linux/arch/arm/boot/dts/exynos5250-smdk5250.dts

235 lines
4.2 KiB
Plaintext
Raw Normal View History

/*
* SAMSUNG SMDK5250 board device tree source
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "exynos5250.dtsi"
/ {
model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
compatible = "samsung,smdk5250", "samsung,exynos5250";
aliases {
};
memory {
reg = <0x40000000 0x80000000>;
};
chosen {
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
};
i2c@12C60000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
gpios = <&gpb3 0 2 3 0>,
<&gpb3 1 2 3 0>;
eeprom@50 {
compatible = "samsung,s524ad0xd1";
reg = <0x50>;
};
};
i2c@12C70000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
gpios = <&gpb3 2 2 3 0>,
<&gpb3 3 2 3 0>;
eeprom@51 {
compatible = "samsung,s524ad0xd1";
reg = <0x51>;
};
wm8994: wm8994@1a {
compatible = "wlf,wm8994";
reg = <0x1a>;
};
};
i2c@121D0000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <40000>;
samsung,i2c-slave-addr = <0x38>;
sata-phy {
compatible = "samsung,sata-phy";
reg = <0x38>;
};
};
sata@122F0000 {
samsung,sata-freq = <66>;
};
i2c@12C80000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
gpios = <&gpa0 6 3 3 0>,
<&gpa0 7 3 3 0>;
hdmiddc@50 {
compatible = "samsung,exynos5-hdmiddc";
reg = <0x50>;
};
};
i2c@12C90000 {
status = "disabled";
};
i2c@12CA0000 {
status = "disabled";
};
i2c@12CB0000 {
status = "disabled";
};
i2c@12CC0000 {
status = "disabled";
};
i2c@12CD0000 {
status = "disabled";
};
i2c@12CE0000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
hdmiphy@38 {
compatible = "samsung,exynos5-hdmiphy";
reg = <0x38>;
};
};
dwmmc0@12200000 {
num-slots = <1>;
supports-highspeed;
broken-cd;
fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;
bus-width = <8>;
gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
};
};
dwmmc1@12210000 {
status = "disabled";
};
dwmmc2@12220000 {
num-slots = <1>;
supports-highspeed;
fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;
bus-width = <4>;
samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
disable-wp;
gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>,
<&gpc4 3 3 3 3>, <&gpc4 3 3 3 3>,
<&gpc4 5 3 3 3>, <&gpc4 6 3 3 3>;
};
};
dwmmc3@12230000 {
status = "disabled";
};
spi_0: spi@12d20000 {
status = "disabled";
};
spi_1: spi@12d30000 {
gpios = <&gpa2 4 2 3 0>,
<&gpa2 6 2 3 0>,
<&gpa2 7 2 3 0>;
w25q80bw@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25x80";
reg = <0>;
spi-max-frequency = <1000000>;
controller-data {
cs-gpio = <&gpa2 5 1 0 3>;
samsung,spi-feedback-delay = <0>;
};
partition@0 {
label = "U-Boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "Kernel";
reg = <0x40000 0xc0000>;
};
};
};
spi_2: spi@12d40000 {
status = "disabled";
};
hdmi {
hpd-gpio = <&gpx3 7 0xf 1 3>;
};
Merge branch 'next/dt-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt From Kukjin Kim: Here is Samsung DT for v3.8 and this is including DT for EXYNOS4X12 SoC, SMDK4412 board, pinctrl for exynos4x12, TMU, MFC, SATA and SATA PHY. As I commented on [4/7], this branch merged pinctrl/samsung to support pinctrl for exynos4x12 without useless merge conflicts. * 'next/dt-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (32 commits) ARM: EXYNOS: DT Support for SATA and SATA PHY ARM: dts: Remove broken-voltage property from sdhci node for exynos4210-trats ARM: dts: Add node for touchscreen for exynos4210-trats ARM: dts: Add node for touchscreen voltage regulator for exynos4210-trats ARM: dts: Add node for i2c3 bus for exynos4210-trats ARM: dts: Add nodes for GPIO keys available on Trats ARM: dts: Update for pinctrl-samsung driver for exynos4210-trats ARM: dts: Add nodes for pin controllers for exynos4x12 pinctrl: samsung: Add support for EXYNOS4X12 gpio: samsung: Skip registration if pinctrl driver is present on EXYNOS4X12 ARM: EXYNOS: Skip wakeup-int setup if pinctrl driver is used on EXYNOS4X12 ARM: dts: add board dts file for EXYNOS4412 based SMDK board ARM: dts: Add support for EXYNOS4X12 SoCs ARM: EXYNOS: Add devicetree node for TMU driver for exynos5 ARM: EXYNOS: Add devicetree node for TMU driver for exynos4 ARM: EXYNOS: Add MFC device tree support ARM: dts: Enable serial controllers on Origen and SMDKV310 Documentation: Update samsung-pinctrl device tree bindings documentation pinctrl: samsung: Add GPIO to IRQ translation pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT ... Add/add conflicts in: arch/arm/boot/dts/exynos5250-smdk5250.dts arch/arm/boot/dts/exynos5250.dtsi arch/arm/mach-exynos/mach-exynos5-dt.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-22 03:30:32 +08:00
codec@11000000 {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
};
i2s0: i2s@03830000 {
gpios = <&gpz 0 2 0 0>, <&gpz 1 2 0 0>, <&gpz 2 2 0 0>,
<&gpz 3 2 0 0>, <&gpz 4 2 0 0>, <&gpz 5 2 0 0>,
<&gpz 6 2 0 0>;
};
i2s1: i2s@12D60000 {
status = "disabled";
};
i2s2: i2s@12D70000 {
status = "disabled";
};
sound {
compatible = "samsung,smdk-wm8994";
samsung,i2s-controller = <&i2s0>;
samsung,audio-codec = <&wm8994>;
};
};