linux/drivers/watchdog/watchdog_dev.c

1159 lines
29 KiB
C
Raw Normal View History

/*
* watchdog_dev.c
*
* (c) Copyright 2008-2011 Alan Cox <alan@lxorguk.ukuu.org.uk>,
* All Rights Reserved.
*
* (c) Copyright 2008-2011 Wim Van Sebroeck <wim@iguana.be>.
*
*
* This source code is part of the generic code that can be used
* by all the watchdog timer drivers.
*
* This part of the generic code takes care of the following
* misc device: /dev/watchdog.
*
* Based on source code of the following authors:
* Matt Domsch <Matt_Domsch@dell.com>,
* Rob Radez <rob@osinvestor.com>,
* Rusty Lynch <rusty@linux.co.intel.com>
* Satyam Sharma <satyam@infradead.org>
* Randy Dunlap <randy.dunlap@oracle.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Neither Alan Cox, CymruNet Ltd., Wim Van Sebroeck nor Iguana vzw.
* admit liability nor provide warranty for any of this software.
* This material is provided "AS-IS" and at no charge.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
#include <linux/cdev.h> /* For character device */
#include <linux/errno.h> /* For the -ENODEV/... values */
#include <linux/fs.h> /* For file operations */
#include <linux/init.h> /* For __init/__exit/... */
#include <linux/jiffies.h> /* For timeout functions */
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
#include <linux/kernel.h> /* For printk/panic/... */
#include <linux/kref.h> /* For data references */
#include <linux/miscdevice.h> /* For handling misc devices */
#include <linux/module.h> /* For module stuff/... */
#include <linux/mutex.h> /* For mutexes */
#include <linux/reboot.h> /* For reboot notifier */
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
#include <linux/slab.h> /* For memory functions */
#include <linux/types.h> /* For standard types (like size_t) */
#include <linux/watchdog.h> /* For watchdog specific items */
#include <linux/workqueue.h> /* For workqueue */
#include <linux/uaccess.h> /* For copy_to_user/put_user/... */
#include "watchdog_core.h"
#include "watchdog_pretimeout.h"
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
/*
* struct watchdog_core_data - watchdog core internal data
* @kref: Reference count.
* @cdev: The watchdog's Character device.
* @wdd: Pointer to watchdog device.
* @lock: Lock for watchdog core.
* @status: Watchdog core internal status bits.
*/
struct watchdog_core_data {
struct kref kref;
struct cdev cdev;
struct watchdog_device *wdd;
struct mutex lock;
unsigned long last_keepalive;
unsigned long last_hw_keepalive;
struct delayed_work work;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
unsigned long status; /* Internal status bits */
#define _WDOG_DEV_OPEN 0 /* Opened ? */
#define _WDOG_ALLOW_RELEASE 1 /* Did we receive the magic char ? */
#define _WDOG_KEEPALIVE 2 /* Did we receive a keepalive ? */
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
};
/* the dev_t structure to store the dynamically allocated watchdog devices */
static dev_t watchdog_devt;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
/* Reference to watchdog device behind /dev/watchdog */
static struct watchdog_core_data *old_wd_data;
static struct workqueue_struct *watchdog_wq;
static bool handle_boot_enabled =
IS_ENABLED(CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED);
static inline bool watchdog_need_worker(struct watchdog_device *wdd)
{
/* All variables in milli-seconds */
unsigned int hm = wdd->max_hw_heartbeat_ms;
unsigned int t = wdd->timeout * 1000;
/*
* A worker to generate heartbeat requests is needed if all of the
* following conditions are true.
* - Userspace activated the watchdog.
* - The driver provided a value for the maximum hardware timeout, and
* thus is aware that the framework supports generating heartbeat
* requests.
* - Userspace requests a longer timeout than the hardware can handle.
watchdog: change watchdog_need_worker logic If the driver indicates that the watchdog is running, the framework should feed it until userspace opens the device, regardless of whether the driver has set max_hw_heartbeat_ms. This patch only affects the case where wdd->max_hw_heartbeat_ms is zero, wdd->timeout is non-zero, the watchdog is not active and the hardware device is running (*): - If wdd->timeout is zero, watchdog_need_worker() returns false both before and after this patch, and watchdog_next_keepalive() is not called. - If watchdog_active(wdd), the return value from watchdog_need_worker is also the same as before (namely, hm && t > hm). Hence in that case, watchdog_next_keepalive() is only called if hm == max_hw_heartbeat_ms is non-zero, so the change to min_not_zero there is a no-op. - If the watchdog is not active and the device is not running, we return false from watchdog_need_worker just as before. That leaves the watchdog_hw_running(wdd) && !watchdog_active(wdd) && wdd->timeout case. Again, it's easy to see that if wdd->max_hw_heartbeat_ms is non-zero, we return true from watchdog_need_worker with and without this patch, and the logic in watchdog_next_keepalive is unchanged. Finally, if wdd->max_hw_heartbeat_ms is 0, we used to end up in the cancel_delayed_work branch, whereas with this patch we end up scheduling a ping timeout_ms/2 from now. (*) This should imply that no current kernel drivers are affected, since the only drivers which explicitly set WDOG_HW_RUNNING are imx2_wdt.c and dw_wdt.c, both of which also provide a non-zero value for max_hw_heartbeat_ms. The watchdog core also sets WDOG_HW_RUNNING, but only when the driver doesn't provide ->stop, in which case it must, according to Documentation/watchdog/watchdog-kernel-api.txt, set max_hw_heartbeat_ms. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-07-14 17:16:26 +08:00
*
* Alternatively, if userspace has not opened the watchdog
* device, we take care of feeding the watchdog if it is
* running.
*/
watchdog: change watchdog_need_worker logic If the driver indicates that the watchdog is running, the framework should feed it until userspace opens the device, regardless of whether the driver has set max_hw_heartbeat_ms. This patch only affects the case where wdd->max_hw_heartbeat_ms is zero, wdd->timeout is non-zero, the watchdog is not active and the hardware device is running (*): - If wdd->timeout is zero, watchdog_need_worker() returns false both before and after this patch, and watchdog_next_keepalive() is not called. - If watchdog_active(wdd), the return value from watchdog_need_worker is also the same as before (namely, hm && t > hm). Hence in that case, watchdog_next_keepalive() is only called if hm == max_hw_heartbeat_ms is non-zero, so the change to min_not_zero there is a no-op. - If the watchdog is not active and the device is not running, we return false from watchdog_need_worker just as before. That leaves the watchdog_hw_running(wdd) && !watchdog_active(wdd) && wdd->timeout case. Again, it's easy to see that if wdd->max_hw_heartbeat_ms is non-zero, we return true from watchdog_need_worker with and without this patch, and the logic in watchdog_next_keepalive is unchanged. Finally, if wdd->max_hw_heartbeat_ms is 0, we used to end up in the cancel_delayed_work branch, whereas with this patch we end up scheduling a ping timeout_ms/2 from now. (*) This should imply that no current kernel drivers are affected, since the only drivers which explicitly set WDOG_HW_RUNNING are imx2_wdt.c and dw_wdt.c, both of which also provide a non-zero value for max_hw_heartbeat_ms. The watchdog core also sets WDOG_HW_RUNNING, but only when the driver doesn't provide ->stop, in which case it must, according to Documentation/watchdog/watchdog-kernel-api.txt, set max_hw_heartbeat_ms. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-07-14 17:16:26 +08:00
return (hm && watchdog_active(wdd) && t > hm) ||
(t && !watchdog_active(wdd) && watchdog_hw_running(wdd));
}
static long watchdog_next_keepalive(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data = wdd->wd_data;
unsigned int timeout_ms = wdd->timeout * 1000;
unsigned long keepalive_interval;
unsigned long last_heartbeat;
unsigned long virt_timeout;
unsigned int hw_heartbeat_ms;
virt_timeout = wd_data->last_keepalive + msecs_to_jiffies(timeout_ms);
watchdog: change watchdog_need_worker logic If the driver indicates that the watchdog is running, the framework should feed it until userspace opens the device, regardless of whether the driver has set max_hw_heartbeat_ms. This patch only affects the case where wdd->max_hw_heartbeat_ms is zero, wdd->timeout is non-zero, the watchdog is not active and the hardware device is running (*): - If wdd->timeout is zero, watchdog_need_worker() returns false both before and after this patch, and watchdog_next_keepalive() is not called. - If watchdog_active(wdd), the return value from watchdog_need_worker is also the same as before (namely, hm && t > hm). Hence in that case, watchdog_next_keepalive() is only called if hm == max_hw_heartbeat_ms is non-zero, so the change to min_not_zero there is a no-op. - If the watchdog is not active and the device is not running, we return false from watchdog_need_worker just as before. That leaves the watchdog_hw_running(wdd) && !watchdog_active(wdd) && wdd->timeout case. Again, it's easy to see that if wdd->max_hw_heartbeat_ms is non-zero, we return true from watchdog_need_worker with and without this patch, and the logic in watchdog_next_keepalive is unchanged. Finally, if wdd->max_hw_heartbeat_ms is 0, we used to end up in the cancel_delayed_work branch, whereas with this patch we end up scheduling a ping timeout_ms/2 from now. (*) This should imply that no current kernel drivers are affected, since the only drivers which explicitly set WDOG_HW_RUNNING are imx2_wdt.c and dw_wdt.c, both of which also provide a non-zero value for max_hw_heartbeat_ms. The watchdog core also sets WDOG_HW_RUNNING, but only when the driver doesn't provide ->stop, in which case it must, according to Documentation/watchdog/watchdog-kernel-api.txt, set max_hw_heartbeat_ms. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-07-14 17:16:26 +08:00
hw_heartbeat_ms = min_not_zero(timeout_ms, wdd->max_hw_heartbeat_ms);
keepalive_interval = msecs_to_jiffies(hw_heartbeat_ms / 2);
if (!watchdog_active(wdd))
return keepalive_interval;
/*
* To ensure that the watchdog times out wdd->timeout seconds
* after the most recent ping from userspace, the last
* worker ping has to come in hw_heartbeat_ms before this timeout.
*/
last_heartbeat = virt_timeout - msecs_to_jiffies(hw_heartbeat_ms);
return min_t(long, last_heartbeat - jiffies, keepalive_interval);
}
static inline void watchdog_update_worker(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data = wdd->wd_data;
if (watchdog_need_worker(wdd)) {
long t = watchdog_next_keepalive(wdd);
if (t > 0)
mod_delayed_work(watchdog_wq, &wd_data->work, t);
} else {
cancel_delayed_work(&wd_data->work);
}
}
static int __watchdog_ping(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data = wdd->wd_data;
unsigned long earliest_keepalive = wd_data->last_hw_keepalive +
msecs_to_jiffies(wdd->min_hw_heartbeat_ms);
int err;
if (time_is_after_jiffies(earliest_keepalive)) {
mod_delayed_work(watchdog_wq, &wd_data->work,
earliest_keepalive - jiffies);
return 0;
}
wd_data->last_hw_keepalive = jiffies;
if (wdd->ops->ping)
err = wdd->ops->ping(wdd); /* ping the watchdog */
else
err = wdd->ops->start(wdd); /* restart watchdog */
watchdog_update_worker(wdd);
return err;
}
/*
* watchdog_ping: ping the watchdog.
* @wdd: the watchdog device to ping
*
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
* The caller must hold wd_data->lock.
*
* If the watchdog has no own ping operation then it needs to be
* restarted via the start operation. This wrapper function does
* exactly that.
* We only ping when the watchdog device is running.
*/
static int watchdog_ping(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data = wdd->wd_data;
if (!watchdog_active(wdd) && !watchdog_hw_running(wdd))
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
return 0;
set_bit(_WDOG_KEEPALIVE, &wd_data->status);
wd_data->last_keepalive = jiffies;
return __watchdog_ping(wdd);
}
static bool watchdog_worker_should_ping(struct watchdog_core_data *wd_data)
{
struct watchdog_device *wdd = wd_data->wdd;
return wdd && (watchdog_active(wdd) || watchdog_hw_running(wdd));
}
static void watchdog_ping_work(struct work_struct *work)
{
struct watchdog_core_data *wd_data;
wd_data = container_of(to_delayed_work(work), struct watchdog_core_data,
work);
mutex_lock(&wd_data->lock);
if (watchdog_worker_should_ping(wd_data))
__watchdog_ping(wd_data->wdd);
mutex_unlock(&wd_data->lock);
}
/*
* watchdog_start: wrapper to start the watchdog.
* @wdd: the watchdog device to start
*
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
* The caller must hold wd_data->lock.
*
* Start the watchdog if it is not active and mark it active.
* This function returns zero on success or a negative errno code for
* failure.
*/
static int watchdog_start(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data = wdd->wd_data;
unsigned long started_at;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
int err;
if (watchdog_active(wdd))
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
return 0;
set_bit(_WDOG_KEEPALIVE, &wd_data->status);
started_at = jiffies;
if (watchdog_hw_running(wdd) && wdd->ops->ping)
err = wdd->ops->ping(wdd);
else
err = wdd->ops->start(wdd);
if (err == 0) {
set_bit(WDOG_ACTIVE, &wdd->status);
wd_data->last_keepalive = started_at;
watchdog_update_worker(wdd);
}
return err;
}
/*
* watchdog_stop: wrapper to stop the watchdog.
* @wdd: the watchdog device to stop
*
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
* The caller must hold wd_data->lock.
*
* Stop the watchdog if it is still active and unmark it active.
* This function returns zero on success or a negative errno code for
* failure.
* If the 'nowayout' feature was set, the watchdog cannot be stopped.
*/
static int watchdog_stop(struct watchdog_device *wdd)
{
int err = 0;
if (!watchdog_active(wdd))
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
return 0;
if (test_bit(WDOG_NO_WAY_OUT, &wdd->status)) {
pr_info("watchdog%d: nowayout prevents watchdog being stopped!\n",
wdd->id);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
return -EBUSY;
}
if (wdd->ops->stop) {
clear_bit(WDOG_HW_RUNNING, &wdd->status);
err = wdd->ops->stop(wdd);
} else {
set_bit(WDOG_HW_RUNNING, &wdd->status);
}
if (err == 0) {
clear_bit(WDOG_ACTIVE, &wdd->status);
watchdog_update_worker(wdd);
}
return err;
}
/*
* watchdog_get_status: wrapper to get the watchdog status
* @wdd: the watchdog device to get the status from
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
*
* The caller must hold wd_data->lock.
*
* Get the watchdog's status flags.
*/
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
static unsigned int watchdog_get_status(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data = wdd->wd_data;
unsigned int status;
if (wdd->ops->status)
status = wdd->ops->status(wdd);
else
status = wdd->bootstatus & (WDIOF_CARDRESET |
WDIOF_OVERHEAT |
WDIOF_FANFAULT |
WDIOF_EXTERN1 |
WDIOF_EXTERN2 |
WDIOF_POWERUNDER |
WDIOF_POWEROVER);
if (test_bit(_WDOG_ALLOW_RELEASE, &wd_data->status))
status |= WDIOF_MAGICCLOSE;
if (test_and_clear_bit(_WDOG_KEEPALIVE, &wd_data->status))
status |= WDIOF_KEEPALIVEPING;
return status;
}
/*
* watchdog_set_timeout: set the watchdog timer timeout
* @wdd: the watchdog device to set the timeout for
* @timeout: timeout to set in seconds
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
*
* The caller must hold wd_data->lock.
*/
static int watchdog_set_timeout(struct watchdog_device *wdd,
unsigned int timeout)
{
int err = 0;
if (!(wdd->info->options & WDIOF_SETTIMEOUT))
return -EOPNOTSUPP;
if (watchdog_timeout_invalid(wdd, timeout))
return -EINVAL;
if (wdd->ops->set_timeout) {
err = wdd->ops->set_timeout(wdd, timeout);
} else {
wdd->timeout = timeout;
/* Disable pretimeout if it doesn't fit the new timeout */
if (wdd->pretimeout >= wdd->timeout)
wdd->pretimeout = 0;
}
watchdog_update_worker(wdd);
return err;
}
/*
* watchdog_set_pretimeout: set the watchdog timer pretimeout
* @wdd: the watchdog device to set the timeout for
* @timeout: pretimeout to set in seconds
*/
static int watchdog_set_pretimeout(struct watchdog_device *wdd,
unsigned int timeout)
{
int err = 0;
if (!(wdd->info->options & WDIOF_PRETIMEOUT))
return -EOPNOTSUPP;
if (watchdog_pretimeout_invalid(wdd, timeout))
return -EINVAL;
if (wdd->ops->set_pretimeout)
err = wdd->ops->set_pretimeout(wdd, timeout);
else
wdd->pretimeout = timeout;
return err;
}
/*
* watchdog_get_timeleft: wrapper to get the time left before a reboot
* @wdd: the watchdog device to get the remaining time from
* @timeleft: the time that's left
*
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
* The caller must hold wd_data->lock.
*
* Get the time before a watchdog will reboot (if not pinged).
*/
static int watchdog_get_timeleft(struct watchdog_device *wdd,
unsigned int *timeleft)
{
*timeleft = 0;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
if (!wdd->ops->get_timeleft)
return -EOPNOTSUPP;
*timeleft = wdd->ops->get_timeleft(wdd);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
return 0;
}
#ifdef CONFIG_WATCHDOG_SYSFS
static ssize_t nowayout_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", !!test_bit(WDOG_NO_WAY_OUT, &wdd->status));
}
static DEVICE_ATTR_RO(nowayout);
static ssize_t status_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct watchdog_core_data *wd_data = wdd->wd_data;
unsigned int status;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
mutex_lock(&wd_data->lock);
status = watchdog_get_status(wdd);
mutex_unlock(&wd_data->lock);
return sprintf(buf, "0x%x\n", status);
}
static DEVICE_ATTR_RO(status);
static ssize_t bootstatus_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", wdd->bootstatus);
}
static DEVICE_ATTR_RO(bootstatus);
static ssize_t timeleft_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct watchdog_core_data *wd_data = wdd->wd_data;
ssize_t status;
unsigned int val;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
mutex_lock(&wd_data->lock);
status = watchdog_get_timeleft(wdd, &val);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
mutex_unlock(&wd_data->lock);
if (!status)
status = sprintf(buf, "%u\n", val);
return status;
}
static DEVICE_ATTR_RO(timeleft);
static ssize_t timeout_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", wdd->timeout);
}
static DEVICE_ATTR_RO(timeout);
static ssize_t pretimeout_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", wdd->pretimeout);
}
static DEVICE_ATTR_RO(pretimeout);
static ssize_t identity_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
return sprintf(buf, "%s\n", wdd->info->identity);
}
static DEVICE_ATTR_RO(identity);
static ssize_t state_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
if (watchdog_active(wdd))
return sprintf(buf, "active\n");
return sprintf(buf, "inactive\n");
}
static DEVICE_ATTR_RO(state);
static ssize_t pretimeout_available_governors_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return watchdog_pretimeout_available_governors_get(buf);
}
static DEVICE_ATTR_RO(pretimeout_available_governors);
static ssize_t pretimeout_governor_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
return watchdog_pretimeout_governor_get(wdd, buf);
}
static ssize_t pretimeout_governor_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct watchdog_device *wdd = dev_get_drvdata(dev);
int ret = watchdog_pretimeout_governor_set(wdd, buf);
if (!ret)
ret = count;
return ret;
}
static DEVICE_ATTR_RW(pretimeout_governor);
static umode_t wdt_is_visible(struct kobject *kobj, struct attribute *attr,
int n)
{
struct device *dev = container_of(kobj, struct device, kobj);
struct watchdog_device *wdd = dev_get_drvdata(dev);
umode_t mode = attr->mode;
if (attr == &dev_attr_timeleft.attr && !wdd->ops->get_timeleft)
mode = 0;
else if (attr == &dev_attr_pretimeout.attr &&
!(wdd->info->options & WDIOF_PRETIMEOUT))
mode = 0;
else if ((attr == &dev_attr_pretimeout_governor.attr ||
attr == &dev_attr_pretimeout_available_governors.attr) &&
(!(wdd->info->options & WDIOF_PRETIMEOUT) ||
!IS_ENABLED(CONFIG_WATCHDOG_PRETIMEOUT_GOV)))
mode = 0;
return mode;
}
static struct attribute *wdt_attrs[] = {
&dev_attr_state.attr,
&dev_attr_identity.attr,
&dev_attr_timeout.attr,
&dev_attr_pretimeout.attr,
&dev_attr_timeleft.attr,
&dev_attr_bootstatus.attr,
&dev_attr_status.attr,
&dev_attr_nowayout.attr,
&dev_attr_pretimeout_governor.attr,
&dev_attr_pretimeout_available_governors.attr,
NULL,
};
static const struct attribute_group wdt_group = {
.attrs = wdt_attrs,
.is_visible = wdt_is_visible,
};
__ATTRIBUTE_GROUPS(wdt);
#else
#define wdt_groups NULL
#endif
/*
* watchdog_ioctl_op: call the watchdog drivers ioctl op if defined
* @wdd: the watchdog device to do the ioctl on
* @cmd: watchdog command
* @arg: argument pointer
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
*
* The caller must hold wd_data->lock.
*/
static int watchdog_ioctl_op(struct watchdog_device *wdd, unsigned int cmd,
unsigned long arg)
{
if (!wdd->ops->ioctl)
return -ENOIOCTLCMD;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
return wdd->ops->ioctl(wdd, cmd, arg);
}
/*
* watchdog_write: writes to the watchdog.
* @file: file from VFS
* @data: user address of data
* @len: length of data
* @ppos: pointer to the file offset
*
* A write to a watchdog device is defined as a keepalive ping.
* Writing the magic 'V' sequence allows the next close to turn
* off the watchdog (if 'nowayout' is not set).
*/
static ssize_t watchdog_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos)
{
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct watchdog_core_data *wd_data = file->private_data;
struct watchdog_device *wdd;
int err;
size_t i;
char c;
if (len == 0)
return 0;
/*
* Note: just in case someone wrote the magic character
* five months ago...
*/
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
clear_bit(_WDOG_ALLOW_RELEASE, &wd_data->status);
/* scan to see whether or not we got the magic character */
for (i = 0; i != len; i++) {
if (get_user(c, data + i))
return -EFAULT;
if (c == 'V')
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
set_bit(_WDOG_ALLOW_RELEASE, &wd_data->status);
}
/* someone wrote to us, so we send the watchdog a keepalive ping */
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
err = -ENODEV;
mutex_lock(&wd_data->lock);
wdd = wd_data->wdd;
if (wdd)
err = watchdog_ping(wdd);
mutex_unlock(&wd_data->lock);
if (err < 0)
return err;
return len;
}
/*
* watchdog_ioctl: handle the different ioctl's for the watchdog device.
* @file: file handle to the device
* @cmd: watchdog command
* @arg: argument pointer
*
* The watchdog API defines a common set of functions for all watchdogs
* according to their available features.
*/
static long watchdog_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct watchdog_core_data *wd_data = file->private_data;
void __user *argp = (void __user *)arg;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct watchdog_device *wdd;
int __user *p = argp;
unsigned int val;
int err;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
mutex_lock(&wd_data->lock);
wdd = wd_data->wdd;
if (!wdd) {
err = -ENODEV;
goto out_ioctl;
}
err = watchdog_ioctl_op(wdd, cmd, arg);
if (err != -ENOIOCTLCMD)
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
goto out_ioctl;
switch (cmd) {
case WDIOC_GETSUPPORT:
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
err = copy_to_user(argp, wdd->info,
sizeof(struct watchdog_info)) ? -EFAULT : 0;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
break;
case WDIOC_GETSTATUS:
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
val = watchdog_get_status(wdd);
err = put_user(val, p);
break;
case WDIOC_GETBOOTSTATUS:
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
err = put_user(wdd->bootstatus, p);
break;
case WDIOC_SETOPTIONS:
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
if (get_user(val, p)) {
err = -EFAULT;
break;
}
if (val & WDIOS_DISABLECARD) {
err = watchdog_stop(wdd);
if (err < 0)
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
break;
}
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
if (val & WDIOS_ENABLECARD)
err = watchdog_start(wdd);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
break;
case WDIOC_KEEPALIVE:
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
if (!(wdd->info->options & WDIOF_KEEPALIVEPING)) {
err = -EOPNOTSUPP;
break;
}
err = watchdog_ping(wdd);
break;
case WDIOC_SETTIMEOUT:
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
if (get_user(val, p)) {
err = -EFAULT;
break;
}
err = watchdog_set_timeout(wdd, val);
if (err < 0)
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
break;
/* If the watchdog is active then we send a keepalive ping
* to make sure that the watchdog keep's running (and if
* possible that it takes the new timeout) */
err = watchdog_ping(wdd);
if (err < 0)
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
break;
/* Fall */
case WDIOC_GETTIMEOUT:
/* timeout == 0 means that we don't know the timeout */
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
if (wdd->timeout == 0) {
err = -EOPNOTSUPP;
break;
}
err = put_user(wdd->timeout, p);
break;
case WDIOC_GETTIMELEFT:
err = watchdog_get_timeleft(wdd, &val);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
if (err < 0)
break;
err = put_user(val, p);
break;
case WDIOC_SETPRETIMEOUT:
if (get_user(val, p)) {
err = -EFAULT;
break;
}
err = watchdog_set_pretimeout(wdd, val);
break;
case WDIOC_GETPRETIMEOUT:
err = put_user(wdd->pretimeout, p);
break;
default:
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
err = -ENOTTY;
break;
}
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
out_ioctl:
mutex_unlock(&wd_data->lock);
return err;
}
/*
* watchdog_open: open the /dev/watchdog* devices.
* @inode: inode of device
* @file: file handle to device
*
* When the /dev/watchdog* device gets opened, we start the watchdog.
* Watch out: the /dev/watchdog device is single open, so we make sure
* it can only be opened once.
*/
static int watchdog_open(struct inode *inode, struct file *file)
{
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct watchdog_core_data *wd_data;
struct watchdog_device *wdd;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
int err;
/* Get the corresponding watchdog device */
if (imajor(inode) == MISC_MAJOR)
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
wd_data = old_wd_data;
else
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
wd_data = container_of(inode->i_cdev, struct watchdog_core_data,
cdev);
/* the watchdog is single open! */
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
if (test_and_set_bit(_WDOG_DEV_OPEN, &wd_data->status))
return -EBUSY;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
wdd = wd_data->wdd;
/*
* If the /dev/watchdog device is open, we don't want the module
* to be unloaded.
*/
if (!watchdog_hw_running(wdd) && !try_module_get(wdd->ops->owner)) {
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
err = -EBUSY;
goto out_clear;
}
err = watchdog_start(wdd);
if (err < 0)
goto out_mod;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
file->private_data = wd_data;
if (!watchdog_hw_running(wdd))
kref_get(&wd_data->kref);
/* dev/watchdog is a virtual (and thus non-seekable) filesystem */
return nonseekable_open(inode, file);
out_mod:
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
module_put(wd_data->wdd->ops->owner);
out_clear:
clear_bit(_WDOG_DEV_OPEN, &wd_data->status);
return err;
}
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
static void watchdog_core_data_release(struct kref *kref)
{
struct watchdog_core_data *wd_data;
wd_data = container_of(kref, struct watchdog_core_data, kref);
kfree(wd_data);
}
/*
* watchdog_release: release the watchdog device.
* @inode: inode of device
* @file: file handle to device
*
* This is the code for when /dev/watchdog gets closed. We will only
* stop the watchdog when we have received the magic char (and nowayout
* was not set), else the watchdog will keep running.
*/
static int watchdog_release(struct inode *inode, struct file *file)
{
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct watchdog_core_data *wd_data = file->private_data;
struct watchdog_device *wdd;
int err = -EBUSY;
bool running;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
mutex_lock(&wd_data->lock);
wdd = wd_data->wdd;
if (!wdd)
goto done;
/*
* We only stop the watchdog if we received the magic character
* or if WDIOF_MAGICCLOSE is not set. If nowayout was set then
* watchdog_stop will fail.
*/
if (!test_bit(WDOG_ACTIVE, &wdd->status))
err = 0;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
else if (test_and_clear_bit(_WDOG_ALLOW_RELEASE, &wd_data->status) ||
!(wdd->info->options & WDIOF_MAGICCLOSE))
err = watchdog_stop(wdd);
/* If the watchdog was not stopped, send a keepalive ping */
if (err < 0) {
pr_crit("watchdog%d: watchdog did not stop!\n", wdd->id);
watchdog_ping(wdd);
}
watchdog_update_worker(wdd);
/* make sure that /dev/watchdog can be re-opened */
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
clear_bit(_WDOG_DEV_OPEN, &wd_data->status);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
done:
running = wdd && watchdog_hw_running(wdd);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
mutex_unlock(&wd_data->lock);
/*
* Allow the owner module to be unloaded again unless the watchdog
* is still running. If the watchdog is still running, it can not
* be stopped, and its driver must not be unloaded.
*/
if (!running) {
module_put(wd_data->cdev.owner);
kref_put(&wd_data->kref, watchdog_core_data_release);
}
return 0;
}
static const struct file_operations watchdog_fops = {
.owner = THIS_MODULE,
.write = watchdog_write,
.unlocked_ioctl = watchdog_ioctl,
.open = watchdog_open,
.release = watchdog_release,
};
static struct miscdevice watchdog_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &watchdog_fops,
};
/*
* watchdog_cdev_register: register watchdog character device
* @wdd: watchdog device
* @devno: character device number
*
* Register a watchdog character device including handling the legacy
* /dev/watchdog node. /dev/watchdog is actually a miscdevice and
* thus we set it up like that.
*/
static int watchdog_cdev_register(struct watchdog_device *wdd, dev_t devno)
{
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct watchdog_core_data *wd_data;
int err;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
wd_data = kzalloc(sizeof(struct watchdog_core_data), GFP_KERNEL);
if (!wd_data)
return -ENOMEM;
kref_init(&wd_data->kref);
mutex_init(&wd_data->lock);
wd_data->wdd = wdd;
wdd->wd_data = wd_data;
if (!watchdog_wq)
return -ENODEV;
INIT_DELAYED_WORK(&wd_data->work, watchdog_ping_work);
if (wdd->id == 0) {
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
old_wd_data = wd_data;
watchdog_miscdev.parent = wdd->parent;
err = misc_register(&watchdog_miscdev);
if (err != 0) {
pr_err("%s: cannot register miscdev on minor=%d (err=%d).\n",
wdd->info->identity, WATCHDOG_MINOR, err);
if (err == -EBUSY)
pr_err("%s: a legacy watchdog module is probably present.\n",
wdd->info->identity);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
old_wd_data = NULL;
kfree(wd_data);
return err;
}
}
/* Fill in the data structures */
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
cdev_init(&wd_data->cdev, &watchdog_fops);
wd_data->cdev.owner = wdd->ops->owner;
/* Add the device */
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
err = cdev_add(&wd_data->cdev, devno, 1);
if (err) {
pr_err("watchdog%d unable to add device %d:%d\n",
wdd->id, MAJOR(watchdog_devt), wdd->id);
if (wdd->id == 0) {
misc_deregister(&watchdog_miscdev);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
old_wd_data = NULL;
kref_put(&wd_data->kref, watchdog_core_data_release);
}
return err;
}
/* Record time of most recent heartbeat as 'just before now'. */
wd_data->last_hw_keepalive = jiffies - 1;
/*
* If the watchdog is running, prevent its driver from being unloaded,
* and schedule an immediate ping.
*/
if (watchdog_hw_running(wdd)) {
if (handle_boot_enabled) {
__module_get(wdd->ops->owner);
kref_get(&wd_data->kref);
queue_delayed_work(watchdog_wq, &wd_data->work, 0);
} else {
pr_info("watchdog%d running and kernel based pre-userspace handler disabled\n",
wdd->id);
}
}
return 0;
}
/*
* watchdog_cdev_unregister: unregister watchdog character device
* @watchdog: watchdog device
*
* Unregister watchdog character device and if needed the legacy
* /dev/watchdog device.
*/
static void watchdog_cdev_unregister(struct watchdog_device *wdd)
{
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
struct watchdog_core_data *wd_data = wdd->wd_data;
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
cdev_del(&wd_data->cdev);
if (wdd->id == 0) {
misc_deregister(&watchdog_miscdev);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
old_wd_data = NULL;
}
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
mutex_lock(&wd_data->lock);
wd_data->wdd = NULL;
wdd->wd_data = NULL;
mutex_unlock(&wd_data->lock);
if (watchdog_active(wdd) &&
test_bit(WDOG_STOP_ON_UNREGISTER, &wdd->status)) {
watchdog_stop(wdd);
}
cancel_delayed_work_sync(&wd_data->work);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
kref_put(&wd_data->kref, watchdog_core_data_release);
}
static struct class watchdog_class = {
.name = "watchdog",
.owner = THIS_MODULE,
.dev_groups = wdt_groups,
};
static int watchdog_reboot_notifier(struct notifier_block *nb,
unsigned long code, void *data)
{
struct watchdog_device *wdd;
wdd = container_of(nb, struct watchdog_device, reboot_nb);
if (code == SYS_DOWN || code == SYS_HALT) {
if (watchdog_active(wdd)) {
int ret;
ret = wdd->ops->stop(wdd);
if (ret)
return NOTIFY_BAD;
}
}
return NOTIFY_DONE;
}
/*
* watchdog_dev_register: register a watchdog device
* @wdd: watchdog device
*
* Register a watchdog device including handling the legacy
* /dev/watchdog node. /dev/watchdog is actually a miscdevice and
* thus we set it up like that.
*/
int watchdog_dev_register(struct watchdog_device *wdd)
{
struct device *dev;
dev_t devno;
int ret;
devno = MKDEV(MAJOR(watchdog_devt), wdd->id);
ret = watchdog_cdev_register(wdd, devno);
if (ret)
return ret;
dev = device_create_with_groups(&watchdog_class, wdd->parent,
devno, wdd, wdd->groups,
"watchdog%d", wdd->id);
if (IS_ERR(dev)) {
watchdog_cdev_unregister(wdd);
return PTR_ERR(dev);
}
ret = watchdog_register_pretimeout(wdd);
if (ret) {
device_destroy(&watchdog_class, devno);
watchdog_cdev_unregister(wdd);
return ret;
}
if (test_bit(WDOG_STOP_ON_REBOOT, &wdd->status)) {
wdd->reboot_nb.notifier_call = watchdog_reboot_notifier;
ret = devm_register_reboot_notifier(dev, &wdd->reboot_nb);
if (ret) {
pr_err("watchdog%d: Cannot register reboot notifier (%d)\n",
wdd->id, ret);
watchdog_dev_unregister(wdd);
}
}
return ret;
}
/*
* watchdog_dev_unregister: unregister a watchdog device
* @watchdog: watchdog device
*
* Unregister watchdog device and if needed the legacy
* /dev/watchdog device.
*/
void watchdog_dev_unregister(struct watchdog_device *wdd)
{
watchdog_unregister_pretimeout(wdd);
device_destroy(&watchdog_class, wdd->wd_data->cdev.dev);
watchdog: Separate and maintain variables based on variable lifetime All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-26 08:01:42 +08:00
watchdog_cdev_unregister(wdd);
}
/*
* watchdog_dev_init: init dev part of watchdog core
*
* Allocate a range of chardev nodes to use for watchdog devices
*/
int __init watchdog_dev_init(void)
{
int err;
watchdog_wq = alloc_workqueue("watchdogd",
WQ_HIGHPRI | WQ_MEM_RECLAIM, 0);
if (!watchdog_wq) {
pr_err("Failed to create watchdog workqueue\n");
return -ENOMEM;
}
err = class_register(&watchdog_class);
if (err < 0) {
pr_err("couldn't register class\n");
goto err_register;
}
err = alloc_chrdev_region(&watchdog_devt, 0, MAX_DOGS, "watchdog");
if (err < 0) {
pr_err("watchdog: unable to allocate char dev region\n");
goto err_alloc;
}
return 0;
err_alloc:
class_unregister(&watchdog_class);
err_register:
destroy_workqueue(watchdog_wq);
return err;
}
/*
* watchdog_dev_exit: exit dev part of watchdog core
*
* Release the range of chardev nodes used for watchdog devices
*/
void __exit watchdog_dev_exit(void)
{
unregister_chrdev_region(watchdog_devt, MAX_DOGS);
class_unregister(&watchdog_class);
destroy_workqueue(watchdog_wq);
}
module_param(handle_boot_enabled, bool, 0444);
MODULE_PARM_DESC(handle_boot_enabled,
"Watchdog core auto-updates boot enabled watchdogs before userspace takes over (default="
__MODULE_STRING(IS_ENABLED(CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED)) ")");