
|
error = 1;
|
||
|
if (r1 & BRK_ABRT) {
|
||
|
pmz_debug("pmz: got break !\n");
|
||
|
r1 &= ~(PAR_ERR | CRC_ERR);
|
||
|
uap->port.icount.brk++;
|
||
|
if (uart_handle_break(&uap->port))
|
||
|
goto next_char;
|
||
|
}
|
||
|
else if (r1 & PAR_ERR)
|
||
|
uap->port.icount.parity++;
|
||
|
else if (r1 & CRC_ERR)
|
||
|
uap->port.icount.frame++;
|
||
|
if (r1 & Rx_OVR)
|
||
|
uap->port.icount.overrun++;
|
||
|
r1 &= uap->port.read_status_mask;
|
||
|
if (r1 & BRK_ABRT)
|
||
|
flag = TTY_BREAK;
|
||
|
else if (r1 & PAR_ERR)
|
||
|
flag = TTY_PARITY;
|
||
|
else if (r1 & CRC_ERR)
|
||
|
flag = TTY_FRAME;
|
||
|
}
|
||
|
|
||
|
if (uap->port.ignore_status_mask == 0xff ||
|
||
|
(r1 & uap->port.ignore_status_mask) == 0) {
|
||
|
tty_insert_flip_char(tty, ch, flag);
|
||
|
}
|
||
|
if (r1 & Rx_OVR)
|
||
|
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
|
||
|
next_char:
|
||
|
/* We can get stuck in an infinite loop getting char 0 when the
|
||
|
* line is in a wrong HW state, we break that here.
|
||
|
* When that happens, I disable the receive side of the driver.
|
||
|
* Note that what I've been experiencing is a real irq loop where
|
||
|
* I'm getting flooded regardless of the actual port speed.
|
||
|
* Something stange is going on with the HW
|
||
|
*/
|
||
|
if ((++loops) > 1000)
|
||
|
goto flood;
|
||
|
ch = read_zsreg(uap, R0);
|
||
|
if (!(ch & Rx_CH_AV))
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
return tty;
|
||
|
flood:
|
||
|
uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
|
||
|
write_zsreg(uap, R1, uap->curregs[R1]);
|
||
|
zssync(uap);
|
||
|
pmz_error("pmz: rx irq flood !\n");
|
||
|
return tty;
|
||
|
}
|
||
|
|
||
|
static void pmz_status_handle(struct uart_pmac_port *uap)
|
||
|
{
|
||
|
unsigned char status;
|
||
|
|
||
|
status = read_zsreg(uap, R0);
|
||
|
write_zsreg(uap, R0, RES_EXT_INT);
|
||
|
zssync(uap);
|
||
|
|
||
|
if (ZS_IS_OPEN(uap) && ZS_WANTS_MODEM_STATUS(uap)) {
|
||
|
if (status & SYNC_HUNT)
|
||
|
uap->port.icount.dsr++;
|
||
|
|
||
|
/* The Zilog just gives us an interrupt when DCD/CTS/etc. change.
|
||
|
* But it does not tell us which bit has changed, we have to keep
|
||
|
* track of this ourselves.
|
||
|
* The CTS input is inverted for some reason. -- paulus
|
||
|
*/
|
||
|
if ((status ^ uap->prev_status) & DCD)
|
||
|
uart_handle_dcd_change(&uap->port,
|
||
|
(status & DCD));
|
||
|
if ((status ^ uap->prev_status) & CTS)
|
||
|
uart_handle_cts_change(&uap->port,
|
||
|
!(status & CTS));
|
||
|
|
||
|
wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
|
||
|
}
|
||
|
|
||
|
if (status & BRK_ABRT)
|
||
|
uap->flags |= PMACZILOG_FLAG_BREAK;
|
||
|
|
||
|
uap->prev_status = status;
|
||
|
}
|
||
|
|
||
|
static void pmz_transmit_chars(struct uart_pmac_port *uap)
|
||
|
{
|
||
|
struct circ_buf *xmit;
|
||
|
|
||
|
if (ZS_IS_ASLEEP(uap))
|
||
|
return;
|
||
|
if (ZS_IS_CONS(uap)) {
|
||
|
unsigned char status = read_zsreg(uap, R0);
|
||
|
|
||
|
/* TX still busy? Just wait for the next TX done interrupt.
|
||
|
*
|
||
|
* It can occur because of how we do serial console writes. It would
|
||
|
* be nice to transmit console writes just like we normally would for
|
||
|
* a TTY line. (ie. buffered and TX interrupt driven). That is not
|
||
|
* easy because console writes cannot sleep. One solution might be
|
||
|
* to poll on enough port->xmit space becomming free. -DaveM
|
||
|
*/
|
||
|
if (!(status & Tx_BUF_EMP))
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
uap->flags &= ~PMACZILOG_FLAG_TX_ACTIVE;
|
||
|
|
||
|
if (ZS_REGS_HELD(uap)) {
|
||
|
pmz_load_zsregs(uap, uap->curregs);
|
||
|
uap->flags &= ~PMACZILOG_FLAG_REGS_HELD;
|
||
|
}
|
||
|
|
||
|
if (ZS_TX_STOPPED(uap)) {
|
||
|
uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED;
|
||
|
goto ack_tx_int;
|
||
|
}
|
||
|
|
||
|
/* Under some circumstances, we see interrupts reported for
|
||
|
* a closed channel. The interrupt mask in R1 is clear, but
|
||
|
* R3 still signals the interrupts and we see them when taking
|
||
|
* an interrupt for the other channel (this could be a qemu
|
||
|
* bug but since the ESCC doc doesn't specify precsiely whether
|
||
|
* R3 interrup status bits are masked by R1 interrupt enable
|
||
|
* bits, better safe than sorry). --BenH.
|
||
|
*/
|
||
|
if (!ZS_IS_OPEN(uap))
|
||
|
goto ack_tx_int;
|
||
|
|
||
|
if (uap->port.x_char) {
|
||
|
uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
|
||
|
write_zsdata(uap, uap->port.x_char);
|
||
|
zssync(uap);
|
||
|
uap->port.icount.tx++;
|
||
|
uap->port.x_char = 0;
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
if (uap->port.state == NULL)
|
||
|
goto ack_tx_int;
|
||
|
xmit = &uap->port.state->xmit;
|
||
|
if (uart_circ_empty(xmit)) {
|
||
|
uart_write_wakeup(&uap->port);
|
||
|
goto ack_tx_int;
|
||
|
}
|
||
|
if (uart_tx_stopped(&uap->port))
|
||
|
goto ack_tx_int;
|
||
|
|
||
|
uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
|
||
|
write_zsdata(uap, xmit->buf[xmit->tail]);
|
||
|
zssync(uap);
|
||
|
|
||
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
||
|
uap->port.icount.tx++;
|
||
|
|
||
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
||
|
uart_write_wakeup(&uap->port);
|
||
|
|
||
|
return;
|
||
|
|
||
|
ack_tx_int:
|
||
|
write_zsreg(uap, R0, RES_Tx_P);
|
||
|
zssync(uap);
|
||
|
}
|
||
|
|
||
|
/* Hrm... we register that twice, fixme later.... */
|
||
|
static irqreturn_t pmz_interrupt(int irq, void *dev_id)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = dev_id;
|
||
|
struct uart_pmac_port *uap_a;
|
||
|
struct uart_pmac_port *uap_b;
|
||
|
int rc = IRQ_NONE;
|
||
|
struct tty_struct *tty;
|
||
|
u8 r3;
|
||
|
|
||
|
uap_a = pmz_get_port_A(uap);
|
||
|
uap_b = uap_a->mate;
|
||
|
|
||
|
spin_lock(&uap_a->port.lock);
|
||
|
r3 = read_zsreg(uap_a, R3);
|
||
|
|
||
|
#ifdef DEBUG_HARD
|
||
|
pmz_debug("irq, r3: %x\n", r3);
|
||
|
#endif
|
||
|
/* Channel A */
|
||
|
tty = NULL;
|
||
|
if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
|
||
|
write_zsreg(uap_a, R0, RES_H_IUS);
|
||
|
zssync(uap_a);
|
||
|
if (r3 & CHAEXT)
|
||
|
pmz_status_handle(uap_a);
|
||
|
if (r3 & CHARxIP)
|
||
|
tty = pmz_receive_chars(uap_a);
|
||
|
if (r3 & CHATxIP)
|
||
|
pmz_transmit_chars(uap_a);
|
||
|
rc = IRQ_HANDLED;
|
||
|
}
|
||
|
spin_unlock(&uap_a->port.lock);
|
||
|
if (tty != NULL)
|
||
|
tty_flip_buffer_push(tty);
|
||
|
|
||
|
if (uap_b->node == NULL)
|
||
|
goto out;
|
||
|
|
||
|
spin_lock(&uap_b->port.lock);
|
||
|
tty = NULL;
|
||
|
if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
|
||
|
write_zsreg(uap_b, R0, RES_H_IUS);
|
||
|
zssync(uap_b);
|
||
|
if (r3 & CHBEXT)
|
||
|
pmz_status_handle(uap_b);
|
||
|
if (r3 & CHBRxIP)
|
||
|
tty = pmz_receive_chars(uap_b);
|
||
|
if (r3 & CHBTxIP)
|
||
|
pmz_transmit_chars(uap_b);
|
||
|
rc = IRQ_HANDLED;
|
||
|
}
|
||
|
spin_unlock(&uap_b->port.lock);
|
||
|
if (tty != NULL)
|
||
|
tty_flip_buffer_push(tty);
|
||
|
|
||
|
out:
|
||
|
#ifdef DEBUG_HARD
|
||
|
pmz_debug("irq done.\n");
|
||
|
#endif
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Peek the status register, lock not held by caller
|
||
|
*/
|
||
|
static inline u8 pmz_peek_status(struct uart_pmac_port *uap)
|
||
|
{
|
||
|
unsigned long flags;
|
||
|
u8 status;
|
||
|
|
||
|
spin_lock_irqsave(&uap->port.lock, flags);
|
||
|
status = read_zsreg(uap, R0);
|
||
|
spin_unlock_irqrestore(&uap->port.lock, flags);
|
||
|
|
||
|
return status;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Check if transmitter is empty
|
||
|
* The port lock is not held.
|
||
|
*/
|
||
|
static unsigned int pmz_tx_empty(struct uart_port *port)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = to_pmz(port);
|
||
|
unsigned char status;
|
||
|
|
||
|
if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
|
||
|
return TIOCSER_TEMT;
|
||
|
|
||
|
status = pmz_peek_status(to_pmz(port));
|
||
|
if (status & Tx_BUF_EMP)
|
||
|
return TIOCSER_TEMT;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Set Modem Control (RTS & DTR) bits
|
||
|
* The port lock is held and interrupts are disabled.
|
||
|
* Note: Shall we really filter out RTS on external ports or
|
||
|
* should that be dealt at higher level only ?
|
||
|
*/
|
||
|
static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = to_pmz(port);
|
||
|
unsigned char set_bits, clear_bits;
|
||
|
|
||
|
/* Do nothing for irda for now... */
|
||
|
if (ZS_IS_IRDA(uap))
|
||
|
return;
|
||
|
/* We get called during boot with a port not up yet */
|
||
|
if (ZS_IS_ASLEEP(uap) ||
|
||
|
!(ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)))
|
||
|
return;
|
||
|
|
||
|
set_bits = clear_bits = 0;
|
||
|
|
||
|
if (ZS_IS_INTMODEM(uap)) {
|
||
|
if (mctrl & TIOCM_RTS)
|
||
|
set_bits |= RTS;
|
||
|
else
|
||
|
clear_bits |= RTS;
|
||
|
}
|
||
|
if (mctrl & TIOCM_DTR)
|
||
|
set_bits |= DTR;
|
||
|
else
|
||
|
clear_bits |= DTR;
|
||
|
|
||
|
/* NOTE: Not subject to 'transmitter active' rule. */
|
||
|
uap->curregs[R5] |= set_bits;
|
||
|
uap->curregs[R5] &= ~clear_bits;
|
||
|
if (ZS_IS_ASLEEP(uap))
|
||
|
return;
|
||
|
write_zsreg(uap, R5, uap->curregs[R5]);
|
||
|
pmz_debug("pmz_set_mctrl: set bits: %x, clear bits: %x -> %x\n",
|
||
|
set_bits, clear_bits, uap->curregs[R5]);
|
||
|
zssync(uap);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Get Modem Control bits (only the input ones, the core will
|
||
|
* or that with a cached value of the control ones)
|
||
|
* The port lock is held and interrupts are disabled.
|
||
|
*/
|
||
|
static unsigned int pmz_get_mctrl(struct uart_port *port)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = to_pmz(port);
|
||
|
unsigned char status;
|
||
|
unsigned int ret;
|
||
|
|
||
|
if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
|
||
|
return 0;
|
||
|
|
||
|
status = read_zsreg(uap, R0);
|
||
|
|
||
|
ret = 0;
|
||
|
if (status & DCD)
|
||
|
ret |= TIOCM_CAR;
|
||
|
if (status & SYNC_HUNT)
|
||
|
ret |= TIOCM_DSR;
|
||
|
if (!(status & CTS))
|
||
|
ret |= TIOCM_CTS;
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Stop TX side. Dealt like sunzilog at next Tx interrupt,
|
||
|
* though for DMA, we will have to do a bit more.
|
||
|
* The port lock is held and interrupts are disabled.
|
||
|
*/
|
||
|
static void pmz_stop_tx(struct uart_port *port)
|
||
|
{
|
||
|
to_pmz(port)->flags |= PMACZILOG_FLAG_TX_STOPPED;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Kick the Tx side.
|
||
|
* The port lock is held and interrupts are disabled.
|
||
|
*/
|
||
|
static void pmz_start_tx(struct uart_port *port)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = to_pmz(port);
|
||
|
unsigned char status;
|
||
|
|
||
|
pmz_debug("pmz: start_tx()\n");
|
||
|
|
||
|
uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
|
||
|
uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED;
|
||
|
|
||
|
if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
|
||
|
return;
|
||
|
|
||
|
status = read_zsreg(uap, R0);
|
||
|
|
||
|
/* TX busy? Just wait for the TX done interrupt. */
|
||
|
if (!(status & Tx_BUF_EMP))
|
||
|
return;
|
||
|
|
||
|
/* Send the first character to jump-start the TX done
|
||
|
* IRQ sending engine.
|
||
|
*/
|
||
|
if (port->x_char) {
|
||
|
write_zsdata(uap, port->x_char);
|
||
|
zssync(uap);
|
||
|
port->icount.tx++;
|
||
|
port->x_char = 0;
|
||
|
} else {
|
||
|
struct circ_buf *xmit = &port->state->xmit;
|
||
|
|
||
|
write_zsdata(uap, xmit->buf[xmit->tail]);
|
||
|
zssync(uap);
|
||
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
||
|
port->icount.tx++;
|
||
|
|
||
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
||
|
uart_write_wakeup(&uap->port);
|
||
|
}
|
||
|
pmz_debug("pmz: start_tx() done.\n");
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Stop Rx side, basically disable emitting of
|
||
|
* Rx interrupts on the port. We don't disable the rx
|
||
|
* side of the chip proper though
|
||
|
* The port lock is held.
|
||
|
*/
|
||
|
static void pmz_stop_rx(struct uart_port *port)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = to_pmz(port);
|
||
|
|
||
|
if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
|
||
|
return;
|
||
|
|
||
|
pmz_debug("pmz: stop_rx()()\n");
|
||
|
|
||
|
/* Disable all RX interrupts. */
|
||
|
uap->curregs[R1] &= ~RxINT_MASK;
|
||
|
pmz_maybe_update_regs(uap);
|
||
|
|
||
|
pmz_debug("pmz: stop_rx() done.\n");
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Enable modem status change interrupts
|
||
|
* The port lock is held.
|
||
|
*/
|
||
|
static void pmz_enable_ms(struct uart_port *port)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = to_pmz(port);
|
||
|
unsigned char new_reg;
|
||
|
|
||
|
if (ZS_IS_IRDA(uap) || uap->node == NULL)
|
||
|
return;
|
||
|
new_reg = uap->curregs[R15] | (DCDIE | SYNCIE | CTSIE);
|
||
|
if (new_reg != uap->curregs[R15]) {
|
||
|
uap->curregs[R15] = new_reg;
|
||
|
|
||
|
if (ZS_IS_ASLEEP(uap))
|
||
|
return;
|
||
|
/* NOTE: Not subject to 'transmitter active' rule. */
|
||
|
write_zsreg(uap, R15, uap->curregs[R15]);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Control break state emission
|
||
|
* The port lock is not held.
|
||
|
*/
|
||
|
static void pmz_break_ctl(struct uart_port *port, int break_state)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = to_pmz(port);
|
||
|
unsigned char set_bits, clear_bits, new_reg;
|
||
|
unsigned long flags;
|
||
|
|
||
|
if (uap->node == NULL)
|
||
|
return;
|
||
|
set_bits = clear_bits = 0;
|
||
|
|
||
|
if (break_state)
|
||
|
set_bits |= SND_BRK;
|
||
|
else
|
||
|
clear_bits |= SND_BRK;
|
||
|
|
||
|
spin_lock_irqsave(&port->lock, flags);
|
||
|
|
||
|
new_reg = (uap->curregs[R5] | set_bits) & ~clear_bits;
|
||
|
if (new_reg != uap->curregs[R5]) {
|
||
|
uap->curregs[R5] = new_reg;
|
||
|
|
||
|
/* NOTE: Not subject to 'transmitter active' rule. */
|
||
|
if (ZS_IS_ASLEEP(uap)) {
|
||
|
spin_unlock_irqrestore(&port->lock, flags);
|
||
|
return;
|
||
|
}
|
||
|
write_zsreg(uap, R5, uap->curregs[R5]);
|
||
|
}
|
||
|
|
||
|
spin_unlock_irqrestore(&port->lock, flags);
|
||
|
}
|
||
|
|
||
|
#ifdef CONFIG_PPC_PMAC
|
||
|
|
||
|
/*
|
||
|
* Turn power on or off to the SCC and associated stuff
|
||
|
* (port drivers, modem, IR port, etc.)
|
||
|
* Returns the number of milliseconds we should wait before
|
||
|
* trying to use the port.
|
||
|
*/
|
||
|
static int pmz_set_scc_power(struct uart_pmac_port *uap, int state)
|
||
|
{
|
||
|
int delay = 0;
|
||
|
int rc;
|
||
|
|
||
|
if (state) {
|
||
|
rc = pmac_call_feature(
|
||
|
PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 1);
|
||
|
pmz_debug("port power on result: %d\n", rc);
|
||
|
if (ZS_IS_INTMODEM(uap)) {
|
||
|
rc = pmac_call_feature(
|
||
|
PMAC_FTR_MODEM_ENABLE, uap->node, 0, 1);
|
||
|
delay = 2500; /* wait for 2.5s before using */
|
||
|
pmz_debug("modem power result: %d\n", rc);
|
||
|
}
|
||
|
} else {
|
||
|
/* TODO: Make that depend on a timer, don't power down
|
||
|
* immediately
|
||
|
*/
|
||
|
if (ZS_IS_INTMODEM(uap)) {
|
||
|
rc = pmac_call_feature(
|
||
|
PMAC_FTR_MODEM_ENABLE, uap->node, 0, 0);
|
||
|
pmz_debug("port power off result: %d\n", rc);
|
||
|
}
|
||
|
pmac_call_feature(PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 0);
|
||
|
}
|
||
|
return delay;
|
||
|
}
|
||
|
|
||
|
#else
|
||
|
|
||
|
static int pmz_set_scc_power(struct uart_pmac_port *uap, int state)
|
||
|
{
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
#endif /* !CONFIG_PPC_PMAC */
|
||
|
|
||
|
/*
|
||
|
* FixZeroBug....Works around a bug in the SCC receving channel.
|
||
|
* Inspired from Darwin code, 15 Sept. 2000 -DanM
|
||
|
*
|
||
|
* The following sequence prevents a problem that is seen with O'Hare ASICs
|
||
|
* (most versions -- also with some Heathrow and Hydra ASICs) where a zero
|
||
|
* at the input to the receiver becomes 'stuck' and locks up the receiver.
|
||
|
* This problem can occur as a result of a zero bit at the receiver input
|
||
|
* coincident with any of the following events:
|
||
|
*
|
||
|
* The SCC is initialized (hardware or software).
|
||
|
* A framing error is detected.
|
||
|
* The clocking option changes from synchronous or X1 asynchronous
|
||
|
* clocking to X16, X32, or X64 asynchronous clocking.
|
||
|
* The decoding mode is changed among NRZ, NRZI, FM0, or FM1.
|
||
|
*
|
||
|
* This workaround attempts to recover from the lockup condition by placing
|
||
|
* the SCC in synchronous loopback mode with a fast clock before programming
|
||
|
* any of the asynchronous modes.
|
||
|
*/
|
||
|
static void pmz_fix_zero_bug_scc(struct uart_pmac_port *uap)
|
||
|
{
|
||
|
write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB);
|
||
|
zssync(uap);
|
||
|
udelay(10);
|
||
|
write_zsreg(uap, 9, (ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB) | NV);
|
||
|
zssync(uap);
|
||
|
|
||
|
write_zsreg(uap, 4, X1CLK | MONSYNC);
|
||
|
write_zsreg(uap, 3, Rx8);
|
||
|
write_zsreg(uap, 5, Tx8 | RTS);
|
||
|
write_zsreg(uap, 9, NV); /* Didn't we already do this? */
|
||
|
write_zsreg(uap, 11, RCBR | TCBR);
|
||
|
write_zsreg(uap, 12, 0);
|
||
|
write_zsreg(uap, 13, 0);
|
||
|
write_zsreg(uap, 14, (LOOPBAK | BRSRC));
|
||
|
write_zsreg(uap, 14, (LOOPBAK | BRSRC | BRENAB));
|
||
|
write_zsreg(uap, 3, Rx8 | RxENABLE);
|
||
|
write_zsreg(uap, 0, RES_EXT_INT);
|
||
|
write_zsreg(uap, 0, RES_EXT_INT);
|
||
|
write_zsreg(uap, 0, RES_EXT_INT); /* to kill some time */
|
||
|
|
||
|
/* The channel should be OK now, but it is probably receiving
|
||
|
* loopback garbage.
|
||
|
* Switch to asynchronous mode, disable the receiver,
|
||
|
* and discard everything in the receive buffer.
|
||
|
*/
|
||
|
write_zsreg(uap, 9, NV);
|
||
|
write_zsreg(uap, 4, X16CLK | SB_MASK);
|
||
|
write_zsreg(uap, 3, Rx8);
|
||
|
|
||
|
while (read_zsreg(uap, 0) & Rx_CH_AV) {
|
||
|
(void)read_zsreg(uap, 8);
|
||
|
write_zsreg(uap, 0, RES_EXT_INT);
|
||
|
write_zsreg(uap, 0, ERR_RES);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Real startup routine, powers up the hardware and sets up
|
||
|
* the SCC. Returns a delay in ms where you need to wait before
|
||
|
* actually using the port, this is typically the internal modem
|
||
|
* powerup delay. This routine expect the lock to be taken.
|
||
|
*/
|
||
|
static int __pmz_startup(struct uart_pmac_port *uap)
|
||
|
{
|
||
|
int pwr_delay = 0;
|
||
|
|
||
|
memset(&uap->curregs, 0, sizeof(uap->curregs));
|
||
|
|
||
|
/* Power up the SCC & underlying hardware (modem/irda) */
|
||
|
pwr_delay = pmz_set_scc_power(uap, 1);
|
||
|
|
||
|
/* Nice buggy HW ... */
|
||
|
pmz_fix_zero_bug_scc(uap);
|
||
|
|
||
|
/* Reset the channel */
|
||
|
uap->curregs[R9] = 0;
|
||
|
write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB);
|
||
|
zssync(uap);
|
||
|
udelay(10);
|
||
|
write_zsreg(uap, 9, 0);
|
||
|
zssync(uap);
|
||
|
|
||
|
/* Clear the interrupt registers */
|
||
|
write_zsreg(uap, R1, 0);
|
||
|
write_zsreg(uap, R0, ERR_RES);
|
||
|
write_zsreg(uap, R0, ERR_RES);
|
||
|
write_zsreg(uap, R0, RES_H_IUS);
|
||
|
write_zsreg(uap, R0, RES_H_IUS);
|
||
|
|
||
|
/* Setup some valid baud rate */
|
||
|
uap->curregs[R4] = X16CLK | SB1;
|
||
|
uap->curregs[R3] = Rx8;
|
||
|
uap->curregs[R5] = Tx8 | RTS;
|
||
|
if (!ZS_IS_IRDA(uap))
|
||
|
uap->curregs[R5] |= DTR;
|
||
|
uap->curregs[R12] = 0;
|
||
|
uap->curregs[R13] = 0;
|
||
|
uap->curregs[R14] = BRENAB;
|
||
|
|
||
|
/* Clear handshaking, enable BREAK interrupts */
|
||
|
uap->curregs[R15] = BRKIE;
|
||
|
|
||
|
/* Master interrupt enable */
|
||
|
uap->curregs[R9] |= NV | MIE;
|
||
|
|
||
|
pmz_load_zsregs(uap, uap->curregs);
|
||
|
|
||
|
/* Enable receiver and transmitter. */
|
||
|
write_zsreg(uap, R3, uap->curregs[R3] |= RxENABLE);
|
||
|
write_zsreg(uap, R5, uap->curregs[R5] |= TxENABLE);
|
||
|
|
||
|
/* Remember status for DCD/CTS changes */
|
||
|
uap->prev_status = read_zsreg(uap, R0);
|
||
|
|
||
|
return pwr_delay;
|
||
|
}
|
||
|
|
||
|
static void pmz_irda_reset(struct uart_pmac_port *uap)
|
||
|
{
|
||
|
uap->curregs[R5] |= DTR;
|
||
|
write_zsreg(uap, R5, uap->curregs[R5]);
|
||
|
zssync(uap);
|
||
|
mdelay(110);
|
||
|
uap->curregs[R5] &= ~DTR;
|
||
|
write_zsreg(uap, R5, uap->curregs[R5]);
|
||
|
zssync(uap);
|
||
|
mdelay(10);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* This is the "normal" startup routine, using the above one
|
||
|
* wrapped with the lock and doing a schedule delay
|
||
|
*/
|
||
|
static int pmz_startup(struct uart_port *port)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = to_pmz(port);
|
||
|
unsigned long flags;
|
||
|
int pwr_delay = 0;
|
||
|
|
||
|
pmz_debug("pmz: startup()\n");
|
||
|
|
||
|
if (ZS_IS_ASLEEP(uap))
|
||
|
return -EAGAIN;
|
||
|
if (uap->node == NULL)
|
||
|
return -ENODEV;
|
||
|
|
||
|
mutex_lock(&pmz_irq_mutex);
|
||
|
|
||
|
uap->flags |= PMACZILOG_FLAG_IS_OPEN;
|
||
|
|
||
|
/* A console is never powered down. Else, power up and
|
||
|
* initialize the chip
|
||
|
*/
|
||
|
if (!ZS_IS_CONS(uap)) {
|
||
|
spin_lock_irqsave(&port->lock, flags);
|
||
|
pwr_delay = __pmz_startup(uap);
|
||
|
spin_unlock_irqrestore(&port->lock, flags);
|
||
|
}
|
||
|
|
||
|
pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
|
||
|
if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED,
|
||
|
"SCC", uap)) {
|
||
|
pmz_error("Unable to register zs interrupt handler.\n");
|
||
|
pmz_set_scc_power(uap, 0);
|
||
|
mutex_unlock(&pmz_irq_mutex);
|
||
|
return -ENXIO;
|
||
|
}
|
||
|
|
||
|
mutex_unlock(&pmz_irq_mutex);
|
||
|
|
||
|
/* Right now, we deal with delay by blocking here, I'll be
|
||
|
* smarter later on
|
||
|
*/
|
||
|
if (pwr_delay != 0) {
|
||
|
pmz_debug("pmz: delaying %d ms\n", pwr_delay);
|
||
|
msleep(pwr_delay);
|
||
|
}
|
||
|
|
||
|
/* IrDA reset is done now */
|
||
|
if (ZS_IS_IRDA(uap))
|
||
|
pmz_irda_reset(uap);
|
||
|
|
||
|
/* Enable interrupts emission from the chip */
|
||
|
spin_lock_irqsave(&port->lock, flags);
|
||
|
uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB;
|
||
|
if (!ZS_IS_EXTCLK(uap))
|
||
|
uap->curregs[R1] |= EXT_INT_ENAB;
|
||
|
write_zsreg(uap, R1, uap->curregs[R1]);
|
||
|
spin_unlock_irqrestore(&port->lock, flags);
|
||
|
|
||
|
pmz_debug("pmz: startup() done.\n");
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void pmz_shutdown(struct uart_port *port)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = to_pmz(port);
|
||
|
unsigned long flags;
|
||
|
|
||
|
pmz_debug("pmz: shutdown()\n");
|
||
|
|
||
|
if (uap->node == NULL)
|
||
|
return;
|
||
|
|
||
|
mutex_lock(&pmz_irq_mutex);
|
||
|
|
||
|
/* Release interrupt handler */
|
||
|
free_irq(uap->port.irq, uap);
|
||
|
|
||
|
spin_lock_irqsave(&port->lock, flags);
|
||
|
|
||
|
uap->flags &= ~PMACZILOG_FLAG_IS_OPEN;
|
||
|
|
||
|
if (!ZS_IS_OPEN(uap->mate))
|
||
|
pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON;
|
||
|
|
||
|
/* Disable interrupts */
|
||
|
if (!ZS_IS_ASLEEP(uap)) {
|
||
|
uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
|
||
|
write_zsreg(uap, R1, uap->curregs[R1]);
|
||
|
zssync(uap);
|
||
|
}
|
||
|
|
||
|
if (ZS_IS_CONS(uap) || ZS_IS_ASLEEP(uap)) {
|
||
|
spin_unlock_irqrestore(&port->lock, flags);
|
||
|
mutex_unlock(&pmz_irq_mutex);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
/* Disable receiver and transmitter. */
|
||
|
uap->curregs[R3] &= ~RxENABLE;
|
||
|
uap->curregs[R5] &= ~TxENABLE;
|
||
|
|
||
|
/* Disable all interrupts and BRK assertion. */
|
||
|
uap->curregs[R5] &= ~SND_BRK;
|
||
|
pmz_maybe_update_regs(uap);
|
||
|
|
||
|
/* Shut the chip down */
|
||
|
pmz_set_scc_power(uap, 0);
|
||
|
|
||
|
spin_unlock_irqrestore(&port->lock, flags);
|
||
|
|
||
|
mutex_unlock(&pmz_irq_mutex);
|
||
|
|
||
|
pmz_debug("pmz: shutdown() done.\n");
|
||
|
}
|
||
|
|
||
|
/* Shared by TTY driver and serial console setup. The port lock is held
|
||
|
* and local interrupts are disabled.
|
||
|
*/
|
||
|
static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag,
|
||
|
unsigned int iflag, unsigned long baud)
|
||
|
{
|
||
|
int brg;
|
||
|
|
||
|
/* Switch to external clocking for IrDA high clock rates. That
|
||
|
* code could be re-used for Midi interfaces with different
|
||
|
* multipliers
|
||
|
*/
|
||
|
if (baud >= 115200 && ZS_IS_IRDA(uap)) {
|
||
|
uap->curregs[R4] = X1CLK;
|
||
|
uap->curregs[R11] = RCTRxCP | TCTRxCP;
|
||
|
uap->curregs[R14] = 0; /* BRG off */
|
||
|
uap->curregs[R12] = 0;
|
||
|
uap->curregs[R13] = 0;
|
||
|
uap->flags |= PMACZILOG_FLAG_IS_EXTCLK;
|
||
|
} else {
|
||
|
switch (baud) {
|
||
|
case ZS_CLOCK/16: /* 230400 */
|
||
|
uap->curregs[R4] = X16CLK;
|
||
|
uap->curregs[R11] = 0;
|
||
|
uap->curregs[R14] = 0;
|
||
|
break;
|
||
|
case ZS_CLOCK/32: /* 115200 */
|
||
|
uap->curregs[R4] = X32CLK;
|
||
|
uap->curregs[R11] = 0;
|
||
|
uap->curregs[R14] = 0;
|
||
|
break;
|
||
|
default:
|
||
|
uap->curregs[R4] = X16CLK;
|
||
|
uap->curregs[R11] = TCBR | RCBR;
|
||
|
brg = BPS_TO_BRG(baud, ZS_CLOCK / 16);
|
||
|
uap->curregs[R12] = (brg & 255);
|
||
|
uap->curregs[R13] = ((brg >> 8) & 255);
|
||
|
uap->curregs[R14] = BRENAB;
|
||
|
}
|
||
|
uap->flags &= ~PMACZILOG_FLAG_IS_EXTCLK;
|
||
|
}
|
||
|
|
||
|
/* Character size, stop bits, and parity. */
|
||
|
uap->curregs[3] &= ~RxN_MASK;
|
||
|
uap->curregs[5] &= ~TxN_MASK;
|
||
|
|
||
|
switch (cflag & CSIZE) {
|
||
|
case CS5:
|
||
|
uap->curregs[3] |= Rx5;
|
||
|
uap->curregs[5] |= Tx5;
|
||
|
uap->parity_mask = 0x1f;
|
||
|
break;
|
||
|
case CS6:
|
||
|
uap->curregs[3] |= Rx6;
|
||
|
uap->curregs[5] |= Tx6;
|
||
|
uap->parity_mask = 0x3f;
|
||
|
break;
|
||
|
case CS7:
|
||
|
uap->curregs[3] |= Rx7;
|
||
|
uap->curregs[5] |= Tx7;
|
||
|
uap->parity_mask = 0x7f;
|
||
|
break;
|
||
|
case CS8:
|
||
|
default:
|
||
|
uap->curregs[3] |= Rx8;
|
||
|
uap->curregs[5] |= Tx8;
|
||
|
uap->parity_mask = 0xff;
|
||
|
break;
|
||
|
};
|
||
|
uap->curregs[4] &= ~(SB_MASK);
|
||
|
if (cflag & CSTOPB)
|
||
|
uap->curregs[4] |= SB2;
|
||
|
else
|
||
|
uap->curregs[4] |= SB1;
|
||
|
if (cflag & PARENB)
|
||
|
uap->curregs[4] |= PAR_ENAB;
|
||
|
else
|
||
|
uap->curregs[4] &= ~PAR_ENAB;
|
||
|
if (!(cflag & PARODD))
|
||
|
uap->curregs[4] |= PAR_EVEN;
|
||
|
else
|
||
|
uap->curregs[4] &= ~PAR_EVEN;
|
||
|
|
||
|
uap->port.read_status_mask = Rx_OVR;
|
||
|
if (iflag & INPCK)
|
||
|
uap->port.read_status_mask |= CRC_ERR | PAR_ERR;
|
||
|
if (iflag & (BRKINT | PARMRK))
|
||
|
uap->port.read_status_mask |= BRK_ABRT;
|
||
|
|
||
|
uap->port.ignore_status_mask = 0;
|
||
|
if (iflag & IGNPAR)
|
||
|
uap->port.ignore_status_mask |= CRC_ERR | PAR_ERR;
|
||
|
if (iflag & IGNBRK) {
|
||
|
uap->port.ignore_status_mask |= BRK_ABRT;
|
||
|
if (iflag & IGNPAR)
|
||
|
uap->port.ignore_status_mask |= Rx_OVR;
|
||
|
}
|
||
|
|
||
|
if ((cflag & CREAD) == 0)
|
||
|
uap->port.ignore_status_mask = 0xff;
|
||
|
}
|
||
|
|
||
|
|
||
|
/*
|
||
|
* Set the irda codec on the imac to the specified baud rate.
|
||
|
*/
|
||
|
static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
|
||
|
{
|
||
|
u8 cmdbyte;
|
||
|
int t, version;
|
||
|
|
||
|
switch (*baud) {
|
||
|
/* SIR modes */
|
||
|
case 2400:
|
||
|
cmdbyte = 0x53;
|
||
|
break;
|
||
|
case 4800:
|
||
|
cmdbyte = 0x52;
|
||
|
break;
|
||
|
case 9600:
|
||
|
cmdbyte = 0x51;
|
||
|
break;
|
||
|
case 19200:
|
||
|
cmdbyte = 0x50;
|
||
|
break;
|
||
|
case 38400:
|
||
|
cmdbyte = 0x4f;
|
||
|
break;
|
||
|
case 57600:
|
||
|
cmdbyte = 0x4e;
|
||
|
break;
|
||
|
case 115200:
|
||
|
cmdbyte = 0x4d;
|
||
|
break;
|
||
|
/* The FIR modes aren't really supported at this point, how
|
||
|
* do we select the speed ? via the FCR on KeyLargo ?
|
||
|
*/
|
||
|
case 1152000:
|
||
|
cmdbyte = 0;
|
||
|
break;
|
||
|
case 4000000:
|
||
|
cmdbyte = 0;
|
||
|
break;
|
||
|
default: /* 9600 */
|
||
|
cmdbyte = 0x51;
|
||
|
*baud = 9600;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
/* Wait for transmitter to drain */
|
||
|
t = 10000;
|
||
|
while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0
|
||
|
|| (read_zsreg(uap, R1) & ALL_SNT) == 0) {
|
||
|
if (--t <= 0) {
|
||
|
pmz_error("transmitter didn't drain\n");
|
||
|
return;
|
||
|
}
|
||
|
udelay(10);
|
||
|
}
|
||
|
|
||
|
/* Drain the receiver too */
|
||
|
t = 100;
|
||
|
(void)read_zsdata(uap);
|
||
|
(void)read_zsdata(uap);
|
||
|
(void)read_zsdata(uap);
|
||
|
mdelay(10);
|
||
|
while (read_zsreg(uap, R0) & Rx_CH_AV) {
|
||
|
read_zsdata(uap);
|
||
|
mdelay(10);
|
||
|
if (--t <= 0) {
|
||
|
pmz_error("receiver didn't drain\n");
|
||
|
return;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/* Switch to command mode */
|
||
|
uap->curregs[R5] |= DTR;
|
||
|
write_zsreg(uap, R5, uap->curregs[R5]);
|
||
|
zssync(uap);
|
||
|
mdelay(1);
|
||
|
|
||
|
/* Switch SCC to 19200 */
|
||
|
pmz_convert_to_zs(uap, CS8, 0, 19200);
|
||
|
pmz_load_zsregs(uap, uap->curregs);
|
||
|
mdelay(1);
|
||
|
|
||
|
/* Write get_version command byte */
|
||
|
write_zsdata(uap, 1);
|
||
|
t = 5000;
|
||
|
while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) {
|
||
|
if (--t <= 0) {
|
||
|
pmz_error("irda_setup timed out on get_version byte\n");
|
||
|
goto out;
|
||
|
}
|
||
|
udelay(10);
|
||
|
}
|
||
|
version = read_zsdata(uap);
|
||
|
|
||
|
if (version < 4) {
|
||
|
pmz_info("IrDA: dongle version %d not supported\n", version);
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
/* Send speed mode */
|
||
|
write_zsdata(uap, cmdbyte);
|
||
|
t = 5000;
|
||
|
while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) {
|
||
|
if (--t <= 0) {
|
||
|
pmz_error("irda_setup timed out on speed mode byte\n");
|
||
|
goto out;
|
||
|
}
|
||
|
udelay(10);
|
||
|
}
|
||
|
t = read_zsdata(uap);
|
||
|
if (t != cmdbyte)
|
||
|
pmz_error("irda_setup speed mode byte = %x (%x)\n", t, cmdbyte);
|
||
|
|
||
|
pmz_info("IrDA setup for %ld bps, dongle version: %d\n",
|
||
|
*baud, version);
|
||
|
|
||
|
(void)read_zsdata(uap);
|
||
|
(void)read_zsdata(uap);
|
||
|
(void)read_zsdata(uap);
|
||
|
|
||
|
out:
|
||
|
/* Switch back to data mode */
|
||
|
uap->curregs[R5] &= ~DTR;
|
||
|
write_zsreg(uap, R5, uap->curregs[R5]);
|
||
|
zssync(uap);
|
||
|
|
||
|
(void)read_zsdata(uap);
|
||
|
(void)read_zsdata(uap);
|
||
|
(void)read_zsdata(uap);
|
||
|
}
|
||
|
|
||
|
|
||
|
static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios,
|
||
|
struct ktermios *old)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = to_pmz(port);
|
||
|
unsigned long baud;
|
||
|
|
||
|
pmz_debug("pmz: set_termios()\n");
|
||
|
|
||
|
if (ZS_IS_ASLEEP(uap))
|
||
|
return;
|
||
|
|
||
|
memcpy(&uap->termios_cache, termios, sizeof(struct ktermios));
|
||
|
|
||
|
/* XXX Check which revs of machines actually allow 1 and 4Mb speeds
|
||
|
* on the IR dongle. Note that the IRTTY driver currently doesn't know
|
||
|
* about the FIR mode and high speed modes. So these are unused. For
|
||
|
* implementing proper support for these, we should probably add some
|
||
|
* DMA as well, at least on the Rx side, which isn't a simple thing
|
||
|
* at this point.
|
||
|
*/
|
||
|
if (ZS_IS_IRDA(uap)) {
|
||
|
/* Calc baud rate */
|
||
|
baud = uart_get_baud_rate(port, termios, old, 1200, 4000000);
|
||
|
pmz_debug("pmz: switch IRDA to %ld bauds\n", baud);
|
||
|
/* Cet the irda codec to the right rate */
|
||
|
pmz_irda_setup(uap, &baud);
|
||
|
/* Set final baud rate */
|
||
|
pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud);
|
||
|
pmz_load_zsregs(uap, uap->curregs);
|
||
|
zssync(uap);
|
||
|
} else {
|
||
|
baud = uart_get_baud_rate(port, termios, old, 1200, 230400);
|
||
|
pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud);
|
||
|
/* Make sure modem status interrupts are correctly configured */
|
||
|
if (UART_ENABLE_MS(&uap->port, termios->c_cflag)) {
|
||
|
uap->curregs[R15] |= DCDIE | SYNCIE | CTSIE;
|
||
|
uap->flags |= PMACZILOG_FLAG_MODEM_STATUS;
|
||
|
} else {
|
||
|
uap->curregs[R15] &= ~(DCDIE | SYNCIE | CTSIE);
|
||
|
uap->flags &= ~PMACZILOG_FLAG_MODEM_STATUS;
|
||
|
}
|
||
|
|
||
|
/* Load registers to the chip */
|
||
|
pmz_maybe_update_regs(uap);
|
||
|
}
|
||
|
uart_update_timeout(port, termios->c_cflag, baud);
|
||
|
|
||
|
pmz_debug("pmz: set_termios() done.\n");
|
||
|
}
|
||
|
|
||
|
/* The port lock is not held. */
|
||
|
static void pmz_set_termios(struct uart_port *port, struct ktermios *termios,
|
||
|
struct ktermios *old)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = to_pmz(port);
|
||
|
unsigned long flags;
|
||
|
|
||
|
spin_lock_irqsave(&port->lock, flags);
|
||
|
|
||
|
/* Disable IRQs on the port */
|
||
|
uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
|
||
|
write_zsreg(uap, R1, uap->curregs[R1]);
|
||
|
|
||
|
/* Setup new port configuration */
|
||
|
__pmz_set_termios(port, termios, old);
|
||
|
|
||
|
/* Re-enable IRQs on the port */
|
||
|
if (ZS_IS_OPEN(uap)) {
|
||
|
uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB;
|
||
|
if (!ZS_IS_EXTCLK(uap))
|
||
|
uap->curregs[R1] |= EXT_INT_ENAB;
|
||
|
write_zsreg(uap, R1, uap->curregs[R1]);
|
||
|
}
|
||
|
spin_unlock_irqrestore(&port->lock, flags);
|
||
|
}
|
||
|
|
||
|
static const char *pmz_type(struct uart_port *port)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = to_pmz(port);
|
||
|
|
||
|
if (ZS_IS_IRDA(uap))
|
||
|
return "Z85c30 ESCC - Infrared port";
|
||
|
else if (ZS_IS_INTMODEM(uap))
|
||
|
return "Z85c30 ESCC - Internal modem";
|
||
|
return "Z85c30 ESCC - Serial port";
|
||
|
}
|
||
|
|
||
|
/* We do not request/release mappings of the registers here, this
|
||
|
* happens at early serial probe time.
|
||
|
*/
|
||
|
static void pmz_release_port(struct uart_port *port)
|
||
|
{
|
||
|
}
|
||
|
|
||
|
static int pmz_request_port(struct uart_port *port)
|
||
|
{
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* These do not need to do anything interesting either. */
|
||
|
static void pmz_config_port(struct uart_port *port, int flags)
|
||
|
{
|
||
|
}
|
||
|
|
||
|
/* We do not support letting the user mess with the divisor, IRQ, etc. */
|
||
|
static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser)
|
||
|
{
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
#ifdef CONFIG_CONSOLE_POLL
|
||
|
|
||
|
static int pmz_poll_get_char(struct uart_port *port)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
|
||
|
|
||
|
while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0)
|
||
|
udelay(5);
|
||
|
return read_zsdata(uap);
|
||
|
}
|
||
|
|
||
|
static void pmz_poll_put_char(struct uart_port *port, unsigned char c)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
|
||
|
|
||
|
/* Wait for the transmit buffer to empty. */
|
||
|
while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
|
||
|
udelay(5);
|
||
|
write_zsdata(uap, c);
|
||
|
}
|
||
|
|
||
|
#endif /* CONFIG_CONSOLE_POLL */
|
||
|
|
||
|
static struct uart_ops pmz_pops = {
|
||
|
.tx_empty = pmz_tx_empty,
|
||
|
.set_mctrl = pmz_set_mctrl,
|
||
|
.get_mctrl = pmz_get_mctrl,
|
||
|
.stop_tx = pmz_stop_tx,
|
||
|
.start_tx = pmz_start_tx,
|
||
|
.stop_rx = pmz_stop_rx,
|
||
|
.enable_ms = pmz_enable_ms,
|
||
|
.break_ctl = pmz_break_ctl,
|
||
|
.startup = pmz_startup,
|
||
|
.shutdown = pmz_shutdown,
|
||
|
.set_termios = pmz_set_termios,
|
||
|
.type = pmz_type,
|
||
|
.release_port = pmz_release_port,
|
||
|
.request_port = pmz_request_port,
|
||
|
.config_port = pmz_config_port,
|
||
|
.verify_port = pmz_verify_port,
|
||
|
#ifdef CONFIG_CONSOLE_POLL
|
||
|
.poll_get_char = pmz_poll_get_char,
|
||
|
.poll_put_char = pmz_poll_put_char,
|
||
|
#endif
|
||
|
};
|
||
|
|
||
|
#ifdef CONFIG_PPC_PMAC
|
||
|
|
||
|
/*
|
||
|
* Setup one port structure after probing, HW is down at this point,
|
||
|
* Unlike sunzilog, we don't need to pre-init the spinlock as we don't
|
||
|
* register our console before uart_add_one_port() is called
|
||
|
*/
|
||
|
static int __init pmz_init_port(struct uart_pmac_port *uap)
|
||
|
{
|
||
|
struct device_node *np = uap->node;
|
||
|
const char *conn;
|
||
|
const struct slot_names_prop {
|
||
|
int count;
|
||
|
char name[1];
|
||
|
} *slots;
|
||
|
int len;
|
||
|
struct resource r_ports, r_rxdma, r_txdma;
|
||
|
|
||
|
/*
|
||
|
* Request & map chip registers
|
||
|
*/
|
||
|
if (of_address_to_resource(np, 0, &r_ports))
|
||
|
return -ENODEV;
|
||
|
uap->port.mapbase = r_ports.start;
|
||
|
uap->port.membase = ioremap(uap->port.mapbase, 0x1000);
|
||
|
|
||
|
uap->control_reg = uap->port.membase;
|
||
|
uap->data_reg = uap->control_reg + 0x10;
|
||
|
|
||
|
/*
|
||
|
* Request & map DBDMA registers
|
||
|
*/
|
||
|
#ifdef HAS_DBDMA
|
||
|
if (of_address_to_resource(np, 1, &r_txdma) == 0 &&
|
||
|
of_address_to_resource(np, 2, &r_rxdma) == 0)
|
||
|
uap->flags |= PMACZILOG_FLAG_HAS_DMA;
|
||
|
#else
|
||
|
memset(&r_txdma, 0, sizeof(struct resource));
|
||
|
memset(&r_rxdma, 0, sizeof(struct resource));
|
||
|
#endif
|
||
|
if (ZS_HAS_DMA(uap)) {
|
||
|
uap->tx_dma_regs = ioremap(r_txdma.start, 0x100);
|
||
|
if (uap->tx_dma_regs == NULL) {
|
||
|
uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
|
||
|
goto no_dma;
|
||
|
}
|
||
|
uap->rx_dma_regs = ioremap(r_rxdma.start, 0x100);
|
||
|
if (uap->rx_dma_regs == NULL) {
|
||
|
iounmap(uap->tx_dma_regs);
|
||
|
uap->tx_dma_regs = NULL;
|
||
|
uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
|
||
|
goto no_dma;
|
||
|
}
|
||
|
uap->tx_dma_irq = irq_of_parse_and_map(np, 1);
|
||
|
uap->rx_dma_irq = irq_of_parse_and_map(np, 2);
|
||
|
}
|
||
|
no_dma:
|
||
|
|
||
|
/*
|
||
|
* Detect port type
|
||
|
*/
|
||
|
if (of_device_is_compatible(np, "cobalt"))
|
||
|
uap->flags |= PMACZILOG_FLAG_IS_INTMODEM;
|
||
|
conn = of_get_property(np, "AAPL,connector", &len);
|
||
|
if (conn && (strcmp(conn, "infrared") == 0))
|
||
|
uap->flags |= PMACZILOG_FLAG_IS_IRDA;
|
||
|
uap->port_type = PMAC_SCC_ASYNC;
|
||
|
/* 1999 Powerbook G3 has slot-names property instead */
|
||
|
slots = of_get_property(np, "slot-names", &len);
|
||
|
if (slots && slots->count > 0) {
|
||
|
if (strcmp(slots->name, "IrDA") == 0)
|
||
|
uap->flags |= PMACZILOG_FLAG_IS_IRDA;
|
||
|
else if (strcmp(slots->name, "Modem") == 0)
|
||
|
uap->flags |= PMACZILOG_FLAG_IS_INTMODEM;
|
||
|
}
|
||
|
if (ZS_IS_IRDA(uap))
|
||
|
uap->port_type = PMAC_SCC_IRDA;
|
||
|
if (ZS_IS_INTMODEM(uap)) {
|
||
|
struct device_node* i2c_modem =
|
||
|
of_find_node_by_name(NULL, "i2c-modem");
|
||
|
if (i2c_modem) {
|
||
|
const char* mid =
|
||
|
of_get_property(i2c_modem, "modem-id", NULL);
|
||
|
if (mid) switch(*mid) {
|
||
|
case 0x04 :
|
||
|
case 0x05 :
|
||
|
case 0x07 :
|
||
|
case 0x08 :
|
||
|
case 0x0b :
|
||
|
case 0x0c :
|
||
|
uap->port_type = PMAC_SCC_I2S1;
|
||
|
}
|
||
|
printk(KERN_INFO "pmac_zilog: i2c-modem detected, id: %d\n",
|
||
|
mid ? (*mid) : 0);
|
||
|
of_node_put(i2c_modem);
|
||
|
} else {
|
||
|
printk(KERN_INFO "pmac_zilog: serial modem detected\n");
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Init remaining bits of "port" structure
|
||
|
*/
|
||
|
uap->port.iotype = UPIO_MEM;
|
||
|
uap->port.irq = irq_of_parse_and_map(np, 0);
|
||
|
uap->port.uartclk = ZS_CLOCK;
|
||
|
uap->port.fifosize = 1;
|
||
|
uap->port.ops = &pmz_pops;
|
||
|
uap->port.type = PORT_PMAC_ZILOG;
|
||
|
uap->port.flags = 0;
|
||
|
|
||
|
/*
|
||
|
* Fixup for the port on Gatwick for which the device-tree has
|
||
|
* missing interrupts. Normally, the macio_dev would contain
|
||
|
* fixed up interrupt info, but we use the device-tree directly
|
||
|
* here due to early probing so we need the fixup too.
|
||
|
*/
|
||
|
if (uap->port.irq == NO_IRQ &&
|
||
|
np->parent && np->parent->parent &&
|
||
|
of_device_is_compatible(np->parent->parent, "gatwick")) {
|
||
|
/* IRQs on gatwick are offset by 64 */
|
||
|
uap->port.irq = irq_create_mapping(NULL, 64 + 15);
|
||
|
uap->tx_dma_irq = irq_create_mapping(NULL, 64 + 4);
|
||
|
uap->rx_dma_irq = irq_create_mapping(NULL, 64 + 5);
|
||
|
}
|
||
|
|
||
|
/* Setup some valid baud rate information in the register
|
||
|
* shadows so we don't write crap there before baud rate is
|
||
|
* first initialized.
|
||
|
*/
|
||
|
pmz_convert_to_zs(uap, CS8, 0, 9600);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Get rid of a port on module removal
|
||
|
*/
|
||
|
static void pmz_dispose_port(struct uart_pmac_port *uap)
|
||
|
{
|
||
|
struct device_node *np;
|
||
|
|
||
|
np = uap->node;
|
||
|
iounmap(uap->rx_dma_regs);
|
||
|
iounmap(uap->tx_dma_regs);
|
||
|
iounmap(uap->control_reg);
|
||
|
uap->node = NULL;
|
||
|
of_node_put(np);
|
||
|
memset(uap, 0, sizeof(struct uart_pmac_port));
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Called upon match with an escc node in the device-tree.
|
||
|
*/
|
||
|
static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
/* Iterate the pmz_ports array to find a matching entry
|
||
|
*/
|
||
|
for (i = 0; i < MAX_ZS_PORTS; i++)
|
||
|
if (pmz_ports[i].node == mdev->ofdev.dev.of_node) {
|
||
|
struct uart_pmac_port *uap = &pmz_ports[i];
|
||
|
|
||
|
uap->dev = mdev;
|
||
|
dev_set_drvdata(&mdev->ofdev.dev, uap);
|
||
|
if (macio_request_resources(uap->dev, "pmac_zilog"))
|
||
|
printk(KERN_WARNING "%s: Failed to request resource"
|
||
|
", port still active\n",
|
||
|
uap->node->name);
|
||
|
else
|
||
|
uap->flags |= PMACZILOG_FLAG_RSRC_REQUESTED;
|
||
|
return 0;
|
||
|
}
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* That one should not be called, macio isn't really a hotswap device,
|
||
|
* we don't expect one of those serial ports to go away...
|
||
|
*/
|
||
|
static int pmz_detach(struct macio_dev *mdev)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
|
||
|
|
||
|
if (!uap)
|
||
|
return -ENODEV;
|
||
|
|
||
|
if (uap->flags & PMACZILOG_FLAG_RSRC_REQUESTED) {
|
||
|
macio_release_resources(uap->dev);
|
||
|
uap->flags &= ~PMACZILOG_FLAG_RSRC_REQUESTED;
|
||
|
}
|
||
|
dev_set_drvdata(&mdev->ofdev.dev, NULL);
|
||
|
uap->dev = NULL;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
|
||
|
static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
|
||
|
struct uart_state *state;
|
||
|
unsigned long flags;
|
||
|
|
||
|
if (uap == NULL) {
|
||
|
printk("HRM... pmz_suspend with NULL uap\n");
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
if (pm_state.event == mdev->ofdev.dev.power.power_state.event)
|
||
|
return 0;
|
||
|
|
||
|
pmz_debug("suspend, switching to state %d\n", pm_state.event);
|
||
|
|
||
|
state = pmz_uart_reg.state + uap->port.line;
|
||
|
|
||
|
mutex_lock(&pmz_irq_mutex);
|
||
|
mutex_lock(&state->port.mutex);
|
||
|
|
||
|
spin_lock_irqsave(&uap->port.lock, flags);
|
||
|
|
||
|
if (ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)) {
|
||
|
/* Disable receiver and transmitter. */
|
||
|
uap->curregs[R3] &= ~RxENABLE;
|
||
|
uap->curregs[R5] &= ~TxENABLE;
|
||
|
|
||
|
/* Disable all interrupts and BRK assertion. */
|
||
|
uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
|
||
|
uap->curregs[R5] &= ~SND_BRK;
|
||
|
pmz_load_zsregs(uap, uap->curregs);
|
||
|
uap->flags |= PMACZILOG_FLAG_IS_ASLEEP;
|
||
|
mb();
|
||
|
}
|
||
|
|
||
|
spin_unlock_irqrestore(&uap->port.lock, flags);
|
||
|
|
||
|
if (ZS_IS_OPEN(uap) || ZS_IS_OPEN(uap->mate))
|
||
|
if (ZS_IS_ASLEEP(uap->mate) && ZS_IS_IRQ_ON(pmz_get_port_A(uap))) {
|
||
|
pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON;
|
||
|
disable_irq(uap->port.irq);
|
||
|
}
|
||
|
|
||
|
if (ZS_IS_CONS(uap))
|
||
|
uap->port.cons->flags &= ~CON_ENABLED;
|
||
|
|
||
|
/* Shut the chip down */
|
||
|
pmz_set_scc_power(uap, 0);
|
||
|
|
||
|
mutex_unlock(&state->port.mutex);
|
||
|
mutex_unlock(&pmz_irq_mutex);
|
||
|
|
||
|
pmz_debug("suspend, switching complete\n");
|
||
|
|
||
|
mdev->ofdev.dev.power.power_state = pm_state;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
|
||
|
static int pmz_resume(struct macio_dev *mdev)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
|
||
|
struct uart_state *state;
|
||
|
unsigned long flags;
|
||
|
int pwr_delay = 0;
|
||
|
|
||
|
if (uap == NULL)
|
||
|
return 0;
|
||
|
|
||
|
if (mdev->ofdev.dev.power.power_state.event == PM_EVENT_ON)
|
||
|
return 0;
|
||
|
|
||
|
pmz_debug("resume, switching to state 0\n");
|
||
|
|
||
|
state = pmz_uart_reg.state + uap->port.line;
|
||
|
|
||
|
mutex_lock(&pmz_irq_mutex);
|
||
|
mutex_lock(&state->port.mutex);
|
||
|
|
||
|
spin_lock_irqsave(&uap->port.lock, flags);
|
||
|
if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) {
|
||
|
spin_unlock_irqrestore(&uap->port.lock, flags);
|
||
|
goto bail;
|
||
|
}
|
||
|
pwr_delay = __pmz_startup(uap);
|
||
|
|
||
|
/* Take care of config that may have changed while asleep */
|
||
|
__pmz_set_termios(&uap->port, &uap->termios_cache, NULL);
|
||
|
|
||
|
if (ZS_IS_OPEN(uap)) {
|
||
|
/* Enable interrupts */
|
||
|
uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB;
|
||
|
if (!ZS_IS_EXTCLK(uap))
|
||
|
uap->curregs[R1] |= EXT_INT_ENAB;
|
||
|
write_zsreg(uap, R1, uap->curregs[R1]);
|
||
|
}
|
||
|
|
||
|
spin_unlock_irqrestore(&uap->port.lock, flags);
|
||
|
|
||
|
if (ZS_IS_CONS(uap))
|
||
|
uap->port.cons->flags |= CON_ENABLED;
|
||
|
|
||
|
/* Re-enable IRQ on the controller */
|
||
|
if (ZS_IS_OPEN(uap) && !ZS_IS_IRQ_ON(pmz_get_port_A(uap))) {
|
||
|
pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
|
||
|
enable_irq(uap->port.irq);
|
||
|
}
|
||
|
|
||
|
bail:
|
||
|
mutex_unlock(&state->port.mutex);
|
||
|
mutex_unlock(&pmz_irq_mutex);
|
||
|
|
||
|
/* Right now, we deal with delay by blocking here, I'll be
|
||
|
* smarter later on
|
||
|
*/
|
||
|
if (pwr_delay != 0) {
|
||
|
pmz_debug("pmz: delaying %d ms\n", pwr_delay);
|
||
|
msleep(pwr_delay);
|
||
|
}
|
||
|
|
||
|
pmz_debug("resume, switching complete\n");
|
||
|
|
||
|
mdev->ofdev.dev.power.power_state.event = PM_EVENT_ON;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Probe all ports in the system and build the ports array, we register
|
||
|
* with the serial layer at this point, the macio-type probing is only
|
||
|
* used later to "attach" to the sysfs tree so we get power management
|
||
|
* events
|
||
|
*/
|
||
|
static int __init pmz_probe(void)
|
||
|
{
|
||
|
struct device_node *node_p, *node_a, *node_b, *np;
|
||
|
int count = 0;
|
||
|
int rc;
|
||
|
|
||
|
/*
|
||
|
* Find all escc chips in the system
|
||
|
*/
|
||
|
node_p = of_find_node_by_name(NULL, "escc");
|
||
|
while (node_p) {
|
||
|
/*
|
||
|
* First get channel A/B node pointers
|
||
|
*
|
||
|
* TODO: Add routines with proper locking to do that...
|
||
|
*/
|
||
|
node_a = node_b = NULL;
|
||
|
for (np = NULL; (np = of_get_next_child(node_p, np)) != NULL;) {
|
||
|
if (strncmp(np->name, "ch-a", 4) == 0)
|
||
|
node_a = of_node_get(np);
|
||
|
else if (strncmp(np->name, "ch-b", 4) == 0)
|
||
|
node_b = of_node_get(np);
|
||
|
}
|
||
|
if (!node_a && !node_b) {
|
||
|
of_node_put(node_a);
|
||
|
of_node_put(node_b);
|
||
|
printk(KERN_ERR "pmac_zilog: missing node %c for escc %s\n",
|
||
|
(!node_a) ? 'a' : 'b', node_p->full_name);
|
||
|
goto next;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Fill basic fields in the port structures
|
||
|
*/
|
||
|
pmz_ports[count].mate = &pmz_ports[count+1];
|
||
|
pmz_ports[count+1].mate = &pmz_ports[count];
|
||
|
pmz_ports[count].flags = PMACZILOG_FLAG_IS_CHANNEL_A;
|
||
|
pmz_ports[count].node = node_a;
|
||
|
pmz_ports[count+1].node = node_b;
|
||
|
pmz_ports[count].port.line = count;
|
||
|
pmz_ports[count+1].port.line = count+1;
|
||
|
|
||
|
/*
|
||
|
* Setup the ports for real
|
||
|
*/
|
||
|
rc = pmz_init_port(&pmz_ports[count]);
|
||
|
if (rc == 0 && node_b != NULL)
|
||
|
rc = pmz_init_port(&pmz_ports[count+1]);
|
||
|
if (rc != 0) {
|
||
|
of_node_put(node_a);
|
||
|
of_node_put(node_b);
|
||
|
memset(&pmz_ports[count], 0, sizeof(struct uart_pmac_port));
|
||
|
memset(&pmz_ports[count+1], 0, sizeof(struct uart_pmac_port));
|
||
|
goto next;
|
||
|
}
|
||
|
count += 2;
|
||
|
next:
|
||
|
node_p = of_find_node_by_name(node_p, "escc");
|
||
|
}
|
||
|
pmz_ports_count = count;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
#else
|
||
|
|
||
|
extern struct platform_device scc_a_pdev, scc_b_pdev;
|
||
|
|
||
|
static int __init pmz_init_port(struct uart_pmac_port *uap)
|
||
|
{
|
||
|
struct resource *r_ports;
|
||
|
int irq;
|
||
|
|
||
|
r_ports = platform_get_resource(uap->node, IORESOURCE_MEM, 0);
|
||
|
irq = platform_get_irq(uap->node, 0);
|
||
|
if (!r_ports || !irq)
|
||
|
return -ENODEV;
|
||
|
|
||
|
uap->port.mapbase = r_ports->start;
|
||
|
uap->port.membase = (unsigned char __iomem *) r_ports->start;
|
||
|
uap->port.iotype = UPIO_MEM;
|
||
|
uap->port.irq = irq;
|
||
|
uap->port.uartclk = ZS_CLOCK;
|
||
|
uap->port.fifosize = 1;
|
||
|
uap->port.ops = &pmz_pops;
|
||
|
uap->port.type = PORT_PMAC_ZILOG;
|
||
|
uap->port.flags = 0;
|
||
|
|
||
|
uap->control_reg = uap->port.membase;
|
||
|
uap->data_reg = uap->control_reg + 4;
|
||
|
uap->port_type = 0;
|
||
|
|
||
|
pmz_convert_to_zs(uap, CS8, 0, 9600);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int __init pmz_probe(void)
|
||
|
{
|
||
|
int err;
|
||
|
|
||
|
pmz_ports_count = 0;
|
||
|
|
||
|
pmz_ports[0].mate = &pmz_ports[1];
|
||
|
pmz_ports[0].port.line = 0;
|
||
|
pmz_ports[0].flags = PMACZILOG_FLAG_IS_CHANNEL_A;
|
||
|
pmz_ports[0].node = &scc_a_pdev;
|
||
|
err = pmz_init_port(&pmz_ports[0]);
|
||
|
if (err)
|
||
|
return err;
|
||
|
pmz_ports_count++;
|
||
|
|
||
|
pmz_ports[1].mate = &pmz_ports[0];
|
||
|
pmz_ports[1].port.line = 1;
|
||
|
pmz_ports[1].flags = 0;
|
||
|
pmz_ports[1].node = &scc_b_pdev;
|
||
|
err = pmz_init_port(&pmz_ports[1]);
|
||
|
if (err)
|
||
|
return err;
|
||
|
pmz_ports_count++;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void pmz_dispose_port(struct uart_pmac_port *uap)
|
||
|
{
|
||
|
memset(uap, 0, sizeof(struct uart_pmac_port));
|
||
|
}
|
||
|
|
||
|
static int __init pmz_attach(struct platform_device *pdev)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
for (i = 0; i < pmz_ports_count; i++)
|
||
|
if (pmz_ports[i].node == pdev)
|
||
|
return 0;
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
|
||
|
static int __exit pmz_detach(struct platform_device *pdev)
|
||
|
{
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
#endif /* !CONFIG_PPC_PMAC */
|
||
|
|
||
|
#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
|
||
|
|
||
|
static void pmz_console_write(struct console *con, const char *s, unsigned int count);
|
||
|
static int __init pmz_console_setup(struct console *co, char *options);
|
||
|
|
||
|
static struct console pmz_console = {
|
||
|
.name = PMACZILOG_NAME,
|
||
|
.write = pmz_console_write,
|
||
|
.device = uart_console_device,
|
||
|
.setup = pmz_console_setup,
|
||
|
.flags = CON_PRINTBUFFER,
|
||
|
.index = -1,
|
||
|
.data = &pmz_uart_reg,
|
||
|
};
|
||
|
|
||
|
#define PMACZILOG_CONSOLE &pmz_console
|
||
|
#else /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
|
||
|
#define PMACZILOG_CONSOLE (NULL)
|
||
|
#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
|
||
|
|
||
|
/*
|
||
|
* Register the driver, console driver and ports with the serial
|
||
|
* core
|
||
|
*/
|
||
|
static int __init pmz_register(void)
|
||
|
{
|
||
|
int i, rc;
|
||
|
|
||
|
pmz_uart_reg.nr = pmz_ports_count;
|
||
|
pmz_uart_reg.cons = PMACZILOG_CONSOLE;
|
||
|
|
||
|
/*
|
||
|
* Register this driver with the serial core
|
||
|
*/
|
||
|
rc = uart_register_driver(&pmz_uart_reg);
|
||
|
if (rc)
|
||
|
return rc;
|
||
|
|
||
|
/*
|
||
|
* Register each port with the serial core
|
||
|
*/
|
||
|
for (i = 0; i < pmz_ports_count; i++) {
|
||
|
struct uart_pmac_port *uport = &pmz_ports[i];
|
||
|
/* NULL node may happen on wallstreet */
|
||
|
if (uport->node != NULL)
|
||
|
rc = uart_add_one_port(&pmz_uart_reg, &uport->port);
|
||
|
if (rc)
|
||
|
goto err_out;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
err_out:
|
||
|
while (i-- > 0) {
|
||
|
struct uart_pmac_port *uport = &pmz_ports[i];
|
||
|
uart_remove_one_port(&pmz_uart_reg, &uport->port);
|
||
|
}
|
||
|
uart_unregister_driver(&pmz_uart_reg);
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
#ifdef CONFIG_PPC_PMAC
|
||
|
|
||
|
static struct of_device_id pmz_match[] =
|
||
|
{
|
||
|
{
|
||
|
.name = "ch-a",
|
||
|
},
|
||
|
{
|
||
|
.name = "ch-b",
|
||
|
},
|
||
|
{},
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE (of, pmz_match);
|
||
|
|
||
|
static struct macio_driver pmz_driver = {
|
||
|
.driver = {
|
||
|
.name = "pmac_zilog",
|
||
|
.owner = THIS_MODULE,
|
||
|
.of_match_table = pmz_match,
|
||
|
},
|
||
|
.probe = pmz_attach,
|
||
|
.remove = pmz_detach,
|
||
|
.suspend = pmz_suspend,
|
||
|
.resume = pmz_resume,
|
||
|
};
|
||
|
|
||
|
#else
|
||
|
|
||
|
static struct platform_driver pmz_driver = {
|
||
|
.remove = __exit_p(pmz_detach),
|
||
|
.driver = {
|
||
|
.name = "scc",
|
||
|
.owner = THIS_MODULE,
|
||
|
},
|
||
|
};
|
||
|
|
||
|
#endif /* !CONFIG_PPC_PMAC */
|
||
|
|
||
|
static int __init init_pmz(void)
|
||
|
{
|
||
|
int rc, i;
|
||
|
printk(KERN_INFO "%s\n", version);
|
||
|
|
||
|
/*
|
||
|
* First, we need to do a direct OF-based probe pass. We
|
||
|
* do that because we want serial console up before the
|
||
|
* macio stuffs calls us back, and since that makes it
|
||
|
* easier to pass the proper number of channels to
|
||
|
* uart_register_driver()
|
||
|
*/
|
||
|
if (pmz_ports_count == 0)
|
||
|
pmz_probe();
|
||
|
|
||
|
/*
|
||
|
* Bail early if no port found
|
||
|
*/
|
||
|
if (pmz_ports_count == 0)
|
||
|
return -ENODEV;
|
||
|
|
||
|
/*
|
||
|
* Now we register with the serial layer
|
||
|
*/
|
||
|
rc = pmz_register();
|
||
|
if (rc) {
|
||
|
printk(KERN_ERR
|
||
|
"pmac_zilog: Error registering serial device, disabling pmac_zilog.\n"
|
||
|
"pmac_zilog: Did another serial driver already claim the minors?\n");
|
||
|
/* effectively "pmz_unprobe()" */
|
||
|
for (i=0; i < pmz_ports_count; i++)
|
||
|
pmz_dispose_port(&pmz_ports[i]);
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Then we register the macio driver itself
|
||
|
*/
|
||
|
#ifdef CONFIG_PPC_PMAC
|
||
|
return macio_register_driver(&pmz_driver);
|
||
|
#else
|
||
|
return platform_driver_probe(&pmz_driver, pmz_attach);
|
||
|
#endif
|
||
|
}
|
||
|
|
||
|
static void __exit exit_pmz(void)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
#ifdef CONFIG_PPC_PMAC
|
||
|
/* Get rid of macio-driver (detach from macio) */
|
||
|
macio_unregister_driver(&pmz_driver);
|
||
|
#else
|
||
|
platform_driver_unregister(&pmz_driver);
|
||
|
#endif
|
||
|
|
||
|
for (i = 0; i < pmz_ports_count; i++) {
|
||
|
struct uart_pmac_port *uport = &pmz_ports[i];
|
||
|
if (uport->node != NULL) {
|
||
|
uart_remove_one_port(&pmz_uart_reg, &uport->port);
|
||
|
pmz_dispose_port(uport);
|
||
|
}
|
||
|
}
|
||
|
/* Unregister UART driver */
|
||
|
uart_unregister_driver(&pmz_uart_reg);
|
||
|
}
|
||
|
|
||
|
#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
|
||
|
|
||
|
static void pmz_console_putchar(struct uart_port *port, int ch)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
|
||
|
|
||
|
/* Wait for the transmit buffer to empty. */
|
||
|
while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
|
||
|
udelay(5);
|
||
|
write_zsdata(uap, ch);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Print a string to the serial port trying not to disturb
|
||
|
* any possible real use of the port...
|
||
|
*/
|
||
|
static void pmz_console_write(struct console *con, const char *s, unsigned int count)
|
||
|
{
|
||
|
struct uart_pmac_port *uap = &pmz_ports[con->index];
|
||
|
unsigned long flags;
|
||
|
|
||
|
if (ZS_IS_ASLEEP(uap))
|
||
|
return;
|
||
|
spin_lock_irqsave(&uap->port.lock, flags);
|
||
|
|
||
|
/* Turn of interrupts and enable the transmitter. */
|
||
|
write_zsreg(uap, R1, uap->curregs[1] & ~TxINT_ENAB);
|
||
|
write_zsreg(uap, R5, uap->curregs[5] | TxENABLE | RTS | DTR);
|
||
|
|
||
|
uart_console_write(&uap->port, s, count, pmz_console_putchar);
|
||
|
|
||
|
/* Restore the values in the registers. */
|
||
|
write_zsreg(uap, R1, uap->curregs[1]);
|
||
|
/* Don't disable the transmitter. */
|
||
|
|
||
|
spin_unlock_irqrestore(&uap->port.lock, flags);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Setup the serial console
|
||
|
*/
|
||
|
static int __init pmz_console_setup(struct console *co, char *options)
|
||
|
{
|
||
|
struct uart_pmac_port *uap;
|
||
|
struct uart_port *port;
|
||
|
int baud = 38400;
|
||
|
int bits = 8;
|
||
|
int parity = 'n';
|
||
|
int flow = 'n';
|
||
|
unsigned long pwr_delay;
|
||
|
|
||
|
/*
|
||
|
* XServe's default to 57600 bps
|
||
|
*/
|
||
|
if (of_machine_is_compatible("RackMac1,1")
|
||
|
|| of_machine_is_compatible("RackMac1,2")
|
||
|
|| of_machine_is_compatible("MacRISC4"))
|
||
|
baud = 57600;
|
||
|
|
||
|
/*
|
||
|
* Check whether an invalid uart number has been specified, and
|
||
|
* if so, search for the first available port that does have
|
||
|
* console support.
|
||
|
*/
|
||
|
if (co->index >= pmz_ports_count)
|
||
|
co->index = 0;
|
||
|
uap = &pmz_ports[co->index];
|
||
|
if (uap->node == NULL)
|
||
|
return -ENODEV;
|
||
|
port = &uap->port;
|
||
|
|
||
|
/*
|
||
|
* Mark port as beeing a console
|
||
|
*/
|
||
|
uap->flags |= PMACZILOG_FLAG_IS_CONS;
|
||
|
|
||
|
/*
|
||
|
* Temporary fix for uart layer who didn't setup the spinlock yet
|
||
|
*/
|
||
|
spin_lock_init(&port->lock);
|
||
|
|
||
|
/*
|
||
|
* Enable the hardware
|
||
|
*/
|
||
|
pwr_delay = __pmz_startup(uap);
|
||
|
if (pwr_delay)
|
||
|
mdelay(pwr_delay);
|
||
|
|
||
|
if (options)
|
||
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
||
|
|
||
|
return uart_set_options(port, co, baud, parity, bits, flow);
|
||
|
}
|
||
|
|
||
|
static int __init pmz_console_init(void)
|
||
|
{
|
||
|
/* Probe ports */
|
||
|
pmz_probe();
|
||
|
|
||
|
/* TODO: Autoprobe console based on OF */
|
||
|
/* pmz_console.index = i; */
|
||
|
register_console(&pmz_console);
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
}
|
||
|
console_initcall(pmz_console_init);
|
||
|
#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
|
||
|
|
||
|
module_init(init_pmz);
|
||
|
module_exit(exit_pmz);
|