linux/arch/mips/sibyte/bcm1480/time.c

122 lines
3.7 KiB
C
Raw Normal View History

/*
* Copyright (C) 2000,2001,2004 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
* These are routines to set up and handle interrupts from the
* bcm1480 general purpose timer 0. We're using the timer as a
* system clock, so we set it up to run at 100 Hz. On every
* interrupt, we update our idea of what the time of day is,
* then call do_timer() in the architecture-independent kernel
* code to do general bookkeeping (e.g. update jiffies, run
* bottom halves, etc.)
*/
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/kernel_stat.h>
#include <asm/irq.h>
#include <asm/addrspace.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/sibyte/bcm1480_regs.h>
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/bcm1480_int.h>
#include <asm/sibyte/bcm1480_scd.h>
#include <asm/sibyte/sb1250.h>
#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
#ifdef CONFIG_SIMULATION
#define BCM1480_HPT_VALUE 50000
#else
#define BCM1480_HPT_VALUE 1000000
#endif
extern int bcm1480_steal_irq(int irq);
void bcm1480_time_init(void)
{
int cpu = smp_processor_id();
int irq = K_BCM1480_INT_TIMER_0+cpu;
/* Only have 4 general purpose timers */
if (cpu > 3) {
BUG();
}
bcm1480_mask_irq(cpu, irq);
/* Map the timer interrupt to ip[4] of this cpu */
__raw_writeq(IMR_IP4_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H)
+ (irq<<3)));
/* the general purpose timer ticks at 1 Mhz independent of the rest of the system */
/* Disable the timer and set up the count */
__raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
__raw_writeq(
BCM1480_HPT_VALUE/HZ
, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
/* Set the timer running */
__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
bcm1480_unmask_irq(cpu, irq);
bcm1480_steal_irq(irq);
/*
* This interrupt is "special" in that it doesn't use the request_irq
* way to hook the irq line. The timer interrupt is initialized early
* enough to make this a major pain, and it's also firing enough to
* warrant a bit of special case code. bcm1480_timer_interrupt is
* called directly from irq_handler.S when IP[4] is set during an
* interrupt
*/
}
void bcm1480_timer_interrupt(void)
{
int cpu = smp_processor_id();
int irq = K_BCM1480_INT_TIMER_0 + cpu;
/* Reset the timer */
__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
ll_timer_interrupt(irq);
}
static cycle_t bcm1480_hpt_read(void)
{
/* We assume this function is called xtime_lock held. */
unsigned long count =
__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
return (jiffies + 1) * (BCM1480_HPT_VALUE / HZ) - count;
}
void __init bcm1480_hpt_setup(void)
{
clocksource_mips.read = bcm1480_hpt_read;
mips_hpt_frequency = BCM1480_HPT_VALUE;
}