linux/drivers/pci/host/pcie-designware.c

778 lines
20 KiB
C
Raw Normal View History

/*
* Synopsys Designware PCIe host controller driver
*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Author: Jingoo Han <jg1.han@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/msi.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
#include <linux/pci.h>
#include <linux/pci_regs.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#include "pcie-designware.h"
/* Synopsis specific PCIE configuration registers */
#define PCIE_PORT_LINK_CONTROL 0x710
#define PORT_LINK_MODE_MASK (0x3f << 16)
#define PORT_LINK_MODE_1_LANES (0x1 << 16)
#define PORT_LINK_MODE_2_LANES (0x3 << 16)
#define PORT_LINK_MODE_4_LANES (0x7 << 16)
#define PORT_LINK_MODE_8_LANES (0xf << 16)
#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17)
#define PORT_LOGIC_LINK_WIDTH_MASK (0x1f << 8)
#define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8)
#define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8)
#define PORT_LOGIC_LINK_WIDTH_4_LANES (0x4 << 8)
#define PORT_LOGIC_LINK_WIDTH_8_LANES (0x8 << 8)
#define PCIE_MSI_ADDR_LO 0x820
#define PCIE_MSI_ADDR_HI 0x824
#define PCIE_MSI_INTR0_ENABLE 0x828
#define PCIE_MSI_INTR0_MASK 0x82C
#define PCIE_MSI_INTR0_STATUS 0x830
#define PCIE_ATU_VIEWPORT 0x900
#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
#define PCIE_ATU_CR1 0x904
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
#define PCIE_ATU_TYPE_IO (0x2 << 0)
#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
#define PCIE_ATU_CR2 0x908
#define PCIE_ATU_ENABLE (0x1 << 31)
#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
#define PCIE_ATU_LOWER_BASE 0x90C
#define PCIE_ATU_UPPER_BASE 0x910
#define PCIE_ATU_LIMIT 0x914
#define PCIE_ATU_LOWER_TARGET 0x918
#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
#define PCIE_ATU_UPPER_TARGET 0x91C
static struct pci_ops dw_pcie_ops;
int dw_pcie_cfg_read(void __iomem *addr, int size, u32 *val)
{
if ((uintptr_t)addr & (size - 1)) {
*val = 0;
return PCIBIOS_BAD_REGISTER_NUMBER;
}
if (size == 4)
*val = readl(addr);
else if (size == 2)
*val = readw(addr);
else if (size == 1)
*val = readb(addr);
else {
*val = 0;
return PCIBIOS_BAD_REGISTER_NUMBER;
}
return PCIBIOS_SUCCESSFUL;
}
int dw_pcie_cfg_write(void __iomem *addr, int size, u32 val)
{
if ((uintptr_t)addr & (size - 1))
return PCIBIOS_BAD_REGISTER_NUMBER;
if (size == 4)
writel(val, addr);
else if (size == 2)
writew(val, addr);
else if (size == 1)
writeb(val, addr);
else
return PCIBIOS_BAD_REGISTER_NUMBER;
return PCIBIOS_SUCCESSFUL;
}
static inline void dw_pcie_readl_rc(struct pcie_port *pp, u32 reg, u32 *val)
{
if (pp->ops->readl_rc)
pp->ops->readl_rc(pp, pp->dbi_base + reg, val);
else
*val = readl(pp->dbi_base + reg);
}
static inline void dw_pcie_writel_rc(struct pcie_port *pp, u32 val, u32 reg)
{
if (pp->ops->writel_rc)
pp->ops->writel_rc(pp, val, pp->dbi_base + reg);
else
writel(val, pp->dbi_base + reg);
}
static int dw_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
u32 *val)
{
if (pp->ops->rd_own_conf)
return pp->ops->rd_own_conf(pp, where, size, val);
return dw_pcie_cfg_read(pp->dbi_base + where, size, val);
}
static int dw_pcie_wr_own_conf(struct pcie_port *pp, int where, int size,
u32 val)
{
if (pp->ops->wr_own_conf)
return pp->ops->wr_own_conf(pp, where, size, val);
return dw_pcie_cfg_write(pp->dbi_base + where, size, val);
}
static void dw_pcie_prog_outbound_atu(struct pcie_port *pp, int index,
int type, u64 cpu_addr, u64 pci_addr, u32 size)
{
u32 val;
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | index,
PCIE_ATU_VIEWPORT);
dw_pcie_writel_rc(pp, lower_32_bits(cpu_addr), PCIE_ATU_LOWER_BASE);
dw_pcie_writel_rc(pp, upper_32_bits(cpu_addr), PCIE_ATU_UPPER_BASE);
dw_pcie_writel_rc(pp, lower_32_bits(cpu_addr + size - 1),
PCIE_ATU_LIMIT);
dw_pcie_writel_rc(pp, lower_32_bits(pci_addr), PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, upper_32_bits(pci_addr), PCIE_ATU_UPPER_TARGET);
dw_pcie_writel_rc(pp, type, PCIE_ATU_CR1);
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
/*
* Make sure ATU enable takes effect before any subsequent config
* and I/O accesses.
*/
dw_pcie_readl_rc(pp, PCIE_ATU_CR2, &val);
}
static struct irq_chip dw_msi_irq_chip = {
.name = "PCI-MSI",
.irq_enable = pci_msi_unmask_irq,
.irq_disable = pci_msi_mask_irq,
.irq_mask = pci_msi_mask_irq,
.irq_unmask = pci_msi_unmask_irq,
};
/* MSI int handler */
irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
{
unsigned long val;
int i, pos, irq;
irqreturn_t ret = IRQ_NONE;
for (i = 0; i < MAX_MSI_CTRLS; i++) {
dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_STATUS + i * 12, 4,
(u32 *)&val);
if (val) {
ret = IRQ_HANDLED;
pos = 0;
while ((pos = find_next_bit(&val, 32, pos)) != 32) {
irq = irq_find_mapping(pp->irq_domain,
i * 32 + pos);
dw_pcie_wr_own_conf(pp,
PCIE_MSI_INTR0_STATUS + i * 12,
4, 1 << pos);
generic_handle_irq(irq);
pos++;
}
}
}
return ret;
}
void dw_pcie_msi_init(struct pcie_port *pp)
{
u64 msi_target;
pp->msi_data = __get_free_pages(GFP_KERNEL, 0);
msi_target = virt_to_phys((void *)pp->msi_data);
/* program the msi_data */
dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_LO, 4,
(u32)(msi_target & 0xffffffff));
dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4,
(u32)(msi_target >> 32 & 0xffffffff));
}
2014-07-22 00:58:42 +08:00
static void dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
{
unsigned int res, bit, val;
res = (irq / 32) * 12;
bit = irq % 32;
dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
val &= ~(1 << bit);
dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
}
static void clear_irq_range(struct pcie_port *pp, unsigned int irq_base,
unsigned int nvec, unsigned int pos)
{
2014-07-22 00:58:42 +08:00
unsigned int i;
for (i = 0; i < nvec; i++) {
irq_set_msi_desc_off(irq_base, i, NULL);
/* Disable corresponding interrupt on MSI controller */
2014-07-22 00:58:42 +08:00
if (pp->ops->msi_clear_irq)
pp->ops->msi_clear_irq(pp, pos + i);
else
dw_pcie_msi_clear_irq(pp, pos + i);
}
bitmap_release_region(pp->msi_irq_in_use, pos, order_base_2(nvec));
}
2014-07-22 00:58:42 +08:00
static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)
{
unsigned int res, bit, val;
res = (irq / 32) * 12;
bit = irq % 32;
dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
val |= 1 << bit;
dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
}
static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)
{
int irq, pos0, i;
struct pcie_port *pp = (struct pcie_port *) msi_desc_to_pci_sysdata(desc);
pos0 = bitmap_find_free_region(pp->msi_irq_in_use, MAX_MSI_IRQS,
order_base_2(no_irqs));
if (pos0 < 0)
goto no_valid_irq;
irq = irq_find_mapping(pp->irq_domain, pos0);
if (!irq)
goto no_valid_irq;
/*
* irq_create_mapping (called from dw_pcie_host_init) pre-allocates
* descs so there is no need to allocate descs here. We can therefore
* assume that if irq_find_mapping above returns non-zero, then the
* descs are also successfully allocated.
*/
for (i = 0; i < no_irqs; i++) {
if (irq_set_msi_desc_off(irq, i, desc) != 0) {
clear_irq_range(pp, irq, i, pos0);
goto no_valid_irq;
}
/*Enable corresponding interrupt in MSI interrupt controller */
2014-07-22 00:58:42 +08:00
if (pp->ops->msi_set_irq)
pp->ops->msi_set_irq(pp, pos0 + i);
else
dw_pcie_msi_set_irq(pp, pos0 + i);
}
*pos = pos0;
desc->nvec_used = no_irqs;
desc->msi_attrib.multiple = order_base_2(no_irqs);
return irq;
no_valid_irq:
*pos = pos0;
return -ENOSPC;
}
static void dw_msi_setup_msg(struct pcie_port *pp, unsigned int irq, u32 pos)
{
struct msi_msg msg;
u64 msi_target;
if (pp->ops->get_msi_addr)
msi_target = pp->ops->get_msi_addr(pp);
2014-07-22 00:58:42 +08:00
else
msi_target = virt_to_phys((void *)pp->msi_data);
msg.address_lo = (u32)(msi_target & 0xffffffff);
msg.address_hi = (u32)(msi_target >> 32 & 0xffffffff);
if (pp->ops->get_msi_data)
msg.data = pp->ops->get_msi_data(pp, pos);
else
msg.data = pos;
pci_write_msi_msg(irq, &msg);
}
static int dw_msi_setup_irq(struct msi_controller *chip, struct pci_dev *pdev,
struct msi_desc *desc)
{
int irq, pos;
struct pcie_port *pp = pdev->bus->sysdata;
if (desc->msi_attrib.is_msix)
return -EINVAL;
irq = assign_irq(1, desc, &pos);
if (irq < 0)
return irq;
dw_msi_setup_msg(pp, irq, pos);
return 0;
}
static int dw_msi_setup_irqs(struct msi_controller *chip, struct pci_dev *pdev,
int nvec, int type)
{
#ifdef CONFIG_PCI_MSI
int irq, pos;
struct msi_desc *desc;
struct pcie_port *pp = pdev->bus->sysdata;
/* MSI-X interrupts are not supported */
if (type == PCI_CAP_ID_MSIX)
return -EINVAL;
WARN_ON(!list_is_singular(&pdev->dev.msi_list));
desc = list_entry(pdev->dev.msi_list.next, struct msi_desc, list);
irq = assign_irq(nvec, desc, &pos);
if (irq < 0)
return irq;
dw_msi_setup_msg(pp, irq, pos);
return 0;
#else
return -EINVAL;
#endif
}
static void dw_msi_teardown_irq(struct msi_controller *chip, unsigned int irq)
{
struct irq_data *data = irq_get_irq_data(irq);
struct msi_desc *msi = irq_data_get_msi_desc(data);
struct pcie_port *pp = (struct pcie_port *) msi_desc_to_pci_sysdata(msi);
clear_irq_range(pp, irq, 1, data->hwirq);
}
static struct msi_controller dw_pcie_msi_chip = {
.setup_irq = dw_msi_setup_irq,
.setup_irqs = dw_msi_setup_irqs,
.teardown_irq = dw_msi_teardown_irq,
};
int dw_pcie_link_up(struct pcie_port *pp)
{
if (pp->ops->link_up)
return pp->ops->link_up(pp);
return 0;
}
static int dw_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
irq_hw_number_t hwirq)
{
irq_set_chip_and_handler(irq, &dw_msi_irq_chip, handle_simple_irq);
irq_set_chip_data(irq, domain->host_data);
return 0;
}
static const struct irq_domain_ops msi_domain_ops = {
.map = dw_pcie_msi_map,
};
int dw_pcie_host_init(struct pcie_port *pp)
{
struct device_node *np = pp->dev->of_node;
struct platform_device *pdev = to_platform_device(pp->dev);
struct pci_bus *bus, *child;
struct resource *cfg_res;
u32 val;
int i, ret;
LIST_HEAD(res);
struct resource_entry *win;
cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config");
if (cfg_res) {
pp->cfg0_size = resource_size(cfg_res)/2;
pp->cfg1_size = resource_size(cfg_res)/2;
pp->cfg0_base = cfg_res->start;
pp->cfg1_base = cfg_res->start + pp->cfg0_size;
} else if (!pp->va_cfg0_base) {
dev_err(pp->dev, "missing *config* reg space\n");
}
ret = of_pci_get_host_bridge_resources(np, 0, 0xff, &res, &pp->io_base);
if (ret)
return ret;
/* Get the I/O and memory ranges from DT */
resource_list_for_each_entry(win, &res) {
switch (resource_type(win->res)) {
case IORESOURCE_IO:
pp->io = win->res;
pp->io->name = "I/O";
pp->io_size = resource_size(pp->io);
pp->io_bus_addr = pp->io->start - win->offset;
ret = pci_remap_iospace(pp->io, pp->io_base);
if (ret) {
dev_warn(pp->dev, "error %d: failed to map resource %pR\n",
ret, pp->io);
continue;
}
break;
case IORESOURCE_MEM:
pp->mem = win->res;
pp->mem->name = "MEM";
pp->mem_size = resource_size(pp->mem);
pp->mem_bus_addr = pp->mem->start - win->offset;
break;
case 0:
pp->cfg = win->res;
pp->cfg0_size = resource_size(pp->cfg)/2;
pp->cfg1_size = resource_size(pp->cfg)/2;
pp->cfg0_base = pp->cfg->start;
pp->cfg1_base = pp->cfg->start + pp->cfg0_size;
break;
case IORESOURCE_BUS:
pp->busn = win->res;
break;
default:
continue;
}
}
if (!pp->dbi_base) {
pp->dbi_base = devm_ioremap(pp->dev, pp->cfg->start,
resource_size(pp->cfg));
if (!pp->dbi_base) {
dev_err(pp->dev, "error with ioremap\n");
return -ENOMEM;
}
}
pp->mem_base = pp->mem->start;
if (!pp->va_cfg0_base) {
PCI: designware: Add support for v3.65 hardware The Keystone PCI controller is based on v3.65 DesignWare hardware. This version differs from newer versions of the hardware in functional areas discussed below that make it necessary to change dw_pcie_host_init() to support v3.65 based PCI controller. 1. No support for ATU port. Any ATU-specific resource handling code is to be bypassed for v3.65 h/w. 2. MSI controller uses application space to implement MSI and 32 MSI interrupts are multiplexed over 8 IRQs to the host. Hence the code to process MSI IRQ needs to be different. This patch allows platform driver to provide its own irq_domain_ops ptr to irq_domain_add_linear() through an API callback from the DesignWare core driver. 3. MSI interrupt generation requires EP to write to the RC's application register. So enhance the driver to allow setup of inbound access to MSI IRQ register as a post scan bus API callback. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pratyush Anand <pratyush.anand@st.com> Acked-by: Mohit KUMAR <mohit.kumar@st.com> Acked-by: Jingoo Han <jg1.han@samsung.com> CC: Santosh Shilimkar <santosh.shilimkar@ti.com> CC: Russell King <linux@arm.linux.org.uk> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Jingoo Han <jg1.han@samsung.com> CC: Richard Zhu <r65037@freescale.com> CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Marek Vasut <marex@denx.de> CC: Arnd Bergmann <arnd@arndb.de> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Randy Dunlap <rdunlap@infradead.org> CC: Grant Likely <grant.likely@linaro.org>
2014-07-24 02:54:51 +08:00
pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
pp->cfg0_size);
PCI: designware: Add support for v3.65 hardware The Keystone PCI controller is based on v3.65 DesignWare hardware. This version differs from newer versions of the hardware in functional areas discussed below that make it necessary to change dw_pcie_host_init() to support v3.65 based PCI controller. 1. No support for ATU port. Any ATU-specific resource handling code is to be bypassed for v3.65 h/w. 2. MSI controller uses application space to implement MSI and 32 MSI interrupts are multiplexed over 8 IRQs to the host. Hence the code to process MSI IRQ needs to be different. This patch allows platform driver to provide its own irq_domain_ops ptr to irq_domain_add_linear() through an API callback from the DesignWare core driver. 3. MSI interrupt generation requires EP to write to the RC's application register. So enhance the driver to allow setup of inbound access to MSI IRQ register as a post scan bus API callback. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pratyush Anand <pratyush.anand@st.com> Acked-by: Mohit KUMAR <mohit.kumar@st.com> Acked-by: Jingoo Han <jg1.han@samsung.com> CC: Santosh Shilimkar <santosh.shilimkar@ti.com> CC: Russell King <linux@arm.linux.org.uk> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Jingoo Han <jg1.han@samsung.com> CC: Richard Zhu <r65037@freescale.com> CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Marek Vasut <marex@denx.de> CC: Arnd Bergmann <arnd@arndb.de> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Randy Dunlap <rdunlap@infradead.org> CC: Grant Likely <grant.likely@linaro.org>
2014-07-24 02:54:51 +08:00
if (!pp->va_cfg0_base) {
dev_err(pp->dev, "error with ioremap in function\n");
return -ENOMEM;
}
}
PCI: designware: Add support for v3.65 hardware The Keystone PCI controller is based on v3.65 DesignWare hardware. This version differs from newer versions of the hardware in functional areas discussed below that make it necessary to change dw_pcie_host_init() to support v3.65 based PCI controller. 1. No support for ATU port. Any ATU-specific resource handling code is to be bypassed for v3.65 h/w. 2. MSI controller uses application space to implement MSI and 32 MSI interrupts are multiplexed over 8 IRQs to the host. Hence the code to process MSI IRQ needs to be different. This patch allows platform driver to provide its own irq_domain_ops ptr to irq_domain_add_linear() through an API callback from the DesignWare core driver. 3. MSI interrupt generation requires EP to write to the RC's application register. So enhance the driver to allow setup of inbound access to MSI IRQ register as a post scan bus API callback. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pratyush Anand <pratyush.anand@st.com> Acked-by: Mohit KUMAR <mohit.kumar@st.com> Acked-by: Jingoo Han <jg1.han@samsung.com> CC: Santosh Shilimkar <santosh.shilimkar@ti.com> CC: Russell King <linux@arm.linux.org.uk> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Jingoo Han <jg1.han@samsung.com> CC: Richard Zhu <r65037@freescale.com> CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Marek Vasut <marex@denx.de> CC: Arnd Bergmann <arnd@arndb.de> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Randy Dunlap <rdunlap@infradead.org> CC: Grant Likely <grant.likely@linaro.org>
2014-07-24 02:54:51 +08:00
if (!pp->va_cfg1_base) {
PCI: designware: Add support for v3.65 hardware The Keystone PCI controller is based on v3.65 DesignWare hardware. This version differs from newer versions of the hardware in functional areas discussed below that make it necessary to change dw_pcie_host_init() to support v3.65 based PCI controller. 1. No support for ATU port. Any ATU-specific resource handling code is to be bypassed for v3.65 h/w. 2. MSI controller uses application space to implement MSI and 32 MSI interrupts are multiplexed over 8 IRQs to the host. Hence the code to process MSI IRQ needs to be different. This patch allows platform driver to provide its own irq_domain_ops ptr to irq_domain_add_linear() through an API callback from the DesignWare core driver. 3. MSI interrupt generation requires EP to write to the RC's application register. So enhance the driver to allow setup of inbound access to MSI IRQ register as a post scan bus API callback. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pratyush Anand <pratyush.anand@st.com> Acked-by: Mohit KUMAR <mohit.kumar@st.com> Acked-by: Jingoo Han <jg1.han@samsung.com> CC: Santosh Shilimkar <santosh.shilimkar@ti.com> CC: Russell King <linux@arm.linux.org.uk> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Jingoo Han <jg1.han@samsung.com> CC: Richard Zhu <r65037@freescale.com> CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Marek Vasut <marex@denx.de> CC: Arnd Bergmann <arnd@arndb.de> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Randy Dunlap <rdunlap@infradead.org> CC: Grant Likely <grant.likely@linaro.org>
2014-07-24 02:54:51 +08:00
pp->va_cfg1_base = devm_ioremap(pp->dev, pp->cfg1_base,
pp->cfg1_size);
PCI: designware: Add support for v3.65 hardware The Keystone PCI controller is based on v3.65 DesignWare hardware. This version differs from newer versions of the hardware in functional areas discussed below that make it necessary to change dw_pcie_host_init() to support v3.65 based PCI controller. 1. No support for ATU port. Any ATU-specific resource handling code is to be bypassed for v3.65 h/w. 2. MSI controller uses application space to implement MSI and 32 MSI interrupts are multiplexed over 8 IRQs to the host. Hence the code to process MSI IRQ needs to be different. This patch allows platform driver to provide its own irq_domain_ops ptr to irq_domain_add_linear() through an API callback from the DesignWare core driver. 3. MSI interrupt generation requires EP to write to the RC's application register. So enhance the driver to allow setup of inbound access to MSI IRQ register as a post scan bus API callback. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pratyush Anand <pratyush.anand@st.com> Acked-by: Mohit KUMAR <mohit.kumar@st.com> Acked-by: Jingoo Han <jg1.han@samsung.com> CC: Santosh Shilimkar <santosh.shilimkar@ti.com> CC: Russell King <linux@arm.linux.org.uk> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Jingoo Han <jg1.han@samsung.com> CC: Richard Zhu <r65037@freescale.com> CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Marek Vasut <marex@denx.de> CC: Arnd Bergmann <arnd@arndb.de> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Randy Dunlap <rdunlap@infradead.org> CC: Grant Likely <grant.likely@linaro.org>
2014-07-24 02:54:51 +08:00
if (!pp->va_cfg1_base) {
dev_err(pp->dev, "error with ioremap\n");
return -ENOMEM;
}
}
ret = of_property_read_u32(np, "num-lanes", &pp->lanes);
if (ret)
pp->lanes = 0;
if (IS_ENABLED(CONFIG_PCI_MSI)) {
PCI: designware: Add support for v3.65 hardware The Keystone PCI controller is based on v3.65 DesignWare hardware. This version differs from newer versions of the hardware in functional areas discussed below that make it necessary to change dw_pcie_host_init() to support v3.65 based PCI controller. 1. No support for ATU port. Any ATU-specific resource handling code is to be bypassed for v3.65 h/w. 2. MSI controller uses application space to implement MSI and 32 MSI interrupts are multiplexed over 8 IRQs to the host. Hence the code to process MSI IRQ needs to be different. This patch allows platform driver to provide its own irq_domain_ops ptr to irq_domain_add_linear() through an API callback from the DesignWare core driver. 3. MSI interrupt generation requires EP to write to the RC's application register. So enhance the driver to allow setup of inbound access to MSI IRQ register as a post scan bus API callback. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pratyush Anand <pratyush.anand@st.com> Acked-by: Mohit KUMAR <mohit.kumar@st.com> Acked-by: Jingoo Han <jg1.han@samsung.com> CC: Santosh Shilimkar <santosh.shilimkar@ti.com> CC: Russell King <linux@arm.linux.org.uk> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Jingoo Han <jg1.han@samsung.com> CC: Richard Zhu <r65037@freescale.com> CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Marek Vasut <marex@denx.de> CC: Arnd Bergmann <arnd@arndb.de> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Randy Dunlap <rdunlap@infradead.org> CC: Grant Likely <grant.likely@linaro.org>
2014-07-24 02:54:51 +08:00
if (!pp->ops->msi_host_init) {
pp->irq_domain = irq_domain_add_linear(pp->dev->of_node,
MAX_MSI_IRQS, &msi_domain_ops,
&dw_pcie_msi_chip);
if (!pp->irq_domain) {
dev_err(pp->dev, "irq domain init failed\n");
return -ENXIO;
}
PCI: designware: Add support for v3.65 hardware The Keystone PCI controller is based on v3.65 DesignWare hardware. This version differs from newer versions of the hardware in functional areas discussed below that make it necessary to change dw_pcie_host_init() to support v3.65 based PCI controller. 1. No support for ATU port. Any ATU-specific resource handling code is to be bypassed for v3.65 h/w. 2. MSI controller uses application space to implement MSI and 32 MSI interrupts are multiplexed over 8 IRQs to the host. Hence the code to process MSI IRQ needs to be different. This patch allows platform driver to provide its own irq_domain_ops ptr to irq_domain_add_linear() through an API callback from the DesignWare core driver. 3. MSI interrupt generation requires EP to write to the RC's application register. So enhance the driver to allow setup of inbound access to MSI IRQ register as a post scan bus API callback. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pratyush Anand <pratyush.anand@st.com> Acked-by: Mohit KUMAR <mohit.kumar@st.com> Acked-by: Jingoo Han <jg1.han@samsung.com> CC: Santosh Shilimkar <santosh.shilimkar@ti.com> CC: Russell King <linux@arm.linux.org.uk> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Jingoo Han <jg1.han@samsung.com> CC: Richard Zhu <r65037@freescale.com> CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Marek Vasut <marex@denx.de> CC: Arnd Bergmann <arnd@arndb.de> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Randy Dunlap <rdunlap@infradead.org> CC: Grant Likely <grant.likely@linaro.org>
2014-07-24 02:54:51 +08:00
for (i = 0; i < MAX_MSI_IRQS; i++)
irq_create_mapping(pp->irq_domain, i);
} else {
ret = pp->ops->msi_host_init(pp, &dw_pcie_msi_chip);
if (ret < 0)
return ret;
}
}
if (pp->ops->host_init)
pp->ops->host_init(pp);
if (!pp->ops->rd_other_conf)
dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1,
PCIE_ATU_TYPE_MEM, pp->mem_base,
pp->mem_bus_addr, pp->mem_size);
dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
/* program correct class for RC */
dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val);
val |= PORT_LOGIC_SPEED_CHANGE;
dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
pp->root_bus_nr = pp->busn->start;
if (IS_ENABLED(CONFIG_PCI_MSI)) {
bus = pci_scan_root_bus_msi(pp->dev, pp->root_bus_nr,
&dw_pcie_ops, pp, &res,
&dw_pcie_msi_chip);
dw_pcie_msi_chip.dev = pp->dev;
} else
bus = pci_scan_root_bus(pp->dev, pp->root_bus_nr, &dw_pcie_ops,
pp, &res);
if (!bus)
return -ENOMEM;
if (pp->ops->scan_bus)
pp->ops->scan_bus(pp);
#ifdef CONFIG_ARM
/* support old dtbs that incorrectly describe IRQs */
pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
#endif
if (!pci_has_flag(PCI_PROBE_ONLY)) {
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
list_for_each_entry(child, &bus->children, node)
pcie_bus_configure_settings(child);
}
pci_bus_add_devices(bus);
return 0;
}
static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
u32 devfn, int where, int size, u32 *val)
{
int ret, type;
u32 busdev, cfg_size;
u64 cpu_addr;
void __iomem *va_cfg_base;
if (pp->ops->rd_other_conf)
return pp->ops->rd_other_conf(pp, bus, devfn, where, size, val);
busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) |
PCIE_ATU_FUNC(PCI_FUNC(devfn));
if (bus->parent->number == pp->root_bus_nr) {
type = PCIE_ATU_TYPE_CFG0;
cpu_addr = pp->cfg0_base;
cfg_size = pp->cfg0_size;
va_cfg_base = pp->va_cfg0_base;
} else {
type = PCIE_ATU_TYPE_CFG1;
cpu_addr = pp->cfg1_base;
cfg_size = pp->cfg1_size;
va_cfg_base = pp->va_cfg1_base;
}
dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX0,
type, cpu_addr,
busdev, cfg_size);
ret = dw_pcie_cfg_read(va_cfg_base + where, size, val);
dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX0,
PCIE_ATU_TYPE_IO, pp->io_base,
pp->io_bus_addr, pp->io_size);
return ret;
}
static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
u32 devfn, int where, int size, u32 val)
{
int ret, type;
u32 busdev, cfg_size;
u64 cpu_addr;
void __iomem *va_cfg_base;
if (pp->ops->wr_other_conf)
return pp->ops->wr_other_conf(pp, bus, devfn, where, size, val);
busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) |
PCIE_ATU_FUNC(PCI_FUNC(devfn));
if (bus->parent->number == pp->root_bus_nr) {
type = PCIE_ATU_TYPE_CFG0;
cpu_addr = pp->cfg0_base;
cfg_size = pp->cfg0_size;
va_cfg_base = pp->va_cfg0_base;
} else {
type = PCIE_ATU_TYPE_CFG1;
cpu_addr = pp->cfg1_base;
cfg_size = pp->cfg1_size;
va_cfg_base = pp->va_cfg1_base;
}
dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX0,
type, cpu_addr,
busdev, cfg_size);
ret = dw_pcie_cfg_write(va_cfg_base + where, size, val);
dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX0,
PCIE_ATU_TYPE_IO, pp->io_base,
pp->io_bus_addr, pp->io_size);
return ret;
}
static int dw_pcie_valid_config(struct pcie_port *pp,
struct pci_bus *bus, int dev)
{
/* If there is no link, then there is no device */
if (bus->number != pp->root_bus_nr) {
if (!dw_pcie_link_up(pp))
return 0;
}
/* access only one slot on each root port */
if (bus->number == pp->root_bus_nr && dev > 0)
return 0;
/*
* do not read more than one device on the bus directly attached
* to RC's (Virtual Bridge's) DS side.
*/
if (bus->primary == pp->root_bus_nr && dev > 0)
return 0;
return 1;
}
static int dw_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
int size, u32 *val)
{
struct pcie_port *pp = bus->sysdata;
if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0) {
*val = 0xffffffff;
return PCIBIOS_DEVICE_NOT_FOUND;
}
if (bus->number == pp->root_bus_nr)
return dw_pcie_rd_own_conf(pp, where, size, val);
return dw_pcie_rd_other_conf(pp, bus, devfn, where, size, val);
}
static int dw_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
int where, int size, u32 val)
{
struct pcie_port *pp = bus->sysdata;
if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
if (bus->number == pp->root_bus_nr)
return dw_pcie_wr_own_conf(pp, where, size, val);
return dw_pcie_wr_other_conf(pp, bus, devfn, where, size, val);
}
static struct pci_ops dw_pcie_ops = {
.read = dw_pcie_rd_conf,
.write = dw_pcie_wr_conf,
};
void dw_pcie_setup_rc(struct pcie_port *pp)
{
u32 val;
u32 membase;
u32 memlimit;
/* set the number of lanes */
dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL, &val);
val &= ~PORT_LINK_MODE_MASK;
switch (pp->lanes) {
case 1:
val |= PORT_LINK_MODE_1_LANES;
break;
case 2:
val |= PORT_LINK_MODE_2_LANES;
break;
case 4:
val |= PORT_LINK_MODE_4_LANES;
break;
case 8:
val |= PORT_LINK_MODE_8_LANES;
break;
default:
dev_err(pp->dev, "num-lanes %u: invalid value\n", pp->lanes);
return;
}
dw_pcie_writel_rc(pp, val, PCIE_PORT_LINK_CONTROL);
/* set link width speed control register */
dw_pcie_readl_rc(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, &val);
val &= ~PORT_LOGIC_LINK_WIDTH_MASK;
switch (pp->lanes) {
case 1:
val |= PORT_LOGIC_LINK_WIDTH_1_LANES;
break;
case 2:
val |= PORT_LOGIC_LINK_WIDTH_2_LANES;
break;
case 4:
val |= PORT_LOGIC_LINK_WIDTH_4_LANES;
break;
case 8:
val |= PORT_LOGIC_LINK_WIDTH_8_LANES;
break;
}
dw_pcie_writel_rc(pp, val, PCIE_LINK_WIDTH_SPEED_CONTROL);
/* setup RC BARs */
dw_pcie_writel_rc(pp, 0x00000004, PCI_BASE_ADDRESS_0);
dw_pcie_writel_rc(pp, 0x00000000, PCI_BASE_ADDRESS_1);
/* setup interrupt pins */
dw_pcie_readl_rc(pp, PCI_INTERRUPT_LINE, &val);
val &= 0xffff00ff;
val |= 0x00000100;
dw_pcie_writel_rc(pp, val, PCI_INTERRUPT_LINE);
/* setup bus numbers */
dw_pcie_readl_rc(pp, PCI_PRIMARY_BUS, &val);
val &= 0xff000000;
val |= 0x00010100;
dw_pcie_writel_rc(pp, val, PCI_PRIMARY_BUS);
/* setup memory base, memory limit */
membase = ((u32)pp->mem_base & 0xfff00000) >> 16;
memlimit = (pp->mem_size + (u32)pp->mem_base) & 0xfff00000;
val = memlimit | membase;
dw_pcie_writel_rc(pp, val, PCI_MEMORY_BASE);
/* setup command register */
dw_pcie_readl_rc(pp, PCI_COMMAND, &val);
val &= 0xffff0000;
val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
dw_pcie_writel_rc(pp, val, PCI_COMMAND);
}
MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
MODULE_DESCRIPTION("Designware PCIe host controller driver");
MODULE_LICENSE("GPL v2");