linux/drivers/clk/qcom/clk-pll.c

345 lines
8.0 KiB
C
Raw Normal View History

/*
* Copyright (c) 2013, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/bug.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/clk-provider.h>
#include <linux/regmap.h>
#include <asm/div64.h>
#include "clk-pll.h"
#include "common.h"
#define PLL_OUTCTRL BIT(0)
#define PLL_BYPASSNL BIT(1)
#define PLL_RESET_N BIT(2)
static int clk_pll_enable(struct clk_hw *hw)
{
struct clk_pll *pll = to_clk_pll(hw);
int ret;
u32 mask, val;
mask = PLL_OUTCTRL | PLL_RESET_N | PLL_BYPASSNL;
ret = regmap_read(pll->clkr.regmap, pll->mode_reg, &val);
if (ret)
return ret;
/* Skip if already enabled or in FSM mode */
if ((val & mask) == mask || val & PLL_VOTE_FSM_ENA)
return 0;
/* Disable PLL bypass mode. */
ret = regmap_update_bits(pll->clkr.regmap, pll->mode_reg, PLL_BYPASSNL,
PLL_BYPASSNL);
if (ret)
return ret;
/*
* H/W requires a 5us delay between disabling the bypass and
* de-asserting the reset. Delay 10us just to be safe.
*/
udelay(10);
/* De-assert active-low PLL reset. */
ret = regmap_update_bits(pll->clkr.regmap, pll->mode_reg, PLL_RESET_N,
PLL_RESET_N);
if (ret)
return ret;
/* Wait until PLL is locked. */
udelay(50);
/* Enable PLL output. */
return regmap_update_bits(pll->clkr.regmap, pll->mode_reg, PLL_OUTCTRL,
PLL_OUTCTRL);
}
static void clk_pll_disable(struct clk_hw *hw)
{
struct clk_pll *pll = to_clk_pll(hw);
u32 mask;
u32 val;
regmap_read(pll->clkr.regmap, pll->mode_reg, &val);
/* Skip if in FSM mode */
if (val & PLL_VOTE_FSM_ENA)
return;
mask = PLL_OUTCTRL | PLL_RESET_N | PLL_BYPASSNL;
regmap_update_bits(pll->clkr.regmap, pll->mode_reg, mask, 0);
}
static unsigned long
clk_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
{
struct clk_pll *pll = to_clk_pll(hw);
u32 l, m, n, config;
unsigned long rate;
u64 tmp;
regmap_read(pll->clkr.regmap, pll->l_reg, &l);
regmap_read(pll->clkr.regmap, pll->m_reg, &m);
regmap_read(pll->clkr.regmap, pll->n_reg, &n);
l &= 0x3ff;
m &= 0x7ffff;
n &= 0x7ffff;
rate = parent_rate * l;
if (n) {
tmp = parent_rate;
tmp *= m;
do_div(tmp, n);
rate += tmp;
}
if (pll->post_div_width) {
regmap_read(pll->clkr.regmap, pll->config_reg, &config);
config >>= pll->post_div_shift;
config &= BIT(pll->post_div_width) - 1;
rate /= config + 1;
}
return rate;
}
static const
struct pll_freq_tbl *find_freq(const struct pll_freq_tbl *f, unsigned long rate)
{
if (!f)
return NULL;
for (; f->freq; f++)
if (rate <= f->freq)
return f;
return NULL;
}
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 02:48:08 +08:00
static int
clk_pll_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
{
struct clk_pll *pll = to_clk_pll(hw);
const struct pll_freq_tbl *f;
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 02:48:08 +08:00
f = find_freq(pll->freq_tbl, req->rate);
if (!f)
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 02:48:08 +08:00
req->rate = clk_pll_recalc_rate(hw, req->best_parent_rate);
else
req->rate = f->freq;
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-08 02:48:08 +08:00
return 0;
}
static int
clk_pll_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long p_rate)
{
struct clk_pll *pll = to_clk_pll(hw);
const struct pll_freq_tbl *f;
bool enabled;
u32 mode;
u32 enable_mask = PLL_OUTCTRL | PLL_BYPASSNL | PLL_RESET_N;
f = find_freq(pll->freq_tbl, rate);
if (!f)
return -EINVAL;
regmap_read(pll->clkr.regmap, pll->mode_reg, &mode);
enabled = (mode & enable_mask) == enable_mask;
if (enabled)
clk_pll_disable(hw);
regmap_update_bits(pll->clkr.regmap, pll->l_reg, 0x3ff, f->l);
regmap_update_bits(pll->clkr.regmap, pll->m_reg, 0x7ffff, f->m);
regmap_update_bits(pll->clkr.regmap, pll->n_reg, 0x7ffff, f->n);
regmap_write(pll->clkr.regmap, pll->config_reg, f->ibits);
if (enabled)
clk_pll_enable(hw);
return 0;
}
const struct clk_ops clk_pll_ops = {
.enable = clk_pll_enable,
.disable = clk_pll_disable,
.recalc_rate = clk_pll_recalc_rate,
.determine_rate = clk_pll_determine_rate,
.set_rate = clk_pll_set_rate,
};
EXPORT_SYMBOL_GPL(clk_pll_ops);
static int wait_for_pll(struct clk_pll *pll)
{
u32 val;
int count;
int ret;
const char *name = clk_hw_get_name(&pll->clkr.hw);
/* Wait for pll to enable. */
for (count = 200; count > 0; count--) {
ret = regmap_read(pll->clkr.regmap, pll->status_reg, &val);
if (ret)
return ret;
if (val & BIT(pll->status_bit))
return 0;
udelay(1);
}
WARN(1, "%s didn't enable after voting for it!\n", name);
return -ETIMEDOUT;
}
static int clk_pll_vote_enable(struct clk_hw *hw)
{
int ret;
struct clk_pll *p = to_clk_pll(clk_hw_get_parent(hw));
ret = clk_enable_regmap(hw);
if (ret)
return ret;
return wait_for_pll(p);
}
const struct clk_ops clk_pll_vote_ops = {
.enable = clk_pll_vote_enable,
.disable = clk_disable_regmap,
};
EXPORT_SYMBOL_GPL(clk_pll_vote_ops);
static void clk_pll_configure(struct clk_pll *pll, struct regmap *regmap,
const struct pll_config *config)
{
u32 val;
u32 mask;
regmap_write(regmap, pll->l_reg, config->l);
regmap_write(regmap, pll->m_reg, config->m);
regmap_write(regmap, pll->n_reg, config->n);
val = config->vco_val;
val |= config->pre_div_val;
val |= config->post_div_val;
val |= config->mn_ena_mask;
val |= config->main_output_mask;
val |= config->aux_output_mask;
mask = config->vco_mask;
mask |= config->pre_div_mask;
mask |= config->post_div_mask;
mask |= config->mn_ena_mask;
mask |= config->main_output_mask;
mask |= config->aux_output_mask;
regmap_update_bits(regmap, pll->config_reg, mask, val);
}
void clk_pll_configure_sr(struct clk_pll *pll, struct regmap *regmap,
const struct pll_config *config, bool fsm_mode)
{
clk_pll_configure(pll, regmap, config);
if (fsm_mode)
qcom_pll_set_fsm_mode(regmap, pll->mode_reg, 1, 8);
}
EXPORT_SYMBOL_GPL(clk_pll_configure_sr);
void clk_pll_configure_sr_hpm_lp(struct clk_pll *pll, struct regmap *regmap,
const struct pll_config *config, bool fsm_mode)
{
clk_pll_configure(pll, regmap, config);
if (fsm_mode)
qcom_pll_set_fsm_mode(regmap, pll->mode_reg, 1, 0);
}
EXPORT_SYMBOL_GPL(clk_pll_configure_sr_hpm_lp);
static int clk_pll_sr2_enable(struct clk_hw *hw)
{
struct clk_pll *pll = to_clk_pll(hw);
int ret;
u32 mode;
ret = regmap_read(pll->clkr.regmap, pll->mode_reg, &mode);
if (ret)
return ret;
/* Disable PLL bypass mode. */
ret = regmap_update_bits(pll->clkr.regmap, pll->mode_reg, PLL_BYPASSNL,
PLL_BYPASSNL);
if (ret)
return ret;
/*
* H/W requires a 5us delay between disabling the bypass and
* de-asserting the reset. Delay 10us just to be safe.
*/
udelay(10);
/* De-assert active-low PLL reset. */
ret = regmap_update_bits(pll->clkr.regmap, pll->mode_reg, PLL_RESET_N,
PLL_RESET_N);
if (ret)
return ret;
ret = wait_for_pll(pll);
if (ret)
return ret;
/* Enable PLL output. */
return regmap_update_bits(pll->clkr.regmap, pll->mode_reg, PLL_OUTCTRL,
PLL_OUTCTRL);
}
static int
clk_pll_sr2_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long prate)
{
struct clk_pll *pll = to_clk_pll(hw);
const struct pll_freq_tbl *f;
bool enabled;
u32 mode;
u32 enable_mask = PLL_OUTCTRL | PLL_BYPASSNL | PLL_RESET_N;
f = find_freq(pll->freq_tbl, rate);
if (!f)
return -EINVAL;
regmap_read(pll->clkr.regmap, pll->mode_reg, &mode);
enabled = (mode & enable_mask) == enable_mask;
if (enabled)
clk_pll_disable(hw);
regmap_update_bits(pll->clkr.regmap, pll->l_reg, 0x3ff, f->l);
regmap_update_bits(pll->clkr.regmap, pll->m_reg, 0x7ffff, f->m);
regmap_update_bits(pll->clkr.regmap, pll->n_reg, 0x7ffff, f->n);
if (enabled)
clk_pll_sr2_enable(hw);
return 0;
}
const struct clk_ops clk_pll_sr2_ops = {
.enable = clk_pll_sr2_enable,
.disable = clk_pll_disable,
.set_rate = clk_pll_sr2_set_rate,
.recalc_rate = clk_pll_recalc_rate,
.determine_rate = clk_pll_determine_rate,
};
EXPORT_SYMBOL_GPL(clk_pll_sr2_ops);