linux/drivers/target/target_core_xcopy.c

1037 lines
27 KiB
C
Raw Normal View History

target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
/*******************************************************************************
* Filename: target_core_xcopy.c
*
* This file contains support for SPC-4 Extended-Copy offload with generic
* TCM backends.
*
* Copyright (c) 2011-2013 Datera, Inc. All rights reserved.
*
* Author:
* Nicholas A. Bellinger <nab@daterainc.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
******************************************************************************/
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <linux/configfs.h>
#include <scsi/scsi_proto.h>
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
#include <asm/unaligned.h>
#include <target/target_core_base.h>
#include <target/target_core_backend.h>
#include <target/target_core_fabric.h>
#include "target_core_internal.h"
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
#include "target_core_pr.h"
#include "target_core_ua.h"
#include "target_core_xcopy.h"
static struct workqueue_struct *xcopy_wq = NULL;
static int target_xcopy_gen_naa_ieee(struct se_device *dev, unsigned char *buf)
{
int off = 0;
buf[off++] = (0x6 << 4);
buf[off++] = 0x01;
buf[off++] = 0x40;
buf[off] = (0x5 << 4);
spc_parse_naa_6h_vendor_specific(dev, &buf[off]);
return 0;
}
static int target_xcopy_locate_se_dev_e4(struct se_cmd *se_cmd, struct xcopy_op *xop,
bool src)
{
struct se_device *se_dev;
unsigned char tmp_dev_wwn[XCOPY_NAA_IEEE_REGEX_LEN], *dev_wwn;
int rc;
if (src)
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
dev_wwn = &xop->dst_tid_wwn[0];
else
dev_wwn = &xop->src_tid_wwn[0];
mutex_lock(&g_device_mutex);
list_for_each_entry(se_dev, &g_device_list, g_dev_node) {
if (!se_dev->dev_attrib.emulate_3pc)
continue;
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
memset(&tmp_dev_wwn[0], 0, XCOPY_NAA_IEEE_REGEX_LEN);
target_xcopy_gen_naa_ieee(se_dev, &tmp_dev_wwn[0]);
rc = memcmp(&tmp_dev_wwn[0], dev_wwn, XCOPY_NAA_IEEE_REGEX_LEN);
if (rc != 0)
continue;
if (src) {
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
xop->dst_dev = se_dev;
pr_debug("XCOPY 0xe4: Setting xop->dst_dev: %p from located"
" se_dev\n", xop->dst_dev);
} else {
xop->src_dev = se_dev;
pr_debug("XCOPY 0xe4: Setting xop->src_dev: %p from located"
" se_dev\n", xop->src_dev);
}
rc = target_depend_item(&se_dev->dev_group.cg_item);
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
if (rc != 0) {
pr_err("configfs_depend_item attempt failed:"
" %d for se_dev: %p\n", rc, se_dev);
mutex_unlock(&g_device_mutex);
return rc;
}
pr_debug("Called configfs_depend_item for se_dev: %p"
" se_dev->se_dev_group: %p\n", se_dev,
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
&se_dev->dev_group);
mutex_unlock(&g_device_mutex);
return 0;
}
mutex_unlock(&g_device_mutex);
pr_err("Unable to locate 0xe4 descriptor for EXTENDED_COPY\n");
return -EINVAL;
}
static int target_xcopy_parse_tiddesc_e4(struct se_cmd *se_cmd, struct xcopy_op *xop,
unsigned char *p, bool src)
{
unsigned char *desc = p;
unsigned short ript;
u8 desig_len;
/*
* Extract RELATIVE INITIATOR PORT IDENTIFIER
*/
ript = get_unaligned_be16(&desc[2]);
pr_debug("XCOPY 0xe4: RELATIVE INITIATOR PORT IDENTIFIER: %hu\n", ript);
/*
* Check for supported code set, association, and designator type
*/
if ((desc[4] & 0x0f) != 0x1) {
pr_err("XCOPY 0xe4: code set of non binary type not supported\n");
return -EINVAL;
}
if ((desc[5] & 0x30) != 0x00) {
pr_err("XCOPY 0xe4: association other than LUN not supported\n");
return -EINVAL;
}
if ((desc[5] & 0x0f) != 0x3) {
pr_err("XCOPY 0xe4: designator type unsupported: 0x%02x\n",
(desc[5] & 0x0f));
return -EINVAL;
}
/*
* Check for matching 16 byte length for NAA IEEE Registered Extended
* Assigned designator
*/
desig_len = desc[7];
if (desig_len != 16) {
pr_err("XCOPY 0xe4: invalid desig_len: %d\n", (int)desig_len);
return -EINVAL;
}
pr_debug("XCOPY 0xe4: desig_len: %d\n", (int)desig_len);
/*
* Check for NAA IEEE Registered Extended Assigned header..
*/
if ((desc[8] & 0xf0) != 0x60) {
pr_err("XCOPY 0xe4: Unsupported DESIGNATOR TYPE: 0x%02x\n",
(desc[8] & 0xf0));
return -EINVAL;
}
if (src) {
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
memcpy(&xop->src_tid_wwn[0], &desc[8], XCOPY_NAA_IEEE_REGEX_LEN);
/*
* Determine if the source designator matches the local device
*/
if (!memcmp(&xop->local_dev_wwn[0], &xop->src_tid_wwn[0],
XCOPY_NAA_IEEE_REGEX_LEN)) {
xop->op_origin = XCOL_SOURCE_RECV_OP;
xop->src_dev = se_cmd->se_dev;
pr_debug("XCOPY 0xe4: Set xop->src_dev %p from source"
" received xop\n", xop->src_dev);
}
} else {
memcpy(&xop->dst_tid_wwn[0], &desc[8], XCOPY_NAA_IEEE_REGEX_LEN);
/*
* Determine if the destination designator matches the local device
*/
if (!memcmp(&xop->local_dev_wwn[0], &xop->dst_tid_wwn[0],
XCOPY_NAA_IEEE_REGEX_LEN)) {
xop->op_origin = XCOL_DEST_RECV_OP;
xop->dst_dev = se_cmd->se_dev;
pr_debug("XCOPY 0xe4: Set xop->dst_dev: %p from destination"
" received xop\n", xop->dst_dev);
}
}
return 0;
}
static int target_xcopy_parse_target_descriptors(struct se_cmd *se_cmd,
struct xcopy_op *xop, unsigned char *p,
unsigned short tdll)
{
struct se_device *local_dev = se_cmd->se_dev;
unsigned char *desc = p;
int offset = tdll % XCOPY_TARGET_DESC_LEN, rc, ret = 0;
unsigned short start = 0;
bool src = true;
if (offset != 0) {
pr_err("XCOPY target descriptor list length is not"
" multiple of %d\n", XCOPY_TARGET_DESC_LEN);
return -EINVAL;
}
if (tdll > 64) {
pr_err("XCOPY target descriptor supports a maximum"
" two src/dest descriptors, tdll: %hu too large..\n", tdll);
return -EINVAL;
}
/*
* Generate an IEEE Registered Extended designator based upon the
* se_device the XCOPY was received upon..
*/
memset(&xop->local_dev_wwn[0], 0, XCOPY_NAA_IEEE_REGEX_LEN);
target_xcopy_gen_naa_ieee(local_dev, &xop->local_dev_wwn[0]);
while (start < tdll) {
/*
* Check target descriptor identification with 0xE4 type with
* use VPD 0x83 WWPN matching ..
*/
switch (desc[0]) {
case 0xe4:
rc = target_xcopy_parse_tiddesc_e4(se_cmd, xop,
&desc[0], src);
if (rc != 0)
goto out;
/*
* Assume target descriptors are in source -> destination order..
*/
if (src)
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
src = false;
else
src = true;
start += XCOPY_TARGET_DESC_LEN;
desc += XCOPY_TARGET_DESC_LEN;
ret++;
break;
default:
pr_err("XCOPY unsupported descriptor type code:"
" 0x%02x\n", desc[0]);
goto out;
}
}
if (xop->op_origin == XCOL_SOURCE_RECV_OP)
rc = target_xcopy_locate_se_dev_e4(se_cmd, xop, true);
else
rc = target_xcopy_locate_se_dev_e4(se_cmd, xop, false);
if (rc < 0)
goto out;
pr_debug("XCOPY TGT desc: Source dev: %p NAA IEEE WWN: 0x%16phN\n",
xop->src_dev, &xop->src_tid_wwn[0]);
pr_debug("XCOPY TGT desc: Dest dev: %p NAA IEEE WWN: 0x%16phN\n",
xop->dst_dev, &xop->dst_tid_wwn[0]);
return ret;
out:
return -EINVAL;
}
static int target_xcopy_parse_segdesc_02(struct se_cmd *se_cmd, struct xcopy_op *xop,
unsigned char *p)
{
unsigned char *desc = p;
int dc = (desc[1] & 0x02);
unsigned short desc_len;
desc_len = get_unaligned_be16(&desc[2]);
if (desc_len != 0x18) {
pr_err("XCOPY segment desc 0x02: Illegal desc_len:"
" %hu\n", desc_len);
return -EINVAL;
}
xop->stdi = get_unaligned_be16(&desc[4]);
xop->dtdi = get_unaligned_be16(&desc[6]);
pr_debug("XCOPY seg desc 0x02: desc_len: %hu stdi: %hu dtdi: %hu, DC: %d\n",
desc_len, xop->stdi, xop->dtdi, dc);
xop->nolb = get_unaligned_be16(&desc[10]);
xop->src_lba = get_unaligned_be64(&desc[12]);
xop->dst_lba = get_unaligned_be64(&desc[20]);
pr_debug("XCOPY seg desc 0x02: nolb: %hu src_lba: %llu dst_lba: %llu\n",
xop->nolb, (unsigned long long)xop->src_lba,
(unsigned long long)xop->dst_lba);
if (dc != 0) {
xop->dbl = (desc[29] & 0xff) << 16;
xop->dbl |= (desc[30] & 0xff) << 8;
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
xop->dbl |= desc[31] & 0xff;
pr_debug("XCOPY seg desc 0x02: DC=1 w/ dbl: %u\n", xop->dbl);
}
return 0;
}
static int target_xcopy_parse_segment_descriptors(struct se_cmd *se_cmd,
struct xcopy_op *xop, unsigned char *p,
unsigned int sdll)
{
unsigned char *desc = p;
unsigned int start = 0;
int offset = sdll % XCOPY_SEGMENT_DESC_LEN, rc, ret = 0;
if (offset != 0) {
pr_err("XCOPY segment descriptor list length is not"
" multiple of %d\n", XCOPY_SEGMENT_DESC_LEN);
return -EINVAL;
}
while (start < sdll) {
/*
* Check segment descriptor type code for block -> block
*/
switch (desc[0]) {
case 0x02:
rc = target_xcopy_parse_segdesc_02(se_cmd, xop, desc);
if (rc < 0)
goto out;
ret++;
start += XCOPY_SEGMENT_DESC_LEN;
desc += XCOPY_SEGMENT_DESC_LEN;
break;
default:
pr_err("XCOPY unsupported segment descriptor"
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
"type: 0x%02x\n", desc[0]);
goto out;
}
}
return ret;
out:
return -EINVAL;
}
/*
* Start xcopy_pt ops
*/
struct xcopy_pt_cmd {
bool remote_port;
struct se_cmd se_cmd;
struct xcopy_op *xcopy_op;
struct completion xpt_passthrough_sem;
unsigned char sense_buffer[TRANSPORT_SENSE_BUFFER];
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
};
struct se_portal_group xcopy_pt_tpg;
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
static struct se_session xcopy_pt_sess;
static struct se_node_acl xcopy_pt_nacl;
static char *xcopy_pt_get_fabric_name(void)
{
return "xcopy-pt";
}
static int xcopy_pt_get_cmd_state(struct se_cmd *se_cmd)
{
return 0;
}
static void xcopy_pt_undepend_remotedev(struct xcopy_op *xop)
{
struct se_device *remote_dev;
if (xop->op_origin == XCOL_SOURCE_RECV_OP)
remote_dev = xop->dst_dev;
else
remote_dev = xop->src_dev;
pr_debug("Calling configfs_undepend_item for"
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
" remote_dev: %p remote_dev->dev_group: %p\n",
remote_dev, &remote_dev->dev_group.cg_item);
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
target_undepend_item(&remote_dev->dev_group.cg_item);
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
}
static void xcopy_pt_release_cmd(struct se_cmd *se_cmd)
{
struct xcopy_pt_cmd *xpt_cmd = container_of(se_cmd,
struct xcopy_pt_cmd, se_cmd);
kfree(xpt_cmd);
}
static int xcopy_pt_check_stop_free(struct se_cmd *se_cmd)
{
struct xcopy_pt_cmd *xpt_cmd = container_of(se_cmd,
struct xcopy_pt_cmd, se_cmd);
complete(&xpt_cmd->xpt_passthrough_sem);
return 0;
}
static int xcopy_pt_write_pending(struct se_cmd *se_cmd)
{
return 0;
}
static int xcopy_pt_write_pending_status(struct se_cmd *se_cmd)
{
return 0;
}
static int xcopy_pt_queue_data_in(struct se_cmd *se_cmd)
{
return 0;
}
static int xcopy_pt_queue_status(struct se_cmd *se_cmd)
{
return 0;
}
static const struct target_core_fabric_ops xcopy_pt_tfo = {
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
.get_fabric_name = xcopy_pt_get_fabric_name,
.get_cmd_state = xcopy_pt_get_cmd_state,
.release_cmd = xcopy_pt_release_cmd,
.check_stop_free = xcopy_pt_check_stop_free,
.write_pending = xcopy_pt_write_pending,
.write_pending_status = xcopy_pt_write_pending_status,
.queue_data_in = xcopy_pt_queue_data_in,
.queue_status = xcopy_pt_queue_status,
};
/*
* End xcopy_pt_ops
*/
int target_xcopy_setup_pt(void)
{
xcopy_wq = alloc_workqueue("xcopy_wq", WQ_MEM_RECLAIM, 0);
if (!xcopy_wq) {
pr_err("Unable to allocate xcopy_wq\n");
return -ENOMEM;
}
memset(&xcopy_pt_tpg, 0, sizeof(struct se_portal_group));
INIT_LIST_HEAD(&xcopy_pt_tpg.se_tpg_node);
INIT_LIST_HEAD(&xcopy_pt_tpg.acl_node_list);
INIT_LIST_HEAD(&xcopy_pt_tpg.tpg_sess_list);
xcopy_pt_tpg.se_tpg_tfo = &xcopy_pt_tfo;
memset(&xcopy_pt_nacl, 0, sizeof(struct se_node_acl));
INIT_LIST_HEAD(&xcopy_pt_nacl.acl_list);
INIT_LIST_HEAD(&xcopy_pt_nacl.acl_sess_list);
memset(&xcopy_pt_sess, 0, sizeof(struct se_session));
INIT_LIST_HEAD(&xcopy_pt_sess.sess_list);
INIT_LIST_HEAD(&xcopy_pt_sess.sess_acl_list);
INIT_LIST_HEAD(&xcopy_pt_sess.sess_cmd_list);
spin_lock_init(&xcopy_pt_sess.sess_cmd_lock);
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
xcopy_pt_nacl.se_tpg = &xcopy_pt_tpg;
xcopy_pt_nacl.nacl_sess = &xcopy_pt_sess;
xcopy_pt_sess.se_tpg = &xcopy_pt_tpg;
xcopy_pt_sess.se_node_acl = &xcopy_pt_nacl;
return 0;
}
void target_xcopy_release_pt(void)
{
if (xcopy_wq)
destroy_workqueue(xcopy_wq);
}
static void target_xcopy_setup_pt_port(
struct xcopy_pt_cmd *xpt_cmd,
struct xcopy_op *xop,
bool remote_port)
{
struct se_cmd *ec_cmd = xop->xop_se_cmd;
struct se_cmd *pt_cmd = &xpt_cmd->se_cmd;
if (xop->op_origin == XCOL_SOURCE_RECV_OP) {
/*
* Honor destination port reservations for X-COPY PUSH emulation
* when CDB is received on local source port, and READs blocks to
* WRITE on remote destination port.
*/
if (remote_port) {
xpt_cmd->remote_port = remote_port;
} else {
pt_cmd->se_lun = ec_cmd->se_lun;
pt_cmd->se_dev = ec_cmd->se_dev;
pr_debug("Honoring local SRC port from ec_cmd->se_dev:"
" %p\n", pt_cmd->se_dev);
pt_cmd->se_lun = ec_cmd->se_lun;
pr_debug("Honoring local SRC port from ec_cmd->se_lun: %p\n",
pt_cmd->se_lun);
}
} else {
/*
* Honor source port reservation for X-COPY PULL emulation
* when CDB is received on local desintation port, and READs
* blocks from the remote source port to WRITE on local
* destination port.
*/
if (remote_port) {
xpt_cmd->remote_port = remote_port;
} else {
pt_cmd->se_lun = ec_cmd->se_lun;
pt_cmd->se_dev = ec_cmd->se_dev;
pr_debug("Honoring local DST port from ec_cmd->se_dev:"
" %p\n", pt_cmd->se_dev);
pt_cmd->se_lun = ec_cmd->se_lun;
pr_debug("Honoring local DST port from ec_cmd->se_lun: %p\n",
pt_cmd->se_lun);
}
}
}
static void target_xcopy_init_pt_lun(struct se_device *se_dev,
struct se_cmd *pt_cmd, bool remote_port)
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
{
/*
* Don't allocate + init an pt_cmd->se_lun if honoring local port for
* reservations. The pt_cmd->se_lun pointer will be setup from within
* target_xcopy_setup_pt_port()
*/
if (remote_port) {
pr_debug("Setup emulated se_dev: %p from se_dev\n",
pt_cmd->se_dev);
pt_cmd->se_lun = &se_dev->xcopy_lun;
pt_cmd->se_dev = se_dev;
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
}
pt_cmd->se_cmd_flags |= SCF_SE_LUN_CMD;
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
}
static int target_xcopy_setup_pt_cmd(
struct xcopy_pt_cmd *xpt_cmd,
struct xcopy_op *xop,
struct se_device *se_dev,
unsigned char *cdb,
bool remote_port,
bool alloc_mem)
{
struct se_cmd *cmd = &xpt_cmd->se_cmd;
sense_reason_t sense_rc;
int ret = 0, rc;
/*
* Setup LUN+port to honor reservations based upon xop->op_origin for
* X-COPY PUSH or X-COPY PULL based upon where the CDB was received.
*/
target_xcopy_init_pt_lun(se_dev, cmd, remote_port);
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
xpt_cmd->xcopy_op = xop;
target_xcopy_setup_pt_port(xpt_cmd, xop, remote_port);
cmd->tag = 0;
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
sense_rc = target_setup_cmd_from_cdb(cmd, cdb);
if (sense_rc) {
ret = -EINVAL;
goto out;
}
if (alloc_mem) {
rc = target_alloc_sgl(&cmd->t_data_sg, &cmd->t_data_nents,
cmd->data_length, false);
if (rc < 0) {
ret = rc;
goto out;
}
/*
* Set this bit so that transport_free_pages() allows the
* caller to release SGLs + physical memory allocated by
* transport_generic_get_mem()..
*/
cmd->se_cmd_flags |= SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC;
} else {
/*
* Here the previously allocated SGLs for the internal READ
* are mapped zero-copy to the internal WRITE.
*/
sense_rc = transport_generic_map_mem_to_cmd(cmd,
xop->xop_data_sg, xop->xop_data_nents,
NULL, 0);
if (sense_rc) {
ret = -EINVAL;
goto out;
}
pr_debug("Setup PASSTHROUGH_NOALLOC t_data_sg: %p t_data_nents:"
" %u\n", cmd->t_data_sg, cmd->t_data_nents);
}
return 0;
out:
return ret;
}
static int target_xcopy_issue_pt_cmd(struct xcopy_pt_cmd *xpt_cmd)
{
struct se_cmd *se_cmd = &xpt_cmd->se_cmd;
sense_reason_t sense_rc;
sense_rc = transport_generic_new_cmd(se_cmd);
if (sense_rc)
return -EINVAL;
if (se_cmd->data_direction == DMA_TO_DEVICE)
target_execute_cmd(se_cmd);
wait_for_completion_interruptible(&xpt_cmd->xpt_passthrough_sem);
pr_debug("target_xcopy_issue_pt_cmd(): SCSI status: 0x%02x\n",
se_cmd->scsi_status);
return (se_cmd->scsi_status) ? -EINVAL : 0;
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
}
static int target_xcopy_read_source(
struct se_cmd *ec_cmd,
struct xcopy_op *xop,
struct se_device *src_dev,
sector_t src_lba,
u32 src_sectors)
{
struct xcopy_pt_cmd *xpt_cmd;
struct se_cmd *se_cmd;
u32 length = (src_sectors * src_dev->dev_attrib.block_size);
int rc;
unsigned char cdb[16];
bool remote_port = (xop->op_origin == XCOL_DEST_RECV_OP);
xpt_cmd = kzalloc(sizeof(struct xcopy_pt_cmd), GFP_KERNEL);
if (!xpt_cmd) {
pr_err("Unable to allocate xcopy_pt_cmd\n");
return -ENOMEM;
}
init_completion(&xpt_cmd->xpt_passthrough_sem);
se_cmd = &xpt_cmd->se_cmd;
memset(&cdb[0], 0, 16);
cdb[0] = READ_16;
put_unaligned_be64(src_lba, &cdb[2]);
put_unaligned_be32(src_sectors, &cdb[10]);
pr_debug("XCOPY: Built READ_16: LBA: %llu Sectors: %u Length: %u\n",
(unsigned long long)src_lba, src_sectors, length);
transport_init_se_cmd(se_cmd, &xcopy_pt_tfo, &xcopy_pt_sess, length,
DMA_FROM_DEVICE, 0, &xpt_cmd->sense_buffer[0]);
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
xop->src_pt_cmd = xpt_cmd;
rc = target_xcopy_setup_pt_cmd(xpt_cmd, xop, src_dev, &cdb[0],
remote_port, true);
if (rc < 0) {
transport_generic_free_cmd(se_cmd, 0);
return rc;
}
xop->xop_data_sg = se_cmd->t_data_sg;
xop->xop_data_nents = se_cmd->t_data_nents;
pr_debug("XCOPY-READ: Saved xop->xop_data_sg: %p, num: %u for READ"
" memory\n", xop->xop_data_sg, xop->xop_data_nents);
rc = target_xcopy_issue_pt_cmd(xpt_cmd);
if (rc < 0) {
transport_generic_free_cmd(se_cmd, 0);
return rc;
}
/*
* Clear off the allocated t_data_sg, that has been saved for
* zero-copy WRITE submission reuse in struct xcopy_op..
*/
se_cmd->t_data_sg = NULL;
se_cmd->t_data_nents = 0;
return 0;
}
static int target_xcopy_write_destination(
struct se_cmd *ec_cmd,
struct xcopy_op *xop,
struct se_device *dst_dev,
sector_t dst_lba,
u32 dst_sectors)
{
struct xcopy_pt_cmd *xpt_cmd;
struct se_cmd *se_cmd;
u32 length = (dst_sectors * dst_dev->dev_attrib.block_size);
int rc;
unsigned char cdb[16];
bool remote_port = (xop->op_origin == XCOL_SOURCE_RECV_OP);
xpt_cmd = kzalloc(sizeof(struct xcopy_pt_cmd), GFP_KERNEL);
if (!xpt_cmd) {
pr_err("Unable to allocate xcopy_pt_cmd\n");
return -ENOMEM;
}
init_completion(&xpt_cmd->xpt_passthrough_sem);
se_cmd = &xpt_cmd->se_cmd;
memset(&cdb[0], 0, 16);
cdb[0] = WRITE_16;
put_unaligned_be64(dst_lba, &cdb[2]);
put_unaligned_be32(dst_sectors, &cdb[10]);
pr_debug("XCOPY: Built WRITE_16: LBA: %llu Sectors: %u Length: %u\n",
(unsigned long long)dst_lba, dst_sectors, length);
transport_init_se_cmd(se_cmd, &xcopy_pt_tfo, &xcopy_pt_sess, length,
DMA_TO_DEVICE, 0, &xpt_cmd->sense_buffer[0]);
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
xop->dst_pt_cmd = xpt_cmd;
rc = target_xcopy_setup_pt_cmd(xpt_cmd, xop, dst_dev, &cdb[0],
remote_port, false);
if (rc < 0) {
struct se_cmd *src_cmd = &xop->src_pt_cmd->se_cmd;
/*
* If the failure happened before the t_mem_list hand-off in
* target_xcopy_setup_pt_cmd(), Reset memory + clear flag so that
* core releases this memory on error during X-COPY WRITE I/O.
*/
src_cmd->se_cmd_flags &= ~SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC;
src_cmd->t_data_sg = xop->xop_data_sg;
src_cmd->t_data_nents = xop->xop_data_nents;
transport_generic_free_cmd(se_cmd, 0);
return rc;
}
rc = target_xcopy_issue_pt_cmd(xpt_cmd);
if (rc < 0) {
se_cmd->se_cmd_flags &= ~SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC;
transport_generic_free_cmd(se_cmd, 0);
return rc;
}
return 0;
}
static void target_xcopy_do_work(struct work_struct *work)
{
struct xcopy_op *xop = container_of(work, struct xcopy_op, xop_work);
struct se_device *src_dev = xop->src_dev, *dst_dev = xop->dst_dev;
struct se_cmd *ec_cmd = xop->xop_se_cmd;
sector_t src_lba = xop->src_lba, dst_lba = xop->dst_lba, end_lba;
unsigned int max_sectors;
int rc;
unsigned short nolb = xop->nolb, cur_nolb, max_nolb, copied_nolb = 0;
end_lba = src_lba + nolb;
/*
* Break up XCOPY I/O into hw_max_sectors sized I/O based on the
* smallest max_sectors between src_dev + dev_dev, or
*/
max_sectors = min(src_dev->dev_attrib.hw_max_sectors,
dst_dev->dev_attrib.hw_max_sectors);
max_sectors = min_t(u32, max_sectors, XCOPY_MAX_SECTORS);
max_nolb = min_t(u16, max_sectors, ((u16)(~0U)));
pr_debug("target_xcopy_do_work: nolb: %hu, max_nolb: %hu end_lba: %llu\n",
nolb, max_nolb, (unsigned long long)end_lba);
pr_debug("target_xcopy_do_work: Starting src_lba: %llu, dst_lba: %llu\n",
(unsigned long long)src_lba, (unsigned long long)dst_lba);
while (src_lba < end_lba) {
cur_nolb = min(nolb, max_nolb);
pr_debug("target_xcopy_do_work: Calling read src_dev: %p src_lba: %llu,"
" cur_nolb: %hu\n", src_dev, (unsigned long long)src_lba, cur_nolb);
rc = target_xcopy_read_source(ec_cmd, xop, src_dev, src_lba, cur_nolb);
if (rc < 0)
goto out;
src_lba += cur_nolb;
pr_debug("target_xcopy_do_work: Incremented READ src_lba to %llu\n",
(unsigned long long)src_lba);
pr_debug("target_xcopy_do_work: Calling write dst_dev: %p dst_lba: %llu,"
" cur_nolb: %hu\n", dst_dev, (unsigned long long)dst_lba, cur_nolb);
rc = target_xcopy_write_destination(ec_cmd, xop, dst_dev,
dst_lba, cur_nolb);
if (rc < 0) {
transport_generic_free_cmd(&xop->src_pt_cmd->se_cmd, 0);
goto out;
}
dst_lba += cur_nolb;
pr_debug("target_xcopy_do_work: Incremented WRITE dst_lba to %llu\n",
(unsigned long long)dst_lba);
copied_nolb += cur_nolb;
nolb -= cur_nolb;
transport_generic_free_cmd(&xop->src_pt_cmd->se_cmd, 0);
xop->dst_pt_cmd->se_cmd.se_cmd_flags &= ~SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC;
transport_generic_free_cmd(&xop->dst_pt_cmd->se_cmd, 0);
}
xcopy_pt_undepend_remotedev(xop);
kfree(xop);
pr_debug("target_xcopy_do_work: Final src_lba: %llu, dst_lba: %llu\n",
(unsigned long long)src_lba, (unsigned long long)dst_lba);
pr_debug("target_xcopy_do_work: Blocks copied: %hu, Bytes Copied: %u\n",
copied_nolb, copied_nolb * dst_dev->dev_attrib.block_size);
pr_debug("target_xcopy_do_work: Setting X-COPY GOOD status -> sending response\n");
target_complete_cmd(ec_cmd, SAM_STAT_GOOD);
return;
out:
xcopy_pt_undepend_remotedev(xop);
kfree(xop);
pr_warn("target_xcopy_do_work: Setting X-COPY CHECK_CONDITION -> sending response\n");
ec_cmd->scsi_status = SAM_STAT_CHECK_CONDITION;
target_complete_cmd(ec_cmd, SAM_STAT_CHECK_CONDITION);
}
sense_reason_t target_do_xcopy(struct se_cmd *se_cmd)
{
struct se_device *dev = se_cmd->se_dev;
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
struct xcopy_op *xop = NULL;
unsigned char *p = NULL, *seg_desc;
unsigned int list_id, list_id_usage, sdll, inline_dl, sa;
sense_reason_t ret = TCM_INVALID_PARAMETER_LIST;
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
int rc;
unsigned short tdll;
if (!dev->dev_attrib.emulate_3pc) {
pr_err("EXTENDED_COPY operation explicitly disabled\n");
return TCM_UNSUPPORTED_SCSI_OPCODE;
}
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
sa = se_cmd->t_task_cdb[1] & 0x1f;
if (sa != 0x00) {
pr_err("EXTENDED_COPY(LID4) not supported\n");
return TCM_UNSUPPORTED_SCSI_OPCODE;
}
xop = kzalloc(sizeof(struct xcopy_op), GFP_KERNEL);
if (!xop) {
pr_err("Unable to allocate xcopy_op\n");
return TCM_OUT_OF_RESOURCES;
}
xop->xop_se_cmd = se_cmd;
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
p = transport_kmap_data_sg(se_cmd);
if (!p) {
pr_err("transport_kmap_data_sg() failed in target_do_xcopy\n");
kfree(xop);
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
return TCM_OUT_OF_RESOURCES;
}
list_id = p[0];
list_id_usage = (p[1] & 0x18) >> 3;
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
/*
* Determine TARGET DESCRIPTOR LIST LENGTH + SEGMENT DESCRIPTOR LIST LENGTH
*/
tdll = get_unaligned_be16(&p[2]);
sdll = get_unaligned_be32(&p[8]);
inline_dl = get_unaligned_be32(&p[12]);
if (inline_dl != 0) {
pr_err("XCOPY with non zero inline data length\n");
goto out;
}
pr_debug("Processing XCOPY with list_id: 0x%02x list_id_usage: 0x%02x"
" tdll: %hu sdll: %u inline_dl: %u\n", list_id, list_id_usage,
tdll, sdll, inline_dl);
rc = target_xcopy_parse_target_descriptors(se_cmd, xop, &p[16], tdll);
if (rc <= 0)
goto out;
if (xop->src_dev->dev_attrib.block_size !=
xop->dst_dev->dev_attrib.block_size) {
pr_err("XCOPY: Non matching src_dev block_size: %u + dst_dev"
" block_size: %u currently unsupported\n",
xop->src_dev->dev_attrib.block_size,
xop->dst_dev->dev_attrib.block_size);
xcopy_pt_undepend_remotedev(xop);
ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
goto out;
}
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
pr_debug("XCOPY: Processed %d target descriptors, length: %u\n", rc,
rc * XCOPY_TARGET_DESC_LEN);
seg_desc = &p[16];
seg_desc += (rc * XCOPY_TARGET_DESC_LEN);
rc = target_xcopy_parse_segment_descriptors(se_cmd, xop, seg_desc, sdll);
if (rc <= 0) {
xcopy_pt_undepend_remotedev(xop);
goto out;
}
transport_kunmap_data_sg(se_cmd);
pr_debug("XCOPY: Processed %d segment descriptors, length: %u\n", rc,
rc * XCOPY_SEGMENT_DESC_LEN);
INIT_WORK(&xop->xop_work, target_xcopy_do_work);
queue_work(xcopy_wq, &xop->xop_work);
return TCM_NO_SENSE;
out:
if (p)
transport_kunmap_data_sg(se_cmd);
kfree(xop);
return ret;
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 06:38:55 +08:00
}
static sense_reason_t target_rcr_operating_parameters(struct se_cmd *se_cmd)
{
unsigned char *p;
p = transport_kmap_data_sg(se_cmd);
if (!p) {
pr_err("transport_kmap_data_sg failed in"
" target_rcr_operating_parameters\n");
return TCM_OUT_OF_RESOURCES;
}
if (se_cmd->data_length < 54) {
pr_err("Receive Copy Results Op Parameters length"
" too small: %u\n", se_cmd->data_length);
transport_kunmap_data_sg(se_cmd);
return TCM_INVALID_CDB_FIELD;
}
/*
* Set SNLID=1 (Supports no List ID)
*/
p[4] = 0x1;
/*
* MAXIMUM TARGET DESCRIPTOR COUNT
*/
put_unaligned_be16(RCR_OP_MAX_TARGET_DESC_COUNT, &p[8]);
/*
* MAXIMUM SEGMENT DESCRIPTOR COUNT
*/
put_unaligned_be16(RCR_OP_MAX_SG_DESC_COUNT, &p[10]);
/*
* MAXIMUM DESCRIPTOR LIST LENGTH
*/
put_unaligned_be32(RCR_OP_MAX_DESC_LIST_LEN, &p[12]);
/*
* MAXIMUM SEGMENT LENGTH
*/
put_unaligned_be32(RCR_OP_MAX_SEGMENT_LEN, &p[16]);
/*
* MAXIMUM INLINE DATA LENGTH for SA 0x04 (NOT SUPPORTED)
*/
put_unaligned_be32(0x0, &p[20]);
/*
* HELD DATA LIMIT
*/
put_unaligned_be32(0x0, &p[24]);
/*
* MAXIMUM STREAM DEVICE TRANSFER SIZE
*/
put_unaligned_be32(0x0, &p[28]);
/*
* TOTAL CONCURRENT COPIES
*/
put_unaligned_be16(RCR_OP_TOTAL_CONCURR_COPIES, &p[34]);
/*
* MAXIMUM CONCURRENT COPIES
*/
p[36] = RCR_OP_MAX_CONCURR_COPIES;
/*
* DATA SEGMENT GRANULARITY (log 2)
*/
p[37] = RCR_OP_DATA_SEG_GRAN_LOG2;
/*
* INLINE DATA GRANULARITY log 2)
*/
p[38] = RCR_OP_INLINE_DATA_GRAN_LOG2;
/*
* HELD DATA GRANULARITY
*/
p[39] = RCR_OP_HELD_DATA_GRAN_LOG2;
/*
* IMPLEMENTED DESCRIPTOR LIST LENGTH
*/
p[43] = 0x2;
/*
* List of implemented descriptor type codes (ordered)
*/
p[44] = 0x02; /* Copy Block to Block device */
p[45] = 0xe4; /* Identification descriptor target descriptor */
/*
* AVAILABLE DATA (n-3)
*/
put_unaligned_be32(42, &p[0]);
transport_kunmap_data_sg(se_cmd);
target_complete_cmd(se_cmd, GOOD);
return TCM_NO_SENSE;
}
sense_reason_t target_do_receive_copy_results(struct se_cmd *se_cmd)
{
unsigned char *cdb = &se_cmd->t_task_cdb[0];
int sa = (cdb[1] & 0x1f), list_id = cdb[2];
sense_reason_t rc = TCM_NO_SENSE;
pr_debug("Entering target_do_receive_copy_results: SA: 0x%02x, List ID:"
" 0x%02x, AL: %u\n", sa, list_id, se_cmd->data_length);
if (list_id != 0) {
pr_err("Receive Copy Results with non zero list identifier"
" not supported\n");
return TCM_INVALID_CDB_FIELD;
}
switch (sa) {
case RCR_SA_OPERATING_PARAMETERS:
rc = target_rcr_operating_parameters(se_cmd);
break;
case RCR_SA_COPY_STATUS:
case RCR_SA_RECEIVE_DATA:
case RCR_SA_FAILED_SEGMENT_DETAILS:
default:
pr_err("Unsupported SA for receive copy results: 0x%02x\n", sa);
return TCM_INVALID_CDB_FIELD;
}
return rc;
}