linux/drivers/platform/x86/fujitsu-laptop.c

1251 lines
32 KiB
C
Raw Normal View History

/*-*-linux-c-*-*/
/*
Copyright (C) 2007,2008 Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Copyright (C) 2008 Peter Gruber <nokos@gmx.net>
Copyright (C) 2008 Tony Vroon <tony@linx.net>
Based on earlier work:
Copyright (C) 2003 Shane Spencer <shane@bogomip.com>
Adrian Yee <brewt-fujitsu@brewt.org>
Templated from msi-laptop.c and thinkpad_acpi.c which is copyright
by its respective authors.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA.
*/
/*
* fujitsu-laptop.c - Fujitsu laptop support, providing access to additional
* features made available on a range of Fujitsu laptops including the
* P2xxx/P5xxx/S6xxx/S7xxx series.
*
* This driver exports a few files in /sys/devices/platform/fujitsu-laptop/;
* others may be added at a later date.
*
* lcd_level - Screen brightness: contains a single integer in the
* range 0..7. (rw)
*
* In addition to these platform device attributes the driver
* registers itself in the Linux backlight control subsystem and is
* available to userspace under /sys/class/backlight/fujitsu-laptop/.
*
* Hotkeys present on certain Fujitsu laptops (eg: the S6xxx series) are
* also supported by this driver.
*
* This driver has been tested on a Fujitsu Lifebook S6410, S7020 and
* P8010. It should work on most P-series and S-series Lifebooks, but
* YMMV.
*
* The module parameter use_alt_lcd_levels switches between different ACPI
* brightness controls which are used by different Fujitsu laptops. In most
* cases the correct method is automatically detected. "use_alt_lcd_levels=1"
* is applicable for a Fujitsu Lifebook S6410 if autodetection fails.
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/dmi.h>
#include <linux/backlight.h>
#include <linux/input.h>
#include <linux/kfifo.h>
#include <linux/video_output.h>
#include <linux/platform_device.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
#include <linux/leds.h>
#endif
#define FUJITSU_DRIVER_VERSION "0.6.0"
#define FUJITSU_LCD_N_LEVELS 8
#define ACPI_FUJITSU_CLASS "fujitsu"
#define ACPI_FUJITSU_HID "FUJ02B1"
#define ACPI_FUJITSU_DRIVER_NAME "Fujitsu laptop FUJ02B1 ACPI brightness driver"
#define ACPI_FUJITSU_DEVICE_NAME "Fujitsu FUJ02B1"
#define ACPI_FUJITSU_HOTKEY_HID "FUJ02E3"
#define ACPI_FUJITSU_HOTKEY_DRIVER_NAME "Fujitsu laptop FUJ02E3 ACPI hotkeys driver"
#define ACPI_FUJITSU_HOTKEY_DEVICE_NAME "Fujitsu FUJ02E3"
#define ACPI_FUJITSU_NOTIFY_CODE1 0x80
#define ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS 0x86
#define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS 0x87
/* FUNC interface - command values */
#define FUNC_RFKILL 0x1000
#define FUNC_LEDS 0x1001
#define FUNC_BUTTONS 0x1002
#define FUNC_BACKLIGHT 0x1004
/* FUNC interface - responses */
#define UNSUPPORTED_CMD 0x80000000
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
/* FUNC interface - LED control */
#define FUNC_LED_OFF 0x1
#define FUNC_LED_ON 0x30001
#define KEYBOARD_LAMPS 0x100
#define LOGOLAMP_POWERON 0x2000
#define LOGOLAMP_ALWAYS 0x4000
#endif
/* Hotkey details */
#define KEY1_CODE 0x410 /* codes for the keys in the GIRB register */
#define KEY2_CODE 0x411
#define KEY3_CODE 0x412
#define KEY4_CODE 0x413
#define MAX_HOTKEY_RINGBUFFER_SIZE 100
#define RINGBUFFERSIZE 40
/* Debugging */
#define FUJLAPTOP_LOG ACPI_FUJITSU_HID ": "
#define FUJLAPTOP_ERR KERN_ERR FUJLAPTOP_LOG
#define FUJLAPTOP_NOTICE KERN_NOTICE FUJLAPTOP_LOG
#define FUJLAPTOP_INFO KERN_INFO FUJLAPTOP_LOG
#define FUJLAPTOP_DEBUG KERN_DEBUG FUJLAPTOP_LOG
#define FUJLAPTOP_DBG_ALL 0xffff
#define FUJLAPTOP_DBG_ERROR 0x0001
#define FUJLAPTOP_DBG_WARN 0x0002
#define FUJLAPTOP_DBG_INFO 0x0004
#define FUJLAPTOP_DBG_TRACE 0x0008
#define dbg_printk(a_dbg_level, format, arg...) \
do { if (dbg_level & a_dbg_level) \
printk(FUJLAPTOP_DEBUG "%s: " format, __func__ , ## arg); \
} while (0)
#ifdef CONFIG_FUJITSU_LAPTOP_DEBUG
#define vdbg_printk(a_dbg_level, format, arg...) \
dbg_printk(a_dbg_level, format, ## arg)
#else
#define vdbg_printk(a_dbg_level, format, arg...)
#endif
/* Device controlling the backlight and associated keys */
struct fujitsu_t {
acpi_handle acpi_handle;
struct acpi_device *dev;
struct input_dev *input;
char phys[32];
struct backlight_device *bl_device;
struct platform_device *pf_device;
int keycode1, keycode2, keycode3, keycode4;
unsigned int max_brightness;
unsigned int brightness_changed;
unsigned int brightness_level;
};
static struct fujitsu_t *fujitsu;
static int use_alt_lcd_levels = -1;
static int disable_brightness_adjust = -1;
/* Device used to access other hotkeys on the laptop */
struct fujitsu_hotkey_t {
acpi_handle acpi_handle;
struct acpi_device *dev;
struct input_dev *input;
char phys[32];
struct platform_device *pf_device;
kfifo: move struct kfifo in place This is a new generic kernel FIFO implementation. The current kernel fifo API is not very widely used, because it has to many constrains. Only 17 files in the current 2.6.31-rc5 used it. FIFO's are like list's a very basic thing and a kfifo API which handles the most use case would save a lot of development time and memory resources. I think this are the reasons why kfifo is not in use: - The API is to simple, important functions are missing - A fifo can be only allocated dynamically - There is a requirement of a spinlock whether you need it or not - There is no support for data records inside a fifo So I decided to extend the kfifo in a more generic way without blowing up the API to much. The new API has the following benefits: - Generic usage: For kernel internal use and/or device driver. - Provide an API for the most use case. - Slim API: The whole API provides 25 functions. - Linux style habit. - DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros - Direct copy_to_user from the fifo and copy_from_user into the fifo. - The kfifo itself is an in place member of the using data structure, this save an indirection access and does not waste the kernel allocator. - Lockless access: if only one reader and one writer is active on the fifo, which is the common use case, no additional locking is necessary. - Remove spinlock - give the user the freedom of choice what kind of locking to use if one is required. - Ability to handle records. Three type of records are supported: - Variable length records between 0-255 bytes, with a record size field of 1 bytes. - Variable length records between 0-65535 bytes, with a record size field of 2 bytes. - Fixed size records, which no record size field. - Preserve memory resource. - Performance! - Easy to use! This patch: Since most users want to have the kfifo as part of another object, reorganize the code to allow including struct kfifo in another data structure. This requires changing the kfifo_alloc and kfifo_init prototypes so that we pass an existing kfifo pointer into them. This patch changes the implementation and all existing users. [akpm@linux-foundation.org: fix warning] Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22 06:37:26 +08:00
struct kfifo fifo;
spinlock_t fifo_lock;
int rfkill_supported;
int rfkill_state;
int logolamp_registered;
int kblamps_registered;
};
static struct fujitsu_hotkey_t *fujitsu_hotkey;
static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event);
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
static enum led_brightness logolamp_get(struct led_classdev *cdev);
static void logolamp_set(struct led_classdev *cdev,
enum led_brightness brightness);
static struct led_classdev logolamp_led = {
.name = "fujitsu::logolamp",
.brightness_get = logolamp_get,
.brightness_set = logolamp_set
};
static enum led_brightness kblamps_get(struct led_classdev *cdev);
static void kblamps_set(struct led_classdev *cdev,
enum led_brightness brightness);
static struct led_classdev kblamps_led = {
.name = "fujitsu::kblamps",
.brightness_get = kblamps_get,
.brightness_set = kblamps_set
};
#endif
#ifdef CONFIG_FUJITSU_LAPTOP_DEBUG
static u32 dbg_level = 0x03;
#endif
static void acpi_fujitsu_notify(struct acpi_device *device, u32 event);
/* Fujitsu ACPI interface function */
static int call_fext_func(int cmd, int arg0, int arg1, int arg2)
{
acpi_status status = AE_OK;
union acpi_object params[4] = {
{ .type = ACPI_TYPE_INTEGER },
{ .type = ACPI_TYPE_INTEGER },
{ .type = ACPI_TYPE_INTEGER },
{ .type = ACPI_TYPE_INTEGER }
};
struct acpi_object_list arg_list = { 4, &params[0] };
struct acpi_buffer output;
union acpi_object out_obj;
acpi_handle handle = NULL;
status = acpi_get_handle(fujitsu_hotkey->acpi_handle, "FUNC", &handle);
if (ACPI_FAILURE(status)) {
vdbg_printk(FUJLAPTOP_DBG_ERROR,
"FUNC interface is not present\n");
return -ENODEV;
}
params[0].integer.value = cmd;
params[1].integer.value = arg0;
params[2].integer.value = arg1;
params[3].integer.value = arg2;
output.length = sizeof(out_obj);
output.pointer = &out_obj;
status = acpi_evaluate_object(handle, NULL, &arg_list, &output);
if (ACPI_FAILURE(status)) {
vdbg_printk(FUJLAPTOP_DBG_WARN,
"FUNC 0x%x (args 0x%x, 0x%x, 0x%x) call failed\n",
cmd, arg0, arg1, arg2);
return -ENODEV;
}
if (out_obj.type != ACPI_TYPE_INTEGER) {
vdbg_printk(FUJLAPTOP_DBG_WARN,
"FUNC 0x%x (args 0x%x, 0x%x, 0x%x) did not "
"return an integer\n",
cmd, arg0, arg1, arg2);
return -ENODEV;
}
vdbg_printk(FUJLAPTOP_DBG_TRACE,
"FUNC 0x%x (args 0x%x, 0x%x, 0x%x) returned 0x%x\n",
cmd, arg0, arg1, arg2, (int)out_obj.integer.value);
return out_obj.integer.value;
}
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
/* LED class callbacks */
static void logolamp_set(struct led_classdev *cdev,
enum led_brightness brightness)
{
if (brightness >= LED_FULL) {
call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_POWERON, FUNC_LED_ON);
call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_ALWAYS, FUNC_LED_ON);
} else if (brightness >= LED_HALF) {
call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_POWERON, FUNC_LED_ON);
call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_ALWAYS, FUNC_LED_OFF);
} else {
call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_POWERON, FUNC_LED_OFF);
}
}
static void kblamps_set(struct led_classdev *cdev,
enum led_brightness brightness)
{
if (brightness >= LED_FULL)
call_fext_func(FUNC_LEDS, 0x1, KEYBOARD_LAMPS, FUNC_LED_ON);
else
call_fext_func(FUNC_LEDS, 0x1, KEYBOARD_LAMPS, FUNC_LED_OFF);
}
static enum led_brightness logolamp_get(struct led_classdev *cdev)
{
enum led_brightness brightness = LED_OFF;
int poweron, always;
poweron = call_fext_func(FUNC_LEDS, 0x2, LOGOLAMP_POWERON, 0x0);
if (poweron == FUNC_LED_ON) {
brightness = LED_HALF;
always = call_fext_func(FUNC_LEDS, 0x2, LOGOLAMP_ALWAYS, 0x0);
if (always == FUNC_LED_ON)
brightness = LED_FULL;
}
return brightness;
}
static enum led_brightness kblamps_get(struct led_classdev *cdev)
{
enum led_brightness brightness = LED_OFF;
if (call_fext_func(FUNC_LEDS, 0x2, KEYBOARD_LAMPS, 0x0) == FUNC_LED_ON)
brightness = LED_FULL;
return brightness;
}
#endif
/* Hardware access for LCD brightness control */
static int set_lcd_level(int level)
{
acpi_status status = AE_OK;
union acpi_object arg0 = { ACPI_TYPE_INTEGER };
struct acpi_object_list arg_list = { 1, &arg0 };
acpi_handle handle = NULL;
vdbg_printk(FUJLAPTOP_DBG_TRACE, "set lcd level via SBLL [%d]\n",
level);
if (level < 0 || level >= fujitsu->max_brightness)
return -EINVAL;
status = acpi_get_handle(fujitsu->acpi_handle, "SBLL", &handle);
if (ACPI_FAILURE(status)) {
vdbg_printk(FUJLAPTOP_DBG_ERROR, "SBLL not present\n");
return -ENODEV;
}
arg0.integer.value = level;
status = acpi_evaluate_object(handle, NULL, &arg_list, NULL);
if (ACPI_FAILURE(status))
return -ENODEV;
return 0;
}
static int set_lcd_level_alt(int level)
{
acpi_status status = AE_OK;
union acpi_object arg0 = { ACPI_TYPE_INTEGER };
struct acpi_object_list arg_list = { 1, &arg0 };
acpi_handle handle = NULL;
vdbg_printk(FUJLAPTOP_DBG_TRACE, "set lcd level via SBL2 [%d]\n",
level);
if (level < 0 || level >= fujitsu->max_brightness)
return -EINVAL;
status = acpi_get_handle(fujitsu->acpi_handle, "SBL2", &handle);
if (ACPI_FAILURE(status)) {
vdbg_printk(FUJLAPTOP_DBG_ERROR, "SBL2 not present\n");
return -ENODEV;
}
arg0.integer.value = level;
status = acpi_evaluate_object(handle, NULL, &arg_list, NULL);
if (ACPI_FAILURE(status))
return -ENODEV;
return 0;
}
static int get_lcd_level(void)
{
unsigned long long state = 0;
acpi_status status = AE_OK;
vdbg_printk(FUJLAPTOP_DBG_TRACE, "get lcd level via GBLL\n");
status =
acpi_evaluate_integer(fujitsu->acpi_handle, "GBLL", NULL, &state);
if (ACPI_FAILURE(status))
return 0;
fujitsu->brightness_level = state & 0x0fffffff;
if (state & 0x80000000)
fujitsu->brightness_changed = 1;
else
fujitsu->brightness_changed = 0;
return fujitsu->brightness_level;
}
static int get_max_brightness(void)
{
unsigned long long state = 0;
acpi_status status = AE_OK;
vdbg_printk(FUJLAPTOP_DBG_TRACE, "get max lcd level via RBLL\n");
status =
acpi_evaluate_integer(fujitsu->acpi_handle, "RBLL", NULL, &state);
if (ACPI_FAILURE(status))
return -1;
fujitsu->max_brightness = state;
return fujitsu->max_brightness;
}
/* Backlight device stuff */
static int bl_get_brightness(struct backlight_device *b)
{
return get_lcd_level();
}
static int bl_update_status(struct backlight_device *b)
{
int ret;
if (b->props.power == 4)
ret = call_fext_func(FUNC_BACKLIGHT, 0x1, 0x4, 0x3);
else
ret = call_fext_func(FUNC_BACKLIGHT, 0x1, 0x4, 0x0);
if (ret != 0)
vdbg_printk(FUJLAPTOP_DBG_ERROR,
"Unable to adjust backlight power, error code %i\n",
ret);
if (use_alt_lcd_levels)
ret = set_lcd_level_alt(b->props.brightness);
else
ret = set_lcd_level(b->props.brightness);
if (ret != 0)
vdbg_printk(FUJLAPTOP_DBG_ERROR,
"Unable to adjust LCD brightness, error code %i\n",
ret);
return ret;
}
static const struct backlight_ops fujitsubl_ops = {
.get_brightness = bl_get_brightness,
.update_status = bl_update_status,
};
/* Platform LCD brightness device */
static ssize_t
show_max_brightness(struct device *dev,
struct device_attribute *attr, char *buf)
{
int ret;
ret = get_max_brightness();
if (ret < 0)
return ret;
return sprintf(buf, "%i\n", ret);
}
static ssize_t
show_brightness_changed(struct device *dev,
struct device_attribute *attr, char *buf)
{
int ret;
ret = fujitsu->brightness_changed;
if (ret < 0)
return ret;
return sprintf(buf, "%i\n", ret);
}
static ssize_t show_lcd_level(struct device *dev,
struct device_attribute *attr, char *buf)
{
int ret;
ret = get_lcd_level();
if (ret < 0)
return ret;
return sprintf(buf, "%i\n", ret);
}
static ssize_t store_lcd_level(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
{
int level, ret;
if (sscanf(buf, "%i", &level) != 1
|| (level < 0 || level >= fujitsu->max_brightness))
return -EINVAL;
if (use_alt_lcd_levels)
ret = set_lcd_level_alt(level);
else
ret = set_lcd_level(level);
if (ret < 0)
return ret;
ret = get_lcd_level();
if (ret < 0)
return ret;
return count;
}
static ssize_t
ignore_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
return count;
}
static ssize_t
show_lid_state(struct device *dev,
struct device_attribute *attr, char *buf)
{
if (!(fujitsu_hotkey->rfkill_supported & 0x100))
return sprintf(buf, "unknown\n");
if (fujitsu_hotkey->rfkill_state & 0x100)
return sprintf(buf, "open\n");
else
return sprintf(buf, "closed\n");
}
static ssize_t
show_dock_state(struct device *dev,
struct device_attribute *attr, char *buf)
{
if (!(fujitsu_hotkey->rfkill_supported & 0x200))
return sprintf(buf, "unknown\n");
if (fujitsu_hotkey->rfkill_state & 0x200)
return sprintf(buf, "docked\n");
else
return sprintf(buf, "undocked\n");
}
static ssize_t
show_radios_state(struct device *dev,
struct device_attribute *attr, char *buf)
{
if (!(fujitsu_hotkey->rfkill_supported & 0x20))
return sprintf(buf, "unknown\n");
if (fujitsu_hotkey->rfkill_state & 0x20)
return sprintf(buf, "on\n");
else
return sprintf(buf, "killed\n");
}
static DEVICE_ATTR(max_brightness, 0444, show_max_brightness, ignore_store);
static DEVICE_ATTR(brightness_changed, 0444, show_brightness_changed,
ignore_store);
static DEVICE_ATTR(lcd_level, 0644, show_lcd_level, store_lcd_level);
static DEVICE_ATTR(lid, 0444, show_lid_state, ignore_store);
static DEVICE_ATTR(dock, 0444, show_dock_state, ignore_store);
static DEVICE_ATTR(radios, 0444, show_radios_state, ignore_store);
static struct attribute *fujitsupf_attributes[] = {
&dev_attr_brightness_changed.attr,
&dev_attr_max_brightness.attr,
&dev_attr_lcd_level.attr,
&dev_attr_lid.attr,
&dev_attr_dock.attr,
&dev_attr_radios.attr,
NULL
};
static struct attribute_group fujitsupf_attribute_group = {
.attrs = fujitsupf_attributes
};
static struct platform_driver fujitsupf_driver = {
.driver = {
.name = "fujitsu-laptop",
.owner = THIS_MODULE,
}
};
static void dmi_check_cb_common(const struct dmi_system_id *id)
{
acpi_handle handle;
pr_info("Identified laptop model '%s'\n", id->ident);
if (use_alt_lcd_levels == -1) {
if (ACPI_SUCCESS(acpi_get_handle(NULL,
"\\_SB.PCI0.LPCB.FJEX.SBL2", &handle)))
use_alt_lcd_levels = 1;
else
use_alt_lcd_levels = 0;
vdbg_printk(FUJLAPTOP_DBG_TRACE, "auto-detected usealt as "
"%i\n", use_alt_lcd_levels);
}
}
static int dmi_check_cb_s6410(const struct dmi_system_id *id)
{
dmi_check_cb_common(id);
fujitsu->keycode1 = KEY_SCREENLOCK; /* "Lock" */
fujitsu->keycode2 = KEY_HELP; /* "Mobility Center" */
return 1;
}
static int dmi_check_cb_s6420(const struct dmi_system_id *id)
{
dmi_check_cb_common(id);
fujitsu->keycode1 = KEY_SCREENLOCK; /* "Lock" */
fujitsu->keycode2 = KEY_HELP; /* "Mobility Center" */
return 1;
}
static int dmi_check_cb_p8010(const struct dmi_system_id *id)
{
dmi_check_cb_common(id);
fujitsu->keycode1 = KEY_HELP; /* "Support" */
fujitsu->keycode3 = KEY_SWITCHVIDEOMODE; /* "Presentation" */
fujitsu->keycode4 = KEY_WWW; /* "Internet" */
return 1;
}
static struct dmi_system_id fujitsu_dmi_table[] = {
{
.ident = "Fujitsu Siemens S6410",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6410"),
},
.callback = dmi_check_cb_s6410},
{
.ident = "Fujitsu Siemens S6420",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6420"),
},
.callback = dmi_check_cb_s6420},
{
.ident = "Fujitsu LifeBook P8010",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P8010"),
},
.callback = dmi_check_cb_p8010},
{}
};
/* ACPI device for LCD brightness control */
static int acpi_fujitsu_add(struct acpi_device *device)
{
acpi_handle handle;
int result = 0;
int state = 0;
struct input_dev *input;
int error;
if (!device)
return -EINVAL;
fujitsu->acpi_handle = device->handle;
sprintf(acpi_device_name(device), "%s", ACPI_FUJITSU_DEVICE_NAME);
sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS);
device->driver_data = fujitsu;
fujitsu->input = input = input_allocate_device();
if (!input) {
error = -ENOMEM;
goto err_stop;
}
snprintf(fujitsu->phys, sizeof(fujitsu->phys),
"%s/video/input0", acpi_device_hid(device));
input->name = acpi_device_name(device);
input->phys = fujitsu->phys;
input->id.bustype = BUS_HOST;
input->id.product = 0x06;
input->dev.parent = &device->dev;
input->evbit[0] = BIT(EV_KEY);
set_bit(KEY_BRIGHTNESSUP, input->keybit);
set_bit(KEY_BRIGHTNESSDOWN, input->keybit);
set_bit(KEY_UNKNOWN, input->keybit);
error = input_register_device(input);
if (error)
goto err_free_input_dev;
result = acpi_bus_update_power(fujitsu->acpi_handle, &state);
if (result) {
pr_err("Error reading power state\n");
goto err_unregister_input_dev;
}
pr_info("ACPI: %s [%s] (%s)\n",
acpi_device_name(device), acpi_device_bid(device),
!device->power.state ? "on" : "off");
fujitsu->dev = device;
if (ACPI_SUCCESS
(acpi_get_handle(device->handle, METHOD_NAME__INI, &handle))) {
vdbg_printk(FUJLAPTOP_DBG_INFO, "Invoking _INI\n");
if (ACPI_FAILURE
(acpi_evaluate_object
(device->handle, METHOD_NAME__INI, NULL, NULL)))
pr_err("_INI Method failed\n");
}
/* do config (detect defaults) */
use_alt_lcd_levels = use_alt_lcd_levels == 1 ? 1 : 0;
disable_brightness_adjust = disable_brightness_adjust == 1 ? 1 : 0;
vdbg_printk(FUJLAPTOP_DBG_INFO,
"config: [alt interface: %d], [adjust disable: %d]\n",
use_alt_lcd_levels, disable_brightness_adjust);
if (get_max_brightness() <= 0)
fujitsu->max_brightness = FUJITSU_LCD_N_LEVELS;
get_lcd_level();
return result;
err_unregister_input_dev:
input_unregister_device(input);
input = NULL;
err_free_input_dev:
input_free_device(input);
err_stop:
return result;
}
static int acpi_fujitsu_remove(struct acpi_device *device, int type)
{
struct fujitsu_t *fujitsu = acpi_driver_data(device);
struct input_dev *input = fujitsu->input;
input_unregister_device(input);
fujitsu->acpi_handle = NULL;
return 0;
}
/* Brightness notify */
static void acpi_fujitsu_notify(struct acpi_device *device, u32 event)
{
struct input_dev *input;
int keycode;
int oldb, newb;
input = fujitsu->input;
switch (event) {
case ACPI_FUJITSU_NOTIFY_CODE1:
keycode = 0;
oldb = fujitsu->brightness_level;
get_lcd_level();
newb = fujitsu->brightness_level;
vdbg_printk(FUJLAPTOP_DBG_TRACE,
"brightness button event [%i -> %i (%i)]\n",
oldb, newb, fujitsu->brightness_changed);
if (oldb < newb) {
if (disable_brightness_adjust != 1) {
if (use_alt_lcd_levels)
set_lcd_level_alt(newb);
else
set_lcd_level(newb);
}
acpi_bus_generate_proc_event(fujitsu->dev,
ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS, 0);
keycode = KEY_BRIGHTNESSUP;
} else if (oldb > newb) {
if (disable_brightness_adjust != 1) {
if (use_alt_lcd_levels)
set_lcd_level_alt(newb);
else
set_lcd_level(newb);
}
acpi_bus_generate_proc_event(fujitsu->dev,
ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS, 0);
keycode = KEY_BRIGHTNESSDOWN;
}
break;
default:
keycode = KEY_UNKNOWN;
vdbg_printk(FUJLAPTOP_DBG_WARN,
"unsupported event [0x%x]\n", event);
break;
}
if (keycode != 0) {
input_report_key(input, keycode, 1);
input_sync(input);
input_report_key(input, keycode, 0);
input_sync(input);
}
}
/* ACPI device for hotkey handling */
static int acpi_fujitsu_hotkey_add(struct acpi_device *device)
{
acpi_handle handle;
int result = 0;
int state = 0;
struct input_dev *input;
int error;
int i;
if (!device)
return -EINVAL;
fujitsu_hotkey->acpi_handle = device->handle;
sprintf(acpi_device_name(device), "%s",
ACPI_FUJITSU_HOTKEY_DEVICE_NAME);
sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS);
device->driver_data = fujitsu_hotkey;
/* kfifo */
spin_lock_init(&fujitsu_hotkey->fifo_lock);
kfifo: move struct kfifo in place This is a new generic kernel FIFO implementation. The current kernel fifo API is not very widely used, because it has to many constrains. Only 17 files in the current 2.6.31-rc5 used it. FIFO's are like list's a very basic thing and a kfifo API which handles the most use case would save a lot of development time and memory resources. I think this are the reasons why kfifo is not in use: - The API is to simple, important functions are missing - A fifo can be only allocated dynamically - There is a requirement of a spinlock whether you need it or not - There is no support for data records inside a fifo So I decided to extend the kfifo in a more generic way without blowing up the API to much. The new API has the following benefits: - Generic usage: For kernel internal use and/or device driver. - Provide an API for the most use case. - Slim API: The whole API provides 25 functions. - Linux style habit. - DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros - Direct copy_to_user from the fifo and copy_from_user into the fifo. - The kfifo itself is an in place member of the using data structure, this save an indirection access and does not waste the kernel allocator. - Lockless access: if only one reader and one writer is active on the fifo, which is the common use case, no additional locking is necessary. - Remove spinlock - give the user the freedom of choice what kind of locking to use if one is required. - Ability to handle records. Three type of records are supported: - Variable length records between 0-255 bytes, with a record size field of 1 bytes. - Variable length records between 0-65535 bytes, with a record size field of 2 bytes. - Fixed size records, which no record size field. - Preserve memory resource. - Performance! - Easy to use! This patch: Since most users want to have the kfifo as part of another object, reorganize the code to allow including struct kfifo in another data structure. This requires changing the kfifo_alloc and kfifo_init prototypes so that we pass an existing kfifo pointer into them. This patch changes the implementation and all existing users. [akpm@linux-foundation.org: fix warning] Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22 06:37:26 +08:00
error = kfifo_alloc(&fujitsu_hotkey->fifo, RINGBUFFERSIZE * sizeof(int),
GFP_KERNEL);
kfifo: move struct kfifo in place This is a new generic kernel FIFO implementation. The current kernel fifo API is not very widely used, because it has to many constrains. Only 17 files in the current 2.6.31-rc5 used it. FIFO's are like list's a very basic thing and a kfifo API which handles the most use case would save a lot of development time and memory resources. I think this are the reasons why kfifo is not in use: - The API is to simple, important functions are missing - A fifo can be only allocated dynamically - There is a requirement of a spinlock whether you need it or not - There is no support for data records inside a fifo So I decided to extend the kfifo in a more generic way without blowing up the API to much. The new API has the following benefits: - Generic usage: For kernel internal use and/or device driver. - Provide an API for the most use case. - Slim API: The whole API provides 25 functions. - Linux style habit. - DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros - Direct copy_to_user from the fifo and copy_from_user into the fifo. - The kfifo itself is an in place member of the using data structure, this save an indirection access and does not waste the kernel allocator. - Lockless access: if only one reader and one writer is active on the fifo, which is the common use case, no additional locking is necessary. - Remove spinlock - give the user the freedom of choice what kind of locking to use if one is required. - Ability to handle records. Three type of records are supported: - Variable length records between 0-255 bytes, with a record size field of 1 bytes. - Variable length records between 0-65535 bytes, with a record size field of 2 bytes. - Fixed size records, which no record size field. - Preserve memory resource. - Performance! - Easy to use! This patch: Since most users want to have the kfifo as part of another object, reorganize the code to allow including struct kfifo in another data structure. This requires changing the kfifo_alloc and kfifo_init prototypes so that we pass an existing kfifo pointer into them. This patch changes the implementation and all existing users. [akpm@linux-foundation.org: fix warning] Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22 06:37:26 +08:00
if (error) {
pr_err("kfifo_alloc failed\n");
goto err_stop;
}
fujitsu_hotkey->input = input = input_allocate_device();
if (!input) {
error = -ENOMEM;
goto err_free_fifo;
}
snprintf(fujitsu_hotkey->phys, sizeof(fujitsu_hotkey->phys),
"%s/video/input0", acpi_device_hid(device));
input->name = acpi_device_name(device);
input->phys = fujitsu_hotkey->phys;
input->id.bustype = BUS_HOST;
input->id.product = 0x06;
input->dev.parent = &device->dev;
set_bit(EV_KEY, input->evbit);
set_bit(fujitsu->keycode1, input->keybit);
set_bit(fujitsu->keycode2, input->keybit);
set_bit(fujitsu->keycode3, input->keybit);
set_bit(fujitsu->keycode4, input->keybit);
set_bit(KEY_UNKNOWN, input->keybit);
error = input_register_device(input);
if (error)
goto err_free_input_dev;
result = acpi_bus_update_power(fujitsu_hotkey->acpi_handle, &state);
if (result) {
pr_err("Error reading power state\n");
goto err_unregister_input_dev;
}
pr_info("ACPI: %s [%s] (%s)\n",
acpi_device_name(device), acpi_device_bid(device),
!device->power.state ? "on" : "off");
fujitsu_hotkey->dev = device;
if (ACPI_SUCCESS
(acpi_get_handle(device->handle, METHOD_NAME__INI, &handle))) {
vdbg_printk(FUJLAPTOP_DBG_INFO, "Invoking _INI\n");
if (ACPI_FAILURE
(acpi_evaluate_object
(device->handle, METHOD_NAME__INI, NULL, NULL)))
pr_err("_INI Method failed\n");
}
i = 0;
while (call_fext_func(FUNC_BUTTONS, 0x1, 0x0, 0x0) != 0
&& (i++) < MAX_HOTKEY_RINGBUFFER_SIZE)
; /* No action, result is discarded */
vdbg_printk(FUJLAPTOP_DBG_INFO, "Discarded %i ringbuffer entries\n", i);
fujitsu_hotkey->rfkill_supported =
call_fext_func(FUNC_RFKILL, 0x0, 0x0, 0x0);
/* Make sure our bitmask of supported functions is cleared if the
RFKILL function block is not implemented, like on the S7020. */
if (fujitsu_hotkey->rfkill_supported == UNSUPPORTED_CMD)
fujitsu_hotkey->rfkill_supported = 0;
if (fujitsu_hotkey->rfkill_supported)
fujitsu_hotkey->rfkill_state =
call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
/* Suspect this is a keymap of the application panel, print it */
pr_info("BTNI: [0x%x]\n", call_fext_func(FUNC_BUTTONS, 0x0, 0x0, 0x0));
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
if (call_fext_func(FUNC_LEDS, 0x0, 0x0, 0x0) & LOGOLAMP_POWERON) {
result = led_classdev_register(&fujitsu->pf_device->dev,
&logolamp_led);
if (result == 0) {
fujitsu_hotkey->logolamp_registered = 1;
} else {
pr_err("Could not register LED handler for logo lamp, error %i\n",
result);
}
}
if ((call_fext_func(FUNC_LEDS, 0x0, 0x0, 0x0) & KEYBOARD_LAMPS) &&
(call_fext_func(FUNC_BUTTONS, 0x0, 0x0, 0x0) == 0x0)) {
result = led_classdev_register(&fujitsu->pf_device->dev,
&kblamps_led);
if (result == 0) {
fujitsu_hotkey->kblamps_registered = 1;
} else {
pr_err("Could not register LED handler for keyboard lamps, error %i\n",
result);
}
}
#endif
return result;
err_unregister_input_dev:
input_unregister_device(input);
input = NULL;
err_free_input_dev:
input_free_device(input);
err_free_fifo:
kfifo: move struct kfifo in place This is a new generic kernel FIFO implementation. The current kernel fifo API is not very widely used, because it has to many constrains. Only 17 files in the current 2.6.31-rc5 used it. FIFO's are like list's a very basic thing and a kfifo API which handles the most use case would save a lot of development time and memory resources. I think this are the reasons why kfifo is not in use: - The API is to simple, important functions are missing - A fifo can be only allocated dynamically - There is a requirement of a spinlock whether you need it or not - There is no support for data records inside a fifo So I decided to extend the kfifo in a more generic way without blowing up the API to much. The new API has the following benefits: - Generic usage: For kernel internal use and/or device driver. - Provide an API for the most use case. - Slim API: The whole API provides 25 functions. - Linux style habit. - DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros - Direct copy_to_user from the fifo and copy_from_user into the fifo. - The kfifo itself is an in place member of the using data structure, this save an indirection access and does not waste the kernel allocator. - Lockless access: if only one reader and one writer is active on the fifo, which is the common use case, no additional locking is necessary. - Remove spinlock - give the user the freedom of choice what kind of locking to use if one is required. - Ability to handle records. Three type of records are supported: - Variable length records between 0-255 bytes, with a record size field of 1 bytes. - Variable length records between 0-65535 bytes, with a record size field of 2 bytes. - Fixed size records, which no record size field. - Preserve memory resource. - Performance! - Easy to use! This patch: Since most users want to have the kfifo as part of another object, reorganize the code to allow including struct kfifo in another data structure. This requires changing the kfifo_alloc and kfifo_init prototypes so that we pass an existing kfifo pointer into them. This patch changes the implementation and all existing users. [akpm@linux-foundation.org: fix warning] Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22 06:37:26 +08:00
kfifo_free(&fujitsu_hotkey->fifo);
err_stop:
return result;
}
static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type)
{
struct fujitsu_hotkey_t *fujitsu_hotkey = acpi_driver_data(device);
struct input_dev *input = fujitsu_hotkey->input;
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
if (fujitsu_hotkey->logolamp_registered)
led_classdev_unregister(&logolamp_led);
if (fujitsu_hotkey->kblamps_registered)
led_classdev_unregister(&kblamps_led);
#endif
input_unregister_device(input);
kfifo: move struct kfifo in place This is a new generic kernel FIFO implementation. The current kernel fifo API is not very widely used, because it has to many constrains. Only 17 files in the current 2.6.31-rc5 used it. FIFO's are like list's a very basic thing and a kfifo API which handles the most use case would save a lot of development time and memory resources. I think this are the reasons why kfifo is not in use: - The API is to simple, important functions are missing - A fifo can be only allocated dynamically - There is a requirement of a spinlock whether you need it or not - There is no support for data records inside a fifo So I decided to extend the kfifo in a more generic way without blowing up the API to much. The new API has the following benefits: - Generic usage: For kernel internal use and/or device driver. - Provide an API for the most use case. - Slim API: The whole API provides 25 functions. - Linux style habit. - DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros - Direct copy_to_user from the fifo and copy_from_user into the fifo. - The kfifo itself is an in place member of the using data structure, this save an indirection access and does not waste the kernel allocator. - Lockless access: if only one reader and one writer is active on the fifo, which is the common use case, no additional locking is necessary. - Remove spinlock - give the user the freedom of choice what kind of locking to use if one is required. - Ability to handle records. Three type of records are supported: - Variable length records between 0-255 bytes, with a record size field of 1 bytes. - Variable length records between 0-65535 bytes, with a record size field of 2 bytes. - Fixed size records, which no record size field. - Preserve memory resource. - Performance! - Easy to use! This patch: Since most users want to have the kfifo as part of another object, reorganize the code to allow including struct kfifo in another data structure. This requires changing the kfifo_alloc and kfifo_init prototypes so that we pass an existing kfifo pointer into them. This patch changes the implementation and all existing users. [akpm@linux-foundation.org: fix warning] Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22 06:37:26 +08:00
kfifo_free(&fujitsu_hotkey->fifo);
fujitsu_hotkey->acpi_handle = NULL;
return 0;
}
static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event)
{
struct input_dev *input;
int keycode, keycode_r;
unsigned int irb = 1;
int i, status;
input = fujitsu_hotkey->input;
if (fujitsu_hotkey->rfkill_supported)
fujitsu_hotkey->rfkill_state =
call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
switch (event) {
case ACPI_FUJITSU_NOTIFY_CODE1:
i = 0;
while ((irb =
call_fext_func(FUNC_BUTTONS, 0x1, 0x0, 0x0)) != 0
&& (i++) < MAX_HOTKEY_RINGBUFFER_SIZE) {
switch (irb & 0x4ff) {
case KEY1_CODE:
keycode = fujitsu->keycode1;
break;
case KEY2_CODE:
keycode = fujitsu->keycode2;
break;
case KEY3_CODE:
keycode = fujitsu->keycode3;
break;
case KEY4_CODE:
keycode = fujitsu->keycode4;
break;
case 0:
keycode = 0;
break;
default:
vdbg_printk(FUJLAPTOP_DBG_WARN,
"Unknown GIRB result [%x]\n", irb);
keycode = -1;
break;
}
if (keycode > 0) {
vdbg_printk(FUJLAPTOP_DBG_TRACE,
"Push keycode into ringbuffer [%d]\n",
keycode);
status = kfifo_in_locked(&fujitsu_hotkey->fifo,
(unsigned char *)&keycode,
sizeof(keycode),
&fujitsu_hotkey->fifo_lock);
if (status != sizeof(keycode)) {
vdbg_printk(FUJLAPTOP_DBG_WARN,
"Could not push keycode [0x%x]\n",
keycode);
} else {
input_report_key(input, keycode, 1);
input_sync(input);
}
} else if (keycode == 0) {
while ((status =
kfifo_out_locked(
&fujitsu_hotkey->fifo,
(unsigned char *) &keycode_r,
sizeof(keycode_r),
&fujitsu_hotkey->fifo_lock))
== sizeof(keycode_r)) {
input_report_key(input, keycode_r, 0);
input_sync(input);
vdbg_printk(FUJLAPTOP_DBG_TRACE,
"Pop keycode from ringbuffer [%d]\n",
keycode_r);
}
}
}
break;
default:
keycode = KEY_UNKNOWN;
vdbg_printk(FUJLAPTOP_DBG_WARN,
"Unsupported event [0x%x]\n", event);
input_report_key(input, keycode, 1);
input_sync(input);
input_report_key(input, keycode, 0);
input_sync(input);
break;
}
}
/* Initialization */
static const struct acpi_device_id fujitsu_device_ids[] = {
{ACPI_FUJITSU_HID, 0},
{"", 0},
};
static struct acpi_driver acpi_fujitsu_driver = {
.name = ACPI_FUJITSU_DRIVER_NAME,
.class = ACPI_FUJITSU_CLASS,
.ids = fujitsu_device_ids,
.ops = {
.add = acpi_fujitsu_add,
.remove = acpi_fujitsu_remove,
.notify = acpi_fujitsu_notify,
},
};
static const struct acpi_device_id fujitsu_hotkey_device_ids[] = {
{ACPI_FUJITSU_HOTKEY_HID, 0},
{"", 0},
};
static struct acpi_driver acpi_fujitsu_hotkey_driver = {
.name = ACPI_FUJITSU_HOTKEY_DRIVER_NAME,
.class = ACPI_FUJITSU_CLASS,
.ids = fujitsu_hotkey_device_ids,
.ops = {
.add = acpi_fujitsu_hotkey_add,
.remove = acpi_fujitsu_hotkey_remove,
.notify = acpi_fujitsu_hotkey_notify,
},
};
static int __init fujitsu_init(void)
{
int ret, result, max_brightness;
if (acpi_disabled)
return -ENODEV;
fujitsu = kzalloc(sizeof(struct fujitsu_t), GFP_KERNEL);
if (!fujitsu)
return -ENOMEM;
fujitsu->keycode1 = KEY_PROG1;
fujitsu->keycode2 = KEY_PROG2;
fujitsu->keycode3 = KEY_PROG3;
fujitsu->keycode4 = KEY_PROG4;
dmi_check_system(fujitsu_dmi_table);
result = acpi_bus_register_driver(&acpi_fujitsu_driver);
if (result < 0) {
ret = -ENODEV;
goto fail_acpi;
}
/* Register platform stuff */
fujitsu->pf_device = platform_device_alloc("fujitsu-laptop", -1);
if (!fujitsu->pf_device) {
ret = -ENOMEM;
goto fail_platform_driver;
}
ret = platform_device_add(fujitsu->pf_device);
if (ret)
goto fail_platform_device1;
ret =
sysfs_create_group(&fujitsu->pf_device->dev.kobj,
&fujitsupf_attribute_group);
if (ret)
goto fail_platform_device2;
/* Register backlight stuff */
if (!acpi_video_backlight_support()) {
struct backlight_properties props;
memset(&props, 0, sizeof(struct backlight_properties));
max_brightness = fujitsu->max_brightness;
props.type = BACKLIGHT_PLATFORM;
props.max_brightness = max_brightness - 1;
fujitsu->bl_device = backlight_device_register("fujitsu-laptop",
NULL, NULL,
&fujitsubl_ops,
&props);
if (IS_ERR(fujitsu->bl_device)) {
ret = PTR_ERR(fujitsu->bl_device);
fujitsu->bl_device = NULL;
goto fail_sysfs_group;
}
fujitsu->bl_device->props.brightness = fujitsu->brightness_level;
}
ret = platform_driver_register(&fujitsupf_driver);
if (ret)
goto fail_backlight;
/* Register hotkey driver */
fujitsu_hotkey = kzalloc(sizeof(struct fujitsu_hotkey_t), GFP_KERNEL);
if (!fujitsu_hotkey) {
ret = -ENOMEM;
goto fail_hotkey;
}
result = acpi_bus_register_driver(&acpi_fujitsu_hotkey_driver);
if (result < 0) {
ret = -ENODEV;
goto fail_hotkey1;
}
/* Sync backlight power status (needs FUJ02E3 device, hence deferred) */
if (!acpi_video_backlight_support()) {
if (call_fext_func(FUNC_BACKLIGHT, 0x2, 0x4, 0x0) == 3)
fujitsu->bl_device->props.power = 4;
else
fujitsu->bl_device->props.power = 0;
}
pr_info("driver " FUJITSU_DRIVER_VERSION " successfully loaded\n");
return 0;
fail_hotkey1:
kfree(fujitsu_hotkey);
fail_hotkey:
platform_driver_unregister(&fujitsupf_driver);
fail_backlight:
if (fujitsu->bl_device)
backlight_device_unregister(fujitsu->bl_device);
fail_sysfs_group:
sysfs_remove_group(&fujitsu->pf_device->dev.kobj,
&fujitsupf_attribute_group);
fail_platform_device2:
platform_device_del(fujitsu->pf_device);
fail_platform_device1:
platform_device_put(fujitsu->pf_device);
fail_platform_driver:
acpi_bus_unregister_driver(&acpi_fujitsu_driver);
fail_acpi:
kfree(fujitsu);
return ret;
}
static void __exit fujitsu_cleanup(void)
{
acpi_bus_unregister_driver(&acpi_fujitsu_hotkey_driver);
kfree(fujitsu_hotkey);
platform_driver_unregister(&fujitsupf_driver);
if (fujitsu->bl_device)
backlight_device_unregister(fujitsu->bl_device);
sysfs_remove_group(&fujitsu->pf_device->dev.kobj,
&fujitsupf_attribute_group);
platform_device_unregister(fujitsu->pf_device);
acpi_bus_unregister_driver(&acpi_fujitsu_driver);
kfree(fujitsu);
pr_info("driver unloaded\n");
}
module_init(fujitsu_init);
module_exit(fujitsu_cleanup);
module_param(use_alt_lcd_levels, uint, 0644);
MODULE_PARM_DESC(use_alt_lcd_levels,
"Use alternative interface for lcd_levels (needed for Lifebook s6410).");
module_param(disable_brightness_adjust, uint, 0644);
MODULE_PARM_DESC(disable_brightness_adjust, "Disable brightness adjustment .");
#ifdef CONFIG_FUJITSU_LAPTOP_DEBUG
module_param_named(debug, dbg_level, uint, 0644);
MODULE_PARM_DESC(debug, "Sets debug level bit-mask");
#endif
MODULE_AUTHOR("Jonathan Woithe, Peter Gruber, Tony Vroon");
MODULE_DESCRIPTION("Fujitsu laptop extras support");
MODULE_VERSION(FUJITSU_DRIVER_VERSION);
MODULE_LICENSE("GPL");
MODULE_ALIAS("dmi:*:svnFUJITSUSIEMENS:*:pvr:rvnFUJITSU:rnFJNB1D3:*:cvrS6410:*");
MODULE_ALIAS("dmi:*:svnFUJITSUSIEMENS:*:pvr:rvnFUJITSU:rnFJNB1E6:*:cvrS6420:*");
MODULE_ALIAS("dmi:*:svnFUJITSU:*:pvr:rvnFUJITSU:rnFJNB19C:*:cvrS7020:*");
static struct pnp_device_id pnp_ids[] __used = {
{.id = "FUJ02bf"},
{.id = "FUJ02B1"},
{.id = "FUJ02E3"},
{.id = ""}
};
MODULE_DEVICE_TABLE(pnp, pnp_ids);