mirror of https://gitee.com/openkylin/linux.git
35 lines
1.1 KiB
Plaintext
35 lines
1.1 KiB
Plaintext
|
* AMD 10GbE driver (amd-xgbe)
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: Should be "amd,xgbe-seattle-v1a"
|
||
|
|
- reg: Address and length of the register sets for the device
|
||
|
|
- MAC registers
|
||
|
|
- PCS registers
|
||
|
|
- interrupt-parent: Should be the phandle for the interrupt controller
|
||
|
|
that services interrupts for this device
|
||
|
|
- interrupts: Should contain the amd-xgbe interrupt
|
||
|
|
- clocks: Should be the DMA clock for the amd-xgbe device (used for
|
||
|
|
calculating the correct Rx interrupt watchdog timer value on a DMA
|
||
|
|
channel for coalescing)
|
||
|
|
- clock-names: Should be the name of the DMA clock, "dma_clk"
|
||
|
|
- phy-handle: See ethernet.txt file in the same directory
|
||
|
|
- phy-mode: See ethernet.txt file in the same directory
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
- mac-address: mac address to be assigned to the device. Can be overridden
|
||
|
|
by UEFI.
|
||
|
|
|
||
|
|
Example:
|
||
|
|
xgbe@e0700000 {
|
||
|
|
compatible = "amd,xgbe-seattle-v1a";
|
||
|
|
reg = <0 0xe0700000 0 0x80000>,
|
||
|
|
<0 0xe0780000 0 0x80000>;
|
||
|
|
interrupt-parent = <&gic>;
|
||
|
|
interrupts = <0 325 4>;
|
||
|
|
clocks = <&xgbe_clk>;
|
||
|
|
clock-names = "dma_clk";
|
||
|
|
phy-handle = <&phy>;
|
||
|
|
phy-mode = "xgmii";
|
||
|
|
mac-address = [ 02 a1 a2 a3 a4 a5 ];
|
||
|
|
};
|