openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/m68k/include/asm/mcf8390.h

132 lines
3.7 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/****************************************************************************/
/*
m68knommu: move the badly named mcfne.h to a better mcf8390.h The mcfne.h include contains definitions to support NS8390 eth based hardware on ColdFire based CPU boards. So change its name to reflect that better. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-04 21:49:59 +08:00
* mcf8390.h -- NS8390 support for ColdFire eval boards.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* (C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com)
* (C) Copyright 2000, Lineo (www.lineo.com)
* (C) Copyright 2001, SnapGear (www.snapgear.com)
*
* 19990409 David W. Miller Converted from m5206ne.h for 5307 eval board
*
* Hacked support for m5206e Cadre III evaluation board
* Fred Stevens (fred.stevens@pemstar.com) 13 April 1999
*/
/****************************************************************************/
m68knommu: move the badly named mcfne.h to a better mcf8390.h The mcfne.h include contains definitions to support NS8390 eth based hardware on ColdFire based CPU boards. So change its name to reflect that better. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-04 21:49:59 +08:00
#ifndef mcf8390_h
#define mcf8390_h
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/****************************************************************************/
/*
* Support for NE2000 clones devices in ColdFire based boards.
* Not all boards address these parts the same way, some use a
* direct addressing method, others use a side-band address space
* to access odd address registers, some require byte swapping
* others do not.
*/
#define BSWAP(w) (((w) << 8) | ((w) >> 8))
#define RSWAP(w) (w)
/*
* Define the basic hardware resources of NE2000 boards.
*/
[PATCH] m68knommu: use board defines to distinguish boards Use board name defines to distinguish boards, instead of combinations of more generic defines. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-02 13:04:37 +08:00
#if defined(CONFIG_ARN5206)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define NE2000_ADDR 0x40000300
#define NE2000_ODDOFFSET 0x00010000
net: add support for NS8390 based eth controllers on some ColdFire CPU boards A number of older ColdFire CPU based boards use NS8390 based network controllers. Most use the Davicom 9008F or the UMC 9008F. This driver provides the support code to get these devices working on these platforms. Generally the NS8390 based eth device is direct connected via the general purpose bus of the ColdFire CPU. So its addressing and interrupt setup is fixed on each of the different platforms (classic platform setup). This driver is based on the other drivers/net/ethernet/8390 drivers, and includes the lib8390.c code. It uses the existing definitions of the board NS8390 device addresses, interrupts and access types from the arch/m68k/include/asm/mcf8390.h, but moves the IO access functions into the driver code and out of that header. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-04 21:50:00 +08:00
#define NE2000_ADDRSIZE 0x00020000
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define NE2000_IRQ_VECTOR 0xf0
#define NE2000_IRQ_PRIORITY 2
#define NE2000_IRQ_LEVEL 4
#define NE2000_BYTE volatile unsigned short
#endif
[PATCH] m68knommu: use board defines to distinguish boards Use board name defines to distinguish boards, instead of combinations of more generic defines. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-02 13:04:37 +08:00
#if defined(CONFIG_M5206eC3)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define NE2000_ADDR 0x40000300
#define NE2000_ODDOFFSET 0x00010000
net: add support for NS8390 based eth controllers on some ColdFire CPU boards A number of older ColdFire CPU based boards use NS8390 based network controllers. Most use the Davicom 9008F or the UMC 9008F. This driver provides the support code to get these devices working on these platforms. Generally the NS8390 based eth device is direct connected via the general purpose bus of the ColdFire CPU. So its addressing and interrupt setup is fixed on each of the different platforms (classic platform setup). This driver is based on the other drivers/net/ethernet/8390 drivers, and includes the lib8390.c code. It uses the existing definitions of the board NS8390 device addresses, interrupts and access types from the arch/m68k/include/asm/mcf8390.h, but moves the IO access functions into the driver code and out of that header. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-04 21:50:00 +08:00
#define NE2000_ADDRSIZE 0x00020000
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define NE2000_IRQ_VECTOR 0x1c
#define NE2000_IRQ_PRIORITY 2
#define NE2000_IRQ_LEVEL 4
#define NE2000_BYTE volatile unsigned short
#endif
#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
#define NE2000_ADDR 0x30000300
net: add support for NS8390 based eth controllers on some ColdFire CPU boards A number of older ColdFire CPU based boards use NS8390 based network controllers. Most use the Davicom 9008F or the UMC 9008F. This driver provides the support code to get these devices working on these platforms. Generally the NS8390 based eth device is direct connected via the general purpose bus of the ColdFire CPU. So its addressing and interrupt setup is fixed on each of the different platforms (classic platform setup). This driver is based on the other drivers/net/ethernet/8390 drivers, and includes the lib8390.c code. It uses the existing definitions of the board NS8390 device addresses, interrupts and access types from the arch/m68k/include/asm/mcf8390.h, but moves the IO access functions into the driver code and out of that header. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-04 21:50:00 +08:00
#define NE2000_ADDRSIZE 0x00001000
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define NE2000_IRQ_VECTOR 25
#define NE2000_IRQ_PRIORITY 1
#define NE2000_IRQ_LEVEL 3
#define NE2000_BYTE volatile unsigned char
#endif
[PATCH] m68knommu: use board defines to distinguish boards Use board name defines to distinguish boards, instead of combinations of more generic defines. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-02 13:04:37 +08:00
#if defined(CONFIG_M5307C3)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define NE2000_ADDR 0x40000300
#define NE2000_ODDOFFSET 0x00010000
net: add support for NS8390 based eth controllers on some ColdFire CPU boards A number of older ColdFire CPU based boards use NS8390 based network controllers. Most use the Davicom 9008F or the UMC 9008F. This driver provides the support code to get these devices working on these platforms. Generally the NS8390 based eth device is direct connected via the general purpose bus of the ColdFire CPU. So its addressing and interrupt setup is fixed on each of the different platforms (classic platform setup). This driver is based on the other drivers/net/ethernet/8390 drivers, and includes the lib8390.c code. It uses the existing definitions of the board NS8390 device addresses, interrupts and access types from the arch/m68k/include/asm/mcf8390.h, but moves the IO access functions into the driver code and out of that header. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-04 21:50:00 +08:00
#define NE2000_ADDRSIZE 0x00020000
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define NE2000_IRQ_VECTOR 0x1b
#define NE2000_BYTE volatile unsigned short
#endif
#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
#define NE2000_ADDR 0x30600300
#define NE2000_ODDOFFSET 0x00008000
net: add support for NS8390 based eth controllers on some ColdFire CPU boards A number of older ColdFire CPU based boards use NS8390 based network controllers. Most use the Davicom 9008F or the UMC 9008F. This driver provides the support code to get these devices working on these platforms. Generally the NS8390 based eth device is direct connected via the general purpose bus of the ColdFire CPU. So its addressing and interrupt setup is fixed on each of the different platforms (classic platform setup). This driver is based on the other drivers/net/ethernet/8390 drivers, and includes the lib8390.c code. It uses the existing definitions of the board NS8390 device addresses, interrupts and access types from the arch/m68k/include/asm/mcf8390.h, but moves the IO access functions into the driver code and out of that header. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-04 21:50:00 +08:00
#define NE2000_ADDRSIZE 0x00010000
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define NE2000_IRQ_VECTOR 67
#undef BSWAP
#define BSWAP(w) (w)
#define NE2000_BYTE volatile unsigned short
#undef RSWAP
#define RSWAP(w) (((w) << 8) | ((w) >> 8))
#endif
#if defined(CONFIG_M5307) && defined(CONFIG_NETtel)
#define NE2000_ADDR0 0x30600300
#define NE2000_ADDR1 0x30800300
#define NE2000_ODDOFFSET 0x00008000
net: add support for NS8390 based eth controllers on some ColdFire CPU boards A number of older ColdFire CPU based boards use NS8390 based network controllers. Most use the Davicom 9008F or the UMC 9008F. This driver provides the support code to get these devices working on these platforms. Generally the NS8390 based eth device is direct connected via the general purpose bus of the ColdFire CPU. So its addressing and interrupt setup is fixed on each of the different platforms (classic platform setup). This driver is based on the other drivers/net/ethernet/8390 drivers, and includes the lib8390.c code. It uses the existing definitions of the board NS8390 device addresses, interrupts and access types from the arch/m68k/include/asm/mcf8390.h, but moves the IO access functions into the driver code and out of that header. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-04 21:50:00 +08:00
#define NE2000_ADDRSIZE 0x00010000
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define NE2000_IRQ_VECTOR0 27
#define NE2000_IRQ_VECTOR1 29
#undef BSWAP
#define BSWAP(w) (w)
#define NE2000_BYTE volatile unsigned short
#undef RSWAP
#define RSWAP(w) (((w) << 8) | ((w) >> 8))
#endif
#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
#define NE2000_ADDR 0x30600300
#define NE2000_ODDOFFSET 0x00008000
net: add support for NS8390 based eth controllers on some ColdFire CPU boards A number of older ColdFire CPU based boards use NS8390 based network controllers. Most use the Davicom 9008F or the UMC 9008F. This driver provides the support code to get these devices working on these platforms. Generally the NS8390 based eth device is direct connected via the general purpose bus of the ColdFire CPU. So its addressing and interrupt setup is fixed on each of the different platforms (classic platform setup). This driver is based on the other drivers/net/ethernet/8390 drivers, and includes the lib8390.c code. It uses the existing definitions of the board NS8390 device addresses, interrupts and access types from the arch/m68k/include/asm/mcf8390.h, but moves the IO access functions into the driver code and out of that header. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-04 21:50:00 +08:00
#define NE2000_ADDRSIZE 0x00010000
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define NE2000_IRQ_VECTOR 27
#undef BSWAP
#define BSWAP(w) (w)
#define NE2000_BYTE volatile unsigned short
#undef RSWAP
#define RSWAP(w) (((w) << 8) | ((w) >> 8))
#endif
[PATCH] m68knommu: use board defines to distinguish boards Use board name defines to distinguish boards, instead of combinations of more generic defines. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-02 13:04:37 +08:00
#if defined(CONFIG_ARN5307)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define NE2000_ADDR 0xfe600300
#define NE2000_ODDOFFSET 0x00010000
net: add support for NS8390 based eth controllers on some ColdFire CPU boards A number of older ColdFire CPU based boards use NS8390 based network controllers. Most use the Davicom 9008F or the UMC 9008F. This driver provides the support code to get these devices working on these platforms. Generally the NS8390 based eth device is direct connected via the general purpose bus of the ColdFire CPU. So its addressing and interrupt setup is fixed on each of the different platforms (classic platform setup). This driver is based on the other drivers/net/ethernet/8390 drivers, and includes the lib8390.c code. It uses the existing definitions of the board NS8390 device addresses, interrupts and access types from the arch/m68k/include/asm/mcf8390.h, but moves the IO access functions into the driver code and out of that header. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-04 21:50:00 +08:00
#define NE2000_ADDRSIZE 0x00020000
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define NE2000_IRQ_VECTOR 0x1b
#define NE2000_IRQ_PRIORITY 2
#define NE2000_IRQ_LEVEL 3
#define NE2000_BYTE volatile unsigned short
#endif
[PATCH] m68knommu: use board defines to distinguish boards Use board name defines to distinguish boards, instead of combinations of more generic defines. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-02 13:04:37 +08:00
#if defined(CONFIG_M5407C3)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define NE2000_ADDR 0x40000300
#define NE2000_ODDOFFSET 0x00010000
net: add support for NS8390 based eth controllers on some ColdFire CPU boards A number of older ColdFire CPU based boards use NS8390 based network controllers. Most use the Davicom 9008F or the UMC 9008F. This driver provides the support code to get these devices working on these platforms. Generally the NS8390 based eth device is direct connected via the general purpose bus of the ColdFire CPU. So its addressing and interrupt setup is fixed on each of the different platforms (classic platform setup). This driver is based on the other drivers/net/ethernet/8390 drivers, and includes the lib8390.c code. It uses the existing definitions of the board NS8390 device addresses, interrupts and access types from the arch/m68k/include/asm/mcf8390.h, but moves the IO access functions into the driver code and out of that header. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-04 21:50:00 +08:00
#define NE2000_ADDRSIZE 0x00020000
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define NE2000_IRQ_VECTOR 0x1b
#define NE2000_BYTE volatile unsigned short
#endif
/****************************************************************************/
m68knommu: move the badly named mcfne.h to a better mcf8390.h The mcfne.h include contains definitions to support NS8390 eth based hardware on ColdFire based CPU boards. So change its name to reflect that better. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-04 21:49:59 +08:00
#endif /* mcf8390_h */