linux/arch/powerpc/platforms/pasemi/iommu.c

273 lines
7.2 KiB
C
Raw Normal View History

/*
* Copyright (C) 2005-2008, PA Semi, Inc
*
* Maintained by: Olof Johansson <olof@lixom.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#undef DEBUG
#include <linux/memblock.h>
#include <linux/types.h>
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <asm/iommu.h>
#include <asm/machdep.h>
#include <asm/firmware.h>
#include "pasemi.h"
#define IOBMAP_PAGE_SHIFT 12
#define IOBMAP_PAGE_SIZE (1 << IOBMAP_PAGE_SHIFT)
#define IOBMAP_PAGE_MASK (IOBMAP_PAGE_SIZE - 1)
#define IOB_BASE 0xe0000000
#define IOB_SIZE 0x3000
/* Configuration registers */
#define IOBCAP_REG 0x40
#define IOBCOM_REG 0x100
/* Enable IOB address translation */
#define IOBCOM_ATEN 0x00000100
/* Address decode configuration register */
#define IOB_AD_REG 0x14c
/* IOBCOM_AD_REG fields */
#define IOB_AD_VGPRT 0x00000e00
#define IOB_AD_VGAEN 0x00000100
/* Direct mapping settings */
#define IOB_AD_MPSEL_MASK 0x00000030
#define IOB_AD_MPSEL_B38 0x00000000
#define IOB_AD_MPSEL_B40 0x00000010
#define IOB_AD_MPSEL_B42 0x00000020
/* Translation window size / enable */
#define IOB_AD_TRNG_MASK 0x00000003
#define IOB_AD_TRNG_256M 0x00000000
#define IOB_AD_TRNG_2G 0x00000001
#define IOB_AD_TRNG_128G 0x00000003
#define IOB_TABLEBASE_REG 0x154
/* Base of the 64 4-byte L1 registers */
#define IOB_XLT_L1_REGBASE 0x2b00
/* Register to invalidate TLB entries */
#define IOB_AT_INVAL_TLB_REG 0x2d00
/* The top two bits of the level 1 entry contains valid and type flags */
#define IOBMAP_L1E_V 0x40000000
#define IOBMAP_L1E_V_B 0x80000000
/* For big page entries, the bottom two bits contains flags */
#define IOBMAP_L1E_BIG_CACHED 0x00000002
#define IOBMAP_L1E_BIG_PRIORITY 0x00000001
/* For regular level 2 entries, top 2 bits contain valid and cache flags */
#define IOBMAP_L2E_V 0x80000000
#define IOBMAP_L2E_V_CACHED 0xc0000000
static void __iomem *iob;
static u32 iob_l1_emptyval;
static u32 iob_l2_emptyval;
static u32 *iob_l2_base;
static struct iommu_table iommu_table_iobmap;
static int iommu_table_iobmap_inited;
static int iobmap_build(struct iommu_table *tbl, long index,
long npages, unsigned long uaddr,
enum dma_data_direction direction,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 04:46:00 +08:00
unsigned long attrs)
{
u32 *ip;
u32 rpn;
unsigned long bus_addr;
pr_debug("iobmap: build at: %lx, %lx, addr: %lx\n", index, npages, uaddr);
bus_addr = (tbl->it_offset + index) << IOBMAP_PAGE_SHIFT;
ip = ((u32 *)tbl->it_base) + index;
while (npages--) {
rpn = __pa(uaddr) >> IOBMAP_PAGE_SHIFT;
*(ip++) = IOBMAP_L2E_V | rpn;
/* invalidate tlb, can be optimized more */
out_le32(iob+IOB_AT_INVAL_TLB_REG, bus_addr >> 14);
uaddr += IOBMAP_PAGE_SIZE;
bus_addr += IOBMAP_PAGE_SIZE;
}
return 0;
}
static void iobmap_free(struct iommu_table *tbl, long index,
long npages)
{
u32 *ip;
unsigned long bus_addr;
pr_debug("iobmap: free at: %lx, %lx\n", index, npages);
bus_addr = (tbl->it_offset + index) << IOBMAP_PAGE_SHIFT;
ip = ((u32 *)tbl->it_base) + index;
while (npages--) {
*(ip++) = iob_l2_emptyval;
/* invalidate tlb, can be optimized more */
out_le32(iob+IOB_AT_INVAL_TLB_REG, bus_addr >> 14);
bus_addr += IOBMAP_PAGE_SIZE;
}
}
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
static struct iommu_table_ops iommu_table_iobmap_ops = {
.set = iobmap_build,
.clear = iobmap_free
};
static void iommu_table_iobmap_setup(void)
{
pr_debug(" -> %s\n", __func__);
iommu_table_iobmap.it_busno = 0;
iommu_table_iobmap.it_offset = 0;
iommu_table_iobmap.it_page_shift = IOBMAP_PAGE_SHIFT;
/* it_size is in number of entries */
iommu_table_iobmap.it_size =
0x80000000 >> iommu_table_iobmap.it_page_shift;
/* Initialize the common IOMMU code */
iommu_table_iobmap.it_base = (unsigned long)iob_l2_base;
iommu_table_iobmap.it_index = 0;
/* XXXOJN tune this to avoid IOB cache invals.
* Should probably be 8 (64 bytes)
*/
iommu_table_iobmap.it_blocksize = 4;
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
iommu_table_iobmap.it_ops = &iommu_table_iobmap_ops;
iommu_init_table(&iommu_table_iobmap, 0);
pr_debug(" <- %s\n", __func__);
}
static void pci_dma_bus_setup_pasemi(struct pci_bus *bus)
{
pr_debug("pci_dma_bus_setup, bus %p, bus->self %p\n", bus, bus->self);
if (!iommu_table_iobmap_inited) {
iommu_table_iobmap_inited = 1;
iommu_table_iobmap_setup();
}
}
static void pci_dma_dev_setup_pasemi(struct pci_dev *dev)
{
pr_debug("pci_dma_dev_setup, dev %p (%s)\n", dev, pci_name(dev));
#if !defined(CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE)
/* For non-LPAR environment, don't translate anything for the DMA
* engine. The exception to this is if the user has enabled
* CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE at build time.
*/
if (dev->vendor == 0x1959 && dev->device == 0xa007 &&
!firmware_has_feature(FW_FEATURE_LPAR)) {
dev->dev.dma_ops = &dma_direct_ops;
/*
* Set the coherent DMA mask to prevent the iommu
* being used unnecessarily
*/
dev->dev.coherent_dma_mask = DMA_BIT_MASK(44);
return;
}
#endif
set_iommu_table_base(&dev->dev, &iommu_table_iobmap);
}
static int __init iob_init(struct device_node *dn)
{
unsigned long tmp;
u32 regword;
int i;
pr_debug(" -> %s\n", __func__);
/* For 2G space, 8x64 pages (2^21 bytes) is max total l2 size */
iob_l2_base = (u32 *)__va(memblock_alloc_base(1UL<<21, 1UL<<21, 0x80000000));
printk(KERN_INFO "IOBMAP L2 allocated at: %p\n", iob_l2_base);
/* Allocate a spare page to map all invalid IOTLB pages. */
tmp = memblock_alloc(IOBMAP_PAGE_SIZE, IOBMAP_PAGE_SIZE);
if (!tmp)
panic("IOBMAP: Cannot allocate spare page!");
/* Empty l1 is marked invalid */
iob_l1_emptyval = 0;
/* Empty l2 is mapped to dummy page */
iob_l2_emptyval = IOBMAP_L2E_V | (tmp >> IOBMAP_PAGE_SHIFT);
iob = ioremap(IOB_BASE, IOB_SIZE);
if (!iob)
panic("IOBMAP: Cannot map registers!");
/* setup direct mapping of the L1 entries */
for (i = 0; i < 64; i++) {
/* Each L1 covers 32MB, i.e. 8K entries = 32K of ram */
regword = IOBMAP_L1E_V | (__pa(iob_l2_base + i*0x2000) >> 12);
out_le32(iob+IOB_XLT_L1_REGBASE+i*4, regword);
}
/* set 2GB translation window, based at 0 */
regword = in_le32(iob+IOB_AD_REG);
regword &= ~IOB_AD_TRNG_MASK;
regword |= IOB_AD_TRNG_2G;
out_le32(iob+IOB_AD_REG, regword);
/* Enable translation */
regword = in_le32(iob+IOBCOM_REG);
regword |= IOBCOM_ATEN;
out_le32(iob+IOBCOM_REG, regword);
pr_debug(" <- %s\n", __func__);
return 0;
}
/* These are called very early. */
void __init iommu_init_early_pasemi(void)
{
int iommu_off;
#ifndef CONFIG_PPC_PASEMI_IOMMU
iommu_off = 1;
#else
iommu_off = of_chosen &&
of_get_property(of_chosen, "linux,iommu-off", NULL);
#endif
if (iommu_off)
return;
iob_init(NULL);
pasemi_pci_controller_ops.dma_dev_setup = pci_dma_dev_setup_pasemi;
pasemi_pci_controller_ops.dma_bus_setup = pci_dma_bus_setup_pasemi;
set_pci_dma_ops(&dma_iommu_ops);
}