openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/mips/kernel/branch.c

907 lines
21 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1996, 97, 2000, 2001 by Ralf Baechle
* Copyright (C) 2001 MIPS Technologies, Inc.
*/
#include <linux/kernel.h>
sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-09 01:51:30 +08:00
#include <linux/sched/signal.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/signal.h>
MIPS: kernel: Audit and remove any unnecessary uses of module.h Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace as needed. In the case of the n32/o32 files, we have to get rid of a couple no-op MODULE_ tags to facilitate the module.h removal. They piggy back off the fs/ elf binary support, which is also a bool Kconfig. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14032/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-08-22 03:58:13 +08:00
#include <linux/export.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/branch.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
__compute_return_epc() uses CFC1 instruction which might result in a coprocessor unusable exception since the process can lose its fpu context by preemption. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-05-09 21:16:07 +08:00
#include <asm/fpu.h>
MIPS: microMIPS: Support handling of delay slots. Add logic needed to properly calculate exceptions for delay slots when in microMIPS mode. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 02:08:40 +08:00
#include <asm/fpu_emulator.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/inst.h>
MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6 MIPS R6 removed quite a few R2 instructions. However, there is plenty of <R6 userland code so we add an in-kernel emulator so we can still be able to execute all R2 userland out there. The emulator comes with a handy debugfs under /mips/ directory (r2-emul-stats) to provide some basic statistics of the instructions that are being emulated. Below are some statistics from booting a minimal buildroot image: Instruction Total BDslot ------------------------------ movs 236969 0 hilo 56686 0 muls 55279 0 divs 10941 0 dsps 0 0 bops 1 0 traps 0 0 fpus 0 0 loads 214981 17 stores 103364 0 llsc 56898 0 dsemul 150418 0 jr 370158 bltzl 43 bgezl 1594 bltzll 0 bgezll 0 bltzal 39 bgezal 39 beql 14503 bnel 138741 blezl 0 bgtzl 3988 Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-12-03 23:47:03 +08:00
#include <asm/mips-r2-to-r6-emul.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/ptrace.h>
Replace <asm/uaccess.h> with <linux/uaccess.h> globally This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-25 03:46:01 +08:00
#include <linux/uaccess.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
MIPS: microMIPS: Support handling of delay slots. Add logic needed to properly calculate exceptions for delay slots when in microMIPS mode. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 02:08:40 +08:00
/*
MIPS: MIPS16e: Support handling of delay slots. Add logic needed to properly calculate exceptions for delay slots when in MIPS16e mode. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 02:45:19 +08:00
* Calculate and return exception PC in case of branch delay slot
* for microMIPS and MIPS16e. It does not clear the ISA mode bit.
MIPS: microMIPS: Support handling of delay slots. Add logic needed to properly calculate exceptions for delay slots when in microMIPS mode. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 02:08:40 +08:00
*/
int __isa_exception_epc(struct pt_regs *regs)
{
unsigned short inst;
MIPS: MIPS16e: Support handling of delay slots. Add logic needed to properly calculate exceptions for delay slots when in MIPS16e mode. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 02:45:19 +08:00
long epc = regs->cp0_epc;
MIPS: microMIPS: Support handling of delay slots. Add logic needed to properly calculate exceptions for delay slots when in microMIPS mode. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 02:08:40 +08:00
/* Calculate exception PC in branch delay slot. */
if (__get_user(inst, (u16 __user *) msk_isa16_mode(epc))) {
/* This should never happen because delay slot was checked. */
signal: Remove task parameter from force_sig All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-23 23:17:27 +08:00
force_sig(SIGSEGV);
MIPS: microMIPS: Support handling of delay slots. Add logic needed to properly calculate exceptions for delay slots when in microMIPS mode. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 02:08:40 +08:00
return epc;
}
MIPS: MIPS16e: Support handling of delay slots. Add logic needed to properly calculate exceptions for delay slots when in MIPS16e mode. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 02:45:19 +08:00
if (cpu_has_mips16) {
MIPS: LLVMLinux: Fix a 'cast to type not present in union' error. Remove a cast to the 'mips16e_instruction' union inside an if condition and instead do an assignment to a local 'union mips16e_instruction' variable's 'full' member before the if statement and use this variable in the if condition. This is the error message reported by clang: arch/mips/kernel/branch.c:38:8: error: cast to union type from type 'unsigned short' not present in union if (((union mips16e_instruction)inst).ri.opcode ^ ~~~~ The changed code can be compiled successfully by both gcc and clang. Signed-off-by: Toma Tabacu <toma.tabacu@imgtec.com> Signed-off-by: Daniel Sanders <daniel.sanders@imgtec.com> Cc: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Cc: David Daney <david.daney@cavium.com> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9312/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-24 23:25:09 +08:00
union mips16e_instruction inst_mips16e;
inst_mips16e.full = inst;
if (inst_mips16e.ri.opcode == MIPS16e_jal_op)
MIPS: MIPS16e: Support handling of delay slots. Add logic needed to properly calculate exceptions for delay slots when in MIPS16e mode. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 02:45:19 +08:00
epc += 4;
else
epc += 2;
} else if (mm_insn_16bit(inst))
MIPS: microMIPS: Support handling of delay slots. Add logic needed to properly calculate exceptions for delay slots when in microMIPS mode. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 02:08:40 +08:00
epc += 2;
else
epc += 4;
return epc;
}
MIPS: Sort out mm_isBranchInstr. mm_isBranchInstr() did reside in the math emu code even though it logically is separate and also is used outside the math emu code. In addition GCC 4.9.0 leaves the following unnnecessarily bloated function body for a non-microMIPS configuration: <mm_isBranchInstr>: 105c: afa50004 sw a1,4(sp) 1060: afa60008 sw a2,8(sp) 1064: afa7000c sw a3,12(sp) 1068: 03e00008 jr ra 106c: 00001021 move v0,zero which stores arguments that are never going to be used on the stack frame. Move mm_isBranchInstr() from cp1emu.c to branch.c, then split mm_isBranchInstr() into a __mm_isBranchInstr() core and a mm_isBranchInstr() wrapper inline function which only invokes __mm_isBranchInstr() on microMIPS configurations. This shaves off 112 bytes off the kernel and improves code flow a bit. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-04-29 21:21:24 +08:00
/* (microMIPS) Convert 16-bit register encoding to 32-bit register encoding. */
static const unsigned int reg16to32map[8] = {16, 17, 2, 3, 4, 5, 6, 7};
int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
unsigned long *contpc)
{
union mips_instruction insn = (union mips_instruction)dec_insn.insn;
MIPS: Don't use bc_false uninitialized in __mm_isBranchInstr clang warns: arch/mips/kernel/branch.c:148:8: error: variable 'bc_false' is used uninitialized whenever switch case is taken [-Werror,-Wsometimes-uninitialized] case mm_bc2t_op: ^~~~~~~~~~ arch/mips/kernel/branch.c:157:8: note: uninitialized use occurs here if (bc_false) ^~~~~~~~ arch/mips/kernel/branch.c:149:8: error: variable 'bc_false' is used uninitialized whenever switch case is taken [-Werror,-Wsometimes-uninitialized] case mm_bc1t_op: ^~~~~~~~~~ arch/mips/kernel/branch.c:157:8: note: uninitialized use occurs here if (bc_false) ^~~~~~~~ arch/mips/kernel/branch.c:142:4: note: variable 'bc_false' is declared here int bc_false = 0; ^ 2 errors generated. When mm_bc1t_op and mm_bc2t_op are taken, the bc_false initialization does not happen, which leads to a garbage value upon use, as illustrated below with a small sample program. $ mipsel-linux-gnu-gcc --version | head -n1 mipsel-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0 $ clang --version | head -n1 ClangBuiltLinux clang version 9.0.0 (git://github.com/llvm/llvm-project 544315b4197034a3be8acd12cba56a75fb1f08dc) (based on LLVM 9.0.0svn) $ cat test.c #include <stdio.h> static void switch_scoped(int opcode) { switch (opcode) { case 1: case 2: { int bc_false = 0; bc_false = 4; case 3: case 4: printf("\t* switch scoped bc_false = %d\n", bc_false); } } } static void function_scoped(int opcode) { int bc_false = 0; switch (opcode) { case 1: case 2: { bc_false = 4; case 3: case 4: printf("\t* function scoped bc_false = %d\n", bc_false); } } } int main(void) { int opcode; for (opcode = 1; opcode < 5; opcode++) { printf("opcode = %d:\n", opcode); switch_scoped(opcode); function_scoped(opcode); printf("\n"); } return 0; } $ mipsel-linux-gnu-gcc -std=gnu89 -static test.c && \ qemu-mipsel a.out opcode = 1: * switch scoped bc_false = 4 * function scoped bc_false = 4 opcode = 2: * switch scoped bc_false = 4 * function scoped bc_false = 4 opcode = 3: * switch scoped bc_false = 2147483004 * function scoped bc_false = 0 opcode = 4: * switch scoped bc_false = 2147483004 * function scoped bc_false = 0 $ clang -std=gnu89 --target=mipsel-linux-gnu -m32 -static test.c && \ qemu-mipsel a.out opcode = 1: * switch scoped bc_false = 4 * function scoped bc_false = 4 opcode = 2: * switch scoped bc_false = 4 * function scoped bc_false = 4 opcode = 3: * switch scoped bc_false = 2147483004 * function scoped bc_false = 0 opcode = 4: * switch scoped bc_false = 2147483004 * function scoped bc_false = 0 Move the definition up so that we get the right behavior and mark it __maybe_unused as it will not be used when CONFIG_MIPS_FP_SUPPORT isn't enabled. Fixes: 6a1cc218b9cc ("MIPS: branch: Remove FP branch handling when CONFIG_MIPS_FP_SUPPORT=n") Link: https://github.com/ClangBuiltLinux/linux/issues/603 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: clang-built-linux@googlegroups.com
2019-08-12 11:31:16 +08:00
int __maybe_unused bc_false = 0;
MIPS: Sort out mm_isBranchInstr. mm_isBranchInstr() did reside in the math emu code even though it logically is separate and also is used outside the math emu code. In addition GCC 4.9.0 leaves the following unnnecessarily bloated function body for a non-microMIPS configuration: <mm_isBranchInstr>: 105c: afa50004 sw a1,4(sp) 1060: afa60008 sw a2,8(sp) 1064: afa7000c sw a3,12(sp) 1068: 03e00008 jr ra 106c: 00001021 move v0,zero which stores arguments that are never going to be used on the stack frame. Move mm_isBranchInstr() from cp1emu.c to branch.c, then split mm_isBranchInstr() into a __mm_isBranchInstr() core and a mm_isBranchInstr() wrapper inline function which only invokes __mm_isBranchInstr() on microMIPS configurations. This shaves off 112 bytes off the kernel and improves code flow a bit. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-04-29 21:21:24 +08:00
if (!cpu_has_mmips)
return 0;
switch (insn.mm_i_format.opcode) {
case mm_pool32a_op:
if ((insn.mm_i_format.simmediate & MM_POOL32A_MINOR_MASK) ==
mm_pool32axf_op) {
switch (insn.mm_i_format.simmediate >>
MM_POOL32A_MINOR_SHIFT) {
case mm_jalr_op:
case mm_jalrhb_op:
case mm_jalrs_op:
case mm_jalrshb_op:
if (insn.mm_i_format.rt != 0) /* Not mm_jr */
regs->regs[insn.mm_i_format.rt] =
regs->cp0_epc +
dec_insn.pc_inc +
dec_insn.next_pc_inc;
*contpc = regs->regs[insn.mm_i_format.rs];
return 1;
}
}
break;
case mm_pool32i_op:
switch (insn.mm_i_format.rt) {
case mm_bltzals_op:
case mm_bltzal_op:
regs->regs[31] = regs->cp0_epc +
dec_insn.pc_inc +
dec_insn.next_pc_inc;
/* Fall through */
case mm_bltz_op:
if ((long)regs->regs[insn.mm_i_format.rs] < 0)
*contpc = regs->cp0_epc +
dec_insn.pc_inc +
(insn.mm_i_format.simmediate << 1);
else
*contpc = regs->cp0_epc +
dec_insn.pc_inc +
dec_insn.next_pc_inc;
return 1;
case mm_bgezals_op:
case mm_bgezal_op:
regs->regs[31] = regs->cp0_epc +
dec_insn.pc_inc +
dec_insn.next_pc_inc;
/* Fall through */
case mm_bgez_op:
if ((long)regs->regs[insn.mm_i_format.rs] >= 0)
*contpc = regs->cp0_epc +
dec_insn.pc_inc +
(insn.mm_i_format.simmediate << 1);
else
*contpc = regs->cp0_epc +
dec_insn.pc_inc +
dec_insn.next_pc_inc;
return 1;
case mm_blez_op:
if ((long)regs->regs[insn.mm_i_format.rs] <= 0)
*contpc = regs->cp0_epc +
dec_insn.pc_inc +
(insn.mm_i_format.simmediate << 1);
else
*contpc = regs->cp0_epc +
dec_insn.pc_inc +
dec_insn.next_pc_inc;
return 1;
case mm_bgtz_op:
if ((long)regs->regs[insn.mm_i_format.rs] <= 0)
*contpc = regs->cp0_epc +
dec_insn.pc_inc +
(insn.mm_i_format.simmediate << 1);
else
*contpc = regs->cp0_epc +
dec_insn.pc_inc +
dec_insn.next_pc_inc;
return 1;
MIPS: branch: Remove FP branch handling when CONFIG_MIPS_FP_SUPPORT=n When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so remove the floating point branch support from __compute_return_epc_for_insn() & __mm_isBranchInstr(). This code should never be needed & more importantly relies upon FPU state in struct task_struct which will later be removed. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21017/ Cc: linux-mips@linux-mips.org
2018-11-08 07:14:06 +08:00
#ifdef CONFIG_MIPS_FP_SUPPORT
MIPS: Sort out mm_isBranchInstr. mm_isBranchInstr() did reside in the math emu code even though it logically is separate and also is used outside the math emu code. In addition GCC 4.9.0 leaves the following unnnecessarily bloated function body for a non-microMIPS configuration: <mm_isBranchInstr>: 105c: afa50004 sw a1,4(sp) 1060: afa60008 sw a2,8(sp) 1064: afa7000c sw a3,12(sp) 1068: 03e00008 jr ra 106c: 00001021 move v0,zero which stores arguments that are never going to be used on the stack frame. Move mm_isBranchInstr() from cp1emu.c to branch.c, then split mm_isBranchInstr() into a __mm_isBranchInstr() core and a mm_isBranchInstr() wrapper inline function which only invokes __mm_isBranchInstr() on microMIPS configurations. This shaves off 112 bytes off the kernel and improves code flow a bit. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-04-29 21:21:24 +08:00
case mm_bc2f_op:
MIPS: branch: Remove FP branch handling when CONFIG_MIPS_FP_SUPPORT=n When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so remove the floating point branch support from __compute_return_epc_for_insn() & __mm_isBranchInstr(). This code should never be needed & more importantly relies upon FPU state in struct task_struct which will later be removed. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21017/ Cc: linux-mips@linux-mips.org
2018-11-08 07:14:06 +08:00
case mm_bc1f_op: {
unsigned int fcr31;
unsigned int bit;
MIPS: Sort out mm_isBranchInstr. mm_isBranchInstr() did reside in the math emu code even though it logically is separate and also is used outside the math emu code. In addition GCC 4.9.0 leaves the following unnnecessarily bloated function body for a non-microMIPS configuration: <mm_isBranchInstr>: 105c: afa50004 sw a1,4(sp) 1060: afa60008 sw a2,8(sp) 1064: afa7000c sw a3,12(sp) 1068: 03e00008 jr ra 106c: 00001021 move v0,zero which stores arguments that are never going to be used on the stack frame. Move mm_isBranchInstr() from cp1emu.c to branch.c, then split mm_isBranchInstr() into a __mm_isBranchInstr() core and a mm_isBranchInstr() wrapper inline function which only invokes __mm_isBranchInstr() on microMIPS configurations. This shaves off 112 bytes off the kernel and improves code flow a bit. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-04-29 21:21:24 +08:00
bc_false = 1;
/* Fall through */
case mm_bc2t_op:
case mm_bc1t_op:
preempt_disable();
if (is_fpu_owner())
MIPS: Fix build with binutils 2.24.51+ Starting with version 2.24.51.20140728 MIPS binutils complain loudly about mixing soft-float and hard-float object files, leading to this build failure since GCC is invoked with "-msoft-float" on MIPS: {standard input}: Warning: .gnu_attribute 4,3 requires `softfloat' LD arch/mips/alchemy/common/built-in.o mipsel-softfloat-linux-gnu-ld: Warning: arch/mips/alchemy/common/built-in.o uses -msoft-float (set by arch/mips/alchemy/common/prom.o), arch/mips/alchemy/common/sleeper.o uses -mhard-float To fix this, we detect if GAS is new enough to support "-msoft-float" command option, and if it does, we can let GCC pass it to GAS; but then we also need to sprinkle the files which make use of floating point registers with the necessary ".set hardfloat" directives. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: Markos Chandras <Markos.Chandras@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/8355/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-07 21:13:54 +08:00
fcr31 = read_32bit_cp1_register(CP1_STATUS);
MIPS: Sort out mm_isBranchInstr. mm_isBranchInstr() did reside in the math emu code even though it logically is separate and also is used outside the math emu code. In addition GCC 4.9.0 leaves the following unnnecessarily bloated function body for a non-microMIPS configuration: <mm_isBranchInstr>: 105c: afa50004 sw a1,4(sp) 1060: afa60008 sw a2,8(sp) 1064: afa7000c sw a3,12(sp) 1068: 03e00008 jr ra 106c: 00001021 move v0,zero which stores arguments that are never going to be used on the stack frame. Move mm_isBranchInstr() from cp1emu.c to branch.c, then split mm_isBranchInstr() into a __mm_isBranchInstr() core and a mm_isBranchInstr() wrapper inline function which only invokes __mm_isBranchInstr() on microMIPS configurations. This shaves off 112 bytes off the kernel and improves code flow a bit. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-04-29 21:21:24 +08:00
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();
if (bc_false)
fcr31 = ~fcr31;
bit = (insn.mm_i_format.rs >> 2);
bit += (bit != 0);
bit += 23;
if (fcr31 & (1 << bit))
*contpc = regs->cp0_epc +
dec_insn.pc_inc +
(insn.mm_i_format.simmediate << 1);
else
*contpc = regs->cp0_epc +
dec_insn.pc_inc + dec_insn.next_pc_inc;
return 1;
}
MIPS: branch: Remove FP branch handling when CONFIG_MIPS_FP_SUPPORT=n When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so remove the floating point branch support from __compute_return_epc_for_insn() & __mm_isBranchInstr(). This code should never be needed & more importantly relies upon FPU state in struct task_struct which will later be removed. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21017/ Cc: linux-mips@linux-mips.org
2018-11-08 07:14:06 +08:00
#endif /* CONFIG_MIPS_FP_SUPPORT */
}
MIPS: Sort out mm_isBranchInstr. mm_isBranchInstr() did reside in the math emu code even though it logically is separate and also is used outside the math emu code. In addition GCC 4.9.0 leaves the following unnnecessarily bloated function body for a non-microMIPS configuration: <mm_isBranchInstr>: 105c: afa50004 sw a1,4(sp) 1060: afa60008 sw a2,8(sp) 1064: afa7000c sw a3,12(sp) 1068: 03e00008 jr ra 106c: 00001021 move v0,zero which stores arguments that are never going to be used on the stack frame. Move mm_isBranchInstr() from cp1emu.c to branch.c, then split mm_isBranchInstr() into a __mm_isBranchInstr() core and a mm_isBranchInstr() wrapper inline function which only invokes __mm_isBranchInstr() on microMIPS configurations. This shaves off 112 bytes off the kernel and improves code flow a bit. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-04-29 21:21:24 +08:00
break;
case mm_pool16c_op:
switch (insn.mm_i_format.rt) {
case mm_jalr16_op:
case mm_jalrs16_op:
regs->regs[31] = regs->cp0_epc +
dec_insn.pc_inc + dec_insn.next_pc_inc;
/* Fall through */
case mm_jr16_op:
*contpc = regs->regs[insn.mm_i_format.rs];
return 1;
}
break;
case mm_beqz16_op:
if ((long)regs->regs[reg16to32map[insn.mm_b1_format.rs]] == 0)
*contpc = regs->cp0_epc +
dec_insn.pc_inc +
(insn.mm_b1_format.simmediate << 1);
else
*contpc = regs->cp0_epc +
dec_insn.pc_inc + dec_insn.next_pc_inc;
return 1;
case mm_bnez16_op:
if ((long)regs->regs[reg16to32map[insn.mm_b1_format.rs]] != 0)
*contpc = regs->cp0_epc +
dec_insn.pc_inc +
(insn.mm_b1_format.simmediate << 1);
else
*contpc = regs->cp0_epc +
dec_insn.pc_inc + dec_insn.next_pc_inc;
return 1;
case mm_b16_op:
*contpc = regs->cp0_epc + dec_insn.pc_inc +
(insn.mm_b0_format.simmediate << 1);
return 1;
case mm_beq32_op:
if (regs->regs[insn.mm_i_format.rs] ==
regs->regs[insn.mm_i_format.rt])
*contpc = regs->cp0_epc +
dec_insn.pc_inc +
(insn.mm_i_format.simmediate << 1);
else
*contpc = regs->cp0_epc +
dec_insn.pc_inc +
dec_insn.next_pc_inc;
return 1;
case mm_bne32_op:
if (regs->regs[insn.mm_i_format.rs] !=
regs->regs[insn.mm_i_format.rt])
*contpc = regs->cp0_epc +
dec_insn.pc_inc +
(insn.mm_i_format.simmediate << 1);
else
*contpc = regs->cp0_epc +
dec_insn.pc_inc + dec_insn.next_pc_inc;
return 1;
case mm_jalx32_op:
regs->regs[31] = regs->cp0_epc +
dec_insn.pc_inc + dec_insn.next_pc_inc;
*contpc = regs->cp0_epc + dec_insn.pc_inc;
*contpc >>= 28;
*contpc <<= 28;
*contpc |= (insn.j_format.target << 2);
return 1;
case mm_jals32_op:
case mm_jal32_op:
regs->regs[31] = regs->cp0_epc +
dec_insn.pc_inc + dec_insn.next_pc_inc;
/* Fall through */
case mm_j32_op:
*contpc = regs->cp0_epc + dec_insn.pc_inc;
*contpc >>= 27;
*contpc <<= 27;
*contpc |= (insn.j_format.target << 1);
set_isa16_mode(*contpc);
return 1;
}
return 0;
}
MIPS: microMIPS: Support handling of delay slots. Add logic needed to properly calculate exceptions for delay slots when in microMIPS mode. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 02:08:40 +08:00
/*
* Compute return address and emulate branch in microMIPS mode after an
* exception only. It does not handle compact branches/jumps and cannot
* be used in interrupt context. (Compact branches/jumps do not cause
* exceptions.)
*/
int __microMIPS_compute_return_epc(struct pt_regs *regs)
{
u16 __user *pc16;
u16 halfword;
unsigned int word;
unsigned long contpc;
struct mm_decoded_insn mminsn = { 0 };
mminsn.micro_mips_mode = 1;
/* This load never faults. */
pc16 = (unsigned short __user *)msk_isa16_mode(regs->cp0_epc);
__get_user(halfword, pc16);
pc16++;
contpc = regs->cp0_epc + 2;
word = ((unsigned int)halfword << 16);
mminsn.pc_inc = 2;
if (!mm_insn_16bit(halfword)) {
__get_user(halfword, pc16);
pc16++;
contpc = regs->cp0_epc + 4;
mminsn.pc_inc = 4;
word |= halfword;
}
mminsn.insn = word;
if (get_user(halfword, pc16))
goto sigsegv;
mminsn.next_pc_inc = 2;
word = ((unsigned int)halfword << 16);
if (!mm_insn_16bit(halfword)) {
pc16++;
if (get_user(halfword, pc16))
goto sigsegv;
mminsn.next_pc_inc = 4;
word |= halfword;
}
mminsn.next_insn = word;
mm_isBranchInstr(regs, mminsn, &contpc);
regs->cp0_epc = contpc;
return 0;
sigsegv:
signal: Remove task parameter from force_sig All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-23 23:17:27 +08:00
force_sig(SIGSEGV);
MIPS: microMIPS: Support handling of delay slots. Add logic needed to properly calculate exceptions for delay slots when in microMIPS mode. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 02:08:40 +08:00
return -EFAULT;
}
MIPS: MIPS16e: Support handling of delay slots. Add logic needed to properly calculate exceptions for delay slots when in MIPS16e mode. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 02:45:19 +08:00
/*
* Compute return address and emulate branch in MIPS16e mode after an
* exception only. It does not handle compact branches/jumps and cannot
* be used in interrupt context. (Compact branches/jumps do not cause
* exceptions.)
*/
int __MIPS16e_compute_return_epc(struct pt_regs *regs)
{
u16 __user *addr;
union mips16e_instruction inst;
u16 inst2;
u32 fullinst;
long epc;
epc = regs->cp0_epc;
/* Read the instruction. */
addr = (u16 __user *)msk_isa16_mode(epc);
if (__get_user(inst.full, addr)) {
signal: Remove task parameter from force_sig All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-23 23:17:27 +08:00
force_sig(SIGSEGV);
MIPS: MIPS16e: Support handling of delay slots. Add logic needed to properly calculate exceptions for delay slots when in MIPS16e mode. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 02:45:19 +08:00
return -EFAULT;
}
switch (inst.ri.opcode) {
case MIPS16e_extend_op:
regs->cp0_epc += 4;
return 0;
/*
* JAL and JALX in MIPS16e mode
*/
case MIPS16e_jal_op:
addr += 1;
if (__get_user(inst2, addr)) {
signal: Remove task parameter from force_sig All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-23 23:17:27 +08:00
force_sig(SIGSEGV);
MIPS: MIPS16e: Support handling of delay slots. Add logic needed to properly calculate exceptions for delay slots when in MIPS16e mode. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 02:45:19 +08:00
return -EFAULT;
}
fullinst = ((unsigned)inst.full << 16) | inst2;
regs->regs[31] = epc + 6;
epc += 4;
epc >>= 28;
epc <<= 28;
/*
* JAL:5 X:1 TARGET[20-16]:5 TARGET[25:21]:5 TARGET[15:0]:16
*
* ......TARGET[15:0].................TARGET[20:16]...........
* ......TARGET[25:21]
*/
epc |=
((fullinst & 0xffff) << 2) | ((fullinst & 0x3e00000) >> 3) |
((fullinst & 0x1f0000) << 7);
if (!inst.jal.x)
set_isa16_mode(epc); /* Set ISA mode bit. */
regs->cp0_epc = epc;
return 0;
/*
* J(AL)R(C)
*/
case MIPS16e_rr_op:
if (inst.rr.func == MIPS16e_jr_func) {
if (inst.rr.ra)
regs->cp0_epc = regs->regs[31];
else
regs->cp0_epc =
regs->regs[reg16to32[inst.rr.rx]];
if (inst.rr.l) {
if (inst.rr.nd)
regs->regs[31] = epc + 2;
else
regs->regs[31] = epc + 4;
}
return 0;
}
break;
}
/*
* All other cases have no branch delay slot and are 16-bits.
* Branches do not cause an exception.
*/
regs->cp0_epc += 2;
return 0;
}
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
/**
* __compute_return_epc_for_insn - Computes the return address and do emulate
* branch simulation, if required.
*
* @regs: Pointer to pt_regs
* @insn: branch instruction to decode
MIPS: Use proper kernel-doc Return keyword For reference: * https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html#function-documentation Fix non-fatal warning: arch/mips/kernel/branch.c:418: warning: Excess function parameter 'returns' description in '__compute_return_epc_for_insn' Signed-off-by: Mathieu Malaterre <malat@debian.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Maciej W. Rozycki <macro@mips.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18031/ [jhogan@kernel.org: Expand subject slightly] Signed-off-by: James Hogan <jhogan@kernel.org>
2017-12-27 19:07:53 +08:00
* Return: -EFAULT on error and forces SIGILL, and on success
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
* returns 0 or BRANCH_LIKELY_TAKEN as appropriate after
* evaluating the branch.
MIPS: Emulate the new MIPS R6 B{L,G}Ε{Z,}{AL,}C instructions MIPS R6 added the following four instructions which share the BLEZ and BLEZL opcodes: BLEZALC: Compact branch-and-link if GPR rt is <= to zero BGEZALC: Compact branch-and-link if GPR rt is >= to zero BLEZC : Compact branch if GPR rt is <= to zero BGEZC : Compact branch if GPR rt is >= to zero BGEC : Compact branch if GPR rs is less than or equal to GPR rt BGEUC : Similar to BGEC but unsigned. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 20:57:54 +08:00
*
* MIPS R6 Compact branches and forbidden slots:
* Compact branches do not throw exceptions because they do
* not have delay slots. The forbidden slot instruction ($PC+4)
* is only executed if the branch was not taken. Otherwise the
* forbidden slot is skipped entirely. This means that the
* only possible reason to be here because of a MIPS R6 compact
* branch instruction is that the forbidden slot has thrown one.
* In that case the branch was not taken, so the EPC can be safely
* set to EPC + 8.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
int __compute_return_epc_for_insn(struct pt_regs *regs,
union mips_instruction insn)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
long epc = regs->cp0_epc;
MIPS: branch: Remove FP branch handling when CONFIG_MIPS_FP_SUPPORT=n When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so remove the floating point branch support from __compute_return_epc_for_insn() & __mm_isBranchInstr(). This code should never be needed & more importantly relies upon FPU state in struct task_struct which will later be removed. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21017/ Cc: linux-mips@linux-mips.org
2018-11-08 07:14:06 +08:00
unsigned int dspcontrol;
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
int ret = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
switch (insn.i_format.opcode) {
/*
* jr and jalr are in r_format format.
*/
case spec_op:
switch (insn.r_format.func) {
case jalr_op:
regs->regs[insn.r_format.rd] = epc + 8;
/* Fall through */
case jr_op:
MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6 The MIPS R6 JR instruction is an alias to the JALR one, so it may need emulation for non-R6 userlands. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-25 23:54:14 +08:00
if (NO_R6EMU && insn.r_format.func == jr_op)
MIPS: Rename `sigill_r6' to `sigill_r2r6' in `__compute_return_epc_for_insn' Use the more accurate `sigill_r2r6' name for the label used in the case of sending SIGILL in the absence of the instruction emulator for an earlier ISA level instruction that has been removed as from the R6 ISA, so that the `sigill_r6' name is freed for the situation where an R6 instruction is not supposed to be interpreted, because the executing processor does not support the R6 ISA. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/16397/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:09:23 +08:00
goto sigill_r2r6;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
regs->cp0_epc = regs->regs[insn.r_format.rs];
break;
}
break;
/*
* This group contains:
* bltz_op, bgez_op, bltzl_op, bgezl_op,
* bltzal_op, bgezal_op, bltzall_op, bgezall_op.
*/
case bcond_op:
switch (insn.i_format.rt) {
case bltzl_op:
MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6 MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 00:02:23 +08:00
if (NO_R6EMU)
MIPS: Rename `sigill_r6' to `sigill_r2r6' in `__compute_return_epc_for_insn' Use the more accurate `sigill_r2r6' name for the label used in the case of sending SIGILL in the absence of the instruction emulator for an earlier ISA level instruction that has been removed as from the R6 ISA, so that the `sigill_r6' name is freed for the situation where an R6 instruction is not supposed to be interpreted, because the executing processor does not support the R6 ISA. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/16397/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:09:23 +08:00
goto sigill_r2r6;
mips: annotate implicit fall throughs There is a plan to build the kernel with -Wimplicit-fallthrough and these places in the code produced warnings. Fix them up. This patch produces no change in behaviour, but should be reviewed in case these are actually bugs not intentional fallthoughs. Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Kees Cook <keescook@google.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2018-12-04 05:23:43 +08:00
/* fall through */
MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6 MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 00:02:23 +08:00
case bltz_op:
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
if ((long)regs->regs[insn.i_format.rs] < 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
epc = epc + 4 + (insn.i_format.simmediate << 2);
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
if (insn.i_format.rt == bltzl_op)
ret = BRANCH_LIKELY_TAKEN;
} else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
epc += 8;
regs->cp0_epc = epc;
break;
case bgezl_op:
MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6 MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 00:02:23 +08:00
if (NO_R6EMU)
MIPS: Rename `sigill_r6' to `sigill_r2r6' in `__compute_return_epc_for_insn' Use the more accurate `sigill_r2r6' name for the label used in the case of sending SIGILL in the absence of the instruction emulator for an earlier ISA level instruction that has been removed as from the R6 ISA, so that the `sigill_r6' name is freed for the situation where an R6 instruction is not supposed to be interpreted, because the executing processor does not support the R6 ISA. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/16397/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:09:23 +08:00
goto sigill_r2r6;
mips: annotate implicit fall throughs There is a plan to build the kernel with -Wimplicit-fallthrough and these places in the code produced warnings. Fix them up. This patch produces no change in behaviour, but should be reviewed in case these are actually bugs not intentional fallthoughs. Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Kees Cook <keescook@google.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2018-12-04 05:23:43 +08:00
/* fall through */
MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6 MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 00:02:23 +08:00
case bgez_op:
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
if ((long)regs->regs[insn.i_format.rs] >= 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
epc = epc + 4 + (insn.i_format.simmediate << 2);
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
if (insn.i_format.rt == bgezl_op)
ret = BRANCH_LIKELY_TAKEN;
} else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
epc += 8;
regs->cp0_epc = epc;
break;
case bltzal_op:
case bltzall_op:
MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6 MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 00:02:23 +08:00
if (NO_R6EMU && (insn.i_format.rs ||
MIPS: Send SIGILL for linked branches in `__compute_return_epc_for_insn' Fix commit 319824eabc3f ("MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6") and also send SIGILL rather than returning -SIGILL for BLTZAL, BLTZALL, BGEZAL and BGEZALL instruction encodings no longer supported in R6, except where emulated. Returning -SIGILL is never correct as the API defines this function's result upon error to be -EFAULT and a signal actually issued. Fixes: 319824eabc3f ("MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6") Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/16398/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:12:53 +08:00
insn.i_format.rt == bltzall_op))
goto sigill_r2r6;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
regs->regs[31] = epc + 8;
MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6 MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 00:02:23 +08:00
/*
* OK we are here either because we hit a NAL
* instruction or because we are emulating an
MIPS: Spelling fix lets -> let's As noticed by Sergei in the discussion of Andrea Gelmini's patch series. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
2016-05-22 06:39:18 +08:00
* old bltzal{,l} one. Let's figure out what the
MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6 MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 00:02:23 +08:00
* case really is.
*/
if (!insn.i_format.rs) {
/*
* NAL or BLTZAL with rs == 0
* Doesn't matter if we are R6 or not. The
* result is the same
*/
regs->cp0_epc += 4 +
(insn.i_format.simmediate << 2);
break;
}
/* Now do the real thing for non-R6 BLTZAL{,L} */
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
if ((long)regs->regs[insn.i_format.rs] < 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
epc = epc + 4 + (insn.i_format.simmediate << 2);
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
if (insn.i_format.rt == bltzall_op)
ret = BRANCH_LIKELY_TAKEN;
} else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
epc += 8;
regs->cp0_epc = epc;
break;
case bgezal_op:
case bgezall_op:
MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6 MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 00:02:23 +08:00
if (NO_R6EMU && (insn.i_format.rs ||
MIPS: Send SIGILL for linked branches in `__compute_return_epc_for_insn' Fix commit 319824eabc3f ("MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6") and also send SIGILL rather than returning -SIGILL for BLTZAL, BLTZALL, BGEZAL and BGEZALL instruction encodings no longer supported in R6, except where emulated. Returning -SIGILL is never correct as the API defines this function's result upon error to be -EFAULT and a signal actually issued. Fixes: 319824eabc3f ("MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6") Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/16398/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:12:53 +08:00
insn.i_format.rt == bgezall_op))
goto sigill_r2r6;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
regs->regs[31] = epc + 8;
MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6 MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 00:02:23 +08:00
/*
* OK we are here either because we hit a BAL
* instruction or because we are emulating an
MIPS: Spelling fix lets -> let's As noticed by Sergei in the discussion of Andrea Gelmini's patch series. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
2016-05-22 06:39:18 +08:00
* old bgezal{,l} one. Let's figure out what the
MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6 MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 00:02:23 +08:00
* case really is.
*/
if (!insn.i_format.rs) {
/*
* BAL or BGEZAL with rs == 0
* Doesn't matter if we are R6 or not. The
* result is the same
*/
regs->cp0_epc += 4 +
(insn.i_format.simmediate << 2);
break;
}
/* Now do the real thing for non-R6 BGEZAL{,L} */
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
if ((long)regs->regs[insn.i_format.rs] >= 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
epc = epc + 4 + (insn.i_format.simmediate << 2);
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
if (insn.i_format.rt == bgezall_op)
ret = BRANCH_LIKELY_TAKEN;
} else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
epc += 8;
regs->cp0_epc = epc;
break;
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
Support the MIPS32 / MIPS64 DSP ASE. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-05-31 19:49:19 +08:00
case bposge32_op:
if (!cpu_has_dsp)
MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6 The MIPS R6 JR instruction is an alias to the JALR one, so it may need emulation for non-R6 userlands. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-25 23:54:14 +08:00
goto sigill_dsp;
Support the MIPS32 / MIPS64 DSP ASE. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-05-31 19:49:19 +08:00
dspcontrol = rddsp(0x01);
if (dspcontrol >= 32) {
epc = epc + 4 + (insn.i_format.simmediate << 2);
} else
epc += 8;
regs->cp0_epc = epc;
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
break;
/*
* These are unconditional and in j_format.
*/
MIPS: Actually decode JALX in `__compute_return_epc_for_insn' Complement commit fb6883e5809c ("MIPS: microMIPS: Support handling of delay slots.") and actually decode the regular MIPS JALX major instruction opcode, the handling of which has been added with the said commit for EPC calculation in `__compute_return_epc_for_insn'. Fixes: fb6883e5809c ("MIPS: microMIPS: Support handling of delay slots.") Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.9+ Patchwork: https://patchwork.linux-mips.org/patch/16394/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:06:19 +08:00
case jalx_op:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
case jal_op:
regs->regs[31] = regs->cp0_epc + 8;
mips: annotate implicit fall throughs There is a plan to build the kernel with -Wimplicit-fallthrough and these places in the code produced warnings. Fix them up. This patch produces no change in behaviour, but should be reviewed in case these are actually bugs not intentional fallthoughs. Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Kees Cook <keescook@google.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2018-12-04 05:23:43 +08:00
/* fall through */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
case j_op:
epc += 4;
epc >>= 28;
epc <<= 28;
epc |= (insn.j_format.target << 2);
regs->cp0_epc = epc;
MIPS: microMIPS: Support handling of delay slots. Add logic needed to properly calculate exceptions for delay slots when in microMIPS mode. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-03-26 02:08:40 +08:00
if (insn.i_format.opcode == jalx_op)
set_isa16_mode(regs->cp0_epc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
/*
* These are conditional and in i_format.
*/
case beql_op:
MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6 MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 00:02:23 +08:00
if (NO_R6EMU)
MIPS: Rename `sigill_r6' to `sigill_r2r6' in `__compute_return_epc_for_insn' Use the more accurate `sigill_r2r6' name for the label used in the case of sending SIGILL in the absence of the instruction emulator for an earlier ISA level instruction that has been removed as from the R6 ISA, so that the `sigill_r6' name is freed for the situation where an R6 instruction is not supposed to be interpreted, because the executing processor does not support the R6 ISA. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/16397/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:09:23 +08:00
goto sigill_r2r6;
mips: annotate implicit fall throughs There is a plan to build the kernel with -Wimplicit-fallthrough and these places in the code produced warnings. Fix them up. This patch produces no change in behaviour, but should be reviewed in case these are actually bugs not intentional fallthoughs. Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Kees Cook <keescook@google.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2018-12-04 05:23:43 +08:00
/* fall through */
MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6 MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 00:02:23 +08:00
case beq_op:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (regs->regs[insn.i_format.rs] ==
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
regs->regs[insn.i_format.rt]) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
epc = epc + 4 + (insn.i_format.simmediate << 2);
MIPS: Fix branch emulation of branch likely instructions. Two issues: o For beql_op, beql_op, bne_op, bnel_op, blez_op, blezl_op, bgtz_op and bgtzl_op the wrong field was being checked for the instruction opcode. o For blez_op / blezl_op and bgtz_op / bgtzl_op the test was testing for the wrong opcode. This bug got introduced by d8d4e3ae0b5c179c0bfd3f0af5b352d13bea9cfa [MIPS Kprobes: Refactor branch emulation]. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Acked-by: Victor Kamensky <kamensky@cisco.com>
2014-05-23 05:19:00 +08:00
if (insn.i_format.opcode == beql_op)
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
ret = BRANCH_LIKELY_TAKEN;
} else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
epc += 8;
regs->cp0_epc = epc;
break;
case bnel_op:
MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6 MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 00:02:23 +08:00
if (NO_R6EMU)
MIPS: Rename `sigill_r6' to `sigill_r2r6' in `__compute_return_epc_for_insn' Use the more accurate `sigill_r2r6' name for the label used in the case of sending SIGILL in the absence of the instruction emulator for an earlier ISA level instruction that has been removed as from the R6 ISA, so that the `sigill_r6' name is freed for the situation where an R6 instruction is not supposed to be interpreted, because the executing processor does not support the R6 ISA. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/16397/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:09:23 +08:00
goto sigill_r2r6;
mips: annotate implicit fall throughs There is a plan to build the kernel with -Wimplicit-fallthrough and these places in the code produced warnings. Fix them up. This patch produces no change in behaviour, but should be reviewed in case these are actually bugs not intentional fallthoughs. Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Kees Cook <keescook@google.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2018-12-04 05:23:43 +08:00
/* fall through */
MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6 MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 00:02:23 +08:00
case bne_op:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (regs->regs[insn.i_format.rs] !=
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
regs->regs[insn.i_format.rt]) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
epc = epc + 4 + (insn.i_format.simmediate << 2);
MIPS: Fix branch emulation of branch likely instructions. Two issues: o For beql_op, beql_op, bne_op, bnel_op, blez_op, blezl_op, bgtz_op and bgtzl_op the wrong field was being checked for the instruction opcode. o For blez_op / blezl_op and bgtz_op / bgtzl_op the test was testing for the wrong opcode. This bug got introduced by d8d4e3ae0b5c179c0bfd3f0af5b352d13bea9cfa [MIPS Kprobes: Refactor branch emulation]. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Acked-by: Victor Kamensky <kamensky@cisco.com>
2014-05-23 05:19:00 +08:00
if (insn.i_format.opcode == bnel_op)
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
ret = BRANCH_LIKELY_TAKEN;
} else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
epc += 8;
regs->cp0_epc = epc;
break;
MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6 MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 00:02:23 +08:00
case blezl_op: /* not really i_format */
MIPS: Fix branch emulation for BLTC and BGEC instructions Commits f1b44067c19258b7614e3cd09dfe8d8e12ff5895 ("MIPS: Emulate the new MIPS R6 B{L,G}T{Z,}{AL,}C instructions") and commit a8ff66f52d3f17b5ae793955270675c197f73d6c ("MIPS: Emulate the new MIPS R6 B{L,G}E{Z,}{AL,}C instructions") added support for emulating various branch compact instructions. However, it missed the case for those which use the old BLEZL and BGTZL opcodes leading to random crashes when the R6 emulator is disabled. We fix this by ensuring that the 'rt' field is not zero which is always true for these branch compact instructions. Fixes: f1b44067c192 ("MIPS: Emulate the new MIPS R6 B{L,G}T{Z,}{AL,}C instructions") Fixes: a8ff66f52d3f ("MIPS: Emulate the new MIPS R6 B{L,G}E{Z,}{AL,}C instructions") Cc: <stable@vger.kernel.org> # 4.0+ Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/10582/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-24 16:52:00 +08:00
if (!insn.i_format.rt && NO_R6EMU)
MIPS: Rename `sigill_r6' to `sigill_r2r6' in `__compute_return_epc_for_insn' Use the more accurate `sigill_r2r6' name for the label used in the case of sending SIGILL in the absence of the instruction emulator for an earlier ISA level instruction that has been removed as from the R6 ISA, so that the `sigill_r6' name is freed for the situation where an R6 instruction is not supposed to be interpreted, because the executing processor does not support the R6 ISA. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/16397/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:09:23 +08:00
goto sigill_r2r6;
mips: annotate implicit fall throughs There is a plan to build the kernel with -Wimplicit-fallthrough and these places in the code produced warnings. Fix them up. This patch produces no change in behaviour, but should be reviewed in case these are actually bugs not intentional fallthoughs. Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Kees Cook <keescook@google.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2018-12-04 05:23:43 +08:00
/* fall through */
MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6 MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 00:02:23 +08:00
case blez_op:
MIPS: Emulate the new MIPS R6 B{L,G}Ε{Z,}{AL,}C instructions MIPS R6 added the following four instructions which share the BLEZ and BLEZL opcodes: BLEZALC: Compact branch-and-link if GPR rt is <= to zero BGEZALC: Compact branch-and-link if GPR rt is >= to zero BLEZC : Compact branch if GPR rt is <= to zero BGEZC : Compact branch if GPR rt is >= to zero BGEC : Compact branch if GPR rs is less than or equal to GPR rt BGEUC : Similar to BGEC but unsigned. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 20:57:54 +08:00
/*
* Compact branches for R6 for the
* blez and blezl opcodes.
* BLEZ | rs = 0 | rt != 0 == BLEZALC
* BLEZ | rs = rt != 0 == BGEZALC
* BLEZ | rs != 0 | rt != 0 == BGEUC
* BLEZL | rs = 0 | rt != 0 == BLEZC
* BLEZL | rs = rt != 0 == BGEZC
* BLEZL | rs != 0 | rt != 0 == BGEC
*
* For real BLEZ{,L}, rt is always 0.
*/
if (cpu_has_mips_r6 && insn.i_format.rt) {
if ((insn.i_format.opcode == blez_op) &&
((!insn.i_format.rs && insn.i_format.rt) ||
(insn.i_format.rs == insn.i_format.rt)))
regs->regs[31] = epc + 4;
regs->cp0_epc += 8;
break;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* rt field assumed to be zero */
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
if ((long)regs->regs[insn.i_format.rs] <= 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
epc = epc + 4 + (insn.i_format.simmediate << 2);
MIPS: Fix branch emulation of branch likely instructions. Two issues: o For beql_op, beql_op, bne_op, bnel_op, blez_op, blezl_op, bgtz_op and bgtzl_op the wrong field was being checked for the instruction opcode. o For blez_op / blezl_op and bgtz_op / bgtzl_op the test was testing for the wrong opcode. This bug got introduced by d8d4e3ae0b5c179c0bfd3f0af5b352d13bea9cfa [MIPS Kprobes: Refactor branch emulation]. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Acked-by: Victor Kamensky <kamensky@cisco.com>
2014-05-23 05:19:00 +08:00
if (insn.i_format.opcode == blezl_op)
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
ret = BRANCH_LIKELY_TAKEN;
} else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
epc += 8;
regs->cp0_epc = epc;
break;
case bgtzl_op:
MIPS: Fix branch emulation for BLTC and BGEC instructions Commits f1b44067c19258b7614e3cd09dfe8d8e12ff5895 ("MIPS: Emulate the new MIPS R6 B{L,G}T{Z,}{AL,}C instructions") and commit a8ff66f52d3f17b5ae793955270675c197f73d6c ("MIPS: Emulate the new MIPS R6 B{L,G}E{Z,}{AL,}C instructions") added support for emulating various branch compact instructions. However, it missed the case for those which use the old BLEZL and BGTZL opcodes leading to random crashes when the R6 emulator is disabled. We fix this by ensuring that the 'rt' field is not zero which is always true for these branch compact instructions. Fixes: f1b44067c192 ("MIPS: Emulate the new MIPS R6 B{L,G}T{Z,}{AL,}C instructions") Fixes: a8ff66f52d3f ("MIPS: Emulate the new MIPS R6 B{L,G}E{Z,}{AL,}C instructions") Cc: <stable@vger.kernel.org> # 4.0+ Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/10582/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-24 16:52:00 +08:00
if (!insn.i_format.rt && NO_R6EMU)
MIPS: Rename `sigill_r6' to `sigill_r2r6' in `__compute_return_epc_for_insn' Use the more accurate `sigill_r2r6' name for the label used in the case of sending SIGILL in the absence of the instruction emulator for an earlier ISA level instruction that has been removed as from the R6 ISA, so that the `sigill_r6' name is freed for the situation where an R6 instruction is not supposed to be interpreted, because the executing processor does not support the R6 ISA. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/16397/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:09:23 +08:00
goto sigill_r2r6;
mips: annotate implicit fall throughs There is a plan to build the kernel with -Wimplicit-fallthrough and these places in the code produced warnings. Fix them up. This patch produces no change in behaviour, but should be reviewed in case these are actually bugs not intentional fallthoughs. Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Kees Cook <keescook@google.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2018-12-04 05:23:43 +08:00
/* fall through */
MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6 MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 00:02:23 +08:00
case bgtz_op:
MIPS: Emulate the new MIPS R6 B{L,G}T{Z,}{AL,}C instructions MIPS R6 added the following four instructions which share the BGTZ and BGTZL opcode: BLTZALC: Compact branch-and-link if GPR rt is < to zero BGTZALC: Compact branch-and-link if GPR rt is > to zero BLTZL : Compact branch if GPR rt is < to zero BGTZL : Compact branch if GPR rt is > to zero BLTC : Compact branch if GPR rs is less than GPR rt BLTUC : Similar to BLTC but unsigned Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 21:05:09 +08:00
/*
* Compact branches for R6 for the
* bgtz and bgtzl opcodes.
* BGTZ | rs = 0 | rt != 0 == BGTZALC
* BGTZ | rs = rt != 0 == BLTZALC
* BGTZ | rs != 0 | rt != 0 == BLTUC
* BGTZL | rs = 0 | rt != 0 == BGTZC
* BGTZL | rs = rt != 0 == BLTZC
* BGTZL | rs != 0 | rt != 0 == BLTC
*
* *ZALC varint for BGTZ &&& rt != 0
* For real GTZ{,L}, rt is always 0.
*/
if (cpu_has_mips_r6 && insn.i_format.rt) {
if ((insn.i_format.opcode == blez_op) &&
((!insn.i_format.rs && insn.i_format.rt) ||
(insn.i_format.rs == insn.i_format.rt)))
regs->regs[31] = epc + 4;
regs->cp0_epc += 8;
break;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* rt field assumed to be zero */
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
if ((long)regs->regs[insn.i_format.rs] > 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
epc = epc + 4 + (insn.i_format.simmediate << 2);
MIPS: Fix branch emulation of branch likely instructions. Two issues: o For beql_op, beql_op, bne_op, bnel_op, blez_op, blezl_op, bgtz_op and bgtzl_op the wrong field was being checked for the instruction opcode. o For blez_op / blezl_op and bgtz_op / bgtzl_op the test was testing for the wrong opcode. This bug got introduced by d8d4e3ae0b5c179c0bfd3f0af5b352d13bea9cfa [MIPS Kprobes: Refactor branch emulation]. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Acked-by: Victor Kamensky <kamensky@cisco.com>
2014-05-23 05:19:00 +08:00
if (insn.i_format.opcode == bgtzl_op)
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
ret = BRANCH_LIKELY_TAKEN;
} else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
epc += 8;
regs->cp0_epc = epc;
break;
MIPS: branch: Remove FP branch handling when CONFIG_MIPS_FP_SUPPORT=n When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so remove the floating point branch support from __compute_return_epc_for_insn() & __mm_isBranchInstr(). This code should never be needed & more importantly relies upon FPU state in struct task_struct which will later be removed. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21017/ Cc: linux-mips@linux-mips.org
2018-11-08 07:14:06 +08:00
#ifdef CONFIG_MIPS_FP_SUPPORT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* And now the FPA/cp1 branch instructions.
*/
MIPS: branch: Remove FP branch handling when CONFIG_MIPS_FP_SUPPORT=n When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so remove the floating point branch support from __compute_return_epc_for_insn() & __mm_isBranchInstr(). This code should never be needed & more importantly relies upon FPU state in struct task_struct which will later be removed. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21017/ Cc: linux-mips@linux-mips.org
2018-11-08 07:14:06 +08:00
case cop1_op: {
unsigned int bit, fcr31, reg;
MIPS: Emulate the BC1{EQ,NE}Z FPU instructions MIPS R6 introduced the following two branch instructions for COP1: BC1EQZ: Branch if Cop1 (FPR) Register Bit 0 is Equal to Zero BC1NEZ: Branch if Cop1 (FPR) Register Bit 0 is Not Equal to Zero Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 18:10:18 +08:00
if (cpu_has_mips_r6 &&
((insn.i_format.rs == bc1eqz_op) ||
(insn.i_format.rs == bc1nez_op))) {
MIPS: Simplify FP context initialization MIPS has up until now had 3 different ways for a task's floating point context to be initialized: - If the task's first use of FP involves it gaining ownership of an FPU then _init_fpu() is used to initialize the FPU's registers such that they all contain ~0, and the FPU registers will be stored to struct thread_info later (eg. when context switching). - If the task first uses FP on a CPU without an associated FPU then fpu_emulator_init_fpu() initializes the task's floating point register state in struct thread_info such that all floating point register contain the bit pattern 0x7ff800007ff80000, different to the _init_fpu() behaviour. - If a task's floating point context is first accessed via ptrace then init_fp_ctx() initializes the floating point register state in struct thread_info to ~0, giving equivalent state to _init_fpu(). The _init_fpu() path has 2 separate implementations - one for r2k/r3k style systems & one for r4k style systems. The _init_fpu() path also requires that we be careful to clear & restore the value of the Config5.FRE bit on modern systems in order to avoid inadvertently triggering floating point exceptions. None of this code is in a performance critical hot path - it runs only the first time a task uses floating point. As such it doesn't seem to warrant the complications of maintaining the _init_fpu() path. Remove _init_fpu() & fpu_emulator_init_fpu(), instead using init_fp_ctx() consistently to initialize floating point register state in struct thread_info. Upon a task's first use of floating point this will typically mean that we initialize state in memory & then load it into FPU registers using _restore_fp() just as we would on a context switch. For other paths such as __compute_return_epc_for_insn() or mipsr2_decoder() this results in a significant simplification of the work to be done. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21002/ Cc: linux-mips@linux-mips.org
2018-11-08 07:13:59 +08:00
if (!init_fp_ctx(current))
lose_fpu(1);
MIPS: Emulate the BC1{EQ,NE}Z FPU instructions MIPS R6 introduced the following two branch instructions for COP1: BC1EQZ: Branch if Cop1 (FPR) Register Bit 0 is Equal to Zero BC1NEZ: Branch if Cop1 (FPR) Register Bit 0 is Not Equal to Zero Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 18:10:18 +08:00
reg = insn.i_format.rt;
MIPS: Fix BC1{EQ,NE}Z return offset calculation The conditions for branching when emulating the BC1EQZ & BC1NEZ instructions were backwards, leading to each of those instructions being treated as the other. Fix this by reversing the conditions, and clear up the code a little for readability & checkpatch. Fixes: c8a34581ec09 ("MIPS: Emulate the BC1{EQ,NE}Z FPU instructions") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13151/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-21 21:04:46 +08:00
bit = get_fpr32(&current->thread.fpu.fpr[reg], 0) & 0x1;
if (insn.i_format.rs == bc1eqz_op)
bit = !bit;
MIPS: Emulate the BC1{EQ,NE}Z FPU instructions MIPS R6 introduced the following two branch instructions for COP1: BC1EQZ: Branch if Cop1 (FPR) Register Bit 0 is Equal to Zero BC1NEZ: Branch if Cop1 (FPR) Register Bit 0 is Not Equal to Zero Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 18:10:18 +08:00
own_fpu(1);
if (bit)
epc = epc + 4 +
(insn.i_format.simmediate << 2);
else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
epc += 8;
regs->cp0_epc = epc;
MIPS: Emulate the BC1{EQ,NE}Z FPU instructions MIPS R6 introduced the following two branch instructions for COP1: BC1EQZ: Branch if Cop1 (FPR) Register Bit 0 is Equal to Zero BC1NEZ: Branch if Cop1 (FPR) Register Bit 0 is Not Equal to Zero Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 18:10:18 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
MIPS: Emulate the BC1{EQ,NE}Z FPU instructions MIPS R6 introduced the following two branch instructions for COP1: BC1EQZ: Branch if Cop1 (FPR) Register Bit 0 is Equal to Zero BC1NEZ: Branch if Cop1 (FPR) Register Bit 0 is Not Equal to Zero Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 18:10:18 +08:00
} else {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
MIPS: Emulate the BC1{EQ,NE}Z FPU instructions MIPS R6 introduced the following two branch instructions for COP1: BC1EQZ: Branch if Cop1 (FPR) Register Bit 0 is Equal to Zero BC1NEZ: Branch if Cop1 (FPR) Register Bit 0 is Not Equal to Zero Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 18:10:18 +08:00
preempt_disable();
if (is_fpu_owner())
fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();
bit = (insn.i_format.rt >> 2);
bit += (bit != 0);
bit += 23;
switch (insn.i_format.rt & 3) {
case 0: /* bc1f */
case 2: /* bc1fl */
if (~fcr31 & (1 << bit)) {
epc = epc + 4 +
(insn.i_format.simmediate << 2);
if (insn.i_format.rt == 2)
ret = BRANCH_LIKELY_TAKEN;
} else
epc += 8;
regs->cp0_epc = epc;
break;
case 1: /* bc1t */
case 3: /* bc1tl */
if (fcr31 & (1 << bit)) {
epc = epc + 4 +
(insn.i_format.simmediate << 2);
if (insn.i_format.rt == 3)
ret = BRANCH_LIKELY_TAKEN;
} else
epc += 8;
regs->cp0_epc = epc;
break;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
}
MIPS: branch: Remove FP branch handling when CONFIG_MIPS_FP_SUPPORT=n When CONFIG_MIPS_FP_SUPPORT=n we don't support floating point, so remove the floating point branch support from __compute_return_epc_for_insn() & __mm_isBranchInstr(). This code should never be needed & more importantly relies upon FPU state in struct task_struct which will later be removed. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21017/ Cc: linux-mips@linux-mips.org
2018-11-08 07:14:06 +08:00
}
#endif /* CONFIG_MIPS_FP_SUPPORT */
MIPS: Compute branch returns for Cavium OCTEON specific branch instructions. For Cavium OCTEON, compute the return epc value for OCTEON specific branch instructions. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-12 07:33:34 +08:00
#ifdef CONFIG_CPU_CAVIUM_OCTEON
case lwc2_op: /* This is bbit0 on Octeon */
if ((regs->regs[insn.i_format.rs] & (1ull<<insn.i_format.rt))
== 0)
epc = epc + 4 + (insn.i_format.simmediate << 2);
else
epc += 8;
regs->cp0_epc = epc;
break;
case ldc2_op: /* This is bbit032 on Octeon */
if ((regs->regs[insn.i_format.rs] &
(1ull<<(insn.i_format.rt+32))) == 0)
epc = epc + 4 + (insn.i_format.simmediate << 2);
else
epc += 8;
regs->cp0_epc = epc;
break;
case swc2_op: /* This is bbit1 on Octeon */
if (regs->regs[insn.i_format.rs] & (1ull<<insn.i_format.rt))
epc = epc + 4 + (insn.i_format.simmediate << 2);
else
epc += 8;
regs->cp0_epc = epc;
break;
case sdc2_op: /* This is bbit132 on Octeon */
if (regs->regs[insn.i_format.rs] &
(1ull<<(insn.i_format.rt+32)))
epc = epc + 4 + (insn.i_format.simmediate << 2);
else
epc += 8;
regs->cp0_epc = epc;
break;
MIPS: Emulate the new MIPS R6 branch compact (BC) instruction MIPS R6 uses the <R6 LWC2 opcode for the new BC instruction. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 21:56:51 +08:00
#else
case bc6_op:
/* Only valid for MIPS R6 */
MIPS: Send SIGILL for R6 branches in `__compute_return_epc_for_insn' Fix: * commit 8467ca0122e2 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction"), * commit 84fef630127a ("MIPS: Emulate the new MIPS R6 BALC instruction"), * commit 69b9a2fd05a3 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions"), * commit 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions"), * commit c893ce38b265 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions") and send SIGILL rather than returning -SIGILL for R6 branch and jump instructions. Returning -SIGILL is never correct as the API defines this function's result upon error to be -EFAULT and a signal actually issued. Fixes: 8467ca0122e2 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction") Fixes: 84fef630127a ("MIPS: Emulate the new MIPS R6 BALC instruction") Fixes: 69b9a2fd05a3 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions") Fixes: 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions") Fixes: c893ce38b265 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions") Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/16399/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:14:12 +08:00
if (!cpu_has_mips_r6)
goto sigill_r6;
MIPS: Emulate the new MIPS R6 branch compact (BC) instruction MIPS R6 uses the <R6 LWC2 opcode for the new BC instruction. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 21:56:51 +08:00
regs->cp0_epc += 8;
break;
MIPS: Emulate the new MIPS R6 BALC instruction MIPS R6 uses the <R6 swc2 opcode for the new BALC instructions. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 23:43:11 +08:00
case balc6_op:
MIPS: Send SIGILL for R6 branches in `__compute_return_epc_for_insn' Fix: * commit 8467ca0122e2 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction"), * commit 84fef630127a ("MIPS: Emulate the new MIPS R6 BALC instruction"), * commit 69b9a2fd05a3 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions"), * commit 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions"), * commit c893ce38b265 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions") and send SIGILL rather than returning -SIGILL for R6 branch and jump instructions. Returning -SIGILL is never correct as the API defines this function's result upon error to be -EFAULT and a signal actually issued. Fixes: 8467ca0122e2 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction") Fixes: 84fef630127a ("MIPS: Emulate the new MIPS R6 BALC instruction") Fixes: 69b9a2fd05a3 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions") Fixes: 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions") Fixes: c893ce38b265 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions") Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/16399/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:14:12 +08:00
if (!cpu_has_mips_r6)
goto sigill_r6;
MIPS: Emulate the new MIPS R6 BALC instruction MIPS R6 uses the <R6 swc2 opcode for the new BALC instructions. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 23:43:11 +08:00
/* Compact branch: BALC */
regs->regs[31] = epc + 4;
epc += 4 + (insn.i_format.simmediate << 2);
regs->cp0_epc = epc;
break;
MIPS: inst.h: Rename b{eq,ne}zcji[al]c_op to pop{6,7}6_op The opcodes currently defined in inst.h as beqzcjic_op & bnezcjialc_op are actually defined in the MIPS base instruction set manuals as pop66 & pop76 respectively. Rename them as such, for consistency with the documentation. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-05 02:35:07 +08:00
case pop66_op:
MIPS: Send SIGILL for R6 branches in `__compute_return_epc_for_insn' Fix: * commit 8467ca0122e2 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction"), * commit 84fef630127a ("MIPS: Emulate the new MIPS R6 BALC instruction"), * commit 69b9a2fd05a3 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions"), * commit 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions"), * commit c893ce38b265 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions") and send SIGILL rather than returning -SIGILL for R6 branch and jump instructions. Returning -SIGILL is never correct as the API defines this function's result upon error to be -EFAULT and a signal actually issued. Fixes: 8467ca0122e2 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction") Fixes: 84fef630127a ("MIPS: Emulate the new MIPS R6 BALC instruction") Fixes: 69b9a2fd05a3 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions") Fixes: 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions") Fixes: c893ce38b265 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions") Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/16399/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:14:12 +08:00
if (!cpu_has_mips_r6)
goto sigill_r6;
MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions MIPS R6 uses the <R6 ldc2 opcode for the new BEQZC and JIC instructions Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-27 17:32:25 +08:00
/* Compact branch: BEQZC || JIC */
regs->cp0_epc += 8;
break;
MIPS: inst.h: Rename b{eq,ne}zcji[al]c_op to pop{6,7}6_op The opcodes currently defined in inst.h as beqzcjic_op & bnezcjialc_op are actually defined in the MIPS base instruction set manuals as pop66 & pop76 respectively. Rename them as such, for consistency with the documentation. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-05 02:35:07 +08:00
case pop76_op:
MIPS: Send SIGILL for R6 branches in `__compute_return_epc_for_insn' Fix: * commit 8467ca0122e2 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction"), * commit 84fef630127a ("MIPS: Emulate the new MIPS R6 BALC instruction"), * commit 69b9a2fd05a3 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions"), * commit 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions"), * commit c893ce38b265 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions") and send SIGILL rather than returning -SIGILL for R6 branch and jump instructions. Returning -SIGILL is never correct as the API defines this function's result upon error to be -EFAULT and a signal actually issued. Fixes: 8467ca0122e2 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction") Fixes: 84fef630127a ("MIPS: Emulate the new MIPS R6 BALC instruction") Fixes: 69b9a2fd05a3 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions") Fixes: 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions") Fixes: c893ce38b265 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions") Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/16399/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:14:12 +08:00
if (!cpu_has_mips_r6)
goto sigill_r6;
MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions MIPS R6 uses the <R6 sdc2 opcode for the new BNEZC and JIALC instructions Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-01-08 19:55:20 +08:00
/* Compact branch: BNEZC || JIALC */
MIPS: Fix bnezc/jialc return address calculation The code handling the pop76 opcode (ie. bnezc & jialc instructions) in __compute_return_epc_for_insn() needs to set the value of $31 in the jialc case, which is encoded with rs = 0. However its check to differentiate bnezc (rs != 0) from jialc (rs = 0) was unfortunately backwards, meaning that if we emulate a bnezc instruction we clobber $31 & if we emulate a jialc instruction it actually behaves like a jic instruction. Fix this by inverting the check of rs to match the way the instructions are actually encoded. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions") Cc: stable <stable@vger.kernel.org> # v4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16178/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-03 02:35:01 +08:00
if (!insn.i_format.rs) {
/* JIALC: set $31/ra */
MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions MIPS R6 uses the <R6 sdc2 opcode for the new BNEZC and JIALC instructions Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-01-08 19:55:20 +08:00
regs->regs[31] = epc + 4;
MIPS: Fix bnezc/jialc return address calculation The code handling the pop76 opcode (ie. bnezc & jialc instructions) in __compute_return_epc_for_insn() needs to set the value of $31 in the jialc case, which is encoded with rs = 0. However its check to differentiate bnezc (rs != 0) from jialc (rs = 0) was unfortunately backwards, meaning that if we emulate a bnezc instruction we clobber $31 & if we emulate a jialc instruction it actually behaves like a jic instruction. Fix this by inverting the check of rs to match the way the instructions are actually encoded. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions") Cc: stable <stable@vger.kernel.org> # v4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16178/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-03 02:35:01 +08:00
}
MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions MIPS R6 uses the <R6 sdc2 opcode for the new BNEZC and JIALC instructions Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-01-08 19:55:20 +08:00
regs->cp0_epc += 8;
break;
MIPS: Compute branch returns for Cavium OCTEON specific branch instructions. For Cavium OCTEON, compute the return epc value for OCTEON specific branch instructions. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-12 07:33:34 +08:00
#endif
MIPS: inst.h: Rename cbcond{0,1}_op to pop{1,3}0_op The opcodes currently defined in inst.h as cbcond0_op & cbcond1_op are actually defined in the MIPS base instruction set manuals as pop10 & pop30 respectively. Rename them as such, for consistency with the documentation. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-05 02:35:08 +08:00
case pop10_op:
case pop30_op:
MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions MIPS R6 uses the <R6 ADDI opcode for the new BOVC, BEQC and BEQZALC instructions. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 22:08:52 +08:00
/* Only valid for MIPS R6 */
MIPS: Send SIGILL for R6 branches in `__compute_return_epc_for_insn' Fix: * commit 8467ca0122e2 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction"), * commit 84fef630127a ("MIPS: Emulate the new MIPS R6 BALC instruction"), * commit 69b9a2fd05a3 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions"), * commit 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions"), * commit c893ce38b265 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions") and send SIGILL rather than returning -SIGILL for R6 branch and jump instructions. Returning -SIGILL is never correct as the API defines this function's result upon error to be -EFAULT and a signal actually issued. Fixes: 8467ca0122e2 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction") Fixes: 84fef630127a ("MIPS: Emulate the new MIPS R6 BALC instruction") Fixes: 69b9a2fd05a3 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions") Fixes: 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions") Fixes: c893ce38b265 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions") Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/16399/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:14:12 +08:00
if (!cpu_has_mips_r6)
goto sigill_r6;
MIPS: Emulate the new MIPS R6 BNVC, BNEC and BNEZLAC instructions MIPS R6 uses the <R6 DADDI opcode for the new BNVC, BNEC and BNEZLAC instructions. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 23:03:54 +08:00
/*
* Compact branches:
* bovc, beqc, beqzalc, bnvc, bnec, bnezlac
*/
MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions MIPS R6 uses the <R6 ADDI opcode for the new BOVC, BEQC and BEQZALC instructions. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-26 22:08:52 +08:00
if (insn.i_format.rt && !insn.i_format.rs)
regs->regs[31] = epc + 4;
regs->cp0_epc += 8;
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
return ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6 The MIPS R6 JR instruction is an alias to the JALR one, so it may need emulation for non-R6 userlands. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-25 23:54:14 +08:00
sigill_dsp:
MIPS: Use `pr_debug' for messages from `__compute_return_epc_for_insn' Reduce the log level for branch emulation error messages issued before sending SIGILL by `__compute_return_epc_for_insn' as these are triggered by user software and are not an event that would normally require any attention. The same signal sent from elsewhere does not actually leave any trace in the kernel log at all. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16402/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:18:11 +08:00
pr_debug("%s: DSP branch but not DSP ASE - sending SIGILL.\n",
current->comm);
signal: Remove task parameter from force_sig All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-23 23:17:27 +08:00
force_sig(SIGILL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EFAULT;
MIPS: Rename `sigill_r6' to `sigill_r2r6' in `__compute_return_epc_for_insn' Use the more accurate `sigill_r2r6' name for the label used in the case of sending SIGILL in the absence of the instruction emulator for an earlier ISA level instruction that has been removed as from the R6 ISA, so that the `sigill_r6' name is freed for the situation where an R6 instruction is not supposed to be interpreted, because the executing processor does not support the R6 ISA. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/16397/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:09:23 +08:00
sigill_r2r6:
MIPS: Use `pr_debug' for messages from `__compute_return_epc_for_insn' Reduce the log level for branch emulation error messages issued before sending SIGILL by `__compute_return_epc_for_insn' as these are triggered by user software and are not an event that would normally require any attention. The same signal sent from elsewhere does not actually leave any trace in the kernel log at all. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16402/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:18:11 +08:00
pr_debug("%s: R2 branch but r2-to-r6 emulator is not present - sending SIGILL.\n",
current->comm);
signal: Remove task parameter from force_sig All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-23 23:17:27 +08:00
force_sig(SIGILL);
MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6 The MIPS R6 JR instruction is an alias to the JALR one, so it may need emulation for non-R6 userlands. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-25 23:54:14 +08:00
return -EFAULT;
MIPS: Send SIGILL for R6 branches in `__compute_return_epc_for_insn' Fix: * commit 8467ca0122e2 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction"), * commit 84fef630127a ("MIPS: Emulate the new MIPS R6 BALC instruction"), * commit 69b9a2fd05a3 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions"), * commit 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions"), * commit c893ce38b265 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions") and send SIGILL rather than returning -SIGILL for R6 branch and jump instructions. Returning -SIGILL is never correct as the API defines this function's result upon error to be -EFAULT and a signal actually issued. Fixes: 8467ca0122e2 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction") Fixes: 84fef630127a ("MIPS: Emulate the new MIPS R6 BALC instruction") Fixes: 69b9a2fd05a3 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions") Fixes: 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions") Fixes: c893ce38b265 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions") Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/16399/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:14:12 +08:00
sigill_r6:
MIPS: Use `pr_debug' for messages from `__compute_return_epc_for_insn' Reduce the log level for branch emulation error messages issued before sending SIGILL by `__compute_return_epc_for_insn' as these are triggered by user software and are not an event that would normally require any attention. The same signal sent from elsewhere does not actually leave any trace in the kernel log at all. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16402/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:18:11 +08:00
pr_debug("%s: R6 branch but no MIPSr6 ISA support - sending SIGILL.\n",
current->comm);
signal: Remove task parameter from force_sig All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-23 23:17:27 +08:00
force_sig(SIGILL);
MIPS: Send SIGILL for R6 branches in `__compute_return_epc_for_insn' Fix: * commit 8467ca0122e2 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction"), * commit 84fef630127a ("MIPS: Emulate the new MIPS R6 BALC instruction"), * commit 69b9a2fd05a3 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions"), * commit 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions"), * commit c893ce38b265 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions") and send SIGILL rather than returning -SIGILL for R6 branch and jump instructions. Returning -SIGILL is never correct as the API defines this function's result upon error to be -EFAULT and a signal actually issued. Fixes: 8467ca0122e2 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction") Fixes: 84fef630127a ("MIPS: Emulate the new MIPS R6 BALC instruction") Fixes: 69b9a2fd05a3 ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions") Fixes: 28d6f93d201d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions") Fixes: c893ce38b265 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions") Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.19+ Patchwork: https://patchwork.linux-mips.org/patch/16399/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-16 07:14:12 +08:00
return -EFAULT;
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
}
EXPORT_SYMBOL_GPL(__compute_return_epc_for_insn);
Support the MIPS32 / MIPS64 DSP ASE. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-05-31 19:49:19 +08:00
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
int __compute_return_epc(struct pt_regs *regs)
{
unsigned int __user *addr;
long epc;
union mips_instruction insn;
epc = regs->cp0_epc;
if (epc & 3)
goto unaligned;
/*
* Read the instruction
*/
addr = (unsigned int __user *) epc;
if (__get_user(insn.word, addr)) {
signal: Remove task parameter from force_sig All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-23 23:17:27 +08:00
force_sig(SIGSEGV);
MIPS Kprobes: Refactor branch emulation This patch refactors MIPS branch emulation code so as to allow skipping delay slot instruction in case of branch likely instructions when branch is not taken. This is useful for keeping the code common for use cases like kprobes where one would like to handle the branch instructions keeping the delay slot instuction also in picture for branch likely instructions. Also allow emulation when instruction to be decoded is not at pt_regs->cp0_epc as in case of kprobes where pt_regs->cp0_epc points to the breakpoint instruction. The patch also exports the function for modules. Signed-off-by: Maneesh Soni <manesoni@cisco.com> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: David Daney <david.daney@cavium.com> Cc: ananth@in.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 19:37:11 +08:00
return -EFAULT;
}
return __compute_return_epc_for_insn(regs, insn);
unaligned:
printk("%s: unaligned epc - sending SIGBUS.\n", current->comm);
signal: Remove task parameter from force_sig All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-23 23:17:27 +08:00
force_sig(SIGBUS);
Support the MIPS32 / MIPS64 DSP ASE. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-05-31 19:49:19 +08:00
return -EFAULT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
MIPS: tracing: disable uprobe/kprobe on compact branch instructions Current instruction decoder for uprobe/kprobe handler only handles branches with delay slots. For compact branches the behaviour is rather unpredictable - and depending on the encoding of a compact branch instruction may result in one (or more) of: - executing an instruction that follows a branch which wasn't in a delay slot and shouldn't have been executed - incorrectly emulating a branch leading to a jump to a wrong location - unexpected branching out of the single-stepped code and never reaching the breakpoint that should terminate the probe handler Results of these actions are generally unpredictable, but can end up with a probed application or kernel crash, so disable placing probes on compact branches until they are handled properly. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14336/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-30 17:33:46 +08:00
#if (defined CONFIG_KPROBES) || (defined CONFIG_UPROBES)
int __insn_is_compact_branch(union mips_instruction insn)
{
if (!cpu_has_mips_r6)
return 0;
switch (insn.i_format.opcode) {
case blezl_op:
case bgtzl_op:
case blez_op:
case bgtz_op:
/*
* blez[l] and bgtz[l] opcodes with non-zero rt
* are MIPS R6 compact branches
*/
if (insn.i_format.rt)
return 1;
break;
case bc6_op:
case balc6_op:
case pop10_op:
case pop30_op:
case pop66_op:
case pop76_op:
return 1;
}
return 0;
}
EXPORT_SYMBOL_GPL(__insn_is_compact_branch);
#endif /* CONFIG_KPROBES || CONFIG_UPROBES */