linux/arch/s390/mm/fault.c

646 lines
16 KiB
C
Raw Normal View History

/*
* S390 version
* Copyright IBM Corp. 1999
* Author(s): Hartmut Penner (hp@de.ibm.com)
* Ulrich Weigand (uweigand@de.ibm.com)
*
* Derived from "arch/i386/mm/fault.c"
* Copyright (C) 1995 Linus Torvalds
*/
#include <linux/kernel_stat.h>
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 18:02:48 +08:00
#include <linux/perf_event.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/compat.h>
#include <linux/smp.h>
#include <linux/kdebug.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/module.h>
#include <linux/hardirq.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
#include <linux/hugetlb.h>
#include <asm/asm-offsets.h>
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/facility.h>
#include "../kernel/entry.h"
#ifndef CONFIG_64BIT
#define __FAIL_ADDR_MASK 0x7ffff000
#define __SUBCODE_MASK 0x0200
#define __PF_RES_FIELD 0ULL
#else /* CONFIG_64BIT */
#define __FAIL_ADDR_MASK -4096L
#define __SUBCODE_MASK 0x0600
#define __PF_RES_FIELD 0x8000000000000000ULL
#endif /* CONFIG_64BIT */
#define VM_FAULT_BADCONTEXT 0x010000
#define VM_FAULT_BADMAP 0x020000
#define VM_FAULT_BADACCESS 0x040000
#define VM_FAULT_SIGNAL 0x080000
#define VM_FAULT_PFAULT 0x100000
static unsigned long store_indication __read_mostly;
#ifdef CONFIG_64BIT
static int __init fault_init(void)
{
if (test_facility(75))
store_indication = 0xc00;
return 0;
}
early_initcall(fault_init);
#endif
static inline int notify_page_fault(struct pt_regs *regs)
{
int ret = 0;
/* kprobe_running() needs smp_processor_id() */
if (kprobes_built_in() && !user_mode(regs)) {
preempt_disable();
if (kprobe_running() && kprobe_fault_handler(regs, 14))
ret = 1;
preempt_enable();
}
return ret;
}
/*
* Unlock any spinlocks which will prevent us from getting the
* message out.
*/
void bust_spinlocks(int yes)
{
if (yes) {
oops_in_progress = 1;
} else {
int loglevel_save = console_loglevel;
console_unblank();
oops_in_progress = 0;
/*
* OK, the message is on the console. Now we call printk()
* without oops_in_progress set so that printk will give klogd
* a poke. Hold onto your hats...
*/
console_loglevel = 15;
printk(" ");
console_loglevel = loglevel_save;
}
}
/*
* Returns the address space associated with the fault.
* Returns 0 for kernel space and 1 for user space.
*/
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 17:42:25 +08:00
static inline int user_space_fault(struct pt_regs *regs)
{
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 17:42:25 +08:00
unsigned long trans_exc_code;
/*
* The lowest two bits of the translation exception
* identification indicate which paging table was used.
*/
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 17:42:25 +08:00
trans_exc_code = regs->int_parm_long & 3;
if (trans_exc_code == 3) /* home space -> kernel */
return 0;
if (user_mode(regs))
return 1;
if (trans_exc_code == 2) /* secondary space -> set_fs */
return current->thread.mm_segment.ar4;
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 17:42:25 +08:00
if (current->flags & PF_VCPU)
return 1;
return 0;
}
static inline void report_user_fault(struct pt_regs *regs, long signr)
{
if ((task_pid_nr(current) > 1) && !show_unhandled_signals)
return;
if (!unhandled_signal(current, signr))
return;
if (!printk_ratelimit())
return;
printk(KERN_ALERT "User process fault: interruption code 0x%X ",
regs->int_code);
print_vma_addr(KERN_CONT "in ", regs->psw.addr & PSW_ADDR_INSN);
printk(KERN_CONT "\n");
printk(KERN_ALERT "failing address: %lX\n",
regs->int_parm_long & __FAIL_ADDR_MASK);
show_regs(regs);
}
/*
* Send SIGSEGV to task. This is an external routine
* to keep the stack usage of do_page_fault small.
*/
static noinline void do_sigsegv(struct pt_regs *regs, int si_code)
{
struct siginfo si;
report_user_fault(regs, SIGSEGV);
si.si_signo = SIGSEGV;
si.si_code = si_code;
si.si_addr = (void __user *)(regs->int_parm_long & __FAIL_ADDR_MASK);
force_sig_info(SIGSEGV, &si, current);
}
static noinline void do_no_context(struct pt_regs *regs)
{
const struct exception_table_entry *fixup;
unsigned long address;
/* Are we prepared to handle this kernel fault? */
fixup = search_exception_tables(regs->psw.addr & PSW_ADDR_INSN);
if (fixup) {
regs->psw.addr = extable_fixup(fixup) | PSW_ADDR_AMODE;
return;
}
/*
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice.
*/
address = regs->int_parm_long & __FAIL_ADDR_MASK;
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 17:42:25 +08:00
if (!user_space_fault(regs))
printk(KERN_ALERT "Unable to handle kernel pointer dereference"
" at virtual kernel address %p\n", (void *)address);
else
printk(KERN_ALERT "Unable to handle kernel paging request"
" at virtual user address %p\n", (void *)address);
die(regs, "Oops");
do_exit(SIGKILL);
}
static noinline void do_low_address(struct pt_regs *regs)
{
/* Low-address protection hit in kernel mode means
NULL pointer write access in kernel mode. */
if (regs->psw.mask & PSW_MASK_PSTATE) {
/* Low-address protection hit in user mode 'cannot happen'. */
die (regs, "Low-address protection");
do_exit(SIGKILL);
}
do_no_context(regs);
}
static noinline void do_sigbus(struct pt_regs *regs)
{
struct task_struct *tsk = current;
struct siginfo si;
/*
* Send a sigbus, regardless of whether we were in kernel
* or user mode.
*/
si.si_signo = SIGBUS;
si.si_errno = 0;
si.si_code = BUS_ADRERR;
si.si_addr = (void __user *)(regs->int_parm_long & __FAIL_ADDR_MASK);
force_sig_info(SIGBUS, &si, tsk);
}
static noinline void do_fault_error(struct pt_regs *regs, int fault)
{
int si_code;
switch (fault) {
case VM_FAULT_BADACCESS:
case VM_FAULT_BADMAP:
/* Bad memory access. Check if it is kernel or user space. */
if (user_mode(regs)) {
/* User mode accesses just cause a SIGSEGV */
si_code = (fault == VM_FAULT_BADMAP) ?
SEGV_MAPERR : SEGV_ACCERR;
do_sigsegv(regs, si_code);
return;
}
case VM_FAULT_BADCONTEXT:
case VM_FAULT_PFAULT:
do_no_context(regs);
break;
case VM_FAULT_SIGNAL:
if (!user_mode(regs))
do_no_context(regs);
break;
default: /* fault & VM_FAULT_ERROR */
if (fault & VM_FAULT_OOM) {
if (!user_mode(regs))
do_no_context(regs);
else
pagefault_out_of_memory();
} else if (fault & VM_FAULT_SIGBUS) {
/* Kernel mode? Handle exceptions or die */
if (!user_mode(regs))
do_no_context(regs);
else
do_sigbus(regs);
} else
BUG();
break;
}
}
/*
* This routine handles page faults. It determines the address,
* and the problem, and then passes it off to one of the appropriate
* routines.
*
* interruption code (int_code):
* 04 Protection -> Write-Protection (suprression)
* 10 Segment translation -> Not present (nullification)
* 11 Page translation -> Not present (nullification)
* 3b Region third trans. -> Not present (nullification)
*/
static inline int do_exception(struct pt_regs *regs, int access)
{
#ifdef CONFIG_PGSTE
struct gmap *gmap;
#endif
struct task_struct *tsk;
struct mm_struct *mm;
struct vm_area_struct *vma;
unsigned long trans_exc_code;
unsigned long address;
unsigned int flags;
int fault;
tsk = current;
/*
* The instruction that caused the program check has
* been nullified. Don't signal single step via SIGTRAP.
*/
clear_tsk_thread_flag(tsk, TIF_PER_TRAP);
if (notify_page_fault(regs))
return 0;
mm = tsk->mm;
trans_exc_code = regs->int_parm_long;
/*
* Verify that the fault happened in user space, that
* we are not in an interrupt and that there is a
* user context.
*/
fault = VM_FAULT_BADCONTEXT;
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 17:42:25 +08:00
if (unlikely(!user_space_fault(regs) || in_atomic() || !mm))
goto out;
address = trans_exc_code & __FAIL_ADDR_MASK;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
if (user_mode(regs))
flags |= FAULT_FLAG_USER;
if (access == VM_WRITE || (trans_exc_code & store_indication) == 0x400)
flags |= FAULT_FLAG_WRITE;
down_read(&mm->mmap_sem);
#ifdef CONFIG_PGSTE
gmap = (struct gmap *)
((current->flags & PF_VCPU) ? S390_lowcore.gmap : 0);
if (gmap) {
address = __gmap_fault(address, gmap);
if (address == -EFAULT) {
fault = VM_FAULT_BADMAP;
goto out_up;
}
if (address == -ENOMEM) {
fault = VM_FAULT_OOM;
goto out_up;
}
if (gmap->pfault_enabled)
flags |= FAULT_FLAG_RETRY_NOWAIT;
}
#endif
retry:
fault = VM_FAULT_BADMAP;
vma = find_vma(mm, address);
if (!vma)
goto out_up;
[S390] noexec protection This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-06 04:18:17 +08:00
if (unlikely(vma->vm_start > address)) {
if (!(vma->vm_flags & VM_GROWSDOWN))
goto out_up;
if (expand_stack(vma, address))
goto out_up;
}
/*
* Ok, we have a good vm_area for this memory access, so
* we can handle it..
*/
fault = VM_FAULT_BADACCESS;
if (unlikely(!(vma->vm_flags & access)))
goto out_up;
if (is_vm_hugetlb_page(vma))
address &= HPAGE_MASK;
/*
* If for any reason at all we couldn't handle the fault,
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
fault = handle_mm_fault(mm, vma, address, flags);
/* No reason to continue if interrupted by SIGKILL. */
if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) {
fault = VM_FAULT_SIGNAL;
goto out;
}
if (unlikely(fault & VM_FAULT_ERROR))
goto out_up;
/*
* Major/minor page fault accounting is only done on the
* initial attempt. If we go through a retry, it is extremely
* likely that the page will be found in page cache at that point.
*/
if (flags & FAULT_FLAG_ALLOW_RETRY) {
if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
regs, address);
} else {
tsk->min_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
regs, address);
}
if (fault & VM_FAULT_RETRY) {
#ifdef CONFIG_PGSTE
if (gmap && (flags & FAULT_FLAG_RETRY_NOWAIT)) {
/* FAULT_FLAG_RETRY_NOWAIT has been set,
* mmap_sem has not been released */
current->thread.gmap_pfault = 1;
fault = VM_FAULT_PFAULT;
goto out_up;
}
#endif
/* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk
* of starvation. */
flags &= ~(FAULT_FLAG_ALLOW_RETRY |
FAULT_FLAG_RETRY_NOWAIT);
flags |= FAULT_FLAG_TRIED;
down_read(&mm->mmap_sem);
goto retry;
}
}
fault = 0;
out_up:
up_read(&mm->mmap_sem);
out:
return fault;
}
void __kprobes do_protection_exception(struct pt_regs *regs)
{
unsigned long trans_exc_code;
int fault;
trans_exc_code = regs->int_parm_long;
/*
* Protection exceptions are suppressing, decrement psw address.
* The exception to this rule are aborted transactions, for these
* the PSW already points to the correct location.
*/
if (!(regs->int_code & 0x200))
regs->psw.addr = __rewind_psw(regs->psw, regs->int_code >> 16);
/*
* Check for low-address protection. This needs to be treated
* as a special case because the translation exception code
* field is not guaranteed to contain valid data in this case.
*/
if (unlikely(!(trans_exc_code & 4))) {
do_low_address(regs);
return;
}
fault = do_exception(regs, VM_WRITE);
if (unlikely(fault))
do_fault_error(regs, fault);
}
void __kprobes do_dat_exception(struct pt_regs *regs)
{
int access, fault;
access = VM_READ | VM_EXEC | VM_WRITE;
fault = do_exception(regs, access);
if (unlikely(fault))
do_fault_error(regs, fault);
}
#ifdef CONFIG_PFAULT
/*
* 'pfault' pseudo page faults routines.
*/
static int pfault_disable;
static int __init nopfault(char *str)
{
pfault_disable = 1;
return 1;
}
__setup("nopfault", nopfault);
struct pfault_refbk {
u16 refdiagc;
u16 reffcode;
u16 refdwlen;
u16 refversn;
u64 refgaddr;
u64 refselmk;
u64 refcmpmk;
u64 reserved;
} __attribute__ ((packed, aligned(8)));
int pfault_init(void)
{
struct pfault_refbk refbk = {
.refdiagc = 0x258,
.reffcode = 0,
.refdwlen = 5,
.refversn = 2,
.refgaddr = __LC_CURRENT_PID,
.refselmk = 1ULL << 48,
.refcmpmk = 1ULL << 48,
.reserved = __PF_RES_FIELD };
int rc;
if (pfault_disable)
return -1;
asm volatile(
" diag %1,%0,0x258\n"
"0: j 2f\n"
"1: la %0,8\n"
"2:\n"
EX_TABLE(0b,1b)
: "=d" (rc) : "a" (&refbk), "m" (refbk) : "cc");
return rc;
}
void pfault_fini(void)
{
struct pfault_refbk refbk = {
.refdiagc = 0x258,
.reffcode = 1,
.refdwlen = 5,
.refversn = 2,
};
if (pfault_disable)
return;
asm volatile(
" diag %0,0,0x258\n"
"0:\n"
EX_TABLE(0b,0b)
: : "a" (&refbk), "m" (refbk) : "cc");
}
static DEFINE_SPINLOCK(pfault_lock);
static LIST_HEAD(pfault_list);
static void pfault_interrupt(struct ext_code ext_code,
unsigned int param32, unsigned long param64)
{
struct task_struct *tsk;
__u16 subcode;
pid_t pid;
/*
* Get the external interruption subcode & pfault
* initial/completion signal bit. VM stores this
* in the 'cpu address' field associated with the
* external interrupt.
*/
subcode = ext_code.subcode;
if ((subcode & 0xff00) != __SUBCODE_MASK)
return;
inc_irq_stat(IRQEXT_PFL);
/* Get the token (= pid of the affected task). */
pid = sizeof(void *) == 4 ? param32 : param64;
rcu_read_lock();
tsk = find_task_by_pid_ns(pid, &init_pid_ns);
if (tsk)
get_task_struct(tsk);
rcu_read_unlock();
if (!tsk)
return;
spin_lock(&pfault_lock);
if (subcode & 0x0080) {
/* signal bit is set -> a page has been swapped in by VM */
if (tsk->thread.pfault_wait == 1) {
/* Initial interrupt was faster than the completion
* interrupt. pfault_wait is valid. Set pfault_wait
* back to zero and wake up the process. This can
* safely be done because the task is still sleeping
* and can't produce new pfaults. */
tsk->thread.pfault_wait = 0;
list_del(&tsk->thread.list);
wake_up_process(tsk);
put_task_struct(tsk);
} else {
/* Completion interrupt was faster than initial
* interrupt. Set pfault_wait to -1 so the initial
* interrupt doesn't put the task to sleep.
* If the task is not running, ignore the completion
* interrupt since it must be a leftover of a PFAULT
* CANCEL operation which didn't remove all pending
* completion interrupts. */
if (tsk->state == TASK_RUNNING)
tsk->thread.pfault_wait = -1;
}
} else {
/* signal bit not set -> a real page is missing. */
if (WARN_ON_ONCE(tsk != current))
goto out;
if (tsk->thread.pfault_wait == 1) {
/* Already on the list with a reference: put to sleep */
__set_task_state(tsk, TASK_UNINTERRUPTIBLE);
set_tsk_need_resched(tsk);
} else if (tsk->thread.pfault_wait == -1) {
/* Completion interrupt was faster than the initial
* interrupt (pfault_wait == -1). Set pfault_wait
* back to zero and exit. */
tsk->thread.pfault_wait = 0;
} else {
/* Initial interrupt arrived before completion
* interrupt. Let the task sleep.
* An extra task reference is needed since a different
* cpu may set the task state to TASK_RUNNING again
* before the scheduler is reached. */
get_task_struct(tsk);
tsk->thread.pfault_wait = 1;
list_add(&tsk->thread.list, &pfault_list);
__set_task_state(tsk, TASK_UNINTERRUPTIBLE);
set_tsk_need_resched(tsk);
}
}
out:
spin_unlock(&pfault_lock);
put_task_struct(tsk);
}
2013-06-19 05:04:52 +08:00
static int pfault_cpu_notify(struct notifier_block *self, unsigned long action,
void *hcpu)
{
struct thread_struct *thread, *next;
struct task_struct *tsk;
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_DEAD:
spin_lock_irq(&pfault_lock);
list_for_each_entry_safe(thread, next, &pfault_list, list) {
thread->pfault_wait = 0;
list_del(&thread->list);
tsk = container_of(thread, struct task_struct, thread);
wake_up_process(tsk);
put_task_struct(tsk);
}
spin_unlock_irq(&pfault_lock);
break;
default:
break;
}
return NOTIFY_OK;
}
static int __init pfault_irq_init(void)
{
int rc;
rc = register_external_irq(EXT_IRQ_CP_SERVICE, pfault_interrupt);
if (rc)
goto out_extint;
rc = pfault_init() == 0 ? 0 : -EOPNOTSUPP;
if (rc)
goto out_pfault;
irq_subclass_register(IRQ_SUBCLASS_SERVICE_SIGNAL);
hotcpu_notifier(pfault_cpu_notify, 0);
return 0;
out_pfault:
unregister_external_irq(EXT_IRQ_CP_SERVICE, pfault_interrupt);
out_extint:
pfault_disable = 1;
return rc;
}
early_initcall(pfault_irq_init);
#endif /* CONFIG_PFAULT */