linux/arch/sh/boards/mach-kfr2r09/setup.c

650 lines
16 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* KFR2R09 board support code
*
* Copyright (C) 2009 Magnus Damm
*/
#include <asm/clock.h>
#include <asm/io.h>
#include <asm/machvec.h>
#include <asm/suspend.h>
#include <cpu/sh7724.h>
#include <linux/clkdev.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/interrupt.h>
#include <linux/memblock.h>
#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_data/lv5207lp.h>
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/sh_intc.h>
#include <linux/usb/r8a66597.h>
#include <linux/videodev2.h>
#include <mach/kfr2r09.h>
#include <media/drv-intf/renesas-ceu.h>
[media] include/media: split I2C headers from V4L2 core Currently, include/media is messy, as it contains both the V4L2 core headers and some driver-specific headers on the same place. That makes harder to identify what core headers should be documented and what headers belong to I2C drivers that are included only by bridge/main drivers that would require the functions provided by them. Let's move those i2c specific files to its own subdirectory. The files to move were produced via the following script: mkdir include/media/i2c (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/*/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) for i in include/media/*.h; do n=`basename $i`; (for j in $(git grep -l $n); do dirname $j; done)|sort|uniq|grep -ve '^.$' > list; num=$(wc -l list|cut -d' ' -f1); if [ $num == 1 ]; then if [ "`grep i2c list`" != "" ]; then git mv $i include/media/i2c; fi; fi; done And the references corrected via this script: MAIN_DIR="media/" PREV_DIR="media/" DIRS="i2c/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Merged Sakari Ailus patch that moves smiapp.h to include/media/i2c. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-11-10 22:01:44 +08:00
#include <media/i2c/rj54n1cb0c.h>
#include <video/sh_mobile_lcdc.h>
#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
static phys_addr_t ceu_dma_membase;
/* set VIO_CKO clock to 25MHz */
#define CEU_MCLK_FREQ 25000000
#define DRVCRB 0xA405018C
static struct mtd_partition kfr2r09_nor_flash_partitions[] =
{
{
.name = "boot",
.offset = 0,
.size = (4 * 1024 * 1024),
.mask_flags = MTD_WRITEABLE, /* Read-only */
},
{
.name = "other",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static struct physmap_flash_data kfr2r09_nor_flash_data = {
.width = 2,
.parts = kfr2r09_nor_flash_partitions,
.nr_parts = ARRAY_SIZE(kfr2r09_nor_flash_partitions),
};
static struct resource kfr2r09_nor_flash_resources[] = {
[0] = {
.name = "NOR Flash",
.start = 0x00000000,
.end = 0x03ffffff,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device kfr2r09_nor_flash_device = {
.name = "physmap-flash",
.resource = kfr2r09_nor_flash_resources,
.num_resources = ARRAY_SIZE(kfr2r09_nor_flash_resources),
.dev = {
.platform_data = &kfr2r09_nor_flash_data,
},
};
static struct resource kfr2r09_nand_flash_resources[] = {
[0] = {
.name = "NAND Flash",
.start = 0x10000000,
.end = 0x1001ffff,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device kfr2r09_nand_flash_device = {
.name = "onenand-flash",
.resource = kfr2r09_nand_flash_resources,
.num_resources = ARRAY_SIZE(kfr2r09_nand_flash_resources),
};
static struct sh_keysc_info kfr2r09_sh_keysc_info = {
.mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
.scan_timing = 3,
.delay = 10,
.keycodes = {
KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER,
KEY_1, KEY_2, KEY_3, 0, KEY_UP,
KEY_4, KEY_5, KEY_6, 0, KEY_LEFT,
KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT,
KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN,
0, 0, 0, 0, 0
},
};
static struct resource kfr2r09_sh_keysc_resources[] = {
[0] = {
.name = "KEYSC",
.start = 0x044b0000,
.end = 0x044b000f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = evt2irq(0xbe0),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device kfr2r09_sh_keysc_device = {
.name = "sh_keysc",
.id = 0, /* "keysc0" clock */
.num_resources = ARRAY_SIZE(kfr2r09_sh_keysc_resources),
.resource = kfr2r09_sh_keysc_resources,
.dev = {
.platform_data = &kfr2r09_sh_keysc_info,
},
};
static const struct fb_videomode kfr2r09_lcdc_modes[] = {
{
.name = "TX07D34VM0AAA",
.xres = 240,
.yres = 400,
.left_margin = 0,
.right_margin = 16,
.hsync_len = 8,
.upper_margin = 0,
.lower_margin = 1,
.vsync_len = 1,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
};
static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
.clock_source = LCDC_CLK_BUS,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
.fourcc = V4L2_PIX_FMT_RGB565,
.interface_type = SYS18,
.clock_divider = 6,
.flags = LCDC_FLAGS_DWPOL,
.lcd_modes = kfr2r09_lcdc_modes,
.num_modes = ARRAY_SIZE(kfr2r09_lcdc_modes),
.panel_cfg = {
.width = 35,
.height = 58,
.setup_sys = kfr2r09_lcd_setup,
.start_transfer = kfr2r09_lcd_start,
},
.sys_bus_cfg = {
.ldmt2r = 0x07010904,
.ldmt3r = 0x14012914,
/* set 1s delay to encourage fsync() */
.deferred_io_msec = 1000,
},
}
};
static struct resource kfr2r09_sh_lcdc_resources[] = {
[0] = {
.name = "LCDC",
.start = 0xfe940000, /* P4-only space */
.end = 0xfe942fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = evt2irq(0xf40),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device kfr2r09_sh_lcdc_device = {
.name = "sh_mobile_lcdc_fb",
.num_resources = ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
.resource = kfr2r09_sh_lcdc_resources,
.dev = {
.platform_data = &kfr2r09_sh_lcdc_info,
},
};
static struct lv5207lp_platform_data kfr2r09_backlight_data = {
.fbdev = &kfr2r09_sh_lcdc_device.dev,
.def_value = 13,
.max_value = 13,
};
static struct i2c_board_info kfr2r09_backlight_board_info = {
I2C_BOARD_INFO("lv5207lp", 0x75),
.platform_data = &kfr2r09_backlight_data,
};
static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
.on_chip = 1,
};
static struct resource kfr2r09_usb0_gadget_resources[] = {
[0] = {
.start = 0x04d80000,
.end = 0x04d80123,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = evt2irq(0xa20),
.end = evt2irq(0xa20),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
},
};
static struct platform_device kfr2r09_usb0_gadget_device = {
.name = "r8a66597_udc",
.id = 0,
.dev = {
.dma_mask = NULL, /* not use dma */
.coherent_dma_mask = 0xffffffff,
.platform_data = &kfr2r09_usb0_gadget_data,
},
.num_resources = ARRAY_SIZE(kfr2r09_usb0_gadget_resources),
.resource = kfr2r09_usb0_gadget_resources,
};
static struct ceu_platform_data ceu_pdata = {
.num_subdevs = 1,
.subdevs = {
{ /* [0] = rj54n1cb0c */
.flags = 0,
.bus_width = 8,
.bus_shift = 0,
.i2c_adapter_id = 1,
.i2c_address = 0x50,
},
},
};
static struct resource kfr2r09_ceu_resources[] = {
[0] = {
.name = "CEU",
.start = 0xfe910000,
.end = 0xfe91009f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = evt2irq(0x880),
.end = evt2irq(0x880),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device kfr2r09_ceu_device = {
.name = "renesas-ceu",
.id = 0, /* "ceu0" clock */
.num_resources = ARRAY_SIZE(kfr2r09_ceu_resources),
.resource = kfr2r09_ceu_resources,
.dev = {
.platform_data = &ceu_pdata,
},
};
static struct rj54n1_pdata rj54n1_priv = {
.mclk_freq = CEU_MCLK_FREQ,
.ioctl_high = false,
};
static struct i2c_board_info kfr2r09_i2c_camera = {
I2C_BOARD_INFO("rj54n1cb0c", 0x50),
.platform_data = &rj54n1_priv,
};
static struct gpiod_lookup_table rj54n1_gpios = {
.dev_id = "1-0050",
.table = {
GPIO_LOOKUP("sh7724_pfc", GPIO_PTB4, "poweron",
GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("sh7724_pfc", GPIO_PTB7, "enable",
GPIO_ACTIVE_HIGH),
},
};
/* Fixed 3.3V regulator to be used by SDHI0 */
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
};
static struct resource kfr2r09_sh_sdhi0_resources[] = {
[0] = {
.name = "SDHI0",
.start = 0x04ce0000,
.end = 0x04ce00ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = evt2irq(0xe80),
.flags = IORESOURCE_IRQ,
},
};
static struct tmio_mmc_data sh7724_sdhi0_data = {
.chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
.chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
.capabilities = MMC_CAP_SDIO_IRQ,
.capabilities2 = MMC_CAP2_NO_WRITE_PROTECT,
};
static struct platform_device kfr2r09_sh_sdhi0_device = {
.name = "sh_mobile_sdhi",
.num_resources = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources),
.resource = kfr2r09_sh_sdhi0_resources,
.dev = {
.platform_data = &sh7724_sdhi0_data,
},
};
static struct platform_device *kfr2r09_devices[] __initdata = {
&kfr2r09_nor_flash_device,
&kfr2r09_nand_flash_device,
&kfr2r09_sh_keysc_device,
&kfr2r09_sh_lcdc_device,
&kfr2r09_sh_sdhi0_device,
};
#define BSC_CS0BCR 0xfec10004
#define BSC_CS0WCR 0xfec10024
#define BSC_CS4BCR 0xfec10010
#define BSC_CS4WCR 0xfec10030
#define PORT_MSELCRB 0xa4050182
#ifdef CONFIG_I2C
static int kfr2r09_usb0_gadget_i2c_setup(void)
{
struct i2c_adapter *a;
struct i2c_msg msg;
unsigned char buf[2];
int ret;
a = i2c_get_adapter(0);
if (!a)
return -ENODEV;
/* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
buf[0] = 0x13;
msg.addr = 0x09;
msg.buf = buf;
msg.len = 1;
msg.flags = 0;
ret = i2c_transfer(a, &msg, 1);
if (ret != 1)
return -ENODEV;
buf[0] = 0;
msg.addr = 0x09;
msg.buf = buf;
msg.len = 1;
msg.flags = I2C_M_RD;
ret = i2c_transfer(a, &msg, 1);
if (ret != 1)
return -ENODEV;
buf[1] = buf[0] | (1 << 1);
buf[0] = 0x13;
msg.addr = 0x09;
msg.buf = buf;
msg.len = 2;
msg.flags = 0;
ret = i2c_transfer(a, &msg, 1);
if (ret != 1)
return -ENODEV;
return 0;
}
static int kfr2r09_serial_i2c_setup(void)
{
struct i2c_adapter *a;
struct i2c_msg msg;
unsigned char buf[2];
int ret;
a = i2c_get_adapter(0);
if (!a)
return -ENODEV;
/* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */
buf[0] = 0x13;
msg.addr = 0x09;
msg.buf = buf;
msg.len = 1;
msg.flags = 0;
ret = i2c_transfer(a, &msg, 1);
if (ret != 1)
return -ENODEV;
buf[0] = 0;
msg.addr = 0x09;
msg.buf = buf;
msg.len = 1;
msg.flags = I2C_M_RD;
ret = i2c_transfer(a, &msg, 1);
if (ret != 1)
return -ENODEV;
buf[1] = buf[0] | (1 << 6);
buf[0] = 0x13;
msg.addr = 0x09;
msg.buf = buf;
msg.len = 2;
msg.flags = 0;
ret = i2c_transfer(a, &msg, 1);
if (ret != 1)
return -ENODEV;
return 0;
}
#else
static int kfr2r09_usb0_gadget_i2c_setup(void)
{
return -ENODEV;
}
static int kfr2r09_serial_i2c_setup(void)
{
return -ENODEV;
}
#endif
static int kfr2r09_usb0_gadget_setup(void)
{
int plugged_in;
gpio_request(GPIO_PTN4, NULL); /* USB_DET */
gpio_direction_input(GPIO_PTN4);
plugged_in = gpio_get_value(GPIO_PTN4);
if (!plugged_in)
return -ENODEV; /* no cable plugged in */
if (kfr2r09_usb0_gadget_i2c_setup() != 0)
return -ENODEV; /* unable to configure using i2c */
__raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
msleep(20); /* wait 20ms to let the clock settle */
clk_enable(clk_get(NULL, "usb0"));
__raw_writew(0x0600, 0xa40501d4);
return 0;
}
extern char kfr2r09_sdram_enter_start;
extern char kfr2r09_sdram_enter_end;
extern char kfr2r09_sdram_leave_start;
extern char kfr2r09_sdram_leave_end;
static int __init kfr2r09_devices_setup(void)
{
struct clk *camera_clk;
/* register board specific self-refresh code */
sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
SUSP_SH_RSTANDBY,
&kfr2r09_sdram_enter_start,
&kfr2r09_sdram_enter_end,
&kfr2r09_sdram_leave_start,
&kfr2r09_sdram_leave_end);
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
/* enable SCIF1 serial port for YC401 console support */
gpio_request(GPIO_FN_SCIF1_RXD, NULL);
gpio_request(GPIO_FN_SCIF1_TXD, NULL);
kfr2r09_serial_i2c_setup(); /* ECONTMSK(bit6=L10ONEN) set 1 */
gpio_request(GPIO_PTG3, NULL); /* HPON_ON */
gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */
/* setup NOR flash at CS0 */
__raw_writel(0x36db0400, BSC_CS0BCR);
__raw_writel(0x00000500, BSC_CS0WCR);
/* setup NAND flash at CS4 */
__raw_writel(0x36db0400, BSC_CS4BCR);
__raw_writel(0x00000500, BSC_CS4WCR);
/* setup KEYSC pins */
gpio_request(GPIO_FN_KEYOUT0, NULL);
gpio_request(GPIO_FN_KEYOUT1, NULL);
gpio_request(GPIO_FN_KEYOUT2, NULL);
gpio_request(GPIO_FN_KEYOUT3, NULL);
gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
gpio_request(GPIO_FN_KEYIN0, NULL);
gpio_request(GPIO_FN_KEYIN1, NULL);
gpio_request(GPIO_FN_KEYIN2, NULL);
gpio_request(GPIO_FN_KEYIN3, NULL);
gpio_request(GPIO_FN_KEYIN4, NULL);
gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
/* setup LCDC pins for SYS panel */
gpio_request(GPIO_FN_LCDD17, NULL);
gpio_request(GPIO_FN_LCDD16, NULL);
gpio_request(GPIO_FN_LCDD15, NULL);
gpio_request(GPIO_FN_LCDD14, NULL);
gpio_request(GPIO_FN_LCDD13, NULL);
gpio_request(GPIO_FN_LCDD12, NULL);
gpio_request(GPIO_FN_LCDD11, NULL);
gpio_request(GPIO_FN_LCDD10, NULL);
gpio_request(GPIO_FN_LCDD9, NULL);
gpio_request(GPIO_FN_LCDD8, NULL);
gpio_request(GPIO_FN_LCDD7, NULL);
gpio_request(GPIO_FN_LCDD6, NULL);
gpio_request(GPIO_FN_LCDD5, NULL);
gpio_request(GPIO_FN_LCDD4, NULL);
gpio_request(GPIO_FN_LCDD3, NULL);
gpio_request(GPIO_FN_LCDD2, NULL);
gpio_request(GPIO_FN_LCDD1, NULL);
gpio_request(GPIO_FN_LCDD0, NULL);
gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
gpio_direction_output(GPIO_PTE4, 1);
gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
gpio_direction_output(GPIO_PTF4, 1);
gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
gpio_direction_output(GPIO_PTU0, 1);
/* setup USB function */
if (kfr2r09_usb0_gadget_setup() == 0)
platform_device_register(&kfr2r09_usb0_gadget_device);
/* CEU */
gpio_request(GPIO_FN_VIO_CKO, NULL);
gpio_request(GPIO_FN_VIO0_CLK, NULL);
gpio_request(GPIO_FN_VIO0_VD, NULL);
gpio_request(GPIO_FN_VIO0_HD, NULL);
gpio_request(GPIO_FN_VIO0_FLD, NULL);
gpio_request(GPIO_FN_VIO0_D7, NULL);
gpio_request(GPIO_FN_VIO0_D6, NULL);
gpio_request(GPIO_FN_VIO0_D5, NULL);
gpio_request(GPIO_FN_VIO0_D4, NULL);
gpio_request(GPIO_FN_VIO0_D3, NULL);
gpio_request(GPIO_FN_VIO0_D2, NULL);
gpio_request(GPIO_FN_VIO0_D1, NULL);
gpio_request(GPIO_FN_VIO0_D0, NULL);
/* SDHI0 connected to yc304 */
gpio_request(GPIO_FN_SDHI0CD, NULL);
gpio_request(GPIO_FN_SDHI0D3, NULL);
gpio_request(GPIO_FN_SDHI0D2, NULL);
gpio_request(GPIO_FN_SDHI0D1, NULL);
gpio_request(GPIO_FN_SDHI0D0, NULL);
gpio_request(GPIO_FN_SDHI0CMD, NULL);
gpio_request(GPIO_FN_SDHI0CLK, NULL);
i2c_register_board_info(0, &kfr2r09_backlight_board_info, 1);
/* Set camera clock frequency and register and alias for rj54n1. */
camera_clk = clk_get(NULL, "video_clk");
if (!IS_ERR(camera_clk)) {
clk_set_rate(camera_clk,
clk_round_rate(camera_clk, CEU_MCLK_FREQ));
clk_put(camera_clk);
}
clk_add_alias(NULL, "1-0050", "video_clk", NULL);
/* set DRVCRB
*
* use 1.8 V for VccQ_VIO
* use 2.85V for VccQ_SR
*/
__raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
gpiod_add_lookup_table(&rj54n1_gpios);
i2c_register_board_info(1, &kfr2r09_i2c_camera, 1);
/* Initialize CEU platform device separately to map memory first */
device_initialize(&kfr2r09_ceu_device.dev);
dma_declare_coherent_memory(&kfr2r09_ceu_device.dev,
ceu_dma_membase, ceu_dma_membase,
ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1);
platform_device_add(&kfr2r09_ceu_device);
return platform_add_devices(kfr2r09_devices,
ARRAY_SIZE(kfr2r09_devices));
}
device_initcall(kfr2r09_devices_setup);
/* Return the board specific boot mode pin configuration */
static int kfr2r09_mode_pins(void)
{
/* MD0=1, MD1=1, MD2=0: Clock Mode 3
* MD3=0: 16-bit Area0 Bus Width
* MD5=1: Little Endian
* MD8=1: Test Mode Disabled
*/
return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8;
}
/* Reserve a portion of memory for CEU buffers */
static void __init kfr2r09_mv_mem_reserve(void)
{
phys_addr_t phys;
phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
memblock: replace memblock_alloc_base(ANYWHERE) with memblock_phys_alloc The calls to memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ANYWHERE) and memblock_phys_alloc(size, align) are equivalent as both try to allocate 'size' bytes with 'align' alignment anywhere in the memory and panic if hte allocation fails. The conversion is done using the following semantic patch: @@ expression size, align; @@ - memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ANYWHERE) + memblock_phys_alloc(size, align) Link: http://lkml.kernel.org/r/1548057848-15136-4-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 14:29:06 +08:00
phys = memblock_phys_alloc(size, PAGE_SIZE);
memblock: memblock_phys_alloc(): don't panic Make the memblock_phys_alloc() function an inline wrapper for memblock_phys_alloc_range() and update the memblock_phys_alloc() callers to check the returned value and panic in case of error. Link: http://lkml.kernel.org/r/1548057848-15136-8-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 14:29:26 +08:00
if (!phys)
panic("Failed to allocate CEU memory\n");
memblock_free(phys, size);
memblock_remove(phys, size);
ceu_dma_membase = phys;
}
/*
* The Machine Vector
*/
static struct sh_machine_vector mv_kfr2r09 __initmv = {
.mv_name = "kfr2r09",
.mv_mode_pins = kfr2r09_mode_pins,
.mv_mem_reserve = kfr2r09_mv_mem_reserve,
};