linux/drivers/platform/x86/fujitsu-laptop.c

1035 lines
28 KiB
C
Raw Normal View History

/*-*-linux-c-*-*/
/*
Copyright (C) 2007,2008 Jonathan Woithe <jwoithe@just42.net>
Copyright (C) 2008 Peter Gruber <nokos@gmx.net>
Copyright (C) 2008 Tony Vroon <tony@linx.net>
Based on earlier work:
Copyright (C) 2003 Shane Spencer <shane@bogomip.com>
Adrian Yee <brewt-fujitsu@brewt.org>
Templated from msi-laptop.c and thinkpad_acpi.c which is copyright
by its respective authors.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA.
*/
/*
* fujitsu-laptop.c - Fujitsu laptop support, providing access to additional
* features made available on a range of Fujitsu laptops including the
* P2xxx/P5xxx/S6xxx/S7xxx series.
*
* This driver implements a vendor-specific backlight control interface for
* Fujitsu laptops and provides support for hotkeys present on certain Fujitsu
* laptops.
*
* This driver has been tested on a Fujitsu Lifebook S6410, S7020 and
* P8010. It should work on most P-series and S-series Lifebooks, but
* YMMV.
*
* The module parameter use_alt_lcd_levels switches between different ACPI
* brightness controls which are used by different Fujitsu laptops. In most
* cases the correct method is automatically detected. "use_alt_lcd_levels=1"
* is applicable for a Fujitsu Lifebook S6410 if autodetection fails.
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/bitops.h>
#include <linux/dmi.h>
#include <linux/backlight.h>
#include <linux/fb.h>
#include <linux/input.h>
#include <linux/input/sparse-keymap.h>
#include <linux/kfifo.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <acpi/video.h>
#define FUJITSU_DRIVER_VERSION "0.6.0"
#define FUJITSU_LCD_N_LEVELS 8
#define ACPI_FUJITSU_CLASS "fujitsu"
#define ACPI_FUJITSU_BL_HID "FUJ02B1"
#define ACPI_FUJITSU_BL_DRIVER_NAME "Fujitsu laptop FUJ02B1 ACPI brightness driver"
#define ACPI_FUJITSU_BL_DEVICE_NAME "Fujitsu FUJ02B1"
#define ACPI_FUJITSU_LAPTOP_HID "FUJ02E3"
#define ACPI_FUJITSU_LAPTOP_DRIVER_NAME "Fujitsu laptop FUJ02E3 ACPI hotkeys driver"
#define ACPI_FUJITSU_LAPTOP_DEVICE_NAME "Fujitsu FUJ02E3"
#define ACPI_FUJITSU_NOTIFY_CODE 0x80
/* FUNC interface - command values */
#define FUNC_FLAGS BIT(12)
#define FUNC_LEDS (BIT(12) | BIT(0))
#define FUNC_BUTTONS (BIT(12) | BIT(1))
#define FUNC_BACKLIGHT (BIT(12) | BIT(2))
/* FUNC interface - responses */
#define UNSUPPORTED_CMD BIT(31)
/* FUNC interface - status flags */
#define FLAG_RFKILL BIT(5)
#define FLAG_LID BIT(8)
#define FLAG_DOCK BIT(9)
/* FUNC interface - LED control */
#define FUNC_LED_OFF BIT(0)
#define FUNC_LED_ON (BIT(0) | BIT(16) | BIT(17))
#define LOGOLAMP_POWERON BIT(13)
#define LOGOLAMP_ALWAYS BIT(14)
#define KEYBOARD_LAMPS BIT(8)
#define RADIO_LED_ON BIT(5)
#define ECO_LED BIT(16)
#define ECO_LED_ON BIT(19)
/* FUNC interface - backlight power control */
#define BACKLIGHT_PARAM_POWER BIT(2)
#define BACKLIGHT_OFF (BIT(0) | BIT(1))
#define BACKLIGHT_ON 0
/* Scancodes read from the GIRB register */
#define KEY1_CODE 0x410
#define KEY2_CODE 0x411
#define KEY3_CODE 0x412
#define KEY4_CODE 0x413
#define KEY5_CODE 0x420
/* Hotkey ringbuffer limits */
#define MAX_HOTKEY_RINGBUFFER_SIZE 100
#define RINGBUFFERSIZE 40
/* Module parameters */
static int use_alt_lcd_levels = -1;
static bool disable_brightness_adjust;
/* Device controlling the backlight and associated keys */
struct fujitsu_bl {
struct input_dev *input;
char phys[32];
struct backlight_device *bl_device;
unsigned int max_brightness;
unsigned int brightness_level;
};
static struct fujitsu_bl *fujitsu_bl;
/* Device used to access hotkeys and other features on the laptop */
struct fujitsu_laptop {
struct input_dev *input;
char phys[32];
struct platform_device *pf_device;
kfifo: move struct kfifo in place This is a new generic kernel FIFO implementation. The current kernel fifo API is not very widely used, because it has to many constrains. Only 17 files in the current 2.6.31-rc5 used it. FIFO's are like list's a very basic thing and a kfifo API which handles the most use case would save a lot of development time and memory resources. I think this are the reasons why kfifo is not in use: - The API is to simple, important functions are missing - A fifo can be only allocated dynamically - There is a requirement of a spinlock whether you need it or not - There is no support for data records inside a fifo So I decided to extend the kfifo in a more generic way without blowing up the API to much. The new API has the following benefits: - Generic usage: For kernel internal use and/or device driver. - Provide an API for the most use case. - Slim API: The whole API provides 25 functions. - Linux style habit. - DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros - Direct copy_to_user from the fifo and copy_from_user into the fifo. - The kfifo itself is an in place member of the using data structure, this save an indirection access and does not waste the kernel allocator. - Lockless access: if only one reader and one writer is active on the fifo, which is the common use case, no additional locking is necessary. - Remove spinlock - give the user the freedom of choice what kind of locking to use if one is required. - Ability to handle records. Three type of records are supported: - Variable length records between 0-255 bytes, with a record size field of 1 bytes. - Variable length records between 0-65535 bytes, with a record size field of 2 bytes. - Fixed size records, which no record size field. - Preserve memory resource. - Performance! - Easy to use! This patch: Since most users want to have the kfifo as part of another object, reorganize the code to allow including struct kfifo in another data structure. This requires changing the kfifo_alloc and kfifo_init prototypes so that we pass an existing kfifo pointer into them. This patch changes the implementation and all existing users. [akpm@linux-foundation.org: fix warning] Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22 06:37:26 +08:00
struct kfifo fifo;
spinlock_t fifo_lock;
int flags_supported;
int flags_state;
};
platform/x86: fujitsu-laptop: track the last instantiated FUJ02E3 ACPI device fujitsu-laptop registers two ACPI drivers: one for ACPI device FUJ02B1 enabling backlight control and another for ACPI device FUJ02E3 which handles various other stuff (hotkeys, LEDs, etc.) In a perfect world, private data used by each of these drivers would be neatly encapsulated in a structure specific to a given driver instance. Sadly, firmware present on some Fujitsu laptops makes that impossible by exposing backlight power control (which is what the FUJ02B1 ACPI device should take care of) through the FUJ02E3 ACPI device. This means the backlight driver needs a way to access an ACPI device it is not bound to. When the backlight driver is extracted into a separate module, it will not be able to rely on a module-wide variable any more and such access will happen through an API exposed by fujitsu-laptop. For all known firmwares out in the wild, it seems that whenever the FUJ02B1 ACPI device is present, it is always accompanied by a single instance of the FUJ02E3 ACPI device. We could independently grab an ACPI handle to the FUJ02E3 ACPI device from the backlight driver, but that would require using a hardcoded absolute path to that ACPI device, which is subject to change. It is easier to simply store a module-wide pointer to the last (most likely only) FUJ02E3 ACPI device found, make the aforementioned API use it and cover our bases by warning the user if firmware exposes multiple FUJ02E3 ACPI devices. Introducing this pointer in advance allows us to get rid of the acpi_handle field of struct fujitsu_bl and also enables a bit more step-by-step migration to a device-specific implementation of call_fext_func(). Signed-off-by: Michał Kępień <kernel@kempniu.pl> Reviewed-by: Jonathan Woithe <jwoithe@just42.net> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-05-19 15:44:45 +08:00
static struct acpi_device *fext;
/* Fujitsu ACPI interface function */
static int call_fext_func(struct acpi_device *device,
int func, int op, int feature, int state)
{
union acpi_object params[4] = {
{ .integer.type = ACPI_TYPE_INTEGER, .integer.value = func },
{ .integer.type = ACPI_TYPE_INTEGER, .integer.value = op },
{ .integer.type = ACPI_TYPE_INTEGER, .integer.value = feature },
{ .integer.type = ACPI_TYPE_INTEGER, .integer.value = state }
};
struct acpi_object_list arg_list = { 4, params };
unsigned long long value;
acpi_status status;
status = acpi_evaluate_integer(device->handle, "FUNC", &arg_list,
&value);
if (ACPI_FAILURE(status)) {
acpi_handle_err(device->handle, "Failed to evaluate FUNC\n");
return -ENODEV;
}
acpi_handle_debug(device->handle,
"FUNC 0x%x (args 0x%x, 0x%x, 0x%x) returned 0x%x\n",
func, op, feature, state, (int)value);
return value;
}
/* Hardware access for LCD brightness control */
static int set_lcd_level(struct acpi_device *device, int level)
{
struct fujitsu_bl *priv = acpi_driver_data(device);
acpi_status status;
char *method;
switch (use_alt_lcd_levels) {
case -1:
if (acpi_has_method(device->handle, "SBL2"))
method = "SBL2";
else
method = "SBLL";
break;
case 1:
method = "SBL2";
break;
default:
method = "SBLL";
break;
}
acpi_handle_debug(device->handle, "set lcd level via %s [%d]\n", method,
level);
if (level < 0 || level >= priv->max_brightness)
return -EINVAL;
status = acpi_execute_simple_method(device->handle, method, level);
if (ACPI_FAILURE(status)) {
acpi_handle_err(device->handle, "Failed to evaluate %s\n",
method);
return -ENODEV;
}
priv->brightness_level = level;
return 0;
}
static int get_lcd_level(struct acpi_device *device)
{
struct fujitsu_bl *priv = acpi_driver_data(device);
unsigned long long state = 0;
acpi_status status = AE_OK;
acpi_handle_debug(device->handle, "get lcd level via GBLL\n");
status = acpi_evaluate_integer(device->handle, "GBLL", NULL, &state);
if (ACPI_FAILURE(status))
return 0;
priv->brightness_level = state & 0x0fffffff;
return priv->brightness_level;
}
static int get_max_brightness(struct acpi_device *device)
{
struct fujitsu_bl *priv = acpi_driver_data(device);
unsigned long long state = 0;
acpi_status status = AE_OK;
acpi_handle_debug(device->handle, "get max lcd level via RBLL\n");
status = acpi_evaluate_integer(device->handle, "RBLL", NULL, &state);
if (ACPI_FAILURE(status))
return -1;
priv->max_brightness = state;
return priv->max_brightness;
}
/* Backlight device stuff */
static int bl_get_brightness(struct backlight_device *b)
{
struct acpi_device *device = bl_get_data(b);
return b->props.power == FB_BLANK_POWERDOWN ? 0 : get_lcd_level(device);
}
static int bl_update_status(struct backlight_device *b)
{
struct acpi_device *device = bl_get_data(b);
if (fext) {
if (b->props.power == FB_BLANK_POWERDOWN)
call_fext_func(fext, FUNC_BACKLIGHT, 0x1,
BACKLIGHT_PARAM_POWER, BACKLIGHT_OFF);
else
call_fext_func(fext, FUNC_BACKLIGHT, 0x1,
BACKLIGHT_PARAM_POWER, BACKLIGHT_ON);
}
return set_lcd_level(device, b->props.brightness);
}
static const struct backlight_ops fujitsu_bl_ops = {
.get_brightness = bl_get_brightness,
.update_status = bl_update_status,
};
static ssize_t lid_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct fujitsu_laptop *priv = dev_get_drvdata(dev);
if (!(priv->flags_supported & FLAG_LID))
return sprintf(buf, "unknown\n");
if (priv->flags_state & FLAG_LID)
return sprintf(buf, "open\n");
else
return sprintf(buf, "closed\n");
}
static ssize_t dock_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct fujitsu_laptop *priv = dev_get_drvdata(dev);
if (!(priv->flags_supported & FLAG_DOCK))
return sprintf(buf, "unknown\n");
if (priv->flags_state & FLAG_DOCK)
return sprintf(buf, "docked\n");
else
return sprintf(buf, "undocked\n");
}
static ssize_t radios_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct fujitsu_laptop *priv = dev_get_drvdata(dev);
if (!(priv->flags_supported & FLAG_RFKILL))
return sprintf(buf, "unknown\n");
if (priv->flags_state & FLAG_RFKILL)
return sprintf(buf, "on\n");
else
return sprintf(buf, "killed\n");
}
static DEVICE_ATTR_RO(lid);
static DEVICE_ATTR_RO(dock);
static DEVICE_ATTR_RO(radios);
static struct attribute *fujitsu_pf_attributes[] = {
&dev_attr_lid.attr,
&dev_attr_dock.attr,
&dev_attr_radios.attr,
NULL
};
static const struct attribute_group fujitsu_pf_attribute_group = {
.attrs = fujitsu_pf_attributes
};
static struct platform_driver fujitsu_pf_driver = {
.driver = {
.name = "fujitsu-laptop",
}
};
/* ACPI device for LCD brightness control */
static const struct key_entry keymap_backlight[] = {
{ KE_KEY, true, { KEY_BRIGHTNESSUP } },
{ KE_KEY, false, { KEY_BRIGHTNESSDOWN } },
{ KE_END, 0 }
};
static int acpi_fujitsu_bl_input_setup(struct acpi_device *device)
{
struct fujitsu_bl *priv = acpi_driver_data(device);
int ret;
priv->input = devm_input_allocate_device(&device->dev);
if (!priv->input)
return -ENOMEM;
snprintf(priv->phys, sizeof(priv->phys), "%s/video/input0",
acpi_device_hid(device));
priv->input->name = acpi_device_name(device);
priv->input->phys = priv->phys;
priv->input->id.bustype = BUS_HOST;
priv->input->id.product = 0x06;
ret = sparse_keymap_setup(priv->input, keymap_backlight, NULL);
if (ret)
return ret;
return input_register_device(priv->input);
}
static int fujitsu_backlight_register(struct acpi_device *device)
{
struct fujitsu_bl *priv = acpi_driver_data(device);
const struct backlight_properties props = {
.brightness = priv->brightness_level,
.max_brightness = priv->max_brightness - 1,
.type = BACKLIGHT_PLATFORM
};
struct backlight_device *bd;
bd = devm_backlight_device_register(&device->dev, "fujitsu-laptop",
&device->dev, device,
&fujitsu_bl_ops, &props);
if (IS_ERR(bd))
return PTR_ERR(bd);
priv->bl_device = bd;
return 0;
}
static int acpi_fujitsu_bl_add(struct acpi_device *device)
{
struct fujitsu_bl *priv;
int ret;
if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
return -ENODEV;
priv = devm_kzalloc(&device->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
fujitsu_bl = priv;
strcpy(acpi_device_name(device), ACPI_FUJITSU_BL_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_FUJITSU_CLASS);
device->driver_data = priv;
pr_info("ACPI: %s [%s]\n",
acpi_device_name(device), acpi_device_bid(device));
if (get_max_brightness(device) <= 0)
priv->max_brightness = FUJITSU_LCD_N_LEVELS;
get_lcd_level(device);
ret = acpi_fujitsu_bl_input_setup(device);
if (ret)
return ret;
return fujitsu_backlight_register(device);
}
/* Brightness notify */
static void acpi_fujitsu_bl_notify(struct acpi_device *device, u32 event)
{
struct fujitsu_bl *priv = acpi_driver_data(device);
int oldb, newb;
if (event != ACPI_FUJITSU_NOTIFY_CODE) {
acpi_handle_info(device->handle, "unsupported event [0x%x]\n",
event);
sparse_keymap_report_event(priv->input, -1, 1, true);
return;
}
oldb = priv->brightness_level;
get_lcd_level(device);
newb = priv->brightness_level;
acpi_handle_debug(device->handle,
"brightness button event [%i -> %i]\n", oldb, newb);
if (oldb == newb)
return;
if (!disable_brightness_adjust)
set_lcd_level(device, newb);
sparse_keymap_report_event(priv->input, oldb < newb, 1, true);
}
/* ACPI device for hotkey handling */
static const struct key_entry keymap_default[] = {
{ KE_KEY, KEY1_CODE, { KEY_PROG1 } },
{ KE_KEY, KEY2_CODE, { KEY_PROG2 } },
{ KE_KEY, KEY3_CODE, { KEY_PROG3 } },
{ KE_KEY, KEY4_CODE, { KEY_PROG4 } },
{ KE_KEY, KEY5_CODE, { KEY_RFKILL } },
{ KE_KEY, BIT(26), { KEY_TOUCHPAD_TOGGLE } },
{ KE_END, 0 }
};
static const struct key_entry keymap_s64x0[] = {
{ KE_KEY, KEY1_CODE, { KEY_SCREENLOCK } }, /* "Lock" */
{ KE_KEY, KEY2_CODE, { KEY_HELP } }, /* "Mobility Center */
{ KE_KEY, KEY3_CODE, { KEY_PROG3 } },
{ KE_KEY, KEY4_CODE, { KEY_PROG4 } },
{ KE_END, 0 }
};
static const struct key_entry keymap_p8010[] = {
{ KE_KEY, KEY1_CODE, { KEY_HELP } }, /* "Support" */
{ KE_KEY, KEY2_CODE, { KEY_PROG2 } },
{ KE_KEY, KEY3_CODE, { KEY_SWITCHVIDEOMODE } }, /* "Presentation" */
{ KE_KEY, KEY4_CODE, { KEY_WWW } }, /* "WWW" */
{ KE_END, 0 }
};
static const struct key_entry *keymap = keymap_default;
static int fujitsu_laptop_dmi_keymap_override(const struct dmi_system_id *id)
{
pr_info("Identified laptop model '%s'\n", id->ident);
keymap = id->driver_data;
return 1;
}
static const struct dmi_system_id fujitsu_laptop_dmi_table[] = {
{
.callback = fujitsu_laptop_dmi_keymap_override,
.ident = "Fujitsu Siemens S6410",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6410"),
},
.driver_data = (void *)keymap_s64x0
},
{
.callback = fujitsu_laptop_dmi_keymap_override,
.ident = "Fujitsu Siemens S6420",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6420"),
},
.driver_data = (void *)keymap_s64x0
},
{
.callback = fujitsu_laptop_dmi_keymap_override,
.ident = "Fujitsu LifeBook P8010",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P8010"),
},
.driver_data = (void *)keymap_p8010
},
{}
};
static int acpi_fujitsu_laptop_input_setup(struct acpi_device *device)
{
struct fujitsu_laptop *priv = acpi_driver_data(device);
int ret;
priv->input = devm_input_allocate_device(&device->dev);
if (!priv->input)
return -ENOMEM;
snprintf(priv->phys, sizeof(priv->phys), "%s/input0",
acpi_device_hid(device));
priv->input->name = acpi_device_name(device);
priv->input->phys = priv->phys;
priv->input->id.bustype = BUS_HOST;
dmi_check_system(fujitsu_laptop_dmi_table);
ret = sparse_keymap_setup(priv->input, keymap, NULL);
if (ret)
return ret;
return input_register_device(priv->input);
}
static int fujitsu_laptop_platform_add(struct acpi_device *device)
{
struct fujitsu_laptop *priv = acpi_driver_data(device);
int ret;
priv->pf_device = platform_device_alloc("fujitsu-laptop", -1);
if (!priv->pf_device)
return -ENOMEM;
platform_set_drvdata(priv->pf_device, priv);
ret = platform_device_add(priv->pf_device);
if (ret)
goto err_put_platform_device;
ret = sysfs_create_group(&priv->pf_device->dev.kobj,
&fujitsu_pf_attribute_group);
if (ret)
goto err_del_platform_device;
return 0;
err_del_platform_device:
platform_device_del(priv->pf_device);
err_put_platform_device:
platform_device_put(priv->pf_device);
return ret;
}
static void fujitsu_laptop_platform_remove(struct acpi_device *device)
{
struct fujitsu_laptop *priv = acpi_driver_data(device);
sysfs_remove_group(&priv->pf_device->dev.kobj,
&fujitsu_pf_attribute_group);
platform_device_unregister(priv->pf_device);
}
static int logolamp_set(struct led_classdev *cdev,
enum led_brightness brightness)
{
struct acpi_device *device = to_acpi_device(cdev->dev->parent);
int poweron = FUNC_LED_ON, always = FUNC_LED_ON;
int ret;
if (brightness < LED_HALF)
poweron = FUNC_LED_OFF;
if (brightness < LED_FULL)
always = FUNC_LED_OFF;
ret = call_fext_func(device, FUNC_LEDS, 0x1, LOGOLAMP_POWERON, poweron);
if (ret < 0)
return ret;
return call_fext_func(device, FUNC_LEDS, 0x1, LOGOLAMP_ALWAYS, always);
}
static enum led_brightness logolamp_get(struct led_classdev *cdev)
{
struct acpi_device *device = to_acpi_device(cdev->dev->parent);
int ret;
ret = call_fext_func(device, FUNC_LEDS, 0x2, LOGOLAMP_ALWAYS, 0x0);
if (ret == FUNC_LED_ON)
return LED_FULL;
ret = call_fext_func(device, FUNC_LEDS, 0x2, LOGOLAMP_POWERON, 0x0);
if (ret == FUNC_LED_ON)
return LED_HALF;
return LED_OFF;
}
static int kblamps_set(struct led_classdev *cdev,
enum led_brightness brightness)
{
struct acpi_device *device = to_acpi_device(cdev->dev->parent);
if (brightness >= LED_FULL)
return call_fext_func(device, FUNC_LEDS, 0x1, KEYBOARD_LAMPS,
FUNC_LED_ON);
else
return call_fext_func(device, FUNC_LEDS, 0x1, KEYBOARD_LAMPS,
FUNC_LED_OFF);
}
static enum led_brightness kblamps_get(struct led_classdev *cdev)
{
struct acpi_device *device = to_acpi_device(cdev->dev->parent);
enum led_brightness brightness = LED_OFF;
if (call_fext_func(device,
FUNC_LEDS, 0x2, KEYBOARD_LAMPS, 0x0) == FUNC_LED_ON)
brightness = LED_FULL;
return brightness;
}
static int radio_led_set(struct led_classdev *cdev,
enum led_brightness brightness)
{
struct acpi_device *device = to_acpi_device(cdev->dev->parent);
if (brightness >= LED_FULL)
return call_fext_func(device, FUNC_FLAGS, 0x5, RADIO_LED_ON,
RADIO_LED_ON);
else
return call_fext_func(device, FUNC_FLAGS, 0x5, RADIO_LED_ON,
0x0);
}
static enum led_brightness radio_led_get(struct led_classdev *cdev)
{
struct acpi_device *device = to_acpi_device(cdev->dev->parent);
enum led_brightness brightness = LED_OFF;
if (call_fext_func(device, FUNC_FLAGS, 0x4, 0x0, 0x0) & RADIO_LED_ON)
brightness = LED_FULL;
return brightness;
}
static int eco_led_set(struct led_classdev *cdev,
enum led_brightness brightness)
{
struct acpi_device *device = to_acpi_device(cdev->dev->parent);
int curr;
curr = call_fext_func(device, FUNC_LEDS, 0x2, ECO_LED, 0x0);
if (brightness >= LED_FULL)
return call_fext_func(device, FUNC_LEDS, 0x1, ECO_LED,
curr | ECO_LED_ON);
else
return call_fext_func(device, FUNC_LEDS, 0x1, ECO_LED,
curr & ~ECO_LED_ON);
}
static enum led_brightness eco_led_get(struct led_classdev *cdev)
{
struct acpi_device *device = to_acpi_device(cdev->dev->parent);
enum led_brightness brightness = LED_OFF;
if (call_fext_func(device, FUNC_LEDS, 0x2, ECO_LED, 0x0) & ECO_LED_ON)
brightness = LED_FULL;
return brightness;
}
platform/x86: fujitsu-laptop: switch to managed LED class devices Use devm_led_classdev_register() for registering LED class devices in order to simplify cleanup and remove LED-related fields with the "_registered" suffix from struct fujitsu_laptop. This also fixes a cleanup bug: with non-managed LED class devices, if e.g. two supported LEDs are detected, the first one gets registered successfully but the second one does not, acpi_fujitsu_laptop_add() will return an error, but the successfully registered LED will never get unregistered. Change the parent device for LED class devices to the FUJ02E3 ACPI device due to this being the logically correct relationship as LED class devices do not depend on any facility provided by the platform device registered by fujitsu-laptop, which was their parent until now. Each managed LED class device is automatically unregistered when the last reference to its parent device is dropped. Taking the parent change described above into account, LED class devices registered by fujitsu-laptop will be unregistered after acpi_fujitsu_laptop_remove() is called. During unregistration, LED brightness is reset to LED_OFF by LED core, so do not set the acpi_handle field of struct fujitsu_laptop to NULL inside acpi_fujitsu_laptop_remove() to prevent call_fext_func() from generating errors upon module removal. Signed-off-by: Michał Kępień <kernel@kempniu.pl> Reviewed-by: Jonathan Woithe <jwoithe@just42.net> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-04-07 21:07:11 +08:00
static int acpi_fujitsu_laptop_leds_register(struct acpi_device *device)
{
struct fujitsu_laptop *priv = acpi_driver_data(device);
struct led_classdev *led;
int ret;
if (call_fext_func(device,
FUNC_LEDS, 0x0, 0x0, 0x0) & LOGOLAMP_POWERON) {
led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL);
if (!led)
return -ENOMEM;
led->name = "fujitsu::logolamp";
led->brightness_set_blocking = logolamp_set;
led->brightness_get = logolamp_get;
ret = devm_led_classdev_register(&device->dev, led);
if (ret)
return ret;
}
if ((call_fext_func(device,
FUNC_LEDS, 0x0, 0x0, 0x0) & KEYBOARD_LAMPS) &&
(call_fext_func(device, FUNC_BUTTONS, 0x0, 0x0, 0x0) == 0x0)) {
led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL);
if (!led)
return -ENOMEM;
led->name = "fujitsu::kblamps";
led->brightness_set_blocking = kblamps_set;
led->brightness_get = kblamps_get;
ret = devm_led_classdev_register(&device->dev, led);
if (ret)
return ret;
}
/*
* Some Fujitsu laptops have a radio toggle button in place of a slide
* switch and all such machines appear to also have an RF LED. Based on
* comparing DSDT tables of four Fujitsu Lifebook models (E744, E751,
* S7110, S8420; the first one has a radio toggle button, the other
* three have slide switches), bit 17 of flags_supported (the value
* returned by method S000 of ACPI device FUJ02E3) seems to indicate
* whether given model has a radio toggle button.
*/
if (priv->flags_supported & BIT(17)) {
led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL);
if (!led)
return -ENOMEM;
led->name = "fujitsu::radio_led";
led->brightness_set_blocking = radio_led_set;
led->brightness_get = radio_led_get;
led->default_trigger = "rfkill-any";
ret = devm_led_classdev_register(&device->dev, led);
if (ret)
return ret;
}
/* Support for eco led is not always signaled in bit corresponding
* to the bit used to control the led. According to the DSDT table,
* bit 14 seems to indicate presence of said led as well.
* Confirm by testing the status.
*/
if ((call_fext_func(device, FUNC_LEDS, 0x0, 0x0, 0x0) & BIT(14)) &&
(call_fext_func(device,
FUNC_LEDS, 0x2, ECO_LED, 0x0) != UNSUPPORTED_CMD)) {
led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL);
if (!led)
return -ENOMEM;
led->name = "fujitsu::eco_led";
led->brightness_set_blocking = eco_led_set;
led->brightness_get = eco_led_get;
ret = devm_led_classdev_register(&device->dev, led);
if (ret)
return ret;
}
return 0;
}
static int acpi_fujitsu_laptop_add(struct acpi_device *device)
{
struct fujitsu_laptop *priv;
int ret, i = 0;
priv = devm_kzalloc(&device->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
platform/x86: fujitsu-laptop: track the last instantiated FUJ02E3 ACPI device fujitsu-laptop registers two ACPI drivers: one for ACPI device FUJ02B1 enabling backlight control and another for ACPI device FUJ02E3 which handles various other stuff (hotkeys, LEDs, etc.) In a perfect world, private data used by each of these drivers would be neatly encapsulated in a structure specific to a given driver instance. Sadly, firmware present on some Fujitsu laptops makes that impossible by exposing backlight power control (which is what the FUJ02B1 ACPI device should take care of) through the FUJ02E3 ACPI device. This means the backlight driver needs a way to access an ACPI device it is not bound to. When the backlight driver is extracted into a separate module, it will not be able to rely on a module-wide variable any more and such access will happen through an API exposed by fujitsu-laptop. For all known firmwares out in the wild, it seems that whenever the FUJ02B1 ACPI device is present, it is always accompanied by a single instance of the FUJ02E3 ACPI device. We could independently grab an ACPI handle to the FUJ02E3 ACPI device from the backlight driver, but that would require using a hardcoded absolute path to that ACPI device, which is subject to change. It is easier to simply store a module-wide pointer to the last (most likely only) FUJ02E3 ACPI device found, make the aforementioned API use it and cover our bases by warning the user if firmware exposes multiple FUJ02E3 ACPI devices. Introducing this pointer in advance allows us to get rid of the acpi_handle field of struct fujitsu_bl and also enables a bit more step-by-step migration to a device-specific implementation of call_fext_func(). Signed-off-by: Michał Kępień <kernel@kempniu.pl> Reviewed-by: Jonathan Woithe <jwoithe@just42.net> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-05-19 15:44:45 +08:00
WARN_ONCE(fext, "More than one FUJ02E3 ACPI device was found. Driver may not work as intended.");
fext = device;
strcpy(acpi_device_name(device), ACPI_FUJITSU_LAPTOP_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_FUJITSU_CLASS);
device->driver_data = priv;
/* kfifo */
spin_lock_init(&priv->fifo_lock);
ret = kfifo_alloc(&priv->fifo, RINGBUFFERSIZE * sizeof(int),
GFP_KERNEL);
if (ret)
return ret;
pr_info("ACPI: %s [%s]\n",
acpi_device_name(device), acpi_device_bid(device));
while (call_fext_func(device, FUNC_BUTTONS, 0x1, 0x0, 0x0) != 0 &&
i++ < MAX_HOTKEY_RINGBUFFER_SIZE)
; /* No action, result is discarded */
acpi_handle_debug(device->handle, "Discarded %i ringbuffer entries\n",
i);
priv->flags_supported = call_fext_func(device, FUNC_FLAGS, 0x0, 0x0,
0x0);
/* Make sure our bitmask of supported functions is cleared if the
RFKILL function block is not implemented, like on the S7020. */
if (priv->flags_supported == UNSUPPORTED_CMD)
priv->flags_supported = 0;
if (priv->flags_supported)
priv->flags_state = call_fext_func(device, FUNC_FLAGS, 0x4, 0x0,
0x0);
/* Suspect this is a keymap of the application panel, print it */
acpi_handle_info(device->handle, "BTNI: [0x%x]\n",
call_fext_func(device, FUNC_BUTTONS, 0x0, 0x0, 0x0));
/* Sync backlight power status */
if (fujitsu_bl && fujitsu_bl->bl_device &&
acpi_video_get_backlight_type() == acpi_backlight_vendor) {
if (call_fext_func(fext, FUNC_BACKLIGHT, 0x2,
BACKLIGHT_PARAM_POWER, 0x0) == BACKLIGHT_OFF)
fujitsu_bl->bl_device->props.power = FB_BLANK_POWERDOWN;
else
fujitsu_bl->bl_device->props.power = FB_BLANK_UNBLANK;
}
ret = acpi_fujitsu_laptop_input_setup(device);
if (ret)
goto err_free_fifo;
ret = acpi_fujitsu_laptop_leds_register(device);
if (ret)
goto err_free_fifo;
ret = fujitsu_laptop_platform_add(device);
if (ret)
goto err_free_fifo;
return 0;
err_free_fifo:
kfifo_free(&priv->fifo);
return ret;
}
static int acpi_fujitsu_laptop_remove(struct acpi_device *device)
{
struct fujitsu_laptop *priv = acpi_driver_data(device);
fujitsu_laptop_platform_remove(device);
kfifo_free(&priv->fifo);
return 0;
}
static void acpi_fujitsu_laptop_press(struct acpi_device *device, int scancode)
{
struct fujitsu_laptop *priv = acpi_driver_data(device);
int ret;
ret = kfifo_in_locked(&priv->fifo, (unsigned char *)&scancode,
sizeof(scancode), &priv->fifo_lock);
if (ret != sizeof(scancode)) {
dev_info(&priv->input->dev, "Could not push scancode [0x%x]\n",
scancode);
return;
}
sparse_keymap_report_event(priv->input, scancode, 1, false);
dev_dbg(&priv->input->dev, "Push scancode into ringbuffer [0x%x]\n",
scancode);
}
static void acpi_fujitsu_laptop_release(struct acpi_device *device)
{
struct fujitsu_laptop *priv = acpi_driver_data(device);
int scancode, ret;
while (true) {
ret = kfifo_out_locked(&priv->fifo, (unsigned char *)&scancode,
sizeof(scancode), &priv->fifo_lock);
if (ret != sizeof(scancode))
return;
sparse_keymap_report_event(priv->input, scancode, 0, false);
dev_dbg(&priv->input->dev,
"Pop scancode from ringbuffer [0x%x]\n", scancode);
}
}
static void acpi_fujitsu_laptop_notify(struct acpi_device *device, u32 event)
{
struct fujitsu_laptop *priv = acpi_driver_data(device);
int scancode, i = 0;
unsigned int irb;
if (event != ACPI_FUJITSU_NOTIFY_CODE) {
acpi_handle_info(device->handle, "Unsupported event [0x%x]\n",
event);
sparse_keymap_report_event(priv->input, -1, 1, true);
return;
}
if (priv->flags_supported)
priv->flags_state = call_fext_func(device, FUNC_FLAGS, 0x4, 0x0,
0x0);
while ((irb = call_fext_func(device,
FUNC_BUTTONS, 0x1, 0x0, 0x0)) != 0 &&
i++ < MAX_HOTKEY_RINGBUFFER_SIZE) {
scancode = irb & 0x4ff;
if (sparse_keymap_entry_from_scancode(priv->input, scancode))
acpi_fujitsu_laptop_press(device, scancode);
else if (scancode == 0)
acpi_fujitsu_laptop_release(device);
else
acpi_handle_info(device->handle,
"Unknown GIRB result [%x]\n", irb);
}
/* On some models (first seen on the Skylake-based Lifebook
* E736/E746/E756), the touchpad toggle hotkey (Fn+F4) is
* handled in software; its state is queried using FUNC_FLAGS
*/
if ((priv->flags_supported & BIT(26)) &&
(call_fext_func(device, FUNC_FLAGS, 0x1, 0x0, 0x0) & BIT(26)))
sparse_keymap_report_event(priv->input, BIT(26), 1, true);
}
/* Initialization */
static const struct acpi_device_id fujitsu_bl_device_ids[] = {
{ACPI_FUJITSU_BL_HID, 0},
{"", 0},
};
static struct acpi_driver acpi_fujitsu_bl_driver = {
.name = ACPI_FUJITSU_BL_DRIVER_NAME,
.class = ACPI_FUJITSU_CLASS,
.ids = fujitsu_bl_device_ids,
.ops = {
.add = acpi_fujitsu_bl_add,
.notify = acpi_fujitsu_bl_notify,
},
};
static const struct acpi_device_id fujitsu_laptop_device_ids[] = {
{ACPI_FUJITSU_LAPTOP_HID, 0},
{"", 0},
};
static struct acpi_driver acpi_fujitsu_laptop_driver = {
.name = ACPI_FUJITSU_LAPTOP_DRIVER_NAME,
.class = ACPI_FUJITSU_CLASS,
.ids = fujitsu_laptop_device_ids,
.ops = {
.add = acpi_fujitsu_laptop_add,
.remove = acpi_fujitsu_laptop_remove,
.notify = acpi_fujitsu_laptop_notify,
},
};
static const struct acpi_device_id fujitsu_ids[] __used = {
{ACPI_FUJITSU_BL_HID, 0},
{ACPI_FUJITSU_LAPTOP_HID, 0},
{"", 0}
};
MODULE_DEVICE_TABLE(acpi, fujitsu_ids);
static int __init fujitsu_init(void)
{
int ret;
ret = acpi_bus_register_driver(&acpi_fujitsu_bl_driver);
if (ret)
return ret;
/* Register platform stuff */
ret = platform_driver_register(&fujitsu_pf_driver);
if (ret)
goto err_unregister_acpi;
/* Register laptop driver */
ret = acpi_bus_register_driver(&acpi_fujitsu_laptop_driver);
if (ret)
goto err_unregister_platform_driver;
pr_info("driver " FUJITSU_DRIVER_VERSION " successfully loaded\n");
return 0;
err_unregister_platform_driver:
platform_driver_unregister(&fujitsu_pf_driver);
err_unregister_acpi:
acpi_bus_unregister_driver(&acpi_fujitsu_bl_driver);
return ret;
}
static void __exit fujitsu_cleanup(void)
{
acpi_bus_unregister_driver(&acpi_fujitsu_laptop_driver);
platform_driver_unregister(&fujitsu_pf_driver);
acpi_bus_unregister_driver(&acpi_fujitsu_bl_driver);
pr_info("driver unloaded\n");
}
module_init(fujitsu_init);
module_exit(fujitsu_cleanup);
module_param(use_alt_lcd_levels, int, 0644);
MODULE_PARM_DESC(use_alt_lcd_levels, "Interface used for setting LCD brightness level (-1 = auto, 0 = force SBLL, 1 = force SBL2)");
module_param(disable_brightness_adjust, bool, 0644);
MODULE_PARM_DESC(disable_brightness_adjust, "Disable LCD brightness adjustment");
MODULE_AUTHOR("Jonathan Woithe, Peter Gruber, Tony Vroon");
MODULE_DESCRIPTION("Fujitsu laptop extras support");
MODULE_VERSION(FUJITSU_DRIVER_VERSION);
MODULE_LICENSE("GPL");