linux/tools/perf/util/machine.c

1825 lines
43 KiB
C
Raw Normal View History

#include "callchain.h"
#include "debug.h"
#include "event.h"
#include "evsel.h"
#include "hist.h"
#include "machine.h"
#include "map.h"
#include "sort.h"
#include "strlist.h"
#include "thread.h"
#include "vdso.h"
#include <stdbool.h>
#include <symbol/kallsyms.h>
#include "unwind.h"
perf callchain: Support handling complete branch stacks as histograms Currently branch stacks can be only shown as edge histograms for individual branches. I never found this display particularly useful. This implements an alternative mode that creates histograms over complete branch traces, instead of individual branches, similar to how normal callgraphs are handled. This is done by putting it in front of the normal callgraph and then using the normal callgraph histogram infrastructure to unify them. This way in complex functions we can understand the control flow that lead to a particular sample, and may even see some control flow in the caller for short functions. Example (simplified, of course for such simple code this is usually not needed), please run this after the whole patchkit is in, as at this point in the patch order there is no --branch-history, that will be added in a patch after this one: tcall.c: volatile a = 10000, b = 100000, c; __attribute__((noinline)) f2() { c = a / b; } __attribute__((noinline)) f1() { f2(); f2(); } main() { int i; for (i = 0; i < 1000000; i++) f1(); } % perf record -b -g ./tsrc/tcall [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.044 MB perf.data (~1923 samples) ] % perf report --no-children --branch-history ... 54.91% tcall.c:6 [.] f2 tcall | |--65.53%-- f2 tcall.c:5 | | | |--70.83%-- f1 tcall.c:11 | | f1 tcall.c:10 | | main tcall.c:18 | | main tcall.c:18 | | main tcall.c:17 | | main tcall.c:17 | | f1 tcall.c:13 | | f1 tcall.c:13 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:12 | | f1 tcall.c:12 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:11 | | | --29.17%-- f1 tcall.c:12 | f1 tcall.c:12 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:11 | f1 tcall.c:10 | main tcall.c:18 | main tcall.c:18 | main tcall.c:17 | main tcall.c:17 | f1 tcall.c:13 | f1 tcall.c:13 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:12 The default output is unchanged. This is only implemented in perf report, no change to record or anywhere else. This adds the basic code to report: - add a new "branch" option to the -g option parser to enable this mode - when the flag is set include the LBR into the callstack in machine.c. The rest of the history code is unchanged and doesn't know the difference between LBR entry and normal call entry. - detect overlaps with the callchain - remove small loop duplicates in the LBR Current limitations: - The LBR flags (mispredict etc.) are not shown in the history and LBR entries have no special marker. - It would be nice if annotate marked the LBR entries somehow (e.g. with arrows) v2: Various fixes. v3: Merge further patches into this one. Fix white space. v4: Improve manpage. Address review feedback. v5: Rename functions. Better error message without -g. Fix crash without -b. v6: Rebase v7: Rebase. Use NO_ENTRY in memset. v8: Port to latest tip. Move add_callchain_ip to separate patch. Skip initial entries in callchain. Minor cleanups. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-3-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-13 10:05:20 +08:00
#include "linux/hash.h"
static void machine__remove_thread(struct machine *machine, struct thread *th);
static void dsos__init(struct dsos *dsos)
{
INIT_LIST_HEAD(&dsos->head);
dsos->root = RB_ROOT;
}
int machine__init(struct machine *machine, const char *root_dir, pid_t pid)
{
map_groups__init(&machine->kmaps, machine);
RB_CLEAR_NODE(&machine->rb_node);
dsos__init(&machine->user_dsos);
dsos__init(&machine->kernel_dsos);
machine->threads = RB_ROOT;
INIT_LIST_HEAD(&machine->dead_threads);
machine->last_match = NULL;
machine->vdso_info = NULL;
machine->pid = pid;
machine->symbol_filter = NULL;
machine->id_hdr_size = 0;
machine->comm_exec = false;
machine->kernel_start = 0;
machine->root_dir = strdup(root_dir);
if (machine->root_dir == NULL)
return -ENOMEM;
if (pid != HOST_KERNEL_ID) {
struct thread *thread = machine__findnew_thread(machine, -1,
pid);
char comm[64];
if (thread == NULL)
return -ENOMEM;
snprintf(comm, sizeof(comm), "[guest/%d]", pid);
thread__set_comm(thread, comm, 0);
}
machine->current_tid = NULL;
return 0;
}
struct machine *machine__new_host(void)
{
struct machine *machine = malloc(sizeof(*machine));
if (machine != NULL) {
machine__init(machine, "", HOST_KERNEL_ID);
if (machine__create_kernel_maps(machine) < 0)
goto out_delete;
}
return machine;
out_delete:
free(machine);
return NULL;
}
static void dsos__delete(struct dsos *dsos)
{
struct dso *pos, *n;
list_for_each_entry_safe(pos, n, &dsos->head, node) {
perf symbols: Improve DSO long names lookup speed with rbtree With workload that spawns and destroys many threads and processes, it was found that perf-mem could took a long time to post-process the perf data after the target workload had completed its operation. The performance bottleneck was found to be the lookup and insertion of the new DSO structures (thousands of them in this case). In a dual-socket Ivy-Bridge E7-4890 v2 machine (30-core, 60-thread), the perf profile below shows what perf was doing after the profiled AIM7 shared workload completed: - 83.94% perf libc-2.11.3.so [.] __strcmp_sse42 - __strcmp_sse42 - 99.82% map__new machine__process_mmap_event perf_session_deliver_event perf_session__process_event __perf_session__process_events cmd_record cmd_mem run_builtin main __libc_start_main - 13.17% perf perf [.] __dsos__findnew __dsos__findnew map__new machine__process_mmap_event perf_session_deliver_event perf_session__process_event __perf_session__process_events cmd_record cmd_mem run_builtin main __libc_start_main So about 97% of CPU times were spent in the map__new() function trying to insert new DSO entry into the DSO linked list. The whole post-processing step took about 9 minutes. The DSO structures are currently searched linearly. So the total processing time will be proportional to n^2. To overcome this performance problem, the DSO code is modified to also put the DSO structures in a RB tree sorted by its long name in additional to being in a simple linked list. With this change, the processing time will become proportional to n*log(n) which will be much quicker for large n. However, the short name will still be searched using the old linear searching method. With that patch in place, the same perf-mem post-processing step took less than 30 seconds to complete. Signed-off-by: Waiman Long <Waiman.Long@hp.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Douglas Hatch <doug.hatch@hp.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Scott J Norton <scott.norton@hp.com> Link: http://lkml.kernel.org/r/1412098575-27863-3-git-send-email-Waiman.Long@hp.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-01 01:36:15 +08:00
RB_CLEAR_NODE(&pos->rb_node);
list_del(&pos->node);
dso__delete(pos);
}
}
void machine__delete_threads(struct machine *machine)
{
struct rb_node *nd = rb_first(&machine->threads);
while (nd) {
struct thread *t = rb_entry(nd, struct thread, rb_node);
nd = rb_next(nd);
machine__remove_thread(machine, t);
}
}
void machine__exit(struct machine *machine)
{
map_groups__exit(&machine->kmaps);
dsos__delete(&machine->user_dsos);
dsos__delete(&machine->kernel_dsos);
vdso__exit(machine);
zfree(&machine->root_dir);
zfree(&machine->current_tid);
}
void machine__delete(struct machine *machine)
{
machine__exit(machine);
free(machine);
}
void machines__init(struct machines *machines)
{
machine__init(&machines->host, "", HOST_KERNEL_ID);
machines->guests = RB_ROOT;
machines->symbol_filter = NULL;
}
void machines__exit(struct machines *machines)
{
machine__exit(&machines->host);
/* XXX exit guest */
}
struct machine *machines__add(struct machines *machines, pid_t pid,
const char *root_dir)
{
struct rb_node **p = &machines->guests.rb_node;
struct rb_node *parent = NULL;
struct machine *pos, *machine = malloc(sizeof(*machine));
if (machine == NULL)
return NULL;
if (machine__init(machine, root_dir, pid) != 0) {
free(machine);
return NULL;
}
machine->symbol_filter = machines->symbol_filter;
while (*p != NULL) {
parent = *p;
pos = rb_entry(parent, struct machine, rb_node);
if (pid < pos->pid)
p = &(*p)->rb_left;
else
p = &(*p)->rb_right;
}
rb_link_node(&machine->rb_node, parent, p);
rb_insert_color(&machine->rb_node, &machines->guests);
return machine;
}
void machines__set_symbol_filter(struct machines *machines,
symbol_filter_t symbol_filter)
{
struct rb_node *nd;
machines->symbol_filter = symbol_filter;
machines->host.symbol_filter = symbol_filter;
for (nd = rb_first(&machines->guests); nd; nd = rb_next(nd)) {
struct machine *machine = rb_entry(nd, struct machine, rb_node);
machine->symbol_filter = symbol_filter;
}
}
void machines__set_comm_exec(struct machines *machines, bool comm_exec)
{
struct rb_node *nd;
machines->host.comm_exec = comm_exec;
for (nd = rb_first(&machines->guests); nd; nd = rb_next(nd)) {
struct machine *machine = rb_entry(nd, struct machine, rb_node);
machine->comm_exec = comm_exec;
}
}
struct machine *machines__find(struct machines *machines, pid_t pid)
{
struct rb_node **p = &machines->guests.rb_node;
struct rb_node *parent = NULL;
struct machine *machine;
struct machine *default_machine = NULL;
if (pid == HOST_KERNEL_ID)
return &machines->host;
while (*p != NULL) {
parent = *p;
machine = rb_entry(parent, struct machine, rb_node);
if (pid < machine->pid)
p = &(*p)->rb_left;
else if (pid > machine->pid)
p = &(*p)->rb_right;
else
return machine;
if (!machine->pid)
default_machine = machine;
}
return default_machine;
}
struct machine *machines__findnew(struct machines *machines, pid_t pid)
{
char path[PATH_MAX];
const char *root_dir = "";
struct machine *machine = machines__find(machines, pid);
if (machine && (machine->pid == pid))
goto out;
if ((pid != HOST_KERNEL_ID) &&
(pid != DEFAULT_GUEST_KERNEL_ID) &&
(symbol_conf.guestmount)) {
sprintf(path, "%s/%d", symbol_conf.guestmount, pid);
if (access(path, R_OK)) {
static struct strlist *seen;
if (!seen)
seen = strlist__new(true, NULL);
if (!strlist__has_entry(seen, path)) {
pr_err("Can't access file %s\n", path);
strlist__add(seen, path);
}
machine = NULL;
goto out;
}
root_dir = path;
}
machine = machines__add(machines, pid, root_dir);
out:
return machine;
}
void machines__process_guests(struct machines *machines,
machine__process_t process, void *data)
{
struct rb_node *nd;
for (nd = rb_first(&machines->guests); nd; nd = rb_next(nd)) {
struct machine *pos = rb_entry(nd, struct machine, rb_node);
process(pos, data);
}
}
char *machine__mmap_name(struct machine *machine, char *bf, size_t size)
{
if (machine__is_host(machine))
snprintf(bf, size, "[%s]", "kernel.kallsyms");
else if (machine__is_default_guest(machine))
snprintf(bf, size, "[%s]", "guest.kernel.kallsyms");
else {
snprintf(bf, size, "[%s.%d]", "guest.kernel.kallsyms",
machine->pid);
}
return bf;
}
void machines__set_id_hdr_size(struct machines *machines, u16 id_hdr_size)
{
struct rb_node *node;
struct machine *machine;
machines->host.id_hdr_size = id_hdr_size;
for (node = rb_first(&machines->guests); node; node = rb_next(node)) {
machine = rb_entry(node, struct machine, rb_node);
machine->id_hdr_size = id_hdr_size;
}
return;
}
static void machine__update_thread_pid(struct machine *machine,
struct thread *th, pid_t pid)
{
struct thread *leader;
if (pid == th->pid_ || pid == -1 || th->pid_ != -1)
return;
th->pid_ = pid;
if (th->pid_ == th->tid)
return;
leader = machine__findnew_thread(machine, th->pid_, th->pid_);
if (!leader)
goto out_err;
if (!leader->mg)
leader->mg = map_groups__new(machine);
if (!leader->mg)
goto out_err;
if (th->mg == leader->mg)
return;
if (th->mg) {
/*
* Maps are created from MMAP events which provide the pid and
* tid. Consequently there never should be any maps on a thread
* with an unknown pid. Just print an error if there are.
*/
if (!map_groups__empty(th->mg))
pr_err("Discarding thread maps for %d:%d\n",
th->pid_, th->tid);
map_groups__delete(th->mg);
}
th->mg = map_groups__get(leader->mg);
return;
out_err:
pr_err("Failed to join map groups for %d:%d\n", th->pid_, th->tid);
}
static struct thread *__machine__findnew_thread(struct machine *machine,
pid_t pid, pid_t tid,
bool create)
{
struct rb_node **p = &machine->threads.rb_node;
struct rb_node *parent = NULL;
struct thread *th;
/*
* Front-end cache - TID lookups come in blocks,
* so most of the time we dont have to look up
* the full rbtree:
*/
th = machine->last_match;
if (th != NULL) {
if (th->tid == tid) {
machine__update_thread_pid(machine, th, pid);
return th;
}
thread__zput(machine->last_match);
}
while (*p != NULL) {
parent = *p;
th = rb_entry(parent, struct thread, rb_node);
if (th->tid == tid) {
machine->last_match = thread__get(th);
machine__update_thread_pid(machine, th, pid);
return th;
}
if (tid < th->tid)
p = &(*p)->rb_left;
else
p = &(*p)->rb_right;
}
if (!create)
return NULL;
th = thread__new(pid, tid);
if (th != NULL) {
rb_link_node(&th->rb_node, parent, p);
rb_insert_color(&th->rb_node, &machine->threads);
/*
* We have to initialize map_groups separately
* after rb tree is updated.
*
* The reason is that we call machine__findnew_thread
* within thread__init_map_groups to find the thread
* leader and that would screwed the rb tree.
*/
if (thread__init_map_groups(th, machine)) {
rb_erase(&th->rb_node, &machine->threads);
thread__delete(th);
return NULL;
}
/*
* It is now in the rbtree, get a ref
*/
thread__get(th);
machine->last_match = thread__get(th);
}
return th;
}
struct thread *machine__findnew_thread(struct machine *machine, pid_t pid,
pid_t tid)
{
return __machine__findnew_thread(machine, pid, tid, true);
}
struct thread *machine__find_thread(struct machine *machine, pid_t pid,
pid_t tid)
{
return __machine__findnew_thread(machine, pid, tid, false);
}
struct comm *machine__thread_exec_comm(struct machine *machine,
struct thread *thread)
{
if (machine->comm_exec)
return thread__exec_comm(thread);
else
return thread__comm(thread);
}
int machine__process_comm_event(struct machine *machine, union perf_event *event,
struct perf_sample *sample)
{
struct thread *thread = machine__findnew_thread(machine,
event->comm.pid,
event->comm.tid);
bool exec = event->header.misc & PERF_RECORD_MISC_COMM_EXEC;
if (exec)
machine->comm_exec = true;
if (dump_trace)
perf_event__fprintf_comm(event, stdout);
if (thread == NULL ||
__thread__set_comm(thread, event->comm.comm, sample->time, exec)) {
dump_printf("problem processing PERF_RECORD_COMM, skipping event.\n");
return -1;
}
return 0;
}
int machine__process_lost_event(struct machine *machine __maybe_unused,
union perf_event *event, struct perf_sample *sample __maybe_unused)
{
dump_printf(": id:%" PRIu64 ": lost:%" PRIu64 "\n",
event->lost.id, event->lost.lost);
return 0;
}
static struct dso*
machine__module_dso(struct machine *machine, struct kmod_path *m,
const char *filename)
{
struct dso *dso;
dso = dsos__find(&machine->kernel_dsos, m->name, true);
if (!dso) {
dso = dsos__addnew(&machine->kernel_dsos, m->name);
if (dso == NULL)
return NULL;
if (machine__is_host(machine))
dso->symtab_type = DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE;
else
dso->symtab_type = DSO_BINARY_TYPE__GUEST_KMODULE;
/* _KMODULE_COMP should be next to _KMODULE */
if (m->kmod && m->comp)
dso->symtab_type++;
dso__set_short_name(dso, strdup(m->name), true);
dso__set_long_name(dso, strdup(filename), true);
}
return dso;
}
struct map *machine__new_module(struct machine *machine, u64 start,
const char *filename)
{
struct map *map = NULL;
struct dso *dso;
struct kmod_path m;
if (kmod_path__parse_name(&m, filename))
return NULL;
dso = machine__module_dso(machine, &m, filename);
if (dso == NULL)
goto out;
map = map__new2(start, dso, MAP__FUNCTION);
if (map == NULL)
goto out;
map_groups__insert(&machine->kmaps, map);
out:
free(m.name);
return map;
}
size_t machines__fprintf_dsos(struct machines *machines, FILE *fp)
{
struct rb_node *nd;
size_t ret = __dsos__fprintf(&machines->host.kernel_dsos.head, fp) +
__dsos__fprintf(&machines->host.user_dsos.head, fp);
for (nd = rb_first(&machines->guests); nd; nd = rb_next(nd)) {
struct machine *pos = rb_entry(nd, struct machine, rb_node);
ret += __dsos__fprintf(&pos->kernel_dsos.head, fp);
ret += __dsos__fprintf(&pos->user_dsos.head, fp);
}
return ret;
}
size_t machine__fprintf_dsos_buildid(struct machine *m, FILE *fp,
bool (skip)(struct dso *dso, int parm), int parm)
{
return __dsos__fprintf_buildid(&m->kernel_dsos.head, fp, skip, parm) +
__dsos__fprintf_buildid(&m->user_dsos.head, fp, skip, parm);
}
size_t machines__fprintf_dsos_buildid(struct machines *machines, FILE *fp,
bool (skip)(struct dso *dso, int parm), int parm)
{
struct rb_node *nd;
size_t ret = machine__fprintf_dsos_buildid(&machines->host, fp, skip, parm);
for (nd = rb_first(&machines->guests); nd; nd = rb_next(nd)) {
struct machine *pos = rb_entry(nd, struct machine, rb_node);
ret += machine__fprintf_dsos_buildid(pos, fp, skip, parm);
}
return ret;
}
size_t machine__fprintf_vmlinux_path(struct machine *machine, FILE *fp)
{
int i;
size_t printed = 0;
struct dso *kdso = machine->vmlinux_maps[MAP__FUNCTION]->dso;
if (kdso->has_build_id) {
char filename[PATH_MAX];
if (dso__build_id_filename(kdso, filename, sizeof(filename)))
printed += fprintf(fp, "[0] %s\n", filename);
}
for (i = 0; i < vmlinux_path__nr_entries; ++i)
printed += fprintf(fp, "[%d] %s\n",
i + kdso->has_build_id, vmlinux_path[i]);
return printed;
}
size_t machine__fprintf(struct machine *machine, FILE *fp)
{
size_t ret = 0;
struct rb_node *nd;
for (nd = rb_first(&machine->threads); nd; nd = rb_next(nd)) {
struct thread *pos = rb_entry(nd, struct thread, rb_node);
ret += thread__fprintf(pos, fp);
}
return ret;
}
static struct dso *machine__get_kernel(struct machine *machine)
{
const char *vmlinux_name = NULL;
struct dso *kernel;
if (machine__is_host(machine)) {
vmlinux_name = symbol_conf.vmlinux_name;
if (!vmlinux_name)
vmlinux_name = "[kernel.kallsyms]";
kernel = dso__kernel_findnew(machine, vmlinux_name,
"[kernel]",
DSO_TYPE_KERNEL);
} else {
char bf[PATH_MAX];
if (machine__is_default_guest(machine))
vmlinux_name = symbol_conf.default_guest_vmlinux_name;
if (!vmlinux_name)
vmlinux_name = machine__mmap_name(machine, bf,
sizeof(bf));
kernel = dso__kernel_findnew(machine, vmlinux_name,
"[guest.kernel]",
DSO_TYPE_GUEST_KERNEL);
}
if (kernel != NULL && (!kernel->has_build_id))
dso__read_running_kernel_build_id(kernel, machine);
return kernel;
}
struct process_args {
u64 start;
};
static void machine__get_kallsyms_filename(struct machine *machine, char *buf,
size_t bufsz)
{
if (machine__is_default_guest(machine))
scnprintf(buf, bufsz, "%s", symbol_conf.default_guest_kallsyms);
else
scnprintf(buf, bufsz, "%s/proc/kallsyms", machine->root_dir);
}
const char *ref_reloc_sym_names[] = {"_text", "_stext", NULL};
/* Figure out the start address of kernel map from /proc/kallsyms.
* Returns the name of the start symbol in *symbol_name. Pass in NULL as
* symbol_name if it's not that important.
*/
static u64 machine__get_running_kernel_start(struct machine *machine,
const char **symbol_name)
{
char filename[PATH_MAX];
int i;
const char *name;
u64 addr = 0;
machine__get_kallsyms_filename(machine, filename, PATH_MAX);
if (symbol__restricted_filename(filename, "/proc/kallsyms"))
return 0;
for (i = 0; (name = ref_reloc_sym_names[i]) != NULL; i++) {
addr = kallsyms__get_function_start(filename, name);
if (addr)
break;
}
if (symbol_name)
*symbol_name = name;
return addr;
}
int __machine__create_kernel_maps(struct machine *machine, struct dso *kernel)
{
enum map_type type;
u64 start = machine__get_running_kernel_start(machine, NULL);
for (type = 0; type < MAP__NR_TYPES; ++type) {
struct kmap *kmap;
machine->vmlinux_maps[type] = map__new2(start, kernel, type);
if (machine->vmlinux_maps[type] == NULL)
return -1;
machine->vmlinux_maps[type]->map_ip =
machine->vmlinux_maps[type]->unmap_ip =
identity__map_ip;
kmap = map__kmap(machine->vmlinux_maps[type]);
kmap->kmaps = &machine->kmaps;
map_groups__insert(&machine->kmaps,
machine->vmlinux_maps[type]);
}
return 0;
}
void machine__destroy_kernel_maps(struct machine *machine)
{
enum map_type type;
for (type = 0; type < MAP__NR_TYPES; ++type) {
struct kmap *kmap;
if (machine->vmlinux_maps[type] == NULL)
continue;
kmap = map__kmap(machine->vmlinux_maps[type]);
map_groups__remove(&machine->kmaps,
machine->vmlinux_maps[type]);
if (kmap->ref_reloc_sym) {
/*
* ref_reloc_sym is shared among all maps, so free just
* on one of them.
*/
if (type == MAP__FUNCTION) {
zfree((char **)&kmap->ref_reloc_sym->name);
zfree(&kmap->ref_reloc_sym);
} else
kmap->ref_reloc_sym = NULL;
}
map__delete(machine->vmlinux_maps[type]);
machine->vmlinux_maps[type] = NULL;
}
}
int machines__create_guest_kernel_maps(struct machines *machines)
{
int ret = 0;
struct dirent **namelist = NULL;
int i, items = 0;
char path[PATH_MAX];
pid_t pid;
char *endp;
if (symbol_conf.default_guest_vmlinux_name ||
symbol_conf.default_guest_modules ||
symbol_conf.default_guest_kallsyms) {
machines__create_kernel_maps(machines, DEFAULT_GUEST_KERNEL_ID);
}
if (symbol_conf.guestmount) {
items = scandir(symbol_conf.guestmount, &namelist, NULL, NULL);
if (items <= 0)
return -ENOENT;
for (i = 0; i < items; i++) {
if (!isdigit(namelist[i]->d_name[0])) {
/* Filter out . and .. */
continue;
}
pid = (pid_t)strtol(namelist[i]->d_name, &endp, 10);
if ((*endp != '\0') ||
(endp == namelist[i]->d_name) ||
(errno == ERANGE)) {
pr_debug("invalid directory (%s). Skipping.\n",
namelist[i]->d_name);
continue;
}
sprintf(path, "%s/%s/proc/kallsyms",
symbol_conf.guestmount,
namelist[i]->d_name);
ret = access(path, R_OK);
if (ret) {
pr_debug("Can't access file %s\n", path);
goto failure;
}
machines__create_kernel_maps(machines, pid);
}
failure:
free(namelist);
}
return ret;
}
void machines__destroy_kernel_maps(struct machines *machines)
{
struct rb_node *next = rb_first(&machines->guests);
machine__destroy_kernel_maps(&machines->host);
while (next) {
struct machine *pos = rb_entry(next, struct machine, rb_node);
next = rb_next(&pos->rb_node);
rb_erase(&pos->rb_node, &machines->guests);
machine__delete(pos);
}
}
int machines__create_kernel_maps(struct machines *machines, pid_t pid)
{
struct machine *machine = machines__findnew(machines, pid);
if (machine == NULL)
return -1;
return machine__create_kernel_maps(machine);
}
int machine__load_kallsyms(struct machine *machine, const char *filename,
enum map_type type, symbol_filter_t filter)
{
struct map *map = machine->vmlinux_maps[type];
int ret = dso__load_kallsyms(map->dso, filename, map, filter);
if (ret > 0) {
dso__set_loaded(map->dso, type);
/*
* Since /proc/kallsyms will have multiple sessions for the
* kernel, with modules between them, fixup the end of all
* sections.
*/
__map_groups__fixup_end(&machine->kmaps, type);
}
return ret;
}
int machine__load_vmlinux_path(struct machine *machine, enum map_type type,
symbol_filter_t filter)
{
struct map *map = machine->vmlinux_maps[type];
int ret = dso__load_vmlinux_path(map->dso, map, filter);
if (ret > 0)
dso__set_loaded(map->dso, type);
return ret;
}
static void map_groups__fixup_end(struct map_groups *mg)
{
int i;
for (i = 0; i < MAP__NR_TYPES; ++i)
__map_groups__fixup_end(mg, i);
}
static char *get_kernel_version(const char *root_dir)
{
char version[PATH_MAX];
FILE *file;
char *name, *tmp;
const char *prefix = "Linux version ";
sprintf(version, "%s/proc/version", root_dir);
file = fopen(version, "r");
if (!file)
return NULL;
version[0] = '\0';
tmp = fgets(version, sizeof(version), file);
fclose(file);
name = strstr(version, prefix);
if (!name)
return NULL;
name += strlen(prefix);
tmp = strchr(name, ' ');
if (tmp)
*tmp = '\0';
return strdup(name);
}
static int map_groups__set_modules_path_dir(struct map_groups *mg,
const char *dir_name, int depth)
{
struct dirent *dent;
DIR *dir = opendir(dir_name);
int ret = 0;
if (!dir) {
pr_debug("%s: cannot open %s dir\n", __func__, dir_name);
return -1;
}
while ((dent = readdir(dir)) != NULL) {
char path[PATH_MAX];
struct stat st;
/*sshfs might return bad dent->d_type, so we have to stat*/
snprintf(path, sizeof(path), "%s/%s", dir_name, dent->d_name);
if (stat(path, &st))
continue;
if (S_ISDIR(st.st_mode)) {
if (!strcmp(dent->d_name, ".") ||
!strcmp(dent->d_name, ".."))
continue;
/* Do not follow top-level source and build symlinks */
if (depth == 0) {
if (!strcmp(dent->d_name, "source") ||
!strcmp(dent->d_name, "build"))
continue;
}
ret = map_groups__set_modules_path_dir(mg, path,
depth + 1);
if (ret < 0)
goto out;
} else {
char *dot = strrchr(dent->d_name, '.'),
dso_name[PATH_MAX];
struct map *map;
char *long_name;
if (dot == NULL)
continue;
/* On some system, modules are compressed like .ko.gz */
if (is_supported_compression(dot + 1) &&
is_kmodule_extension(dot - 2))
dot -= 3;
snprintf(dso_name, sizeof(dso_name), "[%.*s]",
(int)(dot - dent->d_name), dent->d_name);
strxfrchar(dso_name, '-', '_');
map = map_groups__find_by_name(mg, MAP__FUNCTION,
dso_name);
if (map == NULL)
continue;
long_name = strdup(path);
if (long_name == NULL) {
ret = -1;
goto out;
}
dso__set_long_name(map->dso, long_name, true);
dso__kernel_module_get_build_id(map->dso, "");
}
}
out:
closedir(dir);
return ret;
}
static int machine__set_modules_path(struct machine *machine)
{
char *version;
char modules_path[PATH_MAX];
version = get_kernel_version(machine->root_dir);
if (!version)
return -1;
snprintf(modules_path, sizeof(modules_path), "%s/lib/modules/%s",
machine->root_dir, version);
free(version);
return map_groups__set_modules_path_dir(&machine->kmaps, modules_path, 0);
}
static int machine__create_module(void *arg, const char *name, u64 start)
{
struct machine *machine = arg;
struct map *map;
map = machine__new_module(machine, start, name);
if (map == NULL)
return -1;
dso__kernel_module_get_build_id(map->dso, machine->root_dir);
return 0;
}
static int machine__create_modules(struct machine *machine)
{
const char *modules;
char path[PATH_MAX];
if (machine__is_default_guest(machine)) {
modules = symbol_conf.default_guest_modules;
} else {
snprintf(path, PATH_MAX, "%s/proc/modules", machine->root_dir);
modules = path;
}
if (symbol__restricted_filename(modules, "/proc/modules"))
return -1;
if (modules__parse(modules, machine, machine__create_module))
return -1;
if (!machine__set_modules_path(machine))
return 0;
pr_debug("Problems setting modules path maps, continuing anyway...\n");
return 0;
}
int machine__create_kernel_maps(struct machine *machine)
{
struct dso *kernel = machine__get_kernel(machine);
const char *name;
u64 addr = machine__get_running_kernel_start(machine, &name);
if (!addr)
return -1;
if (kernel == NULL ||
__machine__create_kernel_maps(machine, kernel) < 0)
return -1;
if (symbol_conf.use_modules && machine__create_modules(machine) < 0) {
if (machine__is_host(machine))
pr_debug("Problems creating module maps, "
"continuing anyway...\n");
else
pr_debug("Problems creating module maps for guest %d, "
"continuing anyway...\n", machine->pid);
}
/*
* Now that we have all the maps created, just set the ->end of them:
*/
map_groups__fixup_end(&machine->kmaps);
if (maps__set_kallsyms_ref_reloc_sym(machine->vmlinux_maps, name,
addr)) {
machine__destroy_kernel_maps(machine);
return -1;
}
return 0;
}
static void machine__set_kernel_mmap_len(struct machine *machine,
union perf_event *event)
{
int i;
for (i = 0; i < MAP__NR_TYPES; i++) {
machine->vmlinux_maps[i]->start = event->mmap.start;
machine->vmlinux_maps[i]->end = (event->mmap.start +
event->mmap.len);
/*
* Be a bit paranoid here, some perf.data file came with
* a zero sized synthesized MMAP event for the kernel.
*/
if (machine->vmlinux_maps[i]->end == 0)
machine->vmlinux_maps[i]->end = ~0ULL;
}
}
static bool machine__uses_kcore(struct machine *machine)
{
struct dso *dso;
list_for_each_entry(dso, &machine->kernel_dsos.head, node) {
if (dso__is_kcore(dso))
return true;
}
return false;
}
static int machine__process_kernel_mmap_event(struct machine *machine,
union perf_event *event)
{
struct map *map;
char kmmap_prefix[PATH_MAX];
enum dso_kernel_type kernel_type;
bool is_kernel_mmap;
/* If we have maps from kcore then we do not need or want any others */
if (machine__uses_kcore(machine))
return 0;
machine__mmap_name(machine, kmmap_prefix, sizeof(kmmap_prefix));
if (machine__is_host(machine))
kernel_type = DSO_TYPE_KERNEL;
else
kernel_type = DSO_TYPE_GUEST_KERNEL;
is_kernel_mmap = memcmp(event->mmap.filename,
kmmap_prefix,
strlen(kmmap_prefix) - 1) == 0;
if (event->mmap.filename[0] == '/' ||
(!is_kernel_mmap && event->mmap.filename[0] == '[')) {
map = machine__new_module(machine, event->mmap.start,
event->mmap.filename);
if (map == NULL)
goto out_problem;
map->end = map->start + event->mmap.len;
} else if (is_kernel_mmap) {
const char *symbol_name = (event->mmap.filename +
strlen(kmmap_prefix));
/*
* Should be there already, from the build-id table in
* the header.
*/
perf tools: Fix build-id matching on vmlinux There's a problem on finding correct kernel symbols when perf report runs on a different kernel. Although a part of the problem was solved by the prior commit 0a7e6d1b6844 ("perf tools: Check recorded kernel version when finding vmlinux"), there's a remaining problem still. When perf records samples, it synthesizes the kernel map using machine__mmap_name() and ref_reloc_sym like "[kernel.kallsyms]_text". You can easily see it using 'perf report -D' command. After finishing record, it goes through the recorded events to find maps/dsos actually used. And then record build-id info of them. During this process, it needs to load symbols in a dso and it'd call dso__load_vmlinux_path() since the default value of the symbol_conf. try_vmlinux_path is true. However it changes dso->long_name to a real path of the vmlinux file (e.g. /lib/modules/3.16.4/build/vmlinux) if one is running on a custom kernel. It resulted in that perf report reads the build-id of the vmlinux, but cannot use it since it only knows about the [kernel.kallsyms] map. It then falls back to possible vmlinux paths by using the recorded kernel version (in case of a recent version) or a running kernel silently. Even with the recent tools, this still has a possibility of breaking the result. As the build directory is a symbolic link, if one built a new kernel in the same directory with different source/config, the old link to vmlinux will point the new file. So it's absolutely needed to use build-id when finding a kernel image. In this patch, it's now changed to try to search a kernel dso in the existing dso list which was constructed during build-id table parsing so it'll always have a build-id. If not found, search "[kernel.kallsyms]". Before: $ perf report # Children Self Command Shared Object Symbol # ........ ........ ....... ................. ............................... # 72.15% 0.00% swapper [kernel.kallsyms] [k] set_curr_task_rt 72.15% 0.00% swapper [kernel.kallsyms] [k] native_calibrate_tsc 72.15% 0.00% swapper [kernel.kallsyms] [k] tsc_refine_calibration_work 71.87% 71.87% swapper [kernel.kallsyms] [k] module_finalize ... After (for the same perf.data): 72.15% 0.00% swapper vmlinux [k] cpu_startup_entry 72.15% 0.00% swapper vmlinux [k] arch_cpu_idle 72.15% 0.00% swapper vmlinux [k] default_idle 71.87% 71.87% swapper vmlinux [k] native_safe_halt ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/20140924073356.GB1962@gmail.com Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1415063674-17206-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-04 09:14:33 +08:00
struct dso *kernel = NULL;
struct dso *dso;
list_for_each_entry(dso, &machine->kernel_dsos.head, node) {
if (is_kernel_module(dso->long_name, NULL))
continue;
kernel = dso;
break;
}
if (kernel == NULL)
kernel = __dsos__findnew(&machine->kernel_dsos,
kmmap_prefix);
if (kernel == NULL)
goto out_problem;
kernel->kernel = kernel_type;
if (__machine__create_kernel_maps(machine, kernel) < 0)
goto out_problem;
if (strstr(kernel->long_name, "vmlinux"))
dso__set_short_name(kernel, "[kernel.vmlinux]", false);
perf tools: Make vmlinux short name more like kallsyms short name The previous patch changed kernel dso name from '[kernel.kallsyms]' to vmlinux. However it might add confusion to old users accustomed to the old name. So change the short name to '[kernel.vmlinux]' to reduce such confusion. Before: # Overhead Command Shared Object Symbol # ........ .............. ....................... ............................... # 9.83% swapper vmlinux [k] intel_idle 4.10% awk libc-2.20.so [.] __strcmp_sse2 1.86% sed libc-2.20.so [.] __strcmp_sse2 1.78% netctl-auto libc-2.20.so [.] __strcmp_sse2 1.23% netctl-auto libc-2.20.so [.] __mbrtowc 1.21% firefox libxul.so [.] 0x00000000024b62bd 1.20% swapper vmlinux [k] cpuidle_enter_state 1.03% sleep vmlinux [k] copy_user_generic_unrolled After: # Overhead Command Shared Object Symbol # ........ .............. ....................... ............................... # 9.83% swapper [kernel.vmlinux] [k] intel_idle 4.10% awk libc-2.20.so [.] __strcmp_sse2 1.86% sed libc-2.20.so [.] __strcmp_sse2 1.78% netctl-auto libc-2.20.so [.] __strcmp_sse2 1.23% netctl-auto libc-2.20.so [.] __mbrtowc 1.21% firefox libxul.so [.] 0x00000000024b62bd 1.20% swapper [kernel.vmlinux] [k] cpuidle_enter_state 1.03% sleep [kernel.vmlinux] [k] copy_user_generic_unrolled Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1415063674-17206-9-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-04 09:14:34 +08:00
machine__set_kernel_mmap_len(machine, event);
/*
* Avoid using a zero address (kptr_restrict) for the ref reloc
* symbol. Effectively having zero here means that at record
* time /proc/sys/kernel/kptr_restrict was non zero.
*/
if (event->mmap.pgoff != 0) {
maps__set_kallsyms_ref_reloc_sym(machine->vmlinux_maps,
symbol_name,
event->mmap.pgoff);
}
if (machine__is_default_guest(machine)) {
/*
* preload dso of guest kernel and modules
*/
dso__load(kernel, machine->vmlinux_maps[MAP__FUNCTION],
NULL);
}
}
return 0;
out_problem:
return -1;
}
int machine__process_mmap2_event(struct machine *machine,
union perf_event *event,
struct perf_sample *sample __maybe_unused)
{
u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
struct thread *thread;
struct map *map;
enum map_type type;
int ret = 0;
if (dump_trace)
perf_event__fprintf_mmap2(event, stdout);
if (cpumode == PERF_RECORD_MISC_GUEST_KERNEL ||
cpumode == PERF_RECORD_MISC_KERNEL) {
ret = machine__process_kernel_mmap_event(machine, event);
if (ret < 0)
goto out_problem;
return 0;
}
thread = machine__findnew_thread(machine, event->mmap2.pid,
event->mmap2.tid);
if (thread == NULL)
goto out_problem;
if (event->header.misc & PERF_RECORD_MISC_MMAP_DATA)
type = MAP__VARIABLE;
else
type = MAP__FUNCTION;
map = map__new(machine, event->mmap2.start,
event->mmap2.len, event->mmap2.pgoff,
event->mmap2.pid, event->mmap2.maj,
event->mmap2.min, event->mmap2.ino,
event->mmap2.ino_generation,
event->mmap2.prot,
event->mmap2.flags,
event->mmap2.filename, type, thread);
if (map == NULL)
goto out_problem;
thread__insert_map(thread, map);
return 0;
out_problem:
dump_printf("problem processing PERF_RECORD_MMAP2, skipping event.\n");
return 0;
}
int machine__process_mmap_event(struct machine *machine, union perf_event *event,
struct perf_sample *sample __maybe_unused)
{
u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
struct thread *thread;
struct map *map;
enum map_type type;
int ret = 0;
if (dump_trace)
perf_event__fprintf_mmap(event, stdout);
if (cpumode == PERF_RECORD_MISC_GUEST_KERNEL ||
cpumode == PERF_RECORD_MISC_KERNEL) {
ret = machine__process_kernel_mmap_event(machine, event);
if (ret < 0)
goto out_problem;
return 0;
}
thread = machine__findnew_thread(machine, event->mmap.pid,
event->mmap.tid);
if (thread == NULL)
goto out_problem;
if (event->header.misc & PERF_RECORD_MISC_MMAP_DATA)
type = MAP__VARIABLE;
else
type = MAP__FUNCTION;
map = map__new(machine, event->mmap.start,
event->mmap.len, event->mmap.pgoff,
event->mmap.pid, 0, 0, 0, 0, 0, 0,
event->mmap.filename,
type, thread);
if (map == NULL)
goto out_problem;
thread__insert_map(thread, map);
return 0;
out_problem:
dump_printf("problem processing PERF_RECORD_MMAP, skipping event.\n");
return 0;
}
perf tools: Sample after exit loses thread correlation Occassionally events (e.g., context-switch, sched tracepoints) are losing the conversion of sample data associated with a thread. For example: $ perf record -e sched:sched_switch -c 1 -a -- sleep 5 $ perf script <selected events shown> ls 30482 [000] 1379727.583037: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.586339: sched:sched_switch: prev_comm=ls prev_pid=30482 ... :30482 30482 [000] 1379727.589462: sched:sched_switch: prev_comm=ls prev_pid=30482 ... The last line lost the conversion from tid to comm. If you look at the events (perf script -D) you see why - a SAMPLE event is generated after the EXIT: 0 1379727589449774 0x1540b0 [0x38]: PERF_RECORD_EXIT(30482:30482):(30482:30482) 0 1379727589462497 0x1540e8 [0x80]: PERF_RECORD_SAMPLE(IP, 1): 30482/30482: 0xffffffff816416f1 period: 1 addr: 0 ... thread: :30482:30482 When perf processes the EXIT event the thread is moved to the dead_threads list. When the SAMPLE event is processed no thread exists for the pid so a new one is created by machine__findnew_thread. This patch address the problem by delaying the move to the dead_threads list until the tid is re-used (per Adrian's suggestion). With this patch we get the previous example shows: ls 30482 [000] 1379727.583037: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.586339: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.589462: sched:sched_switch: prev_comm=ls prev_pid=30482 ... and 0 1379727589449774 0x1540b0 [0x38]: PERF_RECORD_EXIT(30482:30482):(30482:30482) 0 1379727589462497 0x1540e8 [0x80]: PERF_RECORD_SAMPLE(IP, 1): 30482/30482: 0xffffffff816416f1 period: 1 addr: 0 ... thread: ls:30482 v4: per Arnaldo's request add dead flag to thread struct and set when task exits v3: re-do from a time based check to a delayed move to dead_threads list v2: Rebased to latest perf/core branch. Changed time comparison to use a macro which explicitly shows the time basis Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1376491767-84171-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-14 22:49:27 +08:00
static void machine__remove_thread(struct machine *machine, struct thread *th)
{
if (machine->last_match == th)
thread__zput(machine->last_match);
perf tools: Sample after exit loses thread correlation Occassionally events (e.g., context-switch, sched tracepoints) are losing the conversion of sample data associated with a thread. For example: $ perf record -e sched:sched_switch -c 1 -a -- sleep 5 $ perf script <selected events shown> ls 30482 [000] 1379727.583037: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.586339: sched:sched_switch: prev_comm=ls prev_pid=30482 ... :30482 30482 [000] 1379727.589462: sched:sched_switch: prev_comm=ls prev_pid=30482 ... The last line lost the conversion from tid to comm. If you look at the events (perf script -D) you see why - a SAMPLE event is generated after the EXIT: 0 1379727589449774 0x1540b0 [0x38]: PERF_RECORD_EXIT(30482:30482):(30482:30482) 0 1379727589462497 0x1540e8 [0x80]: PERF_RECORD_SAMPLE(IP, 1): 30482/30482: 0xffffffff816416f1 period: 1 addr: 0 ... thread: :30482:30482 When perf processes the EXIT event the thread is moved to the dead_threads list. When the SAMPLE event is processed no thread exists for the pid so a new one is created by machine__findnew_thread. This patch address the problem by delaying the move to the dead_threads list until the tid is re-used (per Adrian's suggestion). With this patch we get the previous example shows: ls 30482 [000] 1379727.583037: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.586339: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.589462: sched:sched_switch: prev_comm=ls prev_pid=30482 ... and 0 1379727589449774 0x1540b0 [0x38]: PERF_RECORD_EXIT(30482:30482):(30482:30482) 0 1379727589462497 0x1540e8 [0x80]: PERF_RECORD_SAMPLE(IP, 1): 30482/30482: 0xffffffff816416f1 period: 1 addr: 0 ... thread: ls:30482 v4: per Arnaldo's request add dead flag to thread struct and set when task exits v3: re-do from a time based check to a delayed move to dead_threads list v2: Rebased to latest perf/core branch. Changed time comparison to use a macro which explicitly shows the time basis Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1376491767-84171-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-14 22:49:27 +08:00
rb_erase(&th->rb_node, &machine->threads);
/*
* Move it first to the dead_threads list, then drop the reference,
* if this is the last reference, then the thread__delete destructor
* will be called and we will remove it from the dead_threads list.
perf tools: Sample after exit loses thread correlation Occassionally events (e.g., context-switch, sched tracepoints) are losing the conversion of sample data associated with a thread. For example: $ perf record -e sched:sched_switch -c 1 -a -- sleep 5 $ perf script <selected events shown> ls 30482 [000] 1379727.583037: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.586339: sched:sched_switch: prev_comm=ls prev_pid=30482 ... :30482 30482 [000] 1379727.589462: sched:sched_switch: prev_comm=ls prev_pid=30482 ... The last line lost the conversion from tid to comm. If you look at the events (perf script -D) you see why - a SAMPLE event is generated after the EXIT: 0 1379727589449774 0x1540b0 [0x38]: PERF_RECORD_EXIT(30482:30482):(30482:30482) 0 1379727589462497 0x1540e8 [0x80]: PERF_RECORD_SAMPLE(IP, 1): 30482/30482: 0xffffffff816416f1 period: 1 addr: 0 ... thread: :30482:30482 When perf processes the EXIT event the thread is moved to the dead_threads list. When the SAMPLE event is processed no thread exists for the pid so a new one is created by machine__findnew_thread. This patch address the problem by delaying the move to the dead_threads list until the tid is re-used (per Adrian's suggestion). With this patch we get the previous example shows: ls 30482 [000] 1379727.583037: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.586339: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.589462: sched:sched_switch: prev_comm=ls prev_pid=30482 ... and 0 1379727589449774 0x1540b0 [0x38]: PERF_RECORD_EXIT(30482:30482):(30482:30482) 0 1379727589462497 0x1540e8 [0x80]: PERF_RECORD_SAMPLE(IP, 1): 30482/30482: 0xffffffff816416f1 period: 1 addr: 0 ... thread: ls:30482 v4: per Arnaldo's request add dead flag to thread struct and set when task exits v3: re-do from a time based check to a delayed move to dead_threads list v2: Rebased to latest perf/core branch. Changed time comparison to use a macro which explicitly shows the time basis Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1376491767-84171-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-14 22:49:27 +08:00
*/
list_add_tail(&th->node, &machine->dead_threads);
thread__put(th);
perf tools: Sample after exit loses thread correlation Occassionally events (e.g., context-switch, sched tracepoints) are losing the conversion of sample data associated with a thread. For example: $ perf record -e sched:sched_switch -c 1 -a -- sleep 5 $ perf script <selected events shown> ls 30482 [000] 1379727.583037: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.586339: sched:sched_switch: prev_comm=ls prev_pid=30482 ... :30482 30482 [000] 1379727.589462: sched:sched_switch: prev_comm=ls prev_pid=30482 ... The last line lost the conversion from tid to comm. If you look at the events (perf script -D) you see why - a SAMPLE event is generated after the EXIT: 0 1379727589449774 0x1540b0 [0x38]: PERF_RECORD_EXIT(30482:30482):(30482:30482) 0 1379727589462497 0x1540e8 [0x80]: PERF_RECORD_SAMPLE(IP, 1): 30482/30482: 0xffffffff816416f1 period: 1 addr: 0 ... thread: :30482:30482 When perf processes the EXIT event the thread is moved to the dead_threads list. When the SAMPLE event is processed no thread exists for the pid so a new one is created by machine__findnew_thread. This patch address the problem by delaying the move to the dead_threads list until the tid is re-used (per Adrian's suggestion). With this patch we get the previous example shows: ls 30482 [000] 1379727.583037: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.586339: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.589462: sched:sched_switch: prev_comm=ls prev_pid=30482 ... and 0 1379727589449774 0x1540b0 [0x38]: PERF_RECORD_EXIT(30482:30482):(30482:30482) 0 1379727589462497 0x1540e8 [0x80]: PERF_RECORD_SAMPLE(IP, 1): 30482/30482: 0xffffffff816416f1 period: 1 addr: 0 ... thread: ls:30482 v4: per Arnaldo's request add dead flag to thread struct and set when task exits v3: re-do from a time based check to a delayed move to dead_threads list v2: Rebased to latest perf/core branch. Changed time comparison to use a macro which explicitly shows the time basis Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1376491767-84171-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-14 22:49:27 +08:00
}
int machine__process_fork_event(struct machine *machine, union perf_event *event,
struct perf_sample *sample)
{
struct thread *thread = machine__find_thread(machine,
event->fork.pid,
event->fork.tid);
struct thread *parent = machine__findnew_thread(machine,
event->fork.ppid,
event->fork.ptid);
perf tools: Sample after exit loses thread correlation Occassionally events (e.g., context-switch, sched tracepoints) are losing the conversion of sample data associated with a thread. For example: $ perf record -e sched:sched_switch -c 1 -a -- sleep 5 $ perf script <selected events shown> ls 30482 [000] 1379727.583037: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.586339: sched:sched_switch: prev_comm=ls prev_pid=30482 ... :30482 30482 [000] 1379727.589462: sched:sched_switch: prev_comm=ls prev_pid=30482 ... The last line lost the conversion from tid to comm. If you look at the events (perf script -D) you see why - a SAMPLE event is generated after the EXIT: 0 1379727589449774 0x1540b0 [0x38]: PERF_RECORD_EXIT(30482:30482):(30482:30482) 0 1379727589462497 0x1540e8 [0x80]: PERF_RECORD_SAMPLE(IP, 1): 30482/30482: 0xffffffff816416f1 period: 1 addr: 0 ... thread: :30482:30482 When perf processes the EXIT event the thread is moved to the dead_threads list. When the SAMPLE event is processed no thread exists for the pid so a new one is created by machine__findnew_thread. This patch address the problem by delaying the move to the dead_threads list until the tid is re-used (per Adrian's suggestion). With this patch we get the previous example shows: ls 30482 [000] 1379727.583037: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.586339: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.589462: sched:sched_switch: prev_comm=ls prev_pid=30482 ... and 0 1379727589449774 0x1540b0 [0x38]: PERF_RECORD_EXIT(30482:30482):(30482:30482) 0 1379727589462497 0x1540e8 [0x80]: PERF_RECORD_SAMPLE(IP, 1): 30482/30482: 0xffffffff816416f1 period: 1 addr: 0 ... thread: ls:30482 v4: per Arnaldo's request add dead flag to thread struct and set when task exits v3: re-do from a time based check to a delayed move to dead_threads list v2: Rebased to latest perf/core branch. Changed time comparison to use a macro which explicitly shows the time basis Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1376491767-84171-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-14 22:49:27 +08:00
/* if a thread currently exists for the thread id remove it */
if (thread != NULL)
machine__remove_thread(machine, thread);
thread = machine__findnew_thread(machine, event->fork.pid,
event->fork.tid);
if (dump_trace)
perf_event__fprintf_task(event, stdout);
if (thread == NULL || parent == NULL ||
thread__fork(thread, parent, sample->time) < 0) {
dump_printf("problem processing PERF_RECORD_FORK, skipping event.\n");
return -1;
}
return 0;
}
int machine__process_exit_event(struct machine *machine, union perf_event *event,
struct perf_sample *sample __maybe_unused)
{
struct thread *thread = machine__find_thread(machine,
event->fork.pid,
event->fork.tid);
if (dump_trace)
perf_event__fprintf_task(event, stdout);
if (thread != NULL)
perf tools: Sample after exit loses thread correlation Occassionally events (e.g., context-switch, sched tracepoints) are losing the conversion of sample data associated with a thread. For example: $ perf record -e sched:sched_switch -c 1 -a -- sleep 5 $ perf script <selected events shown> ls 30482 [000] 1379727.583037: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.586339: sched:sched_switch: prev_comm=ls prev_pid=30482 ... :30482 30482 [000] 1379727.589462: sched:sched_switch: prev_comm=ls prev_pid=30482 ... The last line lost the conversion from tid to comm. If you look at the events (perf script -D) you see why - a SAMPLE event is generated after the EXIT: 0 1379727589449774 0x1540b0 [0x38]: PERF_RECORD_EXIT(30482:30482):(30482:30482) 0 1379727589462497 0x1540e8 [0x80]: PERF_RECORD_SAMPLE(IP, 1): 30482/30482: 0xffffffff816416f1 period: 1 addr: 0 ... thread: :30482:30482 When perf processes the EXIT event the thread is moved to the dead_threads list. When the SAMPLE event is processed no thread exists for the pid so a new one is created by machine__findnew_thread. This patch address the problem by delaying the move to the dead_threads list until the tid is re-used (per Adrian's suggestion). With this patch we get the previous example shows: ls 30482 [000] 1379727.583037: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.586339: sched:sched_switch: prev_comm=ls prev_pid=30482 ... ls 30482 [000] 1379727.589462: sched:sched_switch: prev_comm=ls prev_pid=30482 ... and 0 1379727589449774 0x1540b0 [0x38]: PERF_RECORD_EXIT(30482:30482):(30482:30482) 0 1379727589462497 0x1540e8 [0x80]: PERF_RECORD_SAMPLE(IP, 1): 30482/30482: 0xffffffff816416f1 period: 1 addr: 0 ... thread: ls:30482 v4: per Arnaldo's request add dead flag to thread struct and set when task exits v3: re-do from a time based check to a delayed move to dead_threads list v2: Rebased to latest perf/core branch. Changed time comparison to use a macro which explicitly shows the time basis Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1376491767-84171-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-14 22:49:27 +08:00
thread__exited(thread);
return 0;
}
int machine__process_event(struct machine *machine, union perf_event *event,
struct perf_sample *sample)
{
int ret;
switch (event->header.type) {
case PERF_RECORD_COMM:
ret = machine__process_comm_event(machine, event, sample); break;
case PERF_RECORD_MMAP:
ret = machine__process_mmap_event(machine, event, sample); break;
case PERF_RECORD_MMAP2:
ret = machine__process_mmap2_event(machine, event, sample); break;
case PERF_RECORD_FORK:
ret = machine__process_fork_event(machine, event, sample); break;
case PERF_RECORD_EXIT:
ret = machine__process_exit_event(machine, event, sample); break;
case PERF_RECORD_LOST:
ret = machine__process_lost_event(machine, event, sample); break;
default:
ret = -1;
break;
}
return ret;
}
perf report/top: Add option to collapse undesired parts of call graph For example, in an application with an expensive function implemented with deeply nested recursive calls, the default call-graph presentation is dominated by the different callchains within that function. By ignoring these callees, we can collect the callchains leading into the function and compactly identify what to blame for expensive calls. For example, in this report the callers of garbage_collect() are scattered across the tree: $ perf report -d ruby 2>- | grep -m10 ^[^#]*[a-z] 22.03% ruby [.] gc_mark --- gc_mark |--59.40%-- mark_keyvalue | st_foreach | gc_mark_children | |--99.75%-- rb_gc_mark | | rb_vm_mark | | gc_mark_children | | gc_marks | | |--99.00%-- garbage_collect If we ignore the callees of garbage_collect(), its callers are coalesced: $ perf report --ignore-callees garbage_collect -d ruby 2>- | grep -m10 ^[^#]*[a-z] 72.92% ruby [.] garbage_collect --- garbage_collect vm_xmalloc |--47.08%-- ruby_xmalloc | st_insert2 | rb_hash_aset | |--98.45%-- features_index_add | | rb_provide_feature | | rb_require_safe | | vm_call_method Signed-off-by: Greg Price <price@mit.edu> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20130623031720.GW22203@biohazard-cafe.mit.edu Link: http://lkml.kernel.org/r/20130708115746.GO22203@biohazard-cafe.mit.edu Cc: Fengguang Wu <fengguang.wu@intel.com> [ remove spaces at beginning of line, reported by Fengguang Wu ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-12-07 13:48:05 +08:00
static bool symbol__match_regex(struct symbol *sym, regex_t *regex)
{
perf report/top: Add option to collapse undesired parts of call graph For example, in an application with an expensive function implemented with deeply nested recursive calls, the default call-graph presentation is dominated by the different callchains within that function. By ignoring these callees, we can collect the callchains leading into the function and compactly identify what to blame for expensive calls. For example, in this report the callers of garbage_collect() are scattered across the tree: $ perf report -d ruby 2>- | grep -m10 ^[^#]*[a-z] 22.03% ruby [.] gc_mark --- gc_mark |--59.40%-- mark_keyvalue | st_foreach | gc_mark_children | |--99.75%-- rb_gc_mark | | rb_vm_mark | | gc_mark_children | | gc_marks | | |--99.00%-- garbage_collect If we ignore the callees of garbage_collect(), its callers are coalesced: $ perf report --ignore-callees garbage_collect -d ruby 2>- | grep -m10 ^[^#]*[a-z] 72.92% ruby [.] garbage_collect --- garbage_collect vm_xmalloc |--47.08%-- ruby_xmalloc | st_insert2 | rb_hash_aset | |--98.45%-- features_index_add | | rb_provide_feature | | rb_require_safe | | vm_call_method Signed-off-by: Greg Price <price@mit.edu> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20130623031720.GW22203@biohazard-cafe.mit.edu Link: http://lkml.kernel.org/r/20130708115746.GO22203@biohazard-cafe.mit.edu Cc: Fengguang Wu <fengguang.wu@intel.com> [ remove spaces at beginning of line, reported by Fengguang Wu ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-12-07 13:48:05 +08:00
if (sym->name && !regexec(regex, sym->name, 0, NULL, 0))
return 1;
return 0;
}
static void ip__resolve_ams(struct thread *thread,
struct addr_map_symbol *ams,
u64 ip)
{
struct addr_location al;
memset(&al, 0, sizeof(al));
/*
* We cannot use the header.misc hint to determine whether a
* branch stack address is user, kernel, guest, hypervisor.
* Branches may straddle the kernel/user/hypervisor boundaries.
* Thus, we have to try consecutively until we find a match
* or else, the symbol is unknown
*/
thread__find_cpumode_addr_location(thread, MAP__FUNCTION, ip, &al);
ams->addr = ip;
ams->al_addr = al.addr;
ams->sym = al.sym;
ams->map = al.map;
}
static void ip__resolve_data(struct thread *thread,
u8 m, struct addr_map_symbol *ams, u64 addr)
{
struct addr_location al;
memset(&al, 0, sizeof(al));
thread__find_addr_location(thread, m, MAP__VARIABLE, addr, &al);
if (al.map == NULL) {
/*
* some shared data regions have execute bit set which puts
* their mapping in the MAP__FUNCTION type array.
* Check there as a fallback option before dropping the sample.
*/
thread__find_addr_location(thread, m, MAP__FUNCTION, addr, &al);
}
ams->addr = addr;
ams->al_addr = al.addr;
ams->sym = al.sym;
ams->map = al.map;
}
struct mem_info *sample__resolve_mem(struct perf_sample *sample,
struct addr_location *al)
{
struct mem_info *mi = zalloc(sizeof(*mi));
if (!mi)
return NULL;
ip__resolve_ams(al->thread, &mi->iaddr, sample->ip);
ip__resolve_data(al->thread, al->cpumode, &mi->daddr, sample->addr);
mi->data_src.val = sample->data_src;
return mi;
}
static int add_callchain_ip(struct thread *thread,
struct symbol **parent,
struct addr_location *root_al,
bool branch_history,
u64 ip)
{
struct addr_location al;
al.filtered = 0;
al.sym = NULL;
if (branch_history)
perf callchain: Support handling complete branch stacks as histograms Currently branch stacks can be only shown as edge histograms for individual branches. I never found this display particularly useful. This implements an alternative mode that creates histograms over complete branch traces, instead of individual branches, similar to how normal callgraphs are handled. This is done by putting it in front of the normal callgraph and then using the normal callgraph histogram infrastructure to unify them. This way in complex functions we can understand the control flow that lead to a particular sample, and may even see some control flow in the caller for short functions. Example (simplified, of course for such simple code this is usually not needed), please run this after the whole patchkit is in, as at this point in the patch order there is no --branch-history, that will be added in a patch after this one: tcall.c: volatile a = 10000, b = 100000, c; __attribute__((noinline)) f2() { c = a / b; } __attribute__((noinline)) f1() { f2(); f2(); } main() { int i; for (i = 0; i < 1000000; i++) f1(); } % perf record -b -g ./tsrc/tcall [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.044 MB perf.data (~1923 samples) ] % perf report --no-children --branch-history ... 54.91% tcall.c:6 [.] f2 tcall | |--65.53%-- f2 tcall.c:5 | | | |--70.83%-- f1 tcall.c:11 | | f1 tcall.c:10 | | main tcall.c:18 | | main tcall.c:18 | | main tcall.c:17 | | main tcall.c:17 | | f1 tcall.c:13 | | f1 tcall.c:13 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:12 | | f1 tcall.c:12 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:11 | | | --29.17%-- f1 tcall.c:12 | f1 tcall.c:12 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:11 | f1 tcall.c:10 | main tcall.c:18 | main tcall.c:18 | main tcall.c:17 | main tcall.c:17 | f1 tcall.c:13 | f1 tcall.c:13 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:12 The default output is unchanged. This is only implemented in perf report, no change to record or anywhere else. This adds the basic code to report: - add a new "branch" option to the -g option parser to enable this mode - when the flag is set include the LBR into the callstack in machine.c. The rest of the history code is unchanged and doesn't know the difference between LBR entry and normal call entry. - detect overlaps with the callchain - remove small loop duplicates in the LBR Current limitations: - The LBR flags (mispredict etc.) are not shown in the history and LBR entries have no special marker. - It would be nice if annotate marked the LBR entries somehow (e.g. with arrows) v2: Various fixes. v3: Merge further patches into this one. Fix white space. v4: Improve manpage. Address review feedback. v5: Rename functions. Better error message without -g. Fix crash without -b. v6: Rebase v7: Rebase. Use NO_ENTRY in memset. v8: Port to latest tip. Move add_callchain_ip to separate patch. Skip initial entries in callchain. Minor cleanups. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-3-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-13 10:05:20 +08:00
thread__find_cpumode_addr_location(thread, MAP__FUNCTION,
ip, &al);
else {
u8 cpumode = PERF_RECORD_MISC_USER;
if (ip >= PERF_CONTEXT_MAX) {
switch (ip) {
case PERF_CONTEXT_HV:
cpumode = PERF_RECORD_MISC_HYPERVISOR;
break;
case PERF_CONTEXT_KERNEL:
cpumode = PERF_RECORD_MISC_KERNEL;
break;
case PERF_CONTEXT_USER:
cpumode = PERF_RECORD_MISC_USER;
break;
default:
pr_debug("invalid callchain context: "
"%"PRId64"\n", (s64) ip);
/*
* It seems the callchain is corrupted.
* Discard all.
*/
callchain_cursor_reset(&callchain_cursor);
return 1;
}
return 0;
}
perf callchain: Support handling complete branch stacks as histograms Currently branch stacks can be only shown as edge histograms for individual branches. I never found this display particularly useful. This implements an alternative mode that creates histograms over complete branch traces, instead of individual branches, similar to how normal callgraphs are handled. This is done by putting it in front of the normal callgraph and then using the normal callgraph histogram infrastructure to unify them. This way in complex functions we can understand the control flow that lead to a particular sample, and may even see some control flow in the caller for short functions. Example (simplified, of course for such simple code this is usually not needed), please run this after the whole patchkit is in, as at this point in the patch order there is no --branch-history, that will be added in a patch after this one: tcall.c: volatile a = 10000, b = 100000, c; __attribute__((noinline)) f2() { c = a / b; } __attribute__((noinline)) f1() { f2(); f2(); } main() { int i; for (i = 0; i < 1000000; i++) f1(); } % perf record -b -g ./tsrc/tcall [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.044 MB perf.data (~1923 samples) ] % perf report --no-children --branch-history ... 54.91% tcall.c:6 [.] f2 tcall | |--65.53%-- f2 tcall.c:5 | | | |--70.83%-- f1 tcall.c:11 | | f1 tcall.c:10 | | main tcall.c:18 | | main tcall.c:18 | | main tcall.c:17 | | main tcall.c:17 | | f1 tcall.c:13 | | f1 tcall.c:13 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:12 | | f1 tcall.c:12 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:11 | | | --29.17%-- f1 tcall.c:12 | f1 tcall.c:12 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:11 | f1 tcall.c:10 | main tcall.c:18 | main tcall.c:18 | main tcall.c:17 | main tcall.c:17 | f1 tcall.c:13 | f1 tcall.c:13 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:12 The default output is unchanged. This is only implemented in perf report, no change to record or anywhere else. This adds the basic code to report: - add a new "branch" option to the -g option parser to enable this mode - when the flag is set include the LBR into the callstack in machine.c. The rest of the history code is unchanged and doesn't know the difference between LBR entry and normal call entry. - detect overlaps with the callchain - remove small loop duplicates in the LBR Current limitations: - The LBR flags (mispredict etc.) are not shown in the history and LBR entries have no special marker. - It would be nice if annotate marked the LBR entries somehow (e.g. with arrows) v2: Various fixes. v3: Merge further patches into this one. Fix white space. v4: Improve manpage. Address review feedback. v5: Rename functions. Better error message without -g. Fix crash without -b. v6: Rebase v7: Rebase. Use NO_ENTRY in memset. v8: Port to latest tip. Move add_callchain_ip to separate patch. Skip initial entries in callchain. Minor cleanups. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-3-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-13 10:05:20 +08:00
thread__find_addr_location(thread, cpumode, MAP__FUNCTION,
ip, &al);
}
if (al.sym != NULL) {
if (sort__has_parent && !*parent &&
symbol__match_regex(al.sym, &parent_regex))
*parent = al.sym;
else if (have_ignore_callees && root_al &&
symbol__match_regex(al.sym, &ignore_callees_regex)) {
/* Treat this symbol as the root,
forgetting its callees. */
*root_al = al;
callchain_cursor_reset(&callchain_cursor);
}
}
return callchain_cursor_append(&callchain_cursor, al.addr, al.map, al.sym);
}
struct branch_info *sample__resolve_bstack(struct perf_sample *sample,
struct addr_location *al)
{
unsigned int i;
const struct branch_stack *bs = sample->branch_stack;
struct branch_info *bi = calloc(bs->nr, sizeof(struct branch_info));
if (!bi)
return NULL;
for (i = 0; i < bs->nr; i++) {
ip__resolve_ams(al->thread, &bi[i].to, bs->entries[i].to);
ip__resolve_ams(al->thread, &bi[i].from, bs->entries[i].from);
bi[i].flags = bs->entries[i].flags;
}
return bi;
}
perf callchain: Support handling complete branch stacks as histograms Currently branch stacks can be only shown as edge histograms for individual branches. I never found this display particularly useful. This implements an alternative mode that creates histograms over complete branch traces, instead of individual branches, similar to how normal callgraphs are handled. This is done by putting it in front of the normal callgraph and then using the normal callgraph histogram infrastructure to unify them. This way in complex functions we can understand the control flow that lead to a particular sample, and may even see some control flow in the caller for short functions. Example (simplified, of course for such simple code this is usually not needed), please run this after the whole patchkit is in, as at this point in the patch order there is no --branch-history, that will be added in a patch after this one: tcall.c: volatile a = 10000, b = 100000, c; __attribute__((noinline)) f2() { c = a / b; } __attribute__((noinline)) f1() { f2(); f2(); } main() { int i; for (i = 0; i < 1000000; i++) f1(); } % perf record -b -g ./tsrc/tcall [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.044 MB perf.data (~1923 samples) ] % perf report --no-children --branch-history ... 54.91% tcall.c:6 [.] f2 tcall | |--65.53%-- f2 tcall.c:5 | | | |--70.83%-- f1 tcall.c:11 | | f1 tcall.c:10 | | main tcall.c:18 | | main tcall.c:18 | | main tcall.c:17 | | main tcall.c:17 | | f1 tcall.c:13 | | f1 tcall.c:13 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:12 | | f1 tcall.c:12 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:11 | | | --29.17%-- f1 tcall.c:12 | f1 tcall.c:12 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:11 | f1 tcall.c:10 | main tcall.c:18 | main tcall.c:18 | main tcall.c:17 | main tcall.c:17 | f1 tcall.c:13 | f1 tcall.c:13 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:12 The default output is unchanged. This is only implemented in perf report, no change to record or anywhere else. This adds the basic code to report: - add a new "branch" option to the -g option parser to enable this mode - when the flag is set include the LBR into the callstack in machine.c. The rest of the history code is unchanged and doesn't know the difference between LBR entry and normal call entry. - detect overlaps with the callchain - remove small loop duplicates in the LBR Current limitations: - The LBR flags (mispredict etc.) are not shown in the history and LBR entries have no special marker. - It would be nice if annotate marked the LBR entries somehow (e.g. with arrows) v2: Various fixes. v3: Merge further patches into this one. Fix white space. v4: Improve manpage. Address review feedback. v5: Rename functions. Better error message without -g. Fix crash without -b. v6: Rebase v7: Rebase. Use NO_ENTRY in memset. v8: Port to latest tip. Move add_callchain_ip to separate patch. Skip initial entries in callchain. Minor cleanups. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-3-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-13 10:05:20 +08:00
#define CHASHSZ 127
#define CHASHBITS 7
#define NO_ENTRY 0xff
#define PERF_MAX_BRANCH_DEPTH 127
/* Remove loops. */
static int remove_loops(struct branch_entry *l, int nr)
{
int i, j, off;
unsigned char chash[CHASHSZ];
memset(chash, NO_ENTRY, sizeof(chash));
BUG_ON(PERF_MAX_BRANCH_DEPTH > 255);
for (i = 0; i < nr; i++) {
int h = hash_64(l[i].from, CHASHBITS) % CHASHSZ;
/* no collision handling for now */
if (chash[h] == NO_ENTRY) {
chash[h] = i;
} else if (l[chash[h]].from == l[i].from) {
bool is_loop = true;
/* check if it is a real loop */
off = 0;
for (j = chash[h]; j < i && i + off < nr; j++, off++)
if (l[j].from != l[i + off].from) {
is_loop = false;
break;
}
if (is_loop) {
memmove(l + i, l + i + off,
(nr - (i + off)) * sizeof(*l));
nr -= off;
}
}
}
return nr;
}
perf tools: Construct LBR call chain LBR call stack only has user-space callchains. It is output in the PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's still in the form of PERF_SAMPLE_CALLCHAIN. The perf tool has to handle both data sources to construct a complete callstack. For the "perf report -D" option, both lbr and fp information will be displayed. A new call chain recording option "lbr" is introduced into the perf tool for LBR call stack. The user can use --call-graph lbr to get the call stack information from hardware. Here are some examples. When profiling bc(1) on Fedora 19: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd If enabling LBR, perf report output looks like: 50.36% bc bc [.] bc_divide | --- bc_divide execute run_code yyparse main __libc_start_main _start 33.66% bc bc [.] _one_mult | --- _one_mult bc_divide execute run_code yyparse main __libc_start_main _start 7.62% bc bc [.] _bc_do_add | --- _bc_do_add | |--99.89%-- 0x2000186a8 --0.11%-- [...] 6.83% bc bc [.] _bc_do_sub | --- _bc_do_sub | |--99.94%-- bc_add | execute | run_code | yyparse | main | __libc_start_main | _start --0.06%-- [...] 0.46% bc libc-2.17.so [.] __memset_sse2 | --- __memset_sse2 | |--54.13%-- bc_new_num | | | |--51.00%-- bc_divide | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | |--30.46%-- _bc_do_sub | | bc_add | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | --18.55%-- _bc_do_add | bc_add | execute | run_code | yyparse | main | __libc_start_main | _start | --45.87%-- bc_divide execute run_code yyparse main __libc_start_main _start If using FP, perf report output looks like: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd 50.49% bc bc [.] bc_divide | --- bc_divide 33.57% bc bc [.] _one_mult | --- _one_mult 7.61% bc bc [.] _bc_do_add | --- _bc_do_add 0x2000186a8 6.88% bc bc [.] _bc_do_sub | --- _bc_do_sub 0.42% bc libc-2.17.so [.] __memcpy_ssse3_back | --- __memcpy_ssse3_back If using LBR, perf report -D output looks like: 3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0 ... LBR call chain: nr:8 ..... 0: fffffffffffffe00 ..... 1: 0000000000408e50 ..... 2: 000000000040a458 ..... 3: 000000000040562e ..... 4: 0000000000408590 ..... 5: 00000000004022c0 ..... 6: 00000000004015dd ..... 7: 0000003d1cc21b43 ... FP chain: nr:2 ..... 0: fffffffffffffe00 ..... 1: 0000000000408ea8 ... thread: bc:9748 ...... dso: /usr/bin/bc The LBR call stack has the following known limitations: - Zero length calls are not filtered out by the hardware - Exception handing such as setjmp/longjmp will have calls/returns not match - Pushing different return address onto the stack will have calls/returns not match - If callstack is deeper than the LBR, only the last entries are captured Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-06 02:23:05 +08:00
/*
* Recolve LBR callstack chain sample
* Return:
* 1 on success get LBR callchain information
* 0 no available LBR callchain information, should try fp
* negative error code on other errors.
*/
static int resolve_lbr_callchain_sample(struct thread *thread,
struct perf_sample *sample,
struct symbol **parent,
struct addr_location *root_al,
int max_stack)
{
perf tools: Construct LBR call chain LBR call stack only has user-space callchains. It is output in the PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's still in the form of PERF_SAMPLE_CALLCHAIN. The perf tool has to handle both data sources to construct a complete callstack. For the "perf report -D" option, both lbr and fp information will be displayed. A new call chain recording option "lbr" is introduced into the perf tool for LBR call stack. The user can use --call-graph lbr to get the call stack information from hardware. Here are some examples. When profiling bc(1) on Fedora 19: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd If enabling LBR, perf report output looks like: 50.36% bc bc [.] bc_divide | --- bc_divide execute run_code yyparse main __libc_start_main _start 33.66% bc bc [.] _one_mult | --- _one_mult bc_divide execute run_code yyparse main __libc_start_main _start 7.62% bc bc [.] _bc_do_add | --- _bc_do_add | |--99.89%-- 0x2000186a8 --0.11%-- [...] 6.83% bc bc [.] _bc_do_sub | --- _bc_do_sub | |--99.94%-- bc_add | execute | run_code | yyparse | main | __libc_start_main | _start --0.06%-- [...] 0.46% bc libc-2.17.so [.] __memset_sse2 | --- __memset_sse2 | |--54.13%-- bc_new_num | | | |--51.00%-- bc_divide | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | |--30.46%-- _bc_do_sub | | bc_add | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | --18.55%-- _bc_do_add | bc_add | execute | run_code | yyparse | main | __libc_start_main | _start | --45.87%-- bc_divide execute run_code yyparse main __libc_start_main _start If using FP, perf report output looks like: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd 50.49% bc bc [.] bc_divide | --- bc_divide 33.57% bc bc [.] _one_mult | --- _one_mult 7.61% bc bc [.] _bc_do_add | --- _bc_do_add 0x2000186a8 6.88% bc bc [.] _bc_do_sub | --- _bc_do_sub 0.42% bc libc-2.17.so [.] __memcpy_ssse3_back | --- __memcpy_ssse3_back If using LBR, perf report -D output looks like: 3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0 ... LBR call chain: nr:8 ..... 0: fffffffffffffe00 ..... 1: 0000000000408e50 ..... 2: 000000000040a458 ..... 3: 000000000040562e ..... 4: 0000000000408590 ..... 5: 00000000004022c0 ..... 6: 00000000004015dd ..... 7: 0000003d1cc21b43 ... FP chain: nr:2 ..... 0: fffffffffffffe00 ..... 1: 0000000000408ea8 ... thread: bc:9748 ...... dso: /usr/bin/bc The LBR call stack has the following known limitations: - Zero length calls are not filtered out by the hardware - Exception handing such as setjmp/longjmp will have calls/returns not match - Pushing different return address onto the stack will have calls/returns not match - If callstack is deeper than the LBR, only the last entries are captured Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-06 02:23:05 +08:00
struct ip_callchain *chain = sample->callchain;
int chain_nr = min(max_stack, (int)chain->nr);
int i, j, err;
u64 ip;
for (i = 0; i < chain_nr; i++) {
if (chain->ips[i] == PERF_CONTEXT_USER)
break;
}
/* LBR only affects the user callchain */
if (i != chain_nr) {
struct branch_stack *lbr_stack = sample->branch_stack;
int lbr_nr = lbr_stack->nr;
/*
* LBR callstack can only get user call chain.
* The mix_chain_nr is kernel call chain
* number plus LBR user call chain number.
* i is kernel call chain number,
* 1 is PERF_CONTEXT_USER,
* lbr_nr + 1 is the user call chain number.
* For details, please refer to the comments
* in callchain__printf
*/
int mix_chain_nr = i + 1 + lbr_nr + 1;
if (mix_chain_nr > PERF_MAX_STACK_DEPTH + PERF_MAX_BRANCH_DEPTH) {
pr_warning("corrupted callchain. skipping...\n");
return 0;
}
for (j = 0; j < mix_chain_nr; j++) {
if (callchain_param.order == ORDER_CALLEE) {
if (j < i + 1)
ip = chain->ips[j];
else if (j > i + 1)
ip = lbr_stack->entries[j - i - 2].from;
else
ip = lbr_stack->entries[0].to;
} else {
if (j < lbr_nr)
ip = lbr_stack->entries[lbr_nr - j - 1].from;
else if (j > lbr_nr)
ip = chain->ips[i + 1 - (j - lbr_nr)];
else
ip = lbr_stack->entries[0].to;
}
err = add_callchain_ip(thread, parent, root_al, false, ip);
if (err)
return (err < 0) ? err : 0;
}
return 1;
}
return 0;
}
static int thread__resolve_callchain_sample(struct thread *thread,
struct perf_evsel *evsel,
struct perf_sample *sample,
struct symbol **parent,
struct addr_location *root_al,
int max_stack)
{
struct branch_stack *branch = sample->branch_stack;
struct ip_callchain *chain = sample->callchain;
perf report: Add --max-stack option to limit callchain stack scan When callgraph data was included in the perf data file, it may take a long time to scan all those data and merge them together especially if the stored callchains are long and the perf data file itself is large, like a Gbyte or so. The callchain stack is currently limited to PERF_MAX_STACK_DEPTH (127). This is a large value. Usually the callgraph data that developers are most interested in are the first few levels, the rests are usually not looked at. This patch adds a new --max-stack option to perf-report to limit the depth of callchain stack data to look at to reduce the time it takes for perf-report to finish its processing. It trades the presence of trailing stack information with faster speed. The following table shows the elapsed time of doing perf-report on a perf.data file of size 985,531,828 bytes. --max_stack Elapsed Time Output data size ----------- ------------ ---------------- not set 88.0s 124,422,651 64 87.5s 116,303,213 32 87.2s 112,023,804 16 86.6s 94,326,380 8 59.9s 33,697,248 4 40.7s 10,116,637 -g none 27.1s 2,555,810 Signed-off-by: Waiman Long <Waiman.Long@hp.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Aswin Chandramouleeswaran <aswin@hp.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Scott J Norton <scott.norton@hp.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1382107129-2010-4-git-send-email-Waiman.Long@hp.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-18 22:38:48 +08:00
int chain_nr = min(max_stack, (int)chain->nr);
int i, j, err;
perf callchain: Support handling complete branch stacks as histograms Currently branch stacks can be only shown as edge histograms for individual branches. I never found this display particularly useful. This implements an alternative mode that creates histograms over complete branch traces, instead of individual branches, similar to how normal callgraphs are handled. This is done by putting it in front of the normal callgraph and then using the normal callgraph histogram infrastructure to unify them. This way in complex functions we can understand the control flow that lead to a particular sample, and may even see some control flow in the caller for short functions. Example (simplified, of course for such simple code this is usually not needed), please run this after the whole patchkit is in, as at this point in the patch order there is no --branch-history, that will be added in a patch after this one: tcall.c: volatile a = 10000, b = 100000, c; __attribute__((noinline)) f2() { c = a / b; } __attribute__((noinline)) f1() { f2(); f2(); } main() { int i; for (i = 0; i < 1000000; i++) f1(); } % perf record -b -g ./tsrc/tcall [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.044 MB perf.data (~1923 samples) ] % perf report --no-children --branch-history ... 54.91% tcall.c:6 [.] f2 tcall | |--65.53%-- f2 tcall.c:5 | | | |--70.83%-- f1 tcall.c:11 | | f1 tcall.c:10 | | main tcall.c:18 | | main tcall.c:18 | | main tcall.c:17 | | main tcall.c:17 | | f1 tcall.c:13 | | f1 tcall.c:13 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:12 | | f1 tcall.c:12 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:11 | | | --29.17%-- f1 tcall.c:12 | f1 tcall.c:12 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:11 | f1 tcall.c:10 | main tcall.c:18 | main tcall.c:18 | main tcall.c:17 | main tcall.c:17 | f1 tcall.c:13 | f1 tcall.c:13 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:12 The default output is unchanged. This is only implemented in perf report, no change to record or anywhere else. This adds the basic code to report: - add a new "branch" option to the -g option parser to enable this mode - when the flag is set include the LBR into the callstack in machine.c. The rest of the history code is unchanged and doesn't know the difference between LBR entry and normal call entry. - detect overlaps with the callchain - remove small loop duplicates in the LBR Current limitations: - The LBR flags (mispredict etc.) are not shown in the history and LBR entries have no special marker. - It would be nice if annotate marked the LBR entries somehow (e.g. with arrows) v2: Various fixes. v3: Merge further patches into this one. Fix white space. v4: Improve manpage. Address review feedback. v5: Rename functions. Better error message without -g. Fix crash without -b. v6: Rebase v7: Rebase. Use NO_ENTRY in memset. v8: Port to latest tip. Move add_callchain_ip to separate patch. Skip initial entries in callchain. Minor cleanups. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-3-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-13 10:05:20 +08:00
int skip_idx = -1;
int first_call = 0;
perf tools: Construct LBR call chain LBR call stack only has user-space callchains. It is output in the PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's still in the form of PERF_SAMPLE_CALLCHAIN. The perf tool has to handle both data sources to construct a complete callstack. For the "perf report -D" option, both lbr and fp information will be displayed. A new call chain recording option "lbr" is introduced into the perf tool for LBR call stack. The user can use --call-graph lbr to get the call stack information from hardware. Here are some examples. When profiling bc(1) on Fedora 19: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd If enabling LBR, perf report output looks like: 50.36% bc bc [.] bc_divide | --- bc_divide execute run_code yyparse main __libc_start_main _start 33.66% bc bc [.] _one_mult | --- _one_mult bc_divide execute run_code yyparse main __libc_start_main _start 7.62% bc bc [.] _bc_do_add | --- _bc_do_add | |--99.89%-- 0x2000186a8 --0.11%-- [...] 6.83% bc bc [.] _bc_do_sub | --- _bc_do_sub | |--99.94%-- bc_add | execute | run_code | yyparse | main | __libc_start_main | _start --0.06%-- [...] 0.46% bc libc-2.17.so [.] __memset_sse2 | --- __memset_sse2 | |--54.13%-- bc_new_num | | | |--51.00%-- bc_divide | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | |--30.46%-- _bc_do_sub | | bc_add | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | --18.55%-- _bc_do_add | bc_add | execute | run_code | yyparse | main | __libc_start_main | _start | --45.87%-- bc_divide execute run_code yyparse main __libc_start_main _start If using FP, perf report output looks like: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd 50.49% bc bc [.] bc_divide | --- bc_divide 33.57% bc bc [.] _one_mult | --- _one_mult 7.61% bc bc [.] _bc_do_add | --- _bc_do_add 0x2000186a8 6.88% bc bc [.] _bc_do_sub | --- _bc_do_sub 0.42% bc libc-2.17.so [.] __memcpy_ssse3_back | --- __memcpy_ssse3_back If using LBR, perf report -D output looks like: 3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0 ... LBR call chain: nr:8 ..... 0: fffffffffffffe00 ..... 1: 0000000000408e50 ..... 2: 000000000040a458 ..... 3: 000000000040562e ..... 4: 0000000000408590 ..... 5: 00000000004022c0 ..... 6: 00000000004015dd ..... 7: 0000003d1cc21b43 ... FP chain: nr:2 ..... 0: fffffffffffffe00 ..... 1: 0000000000408ea8 ... thread: bc:9748 ...... dso: /usr/bin/bc The LBR call stack has the following known limitations: - Zero length calls are not filtered out by the hardware - Exception handing such as setjmp/longjmp will have calls/returns not match - Pushing different return address onto the stack will have calls/returns not match - If callstack is deeper than the LBR, only the last entries are captured Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-06 02:23:05 +08:00
callchain_cursor_reset(&callchain_cursor);
if (has_branch_callstack(evsel)) {
err = resolve_lbr_callchain_sample(thread, sample, parent,
root_al, max_stack);
if (err)
return (err < 0) ? err : 0;
}
perf callchain: Support handling complete branch stacks as histograms Currently branch stacks can be only shown as edge histograms for individual branches. I never found this display particularly useful. This implements an alternative mode that creates histograms over complete branch traces, instead of individual branches, similar to how normal callgraphs are handled. This is done by putting it in front of the normal callgraph and then using the normal callgraph histogram infrastructure to unify them. This way in complex functions we can understand the control flow that lead to a particular sample, and may even see some control flow in the caller for short functions. Example (simplified, of course for such simple code this is usually not needed), please run this after the whole patchkit is in, as at this point in the patch order there is no --branch-history, that will be added in a patch after this one: tcall.c: volatile a = 10000, b = 100000, c; __attribute__((noinline)) f2() { c = a / b; } __attribute__((noinline)) f1() { f2(); f2(); } main() { int i; for (i = 0; i < 1000000; i++) f1(); } % perf record -b -g ./tsrc/tcall [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.044 MB perf.data (~1923 samples) ] % perf report --no-children --branch-history ... 54.91% tcall.c:6 [.] f2 tcall | |--65.53%-- f2 tcall.c:5 | | | |--70.83%-- f1 tcall.c:11 | | f1 tcall.c:10 | | main tcall.c:18 | | main tcall.c:18 | | main tcall.c:17 | | main tcall.c:17 | | f1 tcall.c:13 | | f1 tcall.c:13 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:12 | | f1 tcall.c:12 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:11 | | | --29.17%-- f1 tcall.c:12 | f1 tcall.c:12 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:11 | f1 tcall.c:10 | main tcall.c:18 | main tcall.c:18 | main tcall.c:17 | main tcall.c:17 | f1 tcall.c:13 | f1 tcall.c:13 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:12 The default output is unchanged. This is only implemented in perf report, no change to record or anywhere else. This adds the basic code to report: - add a new "branch" option to the -g option parser to enable this mode - when the flag is set include the LBR into the callstack in machine.c. The rest of the history code is unchanged and doesn't know the difference between LBR entry and normal call entry. - detect overlaps with the callchain - remove small loop duplicates in the LBR Current limitations: - The LBR flags (mispredict etc.) are not shown in the history and LBR entries have no special marker. - It would be nice if annotate marked the LBR entries somehow (e.g. with arrows) v2: Various fixes. v3: Merge further patches into this one. Fix white space. v4: Improve manpage. Address review feedback. v5: Rename functions. Better error message without -g. Fix crash without -b. v6: Rebase v7: Rebase. Use NO_ENTRY in memset. v8: Port to latest tip. Move add_callchain_ip to separate patch. Skip initial entries in callchain. Minor cleanups. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-3-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-13 10:05:20 +08:00
/*
* Based on DWARF debug information, some architectures skip
* a callchain entry saved by the kernel.
*/
if (chain->nr < PERF_MAX_STACK_DEPTH)
skip_idx = arch_skip_callchain_idx(thread, chain);
perf callchain: Support handling complete branch stacks as histograms Currently branch stacks can be only shown as edge histograms for individual branches. I never found this display particularly useful. This implements an alternative mode that creates histograms over complete branch traces, instead of individual branches, similar to how normal callgraphs are handled. This is done by putting it in front of the normal callgraph and then using the normal callgraph histogram infrastructure to unify them. This way in complex functions we can understand the control flow that lead to a particular sample, and may even see some control flow in the caller for short functions. Example (simplified, of course for such simple code this is usually not needed), please run this after the whole patchkit is in, as at this point in the patch order there is no --branch-history, that will be added in a patch after this one: tcall.c: volatile a = 10000, b = 100000, c; __attribute__((noinline)) f2() { c = a / b; } __attribute__((noinline)) f1() { f2(); f2(); } main() { int i; for (i = 0; i < 1000000; i++) f1(); } % perf record -b -g ./tsrc/tcall [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.044 MB perf.data (~1923 samples) ] % perf report --no-children --branch-history ... 54.91% tcall.c:6 [.] f2 tcall | |--65.53%-- f2 tcall.c:5 | | | |--70.83%-- f1 tcall.c:11 | | f1 tcall.c:10 | | main tcall.c:18 | | main tcall.c:18 | | main tcall.c:17 | | main tcall.c:17 | | f1 tcall.c:13 | | f1 tcall.c:13 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:12 | | f1 tcall.c:12 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:11 | | | --29.17%-- f1 tcall.c:12 | f1 tcall.c:12 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:11 | f1 tcall.c:10 | main tcall.c:18 | main tcall.c:18 | main tcall.c:17 | main tcall.c:17 | f1 tcall.c:13 | f1 tcall.c:13 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:12 The default output is unchanged. This is only implemented in perf report, no change to record or anywhere else. This adds the basic code to report: - add a new "branch" option to the -g option parser to enable this mode - when the flag is set include the LBR into the callstack in machine.c. The rest of the history code is unchanged and doesn't know the difference between LBR entry and normal call entry. - detect overlaps with the callchain - remove small loop duplicates in the LBR Current limitations: - The LBR flags (mispredict etc.) are not shown in the history and LBR entries have no special marker. - It would be nice if annotate marked the LBR entries somehow (e.g. with arrows) v2: Various fixes. v3: Merge further patches into this one. Fix white space. v4: Improve manpage. Address review feedback. v5: Rename functions. Better error message without -g. Fix crash without -b. v6: Rebase v7: Rebase. Use NO_ENTRY in memset. v8: Port to latest tip. Move add_callchain_ip to separate patch. Skip initial entries in callchain. Minor cleanups. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-3-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-13 10:05:20 +08:00
/*
* Add branches to call stack for easier browsing. This gives
* more context for a sample than just the callers.
*
* This uses individual histograms of paths compared to the
* aggregated histograms the normal LBR mode uses.
*
* Limitations for now:
* - No extra filters
* - No annotations (should annotate somehow)
*/
if (branch && callchain_param.branch_callstack) {
int nr = min(max_stack, (int)branch->nr);
struct branch_entry be[nr];
if (branch->nr > PERF_MAX_BRANCH_DEPTH) {
pr_warning("corrupted branch chain. skipping...\n");
goto check_calls;
}
for (i = 0; i < nr; i++) {
if (callchain_param.order == ORDER_CALLEE) {
be[i] = branch->entries[i];
/*
* Check for overlap into the callchain.
* The return address is one off compared to
* the branch entry. To adjust for this
* assume the calling instruction is not longer
* than 8 bytes.
*/
if (i == skip_idx ||
chain->ips[first_call] >= PERF_CONTEXT_MAX)
first_call++;
else if (be[i].from < chain->ips[first_call] &&
be[i].from >= chain->ips[first_call] - 8)
first_call++;
} else
be[i] = branch->entries[branch->nr - i - 1];
}
nr = remove_loops(be, nr);
for (i = 0; i < nr; i++) {
err = add_callchain_ip(thread, parent, root_al,
true, be[i].to);
perf callchain: Support handling complete branch stacks as histograms Currently branch stacks can be only shown as edge histograms for individual branches. I never found this display particularly useful. This implements an alternative mode that creates histograms over complete branch traces, instead of individual branches, similar to how normal callgraphs are handled. This is done by putting it in front of the normal callgraph and then using the normal callgraph histogram infrastructure to unify them. This way in complex functions we can understand the control flow that lead to a particular sample, and may even see some control flow in the caller for short functions. Example (simplified, of course for such simple code this is usually not needed), please run this after the whole patchkit is in, as at this point in the patch order there is no --branch-history, that will be added in a patch after this one: tcall.c: volatile a = 10000, b = 100000, c; __attribute__((noinline)) f2() { c = a / b; } __attribute__((noinline)) f1() { f2(); f2(); } main() { int i; for (i = 0; i < 1000000; i++) f1(); } % perf record -b -g ./tsrc/tcall [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.044 MB perf.data (~1923 samples) ] % perf report --no-children --branch-history ... 54.91% tcall.c:6 [.] f2 tcall | |--65.53%-- f2 tcall.c:5 | | | |--70.83%-- f1 tcall.c:11 | | f1 tcall.c:10 | | main tcall.c:18 | | main tcall.c:18 | | main tcall.c:17 | | main tcall.c:17 | | f1 tcall.c:13 | | f1 tcall.c:13 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:12 | | f1 tcall.c:12 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:11 | | | --29.17%-- f1 tcall.c:12 | f1 tcall.c:12 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:11 | f1 tcall.c:10 | main tcall.c:18 | main tcall.c:18 | main tcall.c:17 | main tcall.c:17 | f1 tcall.c:13 | f1 tcall.c:13 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:12 The default output is unchanged. This is only implemented in perf report, no change to record or anywhere else. This adds the basic code to report: - add a new "branch" option to the -g option parser to enable this mode - when the flag is set include the LBR into the callstack in machine.c. The rest of the history code is unchanged and doesn't know the difference between LBR entry and normal call entry. - detect overlaps with the callchain - remove small loop duplicates in the LBR Current limitations: - The LBR flags (mispredict etc.) are not shown in the history and LBR entries have no special marker. - It would be nice if annotate marked the LBR entries somehow (e.g. with arrows) v2: Various fixes. v3: Merge further patches into this one. Fix white space. v4: Improve manpage. Address review feedback. v5: Rename functions. Better error message without -g. Fix crash without -b. v6: Rebase v7: Rebase. Use NO_ENTRY in memset. v8: Port to latest tip. Move add_callchain_ip to separate patch. Skip initial entries in callchain. Minor cleanups. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-3-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-13 10:05:20 +08:00
if (!err)
err = add_callchain_ip(thread, parent, root_al,
true, be[i].from);
perf callchain: Support handling complete branch stacks as histograms Currently branch stacks can be only shown as edge histograms for individual branches. I never found this display particularly useful. This implements an alternative mode that creates histograms over complete branch traces, instead of individual branches, similar to how normal callgraphs are handled. This is done by putting it in front of the normal callgraph and then using the normal callgraph histogram infrastructure to unify them. This way in complex functions we can understand the control flow that lead to a particular sample, and may even see some control flow in the caller for short functions. Example (simplified, of course for such simple code this is usually not needed), please run this after the whole patchkit is in, as at this point in the patch order there is no --branch-history, that will be added in a patch after this one: tcall.c: volatile a = 10000, b = 100000, c; __attribute__((noinline)) f2() { c = a / b; } __attribute__((noinline)) f1() { f2(); f2(); } main() { int i; for (i = 0; i < 1000000; i++) f1(); } % perf record -b -g ./tsrc/tcall [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.044 MB perf.data (~1923 samples) ] % perf report --no-children --branch-history ... 54.91% tcall.c:6 [.] f2 tcall | |--65.53%-- f2 tcall.c:5 | | | |--70.83%-- f1 tcall.c:11 | | f1 tcall.c:10 | | main tcall.c:18 | | main tcall.c:18 | | main tcall.c:17 | | main tcall.c:17 | | f1 tcall.c:13 | | f1 tcall.c:13 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:12 | | f1 tcall.c:12 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:11 | | | --29.17%-- f1 tcall.c:12 | f1 tcall.c:12 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:11 | f1 tcall.c:10 | main tcall.c:18 | main tcall.c:18 | main tcall.c:17 | main tcall.c:17 | f1 tcall.c:13 | f1 tcall.c:13 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:12 The default output is unchanged. This is only implemented in perf report, no change to record or anywhere else. This adds the basic code to report: - add a new "branch" option to the -g option parser to enable this mode - when the flag is set include the LBR into the callstack in machine.c. The rest of the history code is unchanged and doesn't know the difference between LBR entry and normal call entry. - detect overlaps with the callchain - remove small loop duplicates in the LBR Current limitations: - The LBR flags (mispredict etc.) are not shown in the history and LBR entries have no special marker. - It would be nice if annotate marked the LBR entries somehow (e.g. with arrows) v2: Various fixes. v3: Merge further patches into this one. Fix white space. v4: Improve manpage. Address review feedback. v5: Rename functions. Better error message without -g. Fix crash without -b. v6: Rebase v7: Rebase. Use NO_ENTRY in memset. v8: Port to latest tip. Move add_callchain_ip to separate patch. Skip initial entries in callchain. Minor cleanups. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-3-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-13 10:05:20 +08:00
if (err == -EINVAL)
break;
if (err)
return err;
}
chain_nr -= nr;
}
check_calls:
if (chain->nr > PERF_MAX_STACK_DEPTH) {
pr_warning("corrupted callchain. skipping...\n");
return 0;
}
perf callchain: Support handling complete branch stacks as histograms Currently branch stacks can be only shown as edge histograms for individual branches. I never found this display particularly useful. This implements an alternative mode that creates histograms over complete branch traces, instead of individual branches, similar to how normal callgraphs are handled. This is done by putting it in front of the normal callgraph and then using the normal callgraph histogram infrastructure to unify them. This way in complex functions we can understand the control flow that lead to a particular sample, and may even see some control flow in the caller for short functions. Example (simplified, of course for such simple code this is usually not needed), please run this after the whole patchkit is in, as at this point in the patch order there is no --branch-history, that will be added in a patch after this one: tcall.c: volatile a = 10000, b = 100000, c; __attribute__((noinline)) f2() { c = a / b; } __attribute__((noinline)) f1() { f2(); f2(); } main() { int i; for (i = 0; i < 1000000; i++) f1(); } % perf record -b -g ./tsrc/tcall [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.044 MB perf.data (~1923 samples) ] % perf report --no-children --branch-history ... 54.91% tcall.c:6 [.] f2 tcall | |--65.53%-- f2 tcall.c:5 | | | |--70.83%-- f1 tcall.c:11 | | f1 tcall.c:10 | | main tcall.c:18 | | main tcall.c:18 | | main tcall.c:17 | | main tcall.c:17 | | f1 tcall.c:13 | | f1 tcall.c:13 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:12 | | f1 tcall.c:12 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:11 | | | --29.17%-- f1 tcall.c:12 | f1 tcall.c:12 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:11 | f1 tcall.c:10 | main tcall.c:18 | main tcall.c:18 | main tcall.c:17 | main tcall.c:17 | f1 tcall.c:13 | f1 tcall.c:13 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:12 The default output is unchanged. This is only implemented in perf report, no change to record or anywhere else. This adds the basic code to report: - add a new "branch" option to the -g option parser to enable this mode - when the flag is set include the LBR into the callstack in machine.c. The rest of the history code is unchanged and doesn't know the difference between LBR entry and normal call entry. - detect overlaps with the callchain - remove small loop duplicates in the LBR Current limitations: - The LBR flags (mispredict etc.) are not shown in the history and LBR entries have no special marker. - It would be nice if annotate marked the LBR entries somehow (e.g. with arrows) v2: Various fixes. v3: Merge further patches into this one. Fix white space. v4: Improve manpage. Address review feedback. v5: Rename functions. Better error message without -g. Fix crash without -b. v6: Rebase v7: Rebase. Use NO_ENTRY in memset. v8: Port to latest tip. Move add_callchain_ip to separate patch. Skip initial entries in callchain. Minor cleanups. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-3-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-13 10:05:20 +08:00
for (i = first_call; i < chain_nr; i++) {
u64 ip;
if (callchain_param.order == ORDER_CALLEE)
perf tools powerpc: Adjust callchain based on DWARF debug info When saving the callchain on Power, the kernel conservatively saves excess entries in the callchain. A few of these entries are needed in some cases but not others. We should use the DWARF debug information to determine when the entries are needed. Eg: the value in the link register (LR) is needed only when it holds the return address of a function. At other times it must be ignored. If the unnecessary entries are not ignored, we end up with duplicate arcs in the call-graphs. Use the DWARF debug information to determine if any callchain entries should be ignored when building call-graphs. Callgraph before the patch: 14.67% 2234 sprintft libc-2.18.so [.] __random | --- __random | |--61.12%-- __random | | | |--97.15%-- rand | | do_my_sprintf | | main | | generic_start_main.isra.0 | | __libc_start_main | | 0x0 | | | --2.85%-- do_my_sprintf | main | generic_start_main.isra.0 | __libc_start_main | 0x0 | --38.88%-- rand | |--94.01%-- rand | do_my_sprintf | main | generic_start_main.isra.0 | __libc_start_main | 0x0 | --5.99%-- do_my_sprintf main generic_start_main.isra.0 __libc_start_main 0x0 Callgraph after the patch: 14.67% 2234 sprintft libc-2.18.so [.] __random | --- __random | |--95.93%-- rand | do_my_sprintf | main | generic_start_main.isra.0 | __libc_start_main | 0x0 | --4.07%-- do_my_sprintf main generic_start_main.isra.0 __libc_start_main 0x0 TODO: For split-debug info objects like glibc, we can only determine the call-frame-address only when both .eh_frame and .debug_info sections are available. We should be able to determin the CFA even without the .eh_frame section. Fix suggested by Anton Blanchard. Thanks to valuable input on DWARF debug information from Ulrich Weigand. Reported-by: Maynard Johnson <maynard@us.ibm.com> Tested-by: Maynard Johnson <maynard@us.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20140625154903.GA29607@us.ibm.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-06-25 23:49:03 +08:00
j = i;
else
perf tools powerpc: Adjust callchain based on DWARF debug info When saving the callchain on Power, the kernel conservatively saves excess entries in the callchain. A few of these entries are needed in some cases but not others. We should use the DWARF debug information to determine when the entries are needed. Eg: the value in the link register (LR) is needed only when it holds the return address of a function. At other times it must be ignored. If the unnecessary entries are not ignored, we end up with duplicate arcs in the call-graphs. Use the DWARF debug information to determine if any callchain entries should be ignored when building call-graphs. Callgraph before the patch: 14.67% 2234 sprintft libc-2.18.so [.] __random | --- __random | |--61.12%-- __random | | | |--97.15%-- rand | | do_my_sprintf | | main | | generic_start_main.isra.0 | | __libc_start_main | | 0x0 | | | --2.85%-- do_my_sprintf | main | generic_start_main.isra.0 | __libc_start_main | 0x0 | --38.88%-- rand | |--94.01%-- rand | do_my_sprintf | main | generic_start_main.isra.0 | __libc_start_main | 0x0 | --5.99%-- do_my_sprintf main generic_start_main.isra.0 __libc_start_main 0x0 Callgraph after the patch: 14.67% 2234 sprintft libc-2.18.so [.] __random | --- __random | |--95.93%-- rand | do_my_sprintf | main | generic_start_main.isra.0 | __libc_start_main | 0x0 | --4.07%-- do_my_sprintf main generic_start_main.isra.0 __libc_start_main 0x0 TODO: For split-debug info objects like glibc, we can only determine the call-frame-address only when both .eh_frame and .debug_info sections are available. We should be able to determin the CFA even without the .eh_frame section. Fix suggested by Anton Blanchard. Thanks to valuable input on DWARF debug information from Ulrich Weigand. Reported-by: Maynard Johnson <maynard@us.ibm.com> Tested-by: Maynard Johnson <maynard@us.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20140625154903.GA29607@us.ibm.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-06-25 23:49:03 +08:00
j = chain->nr - i - 1;
#ifdef HAVE_SKIP_CALLCHAIN_IDX
if (j == skip_idx)
continue;
#endif
ip = chain->ips[j];
err = add_callchain_ip(thread, parent, root_al, false, ip);
if (err)
return (err < 0) ? err : 0;
}
return 0;
}
static int unwind_entry(struct unwind_entry *entry, void *arg)
{
struct callchain_cursor *cursor = arg;
return callchain_cursor_append(cursor, entry->ip,
entry->map, entry->sym);
}
int thread__resolve_callchain(struct thread *thread,
struct perf_evsel *evsel,
struct perf_sample *sample,
struct symbol **parent,
struct addr_location *root_al,
int max_stack)
{
perf tools: Construct LBR call chain LBR call stack only has user-space callchains. It is output in the PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's still in the form of PERF_SAMPLE_CALLCHAIN. The perf tool has to handle both data sources to construct a complete callstack. For the "perf report -D" option, both lbr and fp information will be displayed. A new call chain recording option "lbr" is introduced into the perf tool for LBR call stack. The user can use --call-graph lbr to get the call stack information from hardware. Here are some examples. When profiling bc(1) on Fedora 19: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd If enabling LBR, perf report output looks like: 50.36% bc bc [.] bc_divide | --- bc_divide execute run_code yyparse main __libc_start_main _start 33.66% bc bc [.] _one_mult | --- _one_mult bc_divide execute run_code yyparse main __libc_start_main _start 7.62% bc bc [.] _bc_do_add | --- _bc_do_add | |--99.89%-- 0x2000186a8 --0.11%-- [...] 6.83% bc bc [.] _bc_do_sub | --- _bc_do_sub | |--99.94%-- bc_add | execute | run_code | yyparse | main | __libc_start_main | _start --0.06%-- [...] 0.46% bc libc-2.17.so [.] __memset_sse2 | --- __memset_sse2 | |--54.13%-- bc_new_num | | | |--51.00%-- bc_divide | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | |--30.46%-- _bc_do_sub | | bc_add | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | --18.55%-- _bc_do_add | bc_add | execute | run_code | yyparse | main | __libc_start_main | _start | --45.87%-- bc_divide execute run_code yyparse main __libc_start_main _start If using FP, perf report output looks like: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd 50.49% bc bc [.] bc_divide | --- bc_divide 33.57% bc bc [.] _one_mult | --- _one_mult 7.61% bc bc [.] _bc_do_add | --- _bc_do_add 0x2000186a8 6.88% bc bc [.] _bc_do_sub | --- _bc_do_sub 0.42% bc libc-2.17.so [.] __memcpy_ssse3_back | --- __memcpy_ssse3_back If using LBR, perf report -D output looks like: 3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0 ... LBR call chain: nr:8 ..... 0: fffffffffffffe00 ..... 1: 0000000000408e50 ..... 2: 000000000040a458 ..... 3: 000000000040562e ..... 4: 0000000000408590 ..... 5: 00000000004022c0 ..... 6: 00000000004015dd ..... 7: 0000003d1cc21b43 ... FP chain: nr:2 ..... 0: fffffffffffffe00 ..... 1: 0000000000408ea8 ... thread: bc:9748 ...... dso: /usr/bin/bc The LBR call stack has the following known limitations: - Zero length calls are not filtered out by the hardware - Exception handing such as setjmp/longjmp will have calls/returns not match - Pushing different return address onto the stack will have calls/returns not match - If callstack is deeper than the LBR, only the last entries are captured Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-06 02:23:05 +08:00
int ret = thread__resolve_callchain_sample(thread, evsel,
sample, parent,
root_al, max_stack);
if (ret)
return ret;
/* Can we do dwarf post unwind? */
if (!((evsel->attr.sample_type & PERF_SAMPLE_REGS_USER) &&
(evsel->attr.sample_type & PERF_SAMPLE_STACK_USER)))
return 0;
/* Bail out if nothing was captured. */
if ((!sample->user_regs.regs) ||
(!sample->user_stack.size))
return 0;
return unwind__get_entries(unwind_entry, &callchain_cursor,
thread, sample, max_stack);
}
int machine__for_each_thread(struct machine *machine,
int (*fn)(struct thread *thread, void *p),
void *priv)
{
struct rb_node *nd;
struct thread *thread;
int rc = 0;
for (nd = rb_first(&machine->threads); nd; nd = rb_next(nd)) {
thread = rb_entry(nd, struct thread, rb_node);
rc = fn(thread, priv);
if (rc != 0)
return rc;
}
list_for_each_entry(thread, &machine->dead_threads, node) {
rc = fn(thread, priv);
if (rc != 0)
return rc;
}
return rc;
}
int __machine__synthesize_threads(struct machine *machine, struct perf_tool *tool,
struct target *target, struct thread_map *threads,
perf_event__handler_t process, bool data_mmap)
{
if (target__has_task(target))
return perf_event__synthesize_thread_map(tool, threads, process, machine, data_mmap);
else if (target__has_cpu(target))
return perf_event__synthesize_threads(tool, process, machine, data_mmap);
/* command specified */
return 0;
}
pid_t machine__get_current_tid(struct machine *machine, int cpu)
{
if (cpu < 0 || cpu >= MAX_NR_CPUS || !machine->current_tid)
return -1;
return machine->current_tid[cpu];
}
int machine__set_current_tid(struct machine *machine, int cpu, pid_t pid,
pid_t tid)
{
struct thread *thread;
if (cpu < 0)
return -EINVAL;
if (!machine->current_tid) {
int i;
machine->current_tid = calloc(MAX_NR_CPUS, sizeof(pid_t));
if (!machine->current_tid)
return -ENOMEM;
for (i = 0; i < MAX_NR_CPUS; i++)
machine->current_tid[i] = -1;
}
if (cpu >= MAX_NR_CPUS) {
pr_err("Requested CPU %d too large. ", cpu);
pr_err("Consider raising MAX_NR_CPUS\n");
return -EINVAL;
}
machine->current_tid[cpu] = tid;
thread = machine__findnew_thread(machine, pid, tid);
if (!thread)
return -ENOMEM;
thread->cpu = cpu;
return 0;
}
int machine__get_kernel_start(struct machine *machine)
{
struct map *map = machine__kernel_map(machine, MAP__FUNCTION);
int err = 0;
/*
* The only addresses above 2^63 are kernel addresses of a 64-bit
* kernel. Note that addresses are unsigned so that on a 32-bit system
* all addresses including kernel addresses are less than 2^32. In
* that case (32-bit system), if the kernel mapping is unknown, all
* addresses will be assumed to be in user space - see
* machine__kernel_ip().
*/
machine->kernel_start = 1ULL << 63;
if (map) {
err = map__load(map, machine->symbol_filter);
if (map->start)
machine->kernel_start = map->start;
}
return err;
}