fpga: dfl: fme: add performance reporting support
This patch adds support for performance reporting private feature
for FPGA Management Engine (FME). Now it supports several different
performance counters, including 'basic', 'cache', 'fabric', 'vtd'
and 'vtd_sip'. It allows user to use standard linux tools to access
these performance counters.
e.g. List all events by "perf list"
perf list | grep fme
dfl_fme0/cache_read_hit/ [Kernel PMU event]
dfl_fme0/cache_read_miss/ [Kernel PMU event]
...
dfl_fme0/fab_mmio_read/ [Kernel PMU event]
dfl_fme0/fab_mmio_write/ [Kernel PMU event]
...
dfl_fme0/fab_port_mmio_read,portid=?/ [Kernel PMU event]
dfl_fme0/fab_port_mmio_write,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_port_devtlb_1g_fill,portid=?/ [Kernel PMU event]
dfl_fme0/vtd_port_devtlb_2m_fill,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_sip_iotlb_1g_hit/ [Kernel PMU event]
dfl_fme0/vtd_sip_iotlb_1g_miss/ [Kernel PMU event]
...
dfl_fme0/clock [Kernel PMU event]
...
e.g. check increased counter value after run one application using
"perf stat" command.
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_mmio_write/ ./test
Performance counter stats for './test':
1 dfl_fme0/fab_mmio_read/
2 dfl_fme0/fab_mmio_write/
1.009496520 seconds time elapsed
Please note that fabric counters support both fab_* and fab_port_*, but
actually they are sharing one set of performance counters in hardware.
If user wants to monitor overall data events on fab_* then fab_port_*
can't be supported at the same time, see example below:
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_port_mmio_write,portid=0/
Performance counter stats for 'system wide':
0 dfl_fme0/fab_mmio_read/
<not supported> dfl_fme0/fab_port_mmio_write,portid=0/
2.141064085 seconds time elapsed
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Link: https://lore.kernel.org/r/1587949583-12058-3-git-send-email-hao.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-27 09:06:23 +08:00
|
|
|
What: /sys/bus/event_source/devices/dfl_fmeX/format
|
|
|
|
|
Date: April 2020
|
|
|
|
|
KernelVersion: 5.8
|
|
|
|
|
Contact: Wu Hao <hao.wu@intel.com>
|
|
|
|
|
Description: Read-only. Attribute group to describe the magic bits
|
|
|
|
|
that go into perf_event_attr.config for a particular pmu.
|
|
|
|
|
(See ABI/testing/sysfs-bus-event_source-devices-format).
|
|
|
|
|
|
|
|
|
|
Each attribute under this group defines a bit range of the
|
|
|
|
|
perf_event_attr.config. All supported attributes are listed
|
2020-10-30 15:40:47 +08:00
|
|
|
below::
|
fpga: dfl: fme: add performance reporting support
This patch adds support for performance reporting private feature
for FPGA Management Engine (FME). Now it supports several different
performance counters, including 'basic', 'cache', 'fabric', 'vtd'
and 'vtd_sip'. It allows user to use standard linux tools to access
these performance counters.
e.g. List all events by "perf list"
perf list | grep fme
dfl_fme0/cache_read_hit/ [Kernel PMU event]
dfl_fme0/cache_read_miss/ [Kernel PMU event]
...
dfl_fme0/fab_mmio_read/ [Kernel PMU event]
dfl_fme0/fab_mmio_write/ [Kernel PMU event]
...
dfl_fme0/fab_port_mmio_read,portid=?/ [Kernel PMU event]
dfl_fme0/fab_port_mmio_write,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_port_devtlb_1g_fill,portid=?/ [Kernel PMU event]
dfl_fme0/vtd_port_devtlb_2m_fill,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_sip_iotlb_1g_hit/ [Kernel PMU event]
dfl_fme0/vtd_sip_iotlb_1g_miss/ [Kernel PMU event]
...
dfl_fme0/clock [Kernel PMU event]
...
e.g. check increased counter value after run one application using
"perf stat" command.
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_mmio_write/ ./test
Performance counter stats for './test':
1 dfl_fme0/fab_mmio_read/
2 dfl_fme0/fab_mmio_write/
1.009496520 seconds time elapsed
Please note that fabric counters support both fab_* and fab_port_*, but
actually they are sharing one set of performance counters in hardware.
If user wants to monitor overall data events on fab_* then fab_port_*
can't be supported at the same time, see example below:
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_port_mmio_write,portid=0/
Performance counter stats for 'system wide':
0 dfl_fme0/fab_mmio_read/
<not supported> dfl_fme0/fab_port_mmio_write,portid=0/
2.141064085 seconds time elapsed
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Link: https://lore.kernel.org/r/1587949583-12058-3-git-send-email-hao.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-27 09:06:23 +08:00
|
|
|
|
|
|
|
|
event = "config:0-11" - event ID
|
|
|
|
|
evtype = "config:12-15" - event type
|
|
|
|
|
portid = "config:16-23" - event source
|
|
|
|
|
|
2020-10-30 15:40:47 +08:00
|
|
|
For example::
|
fpga: dfl: fme: add performance reporting support
This patch adds support for performance reporting private feature
for FPGA Management Engine (FME). Now it supports several different
performance counters, including 'basic', 'cache', 'fabric', 'vtd'
and 'vtd_sip'. It allows user to use standard linux tools to access
these performance counters.
e.g. List all events by "perf list"
perf list | grep fme
dfl_fme0/cache_read_hit/ [Kernel PMU event]
dfl_fme0/cache_read_miss/ [Kernel PMU event]
...
dfl_fme0/fab_mmio_read/ [Kernel PMU event]
dfl_fme0/fab_mmio_write/ [Kernel PMU event]
...
dfl_fme0/fab_port_mmio_read,portid=?/ [Kernel PMU event]
dfl_fme0/fab_port_mmio_write,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_port_devtlb_1g_fill,portid=?/ [Kernel PMU event]
dfl_fme0/vtd_port_devtlb_2m_fill,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_sip_iotlb_1g_hit/ [Kernel PMU event]
dfl_fme0/vtd_sip_iotlb_1g_miss/ [Kernel PMU event]
...
dfl_fme0/clock [Kernel PMU event]
...
e.g. check increased counter value after run one application using
"perf stat" command.
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_mmio_write/ ./test
Performance counter stats for './test':
1 dfl_fme0/fab_mmio_read/
2 dfl_fme0/fab_mmio_write/
1.009496520 seconds time elapsed
Please note that fabric counters support both fab_* and fab_port_*, but
actually they are sharing one set of performance counters in hardware.
If user wants to monitor overall data events on fab_* then fab_port_*
can't be supported at the same time, see example below:
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_port_mmio_write,portid=0/
Performance counter stats for 'system wide':
0 dfl_fme0/fab_mmio_read/
<not supported> dfl_fme0/fab_port_mmio_write,portid=0/
2.141064085 seconds time elapsed
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Link: https://lore.kernel.org/r/1587949583-12058-3-git-send-email-hao.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-27 09:06:23 +08:00
|
|
|
|
|
|
|
|
fab_mmio_read = "event=0x06,evtype=0x02,portid=0xff"
|
|
|
|
|
|
|
|
|
|
It shows this fab_mmio_read is a fabric type (0x02) event with
|
|
|
|
|
0x06 local event id for overall monitoring (portid=0xff).
|
|
|
|
|
|
|
|
|
|
What: /sys/bus/event_source/devices/dfl_fmeX/cpumask
|
|
|
|
|
Date: April 2020
|
|
|
|
|
KernelVersion: 5.8
|
|
|
|
|
Contact: Wu Hao <hao.wu@intel.com>
|
|
|
|
|
Description: Read-only. This file always returns cpu which the PMU is bound
|
|
|
|
|
for access to all fme pmu performance monitoring events.
|
|
|
|
|
|
|
|
|
|
What: /sys/bus/event_source/devices/dfl_fmeX/events
|
|
|
|
|
Date: April 2020
|
|
|
|
|
KernelVersion: 5.8
|
|
|
|
|
Contact: Wu Hao <hao.wu@intel.com>
|
|
|
|
|
Description: Read-only. Attribute group to describe performance monitoring
|
|
|
|
|
events specific to fme. Each attribute in this group describes
|
|
|
|
|
a single performance monitoring event supported by this fme pmu.
|
|
|
|
|
The name of the file is the name of the event.
|
|
|
|
|
(See ABI/testing/sysfs-bus-event_source-devices-events).
|
|
|
|
|
|
|
|
|
|
All supported performance monitoring events are listed below.
|
|
|
|
|
|
2020-10-30 15:40:47 +08:00
|
|
|
Basic events (evtype=0x00)::
|
fpga: dfl: fme: add performance reporting support
This patch adds support for performance reporting private feature
for FPGA Management Engine (FME). Now it supports several different
performance counters, including 'basic', 'cache', 'fabric', 'vtd'
and 'vtd_sip'. It allows user to use standard linux tools to access
these performance counters.
e.g. List all events by "perf list"
perf list | grep fme
dfl_fme0/cache_read_hit/ [Kernel PMU event]
dfl_fme0/cache_read_miss/ [Kernel PMU event]
...
dfl_fme0/fab_mmio_read/ [Kernel PMU event]
dfl_fme0/fab_mmio_write/ [Kernel PMU event]
...
dfl_fme0/fab_port_mmio_read,portid=?/ [Kernel PMU event]
dfl_fme0/fab_port_mmio_write,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_port_devtlb_1g_fill,portid=?/ [Kernel PMU event]
dfl_fme0/vtd_port_devtlb_2m_fill,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_sip_iotlb_1g_hit/ [Kernel PMU event]
dfl_fme0/vtd_sip_iotlb_1g_miss/ [Kernel PMU event]
...
dfl_fme0/clock [Kernel PMU event]
...
e.g. check increased counter value after run one application using
"perf stat" command.
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_mmio_write/ ./test
Performance counter stats for './test':
1 dfl_fme0/fab_mmio_read/
2 dfl_fme0/fab_mmio_write/
1.009496520 seconds time elapsed
Please note that fabric counters support both fab_* and fab_port_*, but
actually they are sharing one set of performance counters in hardware.
If user wants to monitor overall data events on fab_* then fab_port_*
can't be supported at the same time, see example below:
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_port_mmio_write,portid=0/
Performance counter stats for 'system wide':
0 dfl_fme0/fab_mmio_read/
<not supported> dfl_fme0/fab_port_mmio_write,portid=0/
2.141064085 seconds time elapsed
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Link: https://lore.kernel.org/r/1587949583-12058-3-git-send-email-hao.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-27 09:06:23 +08:00
|
|
|
|
|
|
|
|
clock = "event=0x00,evtype=0x00,portid=0xff"
|
|
|
|
|
|
2020-10-30 15:40:47 +08:00
|
|
|
Cache events (evtype=0x01)::
|
fpga: dfl: fme: add performance reporting support
This patch adds support for performance reporting private feature
for FPGA Management Engine (FME). Now it supports several different
performance counters, including 'basic', 'cache', 'fabric', 'vtd'
and 'vtd_sip'. It allows user to use standard linux tools to access
these performance counters.
e.g. List all events by "perf list"
perf list | grep fme
dfl_fme0/cache_read_hit/ [Kernel PMU event]
dfl_fme0/cache_read_miss/ [Kernel PMU event]
...
dfl_fme0/fab_mmio_read/ [Kernel PMU event]
dfl_fme0/fab_mmio_write/ [Kernel PMU event]
...
dfl_fme0/fab_port_mmio_read,portid=?/ [Kernel PMU event]
dfl_fme0/fab_port_mmio_write,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_port_devtlb_1g_fill,portid=?/ [Kernel PMU event]
dfl_fme0/vtd_port_devtlb_2m_fill,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_sip_iotlb_1g_hit/ [Kernel PMU event]
dfl_fme0/vtd_sip_iotlb_1g_miss/ [Kernel PMU event]
...
dfl_fme0/clock [Kernel PMU event]
...
e.g. check increased counter value after run one application using
"perf stat" command.
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_mmio_write/ ./test
Performance counter stats for './test':
1 dfl_fme0/fab_mmio_read/
2 dfl_fme0/fab_mmio_write/
1.009496520 seconds time elapsed
Please note that fabric counters support both fab_* and fab_port_*, but
actually they are sharing one set of performance counters in hardware.
If user wants to monitor overall data events on fab_* then fab_port_*
can't be supported at the same time, see example below:
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_port_mmio_write,portid=0/
Performance counter stats for 'system wide':
0 dfl_fme0/fab_mmio_read/
<not supported> dfl_fme0/fab_port_mmio_write,portid=0/
2.141064085 seconds time elapsed
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Link: https://lore.kernel.org/r/1587949583-12058-3-git-send-email-hao.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-27 09:06:23 +08:00
|
|
|
|
|
|
|
|
cache_read_hit = "event=0x00,evtype=0x01,portid=0xff"
|
|
|
|
|
cache_read_miss = "event=0x01,evtype=0x01,portid=0xff"
|
|
|
|
|
cache_write_hit = "event=0x02,evtype=0x01,portid=0xff"
|
|
|
|
|
cache_write_miss = "event=0x03,evtype=0x01,portid=0xff"
|
|
|
|
|
cache_hold_request = "event=0x05,evtype=0x01,portid=0xff"
|
|
|
|
|
cache_data_write_port_contention =
|
|
|
|
|
"event=0x06,evtype=0x01,portid=0xff"
|
|
|
|
|
cache_tag_write_port_contention =
|
|
|
|
|
"event=0x07,evtype=0x01,portid=0xff"
|
|
|
|
|
cache_tx_req_stall = "event=0x08,evtype=0x01,portid=0xff"
|
|
|
|
|
cache_rx_req_stall = "event=0x09,evtype=0x01,portid=0xff"
|
|
|
|
|
cache_eviction = "event=0x0a,evtype=0x01,portid=0xff"
|
|
|
|
|
|
2020-10-30 15:40:47 +08:00
|
|
|
Fabric events (evtype=0x02)::
|
fpga: dfl: fme: add performance reporting support
This patch adds support for performance reporting private feature
for FPGA Management Engine (FME). Now it supports several different
performance counters, including 'basic', 'cache', 'fabric', 'vtd'
and 'vtd_sip'. It allows user to use standard linux tools to access
these performance counters.
e.g. List all events by "perf list"
perf list | grep fme
dfl_fme0/cache_read_hit/ [Kernel PMU event]
dfl_fme0/cache_read_miss/ [Kernel PMU event]
...
dfl_fme0/fab_mmio_read/ [Kernel PMU event]
dfl_fme0/fab_mmio_write/ [Kernel PMU event]
...
dfl_fme0/fab_port_mmio_read,portid=?/ [Kernel PMU event]
dfl_fme0/fab_port_mmio_write,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_port_devtlb_1g_fill,portid=?/ [Kernel PMU event]
dfl_fme0/vtd_port_devtlb_2m_fill,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_sip_iotlb_1g_hit/ [Kernel PMU event]
dfl_fme0/vtd_sip_iotlb_1g_miss/ [Kernel PMU event]
...
dfl_fme0/clock [Kernel PMU event]
...
e.g. check increased counter value after run one application using
"perf stat" command.
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_mmio_write/ ./test
Performance counter stats for './test':
1 dfl_fme0/fab_mmio_read/
2 dfl_fme0/fab_mmio_write/
1.009496520 seconds time elapsed
Please note that fabric counters support both fab_* and fab_port_*, but
actually they are sharing one set of performance counters in hardware.
If user wants to monitor overall data events on fab_* then fab_port_*
can't be supported at the same time, see example below:
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_port_mmio_write,portid=0/
Performance counter stats for 'system wide':
0 dfl_fme0/fab_mmio_read/
<not supported> dfl_fme0/fab_port_mmio_write,portid=0/
2.141064085 seconds time elapsed
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Link: https://lore.kernel.org/r/1587949583-12058-3-git-send-email-hao.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-27 09:06:23 +08:00
|
|
|
|
|
|
|
|
fab_pcie0_read = "event=0x00,evtype=0x02,portid=0xff"
|
|
|
|
|
fab_pcie0_write = "event=0x01,evtype=0x02,portid=0xff"
|
|
|
|
|
fab_pcie1_read = "event=0x02,evtype=0x02,portid=0xff"
|
|
|
|
|
fab_pcie1_write = "event=0x03,evtype=0x02,portid=0xff"
|
|
|
|
|
fab_upi_read = "event=0x04,evtype=0x02,portid=0xff"
|
|
|
|
|
fab_upi_write = "event=0x05,evtype=0x02,portid=0xff"
|
|
|
|
|
fab_mmio_read = "event=0x06,evtype=0x02,portid=0xff"
|
|
|
|
|
fab_mmio_write = "event=0x07,evtype=0x02,portid=0xff"
|
|
|
|
|
fab_port_pcie0_read = "event=0x00,evtype=0x02,portid=?"
|
|
|
|
|
fab_port_pcie0_write = "event=0x01,evtype=0x02,portid=?"
|
|
|
|
|
fab_port_pcie1_read = "event=0x02,evtype=0x02,portid=?"
|
|
|
|
|
fab_port_pcie1_write = "event=0x03,evtype=0x02,portid=?"
|
|
|
|
|
fab_port_upi_read = "event=0x04,evtype=0x02,portid=?"
|
|
|
|
|
fab_port_upi_write = "event=0x05,evtype=0x02,portid=?"
|
|
|
|
|
fab_port_mmio_read = "event=0x06,evtype=0x02,portid=?"
|
|
|
|
|
fab_port_mmio_write = "event=0x07,evtype=0x02,portid=?"
|
|
|
|
|
|
2020-10-30 15:40:47 +08:00
|
|
|
VTD events (evtype=0x03)::
|
fpga: dfl: fme: add performance reporting support
This patch adds support for performance reporting private feature
for FPGA Management Engine (FME). Now it supports several different
performance counters, including 'basic', 'cache', 'fabric', 'vtd'
and 'vtd_sip'. It allows user to use standard linux tools to access
these performance counters.
e.g. List all events by "perf list"
perf list | grep fme
dfl_fme0/cache_read_hit/ [Kernel PMU event]
dfl_fme0/cache_read_miss/ [Kernel PMU event]
...
dfl_fme0/fab_mmio_read/ [Kernel PMU event]
dfl_fme0/fab_mmio_write/ [Kernel PMU event]
...
dfl_fme0/fab_port_mmio_read,portid=?/ [Kernel PMU event]
dfl_fme0/fab_port_mmio_write,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_port_devtlb_1g_fill,portid=?/ [Kernel PMU event]
dfl_fme0/vtd_port_devtlb_2m_fill,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_sip_iotlb_1g_hit/ [Kernel PMU event]
dfl_fme0/vtd_sip_iotlb_1g_miss/ [Kernel PMU event]
...
dfl_fme0/clock [Kernel PMU event]
...
e.g. check increased counter value after run one application using
"perf stat" command.
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_mmio_write/ ./test
Performance counter stats for './test':
1 dfl_fme0/fab_mmio_read/
2 dfl_fme0/fab_mmio_write/
1.009496520 seconds time elapsed
Please note that fabric counters support both fab_* and fab_port_*, but
actually they are sharing one set of performance counters in hardware.
If user wants to monitor overall data events on fab_* then fab_port_*
can't be supported at the same time, see example below:
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_port_mmio_write,portid=0/
Performance counter stats for 'system wide':
0 dfl_fme0/fab_mmio_read/
<not supported> dfl_fme0/fab_port_mmio_write,portid=0/
2.141064085 seconds time elapsed
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Link: https://lore.kernel.org/r/1587949583-12058-3-git-send-email-hao.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-27 09:06:23 +08:00
|
|
|
|
|
|
|
|
vtd_port_read_transaction = "event=0x00,evtype=0x03,portid=?"
|
|
|
|
|
vtd_port_write_transaction = "event=0x01,evtype=0x03,portid=?"
|
|
|
|
|
vtd_port_devtlb_read_hit = "event=0x02,evtype=0x03,portid=?"
|
|
|
|
|
vtd_port_devtlb_write_hit = "event=0x03,evtype=0x03,portid=?"
|
|
|
|
|
vtd_port_devtlb_4k_fill = "event=0x04,evtype=0x03,portid=?"
|
|
|
|
|
vtd_port_devtlb_2m_fill = "event=0x05,evtype=0x03,portid=?"
|
|
|
|
|
vtd_port_devtlb_1g_fill = "event=0x06,evtype=0x03,portid=?"
|
|
|
|
|
|
2020-10-30 15:40:47 +08:00
|
|
|
VTD SIP events (evtype=0x04)::
|
fpga: dfl: fme: add performance reporting support
This patch adds support for performance reporting private feature
for FPGA Management Engine (FME). Now it supports several different
performance counters, including 'basic', 'cache', 'fabric', 'vtd'
and 'vtd_sip'. It allows user to use standard linux tools to access
these performance counters.
e.g. List all events by "perf list"
perf list | grep fme
dfl_fme0/cache_read_hit/ [Kernel PMU event]
dfl_fme0/cache_read_miss/ [Kernel PMU event]
...
dfl_fme0/fab_mmio_read/ [Kernel PMU event]
dfl_fme0/fab_mmio_write/ [Kernel PMU event]
...
dfl_fme0/fab_port_mmio_read,portid=?/ [Kernel PMU event]
dfl_fme0/fab_port_mmio_write,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_port_devtlb_1g_fill,portid=?/ [Kernel PMU event]
dfl_fme0/vtd_port_devtlb_2m_fill,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_sip_iotlb_1g_hit/ [Kernel PMU event]
dfl_fme0/vtd_sip_iotlb_1g_miss/ [Kernel PMU event]
...
dfl_fme0/clock [Kernel PMU event]
...
e.g. check increased counter value after run one application using
"perf stat" command.
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_mmio_write/ ./test
Performance counter stats for './test':
1 dfl_fme0/fab_mmio_read/
2 dfl_fme0/fab_mmio_write/
1.009496520 seconds time elapsed
Please note that fabric counters support both fab_* and fab_port_*, but
actually they are sharing one set of performance counters in hardware.
If user wants to monitor overall data events on fab_* then fab_port_*
can't be supported at the same time, see example below:
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_port_mmio_write,portid=0/
Performance counter stats for 'system wide':
0 dfl_fme0/fab_mmio_read/
<not supported> dfl_fme0/fab_port_mmio_write,portid=0/
2.141064085 seconds time elapsed
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Link: https://lore.kernel.org/r/1587949583-12058-3-git-send-email-hao.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-27 09:06:23 +08:00
|
|
|
|
|
|
|
|
vtd_sip_iotlb_4k_hit = "event=0x00,evtype=0x04,portid=0xff"
|
|
|
|
|
vtd_sip_iotlb_2m_hit = "event=0x01,evtype=0x04,portid=0xff"
|
|
|
|
|
vtd_sip_iotlb_1g_hit = "event=0x02,evtype=0x04,portid=0xff"
|
|
|
|
|
vtd_sip_slpwc_l3_hit = "event=0x03,evtype=0x04,portid=0xff"
|
|
|
|
|
vtd_sip_slpwc_l4_hit = "event=0x04,evtype=0x04,portid=0xff"
|
|
|
|
|
vtd_sip_rcc_hit = "event=0x05,evtype=0x04,portid=0xff"
|
|
|
|
|
vtd_sip_iotlb_4k_miss = "event=0x06,evtype=0x04,portid=0xff"
|
|
|
|
|
vtd_sip_iotlb_2m_miss = "event=0x07,evtype=0x04,portid=0xff"
|
|
|
|
|
vtd_sip_iotlb_1g_miss = "event=0x08,evtype=0x04,portid=0xff"
|
|
|
|
|
vtd_sip_slpwc_l3_miss = "event=0x09,evtype=0x04,portid=0xff"
|
|
|
|
|
vtd_sip_slpwc_l4_miss = "event=0x0a,evtype=0x04,portid=0xff"
|
|
|
|
|
vtd_sip_rcc_miss = "event=0x0b,evtype=0x04,portid=0xff"
|