linux/drivers/usb/host/ehci-dbg.c

1085 lines
28 KiB
C
Raw Normal View History

/*
* Copyright (c) 2001-2002 by David Brownell
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* this file is part of ehci-hcd.c */
#ifdef CONFIG_DYNAMIC_DEBUG
/* check the values in the HCSPARAMS register
* (host controller _Structural_ parameters)
* see EHCI spec, Table 2-4 for each value
*/
static void dbg_hcs_params (struct ehci_hcd *ehci, char *label)
{
u32 params = ehci_readl(ehci, &ehci->caps->hcs_params);
ehci_dbg (ehci,
"%s hcs_params 0x%x dbg=%d%s cc=%d pcc=%d%s%s ports=%d\n",
label, params,
HCS_DEBUG_PORT (params),
HCS_INDICATOR (params) ? " ind" : "",
HCS_N_CC (params),
HCS_N_PCC (params),
HCS_PORTROUTED (params) ? "" : " ordered",
HCS_PPC (params) ? "" : " !ppc",
HCS_N_PORTS (params)
);
/* Port routing, per EHCI 0.95 Spec, Section 2.2.5 */
if (HCS_PORTROUTED (params)) {
int i;
char buf [46], tmp [7], byte;
buf[0] = 0;
for (i = 0; i < HCS_N_PORTS (params); i++) {
// FIXME MIPS won't readb() ...
byte = readb (&ehci->caps->portroute[(i>>1)]);
sprintf(tmp, "%d ",
((i & 0x1) ? ((byte)&0xf) : ((byte>>4)&0xf)));
strcat(buf, tmp);
}
ehci_dbg (ehci, "%s portroute %s\n",
label, buf);
}
}
#else
static inline void dbg_hcs_params (struct ehci_hcd *ehci, char *label) {}
#endif
#ifdef CONFIG_DYNAMIC_DEBUG
/* check the values in the HCCPARAMS register
* (host controller _Capability_ parameters)
* see EHCI Spec, Table 2-5 for each value
* */
static void dbg_hcc_params (struct ehci_hcd *ehci, char *label)
{
u32 params = ehci_readl(ehci, &ehci->caps->hcc_params);
if (HCC_ISOC_CACHE (params)) {
ehci_dbg (ehci,
"%s hcc_params %04x caching frame %s%s%s\n",
label, params,
HCC_PGM_FRAMELISTLEN(params) ? "256/512/1024" : "1024",
HCC_CANPARK(params) ? " park" : "",
HCC_64BIT_ADDR(params) ? " 64 bit addr" : "");
} else {
ehci_dbg (ehci,
"%s hcc_params %04x thresh %d uframes %s%s%s%s%s%s%s\n",
label,
params,
HCC_ISOC_THRES(params),
HCC_PGM_FRAMELISTLEN(params) ? "256/512/1024" : "1024",
HCC_CANPARK(params) ? " park" : "",
HCC_64BIT_ADDR(params) ? " 64 bit addr" : "",
HCC_LPM(params) ? " LPM" : "",
HCC_PER_PORT_CHANGE_EVENT(params) ? " ppce" : "",
HCC_HW_PREFETCH(params) ? " hw prefetch" : "",
HCC_32FRAME_PERIODIC_LIST(params) ?
" 32 periodic list" : "");
}
}
#else
static inline void dbg_hcc_params (struct ehci_hcd *ehci, char *label) {}
#endif
#ifdef CONFIG_DYNAMIC_DEBUG
static void __maybe_unused
dbg_qtd (const char *label, struct ehci_hcd *ehci, struct ehci_qtd *qtd)
{
ehci_dbg(ehci, "%s td %p n%08x %08x t%08x p0=%08x\n", label, qtd,
hc32_to_cpup(ehci, &qtd->hw_next),
hc32_to_cpup(ehci, &qtd->hw_alt_next),
hc32_to_cpup(ehci, &qtd->hw_token),
hc32_to_cpup(ehci, &qtd->hw_buf [0]));
if (qtd->hw_buf [1])
ehci_dbg(ehci, " p1=%08x p2=%08x p3=%08x p4=%08x\n",
hc32_to_cpup(ehci, &qtd->hw_buf[1]),
hc32_to_cpup(ehci, &qtd->hw_buf[2]),
hc32_to_cpup(ehci, &qtd->hw_buf[3]),
hc32_to_cpup(ehci, &qtd->hw_buf[4]));
}
static void __maybe_unused
dbg_qh (const char *label, struct ehci_hcd *ehci, struct ehci_qh *qh)
{
struct ehci_qh_hw *hw = qh->hw;
ehci_dbg (ehci, "%s qh %p n%08x info %x %x qtd %x\n", label,
qh, hw->hw_next, hw->hw_info1, hw->hw_info2, hw->hw_current);
dbg_qtd("overlay", ehci, (struct ehci_qtd *) &hw->hw_qtd_next);
}
static void __maybe_unused
dbg_itd (const char *label, struct ehci_hcd *ehci, struct ehci_itd *itd)
{
ehci_dbg (ehci, "%s [%d] itd %p, next %08x, urb %p\n",
label, itd->frame, itd, hc32_to_cpu(ehci, itd->hw_next),
itd->urb);
ehci_dbg (ehci,
" trans: %08x %08x %08x %08x %08x %08x %08x %08x\n",
hc32_to_cpu(ehci, itd->hw_transaction[0]),
hc32_to_cpu(ehci, itd->hw_transaction[1]),
hc32_to_cpu(ehci, itd->hw_transaction[2]),
hc32_to_cpu(ehci, itd->hw_transaction[3]),
hc32_to_cpu(ehci, itd->hw_transaction[4]),
hc32_to_cpu(ehci, itd->hw_transaction[5]),
hc32_to_cpu(ehci, itd->hw_transaction[6]),
hc32_to_cpu(ehci, itd->hw_transaction[7]));
ehci_dbg (ehci,
" buf: %08x %08x %08x %08x %08x %08x %08x\n",
hc32_to_cpu(ehci, itd->hw_bufp[0]),
hc32_to_cpu(ehci, itd->hw_bufp[1]),
hc32_to_cpu(ehci, itd->hw_bufp[2]),
hc32_to_cpu(ehci, itd->hw_bufp[3]),
hc32_to_cpu(ehci, itd->hw_bufp[4]),
hc32_to_cpu(ehci, itd->hw_bufp[5]),
hc32_to_cpu(ehci, itd->hw_bufp[6]));
ehci_dbg (ehci, " index: %d %d %d %d %d %d %d %d\n",
itd->index[0], itd->index[1], itd->index[2],
itd->index[3], itd->index[4], itd->index[5],
itd->index[6], itd->index[7]);
}
static void __maybe_unused
dbg_sitd (const char *label, struct ehci_hcd *ehci, struct ehci_sitd *sitd)
{
ehci_dbg (ehci, "%s [%d] sitd %p, next %08x, urb %p\n",
label, sitd->frame, sitd, hc32_to_cpu(ehci, sitd->hw_next),
sitd->urb);
ehci_dbg (ehci,
" addr %08x sched %04x result %08x buf %08x %08x\n",
hc32_to_cpu(ehci, sitd->hw_fullspeed_ep),
hc32_to_cpu(ehci, sitd->hw_uframe),
hc32_to_cpu(ehci, sitd->hw_results),
hc32_to_cpu(ehci, sitd->hw_buf[0]),
hc32_to_cpu(ehci, sitd->hw_buf[1]));
}
static int __maybe_unused
dbg_status_buf (char *buf, unsigned len, const char *label, u32 status)
{
return scnprintf (buf, len,
"%s%sstatus %04x%s%s%s%s%s%s%s%s%s%s%s",
label, label [0] ? " " : "", status,
(status & STS_PPCE_MASK) ? " PPCE" : "",
(status & STS_ASS) ? " Async" : "",
(status & STS_PSS) ? " Periodic" : "",
(status & STS_RECL) ? " Recl" : "",
(status & STS_HALT) ? " Halt" : "",
(status & STS_IAA) ? " IAA" : "",
(status & STS_FATAL) ? " FATAL" : "",
(status & STS_FLR) ? " FLR" : "",
(status & STS_PCD) ? " PCD" : "",
(status & STS_ERR) ? " ERR" : "",
(status & STS_INT) ? " INT" : ""
);
}
static int __maybe_unused
dbg_intr_buf (char *buf, unsigned len, const char *label, u32 enable)
{
return scnprintf (buf, len,
"%s%sintrenable %02x%s%s%s%s%s%s%s",
label, label [0] ? " " : "", enable,
(enable & STS_PPCE_MASK) ? " PPCE" : "",
(enable & STS_IAA) ? " IAA" : "",
(enable & STS_FATAL) ? " FATAL" : "",
(enable & STS_FLR) ? " FLR" : "",
(enable & STS_PCD) ? " PCD" : "",
(enable & STS_ERR) ? " ERR" : "",
(enable & STS_INT) ? " INT" : ""
);
}
static const char *const fls_strings [] =
{ "1024", "512", "256", "??" };
static int
dbg_command_buf (char *buf, unsigned len, const char *label, u32 command)
{
return scnprintf (buf, len,
"%s%scommand %07x %s%s%s%s%s%s=%d ithresh=%d%s%s%s%s "
"period=%s%s %s",
label, label [0] ? " " : "", command,
(command & CMD_HIRD) ? " HIRD" : "",
(command & CMD_PPCEE) ? " PPCEE" : "",
(command & CMD_FSP) ? " FSP" : "",
(command & CMD_ASPE) ? " ASPE" : "",
(command & CMD_PSPE) ? " PSPE" : "",
(command & CMD_PARK) ? " park" : "(park)",
CMD_PARK_CNT (command),
(command >> 16) & 0x3f,
(command & CMD_LRESET) ? " LReset" : "",
(command & CMD_IAAD) ? " IAAD" : "",
(command & CMD_ASE) ? " Async" : "",
(command & CMD_PSE) ? " Periodic" : "",
fls_strings [(command >> 2) & 0x3],
(command & CMD_RESET) ? " Reset" : "",
(command & CMD_RUN) ? "RUN" : "HALT"
);
}
static int
dbg_port_buf (char *buf, unsigned len, const char *label, int port, u32 status)
{
char *sig;
/* signaling state */
switch (status & (3 << 10)) {
case 0 << 10: sig = "se0"; break;
case 1 << 10: sig = "k"; break; /* low speed */
case 2 << 10: sig = "j"; break;
default: sig = "?"; break;
}
return scnprintf (buf, len,
"%s%sport:%d status %06x %d %s%s%s%s%s%s "
"sig=%s%s%s%s%s%s%s%s%s%s%s",
label, label [0] ? " " : "", port, status,
status>>25,/*device address */
(status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_ACK ?
" ACK" : "",
(status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_NYET ?
" NYET" : "",
(status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_STALL ?
" STALL" : "",
(status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_ERR ?
" ERR" : "",
(status & PORT_POWER) ? " POWER" : "",
(status & PORT_OWNER) ? " OWNER" : "",
sig,
(status & PORT_LPM) ? " LPM" : "",
(status & PORT_RESET) ? " RESET" : "",
(status & PORT_SUSPEND) ? " SUSPEND" : "",
(status & PORT_RESUME) ? " RESUME" : "",
(status & PORT_OCC) ? " OCC" : "",
(status & PORT_OC) ? " OC" : "",
(status & PORT_PEC) ? " PEC" : "",
(status & PORT_PE) ? " PE" : "",
(status & PORT_CSC) ? " CSC" : "",
(status & PORT_CONNECT) ? " CONNECT" : "");
}
#else
static inline void __maybe_unused
dbg_qh (char *label, struct ehci_hcd *ehci, struct ehci_qh *qh)
{}
static inline int __maybe_unused
dbg_status_buf (char *buf, unsigned len, const char *label, u32 status)
{ return 0; }
static inline int __maybe_unused
dbg_command_buf (char *buf, unsigned len, const char *label, u32 command)
{ return 0; }
static inline int __maybe_unused
dbg_intr_buf (char *buf, unsigned len, const char *label, u32 enable)
{ return 0; }
static inline int __maybe_unused
dbg_port_buf (char *buf, unsigned len, const char *label, int port, u32 status)
{ return 0; }
#endif /* CONFIG_DYNAMIC_DEBUG */
/* functions have the "wrong" filename when they're output... */
#define dbg_status(ehci, label, status) { \
char _buf [80]; \
dbg_status_buf (_buf, sizeof _buf, label, status); \
ehci_dbg (ehci, "%s\n", _buf); \
}
#define dbg_cmd(ehci, label, command) { \
char _buf [80]; \
dbg_command_buf (_buf, sizeof _buf, label, command); \
ehci_dbg (ehci, "%s\n", _buf); \
}
#define dbg_port(ehci, label, port, status) { \
char _buf [80]; \
dbg_port_buf (_buf, sizeof _buf, label, port, status); \
ehci_dbg (ehci, "%s\n", _buf); \
}
/*-------------------------------------------------------------------------*/
#ifdef STUB_DEBUG_FILES
static inline void create_debug_files (struct ehci_hcd *bus) { }
static inline void remove_debug_files (struct ehci_hcd *bus) { }
#else
/* troubleshooting help: expose state in debugfs */
static int debug_async_open(struct inode *, struct file *);
USB: EHCI: use a bandwidth-allocation table This patch significantly changes the scheduling code in ehci-hcd. Instead of calculating the current bandwidth utilization by trudging through the schedule and adding up the times used by the existing transfers, we will now maintain a table holding the time used for each of 64 microframes. This will drastically speed up the bandwidth computations. In addition, it eliminates a theoretical bug. An isochronous endpoint may have bandwidth reserved even at times when it has no transfers listed in the schedule. The table will keep track of the reserved bandwidth, whereas adding up entries in the schedule would miss it. As a corollary, we can keep bandwidth reserved for endpoints even when they aren't in active use. Eventually the bandwidth will be reserved when a new alternate setting is installed; for now the endpoint's reservation takes place when its first URB is submitted. A drawback of this approach is that transfers with an interval larger than 64 microframes will have to be charged for bandwidth as though the interval was 64. In practice this shouldn't matter much; transfers with longer intervals tend to be rather short anyway (things like hubs or HID devices). Another minor drawback is that we will keep track of two different period and phase values: the actual ones and the ones used for bandwidth allocation (which are limited to 64). This adds only a small amount of overhead: 3 bytes for each endpoint. The patch also adds a new debugfs file named "bandwidth" to display the information stored in the new table. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-11 23:29:13 +08:00
static int debug_bandwidth_open(struct inode *, struct file *);
static int debug_periodic_open(struct inode *, struct file *);
static int debug_registers_open(struct inode *, struct file *);
static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*);
static int debug_close(struct inode *, struct file *);
static const struct file_operations debug_async_fops = {
.owner = THIS_MODULE,
.open = debug_async_open,
.read = debug_output,
.release = debug_close,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
.llseek = default_llseek,
};
USB: EHCI: use a bandwidth-allocation table This patch significantly changes the scheduling code in ehci-hcd. Instead of calculating the current bandwidth utilization by trudging through the schedule and adding up the times used by the existing transfers, we will now maintain a table holding the time used for each of 64 microframes. This will drastically speed up the bandwidth computations. In addition, it eliminates a theoretical bug. An isochronous endpoint may have bandwidth reserved even at times when it has no transfers listed in the schedule. The table will keep track of the reserved bandwidth, whereas adding up entries in the schedule would miss it. As a corollary, we can keep bandwidth reserved for endpoints even when they aren't in active use. Eventually the bandwidth will be reserved when a new alternate setting is installed; for now the endpoint's reservation takes place when its first URB is submitted. A drawback of this approach is that transfers with an interval larger than 64 microframes will have to be charged for bandwidth as though the interval was 64. In practice this shouldn't matter much; transfers with longer intervals tend to be rather short anyway (things like hubs or HID devices). Another minor drawback is that we will keep track of two different period and phase values: the actual ones and the ones used for bandwidth allocation (which are limited to 64). This adds only a small amount of overhead: 3 bytes for each endpoint. The patch also adds a new debugfs file named "bandwidth" to display the information stored in the new table. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-11 23:29:13 +08:00
static const struct file_operations debug_bandwidth_fops = {
.owner = THIS_MODULE,
.open = debug_bandwidth_open,
.read = debug_output,
.release = debug_close,
.llseek = default_llseek,
};
static const struct file_operations debug_periodic_fops = {
.owner = THIS_MODULE,
.open = debug_periodic_open,
.read = debug_output,
.release = debug_close,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
.llseek = default_llseek,
};
static const struct file_operations debug_registers_fops = {
.owner = THIS_MODULE,
.open = debug_registers_open,
.read = debug_output,
.release = debug_close,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
.llseek = default_llseek,
};
static struct dentry *ehci_debug_root;
struct debug_buffer {
ssize_t (*fill_func)(struct debug_buffer *); /* fill method */
struct usb_bus *bus;
struct mutex mutex; /* protect filling of buffer */
size_t count; /* number of characters filled into buffer */
char *output_buf;
size_t alloc_size;
};
#define speed_char(info1) ({ char tmp; \
switch (info1 & (3 << 12)) { \
case QH_FULL_SPEED: tmp = 'f'; break; \
case QH_LOW_SPEED: tmp = 'l'; break; \
case QH_HIGH_SPEED: tmp = 'h'; break; \
default: tmp = '?'; break; \
} tmp; })
static inline char token_mark(struct ehci_hcd *ehci, __hc32 token)
{
__u32 v = hc32_to_cpu(ehci, token);
if (v & QTD_STS_ACTIVE)
return '*';
if (v & QTD_STS_HALT)
return '-';
if (!IS_SHORT_READ (v))
return ' ';
/* tries to advance through hw_alt_next */
return '/';
}
static void qh_lines (
struct ehci_hcd *ehci,
struct ehci_qh *qh,
char **nextp,
unsigned *sizep
)
{
u32 scratch;
u32 hw_curr;
struct list_head *entry;
struct ehci_qtd *td;
unsigned temp;
unsigned size = *sizep;
char *next = *nextp;
char mark;
__le32 list_end = EHCI_LIST_END(ehci);
struct ehci_qh_hw *hw = qh->hw;
if (hw->hw_qtd_next == list_end) /* NEC does this */
mark = '@';
else
mark = token_mark(ehci, hw->hw_token);
if (mark == '/') { /* qh_alt_next controls qh advance? */
if ((hw->hw_alt_next & QTD_MASK(ehci))
== ehci->async->hw->hw_alt_next)
mark = '#'; /* blocked */
else if (hw->hw_alt_next == list_end)
mark = '.'; /* use hw_qtd_next */
/* else alt_next points to some other qtd */
}
scratch = hc32_to_cpup(ehci, &hw->hw_info1);
hw_curr = (mark == '*') ? hc32_to_cpup(ehci, &hw->hw_current) : 0;
temp = scnprintf (next, size,
"qh/%p dev%d %cs ep%d %08x %08x (%08x%c %s nak%d)",
qh, scratch & 0x007f,
speed_char (scratch),
(scratch >> 8) & 0x000f,
scratch, hc32_to_cpup(ehci, &hw->hw_info2),
hc32_to_cpup(ehci, &hw->hw_token), mark,
(cpu_to_hc32(ehci, QTD_TOGGLE) & hw->hw_token)
? "data1" : "data0",
(hc32_to_cpup(ehci, &hw->hw_alt_next) >> 1) & 0x0f);
size -= temp;
next += temp;
/* hc may be modifying the list as we read it ... */
list_for_each (entry, &qh->qtd_list) {
td = list_entry (entry, struct ehci_qtd, qtd_list);
scratch = hc32_to_cpup(ehci, &td->hw_token);
mark = ' ';
if (hw_curr == td->qtd_dma)
mark = '*';
else if (hw->hw_qtd_next == cpu_to_hc32(ehci, td->qtd_dma))
mark = '+';
else if (QTD_LENGTH (scratch)) {
if (td->hw_alt_next == ehci->async->hw->hw_alt_next)
mark = '#';
else if (td->hw_alt_next != list_end)
mark = '/';
}
temp = snprintf (next, size,
"\n\t%p%c%s len=%d %08x urb %p",
td, mark, ({ char *tmp;
switch ((scratch>>8)&0x03) {
case 0: tmp = "out"; break;
case 1: tmp = "in"; break;
case 2: tmp = "setup"; break;
default: tmp = "?"; break;
} tmp;}),
(scratch >> 16) & 0x7fff,
scratch,
td->urb);
if (size < temp)
temp = size;
size -= temp;
next += temp;
if (temp == size)
goto done;
}
temp = snprintf (next, size, "\n");
if (size < temp)
temp = size;
size -= temp;
next += temp;
done:
*sizep = size;
*nextp = next;
}
static ssize_t fill_async_buffer(struct debug_buffer *buf)
{
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
unsigned long flags;
unsigned temp, size;
char *next;
struct ehci_qh *qh;
hcd = bus_to_hcd(buf->bus);
ehci = hcd_to_ehci (hcd);
next = buf->output_buf;
size = buf->alloc_size;
*next = 0;
/* dumps a snapshot of the async schedule.
* usually empty except for long-term bulk reads, or head.
* one QH per line, and TDs we know about
*/
spin_lock_irqsave (&ehci->lock, flags);
for (qh = ehci->async->qh_next.qh; size > 0 && qh; qh = qh->qh_next.qh)
qh_lines (ehci, qh, &next, &size);
if (!list_empty(&ehci->async_unlink) && size > 0) {
temp = scnprintf(next, size, "\nunlink =\n");
size -= temp;
next += temp;
list_for_each_entry(qh, &ehci->async_unlink, unlink_node) {
if (size <= 0)
break;
qh_lines(ehci, qh, &next, &size);
}
}
spin_unlock_irqrestore (&ehci->lock, flags);
return strlen(buf->output_buf);
}
USB: EHCI: use a bandwidth-allocation table This patch significantly changes the scheduling code in ehci-hcd. Instead of calculating the current bandwidth utilization by trudging through the schedule and adding up the times used by the existing transfers, we will now maintain a table holding the time used for each of 64 microframes. This will drastically speed up the bandwidth computations. In addition, it eliminates a theoretical bug. An isochronous endpoint may have bandwidth reserved even at times when it has no transfers listed in the schedule. The table will keep track of the reserved bandwidth, whereas adding up entries in the schedule would miss it. As a corollary, we can keep bandwidth reserved for endpoints even when they aren't in active use. Eventually the bandwidth will be reserved when a new alternate setting is installed; for now the endpoint's reservation takes place when its first URB is submitted. A drawback of this approach is that transfers with an interval larger than 64 microframes will have to be charged for bandwidth as though the interval was 64. In practice this shouldn't matter much; transfers with longer intervals tend to be rather short anyway (things like hubs or HID devices). Another minor drawback is that we will keep track of two different period and phase values: the actual ones and the ones used for bandwidth allocation (which are limited to 64). This adds only a small amount of overhead: 3 bytes for each endpoint. The patch also adds a new debugfs file named "bandwidth" to display the information stored in the new table. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-11 23:29:13 +08:00
static ssize_t fill_bandwidth_buffer(struct debug_buffer *buf)
{
struct ehci_hcd *ehci;
struct ehci_tt *tt;
struct ehci_per_sched *ps;
USB: EHCI: use a bandwidth-allocation table This patch significantly changes the scheduling code in ehci-hcd. Instead of calculating the current bandwidth utilization by trudging through the schedule and adding up the times used by the existing transfers, we will now maintain a table holding the time used for each of 64 microframes. This will drastically speed up the bandwidth computations. In addition, it eliminates a theoretical bug. An isochronous endpoint may have bandwidth reserved even at times when it has no transfers listed in the schedule. The table will keep track of the reserved bandwidth, whereas adding up entries in the schedule would miss it. As a corollary, we can keep bandwidth reserved for endpoints even when they aren't in active use. Eventually the bandwidth will be reserved when a new alternate setting is installed; for now the endpoint's reservation takes place when its first URB is submitted. A drawback of this approach is that transfers with an interval larger than 64 microframes will have to be charged for bandwidth as though the interval was 64. In practice this shouldn't matter much; transfers with longer intervals tend to be rather short anyway (things like hubs or HID devices). Another minor drawback is that we will keep track of two different period and phase values: the actual ones and the ones used for bandwidth allocation (which are limited to 64). This adds only a small amount of overhead: 3 bytes for each endpoint. The patch also adds a new debugfs file named "bandwidth" to display the information stored in the new table. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-11 23:29:13 +08:00
unsigned temp, size;
char *next;
unsigned i;
u8 *bw;
u16 *bf;
u8 budget[EHCI_BANDWIDTH_SIZE];
USB: EHCI: use a bandwidth-allocation table This patch significantly changes the scheduling code in ehci-hcd. Instead of calculating the current bandwidth utilization by trudging through the schedule and adding up the times used by the existing transfers, we will now maintain a table holding the time used for each of 64 microframes. This will drastically speed up the bandwidth computations. In addition, it eliminates a theoretical bug. An isochronous endpoint may have bandwidth reserved even at times when it has no transfers listed in the schedule. The table will keep track of the reserved bandwidth, whereas adding up entries in the schedule would miss it. As a corollary, we can keep bandwidth reserved for endpoints even when they aren't in active use. Eventually the bandwidth will be reserved when a new alternate setting is installed; for now the endpoint's reservation takes place when its first URB is submitted. A drawback of this approach is that transfers with an interval larger than 64 microframes will have to be charged for bandwidth as though the interval was 64. In practice this shouldn't matter much; transfers with longer intervals tend to be rather short anyway (things like hubs or HID devices). Another minor drawback is that we will keep track of two different period and phase values: the actual ones and the ones used for bandwidth allocation (which are limited to 64). This adds only a small amount of overhead: 3 bytes for each endpoint. The patch also adds a new debugfs file named "bandwidth" to display the information stored in the new table. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-11 23:29:13 +08:00
ehci = hcd_to_ehci(bus_to_hcd(buf->bus));
next = buf->output_buf;
size = buf->alloc_size;
*next = 0;
spin_lock_irq(&ehci->lock);
/* Dump the HS bandwidth table */
temp = scnprintf(next, size,
"HS bandwidth allocation (us per microframe)\n");
size -= temp;
next += temp;
for (i = 0; i < EHCI_BANDWIDTH_SIZE; i += 8) {
bw = &ehci->bandwidth[i];
temp = scnprintf(next, size,
"%2u: %4u%4u%4u%4u%4u%4u%4u%4u\n",
i, bw[0], bw[1], bw[2], bw[3],
bw[4], bw[5], bw[6], bw[7]);
size -= temp;
next += temp;
}
/* Dump all the FS/LS tables */
list_for_each_entry(tt, &ehci->tt_list, tt_list) {
temp = scnprintf(next, size,
"\nTT %s port %d FS/LS bandwidth allocation (us per frame)\n",
dev_name(&tt->usb_tt->hub->dev),
tt->tt_port + !!tt->usb_tt->multi);
size -= temp;
next += temp;
bf = tt->bandwidth;
temp = scnprintf(next, size,
" %5u%5u%5u%5u%5u%5u%5u%5u\n",
bf[0], bf[1], bf[2], bf[3],
bf[4], bf[5], bf[6], bf[7]);
size -= temp;
next += temp;
temp = scnprintf(next, size,
"FS/LS budget (us per microframe)\n");
size -= temp;
next += temp;
compute_tt_budget(budget, tt);
for (i = 0; i < EHCI_BANDWIDTH_SIZE; i += 8) {
bw = &budget[i];
temp = scnprintf(next, size,
"%2u: %4u%4u%4u%4u%4u%4u%4u%4u\n",
i, bw[0], bw[1], bw[2], bw[3],
bw[4], bw[5], bw[6], bw[7]);
size -= temp;
next += temp;
}
list_for_each_entry(ps, &tt->ps_list, ps_list) {
temp = scnprintf(next, size,
"%s ep %02x: %4u @ %2u.%u+%u mask %04x\n",
dev_name(&ps->udev->dev),
ps->ep->desc.bEndpointAddress,
ps->tt_usecs,
ps->bw_phase, ps->phase_uf,
ps->bw_period, ps->cs_mask);
size -= temp;
next += temp;
}
}
USB: EHCI: use a bandwidth-allocation table This patch significantly changes the scheduling code in ehci-hcd. Instead of calculating the current bandwidth utilization by trudging through the schedule and adding up the times used by the existing transfers, we will now maintain a table holding the time used for each of 64 microframes. This will drastically speed up the bandwidth computations. In addition, it eliminates a theoretical bug. An isochronous endpoint may have bandwidth reserved even at times when it has no transfers listed in the schedule. The table will keep track of the reserved bandwidth, whereas adding up entries in the schedule would miss it. As a corollary, we can keep bandwidth reserved for endpoints even when they aren't in active use. Eventually the bandwidth will be reserved when a new alternate setting is installed; for now the endpoint's reservation takes place when its first URB is submitted. A drawback of this approach is that transfers with an interval larger than 64 microframes will have to be charged for bandwidth as though the interval was 64. In practice this shouldn't matter much; transfers with longer intervals tend to be rather short anyway (things like hubs or HID devices). Another minor drawback is that we will keep track of two different period and phase values: the actual ones and the ones used for bandwidth allocation (which are limited to 64). This adds only a small amount of overhead: 3 bytes for each endpoint. The patch also adds a new debugfs file named "bandwidth" to display the information stored in the new table. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-11 23:29:13 +08:00
spin_unlock_irq(&ehci->lock);
return next - buf->output_buf;
}
#define DBG_SCHED_LIMIT 64
static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
{
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
unsigned long flags;
union ehci_shadow p, *seen;
unsigned temp, size, seen_count;
char *next;
unsigned i;
__hc32 tag;
if (!(seen = kmalloc (DBG_SCHED_LIMIT * sizeof *seen, GFP_ATOMIC)))
return 0;
seen_count = 0;
hcd = bus_to_hcd(buf->bus);
ehci = hcd_to_ehci (hcd);
next = buf->output_buf;
size = buf->alloc_size;
temp = scnprintf (next, size, "size = %d\n", ehci->periodic_size);
size -= temp;
next += temp;
/* dump a snapshot of the periodic schedule.
* iso changes, interrupt usually doesn't.
*/
spin_lock_irqsave (&ehci->lock, flags);
for (i = 0; i < ehci->periodic_size; i++) {
p = ehci->pshadow [i];
if (likely (!p.ptr))
continue;
tag = Q_NEXT_TYPE(ehci, ehci->periodic [i]);
temp = scnprintf (next, size, "%4d: ", i);
size -= temp;
next += temp;
do {
struct ehci_qh_hw *hw;
switch (hc32_to_cpu(ehci, tag)) {
case Q_TYPE_QH:
hw = p.qh->hw;
temp = scnprintf (next, size, " qh%d-%04x/%p",
p.qh->ps.period,
hc32_to_cpup(ehci,
&hw->hw_info2)
/* uframe masks */
& (QH_CMASK | QH_SMASK),
p.qh);
size -= temp;
next += temp;
/* don't repeat what follows this qh */
for (temp = 0; temp < seen_count; temp++) {
if (seen [temp].ptr != p.ptr)
continue;
if (p.qh->qh_next.ptr) {
temp = scnprintf (next, size,
" ...");
size -= temp;
next += temp;
}
break;
}
/* show more info the first time around */
if (temp == seen_count) {
u32 scratch = hc32_to_cpup(ehci,
&hw->hw_info1);
struct ehci_qtd *qtd;
char *type = "";
/* count tds, get ep direction */
temp = 0;
list_for_each_entry (qtd,
&p.qh->qtd_list,
qtd_list) {
temp++;
switch (0x03 & (hc32_to_cpu(
ehci,
qtd->hw_token) >> 8)) {
case 0: type = "out"; continue;
case 1: type = "in"; continue;
}
}
temp = scnprintf (next, size,
" (%c%d ep%d%s "
"[%d/%d] q%d p%d)",
speed_char (scratch),
scratch & 0x007f,
(scratch >> 8) & 0x000f, type,
p.qh->ps.usecs,
p.qh->ps.c_usecs,
temp,
0x7ff & (scratch >> 16));
if (seen_count < DBG_SCHED_LIMIT)
seen [seen_count++].qh = p.qh;
} else
temp = 0;
tag = Q_NEXT_TYPE(ehci, hw->hw_next);
p = p.qh->qh_next;
break;
case Q_TYPE_FSTN:
temp = scnprintf (next, size,
" fstn-%8x/%p", p.fstn->hw_prev,
p.fstn);
tag = Q_NEXT_TYPE(ehci, p.fstn->hw_next);
p = p.fstn->fstn_next;
break;
case Q_TYPE_ITD:
temp = scnprintf (next, size,
" itd/%p", p.itd);
tag = Q_NEXT_TYPE(ehci, p.itd->hw_next);
p = p.itd->itd_next;
break;
case Q_TYPE_SITD:
temp = scnprintf (next, size,
" sitd%d-%04x/%p",
p.sitd->stream->ps.period,
hc32_to_cpup(ehci, &p.sitd->hw_uframe)
& 0x0000ffff,
p.sitd);
tag = Q_NEXT_TYPE(ehci, p.sitd->hw_next);
p = p.sitd->sitd_next;
break;
}
size -= temp;
next += temp;
} while (p.ptr);
temp = scnprintf (next, size, "\n");
size -= temp;
next += temp;
}
spin_unlock_irqrestore (&ehci->lock, flags);
kfree (seen);
return buf->alloc_size - size;
}
#undef DBG_SCHED_LIMIT
static const char *rh_state_string(struct ehci_hcd *ehci)
{
switch (ehci->rh_state) {
case EHCI_RH_HALTED:
return "halted";
case EHCI_RH_SUSPENDED:
return "suspended";
case EHCI_RH_RUNNING:
return "running";
case EHCI_RH_STOPPING:
return "stopping";
}
return "?";
}
static ssize_t fill_registers_buffer(struct debug_buffer *buf)
{
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
unsigned long flags;
unsigned temp, size, i;
char *next, scratch [80];
static char fmt [] = "%*s\n";
static char label [] = "";
hcd = bus_to_hcd(buf->bus);
ehci = hcd_to_ehci (hcd);
next = buf->output_buf;
size = buf->alloc_size;
spin_lock_irqsave (&ehci->lock, flags);
if (!HCD_HW_ACCESSIBLE(hcd)) {
size = scnprintf (next, size,
"bus %s, device %s\n"
"%s\n"
"SUSPENDED (no register access)\n",
hcd->self.controller->bus->name,
dev_name(hcd->self.controller),
hcd->product_desc);
goto done;
}
/* Capability Registers */
i = HC_VERSION(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
temp = scnprintf (next, size,
"bus %s, device %s\n"
"%s\n"
"EHCI %x.%02x, rh state %s\n",
hcd->self.controller->bus->name,
dev_name(hcd->self.controller),
hcd->product_desc,
i >> 8, i & 0x0ff, rh_state_string(ehci));
size -= temp;
next += temp;
#ifdef CONFIG_PCI
/* EHCI 0.96 and later may have "extended capabilities" */
if (dev_is_pci(hcd->self.controller)) {
struct pci_dev *pdev;
u32 offset, cap, cap2;
unsigned count = 256/4;
pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
offset = HCC_EXT_CAPS(ehci_readl(ehci,
&ehci->caps->hcc_params));
while (offset && count--) {
pci_read_config_dword (pdev, offset, &cap);
switch (cap & 0xff) {
case 1:
temp = scnprintf (next, size,
"ownership %08x%s%s\n", cap,
(cap & (1 << 24)) ? " linux" : "",
(cap & (1 << 16)) ? " firmware" : "");
size -= temp;
next += temp;
offset += 4;
pci_read_config_dword (pdev, offset, &cap2);
temp = scnprintf (next, size,
"SMI sts/enable 0x%08x\n", cap2);
size -= temp;
next += temp;
break;
case 0: /* illegal reserved capability */
cap = 0;
/* FALLTHROUGH */
default: /* unknown */
break;
}
temp = (cap >> 8) & 0xff;
}
}
#endif
// FIXME interpret both types of params
i = ehci_readl(ehci, &ehci->caps->hcs_params);
temp = scnprintf (next, size, "structural params 0x%08x\n", i);
size -= temp;
next += temp;
i = ehci_readl(ehci, &ehci->caps->hcc_params);
temp = scnprintf (next, size, "capability params 0x%08x\n", i);
size -= temp;
next += temp;
/* Operational Registers */
temp = dbg_status_buf (scratch, sizeof scratch, label,
ehci_readl(ehci, &ehci->regs->status));
temp = scnprintf (next, size, fmt, temp, scratch);
size -= temp;
next += temp;
temp = dbg_command_buf (scratch, sizeof scratch, label,
ehci_readl(ehci, &ehci->regs->command));
temp = scnprintf (next, size, fmt, temp, scratch);
size -= temp;
next += temp;
temp = dbg_intr_buf (scratch, sizeof scratch, label,
ehci_readl(ehci, &ehci->regs->intr_enable));
temp = scnprintf (next, size, fmt, temp, scratch);
size -= temp;
next += temp;
temp = scnprintf (next, size, "uframe %04x\n",
ehci_read_frame_index(ehci));
size -= temp;
next += temp;
for (i = 1; i <= HCS_N_PORTS (ehci->hcs_params); i++) {
temp = dbg_port_buf (scratch, sizeof scratch, label, i,
ehci_readl(ehci,
&ehci->regs->port_status[i - 1]));
temp = scnprintf (next, size, fmt, temp, scratch);
size -= temp;
next += temp;
if (i == HCS_DEBUG_PORT(ehci->hcs_params) && ehci->debug) {
temp = scnprintf (next, size,
" debug control %08x\n",
ehci_readl(ehci,
&ehci->debug->control));
size -= temp;
next += temp;
}
}
if (!list_empty(&ehci->async_unlink)) {
temp = scnprintf(next, size, "async unlink qh %p\n",
list_first_entry(&ehci->async_unlink,
struct ehci_qh, unlink_node));
size -= temp;
next += temp;
}
#ifdef EHCI_STATS
temp = scnprintf (next, size,
"irq normal %ld err %ld iaa %ld (lost %ld)\n",
ehci->stats.normal, ehci->stats.error, ehci->stats.iaa,
ehci->stats.lost_iaa);
size -= temp;
next += temp;
temp = scnprintf (next, size, "complete %ld unlink %ld\n",
ehci->stats.complete, ehci->stats.unlink);
size -= temp;
next += temp;
#endif
done:
spin_unlock_irqrestore (&ehci->lock, flags);
return buf->alloc_size - size;
}
static struct debug_buffer *alloc_buffer(struct usb_bus *bus,
ssize_t (*fill_func)(struct debug_buffer *))
{
struct debug_buffer *buf;
buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
if (buf) {
buf->bus = bus;
buf->fill_func = fill_func;
mutex_init(&buf->mutex);
buf->alloc_size = PAGE_SIZE;
}
return buf;
}
static int fill_buffer(struct debug_buffer *buf)
{
int ret = 0;
if (!buf->output_buf)
buf->output_buf = vmalloc(buf->alloc_size);
if (!buf->output_buf) {
ret = -ENOMEM;
goto out;
}
ret = buf->fill_func(buf);
if (ret >= 0) {
buf->count = ret;
ret = 0;
}
out:
return ret;
}
static ssize_t debug_output(struct file *file, char __user *user_buf,
size_t len, loff_t *offset)
{
struct debug_buffer *buf = file->private_data;
int ret = 0;
mutex_lock(&buf->mutex);
if (buf->count == 0) {
ret = fill_buffer(buf);
if (ret != 0) {
mutex_unlock(&buf->mutex);
goto out;
}
}
mutex_unlock(&buf->mutex);
ret = simple_read_from_buffer(user_buf, len, offset,
buf->output_buf, buf->count);
out:
return ret;
}
static int debug_close(struct inode *inode, struct file *file)
{
struct debug_buffer *buf = file->private_data;
if (buf) {
vfree(buf->output_buf);
kfree(buf);
}
return 0;
}
USB: EHCI: use a bandwidth-allocation table This patch significantly changes the scheduling code in ehci-hcd. Instead of calculating the current bandwidth utilization by trudging through the schedule and adding up the times used by the existing transfers, we will now maintain a table holding the time used for each of 64 microframes. This will drastically speed up the bandwidth computations. In addition, it eliminates a theoretical bug. An isochronous endpoint may have bandwidth reserved even at times when it has no transfers listed in the schedule. The table will keep track of the reserved bandwidth, whereas adding up entries in the schedule would miss it. As a corollary, we can keep bandwidth reserved for endpoints even when they aren't in active use. Eventually the bandwidth will be reserved when a new alternate setting is installed; for now the endpoint's reservation takes place when its first URB is submitted. A drawback of this approach is that transfers with an interval larger than 64 microframes will have to be charged for bandwidth as though the interval was 64. In practice this shouldn't matter much; transfers with longer intervals tend to be rather short anyway (things like hubs or HID devices). Another minor drawback is that we will keep track of two different period and phase values: the actual ones and the ones used for bandwidth allocation (which are limited to 64). This adds only a small amount of overhead: 3 bytes for each endpoint. The patch also adds a new debugfs file named "bandwidth" to display the information stored in the new table. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-11 23:29:13 +08:00
static int debug_async_open(struct inode *inode, struct file *file)
{
file->private_data = alloc_buffer(inode->i_private, fill_async_buffer);
return file->private_data ? 0 : -ENOMEM;
}
USB: EHCI: use a bandwidth-allocation table This patch significantly changes the scheduling code in ehci-hcd. Instead of calculating the current bandwidth utilization by trudging through the schedule and adding up the times used by the existing transfers, we will now maintain a table holding the time used for each of 64 microframes. This will drastically speed up the bandwidth computations. In addition, it eliminates a theoretical bug. An isochronous endpoint may have bandwidth reserved even at times when it has no transfers listed in the schedule. The table will keep track of the reserved bandwidth, whereas adding up entries in the schedule would miss it. As a corollary, we can keep bandwidth reserved for endpoints even when they aren't in active use. Eventually the bandwidth will be reserved when a new alternate setting is installed; for now the endpoint's reservation takes place when its first URB is submitted. A drawback of this approach is that transfers with an interval larger than 64 microframes will have to be charged for bandwidth as though the interval was 64. In practice this shouldn't matter much; transfers with longer intervals tend to be rather short anyway (things like hubs or HID devices). Another minor drawback is that we will keep track of two different period and phase values: the actual ones and the ones used for bandwidth allocation (which are limited to 64). This adds only a small amount of overhead: 3 bytes for each endpoint. The patch also adds a new debugfs file named "bandwidth" to display the information stored in the new table. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-11 23:29:13 +08:00
static int debug_bandwidth_open(struct inode *inode, struct file *file)
{
file->private_data = alloc_buffer(inode->i_private,
fill_bandwidth_buffer);
return file->private_data ? 0 : -ENOMEM;
}
static int debug_periodic_open(struct inode *inode, struct file *file)
{
struct debug_buffer *buf;
buf = alloc_buffer(inode->i_private, fill_periodic_buffer);
if (!buf)
return -ENOMEM;
buf->alloc_size = (sizeof(void *) == 4 ? 6 : 8)*PAGE_SIZE;
file->private_data = buf;
return 0;
}
static int debug_registers_open(struct inode *inode, struct file *file)
{
file->private_data = alloc_buffer(inode->i_private,
fill_registers_buffer);
return file->private_data ? 0 : -ENOMEM;
}
static inline void create_debug_files (struct ehci_hcd *ehci)
{
struct usb_bus *bus = &ehci_to_hcd(ehci)->self;
ehci->debug_dir = debugfs_create_dir(bus->bus_name, ehci_debug_root);
if (!ehci->debug_dir)
return;
if (!debugfs_create_file("async", S_IRUGO, ehci->debug_dir, bus,
&debug_async_fops))
goto file_error;
USB: EHCI: use a bandwidth-allocation table This patch significantly changes the scheduling code in ehci-hcd. Instead of calculating the current bandwidth utilization by trudging through the schedule and adding up the times used by the existing transfers, we will now maintain a table holding the time used for each of 64 microframes. This will drastically speed up the bandwidth computations. In addition, it eliminates a theoretical bug. An isochronous endpoint may have bandwidth reserved even at times when it has no transfers listed in the schedule. The table will keep track of the reserved bandwidth, whereas adding up entries in the schedule would miss it. As a corollary, we can keep bandwidth reserved for endpoints even when they aren't in active use. Eventually the bandwidth will be reserved when a new alternate setting is installed; for now the endpoint's reservation takes place when its first URB is submitted. A drawback of this approach is that transfers with an interval larger than 64 microframes will have to be charged for bandwidth as though the interval was 64. In practice this shouldn't matter much; transfers with longer intervals tend to be rather short anyway (things like hubs or HID devices). Another minor drawback is that we will keep track of two different period and phase values: the actual ones and the ones used for bandwidth allocation (which are limited to 64). This adds only a small amount of overhead: 3 bytes for each endpoint. The patch also adds a new debugfs file named "bandwidth" to display the information stored in the new table. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-11 23:29:13 +08:00
if (!debugfs_create_file("bandwidth", S_IRUGO, ehci->debug_dir, bus,
&debug_bandwidth_fops))
goto file_error;
if (!debugfs_create_file("periodic", S_IRUGO, ehci->debug_dir, bus,
&debug_periodic_fops))
goto file_error;
if (!debugfs_create_file("registers", S_IRUGO, ehci->debug_dir, bus,
&debug_registers_fops))
goto file_error;
return;
file_error:
debugfs_remove_recursive(ehci->debug_dir);
}
static inline void remove_debug_files (struct ehci_hcd *ehci)
{
debugfs_remove_recursive(ehci->debug_dir);
}
#endif /* STUB_DEBUG_FILES */