openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/arm/boot/dts/rk3288-firefly-reload.dts

421 lines
9.7 KiB
Plaintext
Raw Normal View History

ARM: dts: rockchip: add rk3288-firefly-reload The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-18 23:32:32 +08:00
/*
* Device tree file for Firefly Rockchip RK3288 Core board
* Copyright (c) 2016 Randy Li <ayaka@soulik.info>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "rk3288-firefly-reload-core.dtsi"
/ {
model = "Firefly-RK3288-reload";
compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288";
ARM: dts: rockchip: add adc button for Firefly The only adc button connected to adc input is recovery button. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-05-30 23:52:46 +08:00
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 1>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
button-recovery {
label = "Recovery";
linux,code = <KEY_VENDOR>;
press-threshold-microvolt = <0>;
};
};
ARM: dts: rockchip: add rk3288-firefly-reload The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-18 23:32:32 +08:00
gpio-keys {
compatible = "gpio-keys";
power {
wakeup-source;
ARM: dts: rockchip: use pin constants to describe gpios Use macros to describe gpios will make the dts easier to read and write. All the modifications done with sed: sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* ....... ....... sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* Tested with: for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [also adapted the gpio interrupts] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-22 20:54:55 +08:00
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
ARM: dts: rockchip: add rk3288-firefly-reload The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-18 23:32:32 +08:00
label = "GPIO Power";
linux,code = <KEY_POWER>;
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
};
};
ir-receiver {
compatible = "gpio-ir-receiver";
ARM: dts: rockchip: use pin constants to describe gpios Use macros to describe gpios will make the dts easier to read and write. All the modifications done with sed: sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* ....... ....... sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* Tested with: for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [also adapted the gpio interrupts] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-22 20:54:55 +08:00
gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
ARM: dts: rockchip: add rk3288-firefly-reload The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-18 23:32:32 +08:00
};
leds {
compatible = "gpio-leds";
power {
ARM: dts: rockchip: use pin constants to describe gpios Use macros to describe gpios will make the dts easier to read and write. All the modifications done with sed: sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* ....... ....... sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* Tested with: for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [also adapted the gpio interrupts] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-22 20:54:55 +08:00
gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
ARM: dts: rockchip: add rk3288-firefly-reload The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-18 23:32:32 +08:00
label = "firefly:blue:power";
pinctrl-names = "default";
pinctrl-0 = <&power_led>;
panic-indicator;
};
work {
ARM: dts: rockchip: use pin constants to describe gpios Use macros to describe gpios will make the dts easier to read and write. All the modifications done with sed: sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* ....... ....... sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* Tested with: for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [also adapted the gpio interrupts] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-22 20:54:55 +08:00
gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
ARM: dts: rockchip: add rk3288-firefly-reload The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-18 23:32:32 +08:00
label = "firefly:blue:user";
linux,default-trigger = "rc-feedback";
pinctrl-names = "default";
pinctrl-0 = <&work_led>;
};
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&hym8563>;
clock-names = "ext_clock";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable>;
ARM: dts: rockchip: use pin constants to describe gpios Use macros to describe gpios will make the dts easier to read and write. All the modifications done with sed: sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* ....... ....... sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* Tested with: for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [also adapted the gpio interrupts] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-22 20:54:55 +08:00
reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
ARM: dts: rockchip: add rk3288-firefly-reload The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-18 23:32:32 +08:00
};
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "SPDIF";
simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */
cpu { sound-dai = <&spdif>; };
codec { sound-dai = <&spdif_out>; };
};
};
spdif_out: spdif-out {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
};
vcc_host_5v: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
ARM: dts: rockchip: use pin constants to describe gpios Use macros to describe gpios will make the dts easier to read and write. All the modifications done with sed: sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* ....... ....... sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* Tested with: for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [also adapted the gpio interrupts] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-22 20:54:55 +08:00
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
ARM: dts: rockchip: add rk3288-firefly-reload The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-18 23:32:32 +08:00
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&vcc_5v>;
};
ARM: dts: rockchip: add missing regulators for firefly reload board There are many regulators are missed in previous commit, this commit complete most of them. It also fix some mistakes in the regulator properties. The VDD_10(REG10) and VCC_18(REG11) had better to keep in always-on state, as it is used as the USB PHY supply, corretly we have no way to assign power supply to a USB PHY. The VCCA_33(REG8) should be enabled or the GMAC won't work. It also fix the wrong properties for audio in io-domains, the supply connected to APIO4_VDD is different to firefly release version. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-18 01:03:11 +08:00
vcc_5v: vcc_sys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
ARM: dts: rockchip: add rk3288-firefly-reload The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-18 23:32:32 +08:00
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
ARM: dts: rockchip: use pin constants to describe gpios Use macros to describe gpios will make the dts easier to read and write. All the modifications done with sed: sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* ....... ....... sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* Tested with: for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [also adapted the gpio interrupts] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-22 20:54:55 +08:00
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
ARM: dts: rockchip: add rk3288-firefly-reload The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-18 23:32:32 +08:00
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
vcc_otg_5v: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
ARM: dts: rockchip: use pin constants to describe gpios Use macros to describe gpios will make the dts easier to read and write. All the modifications done with sed: sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* ....... ....... sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* Tested with: for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [also adapted the gpio interrupts] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-22 20:54:55 +08:00
gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
ARM: dts: rockchip: add rk3288-firefly-reload The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-18 23:32:32 +08:00
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&vcc_5v>;
};
ARM: dts: rockchip: add missing regulators for firefly reload board There are many regulators are missed in previous commit, this commit complete most of them. It also fix some mistakes in the regulator properties. The VDD_10(REG10) and VCC_18(REG11) had better to keep in always-on state, as it is used as the USB PHY supply, corretly we have no way to assign power supply to a USB PHY. The VCCA_33(REG8) should be enabled or the GMAC won't work. It also fix the wrong properties for audio in io-domains, the supply connected to APIO4_VDD is different to firefly release version. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-18 01:03:11 +08:00
dovdd_1v8: dovdd-1v8-regulator {
compatible = "regulator-fixed";
enable-active-high;
ARM: dts: rockchip: use pin constants to describe gpios Use macros to describe gpios will make the dts easier to read and write. All the modifications done with sed: sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* ....... ....... sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* Tested with: for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [also adapted the gpio interrupts] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-22 20:54:55 +08:00
gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
ARM: dts: rockchip: add missing regulators for firefly reload board There are many regulators are missed in previous commit, this commit complete most of them. It also fix some mistakes in the regulator properties. The VDD_10(REG10) and VCC_18(REG11) had better to keep in always-on state, as it is used as the USB PHY supply, corretly we have no way to assign power supply to a USB PHY. The VCCA_33(REG8) should be enabled or the GMAC won't work. It also fix the wrong properties for audio in io-domains, the supply connected to APIO4_VDD is different to firefly release version. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-18 01:03:11 +08:00
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "dovdd_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_io>;
};
ARM: dts: rockchip: add rk3288-firefly-reload The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-18 23:32:32 +08:00
vcc28_dvp: vcc28-dvp-regulator {
compatible = "regulator-fixed";
enable-active-high;
ARM: dts: rockchip: use pin constants to describe gpios Use macros to describe gpios will make the dts easier to read and write. All the modifications done with sed: sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* ....... ....... sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* Tested with: for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [also adapted the gpio interrupts] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-22 20:54:55 +08:00
gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
ARM: dts: rockchip: add rk3288-firefly-reload The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-18 23:32:32 +08:00
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "vcc28_dvp";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
ARM: dts: rockchip: add missing regulators for firefly reload board There are many regulators are missed in previous commit, this commit complete most of them. It also fix some mistakes in the regulator properties. The VDD_10(REG10) and VCC_18(REG11) had better to keep in always-on state, as it is used as the USB PHY supply, corretly we have no way to assign power supply to a USB PHY. The VCCA_33(REG8) should be enabled or the GMAC won't work. It also fix the wrong properties for audio in io-domains, the supply connected to APIO4_VDD is different to firefly release version. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-18 01:03:11 +08:00
vin-supply = <&vcc_io>;
};
af_28: af_28-regulator {
compatible = "regulator-fixed";
enable-active-high;
ARM: dts: rockchip: use pin constants to describe gpios Use macros to describe gpios will make the dts easier to read and write. All the modifications done with sed: sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* ....... ....... sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* Tested with: for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [also adapted the gpio interrupts] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-22 20:54:55 +08:00
gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
ARM: dts: rockchip: add missing regulators for firefly reload board There are many regulators are missed in previous commit, this commit complete most of them. It also fix some mistakes in the regulator properties. The VDD_10(REG10) and VCC_18(REG11) had better to keep in always-on state, as it is used as the USB PHY supply, corretly we have no way to assign power supply to a USB PHY. The VCCA_33(REG8) should be enabled or the GMAC won't work. It also fix the wrong properties for audio in io-domains, the supply connected to APIO4_VDD is different to firefly release version. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-18 01:03:11 +08:00
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "af_28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
vin-supply = <&vcc_io>;
};
dvdd_1v2: af_28-regulator {
compatible = "regulator-fixed";
enable-active-high;
ARM: dts: rockchip: use pin constants to describe gpios Use macros to describe gpios will make the dts easier to read and write. All the modifications done with sed: sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* ....... ....... sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* Tested with: for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [also adapted the gpio interrupts] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-22 20:54:55 +08:00
gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>;
ARM: dts: rockchip: add missing regulators for firefly reload board There are many regulators are missed in previous commit, this commit complete most of them. It also fix some mistakes in the regulator properties. The VDD_10(REG10) and VCC_18(REG11) had better to keep in always-on state, as it is used as the USB PHY supply, corretly we have no way to assign power supply to a USB PHY. The VCCA_33(REG8) should be enabled or the GMAC won't work. It also fix the wrong properties for audio in io-domains, the supply connected to APIO4_VDD is different to firefly release version. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-18 01:03:11 +08:00
pinctrl-names = "default";
pinctrl-0 = <&cif_pwr>;
regulator-name = "dvdd_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
vin-supply = <&vcc_io>;
};
vbat_wl: wifi-regulator {
compatible = "regulator-fixed";
regulator-name = "vbat_wl";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
ARM: dts: rockchip: add rk3288-firefly-reload The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-18 23:32:32 +08:00
vin-supply = <&vcc_io>;
};
};
&i2c0 {
hym8563: hym8563@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "xin32k";
interrupt-parent = <&gpio7>;
ARM: dts: rockchip: use pin constants to describe gpios Use macros to describe gpios will make the dts easier to read and write. All the modifications done with sed: sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* ....... ....... sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* Tested with: for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [also adapted the gpio interrupts] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-22 20:54:55 +08:00
interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
ARM: dts: rockchip: add rk3288-firefly-reload The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-18 23:32:32 +08:00
pinctrl-names = "default";
pinctrl-0 = <&rtc_int>;
};
};
&i2c2 {
status = "okay";
codec: es8328@10 {
compatible = "everest,es8328";
DVDD-supply = <&vcca_33>;
AVDD-supply = <&vcca_33>;
PVDD-supply = <&vcca_33>;
HPVDD-supply = <&vcca_33>;
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
clock-names = "i2s_hclk", "i2s_clk";
reg = <0x10>;
};
};
&i2s {
status = "okay";
};
ARM: dts: rockchip: add adc button for Firefly The only adc button connected to adc input is recovery button. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-05-30 23:52:46 +08:00
&saradc {
status = "okay";
};
ARM: dts: rockchip: add rk3288-firefly-reload The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-18 23:32:32 +08:00
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
card-detect-delay = <200>;
disable-wp;
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
vmmc-supply = <&vcc_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&sdio0 {
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-ddr50;
vmmc-supply = <&vbat_wl>;
vqmmc-supply = <&vccio_wl>;
status = "okay";
};
&spdif {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&usbphy {
status = "okay";
};
&usb_host1 {
pinctrl-names = "default";
pinctrl-0 = <&usbhub_rst>;
status = "okay";
};
&usb_otg {
status = "okay";
};
&pinctrl {
ir {
ir_int: ir-int {
rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
dvp {
dvp_pwr: dvp-pwr {
rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
};
ARM: dts: rockchip: add missing regulators for firefly reload board There are many regulators are missed in previous commit, this commit complete most of them. It also fix some mistakes in the regulator properties. The VDD_10(REG10) and VCC_18(REG11) had better to keep in always-on state, as it is used as the USB PHY supply, corretly we have no way to assign power supply to a USB PHY. The VCCA_33(REG8) should be enabled or the GMAC won't work. It also fix the wrong properties for audio in io-domains, the supply connected to APIO4_VDD is different to firefly release version. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-18 01:03:11 +08:00
cif_pwr: cif-pwr {
rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_none>;
};
ARM: dts: rockchip: add rk3288-firefly-reload The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-07-18 23:32:32 +08:00
};
hym8563 {
rtc_int: rtc-int {
rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
keys {
pwr_key: pwr-key {
rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
leds {
power_led: power-led {
rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>;
};
work_led: work-led {
rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdmmc {
/*
* Default drive strength isn't enough to achieve even
* high-speed mode on firefly board so bump up to 12ma.
*/
sdmmc_bus4: sdmmc-bus4 {
rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
<6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
<6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
<6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
};
sdmmc_clk: sdmmc-clk {
rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
};
sdmmc_cmd: sdmmc-cmd {
rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
};
sdmmc_pwr: sdmmc-pwr {
rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdio {
wifi_enable: wifi-enable {
rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb_host {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
};
usbhub_rst: usbhub-rst {
rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>;
};
};
usb_otg {
otg_vbus_drv: otg-vbus-drv {
rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};