linux/drivers/tty/ipwireless/tty.c

636 lines
14 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* IPWireless 3G PCMCIA Network Driver
*
* Original code
* by Stephen Blackheath <stephen@blacksapphire.com>,
* Ben Martel <benm@symmetric.co.nz>
*
* Copyrighted as follows:
* Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
*
* Various driver changes and rewrites, port to new kernels
* Copyright (C) 2006-2007 Jiri Kosina
*
* Misc code cleanups and updates
* Copyright (C) 2007 David Sterba
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/ppp_defs.h>
#include <linux/if.h>
#include <linux/ppp-ioctl.h>
#include <linux/sched.h>
#include <linux/serial.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/uaccess.h>
#include "tty.h"
#include "network.h"
#include "hardware.h"
#include "main.h"
#define IPWIRELESS_PCMCIA_START (0)
#define IPWIRELESS_PCMCIA_MINORS (24)
#define IPWIRELESS_PCMCIA_MINOR_RANGE (8)
#define TTYTYPE_MODEM (0)
#define TTYTYPE_MONITOR (1)
#define TTYTYPE_RAS_RAW (2)
struct ipw_tty {
struct tty_port port;
int index;
struct ipw_hardware *hardware;
unsigned int channel_idx;
unsigned int secondary_channel_idx;
int tty_type;
struct ipw_network *network;
unsigned int control_lines;
struct mutex ipw_tty_mutex;
int tx_bytes_queued;
int closing;
};
static struct ipw_tty *ttys[IPWIRELESS_PCMCIA_MINORS];
static struct tty_driver *ipw_tty_driver;
static char *tty_type_name(int tty_type)
{
static char *channel_names[] = {
"modem",
"monitor",
"RAS-raw"
};
return channel_names[tty_type];
}
static struct ipw_tty *get_tty(int index)
{
/*
* The 'ras_raw' channel is only available when 'loopback' mode
* is enabled.
* Number of minor starts with 16 (_RANGE * _RAS_RAW).
*/
if (!ipwireless_loopback && index >=
IPWIRELESS_PCMCIA_MINOR_RANGE * TTYTYPE_RAS_RAW)
return NULL;
return ttys[index];
}
static int ipw_open(struct tty_struct *linux_tty, struct file *filp)
{
struct ipw_tty *tty = get_tty(linux_tty->index);
if (!tty)
return -ENODEV;
mutex_lock(&tty->ipw_tty_mutex);
if (tty->port.count == 0)
tty->tx_bytes_queued = 0;
tty->port.count++;
tty->port.tty = linux_tty;
linux_tty->driver_data = tty;
tty->port.low_latency = 1;
if (tty->tty_type == TTYTYPE_MODEM)
ipwireless_ppp_open(tty->network);
mutex_unlock(&tty->ipw_tty_mutex);
return 0;
}
static void do_ipw_close(struct ipw_tty *tty)
{
tty->port.count--;
if (tty->port.count == 0) {
struct tty_struct *linux_tty = tty->port.tty;
if (linux_tty != NULL) {
tty->port.tty = NULL;
linux_tty->driver_data = NULL;
if (tty->tty_type == TTYTYPE_MODEM)
ipwireless_ppp_close(tty->network);
}
}
}
static void ipw_hangup(struct tty_struct *linux_tty)
{
struct ipw_tty *tty = linux_tty->driver_data;
if (!tty)
return;
mutex_lock(&tty->ipw_tty_mutex);
if (tty->port.count == 0) {
mutex_unlock(&tty->ipw_tty_mutex);
return;
}
do_ipw_close(tty);
mutex_unlock(&tty->ipw_tty_mutex);
}
static void ipw_close(struct tty_struct *linux_tty, struct file *filp)
{
ipw_hangup(linux_tty);
}
/* Take data received from hardware, and send it out the tty */
void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data,
unsigned int length)
{
int work = 0;
mutex_lock(&tty->ipw_tty_mutex);
if (!tty->port.count) {
mutex_unlock(&tty->ipw_tty_mutex);
return;
}
mutex_unlock(&tty->ipw_tty_mutex);
work = tty_insert_flip_string(&tty->port, data, length);
if (work != length)
printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
": %d chars not inserted to flip buffer!\n",
length - work);
if (work)
tty_flip_buffer_push(&tty->port);
}
static void ipw_write_packet_sent_callback(void *callback_data,
unsigned int packet_length)
{
struct ipw_tty *tty = callback_data;
/*
* Packet has been sent, so we subtract the number of bytes from our
* tally of outstanding TX bytes.
*/
tty->tx_bytes_queued -= packet_length;
}
static int ipw_write(struct tty_struct *linux_tty,
const unsigned char *buf, int count)
{
struct ipw_tty *tty = linux_tty->driver_data;
int room, ret;
if (!tty)
return -ENODEV;
mutex_lock(&tty->ipw_tty_mutex);
if (!tty->port.count) {
mutex_unlock(&tty->ipw_tty_mutex);
return -EINVAL;
}
room = IPWIRELESS_TX_QUEUE_SIZE - tty->tx_bytes_queued;
if (room < 0)
room = 0;
/* Don't allow caller to write any more than we have room for */
if (count > room)
count = room;
if (count == 0) {
mutex_unlock(&tty->ipw_tty_mutex);
return 0;
}
ret = ipwireless_send_packet(tty->hardware, IPW_CHANNEL_RAS,
buf, count,
ipw_write_packet_sent_callback, tty);
if (ret == -1) {
mutex_unlock(&tty->ipw_tty_mutex);
return 0;
}
tty->tx_bytes_queued += count;
mutex_unlock(&tty->ipw_tty_mutex);
return count;
}
static int ipw_write_room(struct tty_struct *linux_tty)
{
struct ipw_tty *tty = linux_tty->driver_data;
int room;
/* FIXME: Exactly how is the tty object locked here .. */
if (!tty)
return -ENODEV;
if (!tty->port.count)
return -EINVAL;
room = IPWIRELESS_TX_QUEUE_SIZE - tty->tx_bytes_queued;
if (room < 0)
room = 0;
return room;
}
static int ipwireless_get_serial_info(struct tty_struct *linux_tty,
struct serial_struct *ss)
{
struct ipw_tty *tty = linux_tty->driver_data;
if (!tty)
return -ENODEV;
if (!tty->port.count)
return -EINVAL;
ss->type = PORT_UNKNOWN;
ss->line = tty->index;
ss->baud_base = 115200;
return 0;
}
static int ipwireless_set_serial_info(struct tty_struct *linux_tty,
struct serial_struct *ss)
{
return 0; /* Keeps the PCMCIA scripts happy. */
}
static int ipw_chars_in_buffer(struct tty_struct *linux_tty)
{
struct ipw_tty *tty = linux_tty->driver_data;
if (!tty)
return 0;
if (!tty->port.count)
return 0;
return tty->tx_bytes_queued;
}
static int get_control_lines(struct ipw_tty *tty)
{
unsigned int my = tty->control_lines;
unsigned int out = 0;
if (my & IPW_CONTROL_LINE_RTS)
out |= TIOCM_RTS;
if (my & IPW_CONTROL_LINE_DTR)
out |= TIOCM_DTR;
if (my & IPW_CONTROL_LINE_CTS)
out |= TIOCM_CTS;
if (my & IPW_CONTROL_LINE_DSR)
out |= TIOCM_DSR;
if (my & IPW_CONTROL_LINE_DCD)
out |= TIOCM_CD;
return out;
}
static int set_control_lines(struct ipw_tty *tty, unsigned int set,
unsigned int clear)
{
int ret;
if (set & TIOCM_RTS) {
ret = ipwireless_set_RTS(tty->hardware, tty->channel_idx, 1);
if (ret)
return ret;
if (tty->secondary_channel_idx != -1) {
ret = ipwireless_set_RTS(tty->hardware,
tty->secondary_channel_idx, 1);
if (ret)
return ret;
}
}
if (set & TIOCM_DTR) {
ret = ipwireless_set_DTR(tty->hardware, tty->channel_idx, 1);
if (ret)
return ret;
if (tty->secondary_channel_idx != -1) {
ret = ipwireless_set_DTR(tty->hardware,
tty->secondary_channel_idx, 1);
if (ret)
return ret;
}
}
if (clear & TIOCM_RTS) {
ret = ipwireless_set_RTS(tty->hardware, tty->channel_idx, 0);
if (tty->secondary_channel_idx != -1) {
ret = ipwireless_set_RTS(tty->hardware,
tty->secondary_channel_idx, 0);
if (ret)
return ret;
}
}
if (clear & TIOCM_DTR) {
ret = ipwireless_set_DTR(tty->hardware, tty->channel_idx, 0);
if (tty->secondary_channel_idx != -1) {
ret = ipwireless_set_DTR(tty->hardware,
tty->secondary_channel_idx, 0);
if (ret)
return ret;
}
}
return 0;
}
static int ipw_tiocmget(struct tty_struct *linux_tty)
{
struct ipw_tty *tty = linux_tty->driver_data;
/* FIXME: Exactly how is the tty object locked here .. */
if (!tty)
return -ENODEV;
if (!tty->port.count)
return -EINVAL;
return get_control_lines(tty);
}
static int
ipw_tiocmset(struct tty_struct *linux_tty,
unsigned int set, unsigned int clear)
{
struct ipw_tty *tty = linux_tty->driver_data;
/* FIXME: Exactly how is the tty object locked here .. */
if (!tty)
return -ENODEV;
if (!tty->port.count)
return -EINVAL;
return set_control_lines(tty, set, clear);
}
static int ipw_ioctl(struct tty_struct *linux_tty,
unsigned int cmd, unsigned long arg)
{
struct ipw_tty *tty = linux_tty->driver_data;
if (!tty)
return -ENODEV;
if (!tty->port.count)
return -EINVAL;
/* FIXME: Exactly how is the tty object locked here .. */
if (tty->tty_type == TTYTYPE_MODEM) {
switch (cmd) {
case PPPIOCGCHAN:
{
int chan = ipwireless_ppp_channel_index(
tty->network);
if (chan < 0)
return -ENODEV;
if (put_user(chan, (int __user *) arg))
return -EFAULT;
}
return 0;
case PPPIOCGUNIT:
{
int unit = ipwireless_ppp_unit_number(
tty->network);
if (unit < 0)
return -ENODEV;
if (put_user(unit, (int __user *) arg))
return -EFAULT;
}
return 0;
case FIONREAD:
{
int val = 0;
if (put_user(val, (int __user *) arg))
return -EFAULT;
}
return 0;
case TCFLSH:
return tty_perform_flush(linux_tty, arg);
}
}
return -ENOIOCTLCMD;
}
static int add_tty(int j,
struct ipw_hardware *hardware,
struct ipw_network *network, int channel_idx,
int secondary_channel_idx, int tty_type)
{
ttys[j] = kzalloc(sizeof(struct ipw_tty), GFP_KERNEL);
if (!ttys[j])
return -ENOMEM;
ttys[j]->index = j;
ttys[j]->hardware = hardware;
ttys[j]->channel_idx = channel_idx;
ttys[j]->secondary_channel_idx = secondary_channel_idx;
ttys[j]->network = network;
ttys[j]->tty_type = tty_type;
mutex_init(&ttys[j]->ipw_tty_mutex);
tty_port_init(&ttys[j]->port);
tty_port_register_device(&ttys[j]->port, ipw_tty_driver, j, NULL);
ipwireless_associate_network_tty(network, channel_idx, ttys[j]);
if (secondary_channel_idx != -1)
ipwireless_associate_network_tty(network,
secondary_channel_idx,
ttys[j]);
/* check if we provide raw device (if loopback is enabled) */
if (get_tty(j))
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
": registering %s device ttyIPWp%d\n",
tty_type_name(tty_type), j);
return 0;
}
struct ipw_tty *ipwireless_tty_create(struct ipw_hardware *hardware,
struct ipw_network *network)
{
int i, j;
for (i = 0; i < IPWIRELESS_PCMCIA_MINOR_RANGE; i++) {
int allfree = 1;
for (j = i; j < IPWIRELESS_PCMCIA_MINORS;
j += IPWIRELESS_PCMCIA_MINOR_RANGE)
if (ttys[j] != NULL) {
allfree = 0;
break;
}
if (allfree) {
j = i;
if (add_tty(j, hardware, network,
IPW_CHANNEL_DIALLER, IPW_CHANNEL_RAS,
TTYTYPE_MODEM))
return NULL;
j += IPWIRELESS_PCMCIA_MINOR_RANGE;
if (add_tty(j, hardware, network,
IPW_CHANNEL_DIALLER, -1,
TTYTYPE_MONITOR))
return NULL;
j += IPWIRELESS_PCMCIA_MINOR_RANGE;
if (add_tty(j, hardware, network,
IPW_CHANNEL_RAS, -1,
TTYTYPE_RAS_RAW))
return NULL;
return ttys[i];
}
}
return NULL;
}
/*
* Must be called before ipwireless_network_free().
*/
void ipwireless_tty_free(struct ipw_tty *tty)
{
int j;
struct ipw_network *network = ttys[tty->index]->network;
for (j = tty->index; j < IPWIRELESS_PCMCIA_MINORS;
j += IPWIRELESS_PCMCIA_MINOR_RANGE) {
struct ipw_tty *ttyj = ttys[j];
if (ttyj) {
mutex_lock(&ttyj->ipw_tty_mutex);
if (get_tty(j))
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
": deregistering %s device ttyIPWp%d\n",
tty_type_name(ttyj->tty_type), j);
ttyj->closing = 1;
if (ttyj->port.tty != NULL) {
mutex_unlock(&ttyj->ipw_tty_mutex);
tty_vhangup(ttyj->port.tty);
/* FIXME: Exactly how is the tty object locked here
against a parallel ioctl etc */
/* FIXME2: hangup does not mean all processes
* are gone */
mutex_lock(&ttyj->ipw_tty_mutex);
}
while (ttyj->port.count)
do_ipw_close(ttyj);
ipwireless_disassociate_network_ttys(network,
ttyj->channel_idx);
tty_unregister_device(ipw_tty_driver, j);
tty_port_destroy(&ttyj->port);
ttys[j] = NULL;
mutex_unlock(&ttyj->ipw_tty_mutex);
kfree(ttyj);
}
}
}
static const struct tty_operations tty_ops = {
.open = ipw_open,
.close = ipw_close,
.hangup = ipw_hangup,
.write = ipw_write,
.write_room = ipw_write_room,
.ioctl = ipw_ioctl,
.chars_in_buffer = ipw_chars_in_buffer,
.tiocmget = ipw_tiocmget,
.tiocmset = ipw_tiocmset,
.set_serial = ipwireless_set_serial_info,
.get_serial = ipwireless_get_serial_info,
};
int ipwireless_tty_init(void)
{
int result;
ipw_tty_driver = alloc_tty_driver(IPWIRELESS_PCMCIA_MINORS);
if (!ipw_tty_driver)
return -ENOMEM;
ipw_tty_driver->driver_name = IPWIRELESS_PCCARD_NAME;
ipw_tty_driver->name = "ttyIPWp";
ipw_tty_driver->major = 0;
ipw_tty_driver->minor_start = IPWIRELESS_PCMCIA_START;
ipw_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
ipw_tty_driver->subtype = SERIAL_TYPE_NORMAL;
ipw_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
ipw_tty_driver->init_termios = tty_std_termios;
ipw_tty_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
ipw_tty_driver->init_termios.c_ispeed = 9600;
ipw_tty_driver->init_termios.c_ospeed = 9600;
tty_set_operations(ipw_tty_driver, &tty_ops);
result = tty_register_driver(ipw_tty_driver);
if (result) {
printk(KERN_ERR IPWIRELESS_PCCARD_NAME
": failed to register tty driver\n");
put_tty_driver(ipw_tty_driver);
return result;
}
return 0;
}
void ipwireless_tty_release(void)
{
int ret;
ret = tty_unregister_driver(ipw_tty_driver);
put_tty_driver(ipw_tty_driver);
if (ret != 0)
printk(KERN_ERR IPWIRELESS_PCCARD_NAME
": tty_unregister_driver failed with code %d\n", ret);
}
int ipwireless_tty_is_modem(struct ipw_tty *tty)
{
return tty->tty_type == TTYTYPE_MODEM;
}
void
ipwireless_tty_notify_control_line_change(struct ipw_tty *tty,
unsigned int channel_idx,
unsigned int control_lines,
unsigned int changed_mask)
{
unsigned int old_control_lines = tty->control_lines;
tty->control_lines = (tty->control_lines & ~changed_mask)
| (control_lines & changed_mask);
/*
* If DCD is de-asserted, we close the tty so pppd can tell that we
* have gone offline.
*/
if ((old_control_lines & IPW_CONTROL_LINE_DCD)
&& !(tty->control_lines & IPW_CONTROL_LINE_DCD)
&& tty->port.tty) {
tty_hangup(tty->port.tty);
}
}