linux/drivers/media/dvb-core/demux.h

/*
 * demux.h
 *
 * Copyright (c) 2002 Convergence GmbH
 *
 * based on code:
 * Copyright (c) 2000 Nokia Research Center
 *                    Tampere, FINLAND
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public License
 * as published by the Free Software Foundation; either version 2.1
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 *
 */

#ifndef __DEMUX_H
#define __DEMUX_H

#include <linux/types.h>
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/time.h>
#include <linux/dvb/dmx.h>

/*--------------------------------------------------------------------------*/
/* Common definitions */
/*--------------------------------------------------------------------------*/

/*
 * DMX_MAX_FILTER_SIZE: Maximum length (in bytes) of a section/PES filter.
 */

#ifndef DMX_MAX_FILTER_SIZE
#define DMX_MAX_FILTER_SIZE 18
#endif

/*
 * DMX_MAX_SECFEED_SIZE: Maximum length (in bytes) of a private section feed filter.
 */

#ifndef DMX_MAX_SECTION_SIZE
#define DMX_MAX_SECTION_SIZE 4096
#endif
#ifndef DMX_MAX_SECFEED_SIZE
#define DMX_MAX_SECFEED_SIZE (DMX_MAX_SECTION_SIZE + 188)
#endif


/*
 * enum dmx_success: Success codes for the Demux Callback API.
 */

enum dmx_success {
  DMX_OK = 0, /* Received Ok */
  DMX_LENGTH_ERROR, /* Incorrect length */
  DMX_OVERRUN_ERROR, /* Receiver ring buffer overrun */
  DMX_CRC_ERROR, /* Incorrect CRC */
  DMX_FRAME_ERROR, /* Frame alignment error */
  DMX_FIFO_ERROR, /* Receiver FIFO overrun */
  DMX_MISSED_ERROR /* Receiver missed packet */
} ;

/*--------------------------------------------------------------------------*/
/* TS packet reception */
/*--------------------------------------------------------------------------*/

/* TS filter type for set() */

#define TS_PACKET       1   /* send TS packets (188 bytes) to callback (default) */
#define	TS_PAYLOAD_ONLY 2   /* in case TS_PACKET is set, only send the TS
			       payload (<=184 bytes per packet) to callback */
#define TS_DECODER      4   /* send stream to built-in decoder (if present) */
#define TS_DEMUX        8   /* in case TS_PACKET is set, send the TS to
			       the demux device, not to the dvr device */

struct dmx_ts_feed {
	int is_filtering; /* Set to non-zero when filtering in progress */
	struct dmx_demux *parent; /* Back-pointer */
	void *priv; /* Pointer to private data of the API client */
	int (*set) (struct dmx_ts_feed *feed,
		    u16 pid,
		    int type,
		    enum dmx_ts_pes pes_type,
		    size_t circular_buffer_size,
		    struct timespec timeout);
	int (*start_filtering) (struct dmx_ts_feed* feed);
	int (*stop_filtering) (struct dmx_ts_feed* feed);
};

/*--------------------------------------------------------------------------*/
/* Section reception */
/*--------------------------------------------------------------------------*/

struct dmx_section_filter {
	u8 filter_value [DMX_MAX_FILTER_SIZE];
	u8 filter_mask [DMX_MAX_FILTER_SIZE];
	u8 filter_mode [DMX_MAX_FILTER_SIZE];
	struct dmx_section_feed* parent; /* Back-pointer */
	void* priv; /* Pointer to private data of the API client */
};

struct dmx_section_feed {
	int is_filtering; /* Set to non-zero when filtering in progress */
	struct dmx_demux* parent; /* Back-pointer */
	void* priv; /* Pointer to private data of the API client */

	int check_crc;
	u32 crc_val;

	u8 *secbuf;
	u8 secbuf_base[DMX_MAX_SECFEED_SIZE];
	u16 secbufp, seclen, tsfeedp;

	int (*set) (struct dmx_section_feed* feed,
		    u16 pid,
		    size_t circular_buffer_size,
		    int check_crc);
	int (*allocate_filter) (struct dmx_section_feed* feed,
				struct dmx_section_filter** filter);
	int (*release_filter) (struct dmx_section_feed* feed,
			       struct dmx_section_filter* filter);
	int (*start_filtering) (struct dmx_section_feed* feed);
	int (*stop_filtering) (struct dmx_section_feed* feed);
};

/*--------------------------------------------------------------------------*/
/* Callback functions */
/*--------------------------------------------------------------------------*/

typedef int (*dmx_ts_cb) ( const u8 * buffer1,
			   size_t buffer1_length,
			   const u8 * buffer2,
			   size_t buffer2_length,
			   struct dmx_ts_feed* source,
			   enum dmx_success success);

typedef int (*dmx_section_cb) (	const u8 * buffer1,
				size_t buffer1_len,
				const u8 * buffer2,
				size_t buffer2_len,
				struct dmx_section_filter * source,
				enum dmx_success success);

/*--------------------------------------------------------------------------*/
/* DVB Front-End */
/*--------------------------------------------------------------------------*/

enum dmx_frontend_source {
	DMX_MEMORY_FE,
	DMX_FRONTEND_0,
	DMX_FRONTEND_1,
	DMX_FRONTEND_2,
	DMX_FRONTEND_3,
	DMX_STREAM_0,    /* external stream input, e.g. LVDS */
	DMX_STREAM_1,
	DMX_STREAM_2,
	DMX_STREAM_3
};

struct dmx_frontend {
	struct list_head connectivity_list; /* List of front-ends that can
					       be connected to a particular
					       demux */
	enum dmx_frontend_source source;
};

/*--------------------------------------------------------------------------*/
/* MPEG-2 TS Demux */
/*--------------------------------------------------------------------------*/

/*
 * Flags OR'ed in the capabilities field of struct dmx_demux.
 */

#define DMX_TS_FILTERING                        1
#define DMX_PES_FILTERING                       2
#define DMX_SECTION_FILTERING                   4
#define DMX_MEMORY_BASED_FILTERING              8    /* write() available */
#define DMX_CRC_CHECKING                        16
#define DMX_TS_DESCRAMBLING                     32

/*
 * Demux resource type identifier.
*/

/*
 * DMX_FE_ENTRY(): Casts elements in the list of registered
 * front-ends from the generic type struct list_head
 * to the type * struct dmx_frontend
 *.
*/

#define DMX_FE_ENTRY(list) list_entry(list, struct dmx_frontend, connectivity_list)

/**
 * struct dmx_demux - Structure that contains the demux capabilities and
 *		      callbacks.
 *
 * @capabilities: Bitfield of capability flags
 *
 * @frontend: Front-end connected to the demux
 *
 * @priv: Pointer to private data of the API client
 *
 * @open: This function reserves the demux for use by the caller and, if
 *	necessary, initializes the demux. When the demux is no longer needed,
 * 	the function close() should be called. It should be possible for
 *	multiple clients to access the demux at the same time. Thus, the
 *	function implementation should increment the demux usage count when
 *	open() is called and decrement it when close() is called.
 *	The @demux function parameter contains a pointer to the demux API and
 *	instance data.
 *	It returns
 *		0 on success;
 * 		-EUSERS, if maximum usage count was reached;
 *		-EINVAL, on bad parameter.
 *
 * @close: This function reserves the demux for use by the caller and, if
 *	necessary, initializes the demux. When the demux is no longer needed,
 *	the function close() should be called. It should be possible for
 *	multiple clients to access the demux at the same time. Thus, the
 *	function implementation should increment the demux usage count when
 *	open() is called and decrement it when close() is called.
 *	The @demux function parameter contains a pointer to the demux API and
 *	instance data.
 *	It returns
 *		0 on success;
 *		-ENODEV, if demux was not in use
 *		-EINVAL, on bad parameter.
 *
 * @write: This function provides the demux driver with a memory buffer
 *	containing TS packets. Instead of receiving TS packets from the DVB
 *	front-end, the demux driver software will read packets from memory.
 *	Any clients of this demux with active TS, PES or Section filters will
 *	receive filtered data via the Demux callback API (see 0). The function
 *	returns when all the data in the buffer has been consumed by the demux.
 *	Demux hardware typically cannot read TS from memory. If this is the
 *	case, memory-based filtering has to be implemented entirely in software.
 *	The @demux function parameter contains a pointer to the demux API and
 *	instance data.
 *	The @buf function parameter contains a pointer to the TS data in
 *	kernel-space memory.
 *	The @count function parameter contains the length of the TS data.
 *	It returns
 *		0 on success;
 *		-ENOSYS, if the command is not implemented;
 *		-EINVAL, on bad parameter.
 *
 * @allocate_ts_feed: Allocates a new TS feed, which is used to filter the TS
 *	packets carrying a certain PID. The TS feed normally corresponds to a
 *	hardware PID filter on the demux chip.
 *	The @demux function parameter contains a pointer to the demux API and
 *	instance data.
 *	The @feed function parameter contains a pointer to the TS feed API and
 *	instance data.
 *	The @callback function parameter contains a pointer to the callback
 *	function for passing received TS packet.
 *	It returns
 *		0 on success;
 *		-EBUSY, if no more TS feeds is available;
 *		-ENOSYS, if the command is not implemented;
 *		-EINVAL, on bad parameter.
 *
 * @release_ts_feed: Releases the resources allocated with allocate_ts_feed().
 *	Any filtering in progress on the TS feed should be stopped before
 *	calling this function.
 *	The @demux function parameter contains a pointer to the demux API and
 *	instance data.
 *	The @feed function parameter contains a pointer to the TS feed API and
 *	instance data.
 *	It returns
 *		0 on success;
 *		-EINVAL on bad parameter.
 *
 * @allocate_section_feed: Allocates a new section feed, i.e. a demux resource
 *	for filtering and receiving sections. On platforms with hardware
 *	support for section filtering, a section feed is directly mapped to
 *	the demux HW. On other platforms, TS packets are first PID filtered in
 *	hardware and a hardware section filter then emulated in software. The
 *	caller obtains an API pointer of type dmx_section_feed_t as an out
 *	parameter. Using this API the caller can set filtering parameters and
 *	start receiving sections.
 *	The @demux function parameter contains a pointer to the demux API and
 *	instance data.
 *	The @feed function parameter contains a pointer to the TS feed API and
 *	instance data.
 *	The @callback function parameter contains a pointer to the callback
 *	function for passing received TS packet.
 *	It returns
 *		0 on success;
 *		-EBUSY, if no more TS feeds is available;
 *		-ENOSYS, if the command is not implemented;
 *		-EINVAL, on bad parameter.
 *
 * @release_section_feed: Releases the resources allocated with
 *	allocate_section_feed(), including allocated filters. Any filtering in
 *	progress on the section feed should be stopped before calling this
 *	function.
 *	The @demux function parameter contains a pointer to the demux API and
 *	instance data.
 *	The @feed function parameter contains a pointer to the TS feed API and
 *	instance data.
 *	It returns
 *		0 on success;
 *		-EINVAL, on bad parameter.
 *
 * @add_frontend: Registers a connectivity between a demux and a front-end,
 *	i.e., indicates that the demux can be connected via a call to
 *	connect_frontend() to use the given front-end as a TS source. The
 *	client of this function has to allocate dynamic or static memory for
 *	the frontend structure and initialize its fields before calling this
 *	function. This function is normally called during the driver
 *	initialization. The caller must not free the memory of the frontend
 *	struct before successfully calling remove_frontend().
 *	The @demux function parameter contains a pointer to the demux API and
 *	instance data.
 *	The @frontend function parameter contains a pointer to the front-end
 *	instance data.
 *	It returns
 *		0 on success;
 *		-EEXIST, if a front-end with the same value of the id field
 *			already registered;
 * 		-EINUSE, if the demux is in use;
 *		-ENOMEM, if no more front-ends can be added;
 *		-EINVAL, on bad parameter.
 *
 * @remove_frontend: Indicates that the given front-end, registered by a call
 *	to add_frontend(), can no longer be connected as a TS source by this
 *	demux. The function should be called when a front-end driver or a demux
 *	driver is removed from the system. If the front-end is in use, the
 *	function fails with the return value of -EBUSY. After successfully
 *	calling this function, the caller can free the memory of the frontend
 *	struct if it was dynamically allocated before the add_frontend()
 *	operation.
 *	The @demux function parameter contains a pointer to the demux API and
 *	instance data.
 *	The @frontend function parameter contains a pointer to the front-end
 *	instance data.
 *	It returns
 *		0 on success;
 *		-EBUSY, if the front-end is in use, i.e. a call to
 *			connect_frontend() has not been followed by a call to
 *			disconnect_frontend();
 *		-EINVAL, on bad parameter.
 *
 * @get_frontends: Provides the APIs of the front-ends that have been
 *	registered for this demux. Any of the front-ends obtained with this
 *	call can be used as a parameter for connect_frontend(). The include
 *	file demux.h contains the macro DMX_FE_ENTRY() for converting an
 *	element of the generic type struct list_head* to the type
 * 	dmx_frontend_t*. The caller must not free the memory of any of the
 *	elements obtained via this function call.
 *	The @demux function parameter contains a pointer to the demux API and
 *	instance data.
 *	It returns a struct list_head pointer to the list of front-end
 *	interfaces, or NULL in the case of an empty list.
 *
 * @connect_frontend: Connects the TS output of the front-end to the input of
 *	the demux. A demux can only be connected to a front-end registered to
 *	the demux with the function add_frontend(). It may or may not be
 *	possible to connect multiple demuxes to the same front-end, depending
 *	on the capabilities of the HW platform. When not used, the front-end
 *	should be released by calling disconnect_frontend().
 *	The @demux function parameter contains a pointer to the demux API and
 *	instance data.
 *	The @frontend function parameter contains a pointer to the front-end
 *	instance data.
 *	It returns
 *		0 on success;
 *		-EBUSY, if the front-end is in use;
 *		-EINVAL, on bad parameter.
 *
 * @disconnect_frontend: Disconnects the demux and a front-end previously
 *	connected by a connect_frontend() call.
 *	The @demux function parameter contains a pointer to the demux API and
 *	instance data.
 *	It returns
 *		0 on success;
 *		-EINVAL on bad parameter.
 */

struct dmx_demux {
	u32 capabilities;
	struct dmx_frontend* frontend;
	void* priv;
	int (*open) (struct dmx_demux* demux);
	int (*close) (struct dmx_demux* demux);
	int (*write) (struct dmx_demux* demux, const char __user *buf, size_t count);
	int (*allocate_ts_feed) (struct dmx_demux* demux,
				 struct dmx_ts_feed** feed,
				 dmx_ts_cb callback);
	int (*release_ts_feed) (struct dmx_demux* demux,
				struct dmx_ts_feed* feed);
	int (*allocate_section_feed) (struct dmx_demux* demux,
				      struct dmx_section_feed** feed,
				      dmx_section_cb callback);
	int (*release_section_feed) (struct dmx_demux* demux,
				     struct dmx_section_feed* feed);
	int (*add_frontend) (struct dmx_demux* demux,
			     struct dmx_frontend* frontend);
	int (*remove_frontend) (struct dmx_demux* demux,
				struct dmx_frontend* frontend);
	struct list_head* (*get_frontends) (struct dmx_demux* demux);
	int (*connect_frontend) (struct dmx_demux* demux,
				 struct dmx_frontend* frontend);
	int (*disconnect_frontend) (struct dmx_demux* demux);

	int (*get_pes_pids) (struct dmx_demux* demux, u16 *pids);

	int (*get_caps) (struct dmx_demux* demux, struct dmx_caps *caps);

	int (*set_source) (struct dmx_demux* demux, const dmx_source_t *src);

	int (*get_stc) (struct dmx_demux* demux, unsigned int num,
			u64 *stc, unsigned int *base);
};

#endif /* #ifndef __DEMUX_H */