openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/media/dvb-frontends/stv0367.c

3456 lines
92 KiB
C
Raw Normal View History

[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
/*
* stv0367.c
*
* Driver for ST STV0367 DVB-T & DVB-C demodulator IC.
*
* Copyright (C) ST Microelectronics.
* Copyright (C) 2010,2011 NetUP Inc.
* Copyright (C) 2010,2011 Igor M. Liplianin <liplianin@netup.ru>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
*
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include "stv0367.h"
#include "stv0367_regs.h"
#include "stv0367_priv.h"
[media] stv0367: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/stv0367.c:791:1: warning: 'stv0367_writeregs.constprop.4' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 16:17:01 +08:00
/* Max transfer size done by I2C transfer functions */
#define MAX_XFER_SIZE 64
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
static int stvdebug;
module_param_named(debug, stvdebug, int, 0644);
static int i2cdebug;
module_param_named(i2c_debug, i2cdebug, int, 0644);
#define dprintk(args...) \
do { \
if (stvdebug) \
printk(KERN_DEBUG args); \
} while (0)
/* DVB-C */
struct stv0367cab_state {
enum stv0367_cab_signal_type state;
u32 mclk;
u32 adc_clk;
s32 search_range;
s32 derot_offset;
/* results */
int locked; /* channel found */
u32 freq_khz; /* found frequency (in kHz) */
u32 symbol_rate; /* found symbol rate (in Bds) */
[media] dvb: Get rid of typedev usage for enums The DVB API was originally defined using typedefs. This is against Kernel CodingStyle, and there's no good usage here. While we can't remove its usage on userspace, we can avoid its usage in Kernelspace. So, let's do it. This patch was generated by this shell script: for j in $(grep typedef include/uapi/linux/dvb/frontend.h |cut -d' ' -f 3); do for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f); do sed "s,${j}_t,enum $j," <$i >a && mv a $i; done; done While here, make CodingStyle fixes on the affected lines. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> # for drivers/media/firewire/*
2015-06-08 01:53:52 +08:00
enum fe_spectral_inversion spect_inv; /* Spectrum Inversion */
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
};
struct stv0367ter_state {
/* DVB-T */
enum stv0367_ter_signal_type state;
enum stv0367_ter_if_iq_mode if_iq_mode;
enum stv0367_ter_mode mode;/* mode 2K or 8K */
[media] dvb: Get rid of typedev usage for enums The DVB API was originally defined using typedefs. This is against Kernel CodingStyle, and there's no good usage here. While we can't remove its usage on userspace, we can avoid its usage in Kernelspace. So, let's do it. This patch was generated by this shell script: for j in $(grep typedef include/uapi/linux/dvb/frontend.h |cut -d' ' -f 3); do for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f); do sed "s,${j}_t,enum $j," <$i >a && mv a $i; done; done While here, make CodingStyle fixes on the affected lines. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> # for drivers/media/firewire/*
2015-06-08 01:53:52 +08:00
enum fe_guard_interval guard;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
enum stv0367_ter_hierarchy hierarchy;
u32 frequency;
[media] dvb: Get rid of typedev usage for enums The DVB API was originally defined using typedefs. This is against Kernel CodingStyle, and there's no good usage here. While we can't remove its usage on userspace, we can avoid its usage in Kernelspace. So, let's do it. This patch was generated by this shell script: for j in $(grep typedef include/uapi/linux/dvb/frontend.h |cut -d' ' -f 3); do for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f); do sed "s,${j}_t,enum $j," <$i >a && mv a $i; done; done While here, make CodingStyle fixes on the affected lines. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> # for drivers/media/firewire/*
2015-06-08 01:53:52 +08:00
enum fe_spectral_inversion sense; /* current search spectrum */
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
u8 force; /* force mode/guard */
u8 bw; /* channel width 6, 7 or 8 in MHz */
u8 pBW; /* channel width used during previous lock */
u32 pBER;
u32 pPER;
u32 ucblocks;
s8 echo_pos; /* echo position */
u8 first_lock;
u8 unlock_counter;
u32 agc_val;
};
struct stv0367_state {
struct dvb_frontend fe;
struct i2c_adapter *i2c;
/* config settings */
const struct stv0367_config *config;
u8 chip_id;
/* DVB-C */
struct stv0367cab_state *cab_state;
/* DVB-T */
struct stv0367ter_state *ter_state;
};
struct st_register {
u16 addr;
u8 value;
};
/* values for STV4100 XTAL=30M int clk=53.125M*/
static struct st_register def0367ter[STV0367TER_NBREGS] = {
{R367TER_ID, 0x60},
{R367TER_I2CRPT, 0xa0},
/* {R367TER_I2CRPT, 0x22},*/
{R367TER_TOPCTRL, 0x00},/* for xc5000; was 0x02 */
{R367TER_IOCFG0, 0x40},
{R367TER_DAC0R, 0x00},
{R367TER_IOCFG1, 0x00},
{R367TER_DAC1R, 0x00},
{R367TER_IOCFG2, 0x62},
{R367TER_SDFR, 0x00},
{R367TER_STATUS, 0xf8},
{R367TER_AUX_CLK, 0x0a},
{R367TER_FREESYS1, 0x00},
{R367TER_FREESYS2, 0x00},
{R367TER_FREESYS3, 0x00},
{R367TER_GPIO_CFG, 0x55},
{R367TER_GPIO_CMD, 0x00},
{R367TER_AGC2MAX, 0xff},
{R367TER_AGC2MIN, 0x00},
{R367TER_AGC1MAX, 0xff},
{R367TER_AGC1MIN, 0x00},
{R367TER_AGCR, 0xbc},
{R367TER_AGC2TH, 0x00},
{R367TER_AGC12C, 0x00},
{R367TER_AGCCTRL1, 0x85},
{R367TER_AGCCTRL2, 0x1f},
{R367TER_AGC1VAL1, 0x00},
{R367TER_AGC1VAL2, 0x00},
{R367TER_AGC2VAL1, 0x6f},
{R367TER_AGC2VAL2, 0x05},
{R367TER_AGC2PGA, 0x00},
{R367TER_OVF_RATE1, 0x00},
{R367TER_OVF_RATE2, 0x00},
{R367TER_GAIN_SRC1, 0xaa},/* for xc5000; was 0x2b */
{R367TER_GAIN_SRC2, 0xd6},/* for xc5000; was 0x04 */
{R367TER_INC_DEROT1, 0x55},
{R367TER_INC_DEROT2, 0x55},
{R367TER_PPM_CPAMP_DIR, 0x2c},
{R367TER_PPM_CPAMP_INV, 0x00},
{R367TER_FREESTFE_1, 0x00},
{R367TER_FREESTFE_2, 0x1c},
{R367TER_DCOFFSET, 0x00},
{R367TER_EN_PROCESS, 0x05},
{R367TER_SDI_SMOOTHER, 0x80},
{R367TER_FE_LOOP_OPEN, 0x1c},
{R367TER_FREQOFF1, 0x00},
{R367TER_FREQOFF2, 0x00},
{R367TER_FREQOFF3, 0x00},
{R367TER_TIMOFF1, 0x00},
{R367TER_TIMOFF2, 0x00},
{R367TER_EPQ, 0x02},
{R367TER_EPQAUTO, 0x01},
{R367TER_SYR_UPDATE, 0xf5},
{R367TER_CHPFREE, 0x00},
{R367TER_PPM_STATE_MAC, 0x23},
{R367TER_INR_THRESHOLD, 0xff},
{R367TER_EPQ_TPS_ID_CELL, 0xf9},
{R367TER_EPQ_CFG, 0x00},
{R367TER_EPQ_STATUS, 0x01},
{R367TER_AUTORELOCK, 0x81},
{R367TER_BER_THR_VMSB, 0x00},
{R367TER_BER_THR_MSB, 0x00},
{R367TER_BER_THR_LSB, 0x00},
{R367TER_CCD, 0x83},
{R367TER_SPECTR_CFG, 0x00},
{R367TER_CHC_DUMMY, 0x18},
{R367TER_INC_CTL, 0x88},
{R367TER_INCTHRES_COR1, 0xb4},
{R367TER_INCTHRES_COR2, 0x96},
{R367TER_INCTHRES_DET1, 0x0e},
{R367TER_INCTHRES_DET2, 0x11},
{R367TER_IIR_CELLNB, 0x8d},
{R367TER_IIRCX_COEFF1_MSB, 0x00},
{R367TER_IIRCX_COEFF1_LSB, 0x00},
{R367TER_IIRCX_COEFF2_MSB, 0x09},
{R367TER_IIRCX_COEFF2_LSB, 0x18},
{R367TER_IIRCX_COEFF3_MSB, 0x14},
{R367TER_IIRCX_COEFF3_LSB, 0x9c},
{R367TER_IIRCX_COEFF4_MSB, 0x00},
{R367TER_IIRCX_COEFF4_LSB, 0x00},
{R367TER_IIRCX_COEFF5_MSB, 0x36},
{R367TER_IIRCX_COEFF5_LSB, 0x42},
{R367TER_FEPATH_CFG, 0x00},
{R367TER_PMC1_FUNC, 0x65},
{R367TER_PMC1_FOR, 0x00},
{R367TER_PMC2_FUNC, 0x00},
{R367TER_STATUS_ERR_DA, 0xe0},
{R367TER_DIG_AGC_R, 0xfe},
{R367TER_COMAGC_TARMSB, 0x0b},
{R367TER_COM_AGC_TAR_ENMODE, 0x41},
{R367TER_COM_AGC_CFG, 0x3e},
{R367TER_COM_AGC_GAIN1, 0x39},
{R367TER_AUT_AGC_TARGETMSB, 0x0b},
{R367TER_LOCK_DET_MSB, 0x01},
{R367TER_AGCTAR_LOCK_LSBS, 0x40},
{R367TER_AUT_GAIN_EN, 0xf4},
{R367TER_AUT_CFG, 0xf0},
{R367TER_LOCKN, 0x23},
{R367TER_INT_X_3, 0x00},
{R367TER_INT_X_2, 0x03},
{R367TER_INT_X_1, 0x8d},
{R367TER_INT_X_0, 0xa0},
{R367TER_MIN_ERRX_MSB, 0x00},
{R367TER_COR_CTL, 0x23},
{R367TER_COR_STAT, 0xf6},
{R367TER_COR_INTEN, 0x00},
{R367TER_COR_INTSTAT, 0x3f},
{R367TER_COR_MODEGUARD, 0x03},
{R367TER_AGC_CTL, 0x08},
{R367TER_AGC_MANUAL1, 0x00},
{R367TER_AGC_MANUAL2, 0x00},
{R367TER_AGC_TARG, 0x16},
{R367TER_AGC_GAIN1, 0x53},
{R367TER_AGC_GAIN2, 0x1d},
{R367TER_RESERVED_1, 0x00},
{R367TER_RESERVED_2, 0x00},
{R367TER_RESERVED_3, 0x00},
{R367TER_CAS_CTL, 0x44},
{R367TER_CAS_FREQ, 0xb3},
{R367TER_CAS_DAGCGAIN, 0x12},
{R367TER_SYR_CTL, 0x04},
{R367TER_SYR_STAT, 0x10},
{R367TER_SYR_NCO1, 0x00},
{R367TER_SYR_NCO2, 0x00},
{R367TER_SYR_OFFSET1, 0x00},
{R367TER_SYR_OFFSET2, 0x00},
{R367TER_FFT_CTL, 0x00},
{R367TER_SCR_CTL, 0x70},
{R367TER_PPM_CTL1, 0xf8},
{R367TER_TRL_CTL, 0x14},/* for xc5000; was 0xac */
{R367TER_TRL_NOMRATE1, 0xae},/* for xc5000; was 0x1e */
{R367TER_TRL_NOMRATE2, 0x56},/* for xc5000; was 0x58 */
{R367TER_TRL_TIME1, 0x1d},
{R367TER_TRL_TIME2, 0xfc},
{R367TER_CRL_CTL, 0x24},
{R367TER_CRL_FREQ1, 0xad},
{R367TER_CRL_FREQ2, 0x9d},
{R367TER_CRL_FREQ3, 0xff},
{R367TER_CHC_CTL, 0x01},
{R367TER_CHC_SNR, 0xf0},
{R367TER_BDI_CTL, 0x00},
{R367TER_DMP_CTL, 0x00},
{R367TER_TPS_RCVD1, 0x30},
{R367TER_TPS_RCVD2, 0x02},
{R367TER_TPS_RCVD3, 0x01},
{R367TER_TPS_RCVD4, 0x00},
{R367TER_TPS_ID_CELL1, 0x00},
{R367TER_TPS_ID_CELL2, 0x00},
{R367TER_TPS_RCVD5_SET1, 0x02},
{R367TER_TPS_SET2, 0x02},
{R367TER_TPS_SET3, 0x01},
{R367TER_TPS_CTL, 0x00},
{R367TER_CTL_FFTOSNUM, 0x34},
{R367TER_TESTSELECT, 0x09},
{R367TER_MSC_REV, 0x0a},
{R367TER_PIR_CTL, 0x00},
{R367TER_SNR_CARRIER1, 0xa1},
{R367TER_SNR_CARRIER2, 0x9a},
{R367TER_PPM_CPAMP, 0x2c},
{R367TER_TSM_AP0, 0x00},
{R367TER_TSM_AP1, 0x00},
{R367TER_TSM_AP2 , 0x00},
{R367TER_TSM_AP3, 0x00},
{R367TER_TSM_AP4, 0x00},
{R367TER_TSM_AP5, 0x00},
{R367TER_TSM_AP6, 0x00},
{R367TER_TSM_AP7, 0x00},
{R367TER_TSTRES, 0x00},
{R367TER_ANACTRL, 0x0D},/* PLL stoped, restart at init!!! */
{R367TER_TSTBUS, 0x00},
{R367TER_TSTRATE, 0x00},
{R367TER_CONSTMODE, 0x01},
{R367TER_CONSTCARR1, 0x00},
{R367TER_CONSTCARR2, 0x00},
{R367TER_ICONSTEL, 0x0a},
{R367TER_QCONSTEL, 0x15},
{R367TER_TSTBISTRES0, 0x00},
{R367TER_TSTBISTRES1, 0x00},
{R367TER_TSTBISTRES2, 0x28},
{R367TER_TSTBISTRES3, 0x00},
{R367TER_RF_AGC1, 0xff},
{R367TER_RF_AGC2, 0x83},
{R367TER_ANADIGCTRL, 0x19},
{R367TER_PLLMDIV, 0x01},/* for xc5000; was 0x0c */
{R367TER_PLLNDIV, 0x06},/* for xc5000; was 0x55 */
{R367TER_PLLSETUP, 0x18},
[media] stv0367: change default value for AGC register Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-02 20:11:00 +08:00
{R367TER_DUAL_AD12, 0x0C},/* for xc5000 AGC voltage 1.6V */
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
{R367TER_TSTBIST, 0x00},
{R367TER_PAD_COMP_CTRL, 0x00},
{R367TER_PAD_COMP_WR, 0x00},
{R367TER_PAD_COMP_RD, 0xe0},
{R367TER_SYR_TARGET_FFTADJT_MSB, 0x00},
{R367TER_SYR_TARGET_FFTADJT_LSB, 0x00},
{R367TER_SYR_TARGET_CHCADJT_MSB, 0x00},
{R367TER_SYR_TARGET_CHCADJT_LSB, 0x00},
{R367TER_SYR_FLAG, 0x00},
{R367TER_CRL_TARGET1, 0x00},
{R367TER_CRL_TARGET2, 0x00},
{R367TER_CRL_TARGET3, 0x00},
{R367TER_CRL_TARGET4, 0x00},
{R367TER_CRL_FLAG, 0x00},
{R367TER_TRL_TARGET1, 0x00},
{R367TER_TRL_TARGET2, 0x00},
{R367TER_TRL_CHC, 0x00},
{R367TER_CHC_SNR_TARG, 0x00},
{R367TER_TOP_TRACK, 0x00},
{R367TER_TRACKER_FREE1, 0x00},
{R367TER_ERROR_CRL1, 0x00},
{R367TER_ERROR_CRL2, 0x00},
{R367TER_ERROR_CRL3, 0x00},
{R367TER_ERROR_CRL4, 0x00},
{R367TER_DEC_NCO1, 0x2c},
{R367TER_DEC_NCO2, 0x0f},
{R367TER_DEC_NCO3, 0x20},
{R367TER_SNR, 0xf1},
{R367TER_SYR_FFTADJ1, 0x00},
{R367TER_SYR_FFTADJ2, 0x00},
{R367TER_SYR_CHCADJ1, 0x00},
{R367TER_SYR_CHCADJ2, 0x00},
{R367TER_SYR_OFF, 0x00},
{R367TER_PPM_OFFSET1, 0x00},
{R367TER_PPM_OFFSET2, 0x03},
{R367TER_TRACKER_FREE2, 0x00},
{R367TER_DEBG_LT10, 0x00},
{R367TER_DEBG_LT11, 0x00},
{R367TER_DEBG_LT12, 0x00},
{R367TER_DEBG_LT13, 0x00},
{R367TER_DEBG_LT14, 0x00},
{R367TER_DEBG_LT15, 0x00},
{R367TER_DEBG_LT16, 0x00},
{R367TER_DEBG_LT17, 0x00},
{R367TER_DEBG_LT18, 0x00},
{R367TER_DEBG_LT19, 0x00},
{R367TER_DEBG_LT1A, 0x00},
{R367TER_DEBG_LT1B, 0x00},
{R367TER_DEBG_LT1C, 0x00},
{R367TER_DEBG_LT1D, 0x00},
{R367TER_DEBG_LT1E, 0x00},
{R367TER_DEBG_LT1F, 0x00},
{R367TER_RCCFGH, 0x00},
{R367TER_RCCFGM, 0x00},
{R367TER_RCCFGL, 0x00},
{R367TER_RCINSDELH, 0x00},
{R367TER_RCINSDELM, 0x00},
{R367TER_RCINSDELL, 0x00},
{R367TER_RCSTATUS, 0x00},
{R367TER_RCSPEED, 0x6f},
{R367TER_RCDEBUGM, 0xe7},
{R367TER_RCDEBUGL, 0x9b},
{R367TER_RCOBSCFG, 0x00},
{R367TER_RCOBSM, 0x00},
{R367TER_RCOBSL, 0x00},
{R367TER_RCFECSPY, 0x00},
{R367TER_RCFSPYCFG, 0x00},
{R367TER_RCFSPYDATA, 0x00},
{R367TER_RCFSPYOUT, 0x00},
{R367TER_RCFSTATUS, 0x00},
{R367TER_RCFGOODPACK, 0x00},
{R367TER_RCFPACKCNT, 0x00},
{R367TER_RCFSPYMISC, 0x00},
{R367TER_RCFBERCPT4, 0x00},
{R367TER_RCFBERCPT3, 0x00},
{R367TER_RCFBERCPT2, 0x00},
{R367TER_RCFBERCPT1, 0x00},
{R367TER_RCFBERCPT0, 0x00},
{R367TER_RCFBERERR2, 0x00},
{R367TER_RCFBERERR1, 0x00},
{R367TER_RCFBERERR0, 0x00},
{R367TER_RCFSTATESM, 0x00},
{R367TER_RCFSTATESL, 0x00},
{R367TER_RCFSPYBER, 0x00},
{R367TER_RCFSPYDISTM, 0x00},
{R367TER_RCFSPYDISTL, 0x00},
{R367TER_RCFSPYOBS7, 0x00},
{R367TER_RCFSPYOBS6, 0x00},
{R367TER_RCFSPYOBS5, 0x00},
{R367TER_RCFSPYOBS4, 0x00},
{R367TER_RCFSPYOBS3, 0x00},
{R367TER_RCFSPYOBS2, 0x00},
{R367TER_RCFSPYOBS1, 0x00},
{R367TER_RCFSPYOBS0, 0x00},
{R367TER_TSGENERAL, 0x00},
{R367TER_RC1SPEED, 0x6f},
{R367TER_TSGSTATUS, 0x18},
{R367TER_FECM, 0x01},
{R367TER_VTH12, 0xff},
{R367TER_VTH23, 0xa1},
{R367TER_VTH34, 0x64},
{R367TER_VTH56, 0x40},
{R367TER_VTH67, 0x00},
{R367TER_VTH78, 0x2c},
{R367TER_VITCURPUN, 0x12},
{R367TER_VERROR, 0x01},
{R367TER_PRVIT, 0x3f},
{R367TER_VAVSRVIT, 0x00},
{R367TER_VSTATUSVIT, 0xbd},
{R367TER_VTHINUSE, 0xa1},
{R367TER_KDIV12, 0x20},
{R367TER_KDIV23, 0x40},
{R367TER_KDIV34, 0x20},
{R367TER_KDIV56, 0x30},
{R367TER_KDIV67, 0x00},
{R367TER_KDIV78, 0x30},
{R367TER_SIGPOWER, 0x54},
{R367TER_DEMAPVIT, 0x40},
{R367TER_VITSCALE, 0x00},
{R367TER_FFEC1PRG, 0x00},
{R367TER_FVITCURPUN, 0x12},
{R367TER_FVERROR, 0x01},
{R367TER_FVSTATUSVIT, 0xbd},
{R367TER_DEBUG_LT1, 0x00},
{R367TER_DEBUG_LT2, 0x00},
{R367TER_DEBUG_LT3, 0x00},
{R367TER_TSTSFMET, 0x00},
{R367TER_SELOUT, 0x00},
{R367TER_TSYNC, 0x00},
{R367TER_TSTERR, 0x00},
{R367TER_TSFSYNC, 0x00},
{R367TER_TSTSFERR, 0x00},
{R367TER_TSTTSSF1, 0x01},
{R367TER_TSTTSSF2, 0x1f},
{R367TER_TSTTSSF3, 0x00},
{R367TER_TSTTS1, 0x00},
{R367TER_TSTTS2, 0x1f},
{R367TER_TSTTS3, 0x01},
{R367TER_TSTTS4, 0x00},
{R367TER_TSTTSRC, 0x00},
{R367TER_TSTTSRS, 0x00},
{R367TER_TSSTATEM, 0xb0},
{R367TER_TSSTATEL, 0x40},
{R367TER_TSCFGH, 0xC0},
{R367TER_TSCFGM, 0xc0},/* for xc5000; was 0x00 */
{R367TER_TSCFGL, 0x20},
{R367TER_TSSYNC, 0x00},
{R367TER_TSINSDELH, 0x00},
{R367TER_TSINSDELM, 0x00},
{R367TER_TSINSDELL, 0x00},
{R367TER_TSDIVN, 0x03},
{R367TER_TSDIVPM, 0x00},
{R367TER_TSDIVPL, 0x00},
{R367TER_TSDIVQM, 0x00},
{R367TER_TSDIVQL, 0x00},
{R367TER_TSDILSTKM, 0x00},
{R367TER_TSDILSTKL, 0x00},
{R367TER_TSSPEED, 0x40},/* for xc5000; was 0x6f */
{R367TER_TSSTATUS, 0x81},
{R367TER_TSSTATUS2, 0x6a},
{R367TER_TSBITRATEM, 0x0f},
{R367TER_TSBITRATEL, 0xc6},
{R367TER_TSPACKLENM, 0x00},
{R367TER_TSPACKLENL, 0xfc},
{R367TER_TSBLOCLENM, 0x0a},
{R367TER_TSBLOCLENL, 0x80},
{R367TER_TSDLYH, 0x90},
{R367TER_TSDLYM, 0x68},
{R367TER_TSDLYL, 0x01},
{R367TER_TSNPDAV, 0x00},
{R367TER_TSBUFSTATH, 0x00},
{R367TER_TSBUFSTATM, 0x00},
{R367TER_TSBUFSTATL, 0x00},
{R367TER_TSDEBUGM, 0xcf},
{R367TER_TSDEBUGL, 0x1e},
{R367TER_TSDLYSETH, 0x00},
{R367TER_TSDLYSETM, 0x68},
{R367TER_TSDLYSETL, 0x00},
{R367TER_TSOBSCFG, 0x00},
{R367TER_TSOBSM, 0x47},
{R367TER_TSOBSL, 0x1f},
{R367TER_ERRCTRL1, 0x95},
{R367TER_ERRCNT1H, 0x80},
{R367TER_ERRCNT1M, 0x00},
{R367TER_ERRCNT1L, 0x00},
{R367TER_ERRCTRL2, 0x95},
{R367TER_ERRCNT2H, 0x00},
{R367TER_ERRCNT2M, 0x00},
{R367TER_ERRCNT2L, 0x00},
{R367TER_FECSPY, 0x88},
{R367TER_FSPYCFG, 0x2c},
{R367TER_FSPYDATA, 0x3a},
{R367TER_FSPYOUT, 0x06},
{R367TER_FSTATUS, 0x61},
{R367TER_FGOODPACK, 0xff},
{R367TER_FPACKCNT, 0xff},
{R367TER_FSPYMISC, 0x66},
{R367TER_FBERCPT4, 0x00},
{R367TER_FBERCPT3, 0x00},
{R367TER_FBERCPT2, 0x36},
{R367TER_FBERCPT1, 0x36},
{R367TER_FBERCPT0, 0x14},
{R367TER_FBERERR2, 0x00},
{R367TER_FBERERR1, 0x03},
{R367TER_FBERERR0, 0x28},
{R367TER_FSTATESM, 0x00},
{R367TER_FSTATESL, 0x02},
{R367TER_FSPYBER, 0x00},
{R367TER_FSPYDISTM, 0x01},
{R367TER_FSPYDISTL, 0x9f},
{R367TER_FSPYOBS7, 0xc9},
{R367TER_FSPYOBS6, 0x99},
{R367TER_FSPYOBS5, 0x08},
{R367TER_FSPYOBS4, 0xec},
{R367TER_FSPYOBS3, 0x01},
{R367TER_FSPYOBS2, 0x0f},
{R367TER_FSPYOBS1, 0xf5},
{R367TER_FSPYOBS0, 0x08},
{R367TER_SFDEMAP, 0x40},
{R367TER_SFERROR, 0x00},
{R367TER_SFAVSR, 0x30},
{R367TER_SFECSTATUS, 0xcc},
{R367TER_SFKDIV12, 0x20},
{R367TER_SFKDIV23, 0x40},
{R367TER_SFKDIV34, 0x20},
{R367TER_SFKDIV56, 0x20},
{R367TER_SFKDIV67, 0x00},
{R367TER_SFKDIV78, 0x20},
{R367TER_SFDILSTKM, 0x00},
{R367TER_SFDILSTKL, 0x00},
{R367TER_SFSTATUS, 0xb5},
{R367TER_SFDLYH, 0x90},
{R367TER_SFDLYM, 0x60},
{R367TER_SFDLYL, 0x01},
{R367TER_SFDLYSETH, 0xc0},
{R367TER_SFDLYSETM, 0x60},
{R367TER_SFDLYSETL, 0x00},
{R367TER_SFOBSCFG, 0x00},
{R367TER_SFOBSM, 0x47},
{R367TER_SFOBSL, 0x05},
{R367TER_SFECINFO, 0x40},
{R367TER_SFERRCTRL, 0x74},
{R367TER_SFERRCNTH, 0x80},
{R367TER_SFERRCNTM , 0x00},
{R367TER_SFERRCNTL, 0x00},
{R367TER_SYMBRATEM, 0x2f},
{R367TER_SYMBRATEL, 0x50},
{R367TER_SYMBSTATUS, 0x7f},
{R367TER_SYMBCFG, 0x00},
{R367TER_SYMBFIFOM, 0xf4},
{R367TER_SYMBFIFOL, 0x0d},
{R367TER_SYMBOFFSM, 0xf0},
{R367TER_SYMBOFFSL, 0x2d},
{R367TER_DEBUG_LT4, 0x00},
{R367TER_DEBUG_LT5, 0x00},
{R367TER_DEBUG_LT6, 0x00},
{R367TER_DEBUG_LT7, 0x00},
{R367TER_DEBUG_LT8, 0x00},
{R367TER_DEBUG_LT9, 0x00},
};
#define RF_LOOKUP_TABLE_SIZE 31
#define RF_LOOKUP_TABLE2_SIZE 16
/* RF Level (for RF AGC->AGC1) Lookup Table, depends on the board and tuner.*/
[media] stv0367: fix sparse warnings drivers/media/dvb-frontends/stv0367.c:557:5: warning: symbol 'stv0367cab_RF_LookUp1' was not declared. Should it be static? drivers/media/dvb-frontends/stv0367.c:569:5: warning: symbol 'stv0367cab_RF_LookUp2' was not declared. Should it be static? Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21 06:30:33 +08:00
static const s32 stv0367cab_RF_LookUp1[RF_LOOKUP_TABLE_SIZE][RF_LOOKUP_TABLE_SIZE] = {
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
{/*AGC1*/
48, 50, 51, 53, 54, 56, 57, 58, 60, 61, 62, 63,
64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75,
76, 77, 78, 80, 83, 85, 88,
}, {/*RF(dbm)*/
22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,
34, 35, 36, 37, 38, 39, 41, 42, 43, 44, 46, 47,
49, 50, 52, 53, 54, 55, 56,
}
};
/* RF Level (for IF AGC->AGC2) Lookup Table, depends on the board and tuner.*/
[media] stv0367: fix sparse warnings drivers/media/dvb-frontends/stv0367.c:557:5: warning: symbol 'stv0367cab_RF_LookUp1' was not declared. Should it be static? drivers/media/dvb-frontends/stv0367.c:569:5: warning: symbol 'stv0367cab_RF_LookUp2' was not declared. Should it be static? Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21 06:30:33 +08:00
static const s32 stv0367cab_RF_LookUp2[RF_LOOKUP_TABLE2_SIZE][RF_LOOKUP_TABLE2_SIZE] = {
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
{/*AGC2*/
28, 29, 31, 32, 34, 35, 36, 37,
38, 39, 40, 41, 42, 43, 44, 45,
}, {/*RF(dbm)*/
57, 58, 59, 60, 61, 62, 63, 64,
65, 66, 67, 68, 69, 70, 71, 72,
}
};
static struct st_register def0367cab[STV0367CAB_NBREGS] = {
{R367CAB_ID, 0x60},
{R367CAB_I2CRPT, 0xa0},
/*{R367CAB_I2CRPT, 0x22},*/
{R367CAB_TOPCTRL, 0x10},
{R367CAB_IOCFG0, 0x80},
{R367CAB_DAC0R, 0x00},
{R367CAB_IOCFG1, 0x00},
{R367CAB_DAC1R, 0x00},
{R367CAB_IOCFG2, 0x00},
{R367CAB_SDFR, 0x00},
{R367CAB_AUX_CLK, 0x00},
{R367CAB_FREESYS1, 0x00},
{R367CAB_FREESYS2, 0x00},
{R367CAB_FREESYS3, 0x00},
{R367CAB_GPIO_CFG, 0x55},
{R367CAB_GPIO_CMD, 0x01},
{R367CAB_TSTRES, 0x00},
{R367CAB_ANACTRL, 0x0d},/* was 0x00 need to check - I.M.L.*/
{R367CAB_TSTBUS, 0x00},
{R367CAB_RF_AGC1, 0xea},
{R367CAB_RF_AGC2, 0x82},
{R367CAB_ANADIGCTRL, 0x0b},
{R367CAB_PLLMDIV, 0x01},
{R367CAB_PLLNDIV, 0x08},
{R367CAB_PLLSETUP, 0x18},
[media] stv0367: change default value for AGC register Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-02 20:11:00 +08:00
{R367CAB_DUAL_AD12, 0x0C}, /* for xc5000 AGC voltage 1.6V */
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
{R367CAB_TSTBIST, 0x00},
{R367CAB_CTRL_1, 0x00},
{R367CAB_CTRL_2, 0x03},
{R367CAB_IT_STATUS1, 0x2b},
{R367CAB_IT_STATUS2, 0x08},
{R367CAB_IT_EN1, 0x00},
{R367CAB_IT_EN2, 0x00},
{R367CAB_CTRL_STATUS, 0x04},
{R367CAB_TEST_CTL, 0x00},
{R367CAB_AGC_CTL, 0x73},
{R367CAB_AGC_IF_CFG, 0x50},
{R367CAB_AGC_RF_CFG, 0x00},
{R367CAB_AGC_PWM_CFG, 0x03},
{R367CAB_AGC_PWR_REF_L, 0x5a},
{R367CAB_AGC_PWR_REF_H, 0x00},
{R367CAB_AGC_RF_TH_L, 0xff},
{R367CAB_AGC_RF_TH_H, 0x07},
{R367CAB_AGC_IF_LTH_L, 0x00},
{R367CAB_AGC_IF_LTH_H, 0x08},
{R367CAB_AGC_IF_HTH_L, 0xff},
{R367CAB_AGC_IF_HTH_H, 0x07},
{R367CAB_AGC_PWR_RD_L, 0xa0},
{R367CAB_AGC_PWR_RD_M, 0xe9},
{R367CAB_AGC_PWR_RD_H, 0x03},
{R367CAB_AGC_PWM_IFCMD_L, 0xe4},
{R367CAB_AGC_PWM_IFCMD_H, 0x00},
{R367CAB_AGC_PWM_RFCMD_L, 0xff},
{R367CAB_AGC_PWM_RFCMD_H, 0x07},
{R367CAB_IQDEM_CFG, 0x01},
{R367CAB_MIX_NCO_LL, 0x22},
{R367CAB_MIX_NCO_HL, 0x96},
{R367CAB_MIX_NCO_HH, 0x55},
{R367CAB_SRC_NCO_LL, 0xff},
{R367CAB_SRC_NCO_LH, 0x0c},
{R367CAB_SRC_NCO_HL, 0xf5},
{R367CAB_SRC_NCO_HH, 0x20},
{R367CAB_IQDEM_GAIN_SRC_L, 0x06},
{R367CAB_IQDEM_GAIN_SRC_H, 0x01},
{R367CAB_IQDEM_DCRM_CFG_LL, 0xfe},
{R367CAB_IQDEM_DCRM_CFG_LH, 0xff},
{R367CAB_IQDEM_DCRM_CFG_HL, 0x0f},
{R367CAB_IQDEM_DCRM_CFG_HH, 0x00},
{R367CAB_IQDEM_ADJ_COEFF0, 0x34},
{R367CAB_IQDEM_ADJ_COEFF1, 0xae},
{R367CAB_IQDEM_ADJ_COEFF2, 0x46},
{R367CAB_IQDEM_ADJ_COEFF3, 0x77},
{R367CAB_IQDEM_ADJ_COEFF4, 0x96},
{R367CAB_IQDEM_ADJ_COEFF5, 0x69},
{R367CAB_IQDEM_ADJ_COEFF6, 0xc7},
{R367CAB_IQDEM_ADJ_COEFF7, 0x01},
{R367CAB_IQDEM_ADJ_EN, 0x04},
{R367CAB_IQDEM_ADJ_AGC_REF, 0x94},
{R367CAB_ALLPASSFILT1, 0xc9},
{R367CAB_ALLPASSFILT2, 0x2d},
{R367CAB_ALLPASSFILT3, 0xa3},
{R367CAB_ALLPASSFILT4, 0xfb},
{R367CAB_ALLPASSFILT5, 0xf6},
{R367CAB_ALLPASSFILT6, 0x45},
{R367CAB_ALLPASSFILT7, 0x6f},
{R367CAB_ALLPASSFILT8, 0x7e},
{R367CAB_ALLPASSFILT9, 0x05},
{R367CAB_ALLPASSFILT10, 0x0a},
{R367CAB_ALLPASSFILT11, 0x51},
{R367CAB_TRL_AGC_CFG, 0x20},
{R367CAB_TRL_LPF_CFG, 0x28},
{R367CAB_TRL_LPF_ACQ_GAIN, 0x44},
{R367CAB_TRL_LPF_TRK_GAIN, 0x22},
{R367CAB_TRL_LPF_OUT_GAIN, 0x03},
{R367CAB_TRL_LOCKDET_LTH, 0x04},
{R367CAB_TRL_LOCKDET_HTH, 0x11},
{R367CAB_TRL_LOCKDET_TRGVAL, 0x20},
{R367CAB_IQ_QAM, 0x01},
{R367CAB_FSM_STATE, 0xa0},
{R367CAB_FSM_CTL, 0x08},
{R367CAB_FSM_STS, 0x0c},
{R367CAB_FSM_SNR0_HTH, 0x00},
{R367CAB_FSM_SNR1_HTH, 0x00},
{R367CAB_FSM_SNR2_HTH, 0x23},/* 0x00 */
{R367CAB_FSM_SNR0_LTH, 0x00},
{R367CAB_FSM_SNR1_LTH, 0x00},
{R367CAB_FSM_EQA1_HTH, 0x00},
{R367CAB_FSM_TEMPO, 0x32},
{R367CAB_FSM_CONFIG, 0x03},
{R367CAB_EQU_I_TESTTAP_L, 0x11},
{R367CAB_EQU_I_TESTTAP_M, 0x00},
{R367CAB_EQU_I_TESTTAP_H, 0x00},
{R367CAB_EQU_TESTAP_CFG, 0x00},
{R367CAB_EQU_Q_TESTTAP_L, 0xff},
{R367CAB_EQU_Q_TESTTAP_M, 0x00},
{R367CAB_EQU_Q_TESTTAP_H, 0x00},
{R367CAB_EQU_TAP_CTRL, 0x00},
{R367CAB_EQU_CTR_CRL_CONTROL_L, 0x11},
{R367CAB_EQU_CTR_CRL_CONTROL_H, 0x05},
{R367CAB_EQU_CTR_HIPOW_L, 0x00},
{R367CAB_EQU_CTR_HIPOW_H, 0x00},
{R367CAB_EQU_I_EQU_LO, 0xef},
{R367CAB_EQU_I_EQU_HI, 0x00},
{R367CAB_EQU_Q_EQU_LO, 0xee},
{R367CAB_EQU_Q_EQU_HI, 0x00},
{R367CAB_EQU_MAPPER, 0xc5},
{R367CAB_EQU_SWEEP_RATE, 0x80},
{R367CAB_EQU_SNR_LO, 0x64},
{R367CAB_EQU_SNR_HI, 0x03},
{R367CAB_EQU_GAMMA_LO, 0x00},
{R367CAB_EQU_GAMMA_HI, 0x00},
{R367CAB_EQU_ERR_GAIN, 0x36},
{R367CAB_EQU_RADIUS, 0xaa},
{R367CAB_EQU_FFE_MAINTAP, 0x00},
{R367CAB_EQU_FFE_LEAKAGE, 0x63},
{R367CAB_EQU_FFE_MAINTAP_POS, 0xdf},
{R367CAB_EQU_GAIN_WIDE, 0x88},
{R367CAB_EQU_GAIN_NARROW, 0x41},
{R367CAB_EQU_CTR_LPF_GAIN, 0xd1},
{R367CAB_EQU_CRL_LPF_GAIN, 0xa7},
{R367CAB_EQU_GLOBAL_GAIN, 0x06},
{R367CAB_EQU_CRL_LD_SEN, 0x85},
{R367CAB_EQU_CRL_LD_VAL, 0xe2},
{R367CAB_EQU_CRL_TFR, 0x20},
{R367CAB_EQU_CRL_BISTH_LO, 0x00},
{R367CAB_EQU_CRL_BISTH_HI, 0x00},
{R367CAB_EQU_SWEEP_RANGE_LO, 0x00},
{R367CAB_EQU_SWEEP_RANGE_HI, 0x00},
{R367CAB_EQU_CRL_LIMITER, 0x40},
{R367CAB_EQU_MODULUS_MAP, 0x90},
{R367CAB_EQU_PNT_GAIN, 0xa7},
{R367CAB_FEC_AC_CTR_0, 0x16},
{R367CAB_FEC_AC_CTR_1, 0x0b},
{R367CAB_FEC_AC_CTR_2, 0x88},
{R367CAB_FEC_AC_CTR_3, 0x02},
{R367CAB_FEC_STATUS, 0x12},
{R367CAB_RS_COUNTER_0, 0x7d},
{R367CAB_RS_COUNTER_1, 0xd0},
{R367CAB_RS_COUNTER_2, 0x19},
{R367CAB_RS_COUNTER_3, 0x0b},
{R367CAB_RS_COUNTER_4, 0xa3},
{R367CAB_RS_COUNTER_5, 0x00},
{R367CAB_BERT_0, 0x01},
{R367CAB_BERT_1, 0x25},
{R367CAB_BERT_2, 0x41},
{R367CAB_BERT_3, 0x39},
{R367CAB_OUTFORMAT_0, 0xc2},
{R367CAB_OUTFORMAT_1, 0x22},
{R367CAB_SMOOTHER_2, 0x28},
{R367CAB_TSMF_CTRL_0, 0x01},
{R367CAB_TSMF_CTRL_1, 0xc6},
{R367CAB_TSMF_CTRL_3, 0x43},
{R367CAB_TS_ON_ID_0, 0x00},
{R367CAB_TS_ON_ID_1, 0x00},
{R367CAB_TS_ON_ID_2, 0x00},
{R367CAB_TS_ON_ID_3, 0x00},
{R367CAB_RE_STATUS_0, 0x00},
{R367CAB_RE_STATUS_1, 0x00},
{R367CAB_RE_STATUS_2, 0x00},
{R367CAB_RE_STATUS_3, 0x00},
{R367CAB_TS_STATUS_0, 0x00},
{R367CAB_TS_STATUS_1, 0x00},
{R367CAB_TS_STATUS_2, 0xa0},
{R367CAB_TS_STATUS_3, 0x00},
{R367CAB_T_O_ID_0, 0x00},
{R367CAB_T_O_ID_1, 0x00},
{R367CAB_T_O_ID_2, 0x00},
{R367CAB_T_O_ID_3, 0x00},
};
static
int stv0367_writeregs(struct stv0367_state *state, u16 reg, u8 *data, int len)
{
[media] stv0367: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/stv0367.c:791:1: warning: 'stv0367_writeregs.constprop.4' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 16:17:01 +08:00
u8 buf[MAX_XFER_SIZE];
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
struct i2c_msg msg = {
.addr = state->config->demod_address,
.flags = 0,
.buf = buf,
.len = len + 2
};
int ret;
[media] stv0367: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/stv0367.c:791:1: warning: 'stv0367_writeregs.constprop.4' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 16:17:01 +08:00
if (2 + len > sizeof(buf)) {
printk(KERN_WARNING
"%s: i2c wr reg=%04x: len=%d is too big!\n",
KBUILD_MODNAME, reg, len);
return -EINVAL;
}
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
buf[0] = MSB(reg);
buf[1] = LSB(reg);
memcpy(buf + 2, data, len);
if (i2cdebug)
printk(KERN_DEBUG "%s: %02x: %02x\n", __func__, reg, buf[2]);
ret = i2c_transfer(state->i2c, &msg, 1);
if (ret != 1)
printk(KERN_ERR "%s: i2c write error!\n", __func__);
return (ret != 1) ? -EREMOTEIO : 0;
}
static int stv0367_writereg(struct stv0367_state *state, u16 reg, u8 data)
{
return stv0367_writeregs(state, reg, &data, 1);
}
static u8 stv0367_readreg(struct stv0367_state *state, u16 reg)
{
u8 b0[] = { 0, 0 };
u8 b1[] = { 0 };
struct i2c_msg msg[] = {
{
.addr = state->config->demod_address,
.flags = 0,
.buf = b0,
.len = 2
}, {
.addr = state->config->demod_address,
.flags = I2C_M_RD,
.buf = b1,
.len = 1
}
};
int ret;
b0[0] = MSB(reg);
b0[1] = LSB(reg);
ret = i2c_transfer(state->i2c, msg, 2);
if (ret != 2)
printk(KERN_ERR "%s: i2c read error\n", __func__);
if (i2cdebug)
printk(KERN_DEBUG "%s: %02x: %02x\n", __func__, reg, b1[0]);
return b1[0];
}
static void extract_mask_pos(u32 label, u8 *mask, u8 *pos)
{
u8 position = 0, i = 0;
(*mask) = label & 0xff;
while ((position == 0) && (i < 8)) {
position = ((*mask) >> i) & 0x01;
i++;
}
(*pos) = (i - 1);
}
static void stv0367_writebits(struct stv0367_state *state, u32 label, u8 val)
{
u8 reg, mask, pos;
reg = stv0367_readreg(state, (label >> 16) & 0xffff);
extract_mask_pos(label, &mask, &pos);
val = mask & (val << pos);
reg = (reg & (~mask)) | val;
stv0367_writereg(state, (label >> 16) & 0xffff, reg);
}
static void stv0367_setbits(u8 *reg, u32 label, u8 val)
{
u8 mask, pos;
extract_mask_pos(label, &mask, &pos);
val = mask & (val << pos);
(*reg) = ((*reg) & (~mask)) | val;
}
static u8 stv0367_readbits(struct stv0367_state *state, u32 label)
{
u8 val = 0xff;
u8 mask, pos;
extract_mask_pos(label, &mask, &pos);
val = stv0367_readreg(state, label >> 16);
val = (val & mask) >> pos;
return val;
}
[media] stv0367: get rid of warning: no previous prototype drivers/media/dvb-frontends/stv0367.c:1267:25: warning: no previous prototype for 'stv0367ter_lock_algo' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:1531:5: warning: no previous prototype for 'stv0367ter_init' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:2381:21: warning: no previous prototype for 'stv0367cab_SetQamSize' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:2765:5: warning: no previous prototype for 'stv0367cab_init' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:882:4: warning: no previous prototype for 'stv0367_getbits' [-Wmissing-prototypes] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-27 22:26:42 +08:00
#if 0 /* Currently, unused */
static u8 stv0367_getbits(u8 reg, u32 label)
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
{
u8 mask, pos;
extract_mask_pos(label, &mask, &pos);
return (reg & mask) >> pos;
}
[media] stv0367: get rid of warning: no previous prototype drivers/media/dvb-frontends/stv0367.c:1267:25: warning: no previous prototype for 'stv0367ter_lock_algo' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:1531:5: warning: no previous prototype for 'stv0367ter_init' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:2381:21: warning: no previous prototype for 'stv0367cab_SetQamSize' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:2765:5: warning: no previous prototype for 'stv0367cab_init' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:882:4: warning: no previous prototype for 'stv0367_getbits' [-Wmissing-prototypes] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-27 22:26:42 +08:00
#endif
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
static int stv0367ter_gate_ctrl(struct dvb_frontend *fe, int enable)
{
struct stv0367_state *state = fe->demodulator_priv;
u8 tmp = stv0367_readreg(state, R367TER_I2CRPT);
dprintk("%s:\n", __func__);
if (enable) {
stv0367_setbits(&tmp, F367TER_STOP_ENABLE, 0);
stv0367_setbits(&tmp, F367TER_I2CT_ON, 1);
} else {
stv0367_setbits(&tmp, F367TER_STOP_ENABLE, 1);
stv0367_setbits(&tmp, F367TER_I2CT_ON, 0);
}
stv0367_writereg(state, R367TER_I2CRPT, tmp);
return 0;
}
static u32 stv0367_get_tuner_freq(struct dvb_frontend *fe)
{
[media] Remove checks of struct member addresses This removes checks of struct member addresses since they likely result in the condition always being true. Also in the stb6100_get_bandwidth and tda8261_get_bandwidth functions the pointers frontend_ops and tuner_ops are assigned the same addresses twice. Signed-off-by: Emil Goode <emilgoode@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-25 05:42:27 +08:00
struct dvb_frontend_ops *frontend_ops = &fe->ops;
struct dvb_tuner_ops *tuner_ops = &frontend_ops->tuner_ops;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
u32 freq = 0;
[media] stv0367: signedness bug in stv0367_get_tuner_freq() We use err to store negative error codes so it should be signed. And if we return an error from stv0367_get_tuner_freq() that needs to be handled properly as well. (param->frequency is a u32). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-06 21:40:11 +08:00
int err = 0;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
dprintk("%s:\n", __func__);
if (tuner_ops->get_frequency) {
err = tuner_ops->get_frequency(fe, &freq);
if (err < 0) {
printk(KERN_ERR "%s: Invalid parameter\n", __func__);
return err;
}
dprintk("%s: frequency=%d\n", __func__, freq);
} else
return -1;
return freq;
}
static u16 CellsCoeffs_8MHz_367cofdm[3][6][5] = {
{
{0x10EF, 0xE205, 0x10EF, 0xCE49, 0x6DA7}, /* CELL 1 COEFFS 27M*/
{0x2151, 0xc557, 0x2151, 0xc705, 0x6f93}, /* CELL 2 COEFFS */
{0x2503, 0xc000, 0x2503, 0xc375, 0x7194}, /* CELL 3 COEFFS */
{0x20E9, 0xca94, 0x20e9, 0xc153, 0x7194}, /* CELL 4 COEFFS */
{0x06EF, 0xF852, 0x06EF, 0xC057, 0x7207}, /* CELL 5 COEFFS */
{0x0000, 0x0ECC, 0x0ECC, 0x0000, 0x3647} /* CELL 6 COEFFS */
}, {
{0x10A0, 0xE2AF, 0x10A1, 0xCE76, 0x6D6D}, /* CELL 1 COEFFS 25M*/
{0x20DC, 0xC676, 0x20D9, 0xC80A, 0x6F29},
{0x2532, 0xC000, 0x251D, 0xC391, 0x706F},
{0x1F7A, 0xCD2B, 0x2032, 0xC15E, 0x711F},
{0x0698, 0xFA5E, 0x0568, 0xC059, 0x7193},
{0x0000, 0x0918, 0x149C, 0x0000, 0x3642} /* CELL 6 COEFFS */
}, {
{0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, /* 30M */
{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
{0x0000, 0x0000, 0x0000, 0x0000, 0x0000}
}
};
static u16 CellsCoeffs_7MHz_367cofdm[3][6][5] = {
{
{0x12CA, 0xDDAF, 0x12CA, 0xCCEB, 0x6FB1}, /* CELL 1 COEFFS 27M*/
{0x2329, 0xC000, 0x2329, 0xC6B0, 0x725F}, /* CELL 2 COEFFS */
{0x2394, 0xC000, 0x2394, 0xC2C7, 0x7410}, /* CELL 3 COEFFS */
{0x251C, 0xC000, 0x251C, 0xC103, 0x74D9}, /* CELL 4 COEFFS */
{0x0804, 0xF546, 0x0804, 0xC040, 0x7544}, /* CELL 5 COEFFS */
{0x0000, 0x0CD9, 0x0CD9, 0x0000, 0x370A} /* CELL 6 COEFFS */
}, {
{0x1285, 0xDE47, 0x1285, 0xCD17, 0x6F76}, /*25M*/
{0x234C, 0xC000, 0x2348, 0xC6DA, 0x7206},
{0x23B4, 0xC000, 0x23AC, 0xC2DB, 0x73B3},
{0x253D, 0xC000, 0x25B6, 0xC10B, 0x747F},
{0x0721, 0xF79C, 0x065F, 0xC041, 0x74EB},
{0x0000, 0x08FA, 0x1162, 0x0000, 0x36FF}
}, {
{0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, /* 30M */
{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
{0x0000, 0x0000, 0x0000, 0x0000, 0x0000}
}
};
static u16 CellsCoeffs_6MHz_367cofdm[3][6][5] = {
{
{0x1699, 0xD5B8, 0x1699, 0xCBC3, 0x713B}, /* CELL 1 COEFFS 27M*/
{0x2245, 0xC000, 0x2245, 0xC568, 0x74D5}, /* CELL 2 COEFFS */
{0x227F, 0xC000, 0x227F, 0xC1FC, 0x76C6}, /* CELL 3 COEFFS */
{0x235E, 0xC000, 0x235E, 0xC0A7, 0x778A}, /* CELL 4 COEFFS */
{0x0ECB, 0xEA0B, 0x0ECB, 0xC027, 0x77DD}, /* CELL 5 COEFFS */
{0x0000, 0x0B68, 0x0B68, 0x0000, 0xC89A}, /* CELL 6 COEFFS */
}, {
{0x1655, 0xD64E, 0x1658, 0xCBEF, 0x70FE}, /*25M*/
{0x225E, 0xC000, 0x2256, 0xC589, 0x7489},
{0x2293, 0xC000, 0x2295, 0xC209, 0x767E},
{0x2377, 0xC000, 0x23AA, 0xC0AB, 0x7746},
{0x0DC7, 0xEBC8, 0x0D07, 0xC027, 0x7799},
{0x0000, 0x0888, 0x0E9C, 0x0000, 0x3757}
}, {
{0x0000, 0x0000, 0x0000, 0x0000, 0x0000}, /* 30M */
{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
{0x0000, 0x0000, 0x0000, 0x0000, 0x0000},
{0x0000, 0x0000, 0x0000, 0x0000, 0x0000}
}
};
static u32 stv0367ter_get_mclk(struct stv0367_state *state, u32 ExtClk_Hz)
{
u32 mclk_Hz = 0; /* master clock frequency (Hz) */
u32 m, n, p;
dprintk("%s:\n", __func__);
if (stv0367_readbits(state, F367TER_BYPASS_PLLXN) == 0) {
n = (u32)stv0367_readbits(state, F367TER_PLL_NDIV);
if (n == 0)
n = n + 1;
m = (u32)stv0367_readbits(state, F367TER_PLL_MDIV);
if (m == 0)
m = m + 1;
p = (u32)stv0367_readbits(state, F367TER_PLL_PDIV);
if (p > 5)
p = 5;
mclk_Hz = ((ExtClk_Hz / 2) * n) / (m * (1 << p));
dprintk("N=%d M=%d P=%d mclk_Hz=%d ExtClk_Hz=%d\n",
n, m, p, mclk_Hz, ExtClk_Hz);
} else
mclk_Hz = ExtClk_Hz;
dprintk("%s: mclk_Hz=%d\n", __func__, mclk_Hz);
return mclk_Hz;
}
static int stv0367ter_filt_coeff_init(struct stv0367_state *state,
[media] stv0367: typo in function parameter The CellsCoeffs arrays are [3][6][5] not [2][6][5]. Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-06 21:41:23 +08:00
u16 CellsCoeffs[3][6][5], u32 DemodXtal)
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
{
int i, j, k, freq;
dprintk("%s:\n", __func__);
freq = stv0367ter_get_mclk(state, DemodXtal);
if (freq == 53125000)
k = 1; /* equivalent to Xtal 25M on 362*/
else if (freq == 54000000)
k = 0; /* equivalent to Xtal 27M on 362*/
else if (freq == 52500000)
k = 2; /* equivalent to Xtal 30M on 362*/
else
return 0;
for (i = 1; i <= 6; i++) {
stv0367_writebits(state, F367TER_IIR_CELL_NB, i - 1);
for (j = 1; j <= 5; j++) {
stv0367_writereg(state,
(R367TER_IIRCX_COEFF1_MSB + 2 * (j - 1)),
MSB(CellsCoeffs[k][i-1][j-1]));
stv0367_writereg(state,
(R367TER_IIRCX_COEFF1_LSB + 2 * (j - 1)),
LSB(CellsCoeffs[k][i-1][j-1]));
}
}
return 1;
}
static void stv0367ter_agc_iir_lock_detect_set(struct stv0367_state *state)
{
dprintk("%s:\n", __func__);
stv0367_writebits(state, F367TER_LOCK_DETECT_LSB, 0x00);
/* Lock detect 1 */
stv0367_writebits(state, F367TER_LOCK_DETECT_CHOICE, 0x00);
stv0367_writebits(state, F367TER_LOCK_DETECT_MSB, 0x06);
stv0367_writebits(state, F367TER_AUT_AGC_TARGET_LSB, 0x04);
/* Lock detect 2 */
stv0367_writebits(state, F367TER_LOCK_DETECT_CHOICE, 0x01);
stv0367_writebits(state, F367TER_LOCK_DETECT_MSB, 0x06);
stv0367_writebits(state, F367TER_AUT_AGC_TARGET_LSB, 0x04);
/* Lock detect 3 */
stv0367_writebits(state, F367TER_LOCK_DETECT_CHOICE, 0x02);
stv0367_writebits(state, F367TER_LOCK_DETECT_MSB, 0x01);
stv0367_writebits(state, F367TER_AUT_AGC_TARGET_LSB, 0x00);
/* Lock detect 4 */
stv0367_writebits(state, F367TER_LOCK_DETECT_CHOICE, 0x03);
stv0367_writebits(state, F367TER_LOCK_DETECT_MSB, 0x01);
stv0367_writebits(state, F367TER_AUT_AGC_TARGET_LSB, 0x00);
}
static int stv0367_iir_filt_init(struct stv0367_state *state, u8 Bandwidth,
u32 DemodXtalValue)
{
dprintk("%s:\n", __func__);
stv0367_writebits(state, F367TER_NRST_IIR, 0);
switch (Bandwidth) {
case 6:
if (!stv0367ter_filt_coeff_init(state,
CellsCoeffs_6MHz_367cofdm,
DemodXtalValue))
return 0;
break;
case 7:
if (!stv0367ter_filt_coeff_init(state,
CellsCoeffs_7MHz_367cofdm,
DemodXtalValue))
return 0;
break;
case 8:
if (!stv0367ter_filt_coeff_init(state,
CellsCoeffs_8MHz_367cofdm,
DemodXtalValue))
return 0;
break;
default:
return 0;
}
stv0367_writebits(state, F367TER_NRST_IIR, 1);
return 1;
}
static void stv0367ter_agc_iir_rst(struct stv0367_state *state)
{
u8 com_n;
dprintk("%s:\n", __func__);
com_n = stv0367_readbits(state, F367TER_COM_N);
stv0367_writebits(state, F367TER_COM_N, 0x07);
stv0367_writebits(state, F367TER_COM_SOFT_RSTN, 0x00);
stv0367_writebits(state, F367TER_COM_AGC_ON, 0x00);
stv0367_writebits(state, F367TER_COM_SOFT_RSTN, 0x01);
stv0367_writebits(state, F367TER_COM_AGC_ON, 0x01);
stv0367_writebits(state, F367TER_COM_N, com_n);
}
static int stv0367ter_duration(s32 mode, int tempo1, int tempo2, int tempo3)
{
int local_tempo = 0;
switch (mode) {
case 0:
local_tempo = tempo1;
break;
case 1:
local_tempo = tempo2;
break ;
case 2:
local_tempo = tempo3;
break;
default:
break;
}
/* msleep(local_tempo); */
return local_tempo;
}
static enum
stv0367_ter_signal_type stv0367ter_check_syr(struct stv0367_state *state)
{
int wd = 100;
unsigned short int SYR_var;
s32 SYRStatus;
dprintk("%s:\n", __func__);
SYR_var = stv0367_readbits(state, F367TER_SYR_LOCK);
while ((!SYR_var) && (wd > 0)) {
usleep_range(2000, 3000);
wd -= 2;
SYR_var = stv0367_readbits(state, F367TER_SYR_LOCK);
}
if (!SYR_var)
SYRStatus = FE_TER_NOSYMBOL;
else
SYRStatus = FE_TER_SYMBOLOK;
dprintk("stv0367ter_check_syr SYRStatus %s\n",
SYR_var == 0 ? "No Symbol" : "OK");
return SYRStatus;
}
static enum
stv0367_ter_signal_type stv0367ter_check_cpamp(struct stv0367_state *state,
s32 FFTmode)
{
s32 CPAMPvalue = 0, CPAMPStatus, CPAMPMin;
int wd = 0;
dprintk("%s:\n", __func__);
switch (FFTmode) {
case 0: /*2k mode*/
CPAMPMin = 20;
wd = 10;
break;
case 1: /*8k mode*/
CPAMPMin = 80;
wd = 55;
break;
case 2: /*4k mode*/
CPAMPMin = 40;
wd = 30;
break;
default:
CPAMPMin = 0xffff; /*drives to NOCPAMP */
break;
}
dprintk("%s: CPAMPMin=%d wd=%d\n", __func__, CPAMPMin, wd);
CPAMPvalue = stv0367_readbits(state, F367TER_PPM_CPAMP_DIRECT);
while ((CPAMPvalue < CPAMPMin) && (wd > 0)) {
usleep_range(1000, 2000);
wd -= 1;
CPAMPvalue = stv0367_readbits(state, F367TER_PPM_CPAMP_DIRECT);
/*dprintk("CPAMPvalue= %d at wd=%d\n",CPAMPvalue,wd); */
}
dprintk("******last CPAMPvalue= %d at wd=%d\n", CPAMPvalue, wd);
if (CPAMPvalue < CPAMPMin) {
CPAMPStatus = FE_TER_NOCPAMP;
printk(KERN_ERR "CPAMP failed\n");
} else {
printk(KERN_ERR "CPAMP OK !\n");
CPAMPStatus = FE_TER_CPAMPOK;
}
return CPAMPStatus;
}
[media] stv0367: get rid of warning: no previous prototype drivers/media/dvb-frontends/stv0367.c:1267:25: warning: no previous prototype for 'stv0367ter_lock_algo' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:1531:5: warning: no previous prototype for 'stv0367ter_init' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:2381:21: warning: no previous prototype for 'stv0367cab_SetQamSize' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:2765:5: warning: no previous prototype for 'stv0367cab_init' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:882:4: warning: no previous prototype for 'stv0367_getbits' [-Wmissing-prototypes] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-27 22:26:42 +08:00
static enum stv0367_ter_signal_type
stv0367ter_lock_algo(struct stv0367_state *state)
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
{
enum stv0367_ter_signal_type ret_flag;
short int wd, tempo;
u8 try, u_var1 = 0, u_var2 = 0, u_var3 = 0, u_var4 = 0, mode, guard;
u8 tmp, tmp2;
dprintk("%s:\n", __func__);
if (state == NULL)
return FE_TER_SWNOK;
try = 0;
do {
ret_flag = FE_TER_LOCKOK;
stv0367_writebits(state, F367TER_CORE_ACTIVE, 0);
if (state->config->if_iq_mode != 0)
stv0367_writebits(state, F367TER_COM_N, 0x07);
stv0367_writebits(state, F367TER_GUARD, 3);/* suggest 2k 1/4 */
stv0367_writebits(state, F367TER_MODE, 0);
stv0367_writebits(state, F367TER_SYR_TR_DIS, 0);
usleep_range(5000, 10000);
stv0367_writebits(state, F367TER_CORE_ACTIVE, 1);
if (stv0367ter_check_syr(state) == FE_TER_NOSYMBOL)
return FE_TER_NOSYMBOL;
else { /*
if chip locked on wrong mode first try,
it must lock correctly second try */
mode = stv0367_readbits(state, F367TER_SYR_MODE);
if (stv0367ter_check_cpamp(state, mode) ==
FE_TER_NOCPAMP) {
if (try == 0)
ret_flag = FE_TER_NOCPAMP;
}
}
try++;
} while ((try < 10) && (ret_flag != FE_TER_LOCKOK));
tmp = stv0367_readreg(state, R367TER_SYR_STAT);
tmp2 = stv0367_readreg(state, R367TER_STATUS);
[media] stv0367.c: fix compiler warning drivers/media/dvb/frontends/stv0367.c: In function 'stv0367ter_lock_algo': drivers/media/dvb/frontends/stv0367.c:1315:2: warning: cast from pointer to integer of different size Use %p to print addresses instead of 0x%x. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-06 20:26:24 +08:00
dprintk("state=%p\n", state);
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
dprintk("LOCK OK! mode=%d SYR_STAT=0x%x R367TER_STATUS=0x%x\n",
mode, tmp, tmp2);
tmp = stv0367_readreg(state, R367TER_PRVIT);
tmp2 = stv0367_readreg(state, R367TER_I2CRPT);
dprintk("PRVIT=0x%x I2CRPT=0x%x\n", tmp, tmp2);
tmp = stv0367_readreg(state, R367TER_GAIN_SRC1);
dprintk("GAIN_SRC1=0x%x\n", tmp);
if ((mode != 0) && (mode != 1) && (mode != 2))
return FE_TER_SWNOK;
/*guard=stv0367_readbits(state,F367TER_SYR_GUARD); */
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 09:57:33 +08:00
/*suppress EPQ auto for SYR_GARD 1/16 or 1/32
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
and set channel predictor in automatic */
#if 0
switch (guard) {
case 0:
case 1:
stv0367_writebits(state, F367TER_AUTO_LE_EN, 0);
stv0367_writereg(state, R367TER_CHC_CTL, 0x01);
break;
case 2:
case 3:
stv0367_writebits(state, F367TER_AUTO_LE_EN, 1);
stv0367_writereg(state, R367TER_CHC_CTL, 0x11);
break;
default:
return FE_TER_SWNOK;
}
#endif
/*reset fec an reedsolo FOR 367 only*/
stv0367_writebits(state, F367TER_RST_SFEC, 1);
stv0367_writebits(state, F367TER_RST_REEDSOLO, 1);
usleep_range(1000, 2000);
stv0367_writebits(state, F367TER_RST_SFEC, 0);
stv0367_writebits(state, F367TER_RST_REEDSOLO, 0);
u_var1 = stv0367_readbits(state, F367TER_LK);
u_var2 = stv0367_readbits(state, F367TER_PRF);
u_var3 = stv0367_readbits(state, F367TER_TPS_LOCK);
/* u_var4=stv0367_readbits(state,F367TER_TSFIFO_LINEOK); */
wd = stv0367ter_duration(mode, 125, 500, 250);
tempo = stv0367ter_duration(mode, 4, 16, 8);
/*while ( ((!u_var1)||(!u_var2)||(!u_var3)||(!u_var4)) && (wd>=0)) */
while (((!u_var1) || (!u_var2) || (!u_var3)) && (wd >= 0)) {
usleep_range(1000 * tempo, 1000 * (tempo + 1));
wd -= tempo;
u_var1 = stv0367_readbits(state, F367TER_LK);
u_var2 = stv0367_readbits(state, F367TER_PRF);
u_var3 = stv0367_readbits(state, F367TER_TPS_LOCK);
/*u_var4=stv0367_readbits(state, F367TER_TSFIFO_LINEOK); */
}
if (!u_var1)
return FE_TER_NOLOCK;
if (!u_var2)
return FE_TER_NOPRFOUND;
if (!u_var3)
return FE_TER_NOTPS;
guard = stv0367_readbits(state, F367TER_SYR_GUARD);
stv0367_writereg(state, R367TER_CHC_CTL, 0x11);
switch (guard) {
case 0:
case 1:
stv0367_writebits(state, F367TER_AUTO_LE_EN, 0);
/*stv0367_writereg(state,R367TER_CHC_CTL, 0x1);*/
stv0367_writebits(state, F367TER_SYR_FILTER, 0);
break;
case 2:
case 3:
stv0367_writebits(state, F367TER_AUTO_LE_EN, 1);
/*stv0367_writereg(state,R367TER_CHC_CTL, 0x11);*/
stv0367_writebits(state, F367TER_SYR_FILTER, 1);
break;
default:
return FE_TER_SWNOK;
}
/* apply Sfec workaround if 8K 64QAM CR!=1/2*/
if ((stv0367_readbits(state, F367TER_TPS_CONST) == 2) &&
(mode == 1) &&
(stv0367_readbits(state, F367TER_TPS_HPCODE) != 0)) {
stv0367_writereg(state, R367TER_SFDLYSETH, 0xc0);
stv0367_writereg(state, R367TER_SFDLYSETM, 0x60);
stv0367_writereg(state, R367TER_SFDLYSETL, 0x0);
} else
stv0367_writereg(state, R367TER_SFDLYSETH, 0x0);
wd = stv0367ter_duration(mode, 125, 500, 250);
u_var4 = stv0367_readbits(state, F367TER_TSFIFO_LINEOK);
while ((!u_var4) && (wd >= 0)) {
usleep_range(1000 * tempo, 1000 * (tempo + 1));
wd -= tempo;
u_var4 = stv0367_readbits(state, F367TER_TSFIFO_LINEOK);
}
if (!u_var4)
return FE_TER_NOLOCK;
/* for 367 leave COM_N at 0x7 for IQ_mode*/
/*if(ter_state->if_iq_mode!=FE_TER_NORMAL_IF_TUNER) {
tempo=0;
while ((stv0367_readbits(state,F367TER_COM_USEGAINTRK)!=1) &&
(stv0367_readbits(state,F367TER_COM_AGCLOCK)!=1)&&(tempo<100)) {
ChipWaitOrAbort(state,1);
tempo+=1;
}
stv0367_writebits(state,F367TER_COM_N,0x17);
} */
stv0367_writebits(state, F367TER_SYR_TR_DIS, 1);
dprintk("FE_TER_LOCKOK !!!\n");
return FE_TER_LOCKOK;
}
static void stv0367ter_set_ts_mode(struct stv0367_state *state,
enum stv0367_ts_mode PathTS)
{
dprintk("%s:\n", __func__);
if (state == NULL)
return;
stv0367_writebits(state, F367TER_TS_DIS, 0);
switch (PathTS) {
default:
/*for removing warning :default we can assume in parallel mode*/
case STV0367_PARALLEL_PUNCT_CLOCK:
stv0367_writebits(state, F367TER_TSFIFO_SERIAL, 0);
stv0367_writebits(state, F367TER_TSFIFO_DVBCI, 0);
break;
case STV0367_SERIAL_PUNCT_CLOCK:
stv0367_writebits(state, F367TER_TSFIFO_SERIAL, 1);
stv0367_writebits(state, F367TER_TSFIFO_DVBCI, 1);
break;
}
}
static void stv0367ter_set_clk_pol(struct stv0367_state *state,
enum stv0367_clk_pol clock)
{
dprintk("%s:\n", __func__);
if (state == NULL)
return;
switch (clock) {
case STV0367_RISINGEDGE_CLOCK:
stv0367_writebits(state, F367TER_TS_BYTE_CLK_INV, 1);
break;
case STV0367_FALLINGEDGE_CLOCK:
stv0367_writebits(state, F367TER_TS_BYTE_CLK_INV, 0);
break;
/*case FE_TER_CLOCK_POLARITY_DEFAULT:*/
default:
stv0367_writebits(state, F367TER_TS_BYTE_CLK_INV, 0);
break;
}
}
#if 0
static void stv0367ter_core_sw(struct stv0367_state *state)
{
dprintk("%s:\n", __func__);
stv0367_writebits(state, F367TER_CORE_ACTIVE, 0);
stv0367_writebits(state, F367TER_CORE_ACTIVE, 1);
msleep(350);
}
#endif
static int stv0367ter_standby(struct dvb_frontend *fe, u8 standby_on)
{
struct stv0367_state *state = fe->demodulator_priv;
dprintk("%s:\n", __func__);
if (standby_on) {
stv0367_writebits(state, F367TER_STDBY, 1);
stv0367_writebits(state, F367TER_STDBY_FEC, 1);
stv0367_writebits(state, F367TER_STDBY_CORE, 1);
} else {
stv0367_writebits(state, F367TER_STDBY, 0);
stv0367_writebits(state, F367TER_STDBY_FEC, 0);
stv0367_writebits(state, F367TER_STDBY_CORE, 0);
}
return 0;
}
static int stv0367ter_sleep(struct dvb_frontend *fe)
{
return stv0367ter_standby(fe, 1);
}
[media] stv0367: get rid of warning: no previous prototype drivers/media/dvb-frontends/stv0367.c:1267:25: warning: no previous prototype for 'stv0367ter_lock_algo' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:1531:5: warning: no previous prototype for 'stv0367ter_init' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:2381:21: warning: no previous prototype for 'stv0367cab_SetQamSize' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:2765:5: warning: no previous prototype for 'stv0367cab_init' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:882:4: warning: no previous prototype for 'stv0367_getbits' [-Wmissing-prototypes] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-27 22:26:42 +08:00
static int stv0367ter_init(struct dvb_frontend *fe)
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
{
struct stv0367_state *state = fe->demodulator_priv;
struct stv0367ter_state *ter_state = state->ter_state;
int i;
dprintk("%s:\n", __func__);
ter_state->pBER = 0;
for (i = 0; i < STV0367TER_NBREGS; i++)
stv0367_writereg(state, def0367ter[i].addr,
def0367ter[i].value);
switch (state->config->xtal) {
/*set internal freq to 53.125MHz */
case 25000000:
stv0367_writereg(state, R367TER_PLLMDIV, 0xa);
stv0367_writereg(state, R367TER_PLLNDIV, 0x55);
stv0367_writereg(state, R367TER_PLLSETUP, 0x18);
break;
default:
case 27000000:
dprintk("FE_STV0367TER_SetCLKgen for 27Mhz\n");
stv0367_writereg(state, R367TER_PLLMDIV, 0x1);
stv0367_writereg(state, R367TER_PLLNDIV, 0x8);
stv0367_writereg(state, R367TER_PLLSETUP, 0x18);
break;
case 30000000:
stv0367_writereg(state, R367TER_PLLMDIV, 0xc);
stv0367_writereg(state, R367TER_PLLNDIV, 0x55);
stv0367_writereg(state, R367TER_PLLSETUP, 0x18);
break;
}
stv0367_writereg(state, R367TER_I2CRPT, 0xa0);
stv0367_writereg(state, R367TER_ANACTRL, 0x00);
/*Set TS1 and TS2 to serial or parallel mode */
stv0367ter_set_ts_mode(state, state->config->ts_mode);
stv0367ter_set_clk_pol(state, state->config->clk_pol);
state->chip_id = stv0367_readreg(state, R367TER_ID);
ter_state->first_lock = 0;
ter_state->unlock_counter = 2;
return 0;
}
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
static int stv0367ter_algo(struct dvb_frontend *fe)
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
{
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
struct stv0367_state *state = fe->demodulator_priv;
struct stv0367ter_state *ter_state = state->ter_state;
int offset = 0, tempo = 0;
u8 u_var;
[media] stv0367: variable 'tps_rcvd' set but not used Tested by compilation only. Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-15 00:58:14 +08:00
u8 /*constell,*/ counter;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
s8 step;
s32 timing_offset = 0;
u32 trl_nomrate = 0, InternalFreq = 0, temp = 0;
dprintk("%s:\n", __func__);
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
ter_state->frequency = p->frequency;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
ter_state->force = FE_TER_FORCENONE
+ stv0367_readbits(state, F367TER_FORCE) * 2;
ter_state->if_iq_mode = state->config->if_iq_mode;
switch (state->config->if_iq_mode) {
case FE_TER_NORMAL_IF_TUNER: /* Normal IF mode */
dprintk("ALGO: FE_TER_NORMAL_IF_TUNER selected\n");
stv0367_writebits(state, F367TER_TUNER_BB, 0);
stv0367_writebits(state, F367TER_LONGPATH_IF, 0);
stv0367_writebits(state, F367TER_DEMUX_SWAP, 0);
break;
case FE_TER_LONGPATH_IF_TUNER: /* Long IF mode */
dprintk("ALGO: FE_TER_LONGPATH_IF_TUNER selected\n");
stv0367_writebits(state, F367TER_TUNER_BB, 0);
stv0367_writebits(state, F367TER_LONGPATH_IF, 1);
stv0367_writebits(state, F367TER_DEMUX_SWAP, 1);
break;
case FE_TER_IQ_TUNER: /* IQ mode */
dprintk("ALGO: FE_TER_IQ_TUNER selected\n");
stv0367_writebits(state, F367TER_TUNER_BB, 1);
stv0367_writebits(state, F367TER_PPM_INVSEL, 0);
break;
default:
printk(KERN_ERR "ALGO: wrong TUNER type selected\n");
return -EINVAL;
}
usleep_range(5000, 7000);
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
switch (p->inversion) {
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
case INVERSION_AUTO:
default:
dprintk("%s: inversion AUTO\n", __func__);
if (ter_state->if_iq_mode == FE_TER_IQ_TUNER)
stv0367_writebits(state, F367TER_IQ_INVERT,
ter_state->sense);
else
stv0367_writebits(state, F367TER_INV_SPECTR,
ter_state->sense);
break;
case INVERSION_ON:
case INVERSION_OFF:
if (ter_state->if_iq_mode == FE_TER_IQ_TUNER)
stv0367_writebits(state, F367TER_IQ_INVERT,
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->inversion);
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
else
stv0367_writebits(state, F367TER_INV_SPECTR,
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->inversion);
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;
}
if ((ter_state->if_iq_mode != FE_TER_NORMAL_IF_TUNER) &&
(ter_state->pBW != ter_state->bw)) {
stv0367ter_agc_iir_lock_detect_set(state);
/*set fine agc target to 180 for LPIF or IQ mode*/
/* set Q_AGCTarget */
stv0367_writebits(state, F367TER_SEL_IQNTAR, 1);
stv0367_writebits(state, F367TER_AUT_AGC_TARGET_MSB, 0xB);
/*stv0367_writebits(state,AUT_AGC_TARGET_LSB,0x04); */
/* set Q_AGCTarget */
stv0367_writebits(state, F367TER_SEL_IQNTAR, 0);
stv0367_writebits(state, F367TER_AUT_AGC_TARGET_MSB, 0xB);
/*stv0367_writebits(state,AUT_AGC_TARGET_LSB,0x04); */
if (!stv0367_iir_filt_init(state, ter_state->bw,
state->config->xtal))
return -EINVAL;
/*set IIR filter once for 6,7 or 8MHz BW*/
ter_state->pBW = ter_state->bw;
stv0367ter_agc_iir_rst(state);
}
if (ter_state->hierarchy == FE_TER_HIER_LOW_PRIO)
stv0367_writebits(state, F367TER_BDI_LPSEL, 0x01);
else
stv0367_writebits(state, F367TER_BDI_LPSEL, 0x00);
InternalFreq = stv0367ter_get_mclk(state, state->config->xtal) / 1000;
temp = (int)
((((ter_state->bw * 64 * (1 << 15) * 100)
/ (InternalFreq)) * 10) / 7);
stv0367_writebits(state, F367TER_TRL_NOMRATE_LSB, temp % 2);
temp = temp / 2;
stv0367_writebits(state, F367TER_TRL_NOMRATE_HI, temp / 256);
stv0367_writebits(state, F367TER_TRL_NOMRATE_LO, temp % 256);
temp = stv0367_readbits(state, F367TER_TRL_NOMRATE_HI) * 512 +
stv0367_readbits(state, F367TER_TRL_NOMRATE_LO) * 2 +
stv0367_readbits(state, F367TER_TRL_NOMRATE_LSB);
temp = (int)(((1 << 17) * ter_state->bw * 1000) / (7 * (InternalFreq)));
stv0367_writebits(state, F367TER_GAIN_SRC_HI, temp / 256);
stv0367_writebits(state, F367TER_GAIN_SRC_LO, temp % 256);
temp = stv0367_readbits(state, F367TER_GAIN_SRC_HI) * 256 +
stv0367_readbits(state, F367TER_GAIN_SRC_LO);
temp = (int)
((InternalFreq - state->config->if_khz) * (1 << 16)
/ (InternalFreq));
dprintk("DEROT temp=0x%x\n", temp);
stv0367_writebits(state, F367TER_INC_DEROT_HI, temp / 256);
stv0367_writebits(state, F367TER_INC_DEROT_LO, temp % 256);
ter_state->echo_pos = 0;
ter_state->ucblocks = 0; /* liplianin */
ter_state->pBER = 0; /* liplianin */
stv0367_writebits(state, F367TER_LONG_ECHO, ter_state->echo_pos);
if (stv0367ter_lock_algo(state) != FE_TER_LOCKOK)
return 0;
ter_state->state = FE_TER_LOCKOK;
ter_state->mode = stv0367_readbits(state, F367TER_SYR_MODE);
ter_state->guard = stv0367_readbits(state, F367TER_SYR_GUARD);
ter_state->first_lock = 1; /* we know sense now :) */
ter_state->agc_val =
(stv0367_readbits(state, F367TER_AGC1_VAL_LO) << 16) +
(stv0367_readbits(state, F367TER_AGC1_VAL_HI) << 24) +
stv0367_readbits(state, F367TER_AGC2_VAL_LO) +
(stv0367_readbits(state, F367TER_AGC2_VAL_HI) << 8);
/* Carrier offset calculation */
stv0367_writebits(state, F367TER_FREEZE, 1);
offset = (stv0367_readbits(state, F367TER_CRL_FOFFSET_VHI) << 16) ;
offset += (stv0367_readbits(state, F367TER_CRL_FOFFSET_HI) << 8);
offset += (stv0367_readbits(state, F367TER_CRL_FOFFSET_LO));
stv0367_writebits(state, F367TER_FREEZE, 0);
if (offset > 8388607)
offset -= 16777216;
offset = offset * 2 / 16384;
if (ter_state->mode == FE_TER_MODE_2K)
offset = (offset * 4464) / 1000;/*** 1 FFT BIN=4.464khz***/
else if (ter_state->mode == FE_TER_MODE_4K)
offset = (offset * 223) / 100;/*** 1 FFT BIN=2.23khz***/
else if (ter_state->mode == FE_TER_MODE_8K)
offset = (offset * 111) / 100;/*** 1 FFT BIN=1.1khz***/
if (stv0367_readbits(state, F367TER_PPM_INVSEL) == 1) {
if ((stv0367_readbits(state, F367TER_INV_SPECTR) ==
(stv0367_readbits(state,
F367TER_STATUS_INV_SPECRUM) == 1)))
offset = offset * -1;
}
if (ter_state->bw == 6)
offset = (offset * 6) / 8;
else if (ter_state->bw == 7)
offset = (offset * 7) / 8;
ter_state->frequency += offset;
tempo = 10; /* exit even if timing_offset stays null */
while ((timing_offset == 0) && (tempo > 0)) {
usleep_range(10000, 20000); /*was 20ms */
/* fine tuning of timing offset if required */
timing_offset = stv0367_readbits(state, F367TER_TRL_TOFFSET_LO)
+ 256 * stv0367_readbits(state,
F367TER_TRL_TOFFSET_HI);
if (timing_offset >= 32768)
timing_offset -= 65536;
trl_nomrate = (512 * stv0367_readbits(state,
F367TER_TRL_NOMRATE_HI)
+ stv0367_readbits(state, F367TER_TRL_NOMRATE_LO) * 2
+ stv0367_readbits(state, F367TER_TRL_NOMRATE_LSB));
timing_offset = ((signed)(1000000 / trl_nomrate) *
timing_offset) / 2048;
tempo--;
}
if (timing_offset <= 0) {
timing_offset = (timing_offset - 11) / 22;
step = -1;
} else {
timing_offset = (timing_offset + 11) / 22;
step = 1;
}
for (counter = 0; counter < abs(timing_offset); counter++) {
trl_nomrate += step;
stv0367_writebits(state, F367TER_TRL_NOMRATE_LSB,
trl_nomrate % 2);
stv0367_writebits(state, F367TER_TRL_NOMRATE_LO,
trl_nomrate / 2);
usleep_range(1000, 2000);
}
usleep_range(5000, 6000);
/* unlocks could happen in case of trl centring big step,
then a core off/on restarts demod */
u_var = stv0367_readbits(state, F367TER_LK);
if (!u_var) {
stv0367_writebits(state, F367TER_CORE_ACTIVE, 0);
msleep(20);
stv0367_writebits(state, F367TER_CORE_ACTIVE, 1);
}
return 0;
}
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
static int stv0367ter_set_frontend(struct dvb_frontend *fe)
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
{
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
struct stv0367_state *state = fe->demodulator_priv;
struct stv0367ter_state *ter_state = state->ter_state;
/*u8 trials[2]; */
s8 num_trials, index;
u8 SenseTrials[] = { INVERSION_ON, INVERSION_OFF };
stv0367ter_init(fe);
if (fe->ops.tuner_ops.set_params) {
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
[media] tuners: remove dvb_frontend_parameters from set_params() This is a big patch, yet trivial: now that all tuners use the DVBv5 way to pass parameters (e. g. via fe->dtv_property_cache), the extra parameter can be removed from set_params() call. After this change, very few DVBv3 specific stuff are left at the tuners. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-24 23:24:33 +08:00
fe->ops.tuner_ops.set_params(fe);
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
}
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
switch (p->transmission_mode) {
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
default:
case TRANSMISSION_MODE_AUTO:
case TRANSMISSION_MODE_2K:
ter_state->mode = FE_TER_MODE_2K;
break;
/* case TRANSMISSION_MODE_4K:
pLook.mode = FE_TER_MODE_4K;
break;*/
case TRANSMISSION_MODE_8K:
ter_state->mode = FE_TER_MODE_8K;
break;
}
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
switch (p->guard_interval) {
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
default:
case GUARD_INTERVAL_1_32:
case GUARD_INTERVAL_1_16:
case GUARD_INTERVAL_1_8:
case GUARD_INTERVAL_1_4:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
ter_state->guard = p->guard_interval;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;
case GUARD_INTERVAL_AUTO:
ter_state->guard = GUARD_INTERVAL_1_32;
break;
}
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
switch (p->bandwidth_hz) {
case 6000000:
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
ter_state->bw = FE_TER_CHAN_BW_6M;
break;
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
case 7000000:
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
ter_state->bw = FE_TER_CHAN_BW_7M;
break;
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
case 8000000:
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
default:
ter_state->bw = FE_TER_CHAN_BW_8M;
}
ter_state->hierarchy = FE_TER_HIER_NONE;
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
switch (p->inversion) {
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
case INVERSION_OFF:
case INVERSION_ON:
num_trials = 1;
break;
default:
num_trials = 2;
if (ter_state->first_lock)
num_trials = 1;
break;
}
ter_state->state = FE_TER_NOLOCK;
index = 0;
while (((index) < num_trials) && (ter_state->state != FE_TER_LOCKOK)) {
if (!ter_state->first_lock) {
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
if (p->inversion == INVERSION_AUTO)
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
ter_state->sense = SenseTrials[index];
}
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
stv0367ter_algo(fe);
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
if ((ter_state->state == FE_TER_LOCKOK) &&
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
(p->inversion == INVERSION_AUTO) &&
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
(index == 1)) {
/* invert spectrum sense */
SenseTrials[index] = SenseTrials[0];
SenseTrials[(index + 1) % 2] = (SenseTrials[1] + 1) % 2;
}
index++;
}
return 0;
}
static int stv0367ter_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
{
struct stv0367_state *state = fe->demodulator_priv;
struct stv0367ter_state *ter_state = state->ter_state;
u32 errs = 0;
/*wait for counting completion*/
if (stv0367_readbits(state, F367TER_SFERRC_OLDVALUE) == 0) {
errs =
((u32)stv0367_readbits(state, F367TER_ERR_CNT1)
* (1 << 16))
+ ((u32)stv0367_readbits(state, F367TER_ERR_CNT1_HI)
* (1 << 8))
+ ((u32)stv0367_readbits(state, F367TER_ERR_CNT1_LO));
ter_state->ucblocks = errs;
}
(*ucblocks) = ter_state->ucblocks;
return 0;
}
[media] dvb: don't require a parameter for get_frontend Just like set_frontend, use the dvb cache properties for get_frontend. This is more consistent, as both functions are now symetric. Also, at the places get_frontend is called, it makes sense to update the cache. Most of this patch were generated by this small perl script: while (<>) { $file .= $_; } if ($file =~ m/\.get_frontend\s*=\s*([\d\w_]+)/) { my $get = $1; $file =~ s/($get)(\s*\([^\,\)]+)\,\s*struct\s+dtv_frontend_properties\s*\*\s*([_\d\w]+)\)\s*\{/\1\2)\n{\n\tstruct dtv_frontend_properties *\3 = &fe->dtv_property_cache;/g; } print $file; Of course, the changes at dvb_frontend.[ch] were made by hand, as well as the changes on a few other places, where get_frontend() is called internally inside the driver. On some places, get_frontend() were just a void function. Those occurrences were removed, as the DVB core handles such cases. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-30 22:30:21 +08:00
static int stv0367ter_get_frontend(struct dvb_frontend *fe)
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
{
[media] dvb: don't require a parameter for get_frontend Just like set_frontend, use the dvb cache properties for get_frontend. This is more consistent, as both functions are now symetric. Also, at the places get_frontend is called, it makes sense to update the cache. Most of this patch were generated by this small perl script: while (<>) { $file .= $_; } if ($file =~ m/\.get_frontend\s*=\s*([\d\w_]+)/) { my $get = $1; $file =~ s/($get)(\s*\([^\,\)]+)\,\s*struct\s+dtv_frontend_properties\s*\*\s*([_\d\w]+)\)\s*\{/\1\2)\n{\n\tstruct dtv_frontend_properties *\3 = &fe->dtv_property_cache;/g; } print $file; Of course, the changes at dvb_frontend.[ch] were made by hand, as well as the changes on a few other places, where get_frontend() is called internally inside the driver. On some places, get_frontend() were just a void function. Those occurrences were removed, as the DVB core handles such cases. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-30 22:30:21 +08:00
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
struct stv0367_state *state = fe->demodulator_priv;
struct stv0367ter_state *ter_state = state->ter_state;
enum stv0367_ter_mode mode;
int constell = 0,/* snr = 0,*/ Data = 0;
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->frequency = stv0367_get_tuner_freq(fe);
if ((int)p->frequency < 0)
p->frequency = -p->frequency;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
constell = stv0367_readbits(state, F367TER_TPS_CONST);
if (constell == 0)
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->modulation = QPSK;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
else if (constell == 1)
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->modulation = QAM_16;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
else
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->modulation = QAM_64;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->inversion = stv0367_readbits(state, F367TER_INV_SPECTR);
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
/* Get the Hierarchical mode */
Data = stv0367_readbits(state, F367TER_TPS_HIERMODE);
switch (Data) {
case 0:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->hierarchy = HIERARCHY_NONE;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;
case 1:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->hierarchy = HIERARCHY_1;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;
case 2:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->hierarchy = HIERARCHY_2;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;
case 3:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->hierarchy = HIERARCHY_4;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;
default:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->hierarchy = HIERARCHY_AUTO;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break; /* error */
}
/* Get the FEC Rate */
if (ter_state->hierarchy == FE_TER_HIER_LOW_PRIO)
Data = stv0367_readbits(state, F367TER_TPS_LPCODE);
else
Data = stv0367_readbits(state, F367TER_TPS_HPCODE);
switch (Data) {
case 0:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->code_rate_HP = FEC_1_2;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;
case 1:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->code_rate_HP = FEC_2_3;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;
case 2:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->code_rate_HP = FEC_3_4;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;
case 3:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->code_rate_HP = FEC_5_6;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;
case 4:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->code_rate_HP = FEC_7_8;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;
default:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->code_rate_HP = FEC_AUTO;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break; /* error */
}
mode = stv0367_readbits(state, F367TER_SYR_MODE);
switch (mode) {
case FE_TER_MODE_2K:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->transmission_mode = TRANSMISSION_MODE_2K;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;
/* case FE_TER_MODE_4K:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->transmission_mode = TRANSMISSION_MODE_4K;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;*/
case FE_TER_MODE_8K:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->transmission_mode = TRANSMISSION_MODE_8K;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;
default:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->transmission_mode = TRANSMISSION_MODE_AUTO;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
}
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->guard_interval = stv0367_readbits(state, F367TER_SYR_GUARD);
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
[media] stv0367: just return 0 instead of using a var Instead of allocating a var to store 0 and just return it, change the code to return 0 directly. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-04 02:10:25 +08:00
return 0;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
}
static int stv0367ter_read_snr(struct dvb_frontend *fe, u16 *snr)
{
struct stv0367_state *state = fe->demodulator_priv;
u32 snru32 = 0;
int cpt = 0;
u8 cut = stv0367_readbits(state, F367TER_IDENTIFICATIONREG);
while (cpt < 10) {
usleep_range(2000, 3000);
if (cut == 0x50) /*cut 1.0 cut 1.1*/
snru32 += stv0367_readbits(state, F367TER_CHCSNR) / 4;
else /*cu2.0*/
snru32 += 125 * stv0367_readbits(state, F367TER_CHCSNR);
cpt++;
}
snru32 /= 10;/*average on 10 values*/
*snr = snru32 / 1000;
return 0;
}
#if 0
static int stv0367ter_status(struct dvb_frontend *fe)
{
struct stv0367_state *state = fe->demodulator_priv;
struct stv0367ter_state *ter_state = state->ter_state;
int locked = FALSE;
locked = (stv0367_readbits(state, F367TER_LK));
if (!locked)
ter_state->unlock_counter += 1;
else
ter_state->unlock_counter = 0;
if (ter_state->unlock_counter > 2) {
if (!stv0367_readbits(state, F367TER_TPS_LOCK) ||
(!stv0367_readbits(state, F367TER_LK))) {
stv0367_writebits(state, F367TER_CORE_ACTIVE, 0);
usleep_range(2000, 3000);
stv0367_writebits(state, F367TER_CORE_ACTIVE, 1);
msleep(350);
locked = (stv0367_readbits(state, F367TER_TPS_LOCK)) &&
(stv0367_readbits(state, F367TER_LK));
}
}
return locked;
}
#endif
[media] dvb: Get rid of typedev usage for enums The DVB API was originally defined using typedefs. This is against Kernel CodingStyle, and there's no good usage here. While we can't remove its usage on userspace, we can avoid its usage in Kernelspace. So, let's do it. This patch was generated by this shell script: for j in $(grep typedef include/uapi/linux/dvb/frontend.h |cut -d' ' -f 3); do for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f); do sed "s,${j}_t,enum $j," <$i >a && mv a $i; done; done While here, make CodingStyle fixes on the affected lines. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> # for drivers/media/firewire/*
2015-06-08 01:53:52 +08:00
static int stv0367ter_read_status(struct dvb_frontend *fe,
enum fe_status *status)
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
{
struct stv0367_state *state = fe->demodulator_priv;
dprintk("%s:\n", __func__);
*status = 0;
if (stv0367_readbits(state, F367TER_LK)) {
*status |= FE_HAS_LOCK;
dprintk("%s: stv0367 has locked\n", __func__);
}
return 0;
}
static int stv0367ter_read_ber(struct dvb_frontend *fe, u32 *ber)
{
struct stv0367_state *state = fe->demodulator_priv;
struct stv0367ter_state *ter_state = state->ter_state;
u32 Errors = 0, tber = 0, temporary = 0;
int abc = 0, def = 0;
/*wait for counting completion*/
if (stv0367_readbits(state, F367TER_SFERRC_OLDVALUE) == 0)
Errors = ((u32)stv0367_readbits(state, F367TER_SFEC_ERR_CNT)
* (1 << 16))
+ ((u32)stv0367_readbits(state, F367TER_SFEC_ERR_CNT_HI)
* (1 << 8))
+ ((u32)stv0367_readbits(state,
F367TER_SFEC_ERR_CNT_LO));
/*measurement not completed, load previous value*/
else {
tber = ter_state->pBER;
return 0;
}
abc = stv0367_readbits(state, F367TER_SFEC_ERR_SOURCE);
def = stv0367_readbits(state, F367TER_SFEC_NUM_EVENT);
if (Errors == 0) {
tber = 0;
} else if (abc == 0x7) {
if (Errors <= 4) {
temporary = (Errors * 1000000000) / (8 * (1 << 14));
temporary = temporary;
} else if (Errors <= 42) {
temporary = (Errors * 100000000) / (8 * (1 << 14));
temporary = temporary * 10;
} else if (Errors <= 429) {
temporary = (Errors * 10000000) / (8 * (1 << 14));
temporary = temporary * 100;
} else if (Errors <= 4294) {
temporary = (Errors * 1000000) / (8 * (1 << 14));
temporary = temporary * 1000;
} else if (Errors <= 42949) {
temporary = (Errors * 100000) / (8 * (1 << 14));
temporary = temporary * 10000;
} else if (Errors <= 429496) {
temporary = (Errors * 10000) / (8 * (1 << 14));
temporary = temporary * 100000;
} else { /*if (Errors<4294967) 2^22 max error*/
temporary = (Errors * 1000) / (8 * (1 << 14));
temporary = temporary * 100000; /* still to *10 */
}
/* Byte error*/
if (def == 2)
/*tber=Errors/(8*(1 <<14));*/
tber = temporary;
else if (def == 3)
/*tber=Errors/(8*(1 <<16));*/
tber = temporary / 4;
else if (def == 4)
/*tber=Errors/(8*(1 <<18));*/
tber = temporary / 16;
else if (def == 5)
/*tber=Errors/(8*(1 <<20));*/
tber = temporary / 64;
else if (def == 6)
/*tber=Errors/(8*(1 <<22));*/
tber = temporary / 256;
else
/* should not pass here*/
tber = 0;
if ((Errors < 4294967) && (Errors > 429496))
tber *= 10;
}
/* save actual value */
ter_state->pBER = tber;
(*ber) = tber;
return 0;
}
#if 0
static u32 stv0367ter_get_per(struct stv0367_state *state)
{
struct stv0367ter_state *ter_state = state->ter_state;
u32 Errors = 0, Per = 0, temporary = 0;
int abc = 0, def = 0, cpt = 0;
while (((stv0367_readbits(state, F367TER_SFERRC_OLDVALUE) == 1) &&
(cpt < 400)) || ((Errors == 0) && (cpt < 400))) {
usleep_range(1000, 2000);
Errors = ((u32)stv0367_readbits(state, F367TER_ERR_CNT1)
* (1 << 16))
+ ((u32)stv0367_readbits(state, F367TER_ERR_CNT1_HI)
* (1 << 8))
+ ((u32)stv0367_readbits(state, F367TER_ERR_CNT1_LO));
cpt++;
}
abc = stv0367_readbits(state, F367TER_ERR_SRC1);
def = stv0367_readbits(state, F367TER_NUM_EVT1);
if (Errors == 0)
Per = 0;
else if (abc == 0x9) {
if (Errors <= 4) {
temporary = (Errors * 1000000000) / (8 * (1 << 8));
temporary = temporary;
} else if (Errors <= 42) {
temporary = (Errors * 100000000) / (8 * (1 << 8));
temporary = temporary * 10;
} else if (Errors <= 429) {
temporary = (Errors * 10000000) / (8 * (1 << 8));
temporary = temporary * 100;
} else if (Errors <= 4294) {
temporary = (Errors * 1000000) / (8 * (1 << 8));
temporary = temporary * 1000;
} else if (Errors <= 42949) {
temporary = (Errors * 100000) / (8 * (1 << 8));
temporary = temporary * 10000;
} else { /*if(Errors<=429496) 2^16 errors max*/
temporary = (Errors * 10000) / (8 * (1 << 8));
temporary = temporary * 100000;
}
/* pkt error*/
if (def == 2)
/*Per=Errors/(1 << 8);*/
Per = temporary;
else if (def == 3)
/*Per=Errors/(1 << 10);*/
Per = temporary / 4;
else if (def == 4)
/*Per=Errors/(1 << 12);*/
Per = temporary / 16;
else if (def == 5)
/*Per=Errors/(1 << 14);*/
Per = temporary / 64;
else if (def == 6)
/*Per=Errors/(1 << 16);*/
Per = temporary / 256;
else
Per = 0;
}
/* save actual value */
ter_state->pPER = Per;
return Per;
}
#endif
static int stv0367_get_tune_settings(struct dvb_frontend *fe,
struct dvb_frontend_tune_settings
*fe_tune_settings)
{
fe_tune_settings->min_delay_ms = 1000;
fe_tune_settings->step_size = 0;
fe_tune_settings->max_drift = 0;
return 0;
}
static void stv0367_release(struct dvb_frontend *fe)
{
struct stv0367_state *state = fe->demodulator_priv;
kfree(state->ter_state);
kfree(state->cab_state);
kfree(state);
}
static struct dvb_frontend_ops stv0367ter_ops = {
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
.delsys = { SYS_DVBT },
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
.info = {
.name = "ST STV0367 DVB-T",
.frequency_min = 47000000,
.frequency_max = 862000000,
.frequency_stepsize = 15625,
.frequency_tolerance = 0,
.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
FE_CAN_FEC_AUTO |
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_QAM_AUTO |
FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER |
FE_CAN_INVERSION_AUTO |
FE_CAN_MUTE_TS
},
.release = stv0367_release,
.init = stv0367ter_init,
.sleep = stv0367ter_sleep,
.i2c_gate_ctrl = stv0367ter_gate_ctrl,
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
.set_frontend = stv0367ter_set_frontend,
.get_frontend = stv0367ter_get_frontend,
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
.get_tune_settings = stv0367_get_tune_settings,
.read_status = stv0367ter_read_status,
.read_ber = stv0367ter_read_ber,/* too slow */
/* .read_signal_strength = stv0367_read_signal_strength,*/
.read_snr = stv0367ter_read_snr,
.read_ucblocks = stv0367ter_read_ucblocks,
};
struct dvb_frontend *stv0367ter_attach(const struct stv0367_config *config,
struct i2c_adapter *i2c)
{
struct stv0367_state *state = NULL;
struct stv0367ter_state *ter_state = NULL;
/* allocate memory for the internal state */
state = kzalloc(sizeof(struct stv0367_state), GFP_KERNEL);
if (state == NULL)
goto error;
ter_state = kzalloc(sizeof(struct stv0367ter_state), GFP_KERNEL);
if (ter_state == NULL)
goto error;
/* setup the state */
state->i2c = i2c;
state->config = config;
state->ter_state = ter_state;
state->fe.ops = stv0367ter_ops;
state->fe.demodulator_priv = state;
state->chip_id = stv0367_readreg(state, 0xf000);
dprintk("%s: chip_id = 0x%x\n", __func__, state->chip_id);
/* check if the demod is there */
if ((state->chip_id != 0x50) && (state->chip_id != 0x60))
goto error;
return &state->fe;
error:
kfree(ter_state);
kfree(state);
return NULL;
}
EXPORT_SYMBOL(stv0367ter_attach);
static int stv0367cab_gate_ctrl(struct dvb_frontend *fe, int enable)
{
struct stv0367_state *state = fe->demodulator_priv;
dprintk("%s:\n", __func__);
stv0367_writebits(state, F367CAB_I2CT_ON, (enable > 0) ? 1 : 0);
return 0;
}
static u32 stv0367cab_get_mclk(struct dvb_frontend *fe, u32 ExtClk_Hz)
{
struct stv0367_state *state = fe->demodulator_priv;
u32 mclk_Hz = 0;/* master clock frequency (Hz) */
u32 M, N, P;
if (stv0367_readbits(state, F367CAB_BYPASS_PLLXN) == 0) {
N = (u32)stv0367_readbits(state, F367CAB_PLL_NDIV);
if (N == 0)
N = N + 1;
M = (u32)stv0367_readbits(state, F367CAB_PLL_MDIV);
if (M == 0)
M = M + 1;
P = (u32)stv0367_readbits(state, F367CAB_PLL_PDIV);
if (P > 5)
P = 5;
mclk_Hz = ((ExtClk_Hz / 2) * N) / (M * (1 << P));
dprintk("stv0367cab_get_mclk BYPASS_PLLXN mclk_Hz=%d\n",
mclk_Hz);
} else
mclk_Hz = ExtClk_Hz;
dprintk("stv0367cab_get_mclk final mclk_Hz=%d\n", mclk_Hz);
return mclk_Hz;
}
static u32 stv0367cab_get_adc_freq(struct dvb_frontend *fe, u32 ExtClk_Hz)
{
u32 ADCClk_Hz = ExtClk_Hz;
ADCClk_Hz = stv0367cab_get_mclk(fe, ExtClk_Hz);
return ADCClk_Hz;
}
[media] stv0367: get rid of warning: no previous prototype drivers/media/dvb-frontends/stv0367.c:1267:25: warning: no previous prototype for 'stv0367ter_lock_algo' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:1531:5: warning: no previous prototype for 'stv0367ter_init' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:2381:21: warning: no previous prototype for 'stv0367cab_SetQamSize' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:2765:5: warning: no previous prototype for 'stv0367cab_init' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:882:4: warning: no previous prototype for 'stv0367_getbits' [-Wmissing-prototypes] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-27 22:26:42 +08:00
static enum stv0367cab_mod stv0367cab_SetQamSize(struct stv0367_state *state,
u32 SymbolRate,
enum stv0367cab_mod QAMSize)
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
{
/* Set QAM size */
stv0367_writebits(state, F367CAB_QAM_MODE, QAMSize);
/* Set Registers settings specific to the QAM size */
switch (QAMSize) {
case FE_CAB_MOD_QAM4:
stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x00);
break;
case FE_CAB_MOD_QAM16:
stv0367_writereg(state, R367CAB_AGC_PWR_REF_L, 0x64);
stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x00);
stv0367_writereg(state, R367CAB_FSM_STATE, 0x90);
stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xc1);
stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa7);
stv0367_writereg(state, R367CAB_EQU_CRL_LD_SEN, 0x95);
stv0367_writereg(state, R367CAB_EQU_CRL_LIMITER, 0x40);
stv0367_writereg(state, R367CAB_EQU_PNT_GAIN, 0x8a);
break;
case FE_CAB_MOD_QAM32:
stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x00);
stv0367_writereg(state, R367CAB_AGC_PWR_REF_L, 0x6e);
stv0367_writereg(state, R367CAB_FSM_STATE, 0xb0);
stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xc1);
stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xb7);
stv0367_writereg(state, R367CAB_EQU_CRL_LD_SEN, 0x9d);
stv0367_writereg(state, R367CAB_EQU_CRL_LIMITER, 0x7f);
stv0367_writereg(state, R367CAB_EQU_PNT_GAIN, 0xa7);
break;
case FE_CAB_MOD_QAM64:
stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x82);
stv0367_writereg(state, R367CAB_AGC_PWR_REF_L, 0x5a);
if (SymbolRate > 45000000) {
stv0367_writereg(state, R367CAB_FSM_STATE, 0xb0);
stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xc1);
stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa5);
} else if (SymbolRate > 25000000) {
stv0367_writereg(state, R367CAB_FSM_STATE, 0xa0);
stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xc1);
stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa6);
} else {
stv0367_writereg(state, R367CAB_FSM_STATE, 0xa0);
stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xd1);
stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa7);
}
stv0367_writereg(state, R367CAB_EQU_CRL_LD_SEN, 0x95);
stv0367_writereg(state, R367CAB_EQU_CRL_LIMITER, 0x40);
stv0367_writereg(state, R367CAB_EQU_PNT_GAIN, 0x99);
break;
case FE_CAB_MOD_QAM128:
stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x00);
stv0367_writereg(state, R367CAB_AGC_PWR_REF_L, 0x76);
stv0367_writereg(state, R367CAB_FSM_STATE, 0x90);
stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xb1);
if (SymbolRate > 45000000)
stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa7);
else if (SymbolRate > 25000000)
stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa6);
else
stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0x97);
stv0367_writereg(state, R367CAB_EQU_CRL_LD_SEN, 0x8e);
stv0367_writereg(state, R367CAB_EQU_CRL_LIMITER, 0x7f);
stv0367_writereg(state, R367CAB_EQU_PNT_GAIN, 0xa7);
break;
case FE_CAB_MOD_QAM256:
stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x94);
stv0367_writereg(state, R367CAB_AGC_PWR_REF_L, 0x5a);
stv0367_writereg(state, R367CAB_FSM_STATE, 0xa0);
if (SymbolRate > 45000000)
stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xc1);
else if (SymbolRate > 25000000)
stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xc1);
else
stv0367_writereg(state, R367CAB_EQU_CTR_LPF_GAIN, 0xd1);
stv0367_writereg(state, R367CAB_EQU_CRL_LPF_GAIN, 0xa7);
stv0367_writereg(state, R367CAB_EQU_CRL_LD_SEN, 0x85);
stv0367_writereg(state, R367CAB_EQU_CRL_LIMITER, 0x40);
stv0367_writereg(state, R367CAB_EQU_PNT_GAIN, 0xa7);
break;
case FE_CAB_MOD_QAM512:
stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x00);
break;
case FE_CAB_MOD_QAM1024:
stv0367_writereg(state, R367CAB_IQDEM_ADJ_AGC_REF, 0x00);
break;
default:
break;
}
return QAMSize;
}
static u32 stv0367cab_set_derot_freq(struct stv0367_state *state,
u32 adc_hz, s32 derot_hz)
{
u32 sampled_if = 0;
u32 adc_khz;
adc_khz = adc_hz / 1000;
dprintk("%s: adc_hz=%d derot_hz=%d\n", __func__, adc_hz, derot_hz);
if (adc_khz != 0) {
if (derot_hz < 1000000)
derot_hz = adc_hz / 4; /* ZIF operation */
if (derot_hz > adc_hz)
derot_hz = derot_hz - adc_hz;
sampled_if = (u32)derot_hz / 1000;
sampled_if *= 32768;
sampled_if /= adc_khz;
sampled_if *= 256;
}
if (sampled_if > 8388607)
sampled_if = 8388607;
dprintk("%s: sampled_if=0x%x\n", __func__, sampled_if);
stv0367_writereg(state, R367CAB_MIX_NCO_LL, sampled_if);
stv0367_writereg(state, R367CAB_MIX_NCO_HL, (sampled_if >> 8));
stv0367_writebits(state, F367CAB_MIX_NCO_INC_HH, (sampled_if >> 16));
return derot_hz;
}
static u32 stv0367cab_get_derot_freq(struct stv0367_state *state, u32 adc_hz)
{
u32 sampled_if;
sampled_if = stv0367_readbits(state, F367CAB_MIX_NCO_INC_LL) +
(stv0367_readbits(state, F367CAB_MIX_NCO_INC_HL) << 8) +
(stv0367_readbits(state, F367CAB_MIX_NCO_INC_HH) << 16);
sampled_if /= 256;
sampled_if *= (adc_hz / 1000);
sampled_if += 1;
sampled_if /= 32768;
return sampled_if;
}
static u32 stv0367cab_set_srate(struct stv0367_state *state, u32 adc_hz,
u32 mclk_hz, u32 SymbolRate,
enum stv0367cab_mod QAMSize)
{
u32 QamSizeCorr = 0;
u32 u32_tmp = 0, u32_tmp1 = 0;
u32 adp_khz;
dprintk("%s:\n", __func__);
/* Set Correction factor of SRC gain */
switch (QAMSize) {
case FE_CAB_MOD_QAM4:
QamSizeCorr = 1110;
break;
case FE_CAB_MOD_QAM16:
QamSizeCorr = 1032;
break;
case FE_CAB_MOD_QAM32:
QamSizeCorr = 954;
break;
case FE_CAB_MOD_QAM64:
QamSizeCorr = 983;
break;
case FE_CAB_MOD_QAM128:
QamSizeCorr = 957;
break;
case FE_CAB_MOD_QAM256:
QamSizeCorr = 948;
break;
case FE_CAB_MOD_QAM512:
QamSizeCorr = 0;
break;
case FE_CAB_MOD_QAM1024:
QamSizeCorr = 944;
break;
default:
break;
}
/* Transfer ratio calculation */
if (adc_hz != 0) {
u32_tmp = 256 * SymbolRate;
u32_tmp = u32_tmp / adc_hz;
}
stv0367_writereg(state, R367CAB_EQU_CRL_TFR, (u8)u32_tmp);
/* Symbol rate and SRC gain calculation */
adp_khz = (mclk_hz >> 1) / 1000;/* TRL works at half the system clock */
if (adp_khz != 0) {
u32_tmp = SymbolRate;
u32_tmp1 = SymbolRate;
if (u32_tmp < 2097152) { /* 2097152 = 2^21 */
/* Symbol rate calculation */
u32_tmp *= 2048; /* 2048 = 2^11 */
u32_tmp = u32_tmp / adp_khz;
u32_tmp = u32_tmp * 16384; /* 16384 = 2^14 */
u32_tmp /= 125 ; /* 125 = 1000/2^3 */
u32_tmp = u32_tmp * 8; /* 8 = 2^3 */
/* SRC Gain Calculation */
u32_tmp1 *= 2048; /* *2*2^10 */
u32_tmp1 /= 439; /* *2/878 */
u32_tmp1 *= 256; /* *2^8 */
u32_tmp1 = u32_tmp1 / adp_khz; /* /(AdpClk in kHz) */
u32_tmp1 *= QamSizeCorr * 9; /* *1000*corr factor */
u32_tmp1 = u32_tmp1 / 10000000;
} else if (u32_tmp < 4194304) { /* 4194304 = 2**22 */
/* Symbol rate calculation */
u32_tmp *= 1024 ; /* 1024 = 2**10 */
u32_tmp = u32_tmp / adp_khz;
u32_tmp = u32_tmp * 16384; /* 16384 = 2**14 */
u32_tmp /= 125 ; /* 125 = 1000/2**3 */
u32_tmp = u32_tmp * 16; /* 16 = 2**4 */
/* SRC Gain Calculation */
u32_tmp1 *= 1024; /* *2*2^9 */
u32_tmp1 /= 439; /* *2/878 */
u32_tmp1 *= 256; /* *2^8 */
u32_tmp1 = u32_tmp1 / adp_khz; /* /(AdpClk in kHz)*/
u32_tmp1 *= QamSizeCorr * 9; /* *1000*corr factor */
u32_tmp1 = u32_tmp1 / 5000000;
} else if (u32_tmp < 8388607) { /* 8388607 = 2**23 */
/* Symbol rate calculation */
u32_tmp *= 512 ; /* 512 = 2**9 */
u32_tmp = u32_tmp / adp_khz;
u32_tmp = u32_tmp * 16384; /* 16384 = 2**14 */
u32_tmp /= 125 ; /* 125 = 1000/2**3 */
u32_tmp = u32_tmp * 32; /* 32 = 2**5 */
/* SRC Gain Calculation */
u32_tmp1 *= 512; /* *2*2^8 */
u32_tmp1 /= 439; /* *2/878 */
u32_tmp1 *= 256; /* *2^8 */
u32_tmp1 = u32_tmp1 / adp_khz; /* /(AdpClk in kHz) */
u32_tmp1 *= QamSizeCorr * 9; /* *1000*corr factor */
u32_tmp1 = u32_tmp1 / 2500000;
} else {
/* Symbol rate calculation */
u32_tmp *= 256 ; /* 256 = 2**8 */
u32_tmp = u32_tmp / adp_khz;
u32_tmp = u32_tmp * 16384; /* 16384 = 2**13 */
u32_tmp /= 125 ; /* 125 = 1000/2**3 */
u32_tmp = u32_tmp * 64; /* 64 = 2**6 */
/* SRC Gain Calculation */
u32_tmp1 *= 256; /* 2*2^7 */
u32_tmp1 /= 439; /* *2/878 */
u32_tmp1 *= 256; /* *2^8 */
u32_tmp1 = u32_tmp1 / adp_khz; /* /(AdpClk in kHz) */
u32_tmp1 *= QamSizeCorr * 9; /* *1000*corr factor */
u32_tmp1 = u32_tmp1 / 1250000;
}
}
#if 0
/* Filters' coefficients are calculated and written
into registers only if the filters are enabled */
if (stv0367_readbits(state, F367CAB_ADJ_EN)) {
stv0367cab_SetIirAdjacentcoefficient(state, mclk_hz,
SymbolRate);
/* AllPass filter must be enabled
when the adjacents filter is used */
stv0367_writebits(state, F367CAB_ALLPASSFILT_EN, 1);
stv0367cab_SetAllPasscoefficient(state, mclk_hz, SymbolRate);
} else
/* AllPass filter must be disabled
when the adjacents filter is not used */
#endif
stv0367_writebits(state, F367CAB_ALLPASSFILT_EN, 0);
stv0367_writereg(state, R367CAB_SRC_NCO_LL, u32_tmp);
stv0367_writereg(state, R367CAB_SRC_NCO_LH, (u32_tmp >> 8));
stv0367_writereg(state, R367CAB_SRC_NCO_HL, (u32_tmp >> 16));
stv0367_writereg(state, R367CAB_SRC_NCO_HH, (u32_tmp >> 24));
stv0367_writereg(state, R367CAB_IQDEM_GAIN_SRC_L, u32_tmp1 & 0x00ff);
stv0367_writebits(state, F367CAB_GAIN_SRC_HI, (u32_tmp1 >> 8) & 0x00ff);
return SymbolRate ;
}
static u32 stv0367cab_GetSymbolRate(struct stv0367_state *state, u32 mclk_hz)
{
u32 regsym;
u32 adp_khz;
regsym = stv0367_readreg(state, R367CAB_SRC_NCO_LL) +
(stv0367_readreg(state, R367CAB_SRC_NCO_LH) << 8) +
(stv0367_readreg(state, R367CAB_SRC_NCO_HL) << 16) +
(stv0367_readreg(state, R367CAB_SRC_NCO_HH) << 24);
adp_khz = (mclk_hz >> 1) / 1000;/* TRL works at half the system clock */
if (regsym < 134217728) { /* 134217728L = 2**27*/
regsym = regsym * 32; /* 32 = 2**5 */
regsym = regsym / 32768; /* 32768L = 2**15 */
regsym = adp_khz * regsym; /* AdpClk in kHz */
regsym = regsym / 128; /* 128 = 2**7 */
regsym *= 125 ; /* 125 = 1000/2**3 */
regsym /= 2048 ; /* 2048 = 2**11 */
} else if (regsym < 268435456) { /* 268435456L = 2**28 */
regsym = regsym * 16; /* 16 = 2**4 */
regsym = regsym / 32768; /* 32768L = 2**15 */
regsym = adp_khz * regsym; /* AdpClk in kHz */
regsym = regsym / 128; /* 128 = 2**7 */
regsym *= 125 ; /* 125 = 1000/2**3*/
regsym /= 1024 ; /* 256 = 2**10*/
} else if (regsym < 536870912) { /* 536870912L = 2**29*/
regsym = regsym * 8; /* 8 = 2**3 */
regsym = regsym / 32768; /* 32768L = 2**15 */
regsym = adp_khz * regsym; /* AdpClk in kHz */
regsym = regsym / 128; /* 128 = 2**7 */
regsym *= 125 ; /* 125 = 1000/2**3 */
regsym /= 512 ; /* 128 = 2**9 */
} else {
regsym = regsym * 4; /* 4 = 2**2 */
regsym = regsym / 32768; /* 32768L = 2**15 */
regsym = adp_khz * regsym; /* AdpClk in kHz */
regsym = regsym / 128; /* 128 = 2**7 */
regsym *= 125 ; /* 125 = 1000/2**3 */
regsym /= 256 ; /* 64 = 2**8 */
}
return regsym;
}
[media] dvb: Get rid of typedev usage for enums The DVB API was originally defined using typedefs. This is against Kernel CodingStyle, and there's no good usage here. While we can't remove its usage on userspace, we can avoid its usage in Kernelspace. So, let's do it. This patch was generated by this shell script: for j in $(grep typedef include/uapi/linux/dvb/frontend.h |cut -d' ' -f 3); do for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f); do sed "s,${j}_t,enum $j," <$i >a && mv a $i; done; done While here, make CodingStyle fixes on the affected lines. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> # for drivers/media/firewire/*
2015-06-08 01:53:52 +08:00
static int stv0367cab_read_status(struct dvb_frontend *fe,
enum fe_status *status)
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
{
struct stv0367_state *state = fe->demodulator_priv;
dprintk("%s:\n", __func__);
*status = 0;
if (stv0367_readbits(state, F367CAB_QAMFEC_LOCK)) {
*status |= FE_HAS_LOCK;
dprintk("%s: stv0367 has locked\n", __func__);
}
return 0;
}
static int stv0367cab_standby(struct dvb_frontend *fe, u8 standby_on)
{
struct stv0367_state *state = fe->demodulator_priv;
dprintk("%s:\n", __func__);
if (standby_on) {
stv0367_writebits(state, F367CAB_BYPASS_PLLXN, 0x03);
stv0367_writebits(state, F367CAB_STDBY_PLLXN, 0x01);
stv0367_writebits(state, F367CAB_STDBY, 1);
stv0367_writebits(state, F367CAB_STDBY_CORE, 1);
stv0367_writebits(state, F367CAB_EN_BUFFER_I, 0);
stv0367_writebits(state, F367CAB_EN_BUFFER_Q, 0);
stv0367_writebits(state, F367CAB_POFFQ, 1);
stv0367_writebits(state, F367CAB_POFFI, 1);
} else {
stv0367_writebits(state, F367CAB_STDBY_PLLXN, 0x00);
stv0367_writebits(state, F367CAB_BYPASS_PLLXN, 0x00);
stv0367_writebits(state, F367CAB_STDBY, 0);
stv0367_writebits(state, F367CAB_STDBY_CORE, 0);
stv0367_writebits(state, F367CAB_EN_BUFFER_I, 1);
stv0367_writebits(state, F367CAB_EN_BUFFER_Q, 1);
stv0367_writebits(state, F367CAB_POFFQ, 0);
stv0367_writebits(state, F367CAB_POFFI, 0);
}
return 0;
}
static int stv0367cab_sleep(struct dvb_frontend *fe)
{
return stv0367cab_standby(fe, 1);
}
[media] stv0367: get rid of warning: no previous prototype drivers/media/dvb-frontends/stv0367.c:1267:25: warning: no previous prototype for 'stv0367ter_lock_algo' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:1531:5: warning: no previous prototype for 'stv0367ter_init' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:2381:21: warning: no previous prototype for 'stv0367cab_SetQamSize' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:2765:5: warning: no previous prototype for 'stv0367cab_init' [-Wmissing-prototypes] drivers/media/dvb-frontends/stv0367.c:882:4: warning: no previous prototype for 'stv0367_getbits' [-Wmissing-prototypes] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-27 22:26:42 +08:00
static int stv0367cab_init(struct dvb_frontend *fe)
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
{
struct stv0367_state *state = fe->demodulator_priv;
struct stv0367cab_state *cab_state = state->cab_state;
int i;
dprintk("%s:\n", __func__);
for (i = 0; i < STV0367CAB_NBREGS; i++)
stv0367_writereg(state, def0367cab[i].addr,
def0367cab[i].value);
switch (state->config->ts_mode) {
case STV0367_DVBCI_CLOCK:
dprintk("Setting TSMode = STV0367_DVBCI_CLOCK\n");
stv0367_writebits(state, F367CAB_OUTFORMAT, 0x03);
break;
case STV0367_SERIAL_PUNCT_CLOCK:
case STV0367_SERIAL_CONT_CLOCK:
stv0367_writebits(state, F367CAB_OUTFORMAT, 0x01);
break;
case STV0367_PARALLEL_PUNCT_CLOCK:
case STV0367_OUTPUTMODE_DEFAULT:
stv0367_writebits(state, F367CAB_OUTFORMAT, 0x00);
break;
}
switch (state->config->clk_pol) {
case STV0367_RISINGEDGE_CLOCK:
stv0367_writebits(state, F367CAB_CLK_POLARITY, 0x00);
break;
case STV0367_FALLINGEDGE_CLOCK:
case STV0367_CLOCKPOLARITY_DEFAULT:
stv0367_writebits(state, F367CAB_CLK_POLARITY, 0x01);
break;
}
stv0367_writebits(state, F367CAB_SYNC_STRIP, 0x00);
stv0367_writebits(state, F367CAB_CT_NBST, 0x01);
stv0367_writebits(state, F367CAB_TS_SWAP, 0x01);
stv0367_writebits(state, F367CAB_FIFO_BYPASS, 0x00);
stv0367_writereg(state, R367CAB_ANACTRL, 0x00);/*PLL enabled and used */
cab_state->mclk = stv0367cab_get_mclk(fe, state->config->xtal);
cab_state->adc_clk = stv0367cab_get_adc_freq(fe, state->config->xtal);
return 0;
}
static
enum stv0367_cab_signal_type stv0367cab_algo(struct stv0367_state *state,
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
struct dtv_frontend_properties *p)
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
{
struct stv0367cab_state *cab_state = state->cab_state;
enum stv0367_cab_signal_type signalType = FE_CAB_NOAGC;
u32 QAMFEC_Lock, QAM_Lock, u32_tmp,
LockTime, TRLTimeOut, AGCTimeOut, CRLSymbols,
CRLTimeOut, EQLTimeOut, DemodTimeOut, FECTimeOut;
u8 TrackAGCAccum;
s32 tmp;
dprintk("%s:\n", __func__);
/* Timeouts calculation */
/* A max lock time of 25 ms is allowed for delayed AGC */
AGCTimeOut = 25;
/* 100000 symbols needed by the TRL as a maximum value */
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
TRLTimeOut = 100000000 / p->symbol_rate;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
/* CRLSymbols is the needed number of symbols to achieve a lock
within [-4%, +4%] of the symbol rate.
CRL timeout is calculated
for a lock within [-search_range, +search_range].
EQL timeout can be changed depending on
the micro-reflections we want to handle.
A characterization must be performed
with these echoes to get new timeout values.
*/
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
switch (p->modulation) {
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
case QAM_16:
CRLSymbols = 150000;
EQLTimeOut = 100;
break;
case QAM_32:
CRLSymbols = 250000;
EQLTimeOut = 100;
break;
case QAM_64:
CRLSymbols = 200000;
EQLTimeOut = 100;
break;
case QAM_128:
CRLSymbols = 250000;
EQLTimeOut = 100;
break;
case QAM_256:
CRLSymbols = 250000;
EQLTimeOut = 100;
break;
default:
CRLSymbols = 200000;
EQLTimeOut = 100;
break;
}
#if 0
if (pIntParams->search_range < 0) {
CRLTimeOut = (25 * CRLSymbols *
(-pIntParams->search_range / 1000)) /
(pIntParams->symbol_rate / 1000);
} else
#endif
CRLTimeOut = (25 * CRLSymbols * (cab_state->search_range / 1000)) /
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
(p->symbol_rate / 1000);
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
CRLTimeOut = (1000 * CRLTimeOut) / p->symbol_rate;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
/* Timeouts below 50ms are coerced */
if (CRLTimeOut < 50)
CRLTimeOut = 50;
/* A maximum of 100 TS packets is needed to get FEC lock even in case
the spectrum inversion needs to be changed.
This is equal to 20 ms in case of the lowest symbol rate of 0.87Msps
*/
FECTimeOut = 20;
DemodTimeOut = AGCTimeOut + TRLTimeOut + CRLTimeOut + EQLTimeOut;
dprintk("%s: DemodTimeOut=%d\n", __func__, DemodTimeOut);
/* Reset the TRL to ensure nothing starts until the
AGC is stable which ensures a better lock time
*/
stv0367_writereg(state, R367CAB_CTRL_1, 0x04);
/* Set AGC accumulation time to minimum and lock threshold to maximum
in order to speed up the AGC lock */
TrackAGCAccum = stv0367_readbits(state, F367CAB_AGC_ACCUMRSTSEL);
stv0367_writebits(state, F367CAB_AGC_ACCUMRSTSEL, 0x0);
/* Modulus Mapper is disabled */
stv0367_writebits(state, F367CAB_MODULUSMAP_EN, 0);
/* Disable the sweep function */
stv0367_writebits(state, F367CAB_SWEEP_EN, 0);
/* The sweep function is never used, Sweep rate must be set to 0 */
/* Set the derotator frequency in Hz */
stv0367cab_set_derot_freq(state, cab_state->adc_clk,
(1000 * (s32)state->config->if_khz + cab_state->derot_offset));
/* Disable the Allpass Filter when the symbol rate is out of range */
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
if ((p->symbol_rate > 10800000) | (p->symbol_rate < 1800000)) {
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
stv0367_writebits(state, F367CAB_ADJ_EN, 0);
stv0367_writebits(state, F367CAB_ALLPASSFILT_EN, 0);
}
#if 0
/* Check if the tuner is locked */
tuner_lock = stv0367cab_tuner_get_status(fe);
if (tuner_lock == 0)
return FE_367CAB_NOTUNER;
#endif
treewide: relase -> release Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-06-28 17:27:31 +08:00
/* Release the TRL to start demodulator acquisition */
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
/* Wait for QAM lock */
LockTime = 0;
stv0367_writereg(state, R367CAB_CTRL_1, 0x00);
do {
QAM_Lock = stv0367_readbits(state, F367CAB_FSM_STATUS);
if ((LockTime >= (DemodTimeOut - EQLTimeOut)) &&
(QAM_Lock == 0x04))
/*
* We don't wait longer, the frequency/phase offset
* must be too big
*/
LockTime = DemodTimeOut;
else if ((LockTime >= (AGCTimeOut + TRLTimeOut)) &&
(QAM_Lock == 0x02))
/*
* We don't wait longer, either there is no signal or
* it is not the right symbol rate or it is an analog
* carrier
*/
{
LockTime = DemodTimeOut;
u32_tmp = stv0367_readbits(state,
F367CAB_AGC_PWR_WORD_LO) +
(stv0367_readbits(state,
F367CAB_AGC_PWR_WORD_ME) << 8) +
(stv0367_readbits(state,
F367CAB_AGC_PWR_WORD_HI) << 16);
if (u32_tmp >= 131072)
u32_tmp = 262144 - u32_tmp;
u32_tmp = u32_tmp / (1 << (11 - stv0367_readbits(state,
F367CAB_AGC_IF_BWSEL)));
if (u32_tmp < stv0367_readbits(state,
F367CAB_AGC_PWRREF_LO) +
256 * stv0367_readbits(state,
F367CAB_AGC_PWRREF_HI) - 10)
QAM_Lock = 0x0f;
} else {
usleep_range(10000, 20000);
LockTime += 10;
}
dprintk("QAM_Lock=0x%x LockTime=%d\n", QAM_Lock, LockTime);
tmp = stv0367_readreg(state, R367CAB_IT_STATUS1);
dprintk("R367CAB_IT_STATUS1=0x%x\n", tmp);
} while (((QAM_Lock != 0x0c) && (QAM_Lock != 0x0b)) &&
(LockTime < DemodTimeOut));
dprintk("QAM_Lock=0x%x\n", QAM_Lock);
tmp = stv0367_readreg(state, R367CAB_IT_STATUS1);
dprintk("R367CAB_IT_STATUS1=0x%x\n", tmp);
tmp = stv0367_readreg(state, R367CAB_IT_STATUS2);
dprintk("R367CAB_IT_STATUS2=0x%x\n", tmp);
tmp = stv0367cab_get_derot_freq(state, cab_state->adc_clk);
dprintk("stv0367cab_get_derot_freq=0x%x\n", tmp);
if ((QAM_Lock == 0x0c) || (QAM_Lock == 0x0b)) {
/* Wait for FEC lock */
LockTime = 0;
do {
usleep_range(5000, 7000);
LockTime += 5;
QAMFEC_Lock = stv0367_readbits(state,
F367CAB_QAMFEC_LOCK);
} while (!QAMFEC_Lock && (LockTime < FECTimeOut));
} else
QAMFEC_Lock = 0;
if (QAMFEC_Lock) {
signalType = FE_CAB_DATAOK;
cab_state->spect_inv = stv0367_readbits(state,
F367CAB_QUAD_INV);
#if 0
/* not clear for me */
if (state->config->if_khz != 0) {
if (state->config->if_khz > cab_state->adc_clk / 1000) {
cab_state->freq_khz =
FE_Cab_TunerGetFrequency(pIntParams->hTuner)
- stv0367cab_get_derot_freq(state, cab_state->adc_clk)
- cab_state->adc_clk / 1000 + state->config->if_khz;
} else {
cab_state->freq_khz =
FE_Cab_TunerGetFrequency(pIntParams->hTuner)
- stv0367cab_get_derot_freq(state, cab_state->adc_clk)
+ state->config->if_khz;
}
} else {
cab_state->freq_khz =
FE_Cab_TunerGetFrequency(pIntParams->hTuner) +
stv0367cab_get_derot_freq(state,
cab_state->adc_clk) -
cab_state->adc_clk / 4000;
}
#endif
cab_state->symbol_rate = stv0367cab_GetSymbolRate(state,
cab_state->mclk);
cab_state->locked = 1;
/* stv0367_setbits(state, F367CAB_AGC_ACCUMRSTSEL,7);*/
} else {
switch (QAM_Lock) {
case 1:
signalType = FE_CAB_NOAGC;
break;
case 2:
signalType = FE_CAB_NOTIMING;
break;
case 3:
signalType = FE_CAB_TIMINGOK;
break;
case 4:
signalType = FE_CAB_NOCARRIER;
break;
case 5:
signalType = FE_CAB_CARRIEROK;
break;
case 7:
signalType = FE_CAB_NOBLIND;
break;
case 8:
signalType = FE_CAB_BLINDOK;
break;
case 10:
signalType = FE_CAB_NODEMOD;
break;
case 11:
signalType = FE_CAB_DEMODOK;
break;
case 12:
signalType = FE_CAB_DEMODOK;
break;
case 13:
signalType = FE_CAB_NODEMOD;
break;
case 14:
signalType = FE_CAB_NOBLIND;
break;
case 15:
signalType = FE_CAB_NOSIGNAL;
break;
default:
break;
}
}
/* Set the AGC control values to tracking values */
stv0367_writebits(state, F367CAB_AGC_ACCUMRSTSEL, TrackAGCAccum);
return signalType;
}
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
static int stv0367cab_set_frontend(struct dvb_frontend *fe)
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
{
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
struct stv0367_state *state = fe->demodulator_priv;
struct stv0367cab_state *cab_state = state->cab_state;
enum stv0367cab_mod QAMSize = 0;
dprintk("%s: freq = %d, srate = %d\n", __func__,
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->frequency, p->symbol_rate);
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
cab_state->derot_offset = 0;
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
switch (p->modulation) {
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
case QAM_16:
QAMSize = FE_CAB_MOD_QAM16;
break;
case QAM_32:
QAMSize = FE_CAB_MOD_QAM32;
break;
case QAM_64:
QAMSize = FE_CAB_MOD_QAM64;
break;
case QAM_128:
QAMSize = FE_CAB_MOD_QAM128;
break;
case QAM_256:
QAMSize = FE_CAB_MOD_QAM256;
break;
default:
break;
}
stv0367cab_init(fe);
/* Tuner Frequency Setting */
if (fe->ops.tuner_ops.set_params) {
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
[media] tuners: remove dvb_frontend_parameters from set_params() This is a big patch, yet trivial: now that all tuners use the DVBv5 way to pass parameters (e. g. via fe->dtv_property_cache), the extra parameter can be removed from set_params() call. After this change, very few DVBv3 specific stuff are left at the tuners. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-24 23:24:33 +08:00
fe->ops.tuner_ops.set_params(fe);
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
}
stv0367cab_SetQamSize(
state,
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->symbol_rate,
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
QAMSize);
stv0367cab_set_srate(state,
cab_state->adc_clk,
cab_state->mclk,
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->symbol_rate,
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
QAMSize);
/* Search algorithm launch, [-1.1*RangeOffset, +1.1*RangeOffset] scan */
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
cab_state->state = stv0367cab_algo(state, p);
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
return 0;
}
[media] dvb: don't require a parameter for get_frontend Just like set_frontend, use the dvb cache properties for get_frontend. This is more consistent, as both functions are now symetric. Also, at the places get_frontend is called, it makes sense to update the cache. Most of this patch were generated by this small perl script: while (<>) { $file .= $_; } if ($file =~ m/\.get_frontend\s*=\s*([\d\w_]+)/) { my $get = $1; $file =~ s/($get)(\s*\([^\,\)]+)\,\s*struct\s+dtv_frontend_properties\s*\*\s*([_\d\w]+)\)\s*\{/\1\2)\n{\n\tstruct dtv_frontend_properties *\3 = &fe->dtv_property_cache;/g; } print $file; Of course, the changes at dvb_frontend.[ch] were made by hand, as well as the changes on a few other places, where get_frontend() is called internally inside the driver. On some places, get_frontend() were just a void function. Those occurrences were removed, as the DVB core handles such cases. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-30 22:30:21 +08:00
static int stv0367cab_get_frontend(struct dvb_frontend *fe)
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
{
[media] dvb: don't require a parameter for get_frontend Just like set_frontend, use the dvb cache properties for get_frontend. This is more consistent, as both functions are now symetric. Also, at the places get_frontend is called, it makes sense to update the cache. Most of this patch were generated by this small perl script: while (<>) { $file .= $_; } if ($file =~ m/\.get_frontend\s*=\s*([\d\w_]+)/) { my $get = $1; $file =~ s/($get)(\s*\([^\,\)]+)\,\s*struct\s+dtv_frontend_properties\s*\*\s*([_\d\w]+)\)\s*\{/\1\2)\n{\n\tstruct dtv_frontend_properties *\3 = &fe->dtv_property_cache;/g; } print $file; Of course, the changes at dvb_frontend.[ch] were made by hand, as well as the changes on a few other places, where get_frontend() is called internally inside the driver. On some places, get_frontend() were just a void function. Those occurrences were removed, as the DVB core handles such cases. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-30 22:30:21 +08:00
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
struct stv0367_state *state = fe->demodulator_priv;
struct stv0367cab_state *cab_state = state->cab_state;
enum stv0367cab_mod QAMSize;
dprintk("%s:\n", __func__);
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->symbol_rate = stv0367cab_GetSymbolRate(state, cab_state->mclk);
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
QAMSize = stv0367_readbits(state, F367CAB_QAM_MODE);
switch (QAMSize) {
case FE_CAB_MOD_QAM16:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->modulation = QAM_16;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;
case FE_CAB_MOD_QAM32:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->modulation = QAM_32;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;
case FE_CAB_MOD_QAM64:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->modulation = QAM_64;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;
case FE_CAB_MOD_QAM128:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->modulation = QAM_128;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;
[media] media: stv0367: fix frontend modulation initialization with FE_CAB_MOD_QAM256 It was using the wrong constant for QAM256 on get_frontend. Signed-off-by: Maks Naumov <maksqwe1@ukr.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-08-16 03:23:20 +08:00
case FE_CAB_MOD_QAM256:
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->modulation = QAM_256;
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
break;
default:
break;
}
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->frequency = stv0367_get_tuner_freq(fe);
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
dprintk("%s: tuner frequency = %d\n", __func__, p->frequency);
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
if (state->config->if_khz == 0) {
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->frequency +=
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
(stv0367cab_get_derot_freq(state, cab_state->adc_clk) -
cab_state->adc_clk / 4000);
return 0;
}
if (state->config->if_khz > cab_state->adc_clk / 1000)
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->frequency += (state->config->if_khz
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
- stv0367cab_get_derot_freq(state, cab_state->adc_clk)
- cab_state->adc_clk / 1000);
else
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
p->frequency += (state->config->if_khz
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
- stv0367cab_get_derot_freq(state, cab_state->adc_clk));
return 0;
}
#if 0
void stv0367cab_GetErrorCount(state, enum stv0367cab_mod QAMSize,
u32 symbol_rate, FE_367qam_Monitor *Monitor_results)
{
stv0367cab_OptimiseNByteAndGetBER(state, QAMSize, symbol_rate, Monitor_results);
stv0367cab_GetPacketsCount(state, Monitor_results);
return;
}
static int stv0367cab_read_ber(struct dvb_frontend *fe, u32 *ber)
{
struct stv0367_state *state = fe->demodulator_priv;
return 0;
}
#endif
static s32 stv0367cab_get_rf_lvl(struct stv0367_state *state)
{
s32 rfLevel = 0;
s32 RfAgcPwm = 0, IfAgcPwm = 0;
u8 i;
stv0367_writebits(state, F367CAB_STDBY_ADCGP, 0x0);
RfAgcPwm =
(stv0367_readbits(state, F367CAB_RF_AGC1_LEVEL_LO) & 0x03) +
(stv0367_readbits(state, F367CAB_RF_AGC1_LEVEL_HI) << 2);
RfAgcPwm = 100 * RfAgcPwm / 1023;
IfAgcPwm =
stv0367_readbits(state, F367CAB_AGC_IF_PWMCMD_LO) +
(stv0367_readbits(state, F367CAB_AGC_IF_PWMCMD_HI) << 8);
if (IfAgcPwm >= 2048)
IfAgcPwm -= 2048;
else
IfAgcPwm += 2048;
IfAgcPwm = 100 * IfAgcPwm / 4095;
/* For DTT75467 on NIM */
if (RfAgcPwm < 90 && IfAgcPwm < 28) {
for (i = 0; i < RF_LOOKUP_TABLE_SIZE; i++) {
if (RfAgcPwm <= stv0367cab_RF_LookUp1[0][i]) {
rfLevel = (-1) * stv0367cab_RF_LookUp1[1][i];
break;
}
}
if (i == RF_LOOKUP_TABLE_SIZE)
rfLevel = -56;
} else { /*if IF AGC>10*/
for (i = 0; i < RF_LOOKUP_TABLE2_SIZE; i++) {
if (IfAgcPwm <= stv0367cab_RF_LookUp2[0][i]) {
rfLevel = (-1) * stv0367cab_RF_LookUp2[1][i];
break;
}
}
if (i == RF_LOOKUP_TABLE2_SIZE)
rfLevel = -72;
}
return rfLevel;
}
static int stv0367cab_read_strength(struct dvb_frontend *fe, u16 *strength)
{
struct stv0367_state *state = fe->demodulator_priv;
s32 signal = stv0367cab_get_rf_lvl(state);
dprintk("%s: signal=%d dBm\n", __func__, signal);
if (signal <= -72)
*strength = 65535;
else
*strength = (22 + signal) * (-1311);
dprintk("%s: strength=%d\n", __func__, (*strength));
return 0;
}
static int stv0367cab_read_snr(struct dvb_frontend *fe, u16 *snr)
{
struct stv0367_state *state = fe->demodulator_priv;
u32 noisepercentage;
enum stv0367cab_mod QAMSize;
u32 regval = 0, temp = 0;
int power, i;
QAMSize = stv0367_readbits(state, F367CAB_QAM_MODE);
switch (QAMSize) {
case FE_CAB_MOD_QAM4:
power = 21904;
break;
case FE_CAB_MOD_QAM16:
power = 20480;
break;
case FE_CAB_MOD_QAM32:
power = 23040;
break;
case FE_CAB_MOD_QAM64:
power = 21504;
break;
case FE_CAB_MOD_QAM128:
power = 23616;
break;
case FE_CAB_MOD_QAM256:
power = 21760;
break;
case FE_CAB_MOD_QAM512:
power = 1;
break;
case FE_CAB_MOD_QAM1024:
power = 21280;
break;
default:
power = 1;
break;
}
for (i = 0; i < 10; i++) {
regval += (stv0367_readbits(state, F367CAB_SNR_LO)
+ 256 * stv0367_readbits(state, F367CAB_SNR_HI));
}
regval /= 10; /*for average over 10 times in for loop above*/
if (regval != 0) {
temp = power
* (1 << (3 + stv0367_readbits(state, F367CAB_SNR_PER)));
temp /= regval;
}
/* table values, not needed to calculate logarithms */
if (temp >= 5012)
noisepercentage = 100;
else if (temp >= 3981)
noisepercentage = 93;
else if (temp >= 3162)
noisepercentage = 86;
else if (temp >= 2512)
noisepercentage = 79;
else if (temp >= 1995)
noisepercentage = 72;
else if (temp >= 1585)
noisepercentage = 65;
else if (temp >= 1259)
noisepercentage = 58;
else if (temp >= 1000)
noisepercentage = 50;
else if (temp >= 794)
noisepercentage = 43;
else if (temp >= 501)
noisepercentage = 36;
else if (temp >= 316)
noisepercentage = 29;
else if (temp >= 200)
noisepercentage = 22;
else if (temp >= 158)
noisepercentage = 14;
else if (temp >= 126)
noisepercentage = 7;
else
noisepercentage = 0;
dprintk("%s: noisepercentage=%d\n", __func__, noisepercentage);
*snr = (noisepercentage * 65535) / 100;
return 0;
}
[media] stv0367: implement uncorrected blocks counter Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-02 20:12:00 +08:00
static int stv0367cab_read_ucblcks(struct dvb_frontend *fe, u32 *ucblocks)
{
struct stv0367_state *state = fe->demodulator_priv;
int corrected, tscount;
*ucblocks = (stv0367_readreg(state, R367CAB_RS_COUNTER_5) << 8)
| stv0367_readreg(state, R367CAB_RS_COUNTER_4);
corrected = (stv0367_readreg(state, R367CAB_RS_COUNTER_3) << 8)
| stv0367_readreg(state, R367CAB_RS_COUNTER_2);
tscount = (stv0367_readreg(state, R367CAB_RS_COUNTER_2) << 8)
| stv0367_readreg(state, R367CAB_RS_COUNTER_1);
dprintk("%s: uncorrected blocks=%d corrected blocks=%d tscount=%d\n",
__func__, *ucblocks, corrected, tscount);
return 0;
};
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
static struct dvb_frontend_ops stv0367cab_ops = {
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
.delsys = { SYS_DVBC_ANNEX_A },
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
.info = {
.name = "ST STV0367 DVB-C",
.frequency_min = 47000000,
.frequency_max = 862000000,
.frequency_stepsize = 62500,
.symbol_rate_min = 870000,
.symbol_rate_max = 11700000,
.caps = 0x400 |/* FE_CAN_QAM_4 */
FE_CAN_QAM_16 | FE_CAN_QAM_32 |
FE_CAN_QAM_64 | FE_CAN_QAM_128 |
FE_CAN_QAM_256 | FE_CAN_FEC_AUTO
},
.release = stv0367_release,
.init = stv0367cab_init,
.sleep = stv0367cab_sleep,
.i2c_gate_ctrl = stv0367cab_gate_ctrl,
[media] stv0367: convert set_fontend to use DVBv5 parameters Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-27 00:03:00 +08:00
.set_frontend = stv0367cab_set_frontend,
.get_frontend = stv0367cab_get_frontend,
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
.read_status = stv0367cab_read_status,
/* .read_ber = stv0367cab_read_ber, */
.read_signal_strength = stv0367cab_read_strength,
.read_snr = stv0367cab_read_snr,
[media] stv0367: implement uncorrected blocks counter Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-02 20:12:00 +08:00
.read_ucblocks = stv0367cab_read_ucblcks,
[media] Support for stv0367 multi-standard demodulator The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-26 04:02:00 +08:00
.get_tune_settings = stv0367_get_tune_settings,
};
struct dvb_frontend *stv0367cab_attach(const struct stv0367_config *config,
struct i2c_adapter *i2c)
{
struct stv0367_state *state = NULL;
struct stv0367cab_state *cab_state = NULL;
/* allocate memory for the internal state */
state = kzalloc(sizeof(struct stv0367_state), GFP_KERNEL);
if (state == NULL)
goto error;
cab_state = kzalloc(sizeof(struct stv0367cab_state), GFP_KERNEL);
if (cab_state == NULL)
goto error;
/* setup the state */
state->i2c = i2c;
state->config = config;
cab_state->search_range = 280000;
state->cab_state = cab_state;
state->fe.ops = stv0367cab_ops;
state->fe.demodulator_priv = state;
state->chip_id = stv0367_readreg(state, 0xf000);
dprintk("%s: chip_id = 0x%x\n", __func__, state->chip_id);
/* check if the demod is there */
if ((state->chip_id != 0x50) && (state->chip_id != 0x60))
goto error;
return &state->fe;
error:
kfree(cab_state);
kfree(state);
return NULL;
}
EXPORT_SYMBOL(stv0367cab_attach);
MODULE_PARM_DESC(debug, "Set debug");
MODULE_PARM_DESC(i2c_debug, "Set i2c debug");
MODULE_AUTHOR("Igor M. Liplianin");
MODULE_DESCRIPTION("ST STV0367 DVB-C/T demodulator driver");
MODULE_LICENSE("GPL");