linux/arch/arm/mach-ux500/board-mop500-regulators.c

/*
 * Copyright (C) ST-Ericsson SA 2010
 *
 * License Terms: GNU General Public License v2
 *
 * Authors: Sundar Iyer <sundar.iyer@stericsson.com>
 *          Bengt Jonsson <bengt.g.jonsson@stericsson.com>
 *
 * MOP500 board specific initialization for regulators
 */
#include <linux/kernel.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/ab8500.h>
#include "board-mop500-regulators.h"

static struct regulator_consumer_supply gpio_en_3v3_consumers[] = {
       REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
};

struct regulator_init_data gpio_en_3v3_regulator = {
       .constraints = {
               .name = "EN-3V3",
               .min_uV = 3300000,
               .max_uV = 3300000,
               .valid_ops_mask = REGULATOR_CHANGE_STATUS,
       },
       .num_consumer_supplies = ARRAY_SIZE(gpio_en_3v3_consumers),
       .consumer_supplies = gpio_en_3v3_consumers,
};

/*
 * TPS61052 regulator
 */
static struct regulator_consumer_supply tps61052_vaudio_consumers[] = {
	/*
	 * Boost converter supply to raise voltage on audio speaker, this
	 * is actually connected to three pins, VInVhfL (left amplifier)
	 * VInVhfR (right amplifier) and VIntDClassInt - all three must
	 * be connected to the same voltage.
	 */
	REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"),
};

struct regulator_init_data tps61052_regulator = {
	.constraints = {
		.name = "vaudio-hf",
		.min_uV = 4500000,
		.max_uV = 4500000,
		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers),
	.consumer_supplies = tps61052_vaudio_consumers,
};

static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
	/* External displays, connector on board 2v5 power supply */
	REGULATOR_SUPPLY("vaux12v5", "mcde.0"),
	/* SFH7741 proximity sensor */
	REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
	/* BH1780GLS ambient light sensor */
	REGULATOR_SUPPLY("vcc", "2-0029"),
	/* lsm303dlh accelerometer */
	REGULATOR_SUPPLY("vdd", "3-0018"),
	/* lsm303dlh magnetometer */
	REGULATOR_SUPPLY("vdd", "3-001e"),
	/* Rohm BU21013 Touchscreen devices */
	REGULATOR_SUPPLY("avdd", "3-005c"),
	REGULATOR_SUPPLY("avdd", "3-005d"),
	/* Synaptics RMI4 Touchscreen device */
	REGULATOR_SUPPLY("vdd", "3-004b"),
};

static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
	/* On-board eMMC power */
	REGULATOR_SUPPLY("vmmc", "sdi4"),
	/* AB8500 audio codec */
	REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"),
};

static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
	/* External MMC slot power */
	REGULATOR_SUPPLY("vmmc", "sdi0"),
};

static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
	/* TV-out DENC supply */
	REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
	/* Internal general-purpose ADC */
	REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
};

static struct regulator_consumer_supply ab8500_vaud_consumers[] = {
	/* AB8500 audio-codec main supply */
	REGULATOR_SUPPLY("vaud", "ab8500-codec.0"),
};

static struct regulator_consumer_supply ab8500_vamic1_consumers[] = {
	/* AB8500 audio-codec Mic1 supply */
	REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"),
};

static struct regulator_consumer_supply ab8500_vamic2_consumers[] = {
	/* AB8500 audio-codec Mic2 supply */
	REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"),
};

static struct regulator_consumer_supply ab8500_vdmic_consumers[] = {
	/* AB8500 audio-codec DMic supply */
	REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"),
};

static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
	/* SoC core supply, no device */
	REGULATOR_SUPPLY("v-intcore", NULL),
	/* USB Transceiver */
	REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
};

static struct regulator_consumer_supply ab8500_vana_consumers[] = {
	/* External displays, connector on board, 1v8 power supply */
	REGULATOR_SUPPLY("vsmps2", "mcde.0"),
};

/* ab8500 regulator register initialization */
struct ab8500_regulator_reg_init
ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
	/*
	 * VanaRequestCtrl          = HP/LP depending on VxRequest
	 * VextSupply1RequestCtrl   = HP/LP depending on VxRequest
	 */
	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00),
	/*
	 * VextSupply2RequestCtrl   = HP/LP depending on VxRequest
	 * VextSupply3RequestCtrl   = HP/LP depending on VxRequest
	 * Vaux1RequestCtrl         = HP/LP depending on VxRequest
	 * Vaux2RequestCtrl         = HP/LP depending on VxRequest
	 */
	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0x00),
	/*
	 * Vaux3RequestCtrl         = HP/LP depending on VxRequest
	 * SwHPReq                  = Control through SWValid disabled
	 */
	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00),
	/*
	 * VanaSysClkReq1HPValid    = disabled
	 * Vaux1SysClkReq1HPValid   = disabled
	 * Vaux2SysClkReq1HPValid   = disabled
	 * Vaux3SysClkReq1HPValid   = disabled
	 */
	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x00),
	/*
	 * VextSupply1SysClkReq1HPValid = disabled
	 * VextSupply2SysClkReq1HPValid = disabled
	 * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
	 */
	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x40),
	/*
	 * VanaHwHPReq1Valid        = disabled
	 * Vaux1HwHPreq1Valid       = disabled
	 * Vaux2HwHPReq1Valid       = disabled
	 * Vaux3HwHPReqValid        = disabled
	 */
	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0x00),
	/*
	 * VextSupply1HwHPReq1Valid = disabled
	 * VextSupply2HwHPReq1Valid = disabled
	 * VextSupply3HwHPReq1Valid = disabled
	 */
	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x00),
	/*
	 * VanaHwHPReq2Valid        = disabled
	 * Vaux1HwHPReq2Valid       = disabled
	 * Vaux2HwHPReq2Valid       = disabled
	 * Vaux3HwHPReq2Valid       = disabled
	 */
	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0x00),
	/*
	 * VextSupply1HwHPReq2Valid = disabled
	 * VextSupply2HwHPReq2Valid = disabled
	 * VextSupply3HwHPReq2Valid = HWReq2 controlled
	 */
	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x04),
	/*
	 * VanaSwHPReqValid         = disabled
	 * Vaux1SwHPReqValid        = disabled
	 */
	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0x00),
	/*
	 * Vaux2SwHPReqValid        = disabled
	 * Vaux3SwHPReqValid        = disabled
	 * VextSupply1SwHPReqValid  = disabled
	 * VextSupply2SwHPReqValid  = disabled
	 * VextSupply3SwHPReqValid  = disabled
	 */
	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x00),
	/*
	 * SysClkReq2Valid1         = SysClkReq2 controlled
	 * SysClkReq3Valid1         = disabled
	 * SysClkReq4Valid1         = SysClkReq4 controlled
	 * SysClkReq5Valid1         = disabled
	 * SysClkReq6Valid1         = SysClkReq6 controlled
	 * SysClkReq7Valid1         = disabled
	 * SysClkReq8Valid1         = disabled
	 */
	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0x2a),
	/*
	 * SysClkReq2Valid2         = disabled
	 * SysClkReq3Valid2         = disabled
	 * SysClkReq4Valid2         = disabled
	 * SysClkReq5Valid2         = disabled
	 * SysClkReq6Valid2         = SysClkReq6 controlled
	 * SysClkReq7Valid2         = disabled
	 * SysClkReq8Valid2         = disabled
	 */
	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0x20),
	/*
	 * VTVoutEna                = disabled
	 * Vintcore12Ena            = disabled
	 * Vintcore12Sel            = 1.25 V
	 * Vintcore12LP             = inactive (HP)
	 * VTVoutLP                 = inactive (HP)
	 */
	INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0x10),
	/*
	 * VaudioEna                = disabled
	 * VdmicEna                 = disabled
	 * Vamic1Ena                = disabled
	 * Vamic2Ena                = disabled
	 */
	INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x00),
	/*
	 * Vamic1_dzout             = high-Z when Vamic1 is disabled
	 * Vamic2_dzout             = high-Z when Vamic2 is disabled
	 */
	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00),
	/*
	 * VPll                     = Hw controlled
	 * VanaRegu                 = force off
	 */
	INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x02),
	/*
	 * VrefDDREna               = disabled
	 * VrefDDRSleepMode         = inactive (no pulldown)
	 */
	INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x00),
	/*
	 * VextSupply1Regu          = HW control
	 * VextSupply2Regu          = HW control
	 * VextSupply3Regu          = HW control
	 * ExtSupply2Bypass         = ExtSupply12LPn ball is 0 when Ena is 0
	 * ExtSupply3Bypass         = ExtSupply3LPn ball is 0 when Ena is 0
	 */
	INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0x2a),
	/*
	 * Vaux1Regu                = force HP
	 * Vaux2Regu                = force off
	 */
	INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01),
	/*
	 * Vaux3regu                = force off
	 */
	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x00),
	/*
	 * Vsmps1                   = 1.15V
	 */
	INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x24),
	/*
	 * Vaux1Sel                 = 2.5 V
	 */
	INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x08),
	/*
	 * Vaux2Sel                 = 2.9 V
	 */
	INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0d),
	/*
	 * Vaux3Sel                 = 2.91 V
	 */
	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07),
	/*
	 * VextSupply12LP           = disabled (no LP)
	 */
	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x00),
	/*
	 * Vaux1Disch               = short discharge time
	 * Vaux2Disch               = short discharge time
	 * Vaux3Disch               = short discharge time
	 * Vintcore12Disch          = short discharge time
	 * VTVoutDisch              = short discharge time
	 * VaudioDisch              = short discharge time
	 */
	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0x00),
	/*
	 * VanaDisch                = short discharge time
	 * VdmicPullDownEna         = pulldown disabled when Vdmic is disabled
	 * VdmicDisch               = short discharge time
	 */
	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x00),
};

/* AB8500 regulators */
struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
	/* supplies to the display/camera */
	[AB8500_LDO_AUX1] = {
		.constraints = {
			.name = "V-DISPLAY",
			.min_uV = 2500000,
			.max_uV = 2900000,
			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
					  REGULATOR_CHANGE_STATUS,
			.boot_on = 1, /* display is on at boot */
			/*
			 * This voltage cannot be disabled right now because
			 * it is somehow affecting the external MMC
			 * functionality, though that typically will use
			 * AUX3.
			 */
			.always_on = 1,
		},
		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
		.consumer_supplies = ab8500_vaux1_consumers,
	},
	/* supplies to the on-board eMMC */
	[AB8500_LDO_AUX2] = {
		.constraints = {
			.name = "V-eMMC1",
			.min_uV = 1100000,
			.max_uV = 3300000,
			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
					  REGULATOR_CHANGE_STATUS,
		},
		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
		.consumer_supplies = ab8500_vaux2_consumers,
	},
	/* supply for VAUX3, supplies to SDcard slots */
	[AB8500_LDO_AUX3] = {
		.constraints = {
			.name = "V-MMC-SD",
			.min_uV = 1100000,
			.max_uV = 3300000,
			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
					  REGULATOR_CHANGE_STATUS,
		},
		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
		.consumer_supplies = ab8500_vaux3_consumers,
	},
	/* supply for tvout, gpadc, TVOUT LDO */
	[AB8500_LDO_TVOUT] = {
		.constraints = {
			.name = "V-TVOUT",
			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
		},
		.num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers),
		.consumer_supplies = ab8500_vtvout_consumers,
	},
	/* supply for ab8500-vaudio, VAUDIO LDO */
	[AB8500_LDO_AUDIO] = {
		.constraints = {
			.name = "V-AUD",
			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
		},
		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
		.consumer_supplies = ab8500_vaud_consumers,
	},
	/* supply for v-anamic1 VAMic1-LDO */
	[AB8500_LDO_ANAMIC1] = {
		.constraints = {
			.name = "V-AMIC1",
			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
		},
		.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
		.consumer_supplies = ab8500_vamic1_consumers,
	},
	/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
	[AB8500_LDO_ANAMIC2] = {
		.constraints = {
			.name = "V-AMIC2",
			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
		},
		.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
		.consumer_supplies = ab8500_vamic2_consumers,
	},
	/* supply for v-dmic, VDMIC LDO */
	[AB8500_LDO_DMIC] = {
		.constraints = {
			.name = "V-DMIC",
			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
		},
		.num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers),
		.consumer_supplies = ab8500_vdmic_consumers,
	},
	/* supply for v-intcore12, VINTCORE12 LDO */
	[AB8500_LDO_INTCORE] = {
		.constraints = {
			.name = "V-INTCORE",
			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
		},
		.num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
		.consumer_supplies = ab8500_vintcore_consumers,
	},
	/* supply for U8500 CSI/DSI, VANA LDO */
	[AB8500_LDO_ANA] = {
		.constraints = {
			.name = "V-CSI/DSI",
			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
		},
		.num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
		.consumer_supplies = ab8500_vana_consumers,
	},
};