linux/arch/x86/include/asm/fpu/xstate.h

241 lines
5.7 KiB
C
Raw Normal View History

#ifndef __ASM_X86_XSAVE_H
#define __ASM_X86_XSAVE_H
#include <linux/types.h>
#include <asm/processor.h>
#include <linux/uaccess.h>
/* Bit 63 of XCR0 is reserved for future expansion */
#define XSTATE_EXTEND_MASK (~(XSTATE_FPSSE | (1ULL << 63)))
#define XSTATE_CPUID 0x0000000d
#define FXSAVE_SIZE 512
#define XSAVE_HDR_SIZE 64
#define XSAVE_HDR_OFFSET FXSAVE_SIZE
#define XSAVE_YMM_SIZE 256
#define XSAVE_YMM_OFFSET (XSAVE_HDR_SIZE + XSAVE_HDR_OFFSET)
/* Supported features which support lazy state saving */
#define XSTATE_LAZY (XSTATE_FP | XSTATE_SSE | XSTATE_YMM \
| XSTATE_OPMASK | XSTATE_ZMM_Hi256 | XSTATE_Hi16_ZMM)
/* Supported features which require eager state saving */
#define XSTATE_EAGER (XSTATE_BNDREGS | XSTATE_BNDCSR)
/* All currently supported features */
#define XCNTXT_MASK (XSTATE_LAZY | XSTATE_EAGER)
#ifdef CONFIG_X86_64
#define REX_PREFIX "0x48, "
#else
#define REX_PREFIX
#endif
extern unsigned int xstate_size;
extern u64 xfeatures_mask;
extern u64 xstate_fx_sw_bytes[USER_XSTATE_FX_SW_WORDS];
extern void update_regset_xstate_info(unsigned int size, u64 xstate_mask);
/* These macros all use (%edi)/(%rdi) as the single memory argument. */
#define XSAVE ".byte " REX_PREFIX "0x0f,0xae,0x27"
#define XSAVEOPT ".byte " REX_PREFIX "0x0f,0xae,0x37"
#define XSAVES ".byte " REX_PREFIX "0x0f,0xc7,0x2f"
#define XRSTOR ".byte " REX_PREFIX "0x0f,0xae,0x2f"
#define XRSTORS ".byte " REX_PREFIX "0x0f,0xc7,0x1f"
#define xstate_fault ".section .fixup,\"ax\"\n" \
"3: movl $-1,%[err]\n" \
" jmp 2b\n" \
".previous\n" \
_ASM_EXTABLE(1b, 3b) \
: [err] "=r" (err)
x86/xsaves: Add xsaves and xrstors support for booting time Since boot_cpu_data and cpu capabilities are not enabled yet during early booting time, alternative can not be used in some functions to access xsave area. Therefore, we define two new functions xrstor_state_booting() and xsave_state_booting() to access xsave area just during early booting time. xrstor_state_booting restores xstate from xsave area during early booting time. xsave_state_booting saves xstate to xsave area during early booting time. The two functions are similar to xrstor_state and xsave_state respectively. But the two functions don't use alternatives because alternatives are not enabled when they are called in such early booting time. xrstor_state_booting is called only by functions defined as __init. So it's defined as __init and will be removed from memory after booting time. There is no extra memory cost caused by this function during running time. But because xsave_state_booting can be called by run-time function __save_fpu(), it's not defined as __init and will stay in memory during running time although it will not be called anymore during running time. It is not ideal to have this function stay in memory during running time. But it's a pretty small function and the memory cost will be small. By doing in this way, we can avoid to change a lot of code to just remove this small function and save a bit memory for running time. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/1401387164-43416-13-git-send-email-fenghua.yu@intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-30 02:12:40 +08:00
/*
* This function is called only during boot time when x86 caps are not set
* up and alternative can not be used yet.
*/
static inline int xsave_state_booting(struct xsave_struct *fx)
x86/xsaves: Add xsaves and xrstors support for booting time Since boot_cpu_data and cpu capabilities are not enabled yet during early booting time, alternative can not be used in some functions to access xsave area. Therefore, we define two new functions xrstor_state_booting() and xsave_state_booting() to access xsave area just during early booting time. xrstor_state_booting restores xstate from xsave area during early booting time. xsave_state_booting saves xstate to xsave area during early booting time. The two functions are similar to xrstor_state and xsave_state respectively. But the two functions don't use alternatives because alternatives are not enabled when they are called in such early booting time. xrstor_state_booting is called only by functions defined as __init. So it's defined as __init and will be removed from memory after booting time. There is no extra memory cost caused by this function during running time. But because xsave_state_booting can be called by run-time function __save_fpu(), it's not defined as __init and will stay in memory during running time although it will not be called anymore during running time. It is not ideal to have this function stay in memory during running time. But it's a pretty small function and the memory cost will be small. By doing in this way, we can avoid to change a lot of code to just remove this small function and save a bit memory for running time. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/1401387164-43416-13-git-send-email-fenghua.yu@intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-30 02:12:40 +08:00
{
u64 mask = -1;
x86/xsaves: Add xsaves and xrstors support for booting time Since boot_cpu_data and cpu capabilities are not enabled yet during early booting time, alternative can not be used in some functions to access xsave area. Therefore, we define two new functions xrstor_state_booting() and xsave_state_booting() to access xsave area just during early booting time. xrstor_state_booting restores xstate from xsave area during early booting time. xsave_state_booting saves xstate to xsave area during early booting time. The two functions are similar to xrstor_state and xsave_state respectively. But the two functions don't use alternatives because alternatives are not enabled when they are called in such early booting time. xrstor_state_booting is called only by functions defined as __init. So it's defined as __init and will be removed from memory after booting time. There is no extra memory cost caused by this function during running time. But because xsave_state_booting can be called by run-time function __save_fpu(), it's not defined as __init and will stay in memory during running time although it will not be called anymore during running time. It is not ideal to have this function stay in memory during running time. But it's a pretty small function and the memory cost will be small. By doing in this way, we can avoid to change a lot of code to just remove this small function and save a bit memory for running time. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/1401387164-43416-13-git-send-email-fenghua.yu@intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-30 02:12:40 +08:00
u32 lmask = mask;
u32 hmask = mask >> 32;
int err = 0;
WARN_ON(system_state != SYSTEM_BOOTING);
if (boot_cpu_has(X86_FEATURE_XSAVES))
asm volatile("1:"XSAVES"\n\t"
"2:\n\t"
xstate_fault
: "D" (fx), "m" (*fx), "a" (lmask), "d" (hmask)
x86/xsaves: Add xsaves and xrstors support for booting time Since boot_cpu_data and cpu capabilities are not enabled yet during early booting time, alternative can not be used in some functions to access xsave area. Therefore, we define two new functions xrstor_state_booting() and xsave_state_booting() to access xsave area just during early booting time. xrstor_state_booting restores xstate from xsave area during early booting time. xsave_state_booting saves xstate to xsave area during early booting time. The two functions are similar to xrstor_state and xsave_state respectively. But the two functions don't use alternatives because alternatives are not enabled when they are called in such early booting time. xrstor_state_booting is called only by functions defined as __init. So it's defined as __init and will be removed from memory after booting time. There is no extra memory cost caused by this function during running time. But because xsave_state_booting can be called by run-time function __save_fpu(), it's not defined as __init and will stay in memory during running time although it will not be called anymore during running time. It is not ideal to have this function stay in memory during running time. But it's a pretty small function and the memory cost will be small. By doing in this way, we can avoid to change a lot of code to just remove this small function and save a bit memory for running time. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/1401387164-43416-13-git-send-email-fenghua.yu@intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-30 02:12:40 +08:00
: "memory");
else
asm volatile("1:"XSAVE"\n\t"
"2:\n\t"
xstate_fault
: "D" (fx), "m" (*fx), "a" (lmask), "d" (hmask)
x86/xsaves: Add xsaves and xrstors support for booting time Since boot_cpu_data and cpu capabilities are not enabled yet during early booting time, alternative can not be used in some functions to access xsave area. Therefore, we define two new functions xrstor_state_booting() and xsave_state_booting() to access xsave area just during early booting time. xrstor_state_booting restores xstate from xsave area during early booting time. xsave_state_booting saves xstate to xsave area during early booting time. The two functions are similar to xrstor_state and xsave_state respectively. But the two functions don't use alternatives because alternatives are not enabled when they are called in such early booting time. xrstor_state_booting is called only by functions defined as __init. So it's defined as __init and will be removed from memory after booting time. There is no extra memory cost caused by this function during running time. But because xsave_state_booting can be called by run-time function __save_fpu(), it's not defined as __init and will stay in memory during running time although it will not be called anymore during running time. It is not ideal to have this function stay in memory during running time. But it's a pretty small function and the memory cost will be small. By doing in this way, we can avoid to change a lot of code to just remove this small function and save a bit memory for running time. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/1401387164-43416-13-git-send-email-fenghua.yu@intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-30 02:12:40 +08:00
: "memory");
return err;
}
/*
* This function is called only during boot time when x86 caps are not set
* up and alternative can not be used yet.
*/
static inline int xrstor_state_booting(struct xsave_struct *fx, u64 mask)
{
u32 lmask = mask;
u32 hmask = mask >> 32;
int err = 0;
WARN_ON(system_state != SYSTEM_BOOTING);
if (boot_cpu_has(X86_FEATURE_XSAVES))
asm volatile("1:"XRSTORS"\n\t"
"2:\n\t"
xstate_fault
: "D" (fx), "m" (*fx), "a" (lmask), "d" (hmask)
x86/xsaves: Add xsaves and xrstors support for booting time Since boot_cpu_data and cpu capabilities are not enabled yet during early booting time, alternative can not be used in some functions to access xsave area. Therefore, we define two new functions xrstor_state_booting() and xsave_state_booting() to access xsave area just during early booting time. xrstor_state_booting restores xstate from xsave area during early booting time. xsave_state_booting saves xstate to xsave area during early booting time. The two functions are similar to xrstor_state and xsave_state respectively. But the two functions don't use alternatives because alternatives are not enabled when they are called in such early booting time. xrstor_state_booting is called only by functions defined as __init. So it's defined as __init and will be removed from memory after booting time. There is no extra memory cost caused by this function during running time. But because xsave_state_booting can be called by run-time function __save_fpu(), it's not defined as __init and will stay in memory during running time although it will not be called anymore during running time. It is not ideal to have this function stay in memory during running time. But it's a pretty small function and the memory cost will be small. By doing in this way, we can avoid to change a lot of code to just remove this small function and save a bit memory for running time. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/1401387164-43416-13-git-send-email-fenghua.yu@intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-30 02:12:40 +08:00
: "memory");
else
asm volatile("1:"XRSTOR"\n\t"
"2:\n\t"
xstate_fault
: "D" (fx), "m" (*fx), "a" (lmask), "d" (hmask)
x86/xsaves: Add xsaves and xrstors support for booting time Since boot_cpu_data and cpu capabilities are not enabled yet during early booting time, alternative can not be used in some functions to access xsave area. Therefore, we define two new functions xrstor_state_booting() and xsave_state_booting() to access xsave area just during early booting time. xrstor_state_booting restores xstate from xsave area during early booting time. xsave_state_booting saves xstate to xsave area during early booting time. The two functions are similar to xrstor_state and xsave_state respectively. But the two functions don't use alternatives because alternatives are not enabled when they are called in such early booting time. xrstor_state_booting is called only by functions defined as __init. So it's defined as __init and will be removed from memory after booting time. There is no extra memory cost caused by this function during running time. But because xsave_state_booting can be called by run-time function __save_fpu(), it's not defined as __init and will stay in memory during running time although it will not be called anymore during running time. It is not ideal to have this function stay in memory during running time. But it's a pretty small function and the memory cost will be small. By doing in this way, we can avoid to change a lot of code to just remove this small function and save a bit memory for running time. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/1401387164-43416-13-git-send-email-fenghua.yu@intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-30 02:12:40 +08:00
: "memory");
return err;
}
/*
* Save processor xstate to xsave area.
*/
static inline int xsave_state(struct xsave_struct *fx)
{
u64 mask = -1;
u32 lmask = mask;
u32 hmask = mask >> 32;
int err = 0;
WARN_ON(!alternatives_patched);
/*
* If xsaves is enabled, xsaves replaces xsaveopt because
* it supports compact format and supervisor states in addition to
* modified optimization in xsaveopt.
*
* Otherwise, if xsaveopt is enabled, xsaveopt replaces xsave
* because xsaveopt supports modified optimization which is not
* supported by xsave.
*
* If none of xsaves and xsaveopt is enabled, use xsave.
*/
alternative_input_2(
"1:"XSAVE,
XSAVEOPT,
X86_FEATURE_XSAVEOPT,
XSAVES,
X86_FEATURE_XSAVES,
[fx] "D" (fx), "a" (lmask), "d" (hmask) :
"memory");
asm volatile("2:\n\t"
xstate_fault
: "0" (0)
: "memory");
return err;
}
/*
* Restore processor xstate from xsave area.
*/
static inline int xrstor_state(struct xsave_struct *fx, u64 mask)
{
int err = 0;
u32 lmask = mask;
u32 hmask = mask >> 32;
/*
* Use xrstors to restore context if it is enabled. xrstors supports
* compacted format of xsave area which is not supported by xrstor.
*/
alternative_input(
"1: " XRSTOR,
XRSTORS,
X86_FEATURE_XSAVES,
"D" (fx), "m" (*fx), "a" (lmask), "d" (hmask)
: "memory");
asm volatile("2:\n"
xstate_fault
: "0" (0)
: "memory");
return err;
}
/*
* Restore xstate context for new process during context switch.
*/
static inline int fpu_xrstor_checking(struct xsave_struct *fx)
{
return xrstor_state(fx, -1);
}
/*
* Save xstate to user space xsave area.
*
* We don't use modified optimization because xrstor/xrstors might track
* a different application.
*
* We don't use compacted format xsave area for
* backward compatibility for old applications which don't understand
* compacted format of xsave area.
*/
static inline int xsave_user(struct xsave_struct __user *buf)
{
int err;
/*
* Clear the xsave header first, so that reserved fields are
* initialized to zero.
*/
err = __clear_user(&buf->header, sizeof(buf->header));
if (unlikely(err))
return -EFAULT;
__asm__ __volatile__(ASM_STAC "\n"
"1:"XSAVE"\n"
"2: " ASM_CLAC "\n"
xstate_fault
: "D" (buf), "a" (-1), "d" (-1), "0" (0)
: "memory");
return err;
}
/*
* Restore xstate from user space xsave area.
*/
static inline int xrestore_user(struct xsave_struct __user *buf, u64 mask)
{
int err = 0;
struct xsave_struct *xstate = ((__force struct xsave_struct *)buf);
u32 lmask = mask;
u32 hmask = mask >> 32;
__asm__ __volatile__(ASM_STAC "\n"
"1:"XRSTOR"\n"
"2: " ASM_CLAC "\n"
xstate_fault
: "D" (xstate), "a" (lmask), "d" (hmask), "0" (0)
: "memory"); /* memory required? */
return err;
}
void *get_xsave_addr(struct xsave_struct *xsave, int xstate);
void setup_xstate_comp(void);
#endif