linux/drivers/media/platform/vsp1/vsp1_entity.c

238 lines
6.4 KiB
C
Raw Normal View History

/*
* vsp1_entity.c -- R-Car VSP1 Base Entity
*
* Copyright (C) 2013-2014 Renesas Electronics Corporation
*
* Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/device.h>
#include <linux/gfp.h>
#include <media/media-entity.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-subdev.h>
#include "vsp1.h"
#include "vsp1_entity.h"
bool vsp1_entity_is_streaming(struct vsp1_entity *entity)
{
unsigned long flags;
bool streaming;
spin_lock_irqsave(&entity->lock, flags);
streaming = entity->streaming;
spin_unlock_irqrestore(&entity->lock, flags);
return streaming;
}
int vsp1_entity_set_streaming(struct vsp1_entity *entity, bool streaming)
{
unsigned long flags;
int ret;
spin_lock_irqsave(&entity->lock, flags);
entity->streaming = streaming;
spin_unlock_irqrestore(&entity->lock, flags);
if (!streaming)
return 0;
if (!entity->vsp1->pdata.uapi || !entity->subdev.ctrl_handler)
return 0;
ret = v4l2_ctrl_handler_setup(entity->subdev.ctrl_handler);
if (ret < 0) {
spin_lock_irqsave(&entity->lock, flags);
entity->streaming = false;
spin_unlock_irqrestore(&entity->lock, flags);
}
return ret;
}
void vsp1_entity_route_setup(struct vsp1_entity *source)
{
struct vsp1_entity *sink;
if (source->route->reg == 0)
return;
sink = container_of(source->sink, struct vsp1_entity, subdev.entity);
vsp1_write(source->vsp1, source->route->reg,
sink->route->inputs[source->sink_pad]);
}
/* -----------------------------------------------------------------------------
* V4L2 Subdevice Operations
*/
struct v4l2_mbus_framefmt *
vsp1_entity_get_pad_format(struct vsp1_entity *entity,
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
struct v4l2_subdev_pad_config *cfg,
unsigned int pad, u32 which)
{
switch (which) {
case V4L2_SUBDEV_FORMAT_TRY:
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
return v4l2_subdev_get_try_format(&entity->subdev, cfg, pad);
case V4L2_SUBDEV_FORMAT_ACTIVE:
return &entity->formats[pad];
default:
return NULL;
}
}
/*
* vsp1_entity_init_formats - Initialize formats on all pads
* @subdev: V4L2 subdevice
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
* @cfg: V4L2 subdev pad configuration
*
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
* Initialize all pad formats with default values. If cfg is not NULL, try
* formats are initialized on the file handle. Otherwise active formats are
* initialized on the device.
*/
void vsp1_entity_init_formats(struct v4l2_subdev *subdev,
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
struct v4l2_subdev_pad_config *cfg)
{
struct v4l2_subdev_format format;
unsigned int pad;
for (pad = 0; pad < subdev->entity.num_pads - 1; ++pad) {
memset(&format, 0, sizeof(format));
format.pad = pad;
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
format.which = cfg ? V4L2_SUBDEV_FORMAT_TRY
: V4L2_SUBDEV_FORMAT_ACTIVE;
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
v4l2_subdev_call(subdev, pad, set_fmt, cfg, &format);
}
}
static int vsp1_entity_open(struct v4l2_subdev *subdev,
struct v4l2_subdev_fh *fh)
{
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 17:47:54 +08:00
vsp1_entity_init_formats(subdev, fh->pad);
return 0;
}
const struct v4l2_subdev_internal_ops vsp1_subdev_internal_ops = {
.open = vsp1_entity_open,
};
/* -----------------------------------------------------------------------------
* Media Operations
*/
int vsp1_entity_link_setup(struct media_entity *entity,
const struct media_pad *local,
const struct media_pad *remote, u32 flags)
{
struct vsp1_entity *source;
if (!(local->flags & MEDIA_PAD_FL_SOURCE))
return 0;
source = container_of(local->entity, struct vsp1_entity, subdev.entity);
if (!source->route)
return 0;
if (flags & MEDIA_LNK_FL_ENABLED) {
if (source->sink)
return -EBUSY;
source->sink = remote->entity;
source->sink_pad = remote->index;
} else {
source->sink = NULL;
source->sink_pad = 0;
}
return 0;
}
/* -----------------------------------------------------------------------------
* Initialization
*/
static const struct vsp1_route vsp1_routes[] = {
{ VSP1_ENTITY_BRU, 0, VI6_DPR_BRU_ROUTE,
{ VI6_DPR_NODE_BRU_IN(0), VI6_DPR_NODE_BRU_IN(1),
VI6_DPR_NODE_BRU_IN(2), VI6_DPR_NODE_BRU_IN(3), } },
{ VSP1_ENTITY_HSI, 0, VI6_DPR_HSI_ROUTE, { VI6_DPR_NODE_HSI, } },
{ VSP1_ENTITY_HST, 0, VI6_DPR_HST_ROUTE, { VI6_DPR_NODE_HST, } },
{ VSP1_ENTITY_LIF, 0, 0, { VI6_DPR_NODE_LIF, } },
{ VSP1_ENTITY_LUT, 0, VI6_DPR_LUT_ROUTE, { VI6_DPR_NODE_LUT, } },
{ VSP1_ENTITY_RPF, 0, VI6_DPR_RPF_ROUTE(0), { VI6_DPR_NODE_RPF(0), } },
{ VSP1_ENTITY_RPF, 1, VI6_DPR_RPF_ROUTE(1), { VI6_DPR_NODE_RPF(1), } },
{ VSP1_ENTITY_RPF, 2, VI6_DPR_RPF_ROUTE(2), { VI6_DPR_NODE_RPF(2), } },
{ VSP1_ENTITY_RPF, 3, VI6_DPR_RPF_ROUTE(3), { VI6_DPR_NODE_RPF(3), } },
{ VSP1_ENTITY_RPF, 4, VI6_DPR_RPF_ROUTE(4), { VI6_DPR_NODE_RPF(4), } },
{ VSP1_ENTITY_SRU, 0, VI6_DPR_SRU_ROUTE, { VI6_DPR_NODE_SRU, } },
{ VSP1_ENTITY_UDS, 0, VI6_DPR_UDS_ROUTE(0), { VI6_DPR_NODE_UDS(0), } },
{ VSP1_ENTITY_UDS, 1, VI6_DPR_UDS_ROUTE(1), { VI6_DPR_NODE_UDS(1), } },
{ VSP1_ENTITY_UDS, 2, VI6_DPR_UDS_ROUTE(2), { VI6_DPR_NODE_UDS(2), } },
{ VSP1_ENTITY_WPF, 0, 0, { VI6_DPR_NODE_WPF(0), } },
{ VSP1_ENTITY_WPF, 1, 0, { VI6_DPR_NODE_WPF(1), } },
{ VSP1_ENTITY_WPF, 2, 0, { VI6_DPR_NODE_WPF(2), } },
{ VSP1_ENTITY_WPF, 3, 0, { VI6_DPR_NODE_WPF(3), } },
};
int vsp1_entity_init(struct vsp1_device *vsp1, struct vsp1_entity *entity,
unsigned int num_pads)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(vsp1_routes); ++i) {
if (vsp1_routes[i].type == entity->type &&
vsp1_routes[i].index == entity->index) {
entity->route = &vsp1_routes[i];
break;
}
}
if (i == ARRAY_SIZE(vsp1_routes))
return -EINVAL;
spin_lock_init(&entity->lock);
entity->vsp1 = vsp1;
entity->source_pad = num_pads - 1;
/* Allocate formats and pads. */
entity->formats = devm_kzalloc(vsp1->dev,
num_pads * sizeof(*entity->formats),
GFP_KERNEL);
if (entity->formats == NULL)
return -ENOMEM;
entity->pads = devm_kzalloc(vsp1->dev, num_pads * sizeof(*entity->pads),
GFP_KERNEL);
if (entity->pads == NULL)
return -ENOMEM;
/* Initialize pads. */
for (i = 0; i < num_pads - 1; ++i)
entity->pads[i].flags = MEDIA_PAD_FL_SINK;
entity->pads[num_pads - 1].flags = MEDIA_PAD_FL_SOURCE;
/* Initialize the media entity. */
return media_entity_pads_init(&entity->subdev.entity, num_pads,
entity->pads);
}
void vsp1_entity_destroy(struct vsp1_entity *entity)
{
if (entity->subdev.ctrl_handler)
v4l2_ctrl_handler_free(entity->subdev.ctrl_handler);
media_entity_cleanup(&entity->subdev.entity);
}