linux/drivers/gpu/drm/Makefile

72 lines
2.5 KiB
Makefile
Raw Normal View History

#
# Makefile for the drm device driver. This driver provides support for the
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
ccflags-y := -Iinclude/drm
drm-y := drm_auth.o drm_bufs.o drm_cache.o \
drm_context.o drm_dma.o \
drm_fops.o drm_gem.o drm_ioctl.o drm_irq.o \
drm_lock.o drm_memory.o drm_drv.o drm_vm.o \
drm_agpsupport.o drm_scatter.o drm_pci.o \
drm_platform.o drm_sysfs.o drm_hashtab.o drm_mm.o \
drm_crtc.o drm_modes.o drm_edid.o \
drm_info.o drm_debugfs.o drm_encoder_slave.o \
drm_trace_points.o drm_global.o drm_prime.o \
drm_rect.o drm_vma_manager.o drm_flip_work.o \
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-21 00:38:44 +08:00
drm_modeset_lock.o drm_atomic.o drm_bridge.o
drm-$(CONFIG_COMPAT) += drm_ioc32.o
drm-$(CONFIG_DRM_GEM_CMA_HELPER) += drm_gem_cma_helper.o
drm-$(CONFIG_PCI) += ati_pcigart.o
drm-$(CONFIG_DRM_PANEL) += drm_panel.o
drm-$(CONFIG_OF) += drm_of.o
drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
drm: Add atomic/plane helpers This is the first cut of atomic helper code. As-is it's only useful to implement a pure atomic interface for plane updates. Later patches will integrate this with the crtc helpers so that full atomic updates are possible. We also need a pile of helpers to aid drivers in transitioning from the legacy world to the shiny new atomic age. Finally we need helpers to implement legacy ioctls on top of the atomic interface. The design of the overall helpers<->driver interaction is fairly simple, but has an unfortunate large interface: - We have ->atomic_check callbacks for crtcs and planes. The idea is that connectors don't need any checking, and if they do they can adjust the relevant crtc driver-private state. So no connector hooks should be needed. Also the crtc helpers integration will do the ->best_encoder checks, so no need for that. - Framebuffer pinning needs to be done before we can commit to the hw state. This is especially important for async updates where we must pin all buffers before returning to userspace, so that really only hw failures can happen in the asynchronous worker. Hence we add ->prepare_fb and ->cleanup_fb hooks for this resources management. - The actual atomic plane commit can't fail (except hw woes), so has void return type. It has three stages: 1. Prepare all affected crtcs with crtc->atomic_begin. Drivers can use this to unset the GO bit or similar latches to prevent plane updates. 2. Update plane state by looping over all changed planes and calling plane->atomic_update. Presuming the hardware is sane and has GO bits drivers can simply bash the state into the hardware in this function. Other drivers might use this to precompute hw state for the final step. 3. Finally latch the update for the next vblank with crtc->atomic_flush. Note that this function doesn't need to wait for the vblank to happen even for the synchronous case. v2: Clear drm_<obj>_state->state to NULL when swapping in state. v3: Add TODO that we don't short-circuit plane updates for now. Likely no one will care. v4: Squash in a bit of polish that somehow landed in the wrong (later) patche. v5: Integrate atomic functions into the drm docbook and fixup the kerneldoc. v6: Fixup fixup patch squashing fumble. v7: Don't touch the legacy plane state plane->fb and plane->crtc. This is only used by the legacy ioctl code in the drm core, and that code already takes care of updating the pointers in all relevant cases. This is in stark contrast to connector->encoder->crtc links on the modeset side, which we still need to set since the core doesn't touch them. Also some more kerneldoc polish. v8: Drop outdated comment. v9: Handle the state->state pointer correctly: Only clearing the ->state pointer when assigning the state to the kms object isn't good enough. We also need to re-link the swapped out state into the drm_atomic_state structure. v10: Shuffle the misplaced docbook template hunk around that Sean spotted. Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 07:14:14 +08:00
drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o
drm: allow loading an EDID as firmware to override broken monitor Broken monitors and/or broken graphic boards may send erroneous or no EDID data. This also applies to broken KVM devices that are unable to correctly forward the EDID data of the connected monitor but invent their own fantasy data. This patch allows to specify an EDID data set to be used instead of probing the monitor for it. It contains built-in data sets of frequently used screen resolutions. In addition, a particular EDID data set may be provided in the /lib/firmware directory and loaded via the firmware interface. The name is passed to the kernel as module parameter of the drm_kms_helper module either when loaded options drm_kms_helper edid_firmware=edid/1280x1024.bin or as kernel commandline parameter drm_kms_helper.edid_firmware=edid/1280x1024.bin It is also possible to restrict the usage of a specified EDID data set to a particular connector. This is done by prepending the name of the connector to the name of the EDID data set using the syntax edid_firmware=[<connector>:]<edid> such as, for example, edid_firmware=DVI-I-1:edid/1920x1080.bin in which case no other connector will be affected. The built-in data sets are Resolution Name -------------------------------- 1024x768 edid/1024x768.bin 1280x1024 edid/1280x1024.bin 1680x1050 edid/1680x1050.bin 1920x1080 edid/1920x1080.bin They are ignored, if a file with the same name is available in the /lib/firmware directory. The built-in EDID data sets are based on standard timings that may not apply to a particular monitor and even crash it. Ideally, EDID data of the connected monitor should be used. They may be obtained through the drm/cardX/cardX-<connector>/edid entry in the /sys/devices PCI directory of a correctly working graphics adapter. It is even possible to specify the name of an EDID data set on-the-fly via the /sys/module interface, e.g. echo edid/myedid.bin >/sys/module/drm_kms_helper/parameters/edid_firmware The new screen mode is considered when the related kernel function is called for the first time after the change. Such calls are made when the X server is started or when the display settings dialog is opened in an already running X server. Signed-off-by: Carsten Emde <C.Emde@osadl.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-19 05:37:33 +08:00
drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
drm_kms_helper-$(CONFIG_DRM_KMS_FB_HELPER) += drm_fb_helper.o
drm_kms_helper-$(CONFIG_DRM_KMS_CMA_HELPER) += drm_fb_cma_helper.o
obj-$(CONFIG_DRM_KMS_HELPER) += drm_kms_helper.o
CFLAGS_drm_trace_points.o := -I$(src)
obj-$(CONFIG_DRM) += drm.o
obj-$(CONFIG_DRM_MIPI_DSI) += drm_mipi_dsi.o
obj-$(CONFIG_DRM_TTM) += ttm/
obj-$(CONFIG_DRM_TDFX) += tdfx/
obj-$(CONFIG_DRM_R128) += r128/
obj-$(CONFIG_HSA_AMD) += amd/amdkfd/
obj-$(CONFIG_DRM_RADEON)+= radeon/
obj-$(CONFIG_DRM_MGA) += mga/
obj-$(CONFIG_DRM_I810) += i810/
obj-$(CONFIG_DRM_I915) += i915/
obj-$(CONFIG_DRM_MGAG200) += mgag200/
obj-$(CONFIG_DRM_CIRRUS_QEMU) += cirrus/
obj-$(CONFIG_DRM_SIS) += sis/
obj-$(CONFIG_DRM_SAVAGE)+= savage/
obj-$(CONFIG_DRM_VMWGFX)+= vmwgfx/
obj-$(CONFIG_DRM_VIA) +=via/
obj-$(CONFIG_DRM_NOUVEAU) +=nouveau/
DRM: add DRM Driver for Samsung SoC EXYNOS4210. This patch is a DRM Driver for Samsung SoC Exynos4210 and now enables only FIMD yet but we will add HDMI support also in the future. this patch is based on git repository below: git://people.freedesktop.org/~airlied/linux.git branch name: drm-next commit-id: 88ef4e3f4f616462b78a7838eb3ffc3818d30f67 you can refer to our working repository below: http://git.infradead.org/users/kmpark/linux-2.6-samsung branch name: samsung-drm We tried to re-use lowlevel codes of the FIMD driver(s3c-fb.c based on Linux framebuffer) but couldn't so because lowlevel codes of s3c-fb.c are included internally and so FIMD module of this driver has its own lowlevel codes. We used GEM framework for buffer management and DMA APIs(dma_alloc_*) for buffer allocation so we can allocate physically continuous memory for DMA through it and also we could use CMA later if CMA is applied to mainline. Refer to this link for CMA(Continuous Memory Allocator): http://lkml.org/lkml/2011/7/20/45 this driver supports only physically continuous memory(non-iommu). Links to previous versions of the patchset: v1: < https://lwn.net/Articles/454380/ > v2: < http://www.spinics.net/lists/kernel/msg1224275.html > v3: < http://www.spinics.net/lists/dri-devel/msg13755.html > v4: < http://permalink.gmane.org/gmane.comp.video.dri.devel/60439 > v5: < http://comments.gmane.org/gmane.comp.video.dri.devel/60802 > Changelog v2: DRM: add DRM_IOCTL_SAMSUNG_GEM_MMAP ioctl command. this feature maps user address space to physical memory region once user application requests DRM_IOCTL_SAMSUNG_GEM_MMAP ioctl. DRM: code clean and add exception codes. Changelog v3: DRM: Support multiple irq. FIMD and HDMI have their own irq handler but DRM Framework can regiter only one irq handler this patch supports mutiple irq for Samsung SoC. DRM: Consider modularization. each DRM, FIMD could be built as a module. DRM: Have indenpendent crtc object. crtc isn't specific to SoC Platform so this patch gets a crtc to be used as common object. created crtc could be attached to any encoder object. DRM: code clean and add exception codes. Changelog v4: DRM: remove is_defult from samsung_fb. is_default isn't used for default framebuffer. DRM: code refactoring to fimd module. this patch is be considered with multiple display objects and would use its own request_irq() to register a irq handler instead of drm framework's one. DRM: remove find_samsung_drm_gem_object() DRM: move kernel private data structures and definitions to driver folder. samsung_drm.h would contain only public information for userspace ioctl interface. DRM: code refactoring to gem modules. buffer module isn't dependent of gem module anymore. DRM: fixed security issue. DRM: remove encoder porinter from specific connector. samsung connector doesn't need to have generic encoder. DRM: code clean and add exception codes. Changelog v5: DRM: updated fimd(display controller) driver. added various pixel formats, color key and pixel blending features. DRM: removed end_buf_off from samsung_drm_overlay structure. this variable isn't used and end buffer address would be calculated by each sub driver. DRM: use generic function for mmap_offset. replaced samsung_drm_gem_create_mmap_offset() and samsung_drm_free_mmap_offset() with generic ones applied to mainline recentrly. DRM: removed unnecessary codes and added exception codes. DRM: added comments and code clean. Changelog v6: DRM: added default config options. DRM: added padding for 64-bit align. DRM: changed prefix 'samsung' to 'exynos' Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-04 18:19:01 +08:00
obj-$(CONFIG_DRM_EXYNOS) +=exynos/
obj-$(CONFIG_DRM_ROCKCHIP) +=rockchip/
obj-$(CONFIG_DRM_GMA500) += gma500/
obj-$(CONFIG_DRM_UDL) += udl/
obj-$(CONFIG_DRM_AST) += ast/
obj-$(CONFIG_DRM_ARMADA) += armada/
obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel-hlcdc/
obj-$(CONFIG_DRM_RCAR_DU) += rcar-du/
obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
obj-$(CONFIG_DRM_OMAP) += omapdrm/
obj-$(CONFIG_DRM_TILCDC) += tilcdc/
obj-$(CONFIG_DRM_QXL) += qxl/
obj-$(CONFIG_DRM_BOCHS) += bochs/
obj-$(CONFIG_DRM_MSM) += msm/
obj-$(CONFIG_DRM_TEGRA) += tegra/
obj-$(CONFIG_DRM_STI) += sti/
obj-$(CONFIG_DRM_IMX) += imx/
obj-y += i2c/
obj-y += panel/
obj-y += bridge/