linux/arch/xtensa/kernel/coprocessor.S

201 lines
5.5 KiB
ArmAsm
Raw Normal View History

/*
* arch/xtensa/kernel/coprocessor.S
*
* Xtensa processor configuration-specific table of coprocessor and
* other custom register layout information.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003 - 2005 Tensilica Inc.
*
* Marc Gauthier <marc@tensilica.com> <marc@alumni.uwaterloo.ca>
*/
/*
* This module contains a table that describes the layout of the various
* custom registers and states associated with each coprocessor, as well
* as those not associated with any coprocessor ("extra state").
* This table is included with core dumps and is available via the ptrace
* interface, allowing the layout of such register/state information to
* be modified in the kernel without affecting the debugger. Each
* register or state is identified using a 32-bit "libdb target number"
* assigned when the Xtensa processor is generated.
*/
#include <linux/linkage.h>
#include <asm/processor.h>
#if XCHAL_HAVE_CP
#define CP_LAST ((XCHAL_CP_MAX - 1) * COPROCESSOR_INFO_SIZE)
ENTRY(release_coprocessors)
entry a1, 16
# a2: task
movi a3, 1 << XCHAL_CP_MAX # a3: coprocessor-bit
movi a4, coprocessor_info+CP_LAST # a4: owner-table
# a5: tmp
movi a6, 0 # a6: 0
rsil a7, LOCKLEVEL # a7: PS
1: /* Check if task is coprocessor owner of coprocessor[i]. */
l32i a5, a4, COPROCESSOR_INFO_OWNER
srli a3, a3, 1
beqz a3, 1f
addi a4, a4, -8
beq a2, a5, 1b
/* Found an entry: Clear entry CPENABLE bit to disable CP. */
rsr a5, CPENABLE
s32i a6, a4, COPROCESSOR_INFO_OWNER
xor a5, a3, a5
wsr a5, CPENABLE
bnez a3, 1b
1: wsr a7, PS
rsync
retw
ENTRY(disable_coprocessor)
entry sp, 16
rsil a7, LOCKLEVEL
rsr a3, CPENABLE
movi a4, 1
ssl a2
sll a4, a4
and a4, a3, a4
xor a3, a3, a4
wsr a3, CPENABLE
wsr a7, PS
rsync
retw
ENTRY(enable_coprocessor)
entry sp, 16
rsil a7, LOCKLEVEL
rsr a3, CPENABLE
movi a4, 1
ssl a2
sll a4, a4
or a3, a3, a4
wsr a3, CPENABLE
wsr a7, PS
rsync
retw
#endif
ENTRY(save_coprocessor_extra)
entry sp, 16
xchal_extra_store_funcbody
retw
ENTRY(restore_coprocessor_extra)
entry sp, 16
xchal_extra_load_funcbody
retw
ENTRY(save_coprocessor_registers)
entry sp, 16
xchal_cpi_store_funcbody
retw
ENTRY(restore_coprocessor_registers)
entry sp, 16
xchal_cpi_load_funcbody
retw
/*
* The Xtensa compile-time HAL (core.h) XCHAL_*_SA_CONTENTS_LIBDB macros
* describe the contents of coprocessor & extra save areas in terms of
* undefined CONTENTS_LIBDB_{SREG,UREG,REGF} macros. We define these
* latter macros here; they expand into a table of the format we want.
* The general format is:
*
* CONTENTS_LIBDB_SREG(libdbnum, offset, size, align, rsv1, name, sregnum,
* bitmask, rsv2, rsv3)
* CONTENTS_LIBDB_UREG(libdbnum, offset, size, align, rsv1, name, uregnum,
* bitmask, rsv2, rsv3)
* CONTENTS_LIBDB_REGF(libdbnum, offset, size, align, rsv1, name, index,
* numentries, contentsize, regname_base,
* regfile_name, rsv2, rsv3)
*
* For this table, we only care about the <libdbnum>, <offset> and <size>
* fields.
*/
/* Map all XCHAL CONTENTS macros to the reg_entry asm macro defined below: */
#define CONTENTS_LIBDB_SREG(libdbnum,offset,size,align,rsv1,name,sregnum, \
bitmask, rsv2, rsv3) \
reg_entry libdbnum, offset, size ;
#define CONTENTS_LIBDB_UREG(libdbnum,offset,size,align,rsv1,name,uregnum, \
bitmask, rsv2, rsv3) \
reg_entry libdbnum, offset, size ;
#define CONTENTS_LIBDB_REGF(libdbnum, offset, size, align, rsv1, name, index, \
numentries, contentsize, regname_base, \
regfile_name, rsv2, rsv3) \
reg_entry libdbnum, offset, size ;
/* A single table entry: */
.macro reg_entry libdbnum, offset, size
.ifne (__last_offset-(__last_group_offset+\offset))
/* padding entry */
.word (0xFC000000+__last_offset-(__last_group_offset+\offset))
.endif
.word \libdbnum /* actual entry */
.set __last_offset, __last_group_offset+\offset+\size
.endm /* reg_entry */
/* Table entry that marks the beginning of a group (coprocessor or "extra"): */
.macro reg_group cpnum, num_entries, align
.set __last_group_offset, (__last_offset + \align- 1) & -\align
.ifne \num_entries
.word 0xFD000000+(\cpnum<<16)+\num_entries
.endif
.endm /* reg_group */
/*
* Register info tables.
*/
.section .rodata, "a"
.globl _xtensa_reginfo_tables
.globl _xtensa_reginfo_table_size
.align 4
_xtensa_reginfo_table_size:
.word _xtensa_reginfo_table_end - _xtensa_reginfo_tables
_xtensa_reginfo_tables:
.set __last_offset, 0
reg_group 0xFF, XCHAL_EXTRA_SA_CONTENTS_LIBDB_NUM, XCHAL_EXTRA_SA_ALIGN
XCHAL_EXTRA_SA_CONTENTS_LIBDB
reg_group 0, XCHAL_CP0_SA_CONTENTS_LIBDB_NUM, XCHAL_CP0_SA_ALIGN
XCHAL_CP0_SA_CONTENTS_LIBDB
reg_group 1, XCHAL_CP1_SA_CONTENTS_LIBDB_NUM, XCHAL_CP1_SA_ALIGN
XCHAL_CP1_SA_CONTENTS_LIBDB
reg_group 2, XCHAL_CP2_SA_CONTENTS_LIBDB_NUM, XCHAL_CP2_SA_ALIGN
XCHAL_CP2_SA_CONTENTS_LIBDB
reg_group 3, XCHAL_CP3_SA_CONTENTS_LIBDB_NUM, XCHAL_CP3_SA_ALIGN
XCHAL_CP3_SA_CONTENTS_LIBDB
reg_group 4, XCHAL_CP4_SA_CONTENTS_LIBDB_NUM, XCHAL_CP4_SA_ALIGN
XCHAL_CP4_SA_CONTENTS_LIBDB
reg_group 5, XCHAL_CP5_SA_CONTENTS_LIBDB_NUM, XCHAL_CP5_SA_ALIGN
XCHAL_CP5_SA_CONTENTS_LIBDB
reg_group 6, XCHAL_CP6_SA_CONTENTS_LIBDB_NUM, XCHAL_CP6_SA_ALIGN
XCHAL_CP6_SA_CONTENTS_LIBDB
reg_group 7, XCHAL_CP7_SA_CONTENTS_LIBDB_NUM, XCHAL_CP7_SA_ALIGN
XCHAL_CP7_SA_CONTENTS_LIBDB
.word 0xFC000000 /* invalid register number,marks end of table*/
_xtensa_reginfo_table_end: