openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/net/ipv4/ipconfig.c

1800 lines
42 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Automatic Configuration of IP -- use DHCP, BOOTP, RARP, or
* user-supplied information to configure own IP address and routes.
*
* Copyright (C) 1996-1998 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
*
* Derived from network configuration code in fs/nfs/nfsroot.c,
* originally Copyright (C) 1995, 1996 Gero Kuhlmann and me.
*
* BOOTP rewritten to construct and analyse packets itself instead
* of misusing the IP layer. num_bugs_causing_wrong_arp_replies--;
* -- MJ, December 1998
[NET] IPV4: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 22:24:47 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* Fixed ip_auto_config_setup calling at startup in the new "Linker Magic"
* initialization scheme.
* - Arnaldo Carvalho de Melo <acme@conectiva.com.br>, 08/11/1999
*
* DHCP support added. To users this looks like a whole separate
* protocol, but we know it's just a bag on the side of BOOTP.
* -- Chip Salzenberg <chip@valinux.com>, May 2000
*
* Ported DHCP support from 2.2.16 to 2.4.0-test4
* -- Eric Biederman <ebiederman@lnxi.com>, 30 Aug 2000
*
* Merged changes from 2.2.19 into 2.4.3
* -- Eric Biederman <ebiederman@lnxi.com>, 22 April Aug 2001
*
* Multiple Nameservers in /proc/net/pnp
* -- Josef Siemes <jsiemes@web.de>, Aug 2002
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
*
* NTP servers in /proc/net/ipconfig/ntp_servers
* -- Chris Novakovic <chris@chrisn.me.uk>, April 2018
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/jiffies.h>
#include <linux/random.h>
#include <linux/init.h>
#include <linux/utsname.h>
#include <linux/in.h>
#include <linux/if.h>
#include <linux/inet.h>
[INET_SOCK]: Move struct inet_sock & helper functions to net/inet_sock.h To help in reducing the number of include dependencies, several files were touched as they were getting needed headers indirectly for stuff they use. Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had linux/dccp.h include twice. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-27 12:43:12 +08:00
#include <linux/inetdevice.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/skbuff.h>
#include <linux/ip.h>
#include <linux/socket.h>
#include <linux/route.h>
#include <linux/udp.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/major.h>
#include <linux/root_dev.h>
#include <linux/delay.h>
[IPV4]: net/ipv4/ipconfig.c should #include <linux/nfs_fs.h> Every file should #include the header files containing the prototypes of it's global functions. nfs_fs.h contains the prototype of root_nfs_parse_addr(). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-06 09:05:52 +08:00
#include <linux/nfs_fs.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modules These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-15 23:47:34 +08:00
#include <linux/export.h>
[NET]: Make /proc/net per network namespace This patch makes /proc/net per network namespace. It modifies the global variables proc_net and proc_net_stat to be per network namespace. The proc_net file helpers are modified to take a network namespace argument, and all of their callers are fixed to pass &init_net for that argument. This ensures that all of the /proc/net files are only visible and usable in the initial network namespace until the code behind them has been updated to be handle multiple network namespaces. Making /proc/net per namespace is necessary as at least some files in /proc/net depend upon the set of network devices which is per network namespace, and even more files in /proc/net have contents that are relevant to a single network namespace. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 18:01:34 +08:00
#include <net/net_namespace.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <net/arp.h>
net: break include loop netdevice.h, dsa.h, devlink.h There is an include loop between netdevice.h, dsa.h, devlink.h because of NETDEV_ALIGN, making it impossible to use devlink structures in dsa.h. Break this loop by taking dsa.h out of netdevice.h, add a forward declaration of dsa_switch_tree and netdev_set_default_ethtool_ops() function, which is what netdevice.h requires. No longer having dsa.h in netdevice.h means the includes in dsa.h no longer get included. This breaks a few other files which depend on these includes. Add these directly in the affected file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-29 05:45:06 +08:00
#include <net/dsa.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <net/ip.h>
#include <net/ipconfig.h>
[INET_SOCK]: Move struct inet_sock & helper functions to net/inet_sock.h To help in reducing the number of include dependencies, several files were touched as they were getting needed headers indirectly for stuff they use. Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had linux/dccp.h include twice. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-27 12:43:12 +08:00
#include <net/route.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
Replace <asm/uaccess.h> with <linux/uaccess.h> globally This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-25 03:46:01 +08:00
#include <linux/uaccess.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <net/checksum.h>
#include <asm/processor.h>
#if defined(CONFIG_IP_PNP_DHCP)
#define IPCONFIG_DHCP
#endif
#if defined(CONFIG_IP_PNP_BOOTP) || defined(CONFIG_IP_PNP_DHCP)
#define IPCONFIG_BOOTP
#endif
#if defined(CONFIG_IP_PNP_RARP)
#define IPCONFIG_RARP
#endif
#if defined(IPCONFIG_BOOTP) || defined(IPCONFIG_RARP)
#define IPCONFIG_DYNAMIC
#endif
/* Define the friendly delay before and after opening net devices */
ipconfig wait for carrier v3 -> v4: fix return boolean false instead of 0 for ic_is_init_dev Currently the ip auto configuration has a hardcoded delay of 1 second. When (ethernet) link takes longer to come up (e.g. more than 3 seconds), nfs root may not be found. Remove the hardcoded delay, and wait for carrier on at least one network device. Signed-off-by: Micha Nelissen <micha@neli.hopto.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 18:14:06 +08:00
#define CONF_POST_OPEN 10 /* After opening: 10 msecs */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Define the timeout for waiting for a DHCP/BOOTP/RARP reply */
#define CONF_OPEN_RETRIES 2 /* (Re)open devices twice */
#define CONF_SEND_RETRIES 6 /* Send six requests per open */
#define CONF_BASE_TIMEOUT (HZ*2) /* Initial timeout: 2 seconds */
#define CONF_TIMEOUT_RANDOM (HZ) /* Maximum amount of randomization */
#define CONF_TIMEOUT_MULT *7/4 /* Rate of timeout growth */
#define CONF_TIMEOUT_MAX (HZ*30) /* Maximum allowed timeout */
[NET] IPV4: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 22:24:47 +08:00
#define CONF_NAMESERVERS_MAX 3 /* Maximum number of nameservers
- '3' from resolv.h */
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
#define CONF_NTP_SERVERS_MAX 3 /* Maximum number of NTP servers */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
net: replace uses of __constant_{endian} Base versions handle constant folding now. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-01 16:45:17 +08:00
#define NONE cpu_to_be32(INADDR_NONE)
#define ANY cpu_to_be32(INADDR_ANY)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ipconfig: add carrier_timeout kernel parameter commit 3fb72f1e6e61 ("ipconfig wait for carrier") added a "wait for carrier" policy, with a fixed worst case maximum wait of two minutes. Now make the wait for carrier timeout configurable on the kernel commandline and use the 120s as the default. The timeout messages introduced with commit 5e404cd65860 ("ipconfig: add informative timeout messages while waiting for carrier") are done in a fixed interval of 20 seconds, just like they were before (240/12). Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-31 18:14:18 +08:00
/* Wait for carrier timeout default in seconds */
static unsigned int carrier_timeout = 120;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Public IP configuration
*/
/* This is used by platforms which might be able to set the ipconfig
* variables using firmware environment vars. If this is set, it will
* ignore such firmware variables.
*/
int ic_set_manually __initdata = 0; /* IPconfig parameters set manually */
ipv4: remove 0/NULL assignment on static static values are automatically initialized to 0 Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05 03:37:46 +08:00
static int ic_enable __initdata; /* IP config enabled? */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Protocol choice */
int ic_proto_enabled __initdata = 0
#ifdef IPCONFIG_BOOTP
| IC_BOOTP
#endif
#ifdef CONFIG_IP_PNP_DHCP
| IC_USE_DHCP
#endif
#ifdef IPCONFIG_RARP
| IC_RARP
#endif
;
ipv4: remove 0/NULL assignment on static static values are automatically initialized to 0 Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05 03:37:46 +08:00
static int ic_host_name_set __initdata; /* Host name set by us? */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
__be32 ic_myaddr = NONE; /* My IP address */
static __be32 ic_netmask = NONE; /* Netmask for local subnet */
__be32 ic_gateway = NONE; /* Gateway IP address */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ipconfig: Protect ic_addrservaddr with IPCONFIG_DYNAMIC. >> net/ipv4/ipconfig.c:130:15: warning: 'ic_addrservaddr' defined but not used [-Wunused-variable] static __be32 ic_addrservaddr = NONE; /* IP Address of the IP addresses'server */ Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-12 11:40:24 +08:00
#ifdef IPCONFIG_DYNAMIC
net: ipconfig: avoid warning by making ic_addrservaddr static The symbol ic_addrservaddr is not static, but has no declaration to match so make it static to fix the following warning: net/ipv4/ipconfig.c:130:8: warning: symbol 'ic_addrservaddr' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10 19:11:06 +08:00
static __be32 ic_addrservaddr = NONE; /* IP Address of the IP addresses'server */
ipconfig: Protect ic_addrservaddr with IPCONFIG_DYNAMIC. >> net/ipv4/ipconfig.c:130:15: warning: 'ic_addrservaddr' defined but not used [-Wunused-variable] static __be32 ic_addrservaddr = NONE; /* IP Address of the IP addresses'server */ Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-12 11:40:24 +08:00
#endif
net/ipv4/ipconfig: really display the BOOTP/DHCP server's address. Up to now, the debug and info messages from the ipconfig subsytem claim to display the IP address of the DHCP/BOOTP server but display instead the IP address of the bootserver. Fix that. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04 02:02:12 +08:00
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
__be32 ic_servaddr = NONE; /* Boot server IP address */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
__be32 root_server_addr = NONE; /* Address of NFS server */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
u8 root_server_path[256] = { 0, }; /* Path to mount as root */
[IPCONFIG]: Mark vendor_class_identifier as __initdata. Based upon a suggestion by Francois Romieu. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-20 13:56:16 +08:00
/* vendor class identifier */
static char vendor_class_identifier[253] __initdata;
[IPV4] ipconfig: Implement DHCP Class-identifier From : Rainer Jochem <rainer.jochem@mpi-sb.mpg.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 18:18:39 +08:00
ipconfig: send Client-identifier in DHCP requests A dhcp server may provide parameters to a client from a pool of IP addresses and using a shared rootfs, or provide a specific set of parameters for a specific client, usually using the MAC address to identify each client individually. The dhcp protocol also specifies a client-id field which can be used to determine the correct parameters to supply when no MAC address is available. There is currently no way to tell the kernel to supply a specific client-id, only the userspace dhcp clients support this feature, but this can not be used when the network is needed before userspace is available such as when the root filesystem is on NFS. This patch is to be able to do something like "ip=dhcp,client_id_type, client_id_value", as a kernel parameter to enable the kernel to identify itself to the server. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 16:54:36 +08:00
#if defined(CONFIG_IP_PNP_DHCP)
static char dhcp_client_identifier[253] __initdata;
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Persistent data: */
ipv4: ipconfig: avoid unused ic_proto_used symbol When CONFIG_PROC_FS, CONFIG_IP_PNP_BOOTP, CONFIG_IP_PNP_DHCP and CONFIG_IP_PNP_RARP are all disabled, we get a warning about the ic_proto_used variable being unused: net/ipv4/ipconfig.c:146:12: error: 'ic_proto_used' defined but not used [-Werror=unused-variable] This avoids the warning, by making the definition conditional on whether a dynamic IP configuration protocol is configured. If not, we know that the value is always zero, so we can optimize away the variable and all code that depends on it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29 00:39:24 +08:00
#ifdef IPCONFIG_DYNAMIC
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int ic_proto_used; /* Protocol used, if any */
ipv4: ipconfig: avoid unused ic_proto_used symbol When CONFIG_PROC_FS, CONFIG_IP_PNP_BOOTP, CONFIG_IP_PNP_DHCP and CONFIG_IP_PNP_RARP are all disabled, we get a warning about the ic_proto_used variable being unused: net/ipv4/ipconfig.c:146:12: error: 'ic_proto_used' defined but not used [-Werror=unused-variable] This avoids the warning, by making the definition conditional on whether a dynamic IP configuration protocol is configured. If not, we know that the value is always zero, so we can optimize away the variable and all code that depends on it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29 00:39:24 +08:00
#else
#define ic_proto_used 0
#endif
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
static __be32 ic_nameservers[CONF_NAMESERVERS_MAX]; /* DNS Server IP addresses */
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
static __be32 ic_ntp_servers[CONF_NTP_SERVERS_MAX]; /* NTP server IP addresses */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static u8 ic_domain[64]; /* DNS (not NIS) domain name */
/*
* Private state.
*/
/* Name of user-selected boot device */
static char user_dev_name[IFNAMSIZ] __initdata = { 0, };
/* Protocols supported by available interfaces */
ipv4: remove 0/NULL assignment on static static values are automatically initialized to 0 Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05 03:37:46 +08:00
static int ic_proto_have_if __initdata;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ipv4: teach ipconfig about the MTU option in DHCP The DHCP spec allows the server to specify the MTU. This can be useful for netbooting with UDP-based NFS-root on a network using jumbo frames. This patch allows the kernel IP autoconfiguration to handle this option correctly. It would be possible to use initramfs and add a script to set the MTU, but that seems like a complicated solution if no initramfs is otherwise necessary, and would bloat the kernel image more than this code would. This patch was originally submitted to LKML in 2003 by Hans-Peter Jansen. Signed-off-by: Chris Friesen <cfriesen@nortel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-20 06:31:50 +08:00
/* MTU for boot device */
ipv4: remove 0/NULL assignment on static static values are automatically initialized to 0 Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05 03:37:46 +08:00
static int ic_dev_mtu __initdata;
ipv4: teach ipconfig about the MTU option in DHCP The DHCP spec allows the server to specify the MTU. This can be useful for netbooting with UDP-based NFS-root on a network using jumbo frames. This patch allows the kernel IP autoconfiguration to handle this option correctly. It would be possible to use initramfs and add a script to set the MTU, but that seems like a complicated solution if no initramfs is otherwise necessary, and would bloat the kernel image more than this code would. This patch was originally submitted to LKML in 2003 by Hans-Peter Jansen. Signed-off-by: Chris Friesen <cfriesen@nortel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-20 06:31:50 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef IPCONFIG_DYNAMIC
static DEFINE_SPINLOCK(ic_recv_lock);
ipv4: remove 0/NULL assignment on static static values are automatically initialized to 0 Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05 03:37:46 +08:00
static volatile int ic_got_reply __initdata; /* Proto(s) that replied */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
#ifdef IPCONFIG_DHCP
ipv4: remove 0/NULL assignment on static static values are automatically initialized to 0 Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05 03:37:46 +08:00
static int ic_dhcp_msgtype __initdata; /* DHCP msg type received */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
/*
* Network devices
*/
struct ic_device {
struct ic_device *next;
struct net_device *dev;
unsigned short flags;
short able;
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
__be32 xid;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
ipv4: remove 0/NULL assignment on static static values are automatically initialized to 0 Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05 03:37:46 +08:00
static struct ic_device *ic_first_dev __initdata; /* List of open device */
net: ipconfig: Support using "delayed" DHCP replies The dhcp code only waits 1s between sending DHCP requests on different devices and only accepts an answer for the device that sent out the last request. Only the timeout at the end of a loop is increased iteratively which favours only the last device. This makes it impossible to work with a dhcp server that takes little more than 1s connected to a device that is not the last one. Instead of also increasing the inter-device timeout, teach the code to handle delayed replies. To accomplish that, make *ic_dev track the current ic_device instead of the current net_device and adapt all users accordingly. The relevant change then is to reset d to ic_dev on a reply to assert that the followup request goes through the right device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 17:30:38 +08:00
static struct ic_device *ic_dev __initdata; /* Selected device */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ipconfig wait for carrier v3 -> v4: fix return boolean false instead of 0 for ic_is_init_dev Currently the ip auto configuration has a hardcoded delay of 1 second. When (ethernet) link takes longer to come up (e.g. more than 3 seconds), nfs root may not be found. Remove the hardcoded delay, and wait for carrier on at least one network device. Signed-off-by: Micha Nelissen <micha@neli.hopto.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 18:14:06 +08:00
static bool __init ic_is_init_dev(struct net_device *dev)
ipconfig: Handle devices which take some time to come up. Some network devices, particularly USB ones, take several seconds to fully init and appear in the device list. If the user turned ipconfig on, they are using it for NFS root or some other early booting purpose. So it makes no sense to just flat out fail immediately if the device isn't found. It also doesn't make sense to just jack up the initial wait to something crazy like 10 seconds. Instead, poll immediately, and then periodically once a second, waiting for a usable device to appear. Fail after 12 seconds. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Christian Pellegrin <chripell@fsfe.org>
2010-03-12 16:00:17 +08:00
{
ipconfig wait for carrier v3 -> v4: fix return boolean false instead of 0 for ic_is_init_dev Currently the ip auto configuration has a hardcoded delay of 1 second. When (ethernet) link takes longer to come up (e.g. more than 3 seconds), nfs root may not be found. Remove the hardcoded delay, and wait for carrier on at least one network device. Signed-off-by: Micha Nelissen <micha@neli.hopto.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 18:14:06 +08:00
if (dev->flags & IFF_LOOPBACK)
return false;
return user_dev_name[0] ? !strcmp(dev->name, user_dev_name) :
ipconfig: Handle devices which take some time to come up. Some network devices, particularly USB ones, take several seconds to fully init and appear in the device list. If the user turned ipconfig on, they are using it for NFS root or some other early booting purpose. So it makes no sense to just flat out fail immediately if the device isn't found. It also doesn't make sense to just jack up the initial wait to something crazy like 10 seconds. Instead, poll immediately, and then periodically once a second, waiting for a usable device to appear. Fail after 12 seconds. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Christian Pellegrin <chripell@fsfe.org>
2010-03-12 16:00:17 +08:00
(!(dev->flags & IFF_LOOPBACK) &&
(dev->flags & (IFF_POINTOPOINT|IFF_BROADCAST)) &&
ipconfig wait for carrier v3 -> v4: fix return boolean false instead of 0 for ic_is_init_dev Currently the ip auto configuration has a hardcoded delay of 1 second. When (ethernet) link takes longer to come up (e.g. more than 3 seconds), nfs root may not be found. Remove the hardcoded delay, and wait for carrier on at least one network device. Signed-off-by: Micha Nelissen <micha@neli.hopto.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 18:14:06 +08:00
strncmp(dev->name, "dummy", 5));
ipconfig: Handle devices which take some time to come up. Some network devices, particularly USB ones, take several seconds to fully init and appear in the device list. If the user turned ipconfig on, they are using it for NFS root or some other early booting purpose. So it makes no sense to just flat out fail immediately if the device isn't found. It also doesn't make sense to just jack up the initial wait to something crazy like 10 seconds. Instead, poll immediately, and then periodically once a second, waiting for a usable device to appear. Fail after 12 seconds. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Christian Pellegrin <chripell@fsfe.org>
2010-03-12 16:00:17 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int __init ic_open_devs(void)
{
struct ic_device *d, **last;
struct net_device *dev;
unsigned short oflags;
ipconfig: add informative timeout messages while waiting for carrier Commit 3fb72f1e6e6165c5f495e8dc11c5bbd14c73385c ("ipconfig wait for carrier") added a "wait for carrier on at least one interface" policy, with a worst case maximum wait of two minutes. However, if you encounter this, you won't get any feedback from the console as to the nature of what is going on. You just see the booting process hang for two minutes and then continue. Here we add a message so the user knows what is going on, and hence can take action to rectify the situation (e.g. fix network cable or whatever.) After the 1st 10s pause, output now begins that looks like this: Waiting up to 110 more seconds for network. Waiting up to 100 more seconds for network. Waiting up to 90 more seconds for network. Waiting up to 80 more seconds for network. ... Since most systems will have no problem getting link/carrier in the 1st 10s, the only people who will see these messages are people with genuine issues that need to be resolved. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02 21:58:25 +08:00
unsigned long start, next_msg;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
last = &ic_first_dev;
[NET]: Convert RTNL to mutex. This patch turns the RTNL from a semaphore to a new 2.6.16 mutex and gets rid of some of the leftover legacy. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 14:23:58 +08:00
rtnl_lock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
net: ipv4: handle DSA enabled master network devices The logic to configure a network interface for kernel IP auto-configuration is very simplistic, and does not handle the case where a device is stacked onto another such as with DSA. This causes the kernel not to open and configure the master network device in a DSA switch tree, and therefore slave network devices using this master network devices as conduit device cannot be open. This restriction comes from a check in net/dsa/slave.c, which is basically checking the master netdev flags for IFF_UP and returns -ENETDOWN if it is not the case. Automatically bringing-up DSA master network devices allows DSA slave network devices to be used as valid interfaces for e.g: NFS root booting by allowing kernel IP autoconfiguration to succeed on these interfaces. On the reverse path, make sure we do not attempt to close a DSA-enabled device as this would implicitely prevent the slave DSA network device from operating. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-17 01:56:01 +08:00
/* bring loopback and DSA master network devices up first */
[IPV4]: When possible test for IFF_LOOPBACK and not dev == loopback_dev Now that multiple loopback devices are becoming possible it makes the code a little cleaner and more maintainable to test if a deivice is th a loopback device by testing dev->flags & IFF_LOOPBACK instead of dev == loopback_dev. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-27 13:10:06 +08:00
for_each_netdev(&init_net, dev) {
net: ipv4: handle DSA enabled master network devices The logic to configure a network interface for kernel IP auto-configuration is very simplistic, and does not handle the case where a device is stacked onto another such as with DSA. This causes the kernel not to open and configure the master network device in a DSA switch tree, and therefore slave network devices using this master network devices as conduit device cannot be open. This restriction comes from a check in net/dsa/slave.c, which is basically checking the master netdev flags for IFF_UP and returns -ENETDOWN if it is not the case. Automatically bringing-up DSA master network devices allows DSA slave network devices to be used as valid interfaces for e.g: NFS root booting by allowing kernel IP autoconfiguration to succeed on these interfaces. On the reverse path, make sure we do not attempt to close a DSA-enabled device as this would implicitely prevent the slave DSA network device from operating. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-17 01:56:01 +08:00
if (!(dev->flags & IFF_LOOPBACK) && !netdev_uses_dsa(dev))
[IPV4]: When possible test for IFF_LOOPBACK and not dev == loopback_dev Now that multiple loopback devices are becoming possible it makes the code a little cleaner and more maintainable to test if a deivice is th a loopback device by testing dev->flags & IFF_LOOPBACK instead of dev == loopback_dev. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-27 13:10:06 +08:00
continue;
net: core: dev: Add extack argument to dev_change_flags() In order to pass extack together with NETDEV_PRE_UP notifications, it's necessary to route the extack to __dev_open() from diverse (possibly indirect) callers. One prominent API through which the notification is invoked is dev_change_flags(). Therefore extend dev_change_flags() with and extra extack argument and update all users. Most of the calls end up just encoding NULL, but several sites (VLAN, ipvlan, VRF, rtnetlink) do have extack available. Since the function declaration line is changed anyway, name the other function arguments to placate checkpatch. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07 01:05:42 +08:00
if (dev_change_flags(dev, dev->flags | IFF_UP, NULL) < 0)
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_err("IP-Config: Failed to open %s\n", dev->name);
[IPV4]: When possible test for IFF_LOOPBACK and not dev == loopback_dev Now that multiple loopback devices are becoming possible it makes the code a little cleaner and more maintainable to test if a deivice is th a loopback device by testing dev->flags & IFF_LOOPBACK instead of dev == loopback_dev. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-27 13:10:06 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-18 02:56:21 +08:00
for_each_netdev(&init_net, dev) {
ipconfig wait for carrier v3 -> v4: fix return boolean false instead of 0 for ic_is_init_dev Currently the ip auto configuration has a hardcoded delay of 1 second. When (ethernet) link takes longer to come up (e.g. more than 3 seconds), nfs root may not be found. Remove the hardcoded delay, and wait for carrier on at least one network device. Signed-off-by: Micha Nelissen <micha@neli.hopto.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 18:14:06 +08:00
if (ic_is_init_dev(dev)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int able = 0;
if (dev->mtu >= 364)
able |= IC_BOOTP;
else
net ipv4: use preferred log methods Replace printk calls with preferred unconditional log method calls to keep kernel messages clean. Added newline to "too small MTU" message. Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-13 18:40:34 +08:00
pr_warn("DHCP/BOOTP: Ignoring device %s, MTU %d too small\n",
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
dev->name, dev->mtu);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!(dev->flags & IFF_NOARP))
able |= IC_RARP;
able &= ic_proto_enabled;
if (ic_proto_enabled && !able)
continue;
oflags = dev->flags;
net: core: dev: Add extack argument to dev_change_flags() In order to pass extack together with NETDEV_PRE_UP notifications, it's necessary to route the extack to __dev_open() from diverse (possibly indirect) callers. One prominent API through which the notification is invoked is dev_change_flags(). Therefore extend dev_change_flags() with and extra extack argument and update all users. Most of the calls end up just encoding NULL, but several sites (VLAN, ipvlan, VRF, rtnetlink) do have extack available. Since the function declaration line is changed anyway, name the other function arguments to placate checkpatch. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07 01:05:42 +08:00
if (dev_change_flags(dev, oflags | IFF_UP, NULL) < 0) {
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_err("IP-Config: Failed to open %s\n",
dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
continue;
}
if (!(d = kmalloc(sizeof(struct ic_device), GFP_KERNEL))) {
[NET]: Convert RTNL to mutex. This patch turns the RTNL from a semaphore to a new 2.6.16 mutex and gets rid of some of the leftover legacy. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 14:23:58 +08:00
rtnl_unlock();
ipconfig: Handle devices which take some time to come up. Some network devices, particularly USB ones, take several seconds to fully init and appear in the device list. If the user turned ipconfig on, they are using it for NFS root or some other early booting purpose. So it makes no sense to just flat out fail immediately if the device isn't found. It also doesn't make sense to just jack up the initial wait to something crazy like 10 seconds. Instead, poll immediately, and then periodically once a second, waiting for a usable device to appear. Fail after 12 seconds. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Christian Pellegrin <chripell@fsfe.org>
2010-03-12 16:00:17 +08:00
return -ENOMEM;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
d->dev = dev;
*last = d;
last = &d->next;
d->flags = oflags;
d->able = able;
if (able & IC_BOOTP)
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
get_random_bytes(&d->xid, sizeof(__be32));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
else
d->xid = 0;
ic_proto_have_if |= able;
net ipv4: use preferred log methods Replace printk calls with preferred unconditional log method calls to keep kernel messages clean. Added newline to "too small MTU" message. Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-13 18:40:34 +08:00
pr_debug("IP-Config: %s UP (able=%d, xid=%08x)\n",
dev->name, able, d->xid);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
ipconfig wait for carrier v3 -> v4: fix return boolean false instead of 0 for ic_is_init_dev Currently the ip auto configuration has a hardcoded delay of 1 second. When (ethernet) link takes longer to come up (e.g. more than 3 seconds), nfs root may not be found. Remove the hardcoded delay, and wait for carrier on at least one network device. Signed-off-by: Micha Nelissen <micha@neli.hopto.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 18:14:06 +08:00
net: have ipconfig not wait if no dev is available previous commit 3fb72f1e6e6165c5f495e8dc11c5bbd14c73385c makes IP-Config wait for carrier on at least one network device. Before waiting (predefined value 120s), check that at least one device was successfully brought up. Otherwise (e.g. buggy bootloader which does not set the MAC address) there is no point in waiting for carrier. Cc: Micha Nelissen <micha@neli.hopto.org> Cc: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-20 06:58:04 +08:00
/* no point in waiting if we could not bring up at least one device */
if (!ic_first_dev)
goto have_carrier;
ipconfig wait for carrier v3 -> v4: fix return boolean false instead of 0 for ic_is_init_dev Currently the ip auto configuration has a hardcoded delay of 1 second. When (ethernet) link takes longer to come up (e.g. more than 3 seconds), nfs root may not be found. Remove the hardcoded delay, and wait for carrier on at least one network device. Signed-off-by: Micha Nelissen <micha@neli.hopto.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 18:14:06 +08:00
/* wait for a carrier on at least one device */
start = jiffies;
ipconfig: add carrier_timeout kernel parameter commit 3fb72f1e6e61 ("ipconfig wait for carrier") added a "wait for carrier" policy, with a fixed worst case maximum wait of two minutes. Now make the wait for carrier timeout configurable on the kernel commandline and use the 120s as the default. The timeout messages introduced with commit 5e404cd65860 ("ipconfig: add informative timeout messages while waiting for carrier") are done in a fixed interval of 20 seconds, just like they were before (240/12). Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-31 18:14:18 +08:00
next_msg = start + msecs_to_jiffies(20000);
ipconfig: Use time_before The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. A simplified version of the Coccinelle semantic patch making this change is as follows: @change@ expression E1,E2; @@ - jiffies - E1 < E2 + time_before(jiffies, E1+E2) Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-21 01:44:10 +08:00
while (time_before(jiffies, start +
ipconfig: add carrier_timeout kernel parameter commit 3fb72f1e6e61 ("ipconfig wait for carrier") added a "wait for carrier" policy, with a fixed worst case maximum wait of two minutes. Now make the wait for carrier timeout configurable on the kernel commandline and use the 120s as the default. The timeout messages introduced with commit 5e404cd65860 ("ipconfig: add informative timeout messages while waiting for carrier") are done in a fixed interval of 20 seconds, just like they were before (240/12). Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-31 18:14:18 +08:00
msecs_to_jiffies(carrier_timeout * 1000))) {
ipconfig: add informative timeout messages while waiting for carrier Commit 3fb72f1e6e6165c5f495e8dc11c5bbd14c73385c ("ipconfig wait for carrier") added a "wait for carrier on at least one interface" policy, with a worst case maximum wait of two minutes. However, if you encounter this, you won't get any feedback from the console as to the nature of what is going on. You just see the booting process hang for two minutes and then continue. Here we add a message so the user knows what is going on, and hence can take action to rectify the situation (e.g. fix network cable or whatever.) After the 1st 10s pause, output now begins that looks like this: Waiting up to 110 more seconds for network. Waiting up to 100 more seconds for network. Waiting up to 90 more seconds for network. Waiting up to 80 more seconds for network. ... Since most systems will have no problem getting link/carrier in the 1st 10s, the only people who will see these messages are people with genuine issues that need to be resolved. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02 21:58:25 +08:00
int wait, elapsed;
ipconfig wait for carrier v3 -> v4: fix return boolean false instead of 0 for ic_is_init_dev Currently the ip auto configuration has a hardcoded delay of 1 second. When (ethernet) link takes longer to come up (e.g. more than 3 seconds), nfs root may not be found. Remove the hardcoded delay, and wait for carrier on at least one network device. Signed-off-by: Micha Nelissen <micha@neli.hopto.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 18:14:06 +08:00
for_each_netdev(&init_net, dev)
if (ic_is_init_dev(dev) && netif_carrier_ok(dev))
goto have_carrier;
msleep(1);
ipconfig: add informative timeout messages while waiting for carrier Commit 3fb72f1e6e6165c5f495e8dc11c5bbd14c73385c ("ipconfig wait for carrier") added a "wait for carrier on at least one interface" policy, with a worst case maximum wait of two minutes. However, if you encounter this, you won't get any feedback from the console as to the nature of what is going on. You just see the booting process hang for two minutes and then continue. Here we add a message so the user knows what is going on, and hence can take action to rectify the situation (e.g. fix network cable or whatever.) After the 1st 10s pause, output now begins that looks like this: Waiting up to 110 more seconds for network. Waiting up to 100 more seconds for network. Waiting up to 90 more seconds for network. Waiting up to 80 more seconds for network. ... Since most systems will have no problem getting link/carrier in the 1st 10s, the only people who will see these messages are people with genuine issues that need to be resolved. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02 21:58:25 +08:00
ipv4: ipconfig.c: add parentheses in an if statement Even if the 'time_before' macro expand with parentheses, the look is bad. Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-10 23:46:54 +08:00
if (time_before(jiffies, next_msg))
ipconfig: add informative timeout messages while waiting for carrier Commit 3fb72f1e6e6165c5f495e8dc11c5bbd14c73385c ("ipconfig wait for carrier") added a "wait for carrier on at least one interface" policy, with a worst case maximum wait of two minutes. However, if you encounter this, you won't get any feedback from the console as to the nature of what is going on. You just see the booting process hang for two minutes and then continue. Here we add a message so the user knows what is going on, and hence can take action to rectify the situation (e.g. fix network cable or whatever.) After the 1st 10s pause, output now begins that looks like this: Waiting up to 110 more seconds for network. Waiting up to 100 more seconds for network. Waiting up to 90 more seconds for network. Waiting up to 80 more seconds for network. ... Since most systems will have no problem getting link/carrier in the 1st 10s, the only people who will see these messages are people with genuine issues that need to be resolved. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02 21:58:25 +08:00
continue;
elapsed = jiffies_to_msecs(jiffies - start);
ipconfig: add carrier_timeout kernel parameter commit 3fb72f1e6e61 ("ipconfig wait for carrier") added a "wait for carrier" policy, with a fixed worst case maximum wait of two minutes. Now make the wait for carrier timeout configurable on the kernel commandline and use the 120s as the default. The timeout messages introduced with commit 5e404cd65860 ("ipconfig: add informative timeout messages while waiting for carrier") are done in a fixed interval of 20 seconds, just like they were before (240/12). Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-31 18:14:18 +08:00
wait = (carrier_timeout * 1000 - elapsed + 500) / 1000;
ipconfig: add informative timeout messages while waiting for carrier Commit 3fb72f1e6e6165c5f495e8dc11c5bbd14c73385c ("ipconfig wait for carrier") added a "wait for carrier on at least one interface" policy, with a worst case maximum wait of two minutes. However, if you encounter this, you won't get any feedback from the console as to the nature of what is going on. You just see the booting process hang for two minutes and then continue. Here we add a message so the user knows what is going on, and hence can take action to rectify the situation (e.g. fix network cable or whatever.) After the 1st 10s pause, output now begins that looks like this: Waiting up to 110 more seconds for network. Waiting up to 100 more seconds for network. Waiting up to 90 more seconds for network. Waiting up to 80 more seconds for network. ... Since most systems will have no problem getting link/carrier in the 1st 10s, the only people who will see these messages are people with genuine issues that need to be resolved. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02 21:58:25 +08:00
pr_info("Waiting up to %d more seconds for network.\n", wait);
ipconfig: add carrier_timeout kernel parameter commit 3fb72f1e6e61 ("ipconfig wait for carrier") added a "wait for carrier" policy, with a fixed worst case maximum wait of two minutes. Now make the wait for carrier timeout configurable on the kernel commandline and use the 120s as the default. The timeout messages introduced with commit 5e404cd65860 ("ipconfig: add informative timeout messages while waiting for carrier") are done in a fixed interval of 20 seconds, just like they were before (240/12). Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-31 18:14:18 +08:00
next_msg = jiffies + msecs_to_jiffies(20000);
ipconfig wait for carrier v3 -> v4: fix return boolean false instead of 0 for ic_is_init_dev Currently the ip auto configuration has a hardcoded delay of 1 second. When (ethernet) link takes longer to come up (e.g. more than 3 seconds), nfs root may not be found. Remove the hardcoded delay, and wait for carrier on at least one network device. Signed-off-by: Micha Nelissen <micha@neli.hopto.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 18:14:06 +08:00
}
have_carrier:
[NET]: Convert RTNL to mutex. This patch turns the RTNL from a semaphore to a new 2.6.16 mutex and gets rid of some of the leftover legacy. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 14:23:58 +08:00
rtnl_unlock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*last = NULL;
if (!ic_first_dev) {
if (user_dev_name[0])
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_err("IP-Config: Device `%s' not found\n",
user_dev_name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
else
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_err("IP-Config: No network devices available\n");
ipconfig: Handle devices which take some time to come up. Some network devices, particularly USB ones, take several seconds to fully init and appear in the device list. If the user turned ipconfig on, they are using it for NFS root or some other early booting purpose. So it makes no sense to just flat out fail immediately if the device isn't found. It also doesn't make sense to just jack up the initial wait to something crazy like 10 seconds. Instead, poll immediately, and then periodically once a second, waiting for a usable device to appear. Fail after 12 seconds. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Christian Pellegrin <chripell@fsfe.org>
2010-03-12 16:00:17 +08:00
return -ENODEV;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
return 0;
}
static void __init ic_close_devs(void)
{
struct ic_device *d, *next;
struct net_device *dev;
[NET]: Convert RTNL to mutex. This patch turns the RTNL from a semaphore to a new 2.6.16 mutex and gets rid of some of the leftover legacy. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 14:23:58 +08:00
rtnl_lock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
next = ic_first_dev;
while ((d = next)) {
next = d->next;
dev = d->dev;
net: ipconfig: fix ic_close_devs() use-after-free Our chosen ic_dev may be anywhere in our list of ic_devs, and we may free it before attempting to close others. When we compare d->dev and ic_dev->dev, we're potentially dereferencing memory returned to the allocator. This causes KASAN to scream for each subsequent ic_dev we check. As there's a 1-1 mapping between ic_devs and netdevs, we can instead compare d and ic_dev directly, which implicitly handles the !ic_dev case, and avoids the use-after-free. The ic_dev pointer may be stale, but we will not dereference it. Original splat: [ 6.487446] ================================================================== [ 6.494693] BUG: KASAN: use-after-free in ic_close_devs+0xc4/0x154 at addr ffff800367efa708 [ 6.503013] Read of size 8 by task swapper/0/1 [ 6.507452] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc3-00002-gda42158 #8 [ 6.514993] Hardware name: AppliedMicro Mustang/Mustang, BIOS 3.05.05-beta_rc Jan 27 2016 [ 6.523138] Call trace: [ 6.525590] [<ffff200008094778>] dump_backtrace+0x0/0x570 [ 6.530976] [<ffff200008094d08>] show_stack+0x20/0x30 [ 6.536017] [<ffff200008bee928>] dump_stack+0x120/0x188 [ 6.541231] [<ffff20000856d5e4>] kasan_object_err+0x24/0xa0 [ 6.546790] [<ffff20000856d924>] kasan_report_error+0x244/0x738 [ 6.552695] [<ffff20000856dfec>] __asan_report_load8_noabort+0x54/0x80 [ 6.559204] [<ffff20000aae86ac>] ic_close_devs+0xc4/0x154 [ 6.564590] [<ffff20000aaedbac>] ip_auto_config+0x2ed4/0x2f1c [ 6.570321] [<ffff200008084b04>] do_one_initcall+0xcc/0x370 [ 6.575882] [<ffff20000aa31de8>] kernel_init_freeable+0x5f8/0x6c4 [ 6.581959] [<ffff20000a16df00>] kernel_init+0x18/0x190 [ 6.587171] [<ffff200008084710>] ret_from_fork+0x10/0x40 [ 6.592468] Object at ffff800367efa700, in cache kmalloc-128 size: 128 [ 6.598969] Allocated: [ 6.601324] PID = 1 [ 6.603427] save_stack_trace_tsk+0x0/0x418 [ 6.607603] save_stack_trace+0x20/0x30 [ 6.611430] kasan_kmalloc+0xd8/0x188 [ 6.615087] ip_auto_config+0x8c4/0x2f1c [ 6.619002] do_one_initcall+0xcc/0x370 [ 6.622832] kernel_init_freeable+0x5f8/0x6c4 [ 6.627178] kernel_init+0x18/0x190 [ 6.630660] ret_from_fork+0x10/0x40 [ 6.634223] Freed: [ 6.636233] PID = 1 [ 6.638334] save_stack_trace_tsk+0x0/0x418 [ 6.642510] save_stack_trace+0x20/0x30 [ 6.646337] kasan_slab_free+0x88/0x178 [ 6.650167] kfree+0xb8/0x478 [ 6.653131] ic_close_devs+0x130/0x154 [ 6.656875] ip_auto_config+0x2ed4/0x2f1c [ 6.660875] do_one_initcall+0xcc/0x370 [ 6.664705] kernel_init_freeable+0x5f8/0x6c4 [ 6.669051] kernel_init+0x18/0x190 [ 6.672534] ret_from_fork+0x10/0x40 [ 6.676098] Memory state around the buggy address: [ 6.680880] ffff800367efa600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.688078] ffff800367efa680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 6.695276] >ffff800367efa700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 6.702469] ^ [ 6.705952] ffff800367efa780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 6.713149] ffff800367efa800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 6.720343] ================================================================== [ 6.727536] Disabling lock debugging due to kernel taint Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: David S. Miller <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: James Morris <jmorris@namei.org> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 01:00:14 +08:00
if (d != ic_dev && !netdev_uses_dsa(dev)) {
net ipv4: use preferred log methods Replace printk calls with preferred unconditional log method calls to keep kernel messages clean. Added newline to "too small MTU" message. Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-13 18:40:34 +08:00
pr_debug("IP-Config: Downing %s\n", dev->name);
net: core: dev: Add extack argument to dev_change_flags() In order to pass extack together with NETDEV_PRE_UP notifications, it's necessary to route the extack to __dev_open() from diverse (possibly indirect) callers. One prominent API through which the notification is invoked is dev_change_flags(). Therefore extend dev_change_flags() with and extra extack argument and update all users. Most of the calls end up just encoding NULL, but several sites (VLAN, ipvlan, VRF, rtnetlink) do have extack available. Since the function declaration line is changed anyway, name the other function arguments to placate checkpatch. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07 01:05:42 +08:00
dev_change_flags(dev, d->flags, NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
kfree(d);
}
[NET]: Convert RTNL to mutex. This patch turns the RTNL from a semaphore to a new 2.6.16 mutex and gets rid of some of the leftover legacy. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 14:23:58 +08:00
rtnl_unlock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
* Interface to various network functions.
*/
static inline void
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
set_sockaddr(struct sockaddr_in *sin, __be32 addr, __be16 port)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
sin->sin_family = AF_INET;
sin->sin_addr.s_addr = addr;
sin->sin_port = port;
}
/*
* Set up interface addresses and routes.
*/
static int __init ic_setup_if(void)
{
struct ifreq ir;
struct sockaddr_in *sin = (void *) &ir.ifr_ifru.ifru_addr;
int err;
memset(&ir, 0, sizeof(ir));
net: ipconfig: Support using "delayed" DHCP replies The dhcp code only waits 1s between sending DHCP requests on different devices and only accepts an answer for the device that sent out the last request. Only the timeout at the end of a loop is increased iteratively which favours only the last device. This makes it impossible to work with a dhcp server that takes little more than 1s connected to a device that is not the last one. Instead of also increasing the inter-device timeout, teach the code to handle delayed replies. To accomplish that, make *ic_dev track the current ic_device instead of the current net_device and adapt all users accordingly. The relevant change then is to reset d to ic_dev on a reply to assert that the followup request goes through the right device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 17:30:38 +08:00
strcpy(ir.ifr_ifrn.ifrn_name, ic_dev->dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
set_sockaddr(sin, ic_myaddr, 0);
devinet_ioctl(): take copyin/copyout to caller Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-01 19:53:12 +08:00
if ((err = devinet_ioctl(&init_net, SIOCSIFADDR, &ir)) < 0) {
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_err("IP-Config: Unable to set interface address (%d)\n",
err);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -1;
}
set_sockaddr(sin, ic_netmask, 0);
devinet_ioctl(): take copyin/copyout to caller Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-01 19:53:12 +08:00
if ((err = devinet_ioctl(&init_net, SIOCSIFNETMASK, &ir)) < 0) {
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_err("IP-Config: Unable to set interface netmask (%d)\n",
err);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -1;
}
set_sockaddr(sin, ic_myaddr | ~ic_netmask, 0);
devinet_ioctl(): take copyin/copyout to caller Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-01 19:53:12 +08:00
if ((err = devinet_ioctl(&init_net, SIOCSIFBRDADDR, &ir)) < 0) {
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_err("IP-Config: Unable to set interface broadcast address (%d)\n",
err);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -1;
}
ipv4: teach ipconfig about the MTU option in DHCP The DHCP spec allows the server to specify the MTU. This can be useful for netbooting with UDP-based NFS-root on a network using jumbo frames. This patch allows the kernel IP autoconfiguration to handle this option correctly. It would be possible to use initramfs and add a script to set the MTU, but that seems like a complicated solution if no initramfs is otherwise necessary, and would bloat the kernel image more than this code would. This patch was originally submitted to LKML in 2003 by Hans-Peter Jansen. Signed-off-by: Chris Friesen <cfriesen@nortel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-20 06:31:50 +08:00
/* Handle the case where we need non-standard MTU on the boot link (a network
* using jumbo frames, for instance). If we can't set the mtu, don't error
* out, we'll try to muddle along.
*/
if (ic_dev_mtu != 0) {
ipconfig: use dev_set_mtu() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-10-02 08:27:01 +08:00
rtnl_lock();
if ((err = dev_set_mtu(ic_dev->dev, ic_dev_mtu)) < 0)
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_err("IP-Config: Unable to set interface mtu to %d (%d)\n",
ic_dev_mtu, err);
ipconfig: use dev_set_mtu() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-10-02 08:27:01 +08:00
rtnl_unlock();
ipv4: teach ipconfig about the MTU option in DHCP The DHCP spec allows the server to specify the MTU. This can be useful for netbooting with UDP-based NFS-root on a network using jumbo frames. This patch allows the kernel IP autoconfiguration to handle this option correctly. It would be possible to use initramfs and add a script to set the MTU, but that seems like a complicated solution if no initramfs is otherwise necessary, and would bloat the kernel image more than this code would. This patch was originally submitted to LKML in 2003 by Hans-Peter Jansen. Signed-off-by: Chris Friesen <cfriesen@nortel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-20 06:31:50 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
}
static int __init ic_setup_routes(void)
{
/* No need to setup device routes, only the default route... */
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
if (ic_gateway != NONE) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct rtentry rm;
int err;
memset(&rm, 0, sizeof(rm));
if ((ic_gateway ^ ic_myaddr) & ic_netmask) {
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_err("IP-Config: Gateway not on directly connected network\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -1;
}
set_sockaddr((struct sockaddr_in *) &rm.rt_dst, 0, 0);
set_sockaddr((struct sockaddr_in *) &rm.rt_genmask, 0, 0);
set_sockaddr((struct sockaddr_in *) &rm.rt_gateway, ic_gateway, 0);
rm.rt_flags = RTF_UP | RTF_GATEWAY;
ip_rt_ioctl(): take copyin to caller Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-01 20:03:10 +08:00
if ((err = ip_rt_ioctl(&init_net, SIOCADDRT, &rm)) < 0) {
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_err("IP-Config: Cannot add default route (%d)\n",
err);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -1;
}
}
return 0;
}
/*
* Fill in default values for all missing parameters.
*/
static int __init ic_defaults(void)
{
/*
* At this point we have no userspace running so need not
* claim locks on system_utsname
*/
[NET] IPV4: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 22:24:47 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!ic_host_name_set)
net: replace NIPQUAD() in net/ipv4/ net/ipv6/ Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31 15:53:57 +08:00
sprintf(init_utsname()->nodename, "%pI4", &ic_myaddr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
if (root_server_addr == NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
root_server_addr = ic_servaddr;
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
if (ic_netmask == NONE) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (IN_CLASSA(ntohl(ic_myaddr)))
ic_netmask = htonl(IN_CLASSA_NET);
else if (IN_CLASSB(ntohl(ic_myaddr)))
ic_netmask = htonl(IN_CLASSB_NET);
else if (IN_CLASSC(ntohl(ic_myaddr)))
ic_netmask = htonl(IN_CLASSC_NET);
net: Allow class-e address assignment via ifconfig ioctl While most distributions long ago switched to the iproute2 suite of utilities, which allow class-e (240.0.0.0/4) address assignment, distributions relying on busybox, toybox and other forms of ifconfig cannot assign class-e addresses without this kernel patch. While CIDR has been obsolete for 2 decades, and a survey of all the open source code in the world shows the IN_whatever macros are also obsolete... rather than obsolete CIDR from this ioctl entirely, this patch merely enables class-e assignment, sanely. Signed-off-by: Dave Taht <dave.taht@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12 07:30:34 +08:00
else if (IN_CLASSE(ntohl(ic_myaddr)))
ic_netmask = htonl(IN_CLASSE_NET);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
else {
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_err("IP-Config: Unable to guess netmask for address %pI4\n",
&ic_myaddr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -1;
}
net ipv4: use preferred log methods Replace printk calls with preferred unconditional log method calls to keep kernel messages clean. Added newline to "too small MTU" message. Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-13 18:40:34 +08:00
pr_notice("IP-Config: Guessing netmask %pI4\n",
&ic_netmask);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
return 0;
}
/*
* RARP support.
*/
#ifdef IPCONFIG_RARP
[NET]: Kill skb->real_dev Bonding just wants the device before the skb_bond() decapsulation occurs, so simply pass that original device into packet_type->func() as an argument. It remains to be seen whether we can use this same exact thing to get rid of skb->input_dev as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-10 10:34:12 +08:00
static int ic_rarp_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static struct packet_type rarp_packet_type __initdata = {
net: replace uses of __constant_{endian} Base versions handle constant folding now. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-01 16:45:17 +08:00
.type = cpu_to_be16(ETH_P_RARP),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.func = ic_rarp_recv,
};
ipv4: annotate a few functions __init in ipconfig.c A few functions are only used from __init context. So annotate these with __init for consistency and silence the following warnings: WARNING: net/ipv4/built-in.o(.text+0x2a876): Section mismatch in reference from the function ic_bootp_init() to the variable .init.data:bootp_packet_type WARNING: net/ipv4/built-in.o(.text+0x2a907): Section mismatch in reference from the function ic_bootp_cleanup() to the variable .init.data:bootp_packet_type Note: The warnings only appear with CONFIG_DEBUG_SECTION_MISMATCH=y Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-30 11:58:15 +08:00
static inline void __init ic_rarp_init(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
dev_add_pack(&rarp_packet_type);
}
ipv4: annotate a few functions __init in ipconfig.c A few functions are only used from __init context. So annotate these with __init for consistency and silence the following warnings: WARNING: net/ipv4/built-in.o(.text+0x2a876): Section mismatch in reference from the function ic_bootp_init() to the variable .init.data:bootp_packet_type WARNING: net/ipv4/built-in.o(.text+0x2a907): Section mismatch in reference from the function ic_bootp_cleanup() to the variable .init.data:bootp_packet_type Note: The warnings only appear with CONFIG_DEBUG_SECTION_MISMATCH=y Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-30 11:58:15 +08:00
static inline void __init ic_rarp_cleanup(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
dev_remove_pack(&rarp_packet_type);
}
/*
* Process received RARP packet.
*/
static int __init
[NET]: Kill skb->real_dev Bonding just wants the device before the skb_bond() decapsulation occurs, so simply pass that original device into packet_type->func() as an argument. It remains to be seen whether we can use this same exact thing to get rid of skb->input_dev as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-10 10:34:12 +08:00
ic_rarp_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct arphdr *rarp;
unsigned char *rarp_ptr;
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
__be32 sip, tip;
ipv4: remove set but unused variable sha unsigned char *sha (source) was already in original git version but was never used. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28 02:03:22 +08:00
unsigned char *tha; /* t for "target" */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct ic_device *d;
netns: Use net_eq() to compare net-namespaces for optimization. Without CONFIG_NET_NS, namespace is always &init_net. Compiler will be able to omit namespace comparisons with this patch. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-20 13:34:43 +08:00
if (!net_eq(dev_net(dev), &init_net))
[NET]: Make packet reception network namespace safe This patch modifies every packet receive function registered with dev_add_pack() to drop packets if they are not from the initial network namespace. This should ensure that the various network stacks do not receive packets in a anything but the initial network namespace until the code has been converted and is ready for them. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-18 02:53:39 +08:00
goto drop;
ipv4: coding style: comparison for equality with NULL The ipv4 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-03 16:17:26 +08:00
skb = skb_share_check(skb, GFP_ATOMIC);
if (!skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return NET_RX_DROP;
if (!pskb_may_pull(skb, sizeof(struct arphdr)))
goto drop;
/* Basic sanity checks can be done without the lock. */
[SK_BUFF]: Introduce skb_transport_header(skb) For the places where we need a pointer to the transport header, it is still legal to touch skb->h.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 09:04:18 +08:00
rarp = (struct arphdr *)skb_transport_header(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* If this test doesn't pass, it's not IP, or we should
* ignore it anyway.
*/
if (rarp->ar_hln != dev->addr_len || dev->type != ntohs(rarp->ar_hrd))
goto drop;
/* If it's not a RARP reply, delete it. */
if (rarp->ar_op != htons(ARPOP_RREPLY))
goto drop;
/* If it's not Ethernet, delete it. */
if (rarp->ar_pro != htons(ETH_P_IP))
goto drop;
[ARP]: Introduce the arp_hdr_len helper. There are some place, that calculate the ARP header length. These calculations are correct, but a) some operate with "magic" constants, b) enlarge the code length (sometimes at the cost of coding style), c) are not informative from the first glance. The proposal is to introduce a helper, that includes all the good sides of these calculations. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04 04:20:57 +08:00
if (!pskb_may_pull(skb, arp_hdr_len(dev)))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto drop;
/* OK, it is all there and looks valid, process... */
[SK_BUFF]: Introduce skb_transport_header(skb) For the places where we need a pointer to the transport header, it is still legal to touch skb->h.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 09:04:18 +08:00
rarp = (struct arphdr *)skb_transport_header(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
rarp_ptr = (unsigned char *) (rarp + 1);
/* One reply at a time, please. */
spin_lock(&ic_recv_lock);
/* If we already have a reply, just drop the packet */
if (ic_got_reply)
goto drop_unlock;
/* Find the ic_device that the packet arrived on */
d = ic_first_dev;
while (d && d->dev != dev)
d = d->next;
if (!d)
goto drop_unlock; /* should never happen */
/* Extract variable-width fields */
rarp_ptr += dev->addr_len;
memcpy(&sip, rarp_ptr, 4);
rarp_ptr += 4;
tha = rarp_ptr;
rarp_ptr += dev->addr_len;
memcpy(&tip, rarp_ptr, 4);
/* Discard packets which are not meant for us. */
if (memcmp(tha, dev->dev_addr, dev->addr_len))
goto drop_unlock;
/* Discard packets which are not from specified server. */
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
if (ic_servaddr != NONE && ic_servaddr != sip)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto drop_unlock;
/* We have a winner! */
net: ipconfig: Support using "delayed" DHCP replies The dhcp code only waits 1s between sending DHCP requests on different devices and only accepts an answer for the device that sent out the last request. Only the timeout at the end of a loop is increased iteratively which favours only the last device. This makes it impossible to work with a dhcp server that takes little more than 1s connected to a device that is not the last one. Instead of also increasing the inter-device timeout, teach the code to handle delayed replies. To accomplish that, make *ic_dev track the current ic_device instead of the current net_device and adapt all users accordingly. The relevant change then is to reset d to ic_dev on a reply to assert that the followup request goes through the right device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 17:30:38 +08:00
ic_dev = d;
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
if (ic_myaddr == NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ic_myaddr = tip;
ic_servaddr = sip;
net/ipv4/ipconfig: really display the BOOTP/DHCP server's address. Up to now, the debug and info messages from the ipconfig subsytem claim to display the IP address of the DHCP/BOOTP server but display instead the IP address of the bootserver. Fix that. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04 02:02:12 +08:00
ic_addrservaddr = sip;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ic_got_reply = IC_RARP;
drop_unlock:
/* Show's over. Nothing to see here. */
spin_unlock(&ic_recv_lock);
drop:
/* Throw the packet out. */
kfree_skb(skb);
return 0;
}
/*
* Send RARP request packet over a single interface.
*/
static void __init ic_rarp_send_if(struct ic_device *d)
{
struct net_device *dev = d->dev;
arp_send(ARPOP_RREQUEST, ETH_P_RARP, 0, dev, 0, NULL,
dev->dev_addr, dev->dev_addr);
}
#endif
ipconfig: fix trivial build error The commit 5e953778a2aab04929a5e7b69f53dc26e39b079e ("ipconfig: add nameserver IPs to kernel-parameter ip=") introduces ic_nameservers_predef() that defined only for BOOTP. However it is used by ip_auto_config_setup() as well. This patch moves it outside of #ifdef BOOTP. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Christoph Fritz <chf.fritz@googlemail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-25 06:09:58 +08:00
/*
* Predefine Nameservers
*/
static inline void __init ic_nameservers_predef(void)
{
int i;
for (i = 0; i < CONF_NAMESERVERS_MAX; i++)
ic_nameservers[i] = NONE;
}
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
/* Predefine NTP servers */
static inline void __init ic_ntp_servers_predef(void)
{
int i;
for (i = 0; i < CONF_NTP_SERVERS_MAX; i++)
ic_ntp_servers[i] = NONE;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* DHCP/BOOTP support.
*/
#ifdef IPCONFIG_BOOTP
struct bootp_pkt { /* BOOTP packet format */
struct iphdr iph; /* IP header */
struct udphdr udph; /* UDP header */
u8 op; /* 1=request, 2=reply */
u8 htype; /* HW address type */
u8 hlen; /* HW address length */
u8 hops; /* Used only by gateways */
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
__be32 xid; /* Transaction ID */
__be16 secs; /* Seconds since we started */
__be16 flags; /* Just what it says */
__be32 client_ip; /* Client's IP address if known */
__be32 your_ip; /* Assigned IP address */
__be32 server_ip; /* (Next, e.g. NFS) Server's IP address */
__be32 relay_ip; /* IP address of BOOTP relay */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
u8 hw_addr[16]; /* Client's HW address */
u8 serv_name[64]; /* Server host name */
u8 boot_file[128]; /* Name of boot file */
u8 exten[312]; /* DHCP options / BOOTP vendor extensions */
};
/* packet ops */
#define BOOTP_REQUEST 1
#define BOOTP_REPLY 2
/* DHCP message types */
#define DHCPDISCOVER 1
#define DHCPOFFER 2
#define DHCPREQUEST 3
#define DHCPDECLINE 4
#define DHCPACK 5
#define DHCPNAK 6
#define DHCPRELEASE 7
#define DHCPINFORM 8
[NET]: Kill skb->real_dev Bonding just wants the device before the skb_bond() decapsulation occurs, so simply pass that original device into packet_type->func() as an argument. It remains to be seen whether we can use this same exact thing to get rid of skb->input_dev as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-10 10:34:12 +08:00
static int ic_bootp_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static struct packet_type bootp_packet_type __initdata = {
net: replace uses of __constant_{endian} Base versions handle constant folding now. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-01 16:45:17 +08:00
.type = cpu_to_be16(ETH_P_IP),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.func = ic_bootp_recv,
};
/*
* Initialize DHCP/BOOTP extension fields in the request.
*/
static const u8 ic_bootp_cookie[4] = { 99, 130, 83, 99 };
#ifdef IPCONFIG_DHCP
static void __init
net: ipconfig: Add device name to debug messages This simplifies understanding what happens when there is more than one device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 17:30:37 +08:00
ic_dhcp_init_options(u8 *options, struct ic_device *d)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
u8 mt = ((ic_servaddr == NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
? DHCPDISCOVER : DHCPREQUEST);
u8 *e = options;
[IPV4] ipconfig: Implement DHCP Class-identifier From : Rainer Jochem <rainer.jochem@mpi-sb.mpg.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 18:18:39 +08:00
int len;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
net: ipconfig: Add device name to debug messages This simplifies understanding what happens when there is more than one device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 17:30:37 +08:00
pr_debug("DHCP: Sending message type %d (%s)\n", mt, d->dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
memcpy(e, ic_bootp_cookie, 4); /* RFC1048 Magic Cookie */
e += 4;
*e++ = 53; /* DHCP message type */
*e++ = 1;
*e++ = mt;
if (mt == DHCPREQUEST) {
*e++ = 54; /* Server ID (IP address) */
*e++ = 4;
memcpy(e, &ic_servaddr, 4);
e += 4;
*e++ = 50; /* Requested IP address */
*e++ = 4;
memcpy(e, &ic_myaddr, 4);
e += 4;
}
/* always? */
{
static const u8 ic_req_params[] = {
1, /* Subnet mask */
3, /* Default gateway */
6, /* DNS server */
12, /* Host name */
15, /* Domain name */
17, /* Boot path */
ipv4: teach ipconfig about the MTU option in DHCP The DHCP spec allows the server to specify the MTU. This can be useful for netbooting with UDP-based NFS-root on a network using jumbo frames. This patch allows the kernel IP autoconfiguration to handle this option correctly. It would be possible to use initramfs and add a script to set the MTU, but that seems like a complicated solution if no initramfs is otherwise necessary, and would bloat the kernel image more than this code would. This patch was originally submitted to LKML in 2003 by Hans-Peter Jansen. Signed-off-by: Chris Friesen <cfriesen@nortel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-20 06:31:50 +08:00
26, /* MTU */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
40, /* NIS domain name */
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
42, /* NTP servers */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
*e++ = 55; /* Parameter request list */
*e++ = sizeof(ic_req_params);
memcpy(e, ic_req_params, sizeof(ic_req_params));
e += sizeof(ic_req_params);
[IPV4] ipconfig: Implement DHCP Class-identifier From : Rainer Jochem <rainer.jochem@mpi-sb.mpg.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 18:18:39 +08:00
ipconfig: send host-name in DHCP requests Normally dhclient can be configured to send the "host-name" option in DHCP requests to update the client's DNS record. However for an NFSROOT system, dhclient shall never be called (which may change the IP addr and therefore lose your root NFS mount connection). So enable updating the DNS record with kernel parameter ip=::::$HOST_NAME::dhcp Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-31 01:19:53 +08:00
if (ic_host_name_set) {
*e++ = 12; /* host-name */
len = strlen(utsname()->nodename);
*e++ = len;
memcpy(e, utsname()->nodename, len);
e += len;
}
[IPV4] ipconfig: Implement DHCP Class-identifier From : Rainer Jochem <rainer.jochem@mpi-sb.mpg.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 18:18:39 +08:00
if (*vendor_class_identifier) {
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_info("DHCP: sending class identifier \"%s\"\n",
vendor_class_identifier);
[IPV4] ipconfig: Implement DHCP Class-identifier From : Rainer Jochem <rainer.jochem@mpi-sb.mpg.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 18:18:39 +08:00
*e++ = 60; /* Class-identifier */
len = strlen(vendor_class_identifier);
*e++ = len;
memcpy(e, vendor_class_identifier, len);
e += len;
}
ipconfig: send Client-identifier in DHCP requests A dhcp server may provide parameters to a client from a pool of IP addresses and using a shared rootfs, or provide a specific set of parameters for a specific client, usually using the MAC address to identify each client individually. The dhcp protocol also specifies a client-id field which can be used to determine the correct parameters to supply when no MAC address is available. There is currently no way to tell the kernel to supply a specific client-id, only the userspace dhcp clients support this feature, but this can not be used when the network is needed before userspace is available such as when the root filesystem is on NFS. This patch is to be able to do something like "ip=dhcp,client_id_type, client_id_value", as a kernel parameter to enable the kernel to identify itself to the server. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 16:54:36 +08:00
len = strlen(dhcp_client_identifier + 1);
/* the minimum length of identifier is 2, include 1 byte type,
* and can not be larger than the length of options
*/
if (len >= 1 && len < 312 - (e - options) - 1) {
*e++ = 61;
*e++ = len + 1;
memcpy(e, dhcp_client_identifier, len + 1);
e += len + 1;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
*e++ = 255; /* End of the list */
}
#endif /* IPCONFIG_DHCP */
static void __init ic_bootp_init_ext(u8 *e)
{
memcpy(e, ic_bootp_cookie, 4); /* RFC1048 Magic Cookie */
e += 4;
*e++ = 1; /* Subnet mask request */
*e++ = 4;
e += 4;
*e++ = 3; /* Default gateway request */
*e++ = 4;
e += 4;
ipconfig: BOOTP: Request CONF_NAMESERVERS_MAX name servers When ipconfig is autoconfigured via BOOTP, the request packet initialised by ic_bootp_init_ext() always allocates 8 bytes for the name server option, limiting the BOOTP server to responding with at most 2 name servers even though ipconfig in fact supports an arbitrary number of name servers (as defined by CONF_NAMESERVERS_MAX, which is currently 3). Only request name servers in the request packet if CONF_NAMESERVERS_MAX is positive (to comply with [1, §3.8]), and allocate enough space in the packet for CONF_NAMESERVERS_MAX name servers to indicate the maximum number we can accept in response. [1] RFC 2132, "DHCP Options and BOOTP Vendor Extensions": https://tools.ietf.org/rfc/rfc2132.txt Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:35 +08:00
#if CONF_NAMESERVERS_MAX > 0
ipconfig: BOOTP: Don't request IEN-116 name servers When ipconfig is autoconfigured via BOOTP, the request packet initialised by ic_bootp_init_ext() allocates 8 bytes for tag 5 ("Name Server" [1, §3.7]), but tag 5 in the response isn't processed by ic_do_bootp_ext(). Instead, allocate the 8 bytes to tag 6 ("Domain Name Server" [1, §3.8]), which is processed by ic_do_bootp_ext(), and appears to have been the intended tag to request. This won't cause any breakage for existing users, as tag 5 responses provided by BOOTP servers weren't being processed anyway. [1] RFC 2132, "DHCP Options and BOOTP Vendor Extensions": https://tools.ietf.org/rfc/rfc2132.txt Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:34 +08:00
*e++ = 6; /* (DNS) name server request */
ipconfig: BOOTP: Request CONF_NAMESERVERS_MAX name servers When ipconfig is autoconfigured via BOOTP, the request packet initialised by ic_bootp_init_ext() always allocates 8 bytes for the name server option, limiting the BOOTP server to responding with at most 2 name servers even though ipconfig in fact supports an arbitrary number of name servers (as defined by CONF_NAMESERVERS_MAX, which is currently 3). Only request name servers in the request packet if CONF_NAMESERVERS_MAX is positive (to comply with [1, §3.8]), and allocate enough space in the packet for CONF_NAMESERVERS_MAX name servers to indicate the maximum number we can accept in response. [1] RFC 2132, "DHCP Options and BOOTP Vendor Extensions": https://tools.ietf.org/rfc/rfc2132.txt Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:35 +08:00
*e++ = 4 * CONF_NAMESERVERS_MAX;
e += 4 * CONF_NAMESERVERS_MAX;
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*e++ = 12; /* Host name request */
*e++ = 32;
e += 32;
*e++ = 40; /* NIS Domain name request */
*e++ = 32;
e += 32;
*e++ = 17; /* Boot path */
*e++ = 40;
e += 40;
[NET] IPV4: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 22:24:47 +08:00
*e++ = 57; /* set extension buffer size for reply */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*e++ = 2;
[NET] IPV4: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 22:24:47 +08:00
*e++ = 1; /* 128+236+8+20+14, see dhcpd sources */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*e++ = 150;
*e++ = 255; /* End of the list */
}
ipconfig: add nameserver IPs to kernel-parameter ip= On small systems (e.g. embedded ones) IP addresses are often configured by bootloaders and get assigned to kernel via parameter "ip=". If set to "ip=dhcp", even nameserver entries from DHCP daemons are handled. These entries exported in /proc/net/pnp are commonly linked by /etc/resolv.conf. To configure nameservers for networks without DHCP, this patch adds option <dns0-ip> and <dns1-ip> to kernel-parameter 'ip='. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Tested-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21 16:31:19 +08:00
/*
* Initialize the DHCP/BOOTP mechanism.
*/
static inline void __init ic_bootp_init(void)
{
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
/* Re-initialise all name servers and NTP servers to NONE, in case any
* were set via the "ip=" or "nfsaddrs=" kernel command line parameters:
* any IP addresses specified there will already have been decoded but
* are no longer needed
ipconfig: Correctly initialise ic_nameservers ic_nameservers, which stores the list of name servers discovered by ipconfig, is initialised (i.e. has all of its elements set to NONE, or 0xffffffff) by ic_nameservers_predef() in the following scenarios: - before the "ip=" and "nfsaddrs=" kernel command line parameters are parsed (in ip_auto_config_setup()); - before autoconfiguring via DHCP or BOOTP (in ic_bootp_init()), in order to clear any values that may have been set after parsing "ip=" or "nfsaddrs=" and are no longer needed. This means that ic_nameservers_predef() is not called when neither "ip=" nor "nfsaddrs=" is specified on the kernel command line. In this scenario, every element in ic_nameservers remains set to 0x00000000, which is indistinguishable from ANY and causes pnp_seq_show() to write the following (bogus) information to /proc/net/pnp: #MANUAL nameserver 0.0.0.0 nameserver 0.0.0.0 nameserver 0.0.0.0 This is potentially problematic for systems that blindly link /etc/resolv.conf to /proc/net/pnp. Ensure that ic_nameservers is also initialised when neither "ip=" nor "nfsaddrs=" are specified by calling ic_nameservers_predef() in ip_auto_config(), but only when ip_auto_config_setup() was not called earlier. This causes the following to be written to /proc/net/pnp, and is consistent with what gets written when ipconfig is configured manually but no name servers are specified on the kernel command line: #MANUAL Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:37 +08:00
*/
ipconfig: add nameserver IPs to kernel-parameter ip= On small systems (e.g. embedded ones) IP addresses are often configured by bootloaders and get assigned to kernel via parameter "ip=". If set to "ip=dhcp", even nameserver entries from DHCP daemons are handled. These entries exported in /proc/net/pnp are commonly linked by /etc/resolv.conf. To configure nameservers for networks without DHCP, this patch adds option <dns0-ip> and <dns1-ip> to kernel-parameter 'ip='. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Tested-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21 16:31:19 +08:00
ic_nameservers_predef();
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
ic_ntp_servers_predef();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dev_add_pack(&bootp_packet_type);
}
/*
* DHCP/BOOTP cleanup.
*/
ipv4: annotate a few functions __init in ipconfig.c A few functions are only used from __init context. So annotate these with __init for consistency and silence the following warnings: WARNING: net/ipv4/built-in.o(.text+0x2a876): Section mismatch in reference from the function ic_bootp_init() to the variable .init.data:bootp_packet_type WARNING: net/ipv4/built-in.o(.text+0x2a907): Section mismatch in reference from the function ic_bootp_cleanup() to the variable .init.data:bootp_packet_type Note: The warnings only appear with CONFIG_DEBUG_SECTION_MISMATCH=y Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-30 11:58:15 +08:00
static inline void __init ic_bootp_cleanup(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
dev_remove_pack(&bootp_packet_type);
}
/*
* Send DHCP/BOOTP request to single interface.
*/
static void __init ic_bootp_send_if(struct ic_device *d, unsigned long jiffies_diff)
{
struct net_device *dev = d->dev;
struct sk_buff *skb;
struct bootp_pkt *b;
struct iphdr *h;
ipv4: Remove all uses of LL_ALLOCATED_SPACE ipv4: Remove all uses of LL_ALLOCATED_SPACE The macro LL_ALLOCATED_SPACE was ill-conceived. It applies the alignment to the sum of needed_headroom and needed_tailroom. As the amount that is then reserved for head room is needed_headroom with alignment, this means that the tail room left may be too small. This patch replaces all uses of LL_ALLOCATED_SPACE in net/ipv4 with the macro LL_RESERVED_SPACE and direct reference to needed_tailroom. This also fixes the problem with needed_headroom changing between allocating the skb and reserving the head room. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-18 10:20:04 +08:00
int hlen = LL_RESERVED_SPACE(dev);
int tlen = dev->needed_tailroom;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Allocate packet */
ipv4: Remove all uses of LL_ALLOCATED_SPACE ipv4: Remove all uses of LL_ALLOCATED_SPACE The macro LL_ALLOCATED_SPACE was ill-conceived. It applies the alignment to the sum of needed_headroom and needed_tailroom. As the amount that is then reserved for head room is needed_headroom with alignment, this means that the tail room left may be too small. This patch replaces all uses of LL_ALLOCATED_SPACE in net/ipv4 with the macro LL_RESERVED_SPACE and direct reference to needed_tailroom. This also fixes the problem with needed_headroom changing between allocating the skb and reserving the head room. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-18 10:20:04 +08:00
skb = alloc_skb(sizeof(struct bootp_pkt) + hlen + tlen + 15,
net: Allow netdevices to specify needed head/tailroom This patch adds needed_headroom/needed_tailroom members to struct net_device and updates many places that allocate sbks to use them. Not all of them can be converted though, and I'm sure I missed some (I mostly grepped for LL_RESERVED_SPACE) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-13 11:48:31 +08:00
GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!skb)
return;
ipv4: Remove all uses of LL_ALLOCATED_SPACE ipv4: Remove all uses of LL_ALLOCATED_SPACE The macro LL_ALLOCATED_SPACE was ill-conceived. It applies the alignment to the sum of needed_headroom and needed_tailroom. As the amount that is then reserved for head room is needed_headroom with alignment, this means that the tail room left may be too small. This patch replaces all uses of LL_ALLOCATED_SPACE in net/ipv4 with the macro LL_RESERVED_SPACE and direct reference to needed_tailroom. This also fixes the problem with needed_headroom changing between allocating the skb and reserving the head room. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-18 10:20:04 +08:00
skb_reserve(skb, hlen);
networking: convert many more places to skb_put_zero() There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 20:29:19 +08:00
b = skb_put_zero(skb, sizeof(struct bootp_pkt));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Construct IP header */
[SK_BUFF] ipconfig: Another conversion to skb_reset_network_header related to skb_put boot_pkt->iph is the first member, that is at skb->data, so just use skb_reset_network_header(). Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-11 06:27:27 +08:00
skb_reset_network_header(skb);
[SK_BUFF]: Introduce ip_hdr(), remove skb->nh.iph Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 13:47:35 +08:00
h = ip_hdr(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
h->version = 4;
h->ihl = 5;
h->tot_len = htons(sizeof(struct bootp_pkt));
h->frag_off = htons(IP_DF);
h->ttl = 64;
h->protocol = IPPROTO_UDP;
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
h->daddr = htonl(INADDR_BROADCAST);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
h->check = ip_fast_csum((unsigned char *) h, h->ihl);
/* Construct UDP header */
b->udph.source = htons(68);
b->udph.dest = htons(67);
b->udph.len = htons(sizeof(struct bootp_pkt) - sizeof(struct iphdr));
/* UDP checksum not calculated -- explicitly allowed in BOOTP RFC */
/* Construct DHCP/BOOTP header */
b->op = BOOTP_REQUEST;
if (dev->type < 256) /* check for false types */
b->htype = dev->type;
else if (dev->type == ARPHRD_FDDI)
b->htype = ARPHRD_ETHER;
else {
net ipv4: use preferred log methods Replace printk calls with preferred unconditional log method calls to keep kernel messages clean. Added newline to "too small MTU" message. Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-13 18:40:34 +08:00
pr_warn("Unknown ARP type 0x%04x for device %s\n", dev->type,
dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
b->htype = dev->type; /* can cause undefined behavior */
}
[IPCONFIG]: The kernel gets no IP from some DHCP servers From: Stephen Hemminger <shemminger@linux-foundation.org> Based upon a patch by Marcel Wappler: This patch fixes a DHCP issue of the kernel: some DHCP servers (i.e. in the Linksys WRT54Gv5) are very strict about the contents of the DHCPDISCOVER packet they receive from clients. Table 5 in RFC2131 page 36 requests the fields 'ciaddr' and 'siaddr' MUST be set to '0'. These DHCP servers ignore Linux kernel's DHCP discovery packets with these two fields set to '255.255.255.255' (in contrast to popular DHCP clients, such as 'dhclient' or 'udhcpc'). This leads to a not booting system. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 09:03:49 +08:00
/* server_ip and your_ip address are both already zero per RFC2131 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
b->hlen = dev->addr_len;
memcpy(b->hw_addr, dev->dev_addr, dev->addr_len);
b->secs = htons(jiffies_diff / HZ);
b->xid = d->xid;
/* add DHCP options or BOOTP extensions */
#ifdef IPCONFIG_DHCP
if (ic_proto_enabled & IC_USE_DHCP)
net: ipconfig: Add device name to debug messages This simplifies understanding what happens when there is more than one device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 17:30:37 +08:00
ic_dhcp_init_options(b->exten, d);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
else
#endif
ic_bootp_init_ext(b->exten);
/* Chain packet down the line... */
skb->dev = dev;
skb->protocol = htons(ETH_P_IP);
[NET]: Wrap netdevice hardware header creation. Add inline for common usage of hardware header creation, and fix bug in IPV6 mcast where the assumption about negative return is an errno. Negative return from hard_header means not enough space was available,(ie -N bytes). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-09 16:36:32 +08:00
if (dev_hard_header(skb, dev, ntohs(skb->protocol),
ipv4: fix a memory leak in ic_bootp_send_if when dev_hard_header() failed, the newly allocated skb should be freed. Signed-off-by: RongQing.Li <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-15 03:37:24 +08:00
dev->broadcast, dev->dev_addr, skb->len) < 0) {
kfree_skb(skb);
printk("E");
return;
}
if (dev_queue_xmit(skb) < 0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk("E");
}
/*
* Copy BOOTP-supplied string if not already set.
*/
static int __init ic_bootp_string(char *dest, char *src, int len, int max)
{
if (!len)
return 0;
if (len > max-1)
len = max-1;
memcpy(dest, src, len);
dest[len] = '\0';
return 1;
}
/*
* Process BOOTP extensions.
*/
static void __init ic_do_bootp_ext(u8 *ext)
{
net: fix some sparse errors make C=2 CF="-D__CHECK_ENDIAN__" M=net And fix flowi4_init_output() prototype for sport Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17 03:27:39 +08:00
u8 servers;
int i;
__be16 mtu;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
u8 *c;
net ipv4: use preferred log methods Replace printk calls with preferred unconditional log method calls to keep kernel messages clean. Added newline to "too small MTU" message. Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-13 18:40:34 +08:00
pr_debug("DHCP/BOOTP: Got extension %d:", *ext);
[IPV4]: cleanup Add whitespace around keywords. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-09 12:44:43 +08:00
for (c=ext+2; c<ext+2+ext[1]; c++)
net ipv4: use preferred log methods Replace printk calls with preferred unconditional log method calls to keep kernel messages clean. Added newline to "too small MTU" message. Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-13 18:40:34 +08:00
pr_debug(" %02x", *c);
pr_debug("\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
switch (*ext++) {
ipconfig: Reduce switch/case indent Make the case labels the same indent as the switch. git diff -w shows miscellaneous 80 column wrapping. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 17:43:05 +08:00
case 1: /* Subnet mask */
if (ic_netmask == NONE)
memcpy(&ic_netmask, ext+1, 4);
break;
case 3: /* Default gateway */
if (ic_gateway == NONE)
memcpy(&ic_gateway, ext+1, 4);
break;
case 6: /* DNS server */
servers= *ext/4;
if (servers > CONF_NAMESERVERS_MAX)
servers = CONF_NAMESERVERS_MAX;
for (i = 0; i < servers; i++) {
if (ic_nameservers[i] == NONE)
memcpy(&ic_nameservers[i], ext+1+4*i, 4);
}
break;
case 12: /* Host name */
ic_bootp_string(utsname()->nodename, ext+1, *ext,
__NEW_UTS_LEN);
ic_host_name_set = 1;
break;
case 15: /* Domain name (DNS) */
ic_bootp_string(ic_domain, ext+1, *ext, sizeof(ic_domain));
break;
case 17: /* Root path */
if (!root_server_path[0])
ic_bootp_string(root_server_path, ext+1, *ext,
sizeof(root_server_path));
break;
case 26: /* Interface MTU */
memcpy(&mtu, ext+1, sizeof(mtu));
ic_dev_mtu = ntohs(mtu);
break;
case 40: /* NIS Domain name (_not_ DNS) */
ic_bootp_string(utsname()->domainname, ext+1, *ext,
__NEW_UTS_LEN);
break;
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
case 42: /* NTP servers */
servers = *ext / 4;
if (servers > CONF_NTP_SERVERS_MAX)
servers = CONF_NTP_SERVERS_MAX;
for (i = 0; i < servers; i++) {
if (ic_ntp_servers[i] == NONE)
memcpy(&ic_ntp_servers[i], ext+1+4*i, 4);
}
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
/*
* Receive BOOTP reply.
*/
[NET]: Kill skb->real_dev Bonding just wants the device before the skb_bond() decapsulation occurs, so simply pass that original device into packet_type->func() as an argument. It remains to be seen whether we can use this same exact thing to get rid of skb->input_dev as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-10 10:34:12 +08:00
static int __init ic_bootp_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct bootp_pkt *b;
struct iphdr *h;
struct ic_device *d;
int len, ext_len;
netns: Use net_eq() to compare net-namespaces for optimization. Without CONFIG_NET_NS, namespace is always &init_net. Compiler will be able to omit namespace comparisons with this patch. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-20 13:34:43 +08:00
if (!net_eq(dev_net(dev), &init_net))
[NET]: Make packet reception network namespace safe This patch modifies every packet receive function registered with dev_add_pack() to drop packets if they are not from the initial network namespace. This should ensure that the various network stacks do not receive packets in a anything but the initial network namespace until the code has been converted and is ready for them. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-18 02:53:39 +08:00
goto drop;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Perform verifications before taking the lock. */
if (skb->pkt_type == PACKET_OTHERHOST)
goto drop;
ipv4: coding style: comparison for equality with NULL The ipv4 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-03 16:17:26 +08:00
skb = skb_share_check(skb, GFP_ATOMIC);
if (!skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return NET_RX_DROP;
if (!pskb_may_pull(skb,
sizeof(struct iphdr) +
sizeof(struct udphdr)))
goto drop;
[SK_BUFF]: Introduce ip_hdr(), remove skb->nh.iph Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 13:47:35 +08:00
b = (struct bootp_pkt *)skb_network_header(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
h = &b->iph;
if (h->ihl != 5 || h->version != 4 || h->protocol != IPPROTO_UDP)
goto drop;
/* Fragments are not supported */
ip: introduce ip_is_fragment helper inline function There are enough instances of this: iph->frag_off & htons(IP_MF | IP_OFFSET) that a helper function is probably warranted. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-22 11:33:34 +08:00
if (ip_is_fragment(h)) {
net: Convert net_ratelimit uses to net_<level>_ratelimited Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-14 05:56:26 +08:00
net_err_ratelimited("DHCP/BOOTP: Ignoring fragmented reply\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto drop;
}
if (skb->len < ntohs(h->tot_len))
goto drop;
if (ip_fast_csum((char *) h, h->ihl))
goto drop;
if (b->udph.source != htons(67) || b->udph.dest != htons(68))
goto drop;
if (ntohs(h->tot_len) < ntohs(b->udph.len) + sizeof(struct iphdr))
goto drop;
len = ntohs(b->udph.len) - sizeof(struct udphdr);
ext_len = len - (sizeof(*b) -
sizeof(struct iphdr) -
sizeof(struct udphdr) -
sizeof(b->exten));
if (ext_len < 0)
goto drop;
/* Ok the front looks good, make sure we can get at the rest. */
if (!pskb_may_pull(skb, skb->len))
goto drop;
[SK_BUFF]: Introduce ip_hdr(), remove skb->nh.iph Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 13:47:35 +08:00
b = (struct bootp_pkt *)skb_network_header(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
h = &b->iph;
/* One reply at a time, please. */
spin_lock(&ic_recv_lock);
/* If we already have a reply, just drop the packet */
if (ic_got_reply)
goto drop_unlock;
/* Find the ic_device that the packet arrived on */
d = ic_first_dev;
while (d && d->dev != dev)
d = d->next;
if (!d)
goto drop_unlock; /* should never happen */
/* Is it a reply to our BOOTP request? */
if (b->op != BOOTP_REPLY ||
b->xid != d->xid) {
net: ipconfig: Add device name to debug messages This simplifies understanding what happens when there is more than one device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 17:30:37 +08:00
net_err_ratelimited("DHCP/BOOTP: Reply not for us on %s, op[%x] xid[%x]\n",
d->dev->name, b->op, b->xid);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto drop_unlock;
}
/* Parse extensions */
if (ext_len >= 4 &&
!memcmp(b->exten, ic_bootp_cookie, 4)) { /* Check magic cookie */
[NET] IPV4: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 22:24:47 +08:00
u8 *end = (u8 *) b + ntohs(b->iph.tot_len);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
u8 *ext;
#ifdef IPCONFIG_DHCP
if (ic_proto_enabled & IC_USE_DHCP) {
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
__be32 server_id = NONE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int mt = 0;
ext = &b->exten[4];
while (ext < end && *ext != 0xff) {
u8 *opt = ext++;
if (*opt == 0) /* Padding */
continue;
ext += *ext + 1;
if (ext >= end)
break;
switch (*opt) {
case 53: /* Message type */
if (opt[1])
mt = opt[2];
break;
case 54: /* Server ID (IP address) */
if (opt[1] >= 4)
memcpy(&server_id, opt + 2, 4);
break;
[NET]: cleanup extra semicolons Spring cleaning time... There seems to be a lot of places in the network code that have extra bogus semicolons after conditionals. Most commonly is a bogus semicolon after: switch() { } Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 08:09:22 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
net: ipconfig: Add device name to debug messages This simplifies understanding what happens when there is more than one device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 17:30:37 +08:00
pr_debug("DHCP: Got message type %d (%s)\n", mt, d->dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
switch (mt) {
case DHCPOFFER:
/* While in the process of accepting one offer,
* ignore all others.
*/
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
if (ic_myaddr != NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto drop_unlock;
/* Let's accept that offer. */
ic_myaddr = b->your_ip;
ic_servaddr = server_id;
net ipv4: use preferred log methods Replace printk calls with preferred unconditional log method calls to keep kernel messages clean. Added newline to "too small MTU" message. Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-13 18:40:34 +08:00
pr_debug("DHCP: Offered address %pI4 by server %pI4\n",
&ic_myaddr, &b->iph.saddr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* The DHCP indicated server address takes
* precedence over the bootp header one if
* they are different.
*/
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
if ((server_id != NONE) &&
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
(b->server_ip != server_id))
b->server_ip = ic_servaddr;
break;
case DHCPACK:
if (memcmp(dev->dev_addr, b->hw_addr, dev->addr_len) != 0)
goto drop_unlock;
/* Yeah! */
break;
default:
/* Urque. Forget it*/
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
ic_myaddr = NONE;
ic_servaddr = NONE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto drop_unlock;
[NET]: cleanup extra semicolons Spring cleaning time... There seems to be a lot of places in the network code that have extra bogus semicolons after conditionals. Most commonly is a bogus semicolon after: switch() { } Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21 08:09:22 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ic_dhcp_msgtype = mt;
}
#endif /* IPCONFIG_DHCP */
ext = &b->exten[4];
while (ext < end && *ext != 0xff) {
u8 *opt = ext++;
if (*opt == 0) /* Padding */
continue;
ext += *ext + 1;
if (ext < end)
ic_do_bootp_ext(opt);
}
}
/* We have a winner! */
net: ipconfig: Support using "delayed" DHCP replies The dhcp code only waits 1s between sending DHCP requests on different devices and only accepts an answer for the device that sent out the last request. Only the timeout at the end of a loop is increased iteratively which favours only the last device. This makes it impossible to work with a dhcp server that takes little more than 1s connected to a device that is not the last one. Instead of also increasing the inter-device timeout, teach the code to handle delayed replies. To accomplish that, make *ic_dev track the current ic_device instead of the current net_device and adapt all users accordingly. The relevant change then is to reset d to ic_dev on a reply to assert that the followup request goes through the right device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 17:30:38 +08:00
ic_dev = d;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ic_myaddr = b->your_ip;
ic_servaddr = b->server_ip;
net/ipv4/ipconfig: really display the BOOTP/DHCP server's address. Up to now, the debug and info messages from the ipconfig subsytem claim to display the IP address of the DHCP/BOOTP server but display instead the IP address of the bootserver. Fix that. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04 02:02:12 +08:00
ic_addrservaddr = b->iph.saddr;
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
if (ic_gateway == NONE && b->relay_ip)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ic_gateway = b->relay_ip;
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
if (ic_nameservers[0] == NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ic_nameservers[0] = ic_servaddr;
ic_got_reply = IC_BOOTP;
drop_unlock:
/* Show's over. Nothing to see here. */
spin_unlock(&ic_recv_lock);
drop:
/* Throw the packet out. */
kfree_skb(skb);
return 0;
[NET] IPV4: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 22:24:47 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
/*
* Dynamic IP configuration -- DHCP, BOOTP, RARP.
*/
#ifdef IPCONFIG_DYNAMIC
static int __init ic_dynamic(void)
{
int retries;
struct ic_device *d;
unsigned long start_jiffies, timeout, jiff;
int do_bootp = ic_proto_have_if & IC_BOOTP;
int do_rarp = ic_proto_have_if & IC_RARP;
/*
* If none of DHCP/BOOTP/RARP was selected, return with an error.
* This routine gets only called when some pieces of information
* are missing, and without DHCP/BOOTP/RARP we are unable to get it.
*/
if (!ic_proto_enabled) {
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_err("IP-Config: Incomplete network configuration information\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -1;
}
#ifdef IPCONFIG_BOOTP
if ((ic_proto_enabled ^ ic_proto_have_if) & IC_BOOTP)
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_err("DHCP/BOOTP: No suitable device found\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
#ifdef IPCONFIG_RARP
if ((ic_proto_enabled ^ ic_proto_have_if) & IC_RARP)
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_err("RARP: No suitable device found\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
if (!ic_proto_have_if)
/* Error message already printed */
return -1;
/*
* Setup protocols
*/
#ifdef IPCONFIG_BOOTP
if (do_bootp)
ic_bootp_init();
#endif
#ifdef IPCONFIG_RARP
if (do_rarp)
ic_rarp_init();
#endif
/*
* Send requests and wait, until we get an answer. This loop
* seems to be a terrible waste of CPU time, but actually there is
* only one process running at all, so we don't need to use any
* scheduler functions.
[NET] IPV4: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 22:24:47 +08:00
* [Actually we could now, but the nothing else running note still
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* applies.. - AC]
*/
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_notice("Sending %s%s%s requests .",
do_bootp
? ((ic_proto_enabled & IC_USE_DHCP) ? "DHCP" : "BOOTP") : "",
(do_bootp && do_rarp) ? " and " : "",
do_rarp ? "RARP" : "");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
start_jiffies = jiffies;
d = ic_first_dev;
retries = CONF_SEND_RETRIES;
get_random_bytes(&timeout, sizeof(timeout));
net: cleanup unsigned to unsigned int Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 13:58:06 +08:00
timeout = CONF_BASE_TIMEOUT + (timeout % (unsigned int) CONF_TIMEOUT_RANDOM);
[IPV4]: cleanup Add whitespace around keywords. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-09 12:44:43 +08:00
for (;;) {
ipconfig: Only bootp paths should reference ic_dev_xid. It is only tested, and declared, in the bootp code. So, in ic_dynamic() guard it's setting with IPCONFIG_BOOTP. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10 13:25:18 +08:00
#ifdef IPCONFIG_BOOTP
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (do_bootp && (d->able & IC_BOOTP))
ic_bootp_send_if(d, jiffies - start_jiffies);
#endif
#ifdef IPCONFIG_RARP
if (do_rarp && (d->able & IC_RARP))
ic_rarp_send_if(d);
#endif
net: ipconfig: drop inter-device timeout Now that ipconfig learned to handle "delayed replies" in the previous commit, there is no reason any more to delay sending a first request per device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 17:30:39 +08:00
if (!d->next) {
jiff = jiffies + timeout;
while (time_before(jiffies, jiff) && !ic_got_reply)
schedule_timeout_uninterruptible(1);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef IPCONFIG_DHCP
/* DHCP isn't done until we get a DHCPACK. */
net/ipv4: Move && and || to end of previous line On Sun, 2009-11-22 at 16:31 -0800, David Miller wrote: > It should be of the form: > if (x && > y) > > or: > if (x && y) > > Fix patches, rather than complaints, for existing cases where things > do not follow this pattern are certainly welcome. Also collapsed some multiple tabs to single space. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 02:41:23 +08:00
if ((ic_got_reply & IC_BOOTP) &&
(ic_proto_enabled & IC_USE_DHCP) &&
ic_dhcp_msgtype != DHCPACK) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ic_got_reply = 0;
net: ipconfig: Support using "delayed" DHCP replies The dhcp code only waits 1s between sending DHCP requests on different devices and only accepts an answer for the device that sent out the last request. Only the timeout at the end of a loop is increased iteratively which favours only the last device. This makes it impossible to work with a dhcp server that takes little more than 1s connected to a device that is not the last one. Instead of also increasing the inter-device timeout, teach the code to handle delayed replies. To accomplish that, make *ic_dev track the current ic_device instead of the current net_device and adapt all users accordingly. The relevant change then is to reset d to ic_dev on a reply to assert that the followup request goes through the right device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 17:30:38 +08:00
/* continue on device that got the reply */
d = ic_dev;
net/ipv4/ipconfig: Rejoin broken lines in console output Commit 09605cc12c078306 ("net ipv4: use preferred log methods") replaced a few calls of pr_cont() after a console print without a trailing newline by pr_info(), causing lines to be split during IP autoconfiguration, like: . , OK IP-Config: Got DHCP answer from 192.168.97.254, my address is 192.168.97.44 Convert these back to using pr_cont(), so it prints again: ., OK IP-Config: Got DHCP answer from 192.168.97.254, my address is 192.168.97.44 Absorb the printing of "my address ..." into the previous call to pr_info(), as there's no reason to use a continuation there. Convert one more pr_info() to print nameservers while we're at it. Fixes: 09605cc12c078306 ("net ipv4: use preferred log methods") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-24 21:08:23 +08:00
pr_cont(",");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
continue;
}
#endif /* IPCONFIG_DHCP */
if (ic_got_reply) {
net/ipv4/ipconfig: Rejoin broken lines in console output Commit 09605cc12c078306 ("net ipv4: use preferred log methods") replaced a few calls of pr_cont() after a console print without a trailing newline by pr_info(), causing lines to be split during IP autoconfiguration, like: . , OK IP-Config: Got DHCP answer from 192.168.97.254, my address is 192.168.97.44 Convert these back to using pr_cont(), so it prints again: ., OK IP-Config: Got DHCP answer from 192.168.97.254, my address is 192.168.97.44 Absorb the printing of "my address ..." into the previous call to pr_info(), as there's no reason to use a continuation there. Convert one more pr_info() to print nameservers while we're at it. Fixes: 09605cc12c078306 ("net ipv4: use preferred log methods") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-24 21:08:23 +08:00
pr_cont(" OK\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
}
if ((d = d->next))
continue;
if (! --retries) {
net/ipv4/ipconfig: Rejoin broken lines in console output Commit 09605cc12c078306 ("net ipv4: use preferred log methods") replaced a few calls of pr_cont() after a console print without a trailing newline by pr_info(), causing lines to be split during IP autoconfiguration, like: . , OK IP-Config: Got DHCP answer from 192.168.97.254, my address is 192.168.97.44 Convert these back to using pr_cont(), so it prints again: ., OK IP-Config: Got DHCP answer from 192.168.97.254, my address is 192.168.97.44 Absorb the printing of "my address ..." into the previous call to pr_info(), as there's no reason to use a continuation there. Convert one more pr_info() to print nameservers while we're at it. Fixes: 09605cc12c078306 ("net ipv4: use preferred log methods") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-24 21:08:23 +08:00
pr_cont(" timed out!\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
}
d = ic_first_dev;
timeout = timeout CONF_TIMEOUT_MULT;
if (timeout > CONF_TIMEOUT_MAX)
timeout = CONF_TIMEOUT_MAX;
net/ipv4/ipconfig: Rejoin broken lines in console output Commit 09605cc12c078306 ("net ipv4: use preferred log methods") replaced a few calls of pr_cont() after a console print without a trailing newline by pr_info(), causing lines to be split during IP autoconfiguration, like: . , OK IP-Config: Got DHCP answer from 192.168.97.254, my address is 192.168.97.44 Convert these back to using pr_cont(), so it prints again: ., OK IP-Config: Got DHCP answer from 192.168.97.254, my address is 192.168.97.44 Absorb the printing of "my address ..." into the previous call to pr_info(), as there's no reason to use a continuation there. Convert one more pr_info() to print nameservers while we're at it. Fixes: 09605cc12c078306 ("net ipv4: use preferred log methods") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-24 21:08:23 +08:00
pr_cont(".");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
#ifdef IPCONFIG_BOOTP
if (do_bootp)
ic_bootp_cleanup();
#endif
#ifdef IPCONFIG_RARP
if (do_rarp)
ic_rarp_cleanup();
#endif
[IPV4]: ipconfig.c: fix dhcp timeout behaviour I think there is a small bug in ipconfig.c in case IPCONFIG_DHCP is set and dhcp is used. When a DHCPOFFER is received, ip address is kept until we get DHCPACK. If no ack is received, ic_dynamic() returns negatively, but leaves the offered ip address in ic_myaddr. This makes the main loop in ip_auto_config() break and uses the maybe incomplete configuration. Not sure if it's the best way to do, but the following trivial patch correct this. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-29 04:21:12 +08:00
if (!ic_got_reply) {
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
ic_myaddr = NONE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -1;
[IPV4]: ipconfig.c: fix dhcp timeout behaviour I think there is a small bug in ipconfig.c in case IPCONFIG_DHCP is set and dhcp is used. When a DHCPOFFER is received, ip address is kept until we get DHCPACK. If no ack is received, ic_dynamic() returns negatively, but leaves the offered ip address in ic_myaddr. This makes the main loop in ip_auto_config() break and uses the maybe incomplete configuration. Not sure if it's the best way to do, but the following trivial patch correct this. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-29 04:21:12 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
net/ipv4/ipconfig: Rejoin broken lines in console output Commit 09605cc12c078306 ("net ipv4: use preferred log methods") replaced a few calls of pr_cont() after a console print without a trailing newline by pr_info(), causing lines to be split during IP autoconfiguration, like: . , OK IP-Config: Got DHCP answer from 192.168.97.254, my address is 192.168.97.44 Convert these back to using pr_cont(), so it prints again: ., OK IP-Config: Got DHCP answer from 192.168.97.254, my address is 192.168.97.44 Absorb the printing of "my address ..." into the previous call to pr_info(), as there's no reason to use a continuation there. Convert one more pr_info() to print nameservers while we're at it. Fixes: 09605cc12c078306 ("net ipv4: use preferred log methods") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-24 21:08:23 +08:00
pr_info("IP-Config: Got %s answer from %pI4, my address is %pI4\n",
[NET] IPV4: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 22:24:47 +08:00
((ic_got_reply & IC_RARP) ? "RARP"
net ipv4: use preferred log methods Replace printk calls with preferred unconditional log method calls to keep kernel messages clean. Added newline to "too small MTU" message. Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-13 18:40:34 +08:00
: (ic_proto_enabled & IC_USE_DHCP) ? "DHCP" : "BOOTP"),
net/ipv4/ipconfig: Rejoin broken lines in console output Commit 09605cc12c078306 ("net ipv4: use preferred log methods") replaced a few calls of pr_cont() after a console print without a trailing newline by pr_info(), causing lines to be split during IP autoconfiguration, like: . , OK IP-Config: Got DHCP answer from 192.168.97.254, my address is 192.168.97.44 Convert these back to using pr_cont(), so it prints again: ., OK IP-Config: Got DHCP answer from 192.168.97.254, my address is 192.168.97.44 Absorb the printing of "my address ..." into the previous call to pr_info(), as there's no reason to use a continuation there. Convert one more pr_info() to print nameservers while we're at it. Fixes: 09605cc12c078306 ("net ipv4: use preferred log methods") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-24 21:08:23 +08:00
&ic_addrservaddr, &ic_myaddr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
}
#endif /* IPCONFIG_DYNAMIC */
#ifdef CONFIG_PROC_FS
net: ipv4: ipconfig: fix unused variable When CONFIG_PROC_FS isn't set, variable ipconfig_dir isn't used. net/ipv4/ipconfig.c:167:31: warning: ‘ipconfig_dir’ defined but not used [-Wunused-variable] static struct proc_dir_entry *ipconfig_dir; ^~~~~~~~~~~~ Move the declaration of ipconfig_dir inside the CONFIG_PROC_FS ifdef to fix the warning. Fixes: c04d2cb2009f ("ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 03:48:30 +08:00
/* proc_dir_entry for /proc/net/ipconfig */
static struct proc_dir_entry *ipconfig_dir;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
/* Name servers: */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int pnp_seq_show(struct seq_file *seq, void *v)
{
int i;
if (ic_proto_used & IC_PROTO)
seq_printf(seq, "#PROTO: %s\n",
(ic_proto_used & IC_RARP) ? "RARP"
: (ic_proto_used & IC_USE_DHCP) ? "DHCP" : "BOOTP");
else
seq_puts(seq, "#MANUAL\n");
if (ic_domain[0])
seq_printf(seq,
"domain %s\n", ic_domain);
for (i = 0; i < CONF_NAMESERVERS_MAX; i++) {
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
if (ic_nameservers[i] != NONE)
net: replace NIPQUAD() in net/ipv4/ net/ipv6/ Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31 15:53:57 +08:00
seq_printf(seq, "nameserver %pI4\n",
&ic_nameservers[i]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
if (ic_servaddr != NONE)
net: replace NIPQUAD() in net/ipv4/ net/ipv6/ Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31 15:53:57 +08:00
seq_printf(seq, "bootserver %pI4\n",
&ic_servaddr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
}
ipconfig: Create /proc/net/ipconfig directory To allow ipconfig to report IP configuration details to user space processes without cluttering /proc/net, create a new subdirectory /proc/net/ipconfig. All files containing IP configuration details should be written to this directory. Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:38 +08:00
/* Create the /proc/net/ipconfig directory */
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
static int __init ipconfig_proc_net_init(void)
ipconfig: Create /proc/net/ipconfig directory To allow ipconfig to report IP configuration details to user space processes without cluttering /proc/net, create a new subdirectory /proc/net/ipconfig. All files containing IP configuration details should be written to this directory. Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:38 +08:00
{
ipconfig_dir = proc_net_mkdir(&init_net, "ipconfig", init_net.proc_net);
if (!ipconfig_dir)
return -ENOMEM;
return 0;
}
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
/* Create a new file under /proc/net/ipconfig */
static int ipconfig_proc_net_create(const char *name,
const struct file_operations *fops)
{
char *pname;
struct proc_dir_entry *p;
if (!ipconfig_dir)
return -ENOMEM;
pname = kasprintf(GFP_KERNEL, "%s%s", "ipconfig/", name);
if (!pname)
return -ENOMEM;
p = proc_create(pname, 0444, init_net.proc_net, fops);
kfree(pname);
if (!p)
return -ENOMEM;
return 0;
}
/* Write NTP server IP addresses to /proc/net/ipconfig/ntp_servers */
static int ntp_servers_seq_show(struct seq_file *seq, void *v)
{
int i;
for (i = 0; i < CONF_NTP_SERVERS_MAX; i++) {
if (ic_ntp_servers[i] != NONE)
seq_printf(seq, "%pI4\n", &ic_ntp_servers[i]);
}
return 0;
}
ipconfig: convert to DEFINE_SHOW_ATTRIBUTE Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15 15:19:53 +08:00
DEFINE_SHOW_ATTRIBUTE(ntp_servers_seq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif /* CONFIG_PROC_FS */
/*
* Extract IP address from the parameter string if needed. Note that we
* need to have root_server_addr set _before_ IPConfig gets called as it
* can override it.
*/
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
__be32 __init root_nfs_parse_addr(char *name)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
__be32 addr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int octets = 0;
char *cp, *cq;
cp = cq = name;
while (octets < 4) {
while (*cp >= '0' && *cp <= '9')
cp++;
if (cp == cq || cp - cq > 3)
break;
if (*cp == '.' || octets == 3)
octets++;
if (octets < 4)
cp++;
cq = cp;
}
if (octets == 4 && (*cp == ':' || *cp == '\0')) {
if (*cp == ':')
*cp++ = '\0';
addr = in_aton(name);
memmove(name, cp, strlen(cp) + 1);
} else
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
addr = NONE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return addr;
}
ipconfig: Handle devices which take some time to come up. Some network devices, particularly USB ones, take several seconds to fully init and appear in the device list. If the user turned ipconfig on, they are using it for NFS root or some other early booting purpose. So it makes no sense to just flat out fail immediately if the device isn't found. It also doesn't make sense to just jack up the initial wait to something crazy like 10 seconds. Instead, poll immediately, and then periodically once a second, waiting for a usable device to appear. Fail after 12 seconds. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Christian Pellegrin <chripell@fsfe.org>
2010-03-12 16:00:17 +08:00
#define DEVICE_WAIT_MAX 12 /* 12 seconds */
static int __init wait_for_devices(void)
{
int i;
for (i = 0; i < DEVICE_WAIT_MAX; i++) {
struct net_device *dev;
int found = 0;
rtnl_lock();
for_each_netdev(&init_net, dev) {
ipconfig wait for carrier v3 -> v4: fix return boolean false instead of 0 for ic_is_init_dev Currently the ip auto configuration has a hardcoded delay of 1 second. When (ethernet) link takes longer to come up (e.g. more than 3 seconds), nfs root may not be found. Remove the hardcoded delay, and wait for carrier on at least one network device. Signed-off-by: Micha Nelissen <micha@neli.hopto.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 18:14:06 +08:00
if (ic_is_init_dev(dev)) {
ipconfig: Handle devices which take some time to come up. Some network devices, particularly USB ones, take several seconds to fully init and appear in the device list. If the user turned ipconfig on, they are using it for NFS root or some other early booting purpose. So it makes no sense to just flat out fail immediately if the device isn't found. It also doesn't make sense to just jack up the initial wait to something crazy like 10 seconds. Instead, poll immediately, and then periodically once a second, waiting for a usable device to appear. Fail after 12 seconds. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Christian Pellegrin <chripell@fsfe.org>
2010-03-12 16:00:17 +08:00
found = 1;
break;
}
}
rtnl_unlock();
if (found)
return 0;
ssleep(1);
}
return -ENODEV;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* IP Autoconfig dispatcher.
*/
static int __init ip_auto_config(void)
{
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
__be32 addr;
ipv4: fix infinite retry loop in IP-Config Signed-off-by: Benjamin Zores <benjamin.zores@alcatel-lucent.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-30 08:19:13 +08:00
#ifdef IPCONFIG_DYNAMIC
int retries = CONF_OPEN_RETRIES;
#endif
ipconfig: Handle devices which take some time to come up. Some network devices, particularly USB ones, take several seconds to fully init and appear in the device list. If the user turned ipconfig on, they are using it for NFS root or some other early booting purpose. So it makes no sense to just flat out fail immediately if the device isn't found. It also doesn't make sense to just jack up the initial wait to something crazy like 10 seconds. Instead, poll immediately, and then periodically once a second, waiting for a usable device to appear. Fail after 12 seconds. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Christian Pellegrin <chripell@fsfe.org>
2010-03-12 16:00:17 +08:00
int err;
ipconfig: add nameserver IPs to kernel-parameter ip= On small systems (e.g. embedded ones) IP addresses are often configured by bootloaders and get assigned to kernel via parameter "ip=". If set to "ip=dhcp", even nameserver entries from DHCP daemons are handled. These entries exported in /proc/net/pnp are commonly linked by /etc/resolv.conf. To configure nameservers for networks without DHCP, this patch adds option <dns0-ip> and <dns1-ip> to kernel-parameter 'ip='. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Tested-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21 16:31:19 +08:00
unsigned int i;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
/* Initialise all name servers and NTP servers to NONE (but only if the
* "ip=" or "nfsaddrs=" kernel command line parameters weren't decoded,
* otherwise we'll overwrite the IP addresses specified there)
ipconfig: Correctly initialise ic_nameservers ic_nameservers, which stores the list of name servers discovered by ipconfig, is initialised (i.e. has all of its elements set to NONE, or 0xffffffff) by ic_nameservers_predef() in the following scenarios: - before the "ip=" and "nfsaddrs=" kernel command line parameters are parsed (in ip_auto_config_setup()); - before autoconfiguring via DHCP or BOOTP (in ic_bootp_init()), in order to clear any values that may have been set after parsing "ip=" or "nfsaddrs=" and are no longer needed. This means that ic_nameservers_predef() is not called when neither "ip=" nor "nfsaddrs=" is specified on the kernel command line. In this scenario, every element in ic_nameservers remains set to 0x00000000, which is indistinguishable from ANY and causes pnp_seq_show() to write the following (bogus) information to /proc/net/pnp: #MANUAL nameserver 0.0.0.0 nameserver 0.0.0.0 nameserver 0.0.0.0 This is potentially problematic for systems that blindly link /etc/resolv.conf to /proc/net/pnp. Ensure that ic_nameservers is also initialised when neither "ip=" nor "nfsaddrs=" are specified by calling ic_nameservers_predef() in ip_auto_config(), but only when ip_auto_config_setup() was not called earlier. This causes the following to be written to /proc/net/pnp, and is consistent with what gets written when ipconfig is configured manually but no name servers are specified on the kernel command line: #MANUAL Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:37 +08:00
*/
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
if (ic_set_manually == 0) {
ipconfig: Correctly initialise ic_nameservers ic_nameservers, which stores the list of name servers discovered by ipconfig, is initialised (i.e. has all of its elements set to NONE, or 0xffffffff) by ic_nameservers_predef() in the following scenarios: - before the "ip=" and "nfsaddrs=" kernel command line parameters are parsed (in ip_auto_config_setup()); - before autoconfiguring via DHCP or BOOTP (in ic_bootp_init()), in order to clear any values that may have been set after parsing "ip=" or "nfsaddrs=" and are no longer needed. This means that ic_nameservers_predef() is not called when neither "ip=" nor "nfsaddrs=" is specified on the kernel command line. In this scenario, every element in ic_nameservers remains set to 0x00000000, which is indistinguishable from ANY and causes pnp_seq_show() to write the following (bogus) information to /proc/net/pnp: #MANUAL nameserver 0.0.0.0 nameserver 0.0.0.0 nameserver 0.0.0.0 This is potentially problematic for systems that blindly link /etc/resolv.conf to /proc/net/pnp. Ensure that ic_nameservers is also initialised when neither "ip=" nor "nfsaddrs=" are specified by calling ic_nameservers_predef() in ip_auto_config(), but only when ip_auto_config_setup() was not called earlier. This causes the following to be written to /proc/net/pnp, and is consistent with what gets written when ipconfig is configured manually but no name servers are specified on the kernel command line: #MANUAL Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:37 +08:00
ic_nameservers_predef();
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
ic_ntp_servers_predef();
}
ipconfig: Correctly initialise ic_nameservers ic_nameservers, which stores the list of name servers discovered by ipconfig, is initialised (i.e. has all of its elements set to NONE, or 0xffffffff) by ic_nameservers_predef() in the following scenarios: - before the "ip=" and "nfsaddrs=" kernel command line parameters are parsed (in ip_auto_config_setup()); - before autoconfiguring via DHCP or BOOTP (in ic_bootp_init()), in order to clear any values that may have been set after parsing "ip=" or "nfsaddrs=" and are no longer needed. This means that ic_nameservers_predef() is not called when neither "ip=" nor "nfsaddrs=" is specified on the kernel command line. In this scenario, every element in ic_nameservers remains set to 0x00000000, which is indistinguishable from ANY and causes pnp_seq_show() to write the following (bogus) information to /proc/net/pnp: #MANUAL nameserver 0.0.0.0 nameserver 0.0.0.0 nameserver 0.0.0.0 This is potentially problematic for systems that blindly link /etc/resolv.conf to /proc/net/pnp. Ensure that ic_nameservers is also initialised when neither "ip=" nor "nfsaddrs=" are specified by calling ic_nameservers_predef() in ip_auto_config(), but only when ip_auto_config_setup() was not called earlier. This causes the following to be written to /proc/net/pnp, and is consistent with what gets written when ipconfig is configured manually but no name servers are specified on the kernel command line: #MANUAL Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:37 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef CONFIG_PROC_FS
proc: introduce proc_create_single{,_data} Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-15 21:57:23 +08:00
proc_create_single("pnp", 0444, init_net.proc_net, pnp_seq_show);
ipconfig: Create /proc/net/ipconfig directory To allow ipconfig to report IP configuration details to user space processes without cluttering /proc/net, create a new subdirectory /proc/net/ipconfig. All files containing IP configuration details should be written to this directory. Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:38 +08:00
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
if (ipconfig_proc_net_init() == 0)
ipconfig_proc_net_create("ntp_servers", &ntp_servers_seq_fops);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif /* CONFIG_PROC_FS */
if (!ic_enable)
return 0;
net ipv4: use preferred log methods Replace printk calls with preferred unconditional log method calls to keep kernel messages clean. Added newline to "too small MTU" message. Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-13 18:40:34 +08:00
pr_debug("IP-Config: Entered.\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef IPCONFIG_DYNAMIC
try_try_again:
#endif
ipconfig: Handle devices which take some time to come up. Some network devices, particularly USB ones, take several seconds to fully init and appear in the device list. If the user turned ipconfig on, they are using it for NFS root or some other early booting purpose. So it makes no sense to just flat out fail immediately if the device isn't found. It also doesn't make sense to just jack up the initial wait to something crazy like 10 seconds. Instead, poll immediately, and then periodically once a second, waiting for a usable device to appear. Fail after 12 seconds. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Christian Pellegrin <chripell@fsfe.org>
2010-03-12 16:00:17 +08:00
/* Wait for devices to appear */
err = wait_for_devices();
if (err)
return err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Setup all network devices */
ipconfig: Handle devices which take some time to come up. Some network devices, particularly USB ones, take several seconds to fully init and appear in the device list. If the user turned ipconfig on, they are using it for NFS root or some other early booting purpose. So it makes no sense to just flat out fail immediately if the device isn't found. It also doesn't make sense to just jack up the initial wait to something crazy like 10 seconds. Instead, poll immediately, and then periodically once a second, waiting for a usable device to appear. Fail after 12 seconds. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Christian Pellegrin <chripell@fsfe.org>
2010-03-12 16:00:17 +08:00
err = ic_open_devs();
if (err)
return err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Give drivers a chance to settle */
ipconfig wait for carrier v3 -> v4: fix return boolean false instead of 0 for ic_is_init_dev Currently the ip auto configuration has a hardcoded delay of 1 second. When (ethernet) link takes longer to come up (e.g. more than 3 seconds), nfs root may not be found. Remove the hardcoded delay, and wait for carrier on at least one network device. Signed-off-by: Micha Nelissen <micha@neli.hopto.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19 18:14:06 +08:00
msleep(CONF_POST_OPEN);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* If the config information is insufficient (e.g., our IP address or
* IP address of the boot server is missing or we have multiple network
* interfaces and no default was set), use BOOTP or RARP to get the
* missing values.
*/
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
if (ic_myaddr == NONE ||
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef CONFIG_ROOT_NFS
net/ipv4: Move && and || to end of previous line On Sun, 2009-11-22 at 16:31 -0800, David Miller wrote: > It should be of the form: > if (x && > y) > > or: > if (x && y) > > Fix patches, rather than complaints, for existing cases where things > do not follow this pattern are certainly welcome. Also collapsed some multiple tabs to single space. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-24 02:41:23 +08:00
(root_server_addr == NONE &&
ic_servaddr == NONE &&
ROOT_DEV == Root_NFS) ||
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
ic_first_dev->next) {
#ifdef IPCONFIG_DYNAMIC
if (ic_dynamic() < 0) {
ic_close_devs();
/*
* I don't know why, but sometimes the
* eepro100 driver (at least) gets upset and
* doesn't work the first time it's opened.
* But then if you close it and reopen it, it
* works just fine. So we need to try that at
* least once before giving up.
*
* Also, if the root will be NFS-mounted, we
* have nowhere to go if DHCP fails. So we
* just have to keep trying forever.
*
* -- Chip
*/
#ifdef CONFIG_ROOT_NFS
if (ROOT_DEV == Root_NFS) {
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_err("IP-Config: Retrying forever (NFS root)...\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto try_try_again;
}
#endif
if (--retries) {
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_err("IP-Config: Reopening network devices...\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto try_try_again;
}
/* Oh, well. At least we tried. */
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_err("IP-Config: Auto-configuration of network failed\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -1;
}
#else /* !DYNAMIC */
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_err("IP-Config: Incomplete network configuration information\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ic_close_devs();
return -1;
#endif /* IPCONFIG_DYNAMIC */
} else {
/* Device selected manually or only one device -> use it */
net: ipconfig: Support using "delayed" DHCP replies The dhcp code only waits 1s between sending DHCP requests on different devices and only accepts an answer for the device that sent out the last request. Only the timeout at the end of a loop is increased iteratively which favours only the last device. This makes it impossible to work with a dhcp server that takes little more than 1s connected to a device that is not the last one. Instead of also increasing the inter-device timeout, teach the code to handle delayed replies. To accomplish that, make *ic_dev track the current ic_device instead of the current net_device and adapt all users accordingly. The relevant change then is to reset d to ic_dev on a reply to assert that the followup request goes through the right device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 17:30:38 +08:00
ic_dev = ic_first_dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
addr = root_nfs_parse_addr(root_server_path);
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
if (root_server_addr == NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
root_server_addr = addr;
/*
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 09:57:33 +08:00
* Use defaults wherever applicable.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
if (ic_defaults() < 0)
return -1;
/*
* Record which protocol was actually used.
*/
#ifdef IPCONFIG_DYNAMIC
ic_proto_used = ic_got_reply | (ic_proto_enabled & IC_USE_DHCP);
#endif
#ifndef IPCONFIG_SILENT
/*
* Clue in the operator.
*/
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_info("IP-Config: Complete:\n");
net/ipv4/ipconfig: add device address to a KERN_INFO message adds a "hwaddr" to the "IP-Config: Complete" KERN_INFO message with the dev_addr of the device selected for auto configuration. Signed-off-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25 09:15:43 +08:00
pr_info(" device=%s, hwaddr=%*phC, ipaddr=%pI4, mask=%pI4, gw=%pI4\n",
net: ipconfig: Support using "delayed" DHCP replies The dhcp code only waits 1s between sending DHCP requests on different devices and only accepts an answer for the device that sent out the last request. Only the timeout at the end of a loop is increased iteratively which favours only the last device. This makes it impossible to work with a dhcp server that takes little more than 1s connected to a device that is not the last one. Instead of also increasing the inter-device timeout, teach the code to handle delayed replies. To accomplish that, make *ic_dev track the current ic_device instead of the current net_device and adapt all users accordingly. The relevant change then is to reset d to ic_dev on a reply to assert that the followup request goes through the right device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 17:30:38 +08:00
ic_dev->dev->name, ic_dev->dev->addr_len, ic_dev->dev->dev_addr,
net/ipv4/ipconfig: add device address to a KERN_INFO message adds a "hwaddr" to the "IP-Config: Complete" KERN_INFO message with the dev_addr of the device selected for auto configuration. Signed-off-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25 09:15:43 +08:00
&ic_myaddr, &ic_netmask, &ic_gateway);
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_info(" host=%s, domain=%s, nis-domain=%s\n",
utsname()->nodename, ic_domain, utsname()->domainname);
pr_info(" bootserver=%pI4, rootserver=%pI4, rootpath=%s",
&ic_servaddr, &root_server_addr, root_server_path);
ipv4: teach ipconfig about the MTU option in DHCP The DHCP spec allows the server to specify the MTU. This can be useful for netbooting with UDP-based NFS-root on a network using jumbo frames. This patch allows the kernel IP autoconfiguration to handle this option correctly. It would be possible to use initramfs and add a script to set the MTU, but that seems like a complicated solution if no initramfs is otherwise necessary, and would bloat the kernel image more than this code would. This patch was originally submitted to LKML in 2003 by Hans-Peter Jansen. Signed-off-by: Chris Friesen <cfriesen@nortel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-20 06:31:50 +08:00
if (ic_dev_mtu)
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
pr_cont(", mtu=%d", ic_dev_mtu);
ipconfig: Tidy up reporting of name servers Commit 5e953778a2aab04929a5e7b69f53dc26e39b079e ("ipconfig: add nameserver IPs to kernel-parameter ip=") adds the IP addresses of discovered name servers to the summary printed by ipconfig when configuration is complete. It appears the intention in ip_auto_config() was to print the name servers on a new line (especially given the spacing and lack of comma before "nameserver0="), but they're actually printed on the same line as the NFS root filesystem configuration summary: [ 0.686186] IP-Config: Complete: [ 0.686226] device=eth0, hwaddr=xx:xx:xx:xx:xx:xx, ipaddr=10.0.0.2, mask=255.255.255.0, gw=10.0.0.1 [ 0.686328] host=test, domain=example.com, nis-domain=(none) [ 0.686386] bootserver=10.0.0.1, rootserver=10.0.0.1, rootpath= nameserver0=10.0.0.1 This makes it harder to read and parse ipconfig's output. Instead, print the name servers on a separate line: [ 0.791250] IP-Config: Complete: [ 0.791289] device=eth0, hwaddr=xx:xx:xx:xx:xx:xx, ipaddr=10.0.0.2, mask=255.255.255.0, gw=10.0.0.1 [ 0.791407] host=test, domain=example.com, nis-domain=(none) [ 0.791475] bootserver=10.0.0.1, rootserver=10.0.0.1, rootpath= [ 0.791476] nameserver0=10.0.0.1 Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:33 +08:00
/* Name servers (if any): */
for (i = 0; i < CONF_NAMESERVERS_MAX; i++) {
ipconfig: add nameserver IPs to kernel-parameter ip= On small systems (e.g. embedded ones) IP addresses are often configured by bootloaders and get assigned to kernel via parameter "ip=". If set to "ip=dhcp", even nameserver entries from DHCP daemons are handled. These entries exported in /proc/net/pnp are commonly linked by /etc/resolv.conf. To configure nameservers for networks without DHCP, this patch adds option <dns0-ip> and <dns1-ip> to kernel-parameter 'ip='. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Tested-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21 16:31:19 +08:00
if (ic_nameservers[i] != NONE) {
ipconfig: Tidy up reporting of name servers Commit 5e953778a2aab04929a5e7b69f53dc26e39b079e ("ipconfig: add nameserver IPs to kernel-parameter ip=") adds the IP addresses of discovered name servers to the summary printed by ipconfig when configuration is complete. It appears the intention in ip_auto_config() was to print the name servers on a new line (especially given the spacing and lack of comma before "nameserver0="), but they're actually printed on the same line as the NFS root filesystem configuration summary: [ 0.686186] IP-Config: Complete: [ 0.686226] device=eth0, hwaddr=xx:xx:xx:xx:xx:xx, ipaddr=10.0.0.2, mask=255.255.255.0, gw=10.0.0.1 [ 0.686328] host=test, domain=example.com, nis-domain=(none) [ 0.686386] bootserver=10.0.0.1, rootserver=10.0.0.1, rootpath= nameserver0=10.0.0.1 This makes it harder to read and parse ipconfig's output. Instead, print the name servers on a separate line: [ 0.791250] IP-Config: Complete: [ 0.791289] device=eth0, hwaddr=xx:xx:xx:xx:xx:xx, ipaddr=10.0.0.2, mask=255.255.255.0, gw=10.0.0.1 [ 0.791407] host=test, domain=example.com, nis-domain=(none) [ 0.791475] bootserver=10.0.0.1, rootserver=10.0.0.1, rootpath= [ 0.791476] nameserver0=10.0.0.1 Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:33 +08:00
if (i == 0)
pr_info(" nameserver%u=%pI4",
i, &ic_nameservers[i]);
else
pr_cont(", nameserver%u=%pI4",
i, &ic_nameservers[i]);
ipconfig: add nameserver IPs to kernel-parameter ip= On small systems (e.g. embedded ones) IP addresses are often configured by bootloaders and get assigned to kernel via parameter "ip=". If set to "ip=dhcp", even nameserver entries from DHCP daemons are handled. These entries exported in /proc/net/pnp are commonly linked by /etc/resolv.conf. To configure nameservers for networks without DHCP, this patch adds option <dns0-ip> and <dns1-ip> to kernel-parameter 'ip='. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Tested-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21 16:31:19 +08:00
}
ipconfig: Tidy up reporting of name servers Commit 5e953778a2aab04929a5e7b69f53dc26e39b079e ("ipconfig: add nameserver IPs to kernel-parameter ip=") adds the IP addresses of discovered name servers to the summary printed by ipconfig when configuration is complete. It appears the intention in ip_auto_config() was to print the name servers on a new line (especially given the spacing and lack of comma before "nameserver0="), but they're actually printed on the same line as the NFS root filesystem configuration summary: [ 0.686186] IP-Config: Complete: [ 0.686226] device=eth0, hwaddr=xx:xx:xx:xx:xx:xx, ipaddr=10.0.0.2, mask=255.255.255.0, gw=10.0.0.1 [ 0.686328] host=test, domain=example.com, nis-domain=(none) [ 0.686386] bootserver=10.0.0.1, rootserver=10.0.0.1, rootpath= nameserver0=10.0.0.1 This makes it harder to read and parse ipconfig's output. Instead, print the name servers on a separate line: [ 0.791250] IP-Config: Complete: [ 0.791289] device=eth0, hwaddr=xx:xx:xx:xx:xx:xx, ipaddr=10.0.0.2, mask=255.255.255.0, gw=10.0.0.1 [ 0.791407] host=test, domain=example.com, nis-domain=(none) [ 0.791475] bootserver=10.0.0.1, rootserver=10.0.0.1, rootpath= [ 0.791476] nameserver0=10.0.0.1 Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:33 +08:00
if (i + 1 == CONF_NAMESERVERS_MAX)
pr_cont("\n");
}
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
/* NTP servers (if any): */
for (i = 0; i < CONF_NTP_SERVERS_MAX; i++) {
if (ic_ntp_servers[i] != NONE) {
if (i == 0)
pr_info(" ntpserver%u=%pI4",
i, &ic_ntp_servers[i]);
else
pr_cont(", ntpserver%u=%pI4",
i, &ic_ntp_servers[i]);
}
if (i + 1 == CONF_NTP_SERVERS_MAX)
pr_cont("\n");
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif /* !SILENT */
net: ipconfig: fix use after free ic_close_devs() calls kfree() for all devices's ic_device. Since commit 2647cffb2bc6 ("net: ipconfig: Support using "delayed" DHCP replies") the active device's ic_device is still used however to print the ipconfig summary which results in an oops if the memory is already changed. So delay freeing until after the autoconfig results are reported. Fixes: 2647cffb2bc6 ("net: ipconfig: Support using "delayed" DHCP replies") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10 17:44:17 +08:00
/*
* Close all network devices except the device we've
* autoconfigured and set up routes.
*/
if (ic_setup_if() < 0 || ic_setup_routes() < 0)
net: ipconfig: Fix more use after free While commit 9c706a49d660 ("net: ipconfig: fix use after free") avoids the use after free, the resulting code still ends up calling both the ic_setup_if() and ic_setup_routes() after calling ic_close_devs(), and access to the device is still required. Move the call to ic_close_devs() to the very end of the function. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-16 22:45:38 +08:00
err = -1;
else
err = 0;
net: ipconfig: fix use after free ic_close_devs() calls kfree() for all devices's ic_device. Since commit 2647cffb2bc6 ("net: ipconfig: Support using "delayed" DHCP replies") the active device's ic_device is still used however to print the ipconfig summary which results in an oops if the memory is already changed. So delay freeing until after the autoconfig results are reported. Fixes: 2647cffb2bc6 ("net: ipconfig: Support using "delayed" DHCP replies") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10 17:44:17 +08:00
net: ipconfig: Fix more use after free While commit 9c706a49d660 ("net: ipconfig: fix use after free") avoids the use after free, the resulting code still ends up calling both the ic_setup_if() and ic_setup_routes() after calling ic_close_devs(), and access to the device is still required. Move the call to ic_close_devs() to the very end of the function. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-16 22:45:38 +08:00
ic_close_devs();
net: ipconfig: fix use after free ic_close_devs() calls kfree() for all devices's ic_device. Since commit 2647cffb2bc6 ("net: ipconfig: Support using "delayed" DHCP replies") the active device's ic_device is still used however to print the ipconfig summary which results in an oops if the memory is already changed. So delay freeing until after the autoconfig results are reported. Fixes: 2647cffb2bc6 ("net: ipconfig: Support using "delayed" DHCP replies") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10 17:44:17 +08:00
net: ipconfig: Fix more use after free While commit 9c706a49d660 ("net: ipconfig: fix use after free") avoids the use after free, the resulting code still ends up calling both the ic_setup_if() and ic_setup_routes() after calling ic_close_devs(), and access to the device is still required. Move the call to ic_close_devs() to the very end of the function. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-16 22:45:38 +08:00
return err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
late_initcall(ip_auto_config);
/*
* Decode any IP configuration options in the "ip=" or "nfsaddrs=" kernel
nfs: new subdir Documentation/filesystems/nfs We're adding enough nfs documentation that it may as well have its own subdirectory. Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-10-28 02:41:35 +08:00
* command line parameter. See Documentation/filesystems/nfs/nfsroot.txt.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
static int __init ic_proto_name(char *name)
{
if (!strcmp(name, "on") || !strcmp(name, "any")) {
return 1;
}
[IPV4]: Fix ip command line processing. Recently the documentation in Documentation/nfsroot.txt was update to note that in fact ip=off and ip=::::::off as the latter is ignored and the default (on) is used. This was certainly a step in the direction of reducing confusion. But it seems to me that the code ought to be fixed up so that ip=::::::off actually turns off ip autoconfiguration. This patch also notes more specifically that ip=on (aka ip=::::::on) is the default. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-26 12:54:42 +08:00
if (!strcmp(name, "off") || !strcmp(name, "none")) {
[IPV4] ipconfig: Fix regression in ip command line processing The recent changes for ip command line processing fixed some problems but unfortunately broke some common usage scenarios. In current 2.6.24-rc6 the following command line results in no IP address assignment, which is surely a regression: ip=10.0.2.15::10.0.2.2:255.255.255.0::eth0:off Please find below a patch that works for all cases I can find. Signed-off-by: Amos Waterland <apw@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-06 15:23:06 +08:00
return 0;
[IPV4]: Fix ip command line processing. Recently the documentation in Documentation/nfsroot.txt was update to note that in fact ip=off and ip=::::::off as the latter is ignored and the default (on) is used. This was certainly a step in the direction of reducing confusion. But it seems to me that the code ought to be fixed up so that ip=::::::off actually turns off ip autoconfiguration. This patch also notes more specifically that ip=on (aka ip=::::::on) is the default. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-26 12:54:42 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef CONFIG_IP_PNP_DHCP
ipconfig: send Client-identifier in DHCP requests A dhcp server may provide parameters to a client from a pool of IP addresses and using a shared rootfs, or provide a specific set of parameters for a specific client, usually using the MAC address to identify each client individually. The dhcp protocol also specifies a client-id field which can be used to determine the correct parameters to supply when no MAC address is available. There is currently no way to tell the kernel to supply a specific client-id, only the userspace dhcp clients support this feature, but this can not be used when the network is needed before userspace is available such as when the root filesystem is on NFS. This patch is to be able to do something like "ip=dhcp,client_id_type, client_id_value", as a kernel parameter to enable the kernel to identify itself to the server. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 16:54:36 +08:00
else if (!strncmp(name, "dhcp", 4)) {
char *client_id;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ic_proto_enabled &= ~IC_RARP;
ipconfig: send Client-identifier in DHCP requests A dhcp server may provide parameters to a client from a pool of IP addresses and using a shared rootfs, or provide a specific set of parameters for a specific client, usually using the MAC address to identify each client individually. The dhcp protocol also specifies a client-id field which can be used to determine the correct parameters to supply when no MAC address is available. There is currently no way to tell the kernel to supply a specific client-id, only the userspace dhcp clients support this feature, but this can not be used when the network is needed before userspace is available such as when the root filesystem is on NFS. This patch is to be able to do something like "ip=dhcp,client_id_type, client_id_value", as a kernel parameter to enable the kernel to identify itself to the server. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 16:54:36 +08:00
client_id = strstr(name, "dhcp,");
if (client_id) {
char *v;
client_id = client_id + 5;
v = strchr(client_id, ',');
if (!v)
return 1;
*v = 0;
if (kstrtou8(client_id, 0, dhcp_client_identifier))
net ipv4: use preferred log methods Replace printk calls with preferred unconditional log method calls to keep kernel messages clean. Added newline to "too small MTU" message. Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-13 18:40:34 +08:00
pr_debug("DHCP: Invalid client identifier type\n");
ipconfig: send Client-identifier in DHCP requests A dhcp server may provide parameters to a client from a pool of IP addresses and using a shared rootfs, or provide a specific set of parameters for a specific client, usually using the MAC address to identify each client individually. The dhcp protocol also specifies a client-id field which can be used to determine the correct parameters to supply when no MAC address is available. There is currently no way to tell the kernel to supply a specific client-id, only the userspace dhcp clients support this feature, but this can not be used when the network is needed before userspace is available such as when the root filesystem is on NFS. This patch is to be able to do something like "ip=dhcp,client_id_type, client_id_value", as a kernel parameter to enable the kernel to identify itself to the server. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 16:54:36 +08:00
strncpy(dhcp_client_identifier + 1, v + 1, 251);
*v = ',';
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 1;
}
#endif
#ifdef CONFIG_IP_PNP_BOOTP
else if (!strcmp(name, "bootp")) {
ic_proto_enabled &= ~(IC_RARP | IC_USE_DHCP);
return 1;
}
#endif
#ifdef CONFIG_IP_PNP_RARP
else if (!strcmp(name, "rarp")) {
ic_proto_enabled &= ~(IC_BOOTP | IC_USE_DHCP);
return 1;
}
#endif
#ifdef IPCONFIG_DYNAMIC
else if (!strcmp(name, "both")) {
ic_proto_enabled &= ~IC_USE_DHCP; /* backward compat :-( */
return 1;
}
#endif
return 0;
}
static int __init ip_auto_config_setup(char *addrs)
{
char *cp, *ip, *dp;
int num = 0;
ic_set_manually = 1;
[IPV4] Fix ip=dhcp regression David Brownell pointed out a regression in my recent "Fix ip command line processing" patch. It turns out to be a fairly blatant oversight on my part whereby ic_enable is never set, and thus autoconfiguration is never enabled. Clearly my testing was broken :-( The solution that I have is to set ic_enable to 1 if we hit ip_auto_config_setup(), which basically means that autoconfiguration is activated unless told otherwise. I then flip ic_enable to 0 if ip=off, ip=none, ip=::::::off or ip=::::::none using ic_proto_name(); The incremental patch is below, let me know if a non-incremental version is prepared, as I did as for the original patch to be reverted pending a fix. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-28 13:19:10 +08:00
ic_enable = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[IPV4] ipconfig: Fix regression in ip command line processing The recent changes for ip command line processing fixed some problems but unfortunately broke some common usage scenarios. In current 2.6.24-rc6 the following command line results in no IP address assignment, which is surely a regression: ip=10.0.2.15::10.0.2.2:255.255.255.0::eth0:off Please find below a patch that works for all cases I can find. Signed-off-by: Amos Waterland <apw@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-06 15:23:06 +08:00
/*
* If any dhcp, bootp etc options are set, leave autoconfig on
* and skip the below static IP processing.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (ic_proto_name(addrs))
return 1;
[IPV4] ipconfig: Fix regression in ip command line processing The recent changes for ip command line processing fixed some problems but unfortunately broke some common usage scenarios. In current 2.6.24-rc6 the following command line results in no IP address assignment, which is surely a regression: ip=10.0.2.15::10.0.2.2:255.255.255.0::eth0:off Please find below a patch that works for all cases I can find. Signed-off-by: Amos Waterland <apw@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-06 15:23:06 +08:00
/* If no static IP is given, turn off autoconfig and bail. */
if (*addrs == 0 ||
strcmp(addrs, "off") == 0 ||
strcmp(addrs, "none") == 0) {
ic_enable = 0;
return 1;
}
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
/* Initialise all name servers and NTP servers to NONE */
ipconfig: add nameserver IPs to kernel-parameter ip= On small systems (e.g. embedded ones) IP addresses are often configured by bootloaders and get assigned to kernel via parameter "ip=". If set to "ip=dhcp", even nameserver entries from DHCP daemons are handled. These entries exported in /proc/net/pnp are commonly linked by /etc/resolv.conf. To configure nameservers for networks without DHCP, this patch adds option <dns0-ip> and <dns1-ip> to kernel-parameter 'ip='. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Tested-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21 16:31:19 +08:00
ic_nameservers_predef();
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
ic_ntp_servers_predef();
ipconfig: add nameserver IPs to kernel-parameter ip= On small systems (e.g. embedded ones) IP addresses are often configured by bootloaders and get assigned to kernel via parameter "ip=". If set to "ip=dhcp", even nameserver entries from DHCP daemons are handled. These entries exported in /proc/net/pnp are commonly linked by /etc/resolv.conf. To configure nameservers for networks without DHCP, this patch adds option <dns0-ip> and <dns1-ip> to kernel-parameter 'ip='. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Tested-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21 16:31:19 +08:00
[IPV4] ipconfig: Fix regression in ip command line processing The recent changes for ip command line processing fixed some problems but unfortunately broke some common usage scenarios. In current 2.6.24-rc6 the following command line results in no IP address assignment, which is surely a regression: ip=10.0.2.15::10.0.2.2:255.255.255.0::eth0:off Please find below a patch that works for all cases I can find. Signed-off-by: Amos Waterland <apw@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-06 15:23:06 +08:00
/* Parse string for static IP assignment. */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ip = addrs;
while (ip && *ip) {
if ((cp = strchr(ip, ':')))
*cp++ = '\0';
if (strlen(ip) > 0) {
net ipv4: use preferred log methods Replace printk calls with preferred unconditional log method calls to keep kernel messages clean. Added newline to "too small MTU" message. Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-13 18:40:34 +08:00
pr_debug("IP-Config: Parameter #%d: `%s'\n", num, ip);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
switch (num) {
case 0:
[NET] endianness noise: INADDR_ANY Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-18 13:44:53 +08:00
if ((ic_myaddr = in_aton(ip)) == ANY)
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
ic_myaddr = NONE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case 1:
[NET] endianness noise: INADDR_ANY Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-18 13:44:53 +08:00
if ((ic_servaddr = in_aton(ip)) == ANY)
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
ic_servaddr = NONE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case 2:
[NET] endianness noise: INADDR_ANY Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-18 13:44:53 +08:00
if ((ic_gateway = in_aton(ip)) == ANY)
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
ic_gateway = NONE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case 3:
[NET] endianness noise: INADDR_ANY Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-18 13:44:53 +08:00
if ((ic_netmask = in_aton(ip)) == ANY)
[NET]: ipconfig and nfsroot annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-08 16:19:38 +08:00
ic_netmask = NONE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case 4:
if ((dp = strchr(ip, '.'))) {
*dp++ = '\0';
[PATCH] namespaces: utsname: switch to using uts namespaces Replace references to system_utsname to the per-process uts namespace where appropriate. This includes things like uname. Changes: Per Eric Biederman's comments, use the per-process uts namespace for ELF_PLATFORM, sunrpc, and parts of net/ipv4/ipconfig.c [jdike@addtoit.com: UML fix] [clg@fr.ibm.com: cleanup] [akpm@osdl.org: build fix] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Andrey Savochkin <saw@sw.ru> Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 17:18:11 +08:00
strlcpy(utsname()->domainname, dp,
sizeof(utsname()->domainname));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[PATCH] namespaces: utsname: switch to using uts namespaces Replace references to system_utsname to the per-process uts namespace where appropriate. This includes things like uname. Changes: Per Eric Biederman's comments, use the per-process uts namespace for ELF_PLATFORM, sunrpc, and parts of net/ipv4/ipconfig.c [jdike@addtoit.com: UML fix] [clg@fr.ibm.com: cleanup] [akpm@osdl.org: build fix] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Andrey Savochkin <saw@sw.ru> Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 17:18:11 +08:00
strlcpy(utsname()->nodename, ip,
sizeof(utsname()->nodename));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ic_host_name_set = 1;
break;
case 5:
strlcpy(user_dev_name, ip, sizeof(user_dev_name));
break;
case 6:
[IPV4] ipconfig: Fix regression in ip command line processing The recent changes for ip command line processing fixed some problems but unfortunately broke some common usage scenarios. In current 2.6.24-rc6 the following command line results in no IP address assignment, which is surely a regression: ip=10.0.2.15::10.0.2.2:255.255.255.0::eth0:off Please find below a patch that works for all cases I can find. Signed-off-by: Amos Waterland <apw@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-06 15:23:06 +08:00
if (ic_proto_name(ip) == 0 &&
ic_myaddr == NONE) {
ic_enable = 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
ipconfig: add nameserver IPs to kernel-parameter ip= On small systems (e.g. embedded ones) IP addresses are often configured by bootloaders and get assigned to kernel via parameter "ip=". If set to "ip=dhcp", even nameserver entries from DHCP daemons are handled. These entries exported in /proc/net/pnp are commonly linked by /etc/resolv.conf. To configure nameservers for networks without DHCP, this patch adds option <dns0-ip> and <dns1-ip> to kernel-parameter 'ip='. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Tested-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21 16:31:19 +08:00
case 7:
if (CONF_NAMESERVERS_MAX >= 1) {
ic_nameservers[0] = in_aton(ip);
if (ic_nameservers[0] == ANY)
ic_nameservers[0] = NONE;
}
break;
case 8:
if (CONF_NAMESERVERS_MAX >= 2) {
ic_nameservers[1] = in_aton(ip);
if (ic_nameservers[1] == ANY)
ic_nameservers[1] = NONE;
}
break;
ipconfig: Write NTP server IPs to /proc/net/ipconfig/ntp_servers Distributed filesystems are most effective when the server and client clocks are synchronised. Embedded devices often use NFS for their root filesystem but typically do not contain an RTC, so the clocks of the NFS server and the embedded device will be out-of-sync when the root filesystem is mounted (and may not be synchronised until late in the boot process). Extend ipconfig with the ability to export IP addresses of NTP servers it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as follows: - If ipconfig is configured manually via the "ip=" or "nfsaddrs=" kernel command line parameters, one NTP server can be specified in the new "<ntp0-ip>" parameter. - If ipconfig is autoconfigured via DHCP, request DHCP option 42 in the DHCPDISCOVER message, and record the IP addresses of up to three NTP servers sent by the responding DHCP server in the subsequent DHCPOFFER message. ipconfig will only write the NTP server IP addresses it discovers to /proc/net/ipconfig/ntp_servers, one per line (in the order received from the DHCP server, if DHCP autoconfiguration is used); making use of these NTP servers is the responsibility of a user space process (e.g. an initrd/initram script that invokes an NTP client before mounting an NFS root filesystem). Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24 10:56:39 +08:00
case 9:
if (CONF_NTP_SERVERS_MAX >= 1) {
ic_ntp_servers[0] = in_aton(ip);
if (ic_ntp_servers[0] == ANY)
ic_ntp_servers[0] = NONE;
}
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
ip = cp;
num++;
}
return 1;
}
net/ipv4/ipconfig: neaten __setup placement The __setup macro should follow the corresponding setup handler. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19 22:04:39 +08:00
__setup("ip=", ip_auto_config_setup);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int __init nfsaddrs_config_setup(char *addrs)
{
return ip_auto_config_setup(addrs);
}
net/ipv4/ipconfig: neaten __setup placement The __setup macro should follow the corresponding setup handler. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19 22:04:39 +08:00
__setup("nfsaddrs=", nfsaddrs_config_setup);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[IPV4] ipconfig: Implement DHCP Class-identifier From : Rainer Jochem <rainer.jochem@mpi-sb.mpg.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 18:18:39 +08:00
static int __init vendor_class_identifier_setup(char *addrs)
{
if (strlcpy(vendor_class_identifier, addrs,
sizeof(vendor_class_identifier))
>= sizeof(vendor_class_identifier))
net ipv4: use preferred log methods Replace printk calls with preferred unconditional log method calls to keep kernel messages clean. Added newline to "too small MTU" message. Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-13 18:40:34 +08:00
pr_warn("DHCP: vendorclass too long, truncated to \"%s\"\n",
net: Convert printks to pr_<level> Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 02:36:11 +08:00
vendor_class_identifier);
[IPV4] ipconfig: Implement DHCP Class-identifier From : Rainer Jochem <rainer.jochem@mpi-sb.mpg.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 18:18:39 +08:00
return 1;
}
__setup("dhcpclass=", vendor_class_identifier_setup);
ipconfig: add carrier_timeout kernel parameter commit 3fb72f1e6e61 ("ipconfig wait for carrier") added a "wait for carrier" policy, with a fixed worst case maximum wait of two minutes. Now make the wait for carrier timeout configurable on the kernel commandline and use the 120s as the default. The timeout messages introduced with commit 5e404cd65860 ("ipconfig: add informative timeout messages while waiting for carrier") are done in a fixed interval of 20 seconds, just like they were before (240/12). Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-31 18:14:18 +08:00
static int __init set_carrier_timeout(char *str)
{
ssize_t ret;
if (!str)
return 0;
ret = kstrtouint(str, 0, &carrier_timeout);
if (ret)
return 0;
return 1;
}
__setup("carrier_timeout=", set_carrier_timeout);