openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/arm/boot/dts/imx6q.dtsi

1006 lines
26 KiB
Plaintext
Raw Normal View History

arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
aliases {
dts/imx: rename uart labels to consistent with hw spec UART1/UART2/... is more readable than UART0/UART1/... . Remove redundant UART comments. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14 09:26:45 +08:00
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
ARM: dts: imx: add alias for gpio Add alias for gpio nodes, so that gpio driver can identify the port number and then specify a sensible gpio base rather than using the one dynamically allocated by gpio core. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-05 14:01:28 +08:00
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
gpio5 = &gpio6;
gpio6 = &gpio7;
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a9";
reg = <0>;
next-level-cache = <&L2>;
};
cpu@1 {
compatible = "arm,cortex-a9";
reg = <1>;
next-level-cache = <&L2>;
};
cpu@2 {
compatible = "arm,cortex-a9";
reg = <2>;
next-level-cache = <&L2>;
};
cpu@3 {
compatible = "arm,cortex-a9";
reg = <3>;
next-level-cache = <&L2>;
};
};
intc: interrupt-controller@00a01000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
reg = <0x00a01000 0x1000>,
<0x00a00100 0x100>;
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
clock-frequency = <24000000>;
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&intc>;
ranges;
ARM: imx6q: add DT node for apbh-dma add DT node for apbh-dma. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-06-07 09:22:57 +08:00
dma-apbh@00110000 {
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x00110000 0x2000>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 106>;
ARM: imx6q: add DT node for apbh-dma add DT node for apbh-dma. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-06-07 09:22:57 +08:00
};
ARM: imx6q: add DT node for gpmi nand Add the DT node for gpmi nand. Add the pinmux support for gpmi nand. The gpmi nand may conflicts with other modules, such as MMC. So we do not enable the gpmi nand for mx6q-arm2 board, just add the node for the board. Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-02 11:38:46 +08:00
gpmi-nand@00112000 {
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
compatible = "fsl,imx6q-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <0 13 0x04>, <0 15 0x04>;
interrupt-names = "gpmi-dma", "bch";
clocks = <&clks 152>, <&clks 153>, <&clks 151>,
<&clks 150>, <&clks 149>;
clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
"gpmi_bch_apb", "per1_bch";
fsl,gpmi-dma-channel = <0>;
status = "disabled";
ARM: imx6q: add DT node for gpmi nand Add the DT node for gpmi nand. Add the pinmux support for gpmi nand. The gpmi nand may conflicts with other modules, such as MMC. So we do not enable the gpmi nand for mx6q-arm2 board, just add the node for the board. Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-02 11:38:46 +08:00
};
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
timer@00a00600 {
ARM: imx6q: convert to twd_local_timer_register() interface Add support for the new smp_twd runtime registration interface to the imx6q platforms, and remove the old compile-time support. The imx6q DTS file is updated to match the TWD DT documentation. Also present in this patch a DTS fix to the timer interrupt routing (the PPI connection uses bits [15:8]) and trigger (rising edge). Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-01-11 03:44:19 +08:00
compatible = "arm,cortex-a9-twd-timer";
reg = <0x00a00600 0x20>;
interrupts = <1 13 0xf01>;
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
L2: l2-cache@00a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
interrupts = <0 92 0x04>;
cache-unified;
cache-level = <2>;
};
aips-bus@02000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
spba-bus@02000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x40000>;
ranges;
spdif@02004000 {
reg = <0x02004000 0x4000>;
interrupts = <0 52 0x04>;
};
ecspi@02008000 { /* eCSPI1 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <0 31 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 112>, <&clks 112>;
clock-names = "ipg", "per";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
ecspi@0200c000 { /* eCSPI2 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <0 32 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 113>, <&clks 113>;
clock-names = "ipg", "per";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
ecspi@02010000 { /* eCSPI3 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <0 33 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 114>, <&clks 114>;
clock-names = "ipg", "per";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
ecspi@02014000 { /* eCSPI4 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <0 34 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 115>, <&clks 115>;
clock-names = "ipg", "per";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
ecspi@02018000 { /* eCSPI5 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02018000 0x4000>;
interrupts = <0 35 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 116>, <&clks 116>;
clock-names = "ipg", "per";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
ARM: imx: rename uart and fec device tree nodes It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-02 14:39:26 +08:00
uart1: serial@02020000 {
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <0 26 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
esai@02024000 {
reg = <0x02024000 0x4000>;
interrupts = <0 51 0x04>;
};
ARM: dts: imx6q-sabrelite: add ssi device Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-02 10:29:10 +08:00
ssi1: ssi@02028000 {
compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
reg = <0x02028000 0x4000>;
interrupts = <0 46 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 178>;
ARM: dts: imx6q-sabrelite: add ssi device Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-02 10:29:10 +08:00
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <38 37>;
status = "disabled";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
ARM: dts: imx6q-sabrelite: add ssi device Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-02 10:29:10 +08:00
ssi2: ssi@0202c000 {
compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
reg = <0x0202c000 0x4000>;
interrupts = <0 47 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 179>;
ARM: dts: imx6q-sabrelite: add ssi device Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-02 10:29:10 +08:00
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <42 41>;
status = "disabled";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
ARM: dts: imx6q-sabrelite: add ssi device Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-02 10:29:10 +08:00
ssi3: ssi@02030000 {
compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
reg = <0x02030000 0x4000>;
interrupts = <0 48 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 180>;
ARM: dts: imx6q-sabrelite: add ssi device Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-02 10:29:10 +08:00
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <46 45>;
status = "disabled";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
asrc@02034000 {
reg = <0x02034000 0x4000>;
interrupts = <0 50 0x04>;
};
spba@0203c000 {
reg = <0x0203c000 0x4000>;
};
};
vpu@02040000 {
reg = <0x02040000 0x3c000>;
interrupts = <0 3 0x04 0 12 0x04>;
};
aipstz@0207c000 { /* AIPSTZ1 */
reg = <0x0207c000 0x4000>;
};
pwm@02080000 { /* PWM1 */
reg = <0x02080000 0x4000>;
interrupts = <0 83 0x04>;
};
pwm@02084000 { /* PWM2 */
reg = <0x02084000 0x4000>;
interrupts = <0 84 0x04>;
};
pwm@02088000 { /* PWM3 */
reg = <0x02088000 0x4000>;
interrupts = <0 85 0x04>;
};
pwm@0208c000 { /* PWM4 */
reg = <0x0208c000 0x4000>;
interrupts = <0 86 0x04>;
};
flexcan@02090000 { /* CAN1 */
reg = <0x02090000 0x4000>;
interrupts = <0 110 0x04>;
};
flexcan@02094000 { /* CAN2 */
reg = <0x02094000 0x4000>;
interrupts = <0 111 0x04>;
};
gpt@02098000 {
compatible = "fsl,imx6q-gpt";
reg = <0x02098000 0x4000>;
interrupts = <0 55 0x04>;
};
dts/imx: rename gpio labels to consistent with hw spec GPIO1/GPIO2/... is more readable than GPIO0/GPIO1/... . Remove redundant gpio comments. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14 09:26:44 +08:00
gpio1: gpio@0209c000 {
gpio/mxc: use the edge_sel feature if available Some mxc processors have an edge_sel feature, which allows the IRQ to be triggered by any edge. This patch makes use of this feature if available, which skips mxc_flip_edge(). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-23 03:04:06 +08:00
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
reg = <0x0209c000 0x4000>;
interrupts = <0 66 0x04 0 67 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
ARM: dts: imx: update #interrupt-cells for gpio nodes Change the value of #interrupt-cells of gpio nodes from 1 to 2, so that the gpio irq type can be specified in device tree. Also update binding document to make it clear. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-06 20:03:37 +08:00
#interrupt-cells = <2>;
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
dts/imx: rename gpio labels to consistent with hw spec GPIO1/GPIO2/... is more readable than GPIO0/GPIO1/... . Remove redundant gpio comments. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14 09:26:44 +08:00
gpio2: gpio@020a0000 {
gpio/mxc: use the edge_sel feature if available Some mxc processors have an edge_sel feature, which allows the IRQ to be triggered by any edge. This patch makes use of this feature if available, which skips mxc_flip_edge(). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-23 03:04:06 +08:00
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
reg = <0x020a0000 0x4000>;
interrupts = <0 68 0x04 0 69 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
ARM: dts: imx: update #interrupt-cells for gpio nodes Change the value of #interrupt-cells of gpio nodes from 1 to 2, so that the gpio irq type can be specified in device tree. Also update binding document to make it clear. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-06 20:03:37 +08:00
#interrupt-cells = <2>;
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
dts/imx: rename gpio labels to consistent with hw spec GPIO1/GPIO2/... is more readable than GPIO0/GPIO1/... . Remove redundant gpio comments. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14 09:26:44 +08:00
gpio3: gpio@020a4000 {
gpio/mxc: use the edge_sel feature if available Some mxc processors have an edge_sel feature, which allows the IRQ to be triggered by any edge. This patch makes use of this feature if available, which skips mxc_flip_edge(). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-23 03:04:06 +08:00
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
reg = <0x020a4000 0x4000>;
interrupts = <0 70 0x04 0 71 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
ARM: dts: imx: update #interrupt-cells for gpio nodes Change the value of #interrupt-cells of gpio nodes from 1 to 2, so that the gpio irq type can be specified in device tree. Also update binding document to make it clear. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-06 20:03:37 +08:00
#interrupt-cells = <2>;
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
dts/imx: rename gpio labels to consistent with hw spec GPIO1/GPIO2/... is more readable than GPIO0/GPIO1/... . Remove redundant gpio comments. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14 09:26:44 +08:00
gpio4: gpio@020a8000 {
gpio/mxc: use the edge_sel feature if available Some mxc processors have an edge_sel feature, which allows the IRQ to be triggered by any edge. This patch makes use of this feature if available, which skips mxc_flip_edge(). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-23 03:04:06 +08:00
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
reg = <0x020a8000 0x4000>;
interrupts = <0 72 0x04 0 73 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
ARM: dts: imx: update #interrupt-cells for gpio nodes Change the value of #interrupt-cells of gpio nodes from 1 to 2, so that the gpio irq type can be specified in device tree. Also update binding document to make it clear. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-06 20:03:37 +08:00
#interrupt-cells = <2>;
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
dts/imx: rename gpio labels to consistent with hw spec GPIO1/GPIO2/... is more readable than GPIO0/GPIO1/... . Remove redundant gpio comments. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14 09:26:44 +08:00
gpio5: gpio@020ac000 {
gpio/mxc: use the edge_sel feature if available Some mxc processors have an edge_sel feature, which allows the IRQ to be triggered by any edge. This patch makes use of this feature if available, which skips mxc_flip_edge(). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-23 03:04:06 +08:00
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
reg = <0x020ac000 0x4000>;
interrupts = <0 74 0x04 0 75 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
ARM: dts: imx: update #interrupt-cells for gpio nodes Change the value of #interrupt-cells of gpio nodes from 1 to 2, so that the gpio irq type can be specified in device tree. Also update binding document to make it clear. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-06 20:03:37 +08:00
#interrupt-cells = <2>;
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
dts/imx: rename gpio labels to consistent with hw spec GPIO1/GPIO2/... is more readable than GPIO0/GPIO1/... . Remove redundant gpio comments. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14 09:26:44 +08:00
gpio6: gpio@020b0000 {
gpio/mxc: use the edge_sel feature if available Some mxc processors have an edge_sel feature, which allows the IRQ to be triggered by any edge. This patch makes use of this feature if available, which skips mxc_flip_edge(). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-23 03:04:06 +08:00
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
reg = <0x020b0000 0x4000>;
interrupts = <0 76 0x04 0 77 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
ARM: dts: imx: update #interrupt-cells for gpio nodes Change the value of #interrupt-cells of gpio nodes from 1 to 2, so that the gpio irq type can be specified in device tree. Also update binding document to make it clear. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-06 20:03:37 +08:00
#interrupt-cells = <2>;
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
dts/imx: rename gpio labels to consistent with hw spec GPIO1/GPIO2/... is more readable than GPIO0/GPIO1/... . Remove redundant gpio comments. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14 09:26:44 +08:00
gpio7: gpio@020b4000 {
gpio/mxc: use the edge_sel feature if available Some mxc processors have an edge_sel feature, which allows the IRQ to be triggered by any edge. This patch makes use of this feature if available, which skips mxc_flip_edge(). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-23 03:04:06 +08:00
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
reg = <0x020b4000 0x4000>;
interrupts = <0 78 0x04 0 79 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
ARM: dts: imx: update #interrupt-cells for gpio nodes Change the value of #interrupt-cells of gpio nodes from 1 to 2, so that the gpio irq type can be specified in device tree. Also update binding document to make it clear. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-06 20:03:37 +08:00
#interrupt-cells = <2>;
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
kpp@020b8000 {
reg = <0x020b8000 0x4000>;
interrupts = <0 82 0x04>;
};
wdog@020bc000 { /* WDOG1 */
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <0 80 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 0>;
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
wdog@020c0000 { /* WDOG2 */
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <0 81 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 0>;
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clks: ccm@020c4000 {
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
compatible = "fsl,imx6q-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <0 87 0x04 0 88 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
#clock-cells = <1>;
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
regulator: anatop-regulator: Convert to use syscon to access anatop register Using syscon to access anatop register. Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-05 10:57:15 +08:00
anatop: anatop@020c8000 {
compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
reg = <0x020c8000 0x1000>;
interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
ARM: dts: imx6q: add anatop regulators Add anatop regulators to imx6q.dtsi for all imx6q platforms. Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-03-30 21:46:53 +08:00
regulator-1p1@110 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1375000>;
regulator-always-on;
anatop-reg-offset = <0x110>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <4>;
anatop-min-voltage = <800000>;
anatop-max-voltage = <1375000>;
};
regulator-3p0@120 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3150000>;
regulator-always-on;
anatop-reg-offset = <0x120>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <0>;
anatop-min-voltage = <2625000>;
anatop-max-voltage = <3400000>;
};
regulator-2p5@130 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2750000>;
regulator-always-on;
anatop-reg-offset = <0x130>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <0>;
anatop-min-voltage = <2000000>;
anatop-max-voltage = <2750000>;
};
regulator-vddcore@140 {
compatible = "fsl,anatop-regulator";
regulator-name = "cpu";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-always-on;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <0>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <1>;
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
regulator-vddpu@140 {
compatible = "fsl,anatop-regulator";
regulator-name = "vddpu";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-always-on;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <9>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <1>;
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
regulator-vddsoc@140 {
compatible = "fsl,anatop-regulator";
regulator-name = "vddsoc";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-always-on;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <18>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <1>;
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
ARM: dts: imx6q-sabrelite: add usb devices - add usbphy devices - add usb host controller and otg devices - add usb h1 vbus regulator Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-12 14:21:41 +08:00
usbphy1: usbphy@020c9000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
reg = <0x020c9000 0x1000>;
interrupts = <0 44 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 182>;
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
ARM: dts: imx6q-sabrelite: add usb devices - add usbphy devices - add usb host controller and otg devices - add usb h1 vbus regulator Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-12 14:21:41 +08:00
usbphy2: usbphy@020ca000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
reg = <0x020ca000 0x1000>;
interrupts = <0 45 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 183>;
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
snvs@020cc000 {
reg = <0x020cc000 0x4000>;
interrupts = <0 19 0x04 0 20 0x04>;
};
epit@020d0000 { /* EPIT1 */
reg = <0x020d0000 0x4000>;
interrupts = <0 56 0x04>;
};
epit@020d4000 { /* EPIT2 */
reg = <0x020d4000 0x4000>;
interrupts = <0 57 0x04>;
};
src@020d8000 {
compatible = "fsl,imx6q-src";
reg = <0x020d8000 0x4000>;
interrupts = <0 91 0x04 0 96 0x04>;
};
gpc@020dc000 {
compatible = "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
interrupts = <0 89 0x04 0 90 0x04>;
};
ARM: imx6q: Add iomuxc gpr support into syscon Include headfile for easy using. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-05 10:57:14 +08:00
gpr: iomuxc-gpr@020e0000 {
compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
reg = <0x020e0000 0x38>;
};
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
iomuxc@020e0000 {
ARM: dts: imx6q-arm2: add pinctrl state for usdhc Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 14:58:00 +08:00
compatible = "fsl,imx6q-iomuxc";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
reg = <0x020e0000 0x4000>;
ARM: dts: imx6q-arm2: add pinctrl state for usdhc Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 14:58:00 +08:00
/* shared pinctrl settings */
ARM: dts: imx6q-sabrelite: add audmux pinctrl support Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-09 11:21:11 +08:00
audmux {
pinctrl_audmux_1: audmux-1 {
ARM: dts: imx6q: improve indentation for fsl,pins Change the indentation for property fsl,pins a little bit, so that the first and the last line get the same indentation with all other lines. Then it will be easier to copy and past any of these lines. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-10 17:17:56 +08:00
fsl,pins = <
18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
3 0x80000000 /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
>;
ARM: dts: imx6q-sabrelite: add audmux pinctrl support Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-09 11:21:11 +08:00
};
};
ARM: dts: imx6q: sort iomuxc sub-nodes in name Sort iomuxc sub-nodes in name so that the node can be located a little bit easier. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-11 11:17:42 +08:00
ecspi1 {
pinctrl_ecspi1_1: ecspi1grp-1 {
fsl,pins = <
101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
94 0x100b1 /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
>;
};
};
ARM: dts: imx6q-sabrelite: add pinctrl for usdhc and enet Add missing pinctrl of usdhc and enet for imx6q-sabrelite board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-11 10:47:14 +08:00
enet {
pinctrl_enet_1: enetgrp-1 {
fsl,pins = <
695 0x1b0b0 /* MX6Q_PAD_ENET_MDIO__ENET_MDIO */
756 0x1b0b0 /* MX6Q_PAD_ENET_MDC__ENET_MDC */
24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
>;
};
ARM: dts: imx6q-arm2: add pinctrl for uart and enet Add missing pinctrl of uart and enet for imx6q-arm2 board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-11 12:49:11 +08:00
pinctrl_enet_2: enetgrp-2 {
fsl,pins = <
890 0x1b0b0 /* MX6Q_PAD_KEY_COL1__ENET_MDIO */
909 0x1b0b0 /* MX6Q_PAD_KEY_COL2__ENET_MDC */
24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
>;
};
ARM: dts: imx6q-sabrelite: add pinctrl for usdhc and enet Add missing pinctrl of usdhc and enet for imx6q-sabrelite board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-11 10:47:14 +08:00
};
ARM: imx6q: add DT node for gpmi nand Add the DT node for gpmi nand. Add the pinmux support for gpmi nand. The gpmi nand may conflicts with other modules, such as MMC. So we do not enable the gpmi nand for mx6q-arm2 board, just add the node for the board. Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-02 11:38:46 +08:00
gpmi-nand {
pinctrl_gpmi_nand_1: gpmi-nand-1 {
ARM: dts: imx6q: improve indentation for fsl,pins Change the indentation for property fsl,pins a little bit, so that the first and the last line get the same indentation with all other lines. Then it will be easier to copy and past any of these lines. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-10 17:17:56 +08:00
fsl,pins = <
1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
1463 0x00b1 /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
>;
ARM: imx6q: add DT node for gpmi nand Add the DT node for gpmi nand. Add the pinmux support for gpmi nand. The gpmi nand may conflicts with other modules, such as MMC. So we do not enable the gpmi nand for mx6q-arm2 board, just add the node for the board. Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-02 11:38:46 +08:00
};
};
ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-09 10:47:20 +08:00
i2c1 {
pinctrl_i2c1_1: i2c1grp-1 {
ARM: dts: imx6q: improve indentation for fsl,pins Change the indentation for property fsl,pins a little bit, so that the first and the last line get the same indentation with all other lines. Then it will be easier to copy and past any of these lines. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-10 17:17:56 +08:00
fsl,pins = <
137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */
196 0x4001b8b1 /* MX6Q_PAD_EIM_D28__I2C1_SDA */
>;
ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-09 10:47:20 +08:00
};
};
ARM: dts: imx6q-sabresd: add pinctrl settings Add pinctrl settings for existing devices in imx6q-sabresd.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-11 22:06:26 +08:00
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
1140 0x1b0b1 /* MX6Q_PAD_CSI0_DAT10__UART1_TXD */
1148 0x1b0b1 /* MX6Q_PAD_CSI0_DAT11__UART1_RXD */
>;
};
};
ARM: dts: imx6q: name iomuxc sub-nodes following pin function Name iomuxc sub-nodes following pin function and hardware manual. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-11 12:33:51 +08:00
uart2 {
pinctrl_uart2_1: uart2grp-1 {
ARM: dts: imx6q: improve indentation for fsl,pins Change the indentation for property fsl,pins a little bit, so that the first and the last line get the same indentation with all other lines. Then it will be easier to copy and past any of these lines. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-10 17:17:56 +08:00
fsl,pins = <
183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */
191 0x1b0b1 /* MX6Q_PAD_EIM_D27__UART2_RXD */
>;
ARM: dts: imx6q-sabrelite: add serial2 pinctrl support Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-09 14:44:47 +08:00
};
};
ARM: dts: imx6q-arm2: add pinctrl for uart and enet Add missing pinctrl of uart and enet for imx6q-arm2 board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-11 12:49:11 +08:00
uart4 {
pinctrl_uart4_1: uart4grp-1 {
fsl,pins = <
877 0x1b0b1 /* MX6Q_PAD_KEY_COL0__UART4_TXD */
885 0x1b0b1 /* MX6Q_PAD_KEY_ROW0__UART4_RXD */
>;
};
};
ARM: dts: imx6q-sabrelite: add usbotg pinctrl support Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-19 11:25:16 +08:00
usbotg {
pinctrl_usbotg_1: usbotggrp-1 {
fsl,pins = <
1592 0x17059 /* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */
>;
};
};
ARM: dts: imx6q-sabresd: add pinctrl settings Add pinctrl settings for existing devices in imx6q-sabresd.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-11 22:06:26 +08:00
usdhc2 {
pinctrl_usdhc2_1: usdhc2grp-1 {
fsl,pins = <
1577 0x17059 /* MX6Q_PAD_SD2_CMD__USDHC2_CMD */
1569 0x10059 /* MX6Q_PAD_SD2_CLK__USDHC2_CLK */
16 0x17059 /* MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 */
0 0x17059 /* MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 */
8 0x17059 /* MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 */
1583 0x17059 /* MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 */
1430 0x17059 /* MX6Q_PAD_NANDF_D4__USDHC2_DAT4 */
1438 0x17059 /* MX6Q_PAD_NANDF_D5__USDHC2_DAT5 */
1446 0x17059 /* MX6Q_PAD_NANDF_D6__USDHC2_DAT6 */
1454 0x17059 /* MX6Q_PAD_NANDF_D7__USDHC2_DAT7 */
>;
};
};
ARM: dts: imx6q-arm2: add pinctrl state for usdhc Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 14:58:00 +08:00
usdhc3 {
pinctrl_usdhc3_1: usdhc3grp-1 {
ARM: dts: imx6q: improve indentation for fsl,pins Change the indentation for property fsl,pins a little bit, so that the first and the last line get the same indentation with all other lines. Then it will be easier to copy and past any of these lines. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-10 17:17:56 +08:00
fsl,pins = <
1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
1241 0x17059 /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
>;
ARM: dts: imx6q-arm2: add pinctrl state for usdhc Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 14:58:00 +08:00
};
ARM: dts: imx6q-sabrelite: add pinctrl for usdhc and enet Add missing pinctrl of usdhc and enet for imx6q-sabrelite board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-11 10:47:14 +08:00
pinctrl_usdhc3_2: usdhc3grp-2 {
fsl,pins = <
1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
>;
};
ARM: dts: imx6q-arm2: add pinctrl state for usdhc Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 14:58:00 +08:00
};
usdhc4 {
pinctrl_usdhc4_1: usdhc4grp-1 {
ARM: dts: imx6q: improve indentation for fsl,pins Change the indentation for property fsl,pins a little bit, so that the first and the last line get the same indentation with all other lines. Then it will be easier to copy and past any of these lines. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-10 17:17:56 +08:00
fsl,pins = <
1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
1517 0x17059 /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
>;
ARM: dts: imx6q-arm2: add pinctrl state for usdhc Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 14:58:00 +08:00
};
ARM: dts: imx6q-sabrelite: add pinctrl for usdhc and enet Add missing pinctrl of usdhc and enet for imx6q-sabrelite board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-11 10:47:14 +08:00
pinctrl_usdhc4_2: usdhc4grp-2 {
fsl,pins = <
1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
>;
};
ARM: dts: imx6q-arm2: add pinctrl state for usdhc Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 14:58:00 +08:00
};
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
dcic@020e4000 { /* DCIC1 */
reg = <0x020e4000 0x4000>;
interrupts = <0 124 0x04>;
};
dcic@020e8000 { /* DCIC2 */
reg = <0x020e8000 0x4000>;
interrupts = <0 125 0x04>;
};
sdma@020ec000 {
compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <0 2 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 155>, <&clks 155>;
clock-names = "ipg", "ahb";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
};
aips-bus@02100000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02100000 0x100000>;
ranges;
caam@02100000 {
reg = <0x02100000 0x40000>;
interrupts = <0 105 0x04 0 106 0x04>;
};
aipstz@0217c000 { /* AIPSTZ2 */
reg = <0x0217c000 0x4000>;
};
ARM: dts: imx6q-sabrelite: add usb devices - add usbphy devices - add usb host controller and otg devices - add usb h1 vbus regulator Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-12 14:21:41 +08:00
usb@02184000 { /* USB OTG */
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <0 43 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 162>;
ARM: dts: imx6q-sabrelite: add usb devices - add usbphy devices - add usb host controller and otg devices - add usb h1 vbus regulator Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-12 14:21:41 +08:00
fsl,usbphy = <&usbphy1>;
ARM: dts: imx6q-sabrelite: add usbmisc device - add usbmisc device - set property fsl,usbmisc for usb controllers - set disable-over-current for imx6q-sabrelite usb otg Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-14 14:42:45 +08:00
fsl,usbmisc = <&usbmisc 0>;
ARM: dts: imx6q-sabrelite: add usb devices - add usbphy devices - add usb host controller and otg devices - add usb h1 vbus regulator Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-12 14:21:41 +08:00
status = "disabled";
};
usb@02184200 { /* USB1 */
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
interrupts = <0 40 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 162>;
ARM: dts: imx6q-sabrelite: add usb devices - add usbphy devices - add usb host controller and otg devices - add usb h1 vbus regulator Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-12 14:21:41 +08:00
fsl,usbphy = <&usbphy2>;
ARM: dts: imx6q-sabrelite: add usbmisc device - add usbmisc device - set property fsl,usbmisc for usb controllers - set disable-over-current for imx6q-sabrelite usb otg Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-14 14:42:45 +08:00
fsl,usbmisc = <&usbmisc 1>;
ARM: dts: imx6q-sabrelite: add usb devices - add usbphy devices - add usb host controller and otg devices - add usb h1 vbus regulator Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-12 14:21:41 +08:00
status = "disabled";
};
usb@02184400 { /* USB2 */
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
interrupts = <0 41 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 162>;
ARM: dts: imx6q-sabrelite: add usbmisc device - add usbmisc device - set property fsl,usbmisc for usb controllers - set disable-over-current for imx6q-sabrelite usb otg Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-14 14:42:45 +08:00
fsl,usbmisc = <&usbmisc 2>;
ARM: dts: imx6q-sabrelite: add usb devices - add usbphy devices - add usb host controller and otg devices - add usb h1 vbus regulator Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-12 14:21:41 +08:00
status = "disabled";
};
usb@02184600 { /* USB3 */
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184600 0x200>;
interrupts = <0 42 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 162>;
ARM: dts: imx6q-sabrelite: add usbmisc device - add usbmisc device - set property fsl,usbmisc for usb controllers - set disable-over-current for imx6q-sabrelite usb otg Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-14 14:42:45 +08:00
fsl,usbmisc = <&usbmisc 3>;
ARM: dts: imx6q-sabrelite: add usb devices - add usbphy devices - add usb host controller and otg devices - add usb h1 vbus regulator Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-12 14:21:41 +08:00
status = "disabled";
};
ARM: dts: imx6q-sabrelite: add usbmisc device - add usbmisc device - set property fsl,usbmisc for usb controllers - set disable-over-current for imx6q-sabrelite usb otg Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-14 14:42:45 +08:00
usbmisc: usbmisc@02184800 {
#index-cells = <1>;
compatible = "fsl,imx6q-usbmisc";
reg = <0x02184800 0x200>;
clocks = <&clks 162>;
};
ARM: imx: rename uart and fec device tree nodes It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-02 14:39:26 +08:00
ethernet@02188000 {
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
interrupts = <0 118 0x04 0 119 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 117>, <&clks 117>;
clock-names = "ipg", "ahb";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
mlb@0218c000 {
reg = <0x0218c000 0x4000>;
interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
};
usdhc@02190000 { /* uSDHC1 */
compatible = "fsl,imx6q-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <0 22 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 163>, <&clks 163>, <&clks 163>;
clock-names = "ipg", "ahb", "per";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
usdhc@02194000 { /* uSDHC2 */
compatible = "fsl,imx6q-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <0 23 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 164>, <&clks 164>, <&clks 164>;
clock-names = "ipg", "ahb", "per";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
usdhc@02198000 { /* uSDHC3 */
compatible = "fsl,imx6q-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <0 24 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 165>, <&clks 165>, <&clks 165>;
clock-names = "ipg", "ahb", "per";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
usdhc@0219c000 { /* uSDHC4 */
compatible = "fsl,imx6q-usdhc";
reg = <0x0219c000 0x4000>;
interrupts = <0 25 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 166>, <&clks 166>, <&clks 166>;
clock-names = "ipg", "ahb", "per";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
i2c@021a0000 { /* I2C1 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
reg = <0x021a0000 0x4000>;
interrupts = <0 36 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 125>;
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
i2c@021a4000 { /* I2C2 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
reg = <0x021a4000 0x4000>;
interrupts = <0 37 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 126>;
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
i2c@021a8000 { /* I2C3 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
reg = <0x021a8000 0x4000>;
interrupts = <0 38 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 127>;
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
romcp@021ac000 {
reg = <0x021ac000 0x4000>;
};
mmdc@021b0000 { /* MMDC0 */
compatible = "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
};
mmdc@021b4000 { /* MMDC1 */
reg = <0x021b4000 0x4000>;
};
weim@021b8000 {
reg = <0x021b8000 0x4000>;
interrupts = <0 14 0x04>;
};
ocotp@021bc000 {
reg = <0x021bc000 0x4000>;
};
ocotp@021c0000 {
reg = <0x021c0000 0x4000>;
interrupts = <0 21 0x04>;
};
tzasc@021d0000 { /* TZASC1 */
reg = <0x021d0000 0x4000>;
interrupts = <0 108 0x04>;
};
tzasc@021d4000 { /* TZASC2 */
reg = <0x021d4000 0x4000>;
interrupts = <0 109 0x04>;
};
audmux@021d8000 {
ARM: dts: imx6q-sabrelite: add audmux device Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-02 10:32:26 +08:00
compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
reg = <0x021d8000 0x4000>;
ARM: dts: imx6q-sabrelite: add audmux device Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-02 10:32:26 +08:00
status = "disabled";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
};
mipi@021dc000 { /* MIPI-CSI */
reg = <0x021dc000 0x4000>;
};
mipi@021e0000 { /* MIPI-DSI */
reg = <0x021e0000 0x4000>;
};
vdoa@021e4000 {
reg = <0x021e4000 0x4000>;
interrupts = <0 18 0x04>;
};
ARM: imx: rename uart and fec device tree nodes It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-02 14:39:26 +08:00
uart2: serial@021e8000 {
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021e8000 0x4000>;
interrupts = <0 27 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
ARM: imx: rename uart and fec device tree nodes It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-02 14:39:26 +08:00
uart3: serial@021ec000 {
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021ec000 0x4000>;
interrupts = <0 28 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
ARM: imx: rename uart and fec device tree nodes It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-02 14:39:26 +08:00
uart4: serial@021f0000 {
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f0000 0x4000>;
interrupts = <0 29 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
ARM: imx: rename uart and fec device tree nodes It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-02 14:39:26 +08:00
uart5: serial@021f4000 {
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
interrupts = <0 30 0x04>;
ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-22 21:36:28 +08:00
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
arm/imx6q: add device tree source It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 13:53:26 +08:00
status = "disabled";
};
};
};
};