linux/drivers/edac/Kconfig

320 lines
9.6 KiB
Plaintext
Raw Normal View History

#
# EDAC Kconfig
# Copyright (c) 2008 Doug Thompson www.softwarebitmaker.com
# Licensed and distributed under the GPL
#
menuconfig EDAC
bool "EDAC (Error Detection And Correction) reporting"
depends on HAS_IOMEM
depends on X86 || PPC || TILE || ARM
help
EDAC is designed to report errors in the core system.
These are low-level errors that are reported in the CPU or
supporting chipset or other subsystems:
memory errors, cache errors, PCI errors, thermal throttling, etc..
If unsure, select 'Y'.
If this code is reporting problems on your system, please
see the EDAC project web pages for more information at:
<http://bluesmoke.sourceforge.net/>
and:
<http://buttersideup.com/edacwiki>
There is also a mailing list for the EDAC project, which can
be found via the sourceforge page.
if EDAC
comment "Reporting subsystems"
config EDAC_LEGACY_SYSFS
bool "EDAC legacy sysfs"
default y
help
Enable the compatibility sysfs nodes.
Use 'Y' if your edac utilities aren't ported to work with the newer
structures.
config EDAC_DEBUG
bool "Debugging"
help
This turns on debugging information for the entire EDAC
sub-system. You can insert module with "debug_level=x", current
there're four debug levels (x=0,1,2,3 from low to high).
Usually you should select 'N'.
config EDAC_DECODE_MCE
tristate "Decode MCEs in human-readable form (only on AMD for now)"
depends on CPU_SUP_AMD && X86_MCE_AMD
default y
---help---
Enable this option if you want to decode Machine Check Exceptions
occurring on your machine in human-readable form.
You should definitely say Y here in case you want to decode MCEs
which occur really early upon boot, before the module infrastructure
has been initialized.
config EDAC_MCE_INJ
tristate "Simple MCE injection interface over /sysfs"
depends on EDAC_DECODE_MCE
default n
help
This is a simple interface to inject MCEs over /sysfs and test
the MCE decoding code in EDAC.
This is currently AMD-only.
config EDAC_MM_EDAC
tristate "Main Memory EDAC (Error Detection And Correction) reporting"
help
Some systems are able to detect and correct errors in main
memory. EDAC can report statistics on memory error
detection and correction (EDAC - or commonly referred to ECC
errors). EDAC will also try to decode where these errors
occurred so that a particular failing memory module can be
replaced. If unsure, select 'Y'.
config EDAC_AMD64
tristate "AMD64 (Opteron, Athlon64) K8, F10h"
depends on EDAC_MM_EDAC && AMD_NB && X86_64 && EDAC_DECODE_MCE
help
Support for error detection and correction of DRAM ECC errors on
the AMD64 families of memory controllers (K8 and F10h)
config EDAC_AMD64_ERROR_INJECTION
bool "Sysfs HW Error injection facilities"
depends on EDAC_AMD64
help
Recent Opterons (Family 10h and later) provide for Memory Error
Injection into the ECC detection circuits. The amd64_edac module
allows the operator/user to inject Uncorrectable and Correctable
errors into DRAM.
When enabled, in each of the respective memory controller directories
(/sys/devices/system/edac/mc/mcX), there are 3 input files:
- inject_section (0..3, 16-byte section of 64-byte cacheline),
- inject_word (0..8, 16-bit word of 16-byte section),
- inject_ecc_vector (hex ecc vector: select bits of inject word)
In addition, there are two control files, inject_read and inject_write,
which trigger the DRAM ECC Read and Write respectively.
config EDAC_AMD76X
tristate "AMD 76x (760, 762, 768)"
depends on EDAC_MM_EDAC && PCI && X86_32
help
Support for error detection and correction on the AMD 76x
series of chipsets used with the Athlon processor.
config EDAC_E7XXX
tristate "Intel e7xxx (e7205, e7500, e7501, e7505)"
depends on EDAC_MM_EDAC && PCI && X86_32
help
Support for error detection and correction on the Intel
E7205, E7500, E7501 and E7505 server chipsets.
config EDAC_E752X
tristate "Intel e752x (e7520, e7525, e7320) and 3100"
depends on EDAC_MM_EDAC && PCI && X86 && HOTPLUG
help
Support for error detection and correction on the Intel
E7520, E7525, E7320 server chipsets.
config EDAC_I82443BXGX
tristate "Intel 82443BX/GX (440BX/GX)"
depends on EDAC_MM_EDAC && PCI && X86_32
depends on BROKEN
help
Support for error detection and correction on the Intel
82443BX/GX memory controllers (440BX/GX chipsets).
config EDAC_I82875P
tristate "Intel 82875p (D82875P, E7210)"
depends on EDAC_MM_EDAC && PCI && X86_32
help
Support for error detection and correction on the Intel
DP82785P and E7210 server chipsets.
config EDAC_I82975X
tristate "Intel 82975x (D82975x)"
depends on EDAC_MM_EDAC && PCI && X86
help
Support for error detection and correction on the Intel
DP82975x server chipsets.
config EDAC_I3000
tristate "Intel 3000/3010"
depends on EDAC_MM_EDAC && PCI && X86
help
Support for error detection and correction on the Intel
3000 and 3010 server chipsets.
config EDAC_I3200
tristate "Intel 3200"
depends on EDAC_MM_EDAC && PCI && X86 && EXPERIMENTAL
help
Support for error detection and correction on the Intel
3200 and 3210 server chipsets.
config EDAC_X38
tristate "Intel X38"
depends on EDAC_MM_EDAC && PCI && X86
help
Support for error detection and correction on the Intel
X38 server chipsets.
config EDAC_I5400
tristate "Intel 5400 (Seaburg) chipsets"
depends on EDAC_MM_EDAC && PCI && X86
help
Support for error detection and correction the Intel
i5400 MCH chipset (Seaburg).
config EDAC_I7CORE
tristate "Intel i7 Core (Nehalem) processors"
depends on EDAC_MM_EDAC && PCI && X86 && X86_MCE_INTEL
help
Support for error detection and correction the Intel
i7 Core (Nehalem) Integrated Memory Controller that exists on
newer processors like i7 Core, i7 Core Extreme, Xeon 35xx
and Xeon 55xx processors.
config EDAC_I82860
tristate "Intel 82860"
depends on EDAC_MM_EDAC && PCI && X86_32
help
Support for error detection and correction on the Intel
82860 chipset.
config EDAC_R82600
tristate "Radisys 82600 embedded chipset"
depends on EDAC_MM_EDAC && PCI && X86_32
help
Support for error detection and correction on the Radisys
82600 embedded chipset.
config EDAC_I5000
tristate "Intel Greencreek/Blackford chipset"
depends on EDAC_MM_EDAC && X86 && PCI
help
Support for error detection and correction the Intel
Greekcreek/Blackford chipsets.
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
config EDAC_I5100
tristate "Intel San Clemente MCH"
depends on EDAC_MM_EDAC && X86 && PCI
help
Support for error detection and correction the Intel
San Clemente MCH.
config EDAC_I7300
tristate "Intel Clarksboro MCH"
depends on EDAC_MM_EDAC && X86 && PCI
help
Support for error detection and correction the Intel
Clarksboro MCH (Intel 7300 chipset).
config EDAC_SBRIDGE
tristate "Intel Sandy-Bridge Integrated MC"
depends on EDAC_MM_EDAC && PCI && X86_64 && X86_MCE_INTEL
depends on PCI_MMCONFIG && EXPERIMENTAL
help
Support for error detection and correction the Intel
Sandy Bridge Integrated Memory Controller.
config EDAC_MPC85XX
tristate "Freescale MPC83xx / MPC85xx"
depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || PPC_85xx)
help
Support for error detection and correction on the Freescale
MPC8349, MPC8560, MPC8540, MPC8548
config EDAC_MV64X60
tristate "Marvell MV64x60"
depends on EDAC_MM_EDAC && MV64X60
help
Support for error detection and correction on the Marvell
MV64360 and MV64460 chipsets.
config EDAC_PASEMI
tristate "PA Semi PWRficient"
depends on EDAC_MM_EDAC && PCI
depends on PPC_PASEMI
help
Support for error detection and correction on PA Semi
PWRficient.
config EDAC_CELL
tristate "Cell Broadband Engine memory controller"
depends on EDAC_MM_EDAC && PPC_CELL_COMMON
help
Support for error detection and correction on the
Cell Broadband Engine internal memory controller
on platform without a hypervisor
config EDAC_PPC4XX
tristate "PPC4xx IBM DDR2 Memory Controller"
depends on EDAC_MM_EDAC && 4xx
help
This enables support for EDAC on the ECC memory used
with the IBM DDR2 memory controller found in various
PowerPC 4xx embedded processors such as the 405EX[r],
440SP, 440SPe, 460EX, 460GT and 460SX.
config EDAC_AMD8131
tristate "AMD8131 HyperTransport PCI-X Tunnel"
depends on EDAC_MM_EDAC && PCI && PPC_MAPLE
help
Support for error detection and correction on the
AMD8131 HyperTransport PCI-X Tunnel chip.
Note, add more Kconfig dependency if it's adopted
on some machine other than Maple.
config EDAC_AMD8111
tristate "AMD8111 HyperTransport I/O Hub"
depends on EDAC_MM_EDAC && PCI && PPC_MAPLE
help
Support for error detection and correction on the
AMD8111 HyperTransport I/O Hub chip.
Note, add more Kconfig dependency if it's adopted
on some machine other than Maple.
config EDAC_CPC925
tristate "IBM CPC925 Memory Controller (PPC970FX)"
depends on EDAC_MM_EDAC && PPC64
help
Support for error detection and correction on the
IBM CPC925 Bridge and Memory Controller, which is
a companion chip to the PowerPC 970 family of
processors.
config EDAC_TILE
tristate "Tilera Memory Controller"
depends on EDAC_MM_EDAC && TILE
default y
help
Support for error detection and correction on the
Tilera memory controller.
config EDAC_HIGHBANK_MC
tristate "Highbank Memory Controller"
depends on EDAC_MM_EDAC && ARCH_HIGHBANK
help
Support for error detection and correction on the
Calxeda Highbank memory controller.
config EDAC_HIGHBANK_L2
tristate "Highbank L2 Cache"
depends on EDAC_MM_EDAC && ARCH_HIGHBANK
help
Support for error detection and correction on the
Calxeda Highbank memory controller.
endif # EDAC