linux/drivers/pci/switch/switchtec.c

1549 lines
38 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
/*
* Microsemi Switchtec(tm) PCIe Management Driver
* Copyright (c) 2017, Microsemi Corporation
*/
#include <linux/switchtec.h>
#include <linux/switchtec_ioctl.h>
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/uaccess.h>
#include <linux/poll.h>
#include <linux/wait.h>
#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/nospec.h>
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
MODULE_DESCRIPTION("Microsemi Switchtec(tm) PCIe Management Driver");
MODULE_VERSION("0.1");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Microsemi Corporation");
static int max_devices = 16;
module_param(max_devices, int, 0644);
MODULE_PARM_DESC(max_devices, "max number of switchtec device instances");
static bool use_dma_mrpc = 1;
module_param(use_dma_mrpc, bool, 0644);
MODULE_PARM_DESC(use_dma_mrpc,
"Enable the use of the DMA MRPC feature");
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
static dev_t switchtec_devt;
static DEFINE_IDA(switchtec_minor_ida);
struct class *switchtec_class;
EXPORT_SYMBOL_GPL(switchtec_class);
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
enum mrpc_state {
MRPC_IDLE = 0,
MRPC_QUEUED,
MRPC_RUNNING,
MRPC_DONE,
};
struct switchtec_user {
struct switchtec_dev *stdev;
enum mrpc_state state;
struct completion comp;
struct kref kref;
struct list_head list;
u32 cmd;
u32 status;
u32 return_code;
size_t data_len;
size_t read_len;
unsigned char data[SWITCHTEC_MRPC_PAYLOAD_SIZE];
int event_cnt;
};
static struct switchtec_user *stuser_create(struct switchtec_dev *stdev)
{
struct switchtec_user *stuser;
stuser = kzalloc(sizeof(*stuser), GFP_KERNEL);
if (!stuser)
return ERR_PTR(-ENOMEM);
get_device(&stdev->dev);
stuser->stdev = stdev;
kref_init(&stuser->kref);
INIT_LIST_HEAD(&stuser->list);
init_completion(&stuser->comp);
stuser->event_cnt = atomic_read(&stdev->event_cnt);
dev_dbg(&stdev->dev, "%s: %p\n", __func__, stuser);
return stuser;
}
static void stuser_free(struct kref *kref)
{
struct switchtec_user *stuser;
stuser = container_of(kref, struct switchtec_user, kref);
dev_dbg(&stuser->stdev->dev, "%s: %p\n", __func__, stuser);
put_device(&stuser->stdev->dev);
kfree(stuser);
}
static void stuser_put(struct switchtec_user *stuser)
{
kref_put(&stuser->kref, stuser_free);
}
static void stuser_set_state(struct switchtec_user *stuser,
enum mrpc_state state)
{
/* requires the mrpc_mutex to already be held when called */
const char * const state_names[] = {
[MRPC_IDLE] = "IDLE",
[MRPC_QUEUED] = "QUEUED",
[MRPC_RUNNING] = "RUNNING",
[MRPC_DONE] = "DONE",
};
stuser->state = state;
dev_dbg(&stuser->stdev->dev, "stuser state %p -> %s",
stuser, state_names[state]);
}
static void mrpc_complete_cmd(struct switchtec_dev *stdev);
static void flush_wc_buf(struct switchtec_dev *stdev)
{
struct ntb_dbmsg_regs __iomem *mmio_dbmsg;
/*
* odb (outbound doorbell) register is processed by low latency
* hardware and w/o side effect
*/
mmio_dbmsg = (void __iomem *)stdev->mmio_ntb +
SWITCHTEC_NTB_REG_DBMSG_OFFSET;
ioread32(&mmio_dbmsg->odb);
}
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
static void mrpc_cmd_submit(struct switchtec_dev *stdev)
{
/* requires the mrpc_mutex to already be held when called */
struct switchtec_user *stuser;
if (stdev->mrpc_busy)
return;
if (list_empty(&stdev->mrpc_queue))
return;
stuser = list_entry(stdev->mrpc_queue.next, struct switchtec_user,
list);
if (stdev->dma_mrpc) {
stdev->dma_mrpc->status = SWITCHTEC_MRPC_STATUS_INPROGRESS;
memset(stdev->dma_mrpc->data, 0xFF, SWITCHTEC_MRPC_PAYLOAD_SIZE);
}
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
stuser_set_state(stuser, MRPC_RUNNING);
stdev->mrpc_busy = 1;
memcpy_toio(&stdev->mmio_mrpc->input_data,
stuser->data, stuser->data_len);
flush_wc_buf(stdev);
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
iowrite32(stuser->cmd, &stdev->mmio_mrpc->cmd);
schedule_delayed_work(&stdev->mrpc_timeout,
msecs_to_jiffies(500));
}
static int mrpc_queue_cmd(struct switchtec_user *stuser)
{
/* requires the mrpc_mutex to already be held when called */
struct switchtec_dev *stdev = stuser->stdev;
kref_get(&stuser->kref);
stuser->read_len = sizeof(stuser->data);
stuser_set_state(stuser, MRPC_QUEUED);
init_completion(&stuser->comp);
list_add_tail(&stuser->list, &stdev->mrpc_queue);
mrpc_cmd_submit(stdev);
return 0;
}
static void mrpc_complete_cmd(struct switchtec_dev *stdev)
{
/* requires the mrpc_mutex to already be held when called */
struct switchtec_user *stuser;
if (list_empty(&stdev->mrpc_queue))
return;
stuser = list_entry(stdev->mrpc_queue.next, struct switchtec_user,
list);
if (stdev->dma_mrpc)
stuser->status = stdev->dma_mrpc->status;
else
stuser->status = ioread32(&stdev->mmio_mrpc->status);
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
if (stuser->status == SWITCHTEC_MRPC_STATUS_INPROGRESS)
return;
stuser_set_state(stuser, MRPC_DONE);
stuser->return_code = 0;
if (stuser->status != SWITCHTEC_MRPC_STATUS_DONE)
goto out;
if (stdev->dma_mrpc)
stuser->return_code = stdev->dma_mrpc->rtn_code;
else
stuser->return_code = ioread32(&stdev->mmio_mrpc->ret_value);
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
if (stuser->return_code != 0)
goto out;
if (stdev->dma_mrpc)
memcpy(stuser->data, &stdev->dma_mrpc->data,
stuser->read_len);
else
memcpy_fromio(stuser->data, &stdev->mmio_mrpc->output_data,
stuser->read_len);
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
out:
complete_all(&stuser->comp);
list_del_init(&stuser->list);
stuser_put(stuser);
stdev->mrpc_busy = 0;
mrpc_cmd_submit(stdev);
}
static void mrpc_event_work(struct work_struct *work)
{
struct switchtec_dev *stdev;
stdev = container_of(work, struct switchtec_dev, mrpc_work);
dev_dbg(&stdev->dev, "%s\n", __func__);
mutex_lock(&stdev->mrpc_mutex);
cancel_delayed_work(&stdev->mrpc_timeout);
mrpc_complete_cmd(stdev);
mutex_unlock(&stdev->mrpc_mutex);
}
static void mrpc_timeout_work(struct work_struct *work)
{
struct switchtec_dev *stdev;
u32 status;
stdev = container_of(work, struct switchtec_dev, mrpc_timeout.work);
dev_dbg(&stdev->dev, "%s\n", __func__);
mutex_lock(&stdev->mrpc_mutex);
if (stdev->dma_mrpc)
status = stdev->dma_mrpc->status;
else
status = ioread32(&stdev->mmio_mrpc->status);
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
if (status == SWITCHTEC_MRPC_STATUS_INPROGRESS) {
schedule_delayed_work(&stdev->mrpc_timeout,
msecs_to_jiffies(500));
goto out;
}
mrpc_complete_cmd(stdev);
out:
mutex_unlock(&stdev->mrpc_mutex);
}
static ssize_t device_version_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct switchtec_dev *stdev = to_stdev(dev);
u32 ver;
ver = ioread32(&stdev->mmio_sys_info->device_version);
return sprintf(buf, "%x\n", ver);
}
static DEVICE_ATTR_RO(device_version);
static ssize_t fw_version_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct switchtec_dev *stdev = to_stdev(dev);
u32 ver;
ver = ioread32(&stdev->mmio_sys_info->firmware_version);
return sprintf(buf, "%08x\n", ver);
}
static DEVICE_ATTR_RO(fw_version);
static ssize_t io_string_show(char *buf, void __iomem *attr, size_t len)
{
int i;
memcpy_fromio(buf, attr, len);
buf[len] = '\n';
buf[len + 1] = 0;
for (i = len - 1; i > 0; i--) {
if (buf[i] != ' ')
break;
buf[i] = '\n';
buf[i + 1] = 0;
}
return strlen(buf);
}
#define DEVICE_ATTR_SYS_INFO_STR(field) \
static ssize_t field ## _show(struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
struct switchtec_dev *stdev = to_stdev(dev); \
return io_string_show(buf, &stdev->mmio_sys_info->field, \
sizeof(stdev->mmio_sys_info->field)); \
} \
\
static DEVICE_ATTR_RO(field)
DEVICE_ATTR_SYS_INFO_STR(vendor_id);
DEVICE_ATTR_SYS_INFO_STR(product_id);
DEVICE_ATTR_SYS_INFO_STR(product_revision);
DEVICE_ATTR_SYS_INFO_STR(component_vendor);
static ssize_t component_id_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct switchtec_dev *stdev = to_stdev(dev);
int id = ioread16(&stdev->mmio_sys_info->component_id);
return sprintf(buf, "PM%04X\n", id);
}
static DEVICE_ATTR_RO(component_id);
static ssize_t component_revision_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct switchtec_dev *stdev = to_stdev(dev);
int rev = ioread8(&stdev->mmio_sys_info->component_revision);
return sprintf(buf, "%d\n", rev);
}
static DEVICE_ATTR_RO(component_revision);
static ssize_t partition_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct switchtec_dev *stdev = to_stdev(dev);
return sprintf(buf, "%d\n", stdev->partition);
}
static DEVICE_ATTR_RO(partition);
static ssize_t partition_count_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct switchtec_dev *stdev = to_stdev(dev);
return sprintf(buf, "%d\n", stdev->partition_count);
}
static DEVICE_ATTR_RO(partition_count);
static struct attribute *switchtec_device_attrs[] = {
&dev_attr_device_version.attr,
&dev_attr_fw_version.attr,
&dev_attr_vendor_id.attr,
&dev_attr_product_id.attr,
&dev_attr_product_revision.attr,
&dev_attr_component_vendor.attr,
&dev_attr_component_id.attr,
&dev_attr_component_revision.attr,
&dev_attr_partition.attr,
&dev_attr_partition_count.attr,
NULL,
};
ATTRIBUTE_GROUPS(switchtec_device);
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
static int switchtec_dev_open(struct inode *inode, struct file *filp)
{
struct switchtec_dev *stdev;
struct switchtec_user *stuser;
stdev = container_of(inode->i_cdev, struct switchtec_dev, cdev);
stuser = stuser_create(stdev);
if (IS_ERR(stuser))
return PTR_ERR(stuser);
filp->private_data = stuser;
nonseekable_open(inode, filp);
dev_dbg(&stdev->dev, "%s: %p\n", __func__, stuser);
return 0;
}
static int switchtec_dev_release(struct inode *inode, struct file *filp)
{
struct switchtec_user *stuser = filp->private_data;
stuser_put(stuser);
return 0;
}
static int lock_mutex_and_test_alive(struct switchtec_dev *stdev)
{
if (mutex_lock_interruptible(&stdev->mrpc_mutex))
return -EINTR;
if (!stdev->alive) {
mutex_unlock(&stdev->mrpc_mutex);
return -ENODEV;
}
return 0;
}
static ssize_t switchtec_dev_write(struct file *filp, const char __user *data,
size_t size, loff_t *off)
{
struct switchtec_user *stuser = filp->private_data;
struct switchtec_dev *stdev = stuser->stdev;
int rc;
if (size < sizeof(stuser->cmd) ||
size > sizeof(stuser->cmd) + sizeof(stuser->data))
return -EINVAL;
stuser->data_len = size - sizeof(stuser->cmd);
rc = lock_mutex_and_test_alive(stdev);
if (rc)
return rc;
if (stuser->state != MRPC_IDLE) {
rc = -EBADE;
goto out;
}
rc = copy_from_user(&stuser->cmd, data, sizeof(stuser->cmd));
if (rc) {
rc = -EFAULT;
goto out;
}
data += sizeof(stuser->cmd);
rc = copy_from_user(&stuser->data, data, size - sizeof(stuser->cmd));
if (rc) {
rc = -EFAULT;
goto out;
}
rc = mrpc_queue_cmd(stuser);
out:
mutex_unlock(&stdev->mrpc_mutex);
if (rc)
return rc;
return size;
}
static ssize_t switchtec_dev_read(struct file *filp, char __user *data,
size_t size, loff_t *off)
{
struct switchtec_user *stuser = filp->private_data;
struct switchtec_dev *stdev = stuser->stdev;
int rc;
if (size < sizeof(stuser->cmd) ||
size > sizeof(stuser->cmd) + sizeof(stuser->data))
return -EINVAL;
rc = lock_mutex_and_test_alive(stdev);
if (rc)
return rc;
if (stuser->state == MRPC_IDLE) {
mutex_unlock(&stdev->mrpc_mutex);
return -EBADE;
}
stuser->read_len = size - sizeof(stuser->return_code);
mutex_unlock(&stdev->mrpc_mutex);
if (filp->f_flags & O_NONBLOCK) {
if (!try_wait_for_completion(&stuser->comp))
return -EAGAIN;
} else {
rc = wait_for_completion_interruptible(&stuser->comp);
if (rc < 0)
return rc;
}
rc = lock_mutex_and_test_alive(stdev);
if (rc)
return rc;
if (stuser->state != MRPC_DONE) {
mutex_unlock(&stdev->mrpc_mutex);
return -EBADE;
}
rc = copy_to_user(data, &stuser->return_code,
sizeof(stuser->return_code));
if (rc) {
rc = -EFAULT;
goto out;
}
data += sizeof(stuser->return_code);
rc = copy_to_user(data, &stuser->data,
size - sizeof(stuser->return_code));
if (rc) {
rc = -EFAULT;
goto out;
}
stuser_set_state(stuser, MRPC_IDLE);
out:
mutex_unlock(&stdev->mrpc_mutex);
if (stuser->status == SWITCHTEC_MRPC_STATUS_DONE)
return size;
else if (stuser->status == SWITCHTEC_MRPC_STATUS_INTERRUPTED)
return -ENXIO;
else
return -EBADMSG;
}
static __poll_t switchtec_dev_poll(struct file *filp, poll_table *wait)
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
{
struct switchtec_user *stuser = filp->private_data;
struct switchtec_dev *stdev = stuser->stdev;
__poll_t ret = 0;
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
poll_wait(filp, &stuser->comp.wait, wait);
poll_wait(filp, &stdev->event_wq, wait);
if (lock_mutex_and_test_alive(stdev))
return EPOLLIN | EPOLLRDHUP | EPOLLOUT | EPOLLERR | EPOLLHUP;
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
mutex_unlock(&stdev->mrpc_mutex);
if (try_wait_for_completion(&stuser->comp))
ret |= EPOLLIN | EPOLLRDNORM;
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
if (stuser->event_cnt != atomic_read(&stdev->event_cnt))
ret |= EPOLLPRI | EPOLLRDBAND;
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
return ret;
}
static int ioctl_flash_info(struct switchtec_dev *stdev,
struct switchtec_ioctl_flash_info __user *uinfo)
{
struct switchtec_ioctl_flash_info info = {0};
struct flash_info_regs __iomem *fi = stdev->mmio_flash_info;
info.flash_length = ioread32(&fi->flash_length);
info.num_partitions = SWITCHTEC_IOCTL_NUM_PARTITIONS;
if (copy_to_user(uinfo, &info, sizeof(info)))
return -EFAULT;
return 0;
}
static void set_fw_info_part(struct switchtec_ioctl_flash_part_info *info,
struct partition_info __iomem *pi)
{
info->address = ioread32(&pi->address);
info->length = ioread32(&pi->length);
}
static int ioctl_flash_part_info(struct switchtec_dev *stdev,
struct switchtec_ioctl_flash_part_info __user *uinfo)
{
struct switchtec_ioctl_flash_part_info info = {0};
struct flash_info_regs __iomem *fi = stdev->mmio_flash_info;
struct sys_info_regs __iomem *si = stdev->mmio_sys_info;
u32 active_addr = -1;
if (copy_from_user(&info, uinfo, sizeof(info)))
return -EFAULT;
switch (info.flash_partition) {
case SWITCHTEC_IOCTL_PART_CFG0:
active_addr = ioread32(&fi->active_cfg);
set_fw_info_part(&info, &fi->cfg0);
if (ioread16(&si->cfg_running) == SWITCHTEC_CFG0_RUNNING)
info.active |= SWITCHTEC_IOCTL_PART_RUNNING;
break;
case SWITCHTEC_IOCTL_PART_CFG1:
active_addr = ioread32(&fi->active_cfg);
set_fw_info_part(&info, &fi->cfg1);
if (ioread16(&si->cfg_running) == SWITCHTEC_CFG1_RUNNING)
info.active |= SWITCHTEC_IOCTL_PART_RUNNING;
break;
case SWITCHTEC_IOCTL_PART_IMG0:
active_addr = ioread32(&fi->active_img);
set_fw_info_part(&info, &fi->img0);
if (ioread16(&si->img_running) == SWITCHTEC_IMG0_RUNNING)
info.active |= SWITCHTEC_IOCTL_PART_RUNNING;
break;
case SWITCHTEC_IOCTL_PART_IMG1:
active_addr = ioread32(&fi->active_img);
set_fw_info_part(&info, &fi->img1);
if (ioread16(&si->img_running) == SWITCHTEC_IMG1_RUNNING)
info.active |= SWITCHTEC_IOCTL_PART_RUNNING;
break;
case SWITCHTEC_IOCTL_PART_NVLOG:
set_fw_info_part(&info, &fi->nvlog);
break;
case SWITCHTEC_IOCTL_PART_VENDOR0:
set_fw_info_part(&info, &fi->vendor[0]);
break;
case SWITCHTEC_IOCTL_PART_VENDOR1:
set_fw_info_part(&info, &fi->vendor[1]);
break;
case SWITCHTEC_IOCTL_PART_VENDOR2:
set_fw_info_part(&info, &fi->vendor[2]);
break;
case SWITCHTEC_IOCTL_PART_VENDOR3:
set_fw_info_part(&info, &fi->vendor[3]);
break;
case SWITCHTEC_IOCTL_PART_VENDOR4:
set_fw_info_part(&info, &fi->vendor[4]);
break;
case SWITCHTEC_IOCTL_PART_VENDOR5:
set_fw_info_part(&info, &fi->vendor[5]);
break;
case SWITCHTEC_IOCTL_PART_VENDOR6:
set_fw_info_part(&info, &fi->vendor[6]);
break;
case SWITCHTEC_IOCTL_PART_VENDOR7:
set_fw_info_part(&info, &fi->vendor[7]);
break;
default:
return -EINVAL;
}
if (info.address == active_addr)
info.active |= SWITCHTEC_IOCTL_PART_ACTIVE;
if (copy_to_user(uinfo, &info, sizeof(info)))
return -EFAULT;
return 0;
}
static int ioctl_event_summary(struct switchtec_dev *stdev,
struct switchtec_user *stuser,
struct switchtec_ioctl_event_summary __user *usum)
{
struct switchtec_ioctl_event_summary s = {0};
int i;
u32 reg;
s.global = ioread32(&stdev->mmio_sw_event->global_summary);
s.part_bitmap = ioread32(&stdev->mmio_sw_event->part_event_bitmap);
s.local_part = ioread32(&stdev->mmio_part_cfg->part_event_summary);
for (i = 0; i < stdev->partition_count; i++) {
reg = ioread32(&stdev->mmio_part_cfg_all[i].part_event_summary);
s.part[i] = reg;
}
for (i = 0; i < SWITCHTEC_MAX_PFF_CSR; i++) {
reg = ioread16(&stdev->mmio_pff_csr[i].vendor_id);
if (reg != PCI_VENDOR_ID_MICROSEMI)
break;
reg = ioread32(&stdev->mmio_pff_csr[i].pff_event_summary);
s.pff[i] = reg;
}
if (copy_to_user(usum, &s, sizeof(s)))
return -EFAULT;
stuser->event_cnt = atomic_read(&stdev->event_cnt);
return 0;
}
static u32 __iomem *global_ev_reg(struct switchtec_dev *stdev,
size_t offset, int index)
{
return (void __iomem *)stdev->mmio_sw_event + offset;
}
static u32 __iomem *part_ev_reg(struct switchtec_dev *stdev,
size_t offset, int index)
{
return (void __iomem *)&stdev->mmio_part_cfg_all[index] + offset;
}
static u32 __iomem *pff_ev_reg(struct switchtec_dev *stdev,
size_t offset, int index)
{
return (void __iomem *)&stdev->mmio_pff_csr[index] + offset;
}
#define EV_GLB(i, r)[i] = {offsetof(struct sw_event_regs, r), global_ev_reg}
#define EV_PAR(i, r)[i] = {offsetof(struct part_cfg_regs, r), part_ev_reg}
#define EV_PFF(i, r)[i] = {offsetof(struct pff_csr_regs, r), pff_ev_reg}
static const struct event_reg {
size_t offset;
u32 __iomem *(*map_reg)(struct switchtec_dev *stdev,
size_t offset, int index);
} event_regs[] = {
EV_GLB(SWITCHTEC_IOCTL_EVENT_STACK_ERROR, stack_error_event_hdr),
EV_GLB(SWITCHTEC_IOCTL_EVENT_PPU_ERROR, ppu_error_event_hdr),
EV_GLB(SWITCHTEC_IOCTL_EVENT_ISP_ERROR, isp_error_event_hdr),
EV_GLB(SWITCHTEC_IOCTL_EVENT_SYS_RESET, sys_reset_event_hdr),
EV_GLB(SWITCHTEC_IOCTL_EVENT_FW_EXC, fw_exception_hdr),
EV_GLB(SWITCHTEC_IOCTL_EVENT_FW_NMI, fw_nmi_hdr),
EV_GLB(SWITCHTEC_IOCTL_EVENT_FW_NON_FATAL, fw_non_fatal_hdr),
EV_GLB(SWITCHTEC_IOCTL_EVENT_FW_FATAL, fw_fatal_hdr),
EV_GLB(SWITCHTEC_IOCTL_EVENT_TWI_MRPC_COMP, twi_mrpc_comp_hdr),
EV_GLB(SWITCHTEC_IOCTL_EVENT_TWI_MRPC_COMP_ASYNC,
twi_mrpc_comp_async_hdr),
EV_GLB(SWITCHTEC_IOCTL_EVENT_CLI_MRPC_COMP, cli_mrpc_comp_hdr),
EV_GLB(SWITCHTEC_IOCTL_EVENT_CLI_MRPC_COMP_ASYNC,
cli_mrpc_comp_async_hdr),
EV_GLB(SWITCHTEC_IOCTL_EVENT_GPIO_INT, gpio_interrupt_hdr),
EV_GLB(SWITCHTEC_IOCTL_EVENT_GFMS, gfms_event_hdr),
EV_PAR(SWITCHTEC_IOCTL_EVENT_PART_RESET, part_reset_hdr),
EV_PAR(SWITCHTEC_IOCTL_EVENT_MRPC_COMP, mrpc_comp_hdr),
EV_PAR(SWITCHTEC_IOCTL_EVENT_MRPC_COMP_ASYNC, mrpc_comp_async_hdr),
EV_PAR(SWITCHTEC_IOCTL_EVENT_DYN_PART_BIND_COMP, dyn_binding_hdr),
EV_PFF(SWITCHTEC_IOCTL_EVENT_AER_IN_P2P, aer_in_p2p_hdr),
EV_PFF(SWITCHTEC_IOCTL_EVENT_AER_IN_VEP, aer_in_vep_hdr),
EV_PFF(SWITCHTEC_IOCTL_EVENT_DPC, dpc_hdr),
EV_PFF(SWITCHTEC_IOCTL_EVENT_CTS, cts_hdr),
EV_PFF(SWITCHTEC_IOCTL_EVENT_HOTPLUG, hotplug_hdr),
EV_PFF(SWITCHTEC_IOCTL_EVENT_IER, ier_hdr),
EV_PFF(SWITCHTEC_IOCTL_EVENT_THRESH, threshold_hdr),
EV_PFF(SWITCHTEC_IOCTL_EVENT_POWER_MGMT, power_mgmt_hdr),
EV_PFF(SWITCHTEC_IOCTL_EVENT_TLP_THROTTLING, tlp_throttling_hdr),
EV_PFF(SWITCHTEC_IOCTL_EVENT_FORCE_SPEED, force_speed_hdr),
EV_PFF(SWITCHTEC_IOCTL_EVENT_CREDIT_TIMEOUT, credit_timeout_hdr),
EV_PFF(SWITCHTEC_IOCTL_EVENT_LINK_STATE, link_state_hdr),
};
static u32 __iomem *event_hdr_addr(struct switchtec_dev *stdev,
int event_id, int index)
{
size_t off;
if (event_id < 0 || event_id >= SWITCHTEC_IOCTL_MAX_EVENTS)
return ERR_PTR(-EINVAL);
off = event_regs[event_id].offset;
if (event_regs[event_id].map_reg == part_ev_reg) {
if (index == SWITCHTEC_IOCTL_EVENT_LOCAL_PART_IDX)
index = stdev->partition;
else if (index < 0 || index >= stdev->partition_count)
return ERR_PTR(-EINVAL);
} else if (event_regs[event_id].map_reg == pff_ev_reg) {
if (index < 0 || index >= stdev->pff_csr_count)
return ERR_PTR(-EINVAL);
}
return event_regs[event_id].map_reg(stdev, off, index);
}
static int event_ctl(struct switchtec_dev *stdev,
struct switchtec_ioctl_event_ctl *ctl)
{
int i;
u32 __iomem *reg;
u32 hdr;
reg = event_hdr_addr(stdev, ctl->event_id, ctl->index);
if (IS_ERR(reg))
return PTR_ERR(reg);
hdr = ioread32(reg);
for (i = 0; i < ARRAY_SIZE(ctl->data); i++)
ctl->data[i] = ioread32(&reg[i + 1]);
ctl->occurred = hdr & SWITCHTEC_EVENT_OCCURRED;
ctl->count = (hdr >> 5) & 0xFF;
if (!(ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_CLEAR))
hdr &= ~SWITCHTEC_EVENT_CLEAR;
if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_EN_POLL)
hdr |= SWITCHTEC_EVENT_EN_IRQ;
if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_DIS_POLL)
hdr &= ~SWITCHTEC_EVENT_EN_IRQ;
if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_EN_LOG)
hdr |= SWITCHTEC_EVENT_EN_LOG;
if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_DIS_LOG)
hdr &= ~SWITCHTEC_EVENT_EN_LOG;
if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_EN_CLI)
hdr |= SWITCHTEC_EVENT_EN_CLI;
if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_DIS_CLI)
hdr &= ~SWITCHTEC_EVENT_EN_CLI;
if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_EN_FATAL)
hdr |= SWITCHTEC_EVENT_FATAL;
if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_DIS_FATAL)
hdr &= ~SWITCHTEC_EVENT_FATAL;
if (ctl->flags)
iowrite32(hdr, reg);
ctl->flags = 0;
if (hdr & SWITCHTEC_EVENT_EN_IRQ)
ctl->flags |= SWITCHTEC_IOCTL_EVENT_FLAG_EN_POLL;
if (hdr & SWITCHTEC_EVENT_EN_LOG)
ctl->flags |= SWITCHTEC_IOCTL_EVENT_FLAG_EN_LOG;
if (hdr & SWITCHTEC_EVENT_EN_CLI)
ctl->flags |= SWITCHTEC_IOCTL_EVENT_FLAG_EN_CLI;
if (hdr & SWITCHTEC_EVENT_FATAL)
ctl->flags |= SWITCHTEC_IOCTL_EVENT_FLAG_EN_FATAL;
return 0;
}
static int ioctl_event_ctl(struct switchtec_dev *stdev,
struct switchtec_ioctl_event_ctl __user *uctl)
{
int ret;
int nr_idxs;
unsigned int event_flags;
struct switchtec_ioctl_event_ctl ctl;
if (copy_from_user(&ctl, uctl, sizeof(ctl)))
return -EFAULT;
if (ctl.event_id >= SWITCHTEC_IOCTL_MAX_EVENTS)
return -EINVAL;
if (ctl.flags & SWITCHTEC_IOCTL_EVENT_FLAG_UNUSED)
return -EINVAL;
if (ctl.index == SWITCHTEC_IOCTL_EVENT_IDX_ALL) {
if (event_regs[ctl.event_id].map_reg == global_ev_reg)
nr_idxs = 1;
else if (event_regs[ctl.event_id].map_reg == part_ev_reg)
nr_idxs = stdev->partition_count;
else if (event_regs[ctl.event_id].map_reg == pff_ev_reg)
nr_idxs = stdev->pff_csr_count;
else
return -EINVAL;
event_flags = ctl.flags;
for (ctl.index = 0; ctl.index < nr_idxs; ctl.index++) {
ctl.flags = event_flags;
ret = event_ctl(stdev, &ctl);
if (ret < 0)
return ret;
}
} else {
ret = event_ctl(stdev, &ctl);
if (ret < 0)
return ret;
}
if (copy_to_user(uctl, &ctl, sizeof(ctl)))
return -EFAULT;
return 0;
}
static int ioctl_pff_to_port(struct switchtec_dev *stdev,
struct switchtec_ioctl_pff_port *up)
{
int i, part;
u32 reg;
struct part_cfg_regs *pcfg;
struct switchtec_ioctl_pff_port p;
if (copy_from_user(&p, up, sizeof(p)))
return -EFAULT;
p.port = -1;
for (part = 0; part < stdev->partition_count; part++) {
pcfg = &stdev->mmio_part_cfg_all[part];
p.partition = part;
reg = ioread32(&pcfg->usp_pff_inst_id);
if (reg == p.pff) {
p.port = 0;
break;
}
reg = ioread32(&pcfg->vep_pff_inst_id);
if (reg == p.pff) {
p.port = SWITCHTEC_IOCTL_PFF_VEP;
break;
}
for (i = 0; i < ARRAY_SIZE(pcfg->dsp_pff_inst_id); i++) {
reg = ioread32(&pcfg->dsp_pff_inst_id[i]);
if (reg != p.pff)
continue;
p.port = i + 1;
break;
}
if (p.port != -1)
break;
}
if (copy_to_user(up, &p, sizeof(p)))
return -EFAULT;
return 0;
}
static int ioctl_port_to_pff(struct switchtec_dev *stdev,
struct switchtec_ioctl_pff_port *up)
{
struct switchtec_ioctl_pff_port p;
struct part_cfg_regs *pcfg;
if (copy_from_user(&p, up, sizeof(p)))
return -EFAULT;
if (p.partition == SWITCHTEC_IOCTL_EVENT_LOCAL_PART_IDX)
pcfg = stdev->mmio_part_cfg;
else if (p.partition < stdev->partition_count)
pcfg = &stdev->mmio_part_cfg_all[p.partition];
else
return -EINVAL;
switch (p.port) {
case 0:
p.pff = ioread32(&pcfg->usp_pff_inst_id);
break;
case SWITCHTEC_IOCTL_PFF_VEP:
p.pff = ioread32(&pcfg->vep_pff_inst_id);
break;
default:
if (p.port > ARRAY_SIZE(pcfg->dsp_pff_inst_id))
return -EINVAL;
p.port = array_index_nospec(p.port,
ARRAY_SIZE(pcfg->dsp_pff_inst_id) + 1);
p.pff = ioread32(&pcfg->dsp_pff_inst_id[p.port - 1]);
break;
}
if (copy_to_user(up, &p, sizeof(p)))
return -EFAULT;
return 0;
}
static long switchtec_dev_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg)
{
struct switchtec_user *stuser = filp->private_data;
struct switchtec_dev *stdev = stuser->stdev;
int rc;
void __user *argp = (void __user *)arg;
rc = lock_mutex_and_test_alive(stdev);
if (rc)
return rc;
switch (cmd) {
case SWITCHTEC_IOCTL_FLASH_INFO:
rc = ioctl_flash_info(stdev, argp);
break;
case SWITCHTEC_IOCTL_FLASH_PART_INFO:
rc = ioctl_flash_part_info(stdev, argp);
break;
case SWITCHTEC_IOCTL_EVENT_SUMMARY:
rc = ioctl_event_summary(stdev, stuser, argp);
break;
case SWITCHTEC_IOCTL_EVENT_CTL:
rc = ioctl_event_ctl(stdev, argp);
break;
case SWITCHTEC_IOCTL_PFF_TO_PORT:
rc = ioctl_pff_to_port(stdev, argp);
break;
case SWITCHTEC_IOCTL_PORT_TO_PFF:
rc = ioctl_port_to_pff(stdev, argp);
break;
default:
rc = -ENOTTY;
break;
}
mutex_unlock(&stdev->mrpc_mutex);
return rc;
}
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
static const struct file_operations switchtec_fops = {
.owner = THIS_MODULE,
.open = switchtec_dev_open,
.release = switchtec_dev_release,
.write = switchtec_dev_write,
.read = switchtec_dev_read,
.poll = switchtec_dev_poll,
.unlocked_ioctl = switchtec_dev_ioctl,
.compat_ioctl = switchtec_dev_ioctl,
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
};
static void link_event_work(struct work_struct *work)
{
struct switchtec_dev *stdev;
stdev = container_of(work, struct switchtec_dev, link_event_work);
if (stdev->link_notifier)
stdev->link_notifier(stdev);
}
static void check_link_state_events(struct switchtec_dev *stdev)
{
int idx;
u32 reg;
int count;
int occurred = 0;
for (idx = 0; idx < stdev->pff_csr_count; idx++) {
reg = ioread32(&stdev->mmio_pff_csr[idx].link_state_hdr);
dev_dbg(&stdev->dev, "link_state: %d->%08x\n", idx, reg);
count = (reg >> 5) & 0xFF;
if (count != stdev->link_event_count[idx]) {
occurred = 1;
stdev->link_event_count[idx] = count;
}
}
if (occurred)
schedule_work(&stdev->link_event_work);
}
static void enable_link_state_events(struct switchtec_dev *stdev)
{
int idx;
for (idx = 0; idx < stdev->pff_csr_count; idx++) {
iowrite32(SWITCHTEC_EVENT_CLEAR |
SWITCHTEC_EVENT_EN_IRQ,
&stdev->mmio_pff_csr[idx].link_state_hdr);
}
}
static void enable_dma_mrpc(struct switchtec_dev *stdev)
{
writeq(stdev->dma_mrpc_dma_addr, &stdev->mmio_mrpc->dma_addr);
flush_wc_buf(stdev);
iowrite32(SWITCHTEC_DMA_MRPC_EN, &stdev->mmio_mrpc->dma_en);
}
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
static void stdev_release(struct device *dev)
{
struct switchtec_dev *stdev = to_stdev(dev);
if (stdev->dma_mrpc) {
iowrite32(0, &stdev->mmio_mrpc->dma_en);
flush_wc_buf(stdev);
writeq(0, &stdev->mmio_mrpc->dma_addr);
dma_free_coherent(&stdev->pdev->dev, sizeof(*stdev->dma_mrpc),
stdev->dma_mrpc, stdev->dma_mrpc_dma_addr);
}
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
kfree(stdev);
}
static void stdev_kill(struct switchtec_dev *stdev)
{
struct switchtec_user *stuser, *tmpuser;
pci_clear_master(stdev->pdev);
cancel_delayed_work_sync(&stdev->mrpc_timeout);
/* Mark the hardware as unavailable and complete all completions */
mutex_lock(&stdev->mrpc_mutex);
stdev->alive = false;
/* Wake up and kill any users waiting on an MRPC request */
list_for_each_entry_safe(stuser, tmpuser, &stdev->mrpc_queue, list) {
complete_all(&stuser->comp);
list_del_init(&stuser->list);
stuser_put(stuser);
}
mutex_unlock(&stdev->mrpc_mutex);
/* Wake up any users waiting on event_wq */
wake_up_interruptible(&stdev->event_wq);
}
static struct switchtec_dev *stdev_create(struct pci_dev *pdev)
{
struct switchtec_dev *stdev;
int minor;
struct device *dev;
struct cdev *cdev;
int rc;
stdev = kzalloc_node(sizeof(*stdev), GFP_KERNEL,
dev_to_node(&pdev->dev));
if (!stdev)
return ERR_PTR(-ENOMEM);
stdev->alive = true;
stdev->pdev = pdev;
INIT_LIST_HEAD(&stdev->mrpc_queue);
mutex_init(&stdev->mrpc_mutex);
stdev->mrpc_busy = 0;
INIT_WORK(&stdev->mrpc_work, mrpc_event_work);
INIT_DELAYED_WORK(&stdev->mrpc_timeout, mrpc_timeout_work);
INIT_WORK(&stdev->link_event_work, link_event_work);
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
init_waitqueue_head(&stdev->event_wq);
atomic_set(&stdev->event_cnt, 0);
dev = &stdev->dev;
device_initialize(dev);
dev->class = switchtec_class;
dev->parent = &pdev->dev;
dev->groups = switchtec_device_groups;
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
dev->release = stdev_release;
minor = ida_simple_get(&switchtec_minor_ida, 0, 0,
GFP_KERNEL);
if (minor < 0) {
rc = minor;
goto err_put;
}
dev->devt = MKDEV(MAJOR(switchtec_devt), minor);
dev_set_name(dev, "switchtec%d", minor);
cdev = &stdev->cdev;
cdev_init(cdev, &switchtec_fops);
cdev->owner = THIS_MODULE;
return stdev;
err_put:
put_device(&stdev->dev);
return ERR_PTR(rc);
}
static int mask_event(struct switchtec_dev *stdev, int eid, int idx)
{
size_t off = event_regs[eid].offset;
u32 __iomem *hdr_reg;
u32 hdr;
hdr_reg = event_regs[eid].map_reg(stdev, off, idx);
hdr = ioread32(hdr_reg);
if (!(hdr & SWITCHTEC_EVENT_OCCURRED && hdr & SWITCHTEC_EVENT_EN_IRQ))
return 0;
if (eid == SWITCHTEC_IOCTL_EVENT_LINK_STATE)
return 0;
dev_dbg(&stdev->dev, "%s: %d %d %x\n", __func__, eid, idx, hdr);
hdr &= ~(SWITCHTEC_EVENT_EN_IRQ | SWITCHTEC_EVENT_OCCURRED);
iowrite32(hdr, hdr_reg);
return 1;
}
static int mask_all_events(struct switchtec_dev *stdev, int eid)
{
int idx;
int count = 0;
if (event_regs[eid].map_reg == part_ev_reg) {
for (idx = 0; idx < stdev->partition_count; idx++)
count += mask_event(stdev, eid, idx);
} else if (event_regs[eid].map_reg == pff_ev_reg) {
for (idx = 0; idx < stdev->pff_csr_count; idx++) {
if (!stdev->pff_local[idx])
continue;
count += mask_event(stdev, eid, idx);
}
} else {
count += mask_event(stdev, eid, 0);
}
return count;
}
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
static irqreturn_t switchtec_event_isr(int irq, void *dev)
{
struct switchtec_dev *stdev = dev;
u32 reg;
irqreturn_t ret = IRQ_NONE;
int eid, event_count = 0;
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
reg = ioread32(&stdev->mmio_part_cfg->mrpc_comp_hdr);
if (reg & SWITCHTEC_EVENT_OCCURRED) {
dev_dbg(&stdev->dev, "%s: mrpc comp\n", __func__);
ret = IRQ_HANDLED;
schedule_work(&stdev->mrpc_work);
iowrite32(reg, &stdev->mmio_part_cfg->mrpc_comp_hdr);
}
check_link_state_events(stdev);
for (eid = 0; eid < SWITCHTEC_IOCTL_MAX_EVENTS; eid++)
event_count += mask_all_events(stdev, eid);
if (event_count) {
atomic_inc(&stdev->event_cnt);
wake_up_interruptible(&stdev->event_wq);
dev_dbg(&stdev->dev, "%s: %d events\n", __func__,
event_count);
return IRQ_HANDLED;
}
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
return ret;
}
static irqreturn_t switchtec_dma_mrpc_isr(int irq, void *dev)
{
struct switchtec_dev *stdev = dev;
irqreturn_t ret = IRQ_NONE;
iowrite32(SWITCHTEC_EVENT_CLEAR |
SWITCHTEC_EVENT_EN_IRQ,
&stdev->mmio_part_cfg->mrpc_comp_hdr);
schedule_work(&stdev->mrpc_work);
ret = IRQ_HANDLED;
return ret;
}
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
static int switchtec_init_isr(struct switchtec_dev *stdev)
{
int nvecs;
int event_irq;
int dma_mrpc_irq;
int rc;
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
nvecs = pci_alloc_irq_vectors(stdev->pdev, 1, 4,
PCI_IRQ_MSIX | PCI_IRQ_MSI);
if (nvecs < 0)
return nvecs;
event_irq = ioread32(&stdev->mmio_part_cfg->vep_vector_number);
if (event_irq < 0 || event_irq >= nvecs)
return -EFAULT;
event_irq = pci_irq_vector(stdev->pdev, event_irq);
if (event_irq < 0)
return event_irq;
rc = devm_request_irq(&stdev->pdev->dev, event_irq,
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
switchtec_event_isr, 0,
KBUILD_MODNAME, stdev);
if (rc)
return rc;
if (!stdev->dma_mrpc)
return rc;
dma_mrpc_irq = ioread32(&stdev->mmio_mrpc->dma_vector);
if (dma_mrpc_irq < 0 || dma_mrpc_irq >= nvecs)
return -EFAULT;
dma_mrpc_irq = pci_irq_vector(stdev->pdev, dma_mrpc_irq);
if (dma_mrpc_irq < 0)
return dma_mrpc_irq;
rc = devm_request_irq(&stdev->pdev->dev, dma_mrpc_irq,
switchtec_dma_mrpc_isr, 0,
KBUILD_MODNAME, stdev);
return rc;
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
}
static void init_pff(struct switchtec_dev *stdev)
{
int i;
u32 reg;
struct part_cfg_regs *pcfg = stdev->mmio_part_cfg;
for (i = 0; i < SWITCHTEC_MAX_PFF_CSR; i++) {
reg = ioread16(&stdev->mmio_pff_csr[i].vendor_id);
if (reg != PCI_VENDOR_ID_MICROSEMI)
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
break;
}
stdev->pff_csr_count = i;
reg = ioread32(&pcfg->usp_pff_inst_id);
if (reg < SWITCHTEC_MAX_PFF_CSR)
stdev->pff_local[reg] = 1;
reg = ioread32(&pcfg->vep_pff_inst_id);
if (reg < SWITCHTEC_MAX_PFF_CSR)
stdev->pff_local[reg] = 1;
for (i = 0; i < ARRAY_SIZE(pcfg->dsp_pff_inst_id); i++) {
reg = ioread32(&pcfg->dsp_pff_inst_id[i]);
if (reg < SWITCHTEC_MAX_PFF_CSR)
stdev->pff_local[reg] = 1;
}
}
static int switchtec_init_pci(struct switchtec_dev *stdev,
struct pci_dev *pdev)
{
int rc;
void __iomem *map;
unsigned long res_start, res_len;
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
rc = pcim_enable_device(pdev);
if (rc)
return rc;
rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
if (rc)
return rc;
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
pci_set_master(pdev);
res_start = pci_resource_start(pdev, 0);
res_len = pci_resource_len(pdev, 0);
if (!devm_request_mem_region(&pdev->dev, res_start,
res_len, KBUILD_MODNAME))
return -EBUSY;
stdev->mmio_mrpc = devm_ioremap_wc(&pdev->dev, res_start,
SWITCHTEC_GAS_TOP_CFG_OFFSET);
if (!stdev->mmio_mrpc)
return -ENOMEM;
map = devm_ioremap(&pdev->dev,
res_start + SWITCHTEC_GAS_TOP_CFG_OFFSET,
res_len - SWITCHTEC_GAS_TOP_CFG_OFFSET);
if (!map)
return -ENOMEM;
stdev->mmio = map - SWITCHTEC_GAS_TOP_CFG_OFFSET;
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
stdev->mmio_sw_event = stdev->mmio + SWITCHTEC_GAS_SW_EVENT_OFFSET;
stdev->mmio_sys_info = stdev->mmio + SWITCHTEC_GAS_SYS_INFO_OFFSET;
stdev->mmio_flash_info = stdev->mmio + SWITCHTEC_GAS_FLASH_INFO_OFFSET;
stdev->mmio_ntb = stdev->mmio + SWITCHTEC_GAS_NTB_OFFSET;
stdev->partition = ioread8(&stdev->mmio_sys_info->partition_id);
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
stdev->partition_count = ioread8(&stdev->mmio_ntb->partition_count);
stdev->mmio_part_cfg_all = stdev->mmio + SWITCHTEC_GAS_PART_CFG_OFFSET;
stdev->mmio_part_cfg = &stdev->mmio_part_cfg_all[stdev->partition];
stdev->mmio_pff_csr = stdev->mmio + SWITCHTEC_GAS_PFF_CSR_OFFSET;
if (stdev->partition_count < 1)
stdev->partition_count = 1;
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
init_pff(stdev);
pci_set_drvdata(pdev, stdev);
if (!use_dma_mrpc)
return 0;
if (ioread32(&stdev->mmio_mrpc->dma_ver) == 0)
return 0;
stdev->dma_mrpc = dma_alloc_coherent(&stdev->pdev->dev,
sizeof(*stdev->dma_mrpc),
&stdev->dma_mrpc_dma_addr,
GFP_KERNEL);
if (stdev->dma_mrpc == NULL)
return -ENOMEM;
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
return 0;
}
static int switchtec_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct switchtec_dev *stdev;
int rc;
if (pdev->class == (PCI_CLASS_BRIDGE_OTHER << 8))
request_module_nowait("ntb_hw_switchtec");
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
stdev = stdev_create(pdev);
if (IS_ERR(stdev))
return PTR_ERR(stdev);
rc = switchtec_init_pci(stdev, pdev);
if (rc)
goto err_put;
rc = switchtec_init_isr(stdev);
if (rc) {
dev_err(&stdev->dev, "failed to init isr.\n");
goto err_put;
}
iowrite32(SWITCHTEC_EVENT_CLEAR |
SWITCHTEC_EVENT_EN_IRQ,
&stdev->mmio_part_cfg->mrpc_comp_hdr);
enable_link_state_events(stdev);
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
if (stdev->dma_mrpc)
enable_dma_mrpc(stdev);
rc = cdev_device_add(&stdev->cdev, &stdev->dev);
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
if (rc)
goto err_devadd;
dev_info(&stdev->dev, "Management device registered.\n");
return 0;
err_devadd:
stdev_kill(stdev);
err_put:
ida_simple_remove(&switchtec_minor_ida, MINOR(stdev->dev.devt));
put_device(&stdev->dev);
return rc;
}
static void switchtec_pci_remove(struct pci_dev *pdev)
{
struct switchtec_dev *stdev = pci_get_drvdata(pdev);
pci_set_drvdata(pdev, NULL);
cdev_device_del(&stdev->cdev, &stdev->dev);
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
ida_simple_remove(&switchtec_minor_ida, MINOR(stdev->dev.devt));
dev_info(&stdev->dev, "unregistered.\n");
stdev_kill(stdev);
put_device(&stdev->dev);
}
#define SWITCHTEC_PCI_DEVICE(device_id) \
{ \
.vendor = PCI_VENDOR_ID_MICROSEMI, \
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
.device = device_id, \
.subvendor = PCI_ANY_ID, \
.subdevice = PCI_ANY_ID, \
.class = (PCI_CLASS_MEMORY_OTHER << 8), \
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
.class_mask = 0xFFFFFFFF, \
}, \
{ \
.vendor = PCI_VENDOR_ID_MICROSEMI, \
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
.device = device_id, \
.subvendor = PCI_ANY_ID, \
.subdevice = PCI_ANY_ID, \
.class = (PCI_CLASS_BRIDGE_OTHER << 8), \
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
.class_mask = 0xFFFFFFFF, \
}
static const struct pci_device_id switchtec_pci_tbl[] = {
SWITCHTEC_PCI_DEVICE(0x8531), //PFX 24xG3
SWITCHTEC_PCI_DEVICE(0x8532), //PFX 32xG3
SWITCHTEC_PCI_DEVICE(0x8533), //PFX 48xG3
SWITCHTEC_PCI_DEVICE(0x8534), //PFX 64xG3
SWITCHTEC_PCI_DEVICE(0x8535), //PFX 80xG3
SWITCHTEC_PCI_DEVICE(0x8536), //PFX 96xG3
SWITCHTEC_PCI_DEVICE(0x8541), //PSX 24xG3
SWITCHTEC_PCI_DEVICE(0x8542), //PSX 32xG3
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
SWITCHTEC_PCI_DEVICE(0x8543), //PSX 48xG3
SWITCHTEC_PCI_DEVICE(0x8544), //PSX 64xG3
SWITCHTEC_PCI_DEVICE(0x8545), //PSX 80xG3
SWITCHTEC_PCI_DEVICE(0x8546), //PSX 96xG3
SWITCHTEC_PCI_DEVICE(0x8551), //PAX 24XG3
SWITCHTEC_PCI_DEVICE(0x8552), //PAX 32XG3
SWITCHTEC_PCI_DEVICE(0x8553), //PAX 48XG3
SWITCHTEC_PCI_DEVICE(0x8554), //PAX 64XG3
SWITCHTEC_PCI_DEVICE(0x8555), //PAX 80XG3
SWITCHTEC_PCI_DEVICE(0x8556), //PAX 96XG3
SWITCHTEC_PCI_DEVICE(0x8561), //PFXL 24XG3
SWITCHTEC_PCI_DEVICE(0x8562), //PFXL 32XG3
SWITCHTEC_PCI_DEVICE(0x8563), //PFXL 48XG3
SWITCHTEC_PCI_DEVICE(0x8564), //PFXL 64XG3
SWITCHTEC_PCI_DEVICE(0x8565), //PFXL 80XG3
SWITCHTEC_PCI_DEVICE(0x8566), //PFXL 96XG3
SWITCHTEC_PCI_DEVICE(0x8571), //PFXI 24XG3
SWITCHTEC_PCI_DEVICE(0x8572), //PFXI 32XG3
SWITCHTEC_PCI_DEVICE(0x8573), //PFXI 48XG3
SWITCHTEC_PCI_DEVICE(0x8574), //PFXI 64XG3
SWITCHTEC_PCI_DEVICE(0x8575), //PFXI 80XG3
SWITCHTEC_PCI_DEVICE(0x8576), //PFXI 96XG3
MicroSemi Switchtec management interface driver Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes: * Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls. A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future. [1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli [Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 08:30:54 +08:00
{0}
};
MODULE_DEVICE_TABLE(pci, switchtec_pci_tbl);
static struct pci_driver switchtec_pci_driver = {
.name = KBUILD_MODNAME,
.id_table = switchtec_pci_tbl,
.probe = switchtec_pci_probe,
.remove = switchtec_pci_remove,
};
static int __init switchtec_init(void)
{
int rc;
rc = alloc_chrdev_region(&switchtec_devt, 0, max_devices,
"switchtec");
if (rc)
return rc;
switchtec_class = class_create(THIS_MODULE, "switchtec");
if (IS_ERR(switchtec_class)) {
rc = PTR_ERR(switchtec_class);
goto err_create_class;
}
rc = pci_register_driver(&switchtec_pci_driver);
if (rc)
goto err_pci_register;
pr_info(KBUILD_MODNAME ": loaded.\n");
return 0;
err_pci_register:
class_destroy(switchtec_class);
err_create_class:
unregister_chrdev_region(switchtec_devt, max_devices);
return rc;
}
module_init(switchtec_init);
static void __exit switchtec_exit(void)
{
pci_unregister_driver(&switchtec_pci_driver);
class_destroy(switchtec_class);
unregister_chrdev_region(switchtec_devt, max_devices);
ida_destroy(&switchtec_minor_ida);
pr_info(KBUILD_MODNAME ": unloaded.\n");
}
module_exit(switchtec_exit);