2018-01-27 02:50:27 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2016-02-17 05:56:23 +08:00
|
|
|
/*
|
|
|
|
* Copyright (c) Microsoft Corporation.
|
|
|
|
*
|
|
|
|
* Author:
|
|
|
|
* Jake Oshins <jakeo@microsoft.com>
|
|
|
|
*
|
|
|
|
* This driver acts as a paravirtual front-end for PCI Express root buses.
|
|
|
|
* When a PCI Express function (either an entire device or an SR-IOV
|
|
|
|
* Virtual Function) is being passed through to the VM, this driver exposes
|
|
|
|
* a new bus to the guest VM. This is modeled as a root PCI bus because
|
|
|
|
* no bridges are being exposed to the VM. In fact, with a "Generation 2"
|
|
|
|
* VM within Hyper-V, there may seem to be no PCI bus at all in the VM
|
|
|
|
* until a device as been exposed using this driver.
|
|
|
|
*
|
|
|
|
* Each root PCI bus has its own PCI domain, which is called "Segment" in
|
|
|
|
* the PCI Firmware Specifications. Thus while each device passed through
|
|
|
|
* to the VM using this front-end will appear at "device 0", the domain will
|
|
|
|
* be unique. Typically, each bus will have one PCI function on it, though
|
|
|
|
* this driver does support more than one.
|
|
|
|
*
|
|
|
|
* In order to map the interrupts from the device through to the guest VM,
|
|
|
|
* this driver also implements an IRQ Domain, which handles interrupts (either
|
|
|
|
* MSI or MSI-X) associated with the functions on the bus. As interrupts are
|
|
|
|
* set up, torn down, or reaffined, this driver communicates with the
|
|
|
|
* underlying hypervisor to adjust the mappings in the I/O MMU so that each
|
|
|
|
* interrupt will be delivered to the correct virtual processor at the right
|
|
|
|
* vector. This driver does not support level-triggered (line-based)
|
|
|
|
* interrupts, and will report that the Interrupt Line register in the
|
|
|
|
* function's configuration space is zero.
|
|
|
|
*
|
|
|
|
* The rest of this driver mostly maps PCI concepts onto underlying Hyper-V
|
|
|
|
* facilities. For instance, the configuration space of a function exposed
|
|
|
|
* by Hyper-V is mapped into a single page of memory space, and the
|
|
|
|
* read and write handlers for config space must be aware of this mechanism.
|
|
|
|
* Similarly, device setup and teardown involves messages sent to and from
|
|
|
|
* the PCI back-end driver in Hyper-V.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/pci.h>
|
2017-08-01 07:48:29 +08:00
|
|
|
#include <linux/delay.h>
|
2016-02-17 05:56:23 +08:00
|
|
|
#include <linux/semaphore.h>
|
|
|
|
#include <linux/irqdomain.h>
|
|
|
|
#include <asm/irqdomain.h>
|
|
|
|
#include <asm/apic.h>
|
2018-07-29 18:15:33 +08:00
|
|
|
#include <linux/irq.h>
|
2016-02-17 05:56:23 +08:00
|
|
|
#include <linux/msi.h>
|
|
|
|
#include <linux/hyperv.h>
|
2017-04-18 22:02:48 +08:00
|
|
|
#include <linux/refcount.h>
|
2016-02-17 05:56:23 +08:00
|
|
|
#include <asm/mshyperv.h>
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Protocol versions. The low word is the minor version, the high word the
|
|
|
|
* major version.
|
|
|
|
*/
|
|
|
|
|
2017-05-25 04:41:27 +08:00
|
|
|
#define PCI_MAKE_VERSION(major, minor) ((u32)(((major) << 16) | (minor)))
|
2016-02-17 05:56:23 +08:00
|
|
|
#define PCI_MAJOR_VERSION(version) ((u32)(version) >> 16)
|
|
|
|
#define PCI_MINOR_VERSION(version) ((u32)(version) & 0xff)
|
|
|
|
|
2017-05-25 04:41:27 +08:00
|
|
|
enum pci_protocol_version_t {
|
|
|
|
PCI_PROTOCOL_VERSION_1_1 = PCI_MAKE_VERSION(1, 1), /* Win10 */
|
2017-05-25 04:41:28 +08:00
|
|
|
PCI_PROTOCOL_VERSION_1_2 = PCI_MAKE_VERSION(1, 2), /* RS1 */
|
2016-02-17 05:56:23 +08:00
|
|
|
};
|
|
|
|
|
2017-03-25 02:07:21 +08:00
|
|
|
#define CPU_AFFINITY_ALL -1ULL
|
2017-05-25 04:41:27 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Supported protocol versions in the order of probing - highest go
|
|
|
|
* first.
|
|
|
|
*/
|
|
|
|
static enum pci_protocol_version_t pci_protocol_versions[] = {
|
2017-05-25 04:41:28 +08:00
|
|
|
PCI_PROTOCOL_VERSION_1_2,
|
2017-05-25 04:41:27 +08:00
|
|
|
PCI_PROTOCOL_VERSION_1_1,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Protocol version negotiated by hv_pci_protocol_negotiation().
|
|
|
|
*/
|
|
|
|
static enum pci_protocol_version_t pci_protocol_version;
|
|
|
|
|
2016-02-17 05:56:23 +08:00
|
|
|
#define PCI_CONFIG_MMIO_LENGTH 0x2000
|
|
|
|
#define CFG_PAGE_OFFSET 0x1000
|
|
|
|
#define CFG_PAGE_SIZE (PCI_CONFIG_MMIO_LENGTH - CFG_PAGE_OFFSET)
|
|
|
|
|
|
|
|
#define MAX_SUPPORTED_MSI_MESSAGES 0x400
|
|
|
|
|
2017-05-25 04:41:27 +08:00
|
|
|
#define STATUS_REVISION_MISMATCH 0xC0000059
|
|
|
|
|
2018-09-15 03:54:56 +08:00
|
|
|
/* space for 32bit serial number as string */
|
|
|
|
#define SLOT_NAME_SIZE 11
|
|
|
|
|
2016-02-17 05:56:23 +08:00
|
|
|
/*
|
|
|
|
* Message Types
|
|
|
|
*/
|
|
|
|
|
|
|
|
enum pci_message_type {
|
|
|
|
/*
|
|
|
|
* Version 1.1
|
|
|
|
*/
|
|
|
|
PCI_MESSAGE_BASE = 0x42490000,
|
|
|
|
PCI_BUS_RELATIONS = PCI_MESSAGE_BASE + 0,
|
|
|
|
PCI_QUERY_BUS_RELATIONS = PCI_MESSAGE_BASE + 1,
|
|
|
|
PCI_POWER_STATE_CHANGE = PCI_MESSAGE_BASE + 4,
|
|
|
|
PCI_QUERY_RESOURCE_REQUIREMENTS = PCI_MESSAGE_BASE + 5,
|
|
|
|
PCI_QUERY_RESOURCE_RESOURCES = PCI_MESSAGE_BASE + 6,
|
|
|
|
PCI_BUS_D0ENTRY = PCI_MESSAGE_BASE + 7,
|
|
|
|
PCI_BUS_D0EXIT = PCI_MESSAGE_BASE + 8,
|
|
|
|
PCI_READ_BLOCK = PCI_MESSAGE_BASE + 9,
|
|
|
|
PCI_WRITE_BLOCK = PCI_MESSAGE_BASE + 0xA,
|
|
|
|
PCI_EJECT = PCI_MESSAGE_BASE + 0xB,
|
|
|
|
PCI_QUERY_STOP = PCI_MESSAGE_BASE + 0xC,
|
|
|
|
PCI_REENABLE = PCI_MESSAGE_BASE + 0xD,
|
|
|
|
PCI_QUERY_STOP_FAILED = PCI_MESSAGE_BASE + 0xE,
|
|
|
|
PCI_EJECTION_COMPLETE = PCI_MESSAGE_BASE + 0xF,
|
|
|
|
PCI_RESOURCES_ASSIGNED = PCI_MESSAGE_BASE + 0x10,
|
|
|
|
PCI_RESOURCES_RELEASED = PCI_MESSAGE_BASE + 0x11,
|
|
|
|
PCI_INVALIDATE_BLOCK = PCI_MESSAGE_BASE + 0x12,
|
|
|
|
PCI_QUERY_PROTOCOL_VERSION = PCI_MESSAGE_BASE + 0x13,
|
|
|
|
PCI_CREATE_INTERRUPT_MESSAGE = PCI_MESSAGE_BASE + 0x14,
|
|
|
|
PCI_DELETE_INTERRUPT_MESSAGE = PCI_MESSAGE_BASE + 0x15,
|
2017-05-25 04:41:28 +08:00
|
|
|
PCI_RESOURCES_ASSIGNED2 = PCI_MESSAGE_BASE + 0x16,
|
|
|
|
PCI_CREATE_INTERRUPT_MESSAGE2 = PCI_MESSAGE_BASE + 0x17,
|
|
|
|
PCI_DELETE_INTERRUPT_MESSAGE2 = PCI_MESSAGE_BASE + 0x18, /* unused */
|
2016-02-17 05:56:23 +08:00
|
|
|
PCI_MESSAGE_MAXIMUM
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Structures defining the virtual PCI Express protocol.
|
|
|
|
*/
|
|
|
|
|
|
|
|
union pci_version {
|
|
|
|
struct {
|
|
|
|
u16 minor_version;
|
|
|
|
u16 major_version;
|
|
|
|
} parts;
|
|
|
|
u32 version;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Function numbers are 8-bits wide on Express, as interpreted through ARI,
|
|
|
|
* which is all this driver does. This representation is the one used in
|
|
|
|
* Windows, which is what is expected when sending this back and forth with
|
|
|
|
* the Hyper-V parent partition.
|
|
|
|
*/
|
|
|
|
union win_slot_encoding {
|
|
|
|
struct {
|
2017-02-11 05:18:46 +08:00
|
|
|
u32 dev:5;
|
|
|
|
u32 func:3;
|
2016-02-17 05:56:23 +08:00
|
|
|
u32 reserved:24;
|
|
|
|
} bits;
|
|
|
|
u32 slot;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Pretty much as defined in the PCI Specifications.
|
|
|
|
*/
|
|
|
|
struct pci_function_description {
|
|
|
|
u16 v_id; /* vendor ID */
|
|
|
|
u16 d_id; /* device ID */
|
|
|
|
u8 rev;
|
|
|
|
u8 prog_intf;
|
|
|
|
u8 subclass;
|
|
|
|
u8 base_class;
|
|
|
|
u32 subsystem_id;
|
|
|
|
union win_slot_encoding win_slot;
|
|
|
|
u32 ser; /* serial number */
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct hv_msi_desc
|
|
|
|
* @vector: IDT entry
|
|
|
|
* @delivery_mode: As defined in Intel's Programmer's
|
|
|
|
* Reference Manual, Volume 3, Chapter 8.
|
|
|
|
* @vector_count: Number of contiguous entries in the
|
|
|
|
* Interrupt Descriptor Table that are
|
|
|
|
* occupied by this Message-Signaled
|
|
|
|
* Interrupt. For "MSI", as first defined
|
|
|
|
* in PCI 2.2, this can be between 1 and
|
|
|
|
* 32. For "MSI-X," as first defined in PCI
|
|
|
|
* 3.0, this must be 1, as each MSI-X table
|
|
|
|
* entry would have its own descriptor.
|
|
|
|
* @reserved: Empty space
|
|
|
|
* @cpu_mask: All the target virtual processors.
|
|
|
|
*/
|
|
|
|
struct hv_msi_desc {
|
|
|
|
u8 vector;
|
|
|
|
u8 delivery_mode;
|
|
|
|
u16 vector_count;
|
|
|
|
u32 reserved;
|
|
|
|
u64 cpu_mask;
|
|
|
|
} __packed;
|
|
|
|
|
2017-05-25 04:41:28 +08:00
|
|
|
/**
|
|
|
|
* struct hv_msi_desc2 - 1.2 version of hv_msi_desc
|
|
|
|
* @vector: IDT entry
|
|
|
|
* @delivery_mode: As defined in Intel's Programmer's
|
|
|
|
* Reference Manual, Volume 3, Chapter 8.
|
|
|
|
* @vector_count: Number of contiguous entries in the
|
|
|
|
* Interrupt Descriptor Table that are
|
|
|
|
* occupied by this Message-Signaled
|
|
|
|
* Interrupt. For "MSI", as first defined
|
|
|
|
* in PCI 2.2, this can be between 1 and
|
|
|
|
* 32. For "MSI-X," as first defined in PCI
|
|
|
|
* 3.0, this must be 1, as each MSI-X table
|
|
|
|
* entry would have its own descriptor.
|
|
|
|
* @processor_count: number of bits enabled in array.
|
|
|
|
* @processor_array: All the target virtual processors.
|
|
|
|
*/
|
|
|
|
struct hv_msi_desc2 {
|
|
|
|
u8 vector;
|
|
|
|
u8 delivery_mode;
|
|
|
|
u16 vector_count;
|
|
|
|
u16 processor_count;
|
|
|
|
u16 processor_array[32];
|
|
|
|
} __packed;
|
|
|
|
|
2016-02-17 05:56:23 +08:00
|
|
|
/**
|
|
|
|
* struct tran_int_desc
|
|
|
|
* @reserved: unused, padding
|
|
|
|
* @vector_count: same as in hv_msi_desc
|
|
|
|
* @data: This is the "data payload" value that is
|
|
|
|
* written by the device when it generates
|
|
|
|
* a message-signaled interrupt, either MSI
|
|
|
|
* or MSI-X.
|
|
|
|
* @address: This is the address to which the data
|
|
|
|
* payload is written on interrupt
|
|
|
|
* generation.
|
|
|
|
*/
|
|
|
|
struct tran_int_desc {
|
|
|
|
u16 reserved;
|
|
|
|
u16 vector_count;
|
|
|
|
u32 data;
|
|
|
|
u64 address;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* A generic message format for virtual PCI.
|
|
|
|
* Specific message formats are defined later in the file.
|
|
|
|
*/
|
|
|
|
|
|
|
|
struct pci_message {
|
2016-08-23 12:45:51 +08:00
|
|
|
u32 type;
|
2016-02-17 05:56:23 +08:00
|
|
|
} __packed;
|
|
|
|
|
|
|
|
struct pci_child_message {
|
2016-08-23 12:45:51 +08:00
|
|
|
struct pci_message message_type;
|
2016-02-17 05:56:23 +08:00
|
|
|
union win_slot_encoding wslot;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
struct pci_incoming_message {
|
|
|
|
struct vmpacket_descriptor hdr;
|
|
|
|
struct pci_message message_type;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
struct pci_response {
|
|
|
|
struct vmpacket_descriptor hdr;
|
|
|
|
s32 status; /* negative values are failures */
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
struct pci_packet {
|
|
|
|
void (*completion_func)(void *context, struct pci_response *resp,
|
|
|
|
int resp_packet_size);
|
|
|
|
void *compl_ctxt;
|
2016-08-23 12:45:51 +08:00
|
|
|
|
|
|
|
struct pci_message message[0];
|
2016-02-17 05:56:23 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Specific message types supporting the PCI protocol.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Version negotiation message. Sent from the guest to the host.
|
|
|
|
* The guest is free to try different versions until the host
|
|
|
|
* accepts the version.
|
|
|
|
*
|
|
|
|
* pci_version: The protocol version requested.
|
|
|
|
* is_last_attempt: If TRUE, this is the last version guest will request.
|
|
|
|
* reservedz: Reserved field, set to zero.
|
|
|
|
*/
|
|
|
|
|
|
|
|
struct pci_version_request {
|
|
|
|
struct pci_message message_type;
|
2017-05-25 04:41:24 +08:00
|
|
|
u32 protocol_version;
|
2016-02-17 05:56:23 +08:00
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Bus D0 Entry. This is sent from the guest to the host when the virtual
|
|
|
|
* bus (PCI Express port) is ready for action.
|
|
|
|
*/
|
|
|
|
|
|
|
|
struct pci_bus_d0_entry {
|
|
|
|
struct pci_message message_type;
|
|
|
|
u32 reserved;
|
|
|
|
u64 mmio_base;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
struct pci_bus_relations {
|
|
|
|
struct pci_incoming_message incoming;
|
|
|
|
u32 device_count;
|
2016-08-23 12:46:39 +08:00
|
|
|
struct pci_function_description func[0];
|
2016-02-17 05:56:23 +08:00
|
|
|
} __packed;
|
|
|
|
|
|
|
|
struct pci_q_res_req_response {
|
|
|
|
struct vmpacket_descriptor hdr;
|
|
|
|
s32 status; /* negative values are failures */
|
|
|
|
u32 probed_bar[6];
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
struct pci_set_power {
|
|
|
|
struct pci_message message_type;
|
|
|
|
union win_slot_encoding wslot;
|
|
|
|
u32 power_state; /* In Windows terms */
|
|
|
|
u32 reserved;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
struct pci_set_power_response {
|
|
|
|
struct vmpacket_descriptor hdr;
|
|
|
|
s32 status; /* negative values are failures */
|
|
|
|
union win_slot_encoding wslot;
|
|
|
|
u32 resultant_state; /* In Windows terms */
|
|
|
|
u32 reserved;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
struct pci_resources_assigned {
|
|
|
|
struct pci_message message_type;
|
|
|
|
union win_slot_encoding wslot;
|
|
|
|
u8 memory_range[0x14][6]; /* not used here */
|
|
|
|
u32 msi_descriptors;
|
|
|
|
u32 reserved[4];
|
|
|
|
} __packed;
|
|
|
|
|
2017-05-25 04:41:28 +08:00
|
|
|
struct pci_resources_assigned2 {
|
|
|
|
struct pci_message message_type;
|
|
|
|
union win_slot_encoding wslot;
|
|
|
|
u8 memory_range[0x14][6]; /* not used here */
|
|
|
|
u32 msi_descriptor_count;
|
|
|
|
u8 reserved[70];
|
|
|
|
} __packed;
|
|
|
|
|
2016-02-17 05:56:23 +08:00
|
|
|
struct pci_create_interrupt {
|
|
|
|
struct pci_message message_type;
|
|
|
|
union win_slot_encoding wslot;
|
|
|
|
struct hv_msi_desc int_desc;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
struct pci_create_int_response {
|
|
|
|
struct pci_response response;
|
|
|
|
u32 reserved;
|
|
|
|
struct tran_int_desc int_desc;
|
|
|
|
} __packed;
|
|
|
|
|
2017-05-25 04:41:28 +08:00
|
|
|
struct pci_create_interrupt2 {
|
|
|
|
struct pci_message message_type;
|
|
|
|
union win_slot_encoding wslot;
|
|
|
|
struct hv_msi_desc2 int_desc;
|
|
|
|
} __packed;
|
|
|
|
|
2016-02-17 05:56:23 +08:00
|
|
|
struct pci_delete_interrupt {
|
|
|
|
struct pci_message message_type;
|
|
|
|
union win_slot_encoding wslot;
|
|
|
|
struct tran_int_desc int_desc;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
struct pci_dev_incoming {
|
|
|
|
struct pci_incoming_message incoming;
|
|
|
|
union win_slot_encoding wslot;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
struct pci_eject_response {
|
2016-08-23 12:45:51 +08:00
|
|
|
struct pci_message message_type;
|
2016-02-17 05:56:23 +08:00
|
|
|
union win_slot_encoding wslot;
|
|
|
|
u32 status;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
static int pci_ring_size = (4 * PAGE_SIZE);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Definitions or interrupt steering hypercall.
|
|
|
|
*/
|
|
|
|
#define HV_PARTITION_ID_SELF ((u64)-1)
|
|
|
|
#define HVCALL_RETARGET_INTERRUPT 0x7e
|
|
|
|
|
2017-05-25 04:41:28 +08:00
|
|
|
struct hv_interrupt_entry {
|
2016-02-17 05:56:23 +08:00
|
|
|
u32 source; /* 1 for MSI(-X) */
|
|
|
|
u32 reserved1;
|
|
|
|
u32 address;
|
|
|
|
u32 data;
|
2017-05-25 04:41:28 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
#define HV_VP_SET_BANK_COUNT_MAX 5 /* current implementation limit */
|
|
|
|
|
|
|
|
struct hv_vp_set {
|
|
|
|
u64 format; /* 0 (HvGenericSetSparse4k) */
|
|
|
|
u64 valid_banks;
|
|
|
|
u64 masks[HV_VP_SET_BANK_COUNT_MAX];
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* flags for hv_device_interrupt_target.flags
|
|
|
|
*/
|
|
|
|
#define HV_DEVICE_INTERRUPT_TARGET_MULTICAST 1
|
|
|
|
#define HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET 2
|
|
|
|
|
|
|
|
struct hv_device_interrupt_target {
|
2016-02-17 05:56:23 +08:00
|
|
|
u32 vector;
|
|
|
|
u32 flags;
|
2017-05-25 04:41:28 +08:00
|
|
|
union {
|
|
|
|
u64 vp_mask;
|
|
|
|
struct hv_vp_set vp_set;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
struct retarget_msi_interrupt {
|
|
|
|
u64 partition_id; /* use "self" */
|
|
|
|
u64 device_id;
|
|
|
|
struct hv_interrupt_entry int_entry;
|
|
|
|
u64 reserved2;
|
|
|
|
struct hv_device_interrupt_target int_target;
|
2016-02-17 05:56:23 +08:00
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Driver specific state.
|
|
|
|
*/
|
|
|
|
|
|
|
|
enum hv_pcibus_state {
|
|
|
|
hv_pcibus_init = 0,
|
|
|
|
hv_pcibus_probed,
|
|
|
|
hv_pcibus_installed,
|
2017-03-24 05:58:10 +08:00
|
|
|
hv_pcibus_removed,
|
2016-02-17 05:56:23 +08:00
|
|
|
hv_pcibus_maximum
|
|
|
|
};
|
|
|
|
|
|
|
|
struct hv_pcibus_device {
|
|
|
|
struct pci_sysdata sysdata;
|
|
|
|
enum hv_pcibus_state state;
|
2018-05-24 01:11:13 +08:00
|
|
|
refcount_t remove_lock;
|
2016-02-17 05:56:23 +08:00
|
|
|
struct hv_device *hdev;
|
|
|
|
resource_size_t low_mmio_space;
|
|
|
|
resource_size_t high_mmio_space;
|
|
|
|
struct resource *mem_config;
|
|
|
|
struct resource *low_mmio_res;
|
|
|
|
struct resource *high_mmio_res;
|
|
|
|
struct completion *survey_event;
|
|
|
|
struct completion remove_event;
|
|
|
|
struct pci_bus *pci_bus;
|
|
|
|
spinlock_t config_lock; /* Avoid two threads writing index page */
|
|
|
|
spinlock_t device_list_lock; /* Protect lists below */
|
|
|
|
void __iomem *cfg_addr;
|
|
|
|
|
|
|
|
struct list_head resources_for_children;
|
|
|
|
|
|
|
|
struct list_head children;
|
|
|
|
struct list_head dr_list;
|
|
|
|
|
|
|
|
struct msi_domain_info msi_info;
|
|
|
|
struct msi_controller msi_chip;
|
|
|
|
struct irq_domain *irq_domain;
|
2017-05-25 04:41:25 +08:00
|
|
|
|
|
|
|
/* hypercall arg, must not cross page boundary */
|
2016-11-09 06:04:38 +08:00
|
|
|
struct retarget_msi_interrupt retarget_msi_interrupt_params;
|
2017-05-25 04:41:25 +08:00
|
|
|
|
2016-11-09 06:04:38 +08:00
|
|
|
spinlock_t retarget_msi_interrupt_lock;
|
2018-03-15 22:20:53 +08:00
|
|
|
|
|
|
|
struct workqueue_struct *wq;
|
2016-02-17 05:56:23 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Tracks "Device Relations" messages from the host, which must be both
|
|
|
|
* processed in order and deferred so that they don't run in the context
|
|
|
|
* of the incoming packet callback.
|
|
|
|
*/
|
|
|
|
struct hv_dr_work {
|
|
|
|
struct work_struct wrk;
|
|
|
|
struct hv_pcibus_device *bus;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct hv_dr_state {
|
|
|
|
struct list_head list_entry;
|
|
|
|
u32 device_count;
|
2016-08-23 12:46:39 +08:00
|
|
|
struct pci_function_description func[0];
|
2016-02-17 05:56:23 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
enum hv_pcichild_state {
|
|
|
|
hv_pcichild_init = 0,
|
|
|
|
hv_pcichild_requirements,
|
|
|
|
hv_pcichild_resourced,
|
|
|
|
hv_pcichild_ejecting,
|
|
|
|
hv_pcichild_maximum
|
|
|
|
};
|
|
|
|
|
|
|
|
struct hv_pci_dev {
|
|
|
|
/* List protected by pci_rescan_remove_lock */
|
|
|
|
struct list_head list_entry;
|
2017-04-18 22:02:48 +08:00
|
|
|
refcount_t refs;
|
2016-02-17 05:56:23 +08:00
|
|
|
enum hv_pcichild_state state;
|
2018-09-15 03:54:56 +08:00
|
|
|
struct pci_slot *pci_slot;
|
2016-02-17 05:56:23 +08:00
|
|
|
struct pci_function_description desc;
|
|
|
|
bool reported_missing;
|
|
|
|
struct hv_pcibus_device *hbus;
|
|
|
|
struct work_struct wrk;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* What would be observed if one wrote 0xFFFFFFFF to a BAR and then
|
|
|
|
* read it back, for each of the BAR offsets within config space.
|
|
|
|
*/
|
|
|
|
u32 probed_bar[6];
|
|
|
|
};
|
|
|
|
|
|
|
|
struct hv_pci_compl {
|
|
|
|
struct completion host_event;
|
|
|
|
s32 completion_status;
|
|
|
|
};
|
|
|
|
|
PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()
1. With the patch "x86/vector/msi: Switch to global reservation mode",
the recent v4.15 and newer kernels always hang for 1-vCPU Hyper-V VM
with SR-IOV. This is because when we reach hv_compose_msi_msg() by
request_irq() -> request_threaded_irq() ->__setup_irq()->irq_startup()
-> __irq_startup() -> irq_domain_activate_irq() -> ... ->
msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is
disabled in __setup_irq().
Note: when we reach hv_compose_msi_msg() by another code path:
pci_enable_msix_range() -> ... -> irq_domain_activate_irq() -> ... ->
hv_compose_msi_msg(), local irq is not disabled.
hv_compose_msi_msg() depends on an interrupt from the host.
With interrupts disabled, a UP VM always hangs in the busy loop in
the function, because the interrupt callback hv_pci_onchannelcallback()
can not be called.
We can do nothing but work it around by polling the channel. This
is ugly, but we don't have any other choice.
2. If the host is ejecting the VF device before we reach
hv_compose_msi_msg(), in a UP VM, we can hang in hv_compose_msi_msg()
forever, because at this time the host doesn't respond to the
CREATE_INTERRUPT request. This issue exists the first day the
pci-hyperv driver appears in the kernel.
Luckily, this can also by worked around by polling the channel
for the PCI_EJECT message and hpdev->state, and by checking the
PCI vendor ID.
Note: actually the above 2 issues also happen to a SMP VM, if
"hbus->hdev->channel->target_cpu == smp_processor_id()" is true.
Fixes: 4900be83602b ("x86/vector/msi: Switch to global reservation mode")
Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
Tested-by: Chris Valean <v-chvale@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: <stable@vger.kernel.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
2018-03-15 22:21:08 +08:00
|
|
|
static void hv_pci_onchannelcallback(void *context);
|
|
|
|
|
2016-02-17 05:56:23 +08:00
|
|
|
/**
|
|
|
|
* hv_pci_generic_compl() - Invoked for a completion packet
|
|
|
|
* @context: Set up by the sender of the packet.
|
|
|
|
* @resp: The response packet
|
|
|
|
* @resp_packet_size: Size in bytes of the packet
|
|
|
|
*
|
|
|
|
* This function is used to trigger an event and report status
|
|
|
|
* for any message for which the completion packet contains a
|
|
|
|
* status and nothing else.
|
|
|
|
*/
|
2016-08-23 12:49:22 +08:00
|
|
|
static void hv_pci_generic_compl(void *context, struct pci_response *resp,
|
|
|
|
int resp_packet_size)
|
2016-02-17 05:56:23 +08:00
|
|
|
{
|
|
|
|
struct hv_pci_compl *comp_pkt = context;
|
|
|
|
|
|
|
|
if (resp_packet_size >= offsetofend(struct pci_response, status))
|
|
|
|
comp_pkt->completion_status = resp->status;
|
2016-08-23 12:49:22 +08:00
|
|
|
else
|
|
|
|
comp_pkt->completion_status = -1;
|
|
|
|
|
2016-02-17 05:56:23 +08:00
|
|
|
complete(&comp_pkt->host_event);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct hv_pci_dev *get_pcichild_wslot(struct hv_pcibus_device *hbus,
|
|
|
|
u32 wslot);
|
2018-05-24 01:11:12 +08:00
|
|
|
|
|
|
|
static void get_pcichild(struct hv_pci_dev *hpdev)
|
|
|
|
{
|
|
|
|
refcount_inc(&hpdev->refs);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void put_pcichild(struct hv_pci_dev *hpdev)
|
|
|
|
{
|
|
|
|
if (refcount_dec_and_test(&hpdev->refs))
|
|
|
|
kfree(hpdev);
|
|
|
|
}
|
2016-02-17 05:56:23 +08:00
|
|
|
|
|
|
|
static void get_hvpcibus(struct hv_pcibus_device *hv_pcibus);
|
|
|
|
static void put_hvpcibus(struct hv_pcibus_device *hv_pcibus);
|
|
|
|
|
2018-05-24 05:12:01 +08:00
|
|
|
/*
|
|
|
|
* There is no good way to get notified from vmbus_onoffer_rescind(),
|
|
|
|
* so let's use polling here, since this is not a hot path.
|
|
|
|
*/
|
|
|
|
static int wait_for_response(struct hv_device *hdev,
|
|
|
|
struct completion *comp)
|
|
|
|
{
|
|
|
|
while (true) {
|
|
|
|
if (hdev->channel->rescind) {
|
|
|
|
dev_warn_once(&hdev->device, "The device is gone.\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (wait_for_completion_timeout(comp, HZ / 10))
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-02-17 05:56:23 +08:00
|
|
|
/**
|
|
|
|
* devfn_to_wslot() - Convert from Linux PCI slot to Windows
|
|
|
|
* @devfn: The Linux representation of PCI slot
|
|
|
|
*
|
|
|
|
* Windows uses a slightly different representation of PCI slot.
|
|
|
|
*
|
|
|
|
* Return: The Windows representation
|
|
|
|
*/
|
|
|
|
static u32 devfn_to_wslot(int devfn)
|
|
|
|
{
|
|
|
|
union win_slot_encoding wslot;
|
|
|
|
|
|
|
|
wslot.slot = 0;
|
2017-02-11 05:18:46 +08:00
|
|
|
wslot.bits.dev = PCI_SLOT(devfn);
|
|
|
|
wslot.bits.func = PCI_FUNC(devfn);
|
2016-02-17 05:56:23 +08:00
|
|
|
|
|
|
|
return wslot.slot;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* wslot_to_devfn() - Convert from Windows PCI slot to Linux
|
|
|
|
* @wslot: The Windows representation of PCI slot
|
|
|
|
*
|
|
|
|
* Windows uses a slightly different representation of PCI slot.
|
|
|
|
*
|
|
|
|
* Return: The Linux representation
|
|
|
|
*/
|
|
|
|
static int wslot_to_devfn(u32 wslot)
|
|
|
|
{
|
|
|
|
union win_slot_encoding slot_no;
|
|
|
|
|
|
|
|
slot_no.slot = wslot;
|
2017-02-11 05:18:46 +08:00
|
|
|
return PCI_DEVFN(slot_no.bits.dev, slot_no.bits.func);
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* PCI Configuration Space for these root PCI buses is implemented as a pair
|
|
|
|
* of pages in memory-mapped I/O space. Writing to the first page chooses
|
|
|
|
* the PCI function being written or read. Once the first page has been
|
|
|
|
* written to, the following page maps in the entire configuration space of
|
|
|
|
* the function.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/**
|
|
|
|
* _hv_pcifront_read_config() - Internal PCI config read
|
|
|
|
* @hpdev: The PCI driver's representation of the device
|
|
|
|
* @where: Offset within config space
|
|
|
|
* @size: Size of the transfer
|
|
|
|
* @val: Pointer to the buffer receiving the data
|
|
|
|
*/
|
|
|
|
static void _hv_pcifront_read_config(struct hv_pci_dev *hpdev, int where,
|
|
|
|
int size, u32 *val)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
void __iomem *addr = hpdev->hbus->cfg_addr + CFG_PAGE_OFFSET + where;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the attempt is to read the IDs or the ROM BAR, simulate that.
|
|
|
|
*/
|
|
|
|
if (where + size <= PCI_COMMAND) {
|
|
|
|
memcpy(val, ((u8 *)&hpdev->desc.v_id) + where, size);
|
|
|
|
} else if (where >= PCI_CLASS_REVISION && where + size <=
|
|
|
|
PCI_CACHE_LINE_SIZE) {
|
|
|
|
memcpy(val, ((u8 *)&hpdev->desc.rev) + where -
|
|
|
|
PCI_CLASS_REVISION, size);
|
|
|
|
} else if (where >= PCI_SUBSYSTEM_VENDOR_ID && where + size <=
|
|
|
|
PCI_ROM_ADDRESS) {
|
|
|
|
memcpy(val, (u8 *)&hpdev->desc.subsystem_id + where -
|
|
|
|
PCI_SUBSYSTEM_VENDOR_ID, size);
|
|
|
|
} else if (where >= PCI_ROM_ADDRESS && where + size <=
|
|
|
|
PCI_CAPABILITY_LIST) {
|
|
|
|
/* ROM BARs are unimplemented */
|
|
|
|
*val = 0;
|
|
|
|
} else if (where >= PCI_INTERRUPT_LINE && where + size <=
|
|
|
|
PCI_INTERRUPT_PIN) {
|
|
|
|
/*
|
|
|
|
* Interrupt Line and Interrupt PIN are hard-wired to zero
|
|
|
|
* because this front-end only supports message-signaled
|
|
|
|
* interrupts.
|
|
|
|
*/
|
|
|
|
*val = 0;
|
|
|
|
} else if (where + size <= CFG_PAGE_SIZE) {
|
|
|
|
spin_lock_irqsave(&hpdev->hbus->config_lock, flags);
|
|
|
|
/* Choose the function to be read. (See comment above) */
|
|
|
|
writel(hpdev->desc.win_slot.slot, hpdev->hbus->cfg_addr);
|
2016-05-03 20:22:00 +08:00
|
|
|
/* Make sure the function was chosen before we start reading. */
|
|
|
|
mb();
|
2016-02-17 05:56:23 +08:00
|
|
|
/* Read from that function's config space. */
|
|
|
|
switch (size) {
|
|
|
|
case 1:
|
|
|
|
*val = readb(addr);
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
*val = readw(addr);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
*val = readl(addr);
|
|
|
|
break;
|
|
|
|
}
|
2016-05-03 20:22:00 +08:00
|
|
|
/*
|
2018-03-15 22:21:35 +08:00
|
|
|
* Make sure the read was done before we release the spinlock
|
2016-05-03 20:22:00 +08:00
|
|
|
* allowing consecutive reads/writes.
|
|
|
|
*/
|
|
|
|
mb();
|
2016-02-17 05:56:23 +08:00
|
|
|
spin_unlock_irqrestore(&hpdev->hbus->config_lock, flags);
|
|
|
|
} else {
|
|
|
|
dev_err(&hpdev->hbus->hdev->device,
|
|
|
|
"Attempt to read beyond a function's config space.\n");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()
1. With the patch "x86/vector/msi: Switch to global reservation mode",
the recent v4.15 and newer kernels always hang for 1-vCPU Hyper-V VM
with SR-IOV. This is because when we reach hv_compose_msi_msg() by
request_irq() -> request_threaded_irq() ->__setup_irq()->irq_startup()
-> __irq_startup() -> irq_domain_activate_irq() -> ... ->
msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is
disabled in __setup_irq().
Note: when we reach hv_compose_msi_msg() by another code path:
pci_enable_msix_range() -> ... -> irq_domain_activate_irq() -> ... ->
hv_compose_msi_msg(), local irq is not disabled.
hv_compose_msi_msg() depends on an interrupt from the host.
With interrupts disabled, a UP VM always hangs in the busy loop in
the function, because the interrupt callback hv_pci_onchannelcallback()
can not be called.
We can do nothing but work it around by polling the channel. This
is ugly, but we don't have any other choice.
2. If the host is ejecting the VF device before we reach
hv_compose_msi_msg(), in a UP VM, we can hang in hv_compose_msi_msg()
forever, because at this time the host doesn't respond to the
CREATE_INTERRUPT request. This issue exists the first day the
pci-hyperv driver appears in the kernel.
Luckily, this can also by worked around by polling the channel
for the PCI_EJECT message and hpdev->state, and by checking the
PCI vendor ID.
Note: actually the above 2 issues also happen to a SMP VM, if
"hbus->hdev->channel->target_cpu == smp_processor_id()" is true.
Fixes: 4900be83602b ("x86/vector/msi: Switch to global reservation mode")
Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
Tested-by: Chris Valean <v-chvale@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: <stable@vger.kernel.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
2018-03-15 22:21:08 +08:00
|
|
|
static u16 hv_pcifront_get_vendor_id(struct hv_pci_dev *hpdev)
|
|
|
|
{
|
|
|
|
u16 ret;
|
|
|
|
unsigned long flags;
|
|
|
|
void __iomem *addr = hpdev->hbus->cfg_addr + CFG_PAGE_OFFSET +
|
|
|
|
PCI_VENDOR_ID;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&hpdev->hbus->config_lock, flags);
|
|
|
|
|
|
|
|
/* Choose the function to be read. (See comment above) */
|
|
|
|
writel(hpdev->desc.win_slot.slot, hpdev->hbus->cfg_addr);
|
|
|
|
/* Make sure the function was chosen before we start reading. */
|
|
|
|
mb();
|
|
|
|
/* Read from that function's config space. */
|
|
|
|
ret = readw(addr);
|
|
|
|
/*
|
|
|
|
* mb() is not required here, because the spin_unlock_irqrestore()
|
|
|
|
* is a barrier.
|
|
|
|
*/
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&hpdev->hbus->config_lock, flags);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2016-02-17 05:56:23 +08:00
|
|
|
/**
|
|
|
|
* _hv_pcifront_write_config() - Internal PCI config write
|
|
|
|
* @hpdev: The PCI driver's representation of the device
|
|
|
|
* @where: Offset within config space
|
|
|
|
* @size: Size of the transfer
|
|
|
|
* @val: The data being transferred
|
|
|
|
*/
|
|
|
|
static void _hv_pcifront_write_config(struct hv_pci_dev *hpdev, int where,
|
|
|
|
int size, u32 val)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
void __iomem *addr = hpdev->hbus->cfg_addr + CFG_PAGE_OFFSET + where;
|
|
|
|
|
|
|
|
if (where >= PCI_SUBSYSTEM_VENDOR_ID &&
|
|
|
|
where + size <= PCI_CAPABILITY_LIST) {
|
|
|
|
/* SSIDs and ROM BARs are read-only */
|
|
|
|
} else if (where >= PCI_COMMAND && where + size <= CFG_PAGE_SIZE) {
|
|
|
|
spin_lock_irqsave(&hpdev->hbus->config_lock, flags);
|
|
|
|
/* Choose the function to be written. (See comment above) */
|
|
|
|
writel(hpdev->desc.win_slot.slot, hpdev->hbus->cfg_addr);
|
2016-05-03 20:22:00 +08:00
|
|
|
/* Make sure the function was chosen before we start writing. */
|
|
|
|
wmb();
|
2016-02-17 05:56:23 +08:00
|
|
|
/* Write to that function's config space. */
|
|
|
|
switch (size) {
|
|
|
|
case 1:
|
|
|
|
writeb(val, addr);
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
writew(val, addr);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
writel(val, addr);
|
|
|
|
break;
|
|
|
|
}
|
2016-05-03 20:22:00 +08:00
|
|
|
/*
|
|
|
|
* Make sure the write was done before we release the spinlock
|
|
|
|
* allowing consecutive reads/writes.
|
|
|
|
*/
|
|
|
|
mb();
|
2016-02-17 05:56:23 +08:00
|
|
|
spin_unlock_irqrestore(&hpdev->hbus->config_lock, flags);
|
|
|
|
} else {
|
|
|
|
dev_err(&hpdev->hbus->hdev->device,
|
|
|
|
"Attempt to write beyond a function's config space.\n");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_pcifront_read_config() - Read configuration space
|
|
|
|
* @bus: PCI Bus structure
|
|
|
|
* @devfn: Device/function
|
|
|
|
* @where: Offset from base
|
|
|
|
* @size: Byte/word/dword
|
|
|
|
* @val: Value to be read
|
|
|
|
*
|
|
|
|
* Return: PCIBIOS_SUCCESSFUL on success
|
|
|
|
* PCIBIOS_DEVICE_NOT_FOUND on failure
|
|
|
|
*/
|
|
|
|
static int hv_pcifront_read_config(struct pci_bus *bus, unsigned int devfn,
|
|
|
|
int where, int size, u32 *val)
|
|
|
|
{
|
|
|
|
struct hv_pcibus_device *hbus =
|
|
|
|
container_of(bus->sysdata, struct hv_pcibus_device, sysdata);
|
|
|
|
struct hv_pci_dev *hpdev;
|
|
|
|
|
|
|
|
hpdev = get_pcichild_wslot(hbus, devfn_to_wslot(devfn));
|
|
|
|
if (!hpdev)
|
|
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
|
|
|
|
_hv_pcifront_read_config(hpdev, where, size, val);
|
|
|
|
|
2018-05-24 01:11:12 +08:00
|
|
|
put_pcichild(hpdev);
|
2016-02-17 05:56:23 +08:00
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_pcifront_write_config() - Write configuration space
|
|
|
|
* @bus: PCI Bus structure
|
|
|
|
* @devfn: Device/function
|
|
|
|
* @where: Offset from base
|
|
|
|
* @size: Byte/word/dword
|
|
|
|
* @val: Value to be written to device
|
|
|
|
*
|
|
|
|
* Return: PCIBIOS_SUCCESSFUL on success
|
|
|
|
* PCIBIOS_DEVICE_NOT_FOUND on failure
|
|
|
|
*/
|
|
|
|
static int hv_pcifront_write_config(struct pci_bus *bus, unsigned int devfn,
|
|
|
|
int where, int size, u32 val)
|
|
|
|
{
|
|
|
|
struct hv_pcibus_device *hbus =
|
|
|
|
container_of(bus->sysdata, struct hv_pcibus_device, sysdata);
|
|
|
|
struct hv_pci_dev *hpdev;
|
|
|
|
|
|
|
|
hpdev = get_pcichild_wslot(hbus, devfn_to_wslot(devfn));
|
|
|
|
if (!hpdev)
|
|
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
|
|
|
|
_hv_pcifront_write_config(hpdev, where, size, val);
|
|
|
|
|
2018-05-24 01:11:12 +08:00
|
|
|
put_pcichild(hpdev);
|
2016-02-17 05:56:23 +08:00
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* PCIe operations */
|
|
|
|
static struct pci_ops hv_pcifront_ops = {
|
|
|
|
.read = hv_pcifront_read_config,
|
|
|
|
.write = hv_pcifront_write_config,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Interrupt management hooks */
|
|
|
|
static void hv_int_desc_free(struct hv_pci_dev *hpdev,
|
|
|
|
struct tran_int_desc *int_desc)
|
|
|
|
{
|
|
|
|
struct pci_delete_interrupt *int_pkt;
|
|
|
|
struct {
|
|
|
|
struct pci_packet pkt;
|
2016-08-23 12:45:51 +08:00
|
|
|
u8 buffer[sizeof(struct pci_delete_interrupt)];
|
2016-02-17 05:56:23 +08:00
|
|
|
} ctxt;
|
|
|
|
|
|
|
|
memset(&ctxt, 0, sizeof(ctxt));
|
|
|
|
int_pkt = (struct pci_delete_interrupt *)&ctxt.pkt.message;
|
2016-08-23 12:45:51 +08:00
|
|
|
int_pkt->message_type.type =
|
2016-02-17 05:56:23 +08:00
|
|
|
PCI_DELETE_INTERRUPT_MESSAGE;
|
|
|
|
int_pkt->wslot.slot = hpdev->desc.win_slot.slot;
|
|
|
|
int_pkt->int_desc = *int_desc;
|
|
|
|
vmbus_sendpacket(hpdev->hbus->hdev->channel, int_pkt, sizeof(*int_pkt),
|
|
|
|
(unsigned long)&ctxt.pkt, VM_PKT_DATA_INBAND, 0);
|
|
|
|
kfree(int_desc);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_msi_free() - Free the MSI.
|
|
|
|
* @domain: The interrupt domain pointer
|
|
|
|
* @info: Extra MSI-related context
|
|
|
|
* @irq: Identifies the IRQ.
|
|
|
|
*
|
|
|
|
* The Hyper-V parent partition and hypervisor are tracking the
|
|
|
|
* messages that are in use, keeping the interrupt redirection
|
|
|
|
* table up to date. This callback sends a message that frees
|
|
|
|
* the IRT entry and related tracking nonsense.
|
|
|
|
*/
|
|
|
|
static void hv_msi_free(struct irq_domain *domain, struct msi_domain_info *info,
|
|
|
|
unsigned int irq)
|
|
|
|
{
|
|
|
|
struct hv_pcibus_device *hbus;
|
|
|
|
struct hv_pci_dev *hpdev;
|
|
|
|
struct pci_dev *pdev;
|
|
|
|
struct tran_int_desc *int_desc;
|
|
|
|
struct irq_data *irq_data = irq_domain_get_irq_data(domain, irq);
|
|
|
|
struct msi_desc *msi = irq_data_get_msi_desc(irq_data);
|
|
|
|
|
|
|
|
pdev = msi_desc_to_pci_dev(msi);
|
|
|
|
hbus = info->data;
|
2016-07-12 23:31:24 +08:00
|
|
|
int_desc = irq_data_get_irq_chip_data(irq_data);
|
|
|
|
if (!int_desc)
|
2016-02-17 05:56:23 +08:00
|
|
|
return;
|
|
|
|
|
2016-07-12 23:31:24 +08:00
|
|
|
irq_data->chip_data = NULL;
|
|
|
|
hpdev = get_pcichild_wslot(hbus, devfn_to_wslot(pdev->devfn));
|
|
|
|
if (!hpdev) {
|
|
|
|
kfree(int_desc);
|
|
|
|
return;
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
|
2016-07-12 23:31:24 +08:00
|
|
|
hv_int_desc_free(hpdev, int_desc);
|
2018-05-24 01:11:12 +08:00
|
|
|
put_pcichild(hpdev);
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int hv_set_affinity(struct irq_data *data, const struct cpumask *dest,
|
|
|
|
bool force)
|
|
|
|
{
|
|
|
|
struct irq_data *parent = data->parent_data;
|
|
|
|
|
|
|
|
return parent->chip->irq_set_affinity(parent, dest, force);
|
|
|
|
}
|
|
|
|
|
2016-10-31 19:04:09 +08:00
|
|
|
static void hv_irq_mask(struct irq_data *data)
|
2016-02-17 05:56:23 +08:00
|
|
|
{
|
|
|
|
pci_msi_mask_irq(data);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_irq_unmask() - "Unmask" the IRQ by setting its current
|
|
|
|
* affinity.
|
|
|
|
* @data: Describes the IRQ
|
|
|
|
*
|
|
|
|
* Build new a destination for the MSI and make a hypercall to
|
|
|
|
* update the Interrupt Redirection Table. "Device Logical ID"
|
|
|
|
* is built out of this PCI bus's instance GUID and the function
|
|
|
|
* number of the device.
|
|
|
|
*/
|
2016-10-31 19:04:09 +08:00
|
|
|
static void hv_irq_unmask(struct irq_data *data)
|
2016-02-17 05:56:23 +08:00
|
|
|
{
|
|
|
|
struct msi_desc *msi_desc = irq_data_get_msi_desc(data);
|
|
|
|
struct irq_cfg *cfg = irqd_cfg(data);
|
2016-11-09 06:04:38 +08:00
|
|
|
struct retarget_msi_interrupt *params;
|
2016-02-17 05:56:23 +08:00
|
|
|
struct hv_pcibus_device *hbus;
|
|
|
|
struct cpumask *dest;
|
|
|
|
struct pci_bus *pbus;
|
|
|
|
struct pci_dev *pdev;
|
2016-11-09 06:04:38 +08:00
|
|
|
unsigned long flags;
|
2017-05-25 04:41:28 +08:00
|
|
|
u32 var_size = 0;
|
|
|
|
int cpu_vmbus;
|
|
|
|
int cpu;
|
|
|
|
u64 res;
|
2016-02-17 05:56:23 +08:00
|
|
|
|
2017-11-02 04:30:53 +08:00
|
|
|
dest = irq_data_get_effective_affinity_mask(data);
|
2016-02-17 05:56:23 +08:00
|
|
|
pdev = msi_desc_to_pci_dev(msi_desc);
|
|
|
|
pbus = pdev->bus;
|
|
|
|
hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata);
|
|
|
|
|
2016-11-09 06:04:38 +08:00
|
|
|
spin_lock_irqsave(&hbus->retarget_msi_interrupt_lock, flags);
|
|
|
|
|
|
|
|
params = &hbus->retarget_msi_interrupt_params;
|
|
|
|
memset(params, 0, sizeof(*params));
|
|
|
|
params->partition_id = HV_PARTITION_ID_SELF;
|
2017-05-25 04:41:28 +08:00
|
|
|
params->int_entry.source = 1; /* MSI(-X) */
|
|
|
|
params->int_entry.address = msi_desc->msg.address_lo;
|
|
|
|
params->int_entry.data = msi_desc->msg.data;
|
2016-11-09 06:04:38 +08:00
|
|
|
params->device_id = (hbus->hdev->dev_instance.b[5] << 24) |
|
2016-02-17 05:56:23 +08:00
|
|
|
(hbus->hdev->dev_instance.b[4] << 16) |
|
|
|
|
(hbus->hdev->dev_instance.b[7] << 8) |
|
|
|
|
(hbus->hdev->dev_instance.b[6] & 0xf8) |
|
|
|
|
PCI_FUNC(pdev->devfn);
|
2017-05-25 04:41:28 +08:00
|
|
|
params->int_target.vector = cfg->vector;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Honoring apic->irq_delivery_mode set to dest_Fixed by
|
|
|
|
* setting the HV_DEVICE_INTERRUPT_TARGET_MULTICAST flag results in a
|
|
|
|
* spurious interrupt storm. Not doing so does not seem to have a
|
|
|
|
* negative effect (yet?).
|
|
|
|
*/
|
|
|
|
|
|
|
|
if (pci_protocol_version >= PCI_PROTOCOL_VERSION_1_2) {
|
|
|
|
/*
|
|
|
|
* PCI_PROTOCOL_VERSION_1_2 supports the VP_SET version of the
|
|
|
|
* HVCALL_RETARGET_INTERRUPT hypercall, which also coincides
|
|
|
|
* with >64 VP support.
|
|
|
|
* ms_hyperv.hints & HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED
|
|
|
|
* is not sufficient for this hypercall.
|
|
|
|
*/
|
|
|
|
params->int_target.flags |=
|
|
|
|
HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET;
|
|
|
|
params->int_target.vp_set.valid_banks =
|
|
|
|
(1ull << HV_VP_SET_BANK_COUNT_MAX) - 1;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* var-sized hypercall, var-size starts after vp_mask (thus
|
|
|
|
* vp_set.format does not count, but vp_set.valid_banks does).
|
|
|
|
*/
|
|
|
|
var_size = 1 + HV_VP_SET_BANK_COUNT_MAX;
|
|
|
|
|
|
|
|
for_each_cpu_and(cpu, dest, cpu_online_mask) {
|
2017-08-03 00:09:18 +08:00
|
|
|
cpu_vmbus = hv_cpu_number_to_vp_number(cpu);
|
2017-05-25 04:41:28 +08:00
|
|
|
|
|
|
|
if (cpu_vmbus >= HV_VP_SET_BANK_COUNT_MAX * 64) {
|
|
|
|
dev_err(&hbus->hdev->device,
|
|
|
|
"too high CPU %d", cpu_vmbus);
|
|
|
|
res = 1;
|
|
|
|
goto exit_unlock;
|
|
|
|
}
|
2016-02-17 05:56:23 +08:00
|
|
|
|
2017-05-25 04:41:28 +08:00
|
|
|
params->int_target.vp_set.masks[cpu_vmbus / 64] |=
|
|
|
|
(1ULL << (cpu_vmbus & 63));
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
for_each_cpu_and(cpu, dest, cpu_online_mask) {
|
|
|
|
params->int_target.vp_mask |=
|
2017-08-03 00:09:18 +08:00
|
|
|
(1ULL << hv_cpu_number_to_vp_number(cpu));
|
2017-05-25 04:41:28 +08:00
|
|
|
}
|
|
|
|
}
|
2016-11-09 06:04:38 +08:00
|
|
|
|
2017-05-25 04:41:28 +08:00
|
|
|
res = hv_do_hypercall(HVCALL_RETARGET_INTERRUPT | (var_size << 17),
|
|
|
|
params, NULL);
|
2016-02-17 05:56:23 +08:00
|
|
|
|
2017-05-25 04:41:28 +08:00
|
|
|
exit_unlock:
|
2016-11-09 06:04:38 +08:00
|
|
|
spin_unlock_irqrestore(&hbus->retarget_msi_interrupt_lock, flags);
|
2016-02-17 05:56:23 +08:00
|
|
|
|
2017-05-25 04:41:28 +08:00
|
|
|
if (res) {
|
|
|
|
dev_err(&hbus->hdev->device,
|
|
|
|
"%s() failed: %#llx", __func__, res);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2016-02-17 05:56:23 +08:00
|
|
|
pci_msi_unmask_irq(data);
|
|
|
|
}
|
|
|
|
|
|
|
|
struct compose_comp_ctxt {
|
|
|
|
struct hv_pci_compl comp_pkt;
|
|
|
|
struct tran_int_desc int_desc;
|
|
|
|
};
|
|
|
|
|
|
|
|
static void hv_pci_compose_compl(void *context, struct pci_response *resp,
|
|
|
|
int resp_packet_size)
|
|
|
|
{
|
|
|
|
struct compose_comp_ctxt *comp_pkt = context;
|
|
|
|
struct pci_create_int_response *int_resp =
|
|
|
|
(struct pci_create_int_response *)resp;
|
|
|
|
|
|
|
|
comp_pkt->comp_pkt.completion_status = resp->status;
|
|
|
|
comp_pkt->int_desc = int_resp->int_desc;
|
|
|
|
complete(&comp_pkt->comp_pkt.host_event);
|
|
|
|
}
|
|
|
|
|
2017-05-25 04:41:28 +08:00
|
|
|
static u32 hv_compose_msi_req_v1(
|
|
|
|
struct pci_create_interrupt *int_pkt, struct cpumask *affinity,
|
|
|
|
u32 slot, u8 vector)
|
|
|
|
{
|
|
|
|
int_pkt->message_type.type = PCI_CREATE_INTERRUPT_MESSAGE;
|
|
|
|
int_pkt->wslot.slot = slot;
|
|
|
|
int_pkt->int_desc.vector = vector;
|
|
|
|
int_pkt->int_desc.vector_count = 1;
|
2017-12-28 18:33:33 +08:00
|
|
|
int_pkt->int_desc.delivery_mode = dest_Fixed;
|
2017-05-25 04:41:28 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Create MSI w/ dummy vCPU set, overwritten by subsequent retarget in
|
|
|
|
* hv_irq_unmask().
|
|
|
|
*/
|
|
|
|
int_pkt->int_desc.cpu_mask = CPU_AFFINITY_ALL;
|
|
|
|
|
|
|
|
return sizeof(*int_pkt);
|
|
|
|
}
|
|
|
|
|
|
|
|
static u32 hv_compose_msi_req_v2(
|
|
|
|
struct pci_create_interrupt2 *int_pkt, struct cpumask *affinity,
|
|
|
|
u32 slot, u8 vector)
|
|
|
|
{
|
|
|
|
int cpu;
|
|
|
|
|
|
|
|
int_pkt->message_type.type = PCI_CREATE_INTERRUPT_MESSAGE2;
|
|
|
|
int_pkt->wslot.slot = slot;
|
|
|
|
int_pkt->int_desc.vector = vector;
|
|
|
|
int_pkt->int_desc.vector_count = 1;
|
2017-12-28 18:33:33 +08:00
|
|
|
int_pkt->int_desc.delivery_mode = dest_Fixed;
|
2017-05-25 04:41:28 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Create MSI w/ dummy vCPU set targeting just one vCPU, overwritten
|
|
|
|
* by subsequent retarget in hv_irq_unmask().
|
|
|
|
*/
|
|
|
|
cpu = cpumask_first_and(affinity, cpu_online_mask);
|
|
|
|
int_pkt->int_desc.processor_array[0] =
|
2017-08-03 00:09:18 +08:00
|
|
|
hv_cpu_number_to_vp_number(cpu);
|
2017-05-25 04:41:28 +08:00
|
|
|
int_pkt->int_desc.processor_count = 1;
|
|
|
|
|
|
|
|
return sizeof(*int_pkt);
|
|
|
|
}
|
|
|
|
|
2016-02-17 05:56:23 +08:00
|
|
|
/**
|
|
|
|
* hv_compose_msi_msg() - Supplies a valid MSI address/data
|
|
|
|
* @data: Everything about this MSI
|
|
|
|
* @msg: Buffer that is filled in by this function
|
|
|
|
*
|
|
|
|
* This function unpacks the IRQ looking for target CPU set, IDT
|
|
|
|
* vector and mode and sends a message to the parent partition
|
|
|
|
* asking for a mapping for that tuple in this partition. The
|
|
|
|
* response supplies a data value and address to which that data
|
|
|
|
* should be written to trigger that interrupt.
|
|
|
|
*/
|
|
|
|
static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
|
|
|
|
{
|
|
|
|
struct irq_cfg *cfg = irqd_cfg(data);
|
|
|
|
struct hv_pcibus_device *hbus;
|
|
|
|
struct hv_pci_dev *hpdev;
|
|
|
|
struct pci_bus *pbus;
|
|
|
|
struct pci_dev *pdev;
|
2017-11-02 04:30:53 +08:00
|
|
|
struct cpumask *dest;
|
2018-07-10 02:16:07 +08:00
|
|
|
unsigned long flags;
|
2016-02-17 05:56:23 +08:00
|
|
|
struct compose_comp_ctxt comp;
|
|
|
|
struct tran_int_desc *int_desc;
|
|
|
|
struct {
|
2017-05-25 04:41:28 +08:00
|
|
|
struct pci_packet pci_pkt;
|
|
|
|
union {
|
|
|
|
struct pci_create_interrupt v1;
|
|
|
|
struct pci_create_interrupt2 v2;
|
|
|
|
} int_pkts;
|
|
|
|
} __packed ctxt;
|
|
|
|
|
|
|
|
u32 size;
|
2016-02-17 05:56:23 +08:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
pdev = msi_desc_to_pci_dev(irq_data_get_msi_desc(data));
|
2017-11-02 04:30:53 +08:00
|
|
|
dest = irq_data_get_effective_affinity_mask(data);
|
2016-02-17 05:56:23 +08:00
|
|
|
pbus = pdev->bus;
|
|
|
|
hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata);
|
|
|
|
hpdev = get_pcichild_wslot(hbus, devfn_to_wslot(pdev->devfn));
|
|
|
|
if (!hpdev)
|
|
|
|
goto return_null_message;
|
|
|
|
|
|
|
|
/* Free any previous message that might have already been composed. */
|
|
|
|
if (data->chip_data) {
|
|
|
|
int_desc = data->chip_data;
|
|
|
|
data->chip_data = NULL;
|
|
|
|
hv_int_desc_free(hpdev, int_desc);
|
|
|
|
}
|
|
|
|
|
2017-03-25 02:07:22 +08:00
|
|
|
int_desc = kzalloc(sizeof(*int_desc), GFP_ATOMIC);
|
2016-02-17 05:56:23 +08:00
|
|
|
if (!int_desc)
|
|
|
|
goto drop_reference;
|
|
|
|
|
|
|
|
memset(&ctxt, 0, sizeof(ctxt));
|
|
|
|
init_completion(&comp.comp_pkt.host_event);
|
2017-05-25 04:41:28 +08:00
|
|
|
ctxt.pci_pkt.completion_func = hv_pci_compose_compl;
|
|
|
|
ctxt.pci_pkt.compl_ctxt = ∁
|
|
|
|
|
|
|
|
switch (pci_protocol_version) {
|
|
|
|
case PCI_PROTOCOL_VERSION_1_1:
|
|
|
|
size = hv_compose_msi_req_v1(&ctxt.int_pkts.v1,
|
2017-11-02 04:30:53 +08:00
|
|
|
dest,
|
2017-05-25 04:41:28 +08:00
|
|
|
hpdev->desc.win_slot.slot,
|
|
|
|
cfg->vector);
|
|
|
|
break;
|
2016-02-17 05:56:23 +08:00
|
|
|
|
2017-05-25 04:41:28 +08:00
|
|
|
case PCI_PROTOCOL_VERSION_1_2:
|
|
|
|
size = hv_compose_msi_req_v2(&ctxt.int_pkts.v2,
|
2017-11-02 04:30:53 +08:00
|
|
|
dest,
|
2017-05-25 04:41:28 +08:00
|
|
|
hpdev->desc.win_slot.slot,
|
|
|
|
cfg->vector);
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
/* As we only negotiate protocol versions known to this driver,
|
|
|
|
* this path should never hit. However, this is it not a hot
|
|
|
|
* path so we print a message to aid future updates.
|
|
|
|
*/
|
|
|
|
dev_err(&hbus->hdev->device,
|
|
|
|
"Unexpected vPCI protocol, update driver.");
|
|
|
|
goto free_int_desc;
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
|
2017-05-25 04:41:28 +08:00
|
|
|
ret = vmbus_sendpacket(hpdev->hbus->hdev->channel, &ctxt.int_pkts,
|
|
|
|
size, (unsigned long)&ctxt.pci_pkt,
|
2016-02-17 05:56:23 +08:00
|
|
|
VM_PKT_DATA_INBAND,
|
|
|
|
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
|
2017-05-25 04:41:28 +08:00
|
|
|
if (ret) {
|
|
|
|
dev_err(&hbus->hdev->device,
|
|
|
|
"Sending request for interrupt failed: 0x%x",
|
|
|
|
comp.comp_pkt.completion_status);
|
2016-08-23 12:48:11 +08:00
|
|
|
goto free_int_desc;
|
2017-05-25 04:41:28 +08:00
|
|
|
}
|
2016-08-23 12:48:11 +08:00
|
|
|
|
2017-08-01 07:48:29 +08:00
|
|
|
/*
|
|
|
|
* Since this function is called with IRQ locks held, can't
|
|
|
|
* do normal wait for completion; instead poll.
|
|
|
|
*/
|
PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()
1. With the patch "x86/vector/msi: Switch to global reservation mode",
the recent v4.15 and newer kernels always hang for 1-vCPU Hyper-V VM
with SR-IOV. This is because when we reach hv_compose_msi_msg() by
request_irq() -> request_threaded_irq() ->__setup_irq()->irq_startup()
-> __irq_startup() -> irq_domain_activate_irq() -> ... ->
msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is
disabled in __setup_irq().
Note: when we reach hv_compose_msi_msg() by another code path:
pci_enable_msix_range() -> ... -> irq_domain_activate_irq() -> ... ->
hv_compose_msi_msg(), local irq is not disabled.
hv_compose_msi_msg() depends on an interrupt from the host.
With interrupts disabled, a UP VM always hangs in the busy loop in
the function, because the interrupt callback hv_pci_onchannelcallback()
can not be called.
We can do nothing but work it around by polling the channel. This
is ugly, but we don't have any other choice.
2. If the host is ejecting the VF device before we reach
hv_compose_msi_msg(), in a UP VM, we can hang in hv_compose_msi_msg()
forever, because at this time the host doesn't respond to the
CREATE_INTERRUPT request. This issue exists the first day the
pci-hyperv driver appears in the kernel.
Luckily, this can also by worked around by polling the channel
for the PCI_EJECT message and hpdev->state, and by checking the
PCI vendor ID.
Note: actually the above 2 issues also happen to a SMP VM, if
"hbus->hdev->channel->target_cpu == smp_processor_id()" is true.
Fixes: 4900be83602b ("x86/vector/msi: Switch to global reservation mode")
Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
Tested-by: Chris Valean <v-chvale@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: <stable@vger.kernel.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
2018-03-15 22:21:08 +08:00
|
|
|
while (!try_wait_for_completion(&comp.comp_pkt.host_event)) {
|
|
|
|
/* 0xFFFF means an invalid PCI VENDOR ID. */
|
|
|
|
if (hv_pcifront_get_vendor_id(hpdev) == 0xFFFF) {
|
|
|
|
dev_err_once(&hbus->hdev->device,
|
|
|
|
"the device has gone\n");
|
|
|
|
goto free_int_desc;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* When the higher level interrupt code calls us with
|
|
|
|
* interrupt disabled, we must poll the channel by calling
|
|
|
|
* the channel callback directly when channel->target_cpu is
|
|
|
|
* the current CPU. When the higher level interrupt code
|
|
|
|
* calls us with interrupt enabled, let's add the
|
2018-07-10 02:16:07 +08:00
|
|
|
* local_irq_save()/restore() to avoid race:
|
|
|
|
* hv_pci_onchannelcallback() can also run in tasklet.
|
PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()
1. With the patch "x86/vector/msi: Switch to global reservation mode",
the recent v4.15 and newer kernels always hang for 1-vCPU Hyper-V VM
with SR-IOV. This is because when we reach hv_compose_msi_msg() by
request_irq() -> request_threaded_irq() ->__setup_irq()->irq_startup()
-> __irq_startup() -> irq_domain_activate_irq() -> ... ->
msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is
disabled in __setup_irq().
Note: when we reach hv_compose_msi_msg() by another code path:
pci_enable_msix_range() -> ... -> irq_domain_activate_irq() -> ... ->
hv_compose_msi_msg(), local irq is not disabled.
hv_compose_msi_msg() depends on an interrupt from the host.
With interrupts disabled, a UP VM always hangs in the busy loop in
the function, because the interrupt callback hv_pci_onchannelcallback()
can not be called.
We can do nothing but work it around by polling the channel. This
is ugly, but we don't have any other choice.
2. If the host is ejecting the VF device before we reach
hv_compose_msi_msg(), in a UP VM, we can hang in hv_compose_msi_msg()
forever, because at this time the host doesn't respond to the
CREATE_INTERRUPT request. This issue exists the first day the
pci-hyperv driver appears in the kernel.
Luckily, this can also by worked around by polling the channel
for the PCI_EJECT message and hpdev->state, and by checking the
PCI vendor ID.
Note: actually the above 2 issues also happen to a SMP VM, if
"hbus->hdev->channel->target_cpu == smp_processor_id()" is true.
Fixes: 4900be83602b ("x86/vector/msi: Switch to global reservation mode")
Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
Tested-by: Chris Valean <v-chvale@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: <stable@vger.kernel.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
2018-03-15 22:21:08 +08:00
|
|
|
*/
|
2018-07-10 02:16:07 +08:00
|
|
|
local_irq_save(flags);
|
PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()
1. With the patch "x86/vector/msi: Switch to global reservation mode",
the recent v4.15 and newer kernels always hang for 1-vCPU Hyper-V VM
with SR-IOV. This is because when we reach hv_compose_msi_msg() by
request_irq() -> request_threaded_irq() ->__setup_irq()->irq_startup()
-> __irq_startup() -> irq_domain_activate_irq() -> ... ->
msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is
disabled in __setup_irq().
Note: when we reach hv_compose_msi_msg() by another code path:
pci_enable_msix_range() -> ... -> irq_domain_activate_irq() -> ... ->
hv_compose_msi_msg(), local irq is not disabled.
hv_compose_msi_msg() depends on an interrupt from the host.
With interrupts disabled, a UP VM always hangs in the busy loop in
the function, because the interrupt callback hv_pci_onchannelcallback()
can not be called.
We can do nothing but work it around by polling the channel. This
is ugly, but we don't have any other choice.
2. If the host is ejecting the VF device before we reach
hv_compose_msi_msg(), in a UP VM, we can hang in hv_compose_msi_msg()
forever, because at this time the host doesn't respond to the
CREATE_INTERRUPT request. This issue exists the first day the
pci-hyperv driver appears in the kernel.
Luckily, this can also by worked around by polling the channel
for the PCI_EJECT message and hpdev->state, and by checking the
PCI vendor ID.
Note: actually the above 2 issues also happen to a SMP VM, if
"hbus->hdev->channel->target_cpu == smp_processor_id()" is true.
Fixes: 4900be83602b ("x86/vector/msi: Switch to global reservation mode")
Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
Tested-by: Chris Valean <v-chvale@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: <stable@vger.kernel.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
2018-03-15 22:21:08 +08:00
|
|
|
|
|
|
|
if (hbus->hdev->channel->target_cpu == smp_processor_id())
|
|
|
|
hv_pci_onchannelcallback(hbus);
|
|
|
|
|
2018-07-10 02:16:07 +08:00
|
|
|
local_irq_restore(flags);
|
PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()
1. With the patch "x86/vector/msi: Switch to global reservation mode",
the recent v4.15 and newer kernels always hang for 1-vCPU Hyper-V VM
with SR-IOV. This is because when we reach hv_compose_msi_msg() by
request_irq() -> request_threaded_irq() ->__setup_irq()->irq_startup()
-> __irq_startup() -> irq_domain_activate_irq() -> ... ->
msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is
disabled in __setup_irq().
Note: when we reach hv_compose_msi_msg() by another code path:
pci_enable_msix_range() -> ... -> irq_domain_activate_irq() -> ... ->
hv_compose_msi_msg(), local irq is not disabled.
hv_compose_msi_msg() depends on an interrupt from the host.
With interrupts disabled, a UP VM always hangs in the busy loop in
the function, because the interrupt callback hv_pci_onchannelcallback()
can not be called.
We can do nothing but work it around by polling the channel. This
is ugly, but we don't have any other choice.
2. If the host is ejecting the VF device before we reach
hv_compose_msi_msg(), in a UP VM, we can hang in hv_compose_msi_msg()
forever, because at this time the host doesn't respond to the
CREATE_INTERRUPT request. This issue exists the first day the
pci-hyperv driver appears in the kernel.
Luckily, this can also by worked around by polling the channel
for the PCI_EJECT message and hpdev->state, and by checking the
PCI vendor ID.
Note: actually the above 2 issues also happen to a SMP VM, if
"hbus->hdev->channel->target_cpu == smp_processor_id()" is true.
Fixes: 4900be83602b ("x86/vector/msi: Switch to global reservation mode")
Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
Tested-by: Chris Valean <v-chvale@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: <stable@vger.kernel.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
2018-03-15 22:21:08 +08:00
|
|
|
|
|
|
|
if (hpdev->state == hv_pcichild_ejecting) {
|
|
|
|
dev_err_once(&hbus->hdev->device,
|
|
|
|
"the device is being ejected\n");
|
|
|
|
goto free_int_desc;
|
|
|
|
}
|
|
|
|
|
2017-08-01 07:48:29 +08:00
|
|
|
udelay(100);
|
PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()
1. With the patch "x86/vector/msi: Switch to global reservation mode",
the recent v4.15 and newer kernels always hang for 1-vCPU Hyper-V VM
with SR-IOV. This is because when we reach hv_compose_msi_msg() by
request_irq() -> request_threaded_irq() ->__setup_irq()->irq_startup()
-> __irq_startup() -> irq_domain_activate_irq() -> ... ->
msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is
disabled in __setup_irq().
Note: when we reach hv_compose_msi_msg() by another code path:
pci_enable_msix_range() -> ... -> irq_domain_activate_irq() -> ... ->
hv_compose_msi_msg(), local irq is not disabled.
hv_compose_msi_msg() depends on an interrupt from the host.
With interrupts disabled, a UP VM always hangs in the busy loop in
the function, because the interrupt callback hv_pci_onchannelcallback()
can not be called.
We can do nothing but work it around by polling the channel. This
is ugly, but we don't have any other choice.
2. If the host is ejecting the VF device before we reach
hv_compose_msi_msg(), in a UP VM, we can hang in hv_compose_msi_msg()
forever, because at this time the host doesn't respond to the
CREATE_INTERRUPT request. This issue exists the first day the
pci-hyperv driver appears in the kernel.
Luckily, this can also by worked around by polling the channel
for the PCI_EJECT message and hpdev->state, and by checking the
PCI vendor ID.
Note: actually the above 2 issues also happen to a SMP VM, if
"hbus->hdev->channel->target_cpu == smp_processor_id()" is true.
Fixes: 4900be83602b ("x86/vector/msi: Switch to global reservation mode")
Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
Tested-by: Chris Valean <v-chvale@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: <stable@vger.kernel.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
2018-03-15 22:21:08 +08:00
|
|
|
}
|
2016-02-17 05:56:23 +08:00
|
|
|
|
|
|
|
if (comp.comp_pkt.completion_status < 0) {
|
|
|
|
dev_err(&hbus->hdev->device,
|
|
|
|
"Request for interrupt failed: 0x%x",
|
|
|
|
comp.comp_pkt.completion_status);
|
|
|
|
goto free_int_desc;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Record the assignment so that this can be unwound later. Using
|
|
|
|
* irq_set_chip_data() here would be appropriate, but the lock it takes
|
|
|
|
* is already held.
|
|
|
|
*/
|
|
|
|
*int_desc = comp.int_desc;
|
|
|
|
data->chip_data = int_desc;
|
|
|
|
|
|
|
|
/* Pass up the result. */
|
|
|
|
msg->address_hi = comp.int_desc.address >> 32;
|
|
|
|
msg->address_lo = comp.int_desc.address & 0xffffffff;
|
|
|
|
msg->data = comp.int_desc.data;
|
|
|
|
|
2018-05-24 01:11:12 +08:00
|
|
|
put_pcichild(hpdev);
|
2016-02-17 05:56:23 +08:00
|
|
|
return;
|
|
|
|
|
|
|
|
free_int_desc:
|
|
|
|
kfree(int_desc);
|
|
|
|
drop_reference:
|
2018-05-24 01:11:12 +08:00
|
|
|
put_pcichild(hpdev);
|
2016-02-17 05:56:23 +08:00
|
|
|
return_null_message:
|
|
|
|
msg->address_hi = 0;
|
|
|
|
msg->address_lo = 0;
|
|
|
|
msg->data = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* HW Interrupt Chip Descriptor */
|
|
|
|
static struct irq_chip hv_msi_irq_chip = {
|
|
|
|
.name = "Hyper-V PCIe MSI",
|
|
|
|
.irq_compose_msi_msg = hv_compose_msi_msg,
|
|
|
|
.irq_set_affinity = hv_set_affinity,
|
|
|
|
.irq_ack = irq_chip_ack_parent,
|
|
|
|
.irq_mask = hv_irq_mask,
|
|
|
|
.irq_unmask = hv_irq_unmask,
|
|
|
|
};
|
|
|
|
|
|
|
|
static irq_hw_number_t hv_msi_domain_ops_get_hwirq(struct msi_domain_info *info,
|
|
|
|
msi_alloc_info_t *arg)
|
|
|
|
{
|
|
|
|
return arg->msi_hwirq;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct msi_domain_ops hv_msi_ops = {
|
|
|
|
.get_hwirq = hv_msi_domain_ops_get_hwirq,
|
|
|
|
.msi_prepare = pci_msi_prepare,
|
|
|
|
.set_desc = pci_msi_set_desc,
|
|
|
|
.msi_free = hv_msi_free,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_pcie_init_irq_domain() - Initialize IRQ domain
|
|
|
|
* @hbus: The root PCI bus
|
|
|
|
*
|
|
|
|
* This function creates an IRQ domain which will be used for
|
|
|
|
* interrupts from devices that have been passed through. These
|
|
|
|
* devices only support MSI and MSI-X, not line-based interrupts
|
|
|
|
* or simulations of line-based interrupts through PCIe's
|
|
|
|
* fabric-layer messages. Because interrupts are remapped, we
|
|
|
|
* can support multi-message MSI here.
|
|
|
|
*
|
|
|
|
* Return: '0' on success and error value on failure
|
|
|
|
*/
|
|
|
|
static int hv_pcie_init_irq_domain(struct hv_pcibus_device *hbus)
|
|
|
|
{
|
|
|
|
hbus->msi_info.chip = &hv_msi_irq_chip;
|
|
|
|
hbus->msi_info.ops = &hv_msi_ops;
|
|
|
|
hbus->msi_info.flags = (MSI_FLAG_USE_DEF_DOM_OPS |
|
|
|
|
MSI_FLAG_USE_DEF_CHIP_OPS | MSI_FLAG_MULTI_PCI_MSI |
|
|
|
|
MSI_FLAG_PCI_MSIX);
|
|
|
|
hbus->msi_info.handler = handle_edge_irq;
|
|
|
|
hbus->msi_info.handler_name = "edge";
|
|
|
|
hbus->msi_info.data = hbus;
|
|
|
|
hbus->irq_domain = pci_msi_create_irq_domain(hbus->sysdata.fwnode,
|
|
|
|
&hbus->msi_info,
|
|
|
|
x86_vector_domain);
|
|
|
|
if (!hbus->irq_domain) {
|
|
|
|
dev_err(&hbus->hdev->device,
|
|
|
|
"Failed to build an MSI IRQ domain\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* get_bar_size() - Get the address space consumed by a BAR
|
|
|
|
* @bar_val: Value that a BAR returned after -1 was written
|
|
|
|
* to it.
|
|
|
|
*
|
|
|
|
* This function returns the size of the BAR, rounded up to 1
|
|
|
|
* page. It has to be rounded up because the hypervisor's page
|
|
|
|
* table entry that maps the BAR into the VM can't specify an
|
|
|
|
* offset within a page. The invariant is that the hypervisor
|
|
|
|
* must place any BARs of smaller than page length at the
|
|
|
|
* beginning of a page.
|
|
|
|
*
|
|
|
|
* Return: Size in bytes of the consumed MMIO space.
|
|
|
|
*/
|
|
|
|
static u64 get_bar_size(u64 bar_val)
|
|
|
|
{
|
|
|
|
return round_up((1 + ~(bar_val & PCI_BASE_ADDRESS_MEM_MASK)),
|
|
|
|
PAGE_SIZE);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* survey_child_resources() - Total all MMIO requirements
|
|
|
|
* @hbus: Root PCI bus, as understood by this driver
|
|
|
|
*/
|
|
|
|
static void survey_child_resources(struct hv_pcibus_device *hbus)
|
|
|
|
{
|
|
|
|
struct hv_pci_dev *hpdev;
|
|
|
|
resource_size_t bar_size = 0;
|
|
|
|
unsigned long flags;
|
|
|
|
struct completion *event;
|
|
|
|
u64 bar_val;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/* If nobody is waiting on the answer, don't compute it. */
|
|
|
|
event = xchg(&hbus->survey_event, NULL);
|
|
|
|
if (!event)
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* If the answer has already been computed, go with it. */
|
|
|
|
if (hbus->low_mmio_space || hbus->high_mmio_space) {
|
|
|
|
complete(event);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_irqsave(&hbus->device_list_lock, flags);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Due to an interesting quirk of the PCI spec, all memory regions
|
|
|
|
* for a child device are a power of 2 in size and aligned in memory,
|
|
|
|
* so it's sufficient to just add them up without tracking alignment.
|
|
|
|
*/
|
2018-05-24 01:11:14 +08:00
|
|
|
list_for_each_entry(hpdev, &hbus->children, list_entry) {
|
2016-02-17 05:56:23 +08:00
|
|
|
for (i = 0; i < 6; i++) {
|
|
|
|
if (hpdev->probed_bar[i] & PCI_BASE_ADDRESS_SPACE_IO)
|
|
|
|
dev_err(&hbus->hdev->device,
|
|
|
|
"There's an I/O BAR in this list!\n");
|
|
|
|
|
|
|
|
if (hpdev->probed_bar[i] != 0) {
|
|
|
|
/*
|
|
|
|
* A probed BAR has all the upper bits set that
|
|
|
|
* can be changed.
|
|
|
|
*/
|
|
|
|
|
|
|
|
bar_val = hpdev->probed_bar[i];
|
|
|
|
if (bar_val & PCI_BASE_ADDRESS_MEM_TYPE_64)
|
|
|
|
bar_val |=
|
|
|
|
((u64)hpdev->probed_bar[++i] << 32);
|
|
|
|
else
|
|
|
|
bar_val |= 0xffffffff00000000ULL;
|
|
|
|
|
|
|
|
bar_size = get_bar_size(bar_val);
|
|
|
|
|
|
|
|
if (bar_val & PCI_BASE_ADDRESS_MEM_TYPE_64)
|
|
|
|
hbus->high_mmio_space += bar_size;
|
|
|
|
else
|
|
|
|
hbus->low_mmio_space += bar_size;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&hbus->device_list_lock, flags);
|
|
|
|
complete(event);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* prepopulate_bars() - Fill in BARs with defaults
|
|
|
|
* @hbus: Root PCI bus, as understood by this driver
|
|
|
|
*
|
|
|
|
* The core PCI driver code seems much, much happier if the BARs
|
|
|
|
* for a device have values upon first scan. So fill them in.
|
|
|
|
* The algorithm below works down from large sizes to small,
|
|
|
|
* attempting to pack the assignments optimally. The assumption,
|
|
|
|
* enforced in other parts of the code, is that the beginning of
|
|
|
|
* the memory-mapped I/O space will be aligned on the largest
|
|
|
|
* BAR size.
|
|
|
|
*/
|
|
|
|
static void prepopulate_bars(struct hv_pcibus_device *hbus)
|
|
|
|
{
|
|
|
|
resource_size_t high_size = 0;
|
|
|
|
resource_size_t low_size = 0;
|
|
|
|
resource_size_t high_base = 0;
|
|
|
|
resource_size_t low_base = 0;
|
|
|
|
resource_size_t bar_size;
|
|
|
|
struct hv_pci_dev *hpdev;
|
|
|
|
unsigned long flags;
|
|
|
|
u64 bar_val;
|
|
|
|
u32 command;
|
|
|
|
bool high;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (hbus->low_mmio_space) {
|
|
|
|
low_size = 1ULL << (63 - __builtin_clzll(hbus->low_mmio_space));
|
|
|
|
low_base = hbus->low_mmio_res->start;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (hbus->high_mmio_space) {
|
|
|
|
high_size = 1ULL <<
|
|
|
|
(63 - __builtin_clzll(hbus->high_mmio_space));
|
|
|
|
high_base = hbus->high_mmio_res->start;
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_irqsave(&hbus->device_list_lock, flags);
|
|
|
|
|
|
|
|
/* Pick addresses for the BARs. */
|
|
|
|
do {
|
2018-05-24 01:11:14 +08:00
|
|
|
list_for_each_entry(hpdev, &hbus->children, list_entry) {
|
2016-02-17 05:56:23 +08:00
|
|
|
for (i = 0; i < 6; i++) {
|
|
|
|
bar_val = hpdev->probed_bar[i];
|
|
|
|
if (bar_val == 0)
|
|
|
|
continue;
|
|
|
|
high = bar_val & PCI_BASE_ADDRESS_MEM_TYPE_64;
|
|
|
|
if (high) {
|
|
|
|
bar_val |=
|
|
|
|
((u64)hpdev->probed_bar[i + 1]
|
|
|
|
<< 32);
|
|
|
|
} else {
|
|
|
|
bar_val |= 0xffffffffULL << 32;
|
|
|
|
}
|
|
|
|
bar_size = get_bar_size(bar_val);
|
|
|
|
if (high) {
|
|
|
|
if (high_size != bar_size) {
|
|
|
|
i++;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
_hv_pcifront_write_config(hpdev,
|
|
|
|
PCI_BASE_ADDRESS_0 + (4 * i),
|
|
|
|
4,
|
|
|
|
(u32)(high_base & 0xffffff00));
|
|
|
|
i++;
|
|
|
|
_hv_pcifront_write_config(hpdev,
|
|
|
|
PCI_BASE_ADDRESS_0 + (4 * i),
|
|
|
|
4, (u32)(high_base >> 32));
|
|
|
|
high_base += bar_size;
|
|
|
|
} else {
|
|
|
|
if (low_size != bar_size)
|
|
|
|
continue;
|
|
|
|
_hv_pcifront_write_config(hpdev,
|
|
|
|
PCI_BASE_ADDRESS_0 + (4 * i),
|
|
|
|
4,
|
|
|
|
(u32)(low_base & 0xffffff00));
|
|
|
|
low_base += bar_size;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (high_size <= 1 && low_size <= 1) {
|
|
|
|
/* Set the memory enable bit. */
|
|
|
|
_hv_pcifront_read_config(hpdev, PCI_COMMAND, 2,
|
|
|
|
&command);
|
|
|
|
command |= PCI_COMMAND_MEMORY;
|
|
|
|
_hv_pcifront_write_config(hpdev, PCI_COMMAND, 2,
|
|
|
|
command);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
high_size >>= 1;
|
|
|
|
low_size >>= 1;
|
|
|
|
} while (high_size || low_size);
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&hbus->device_list_lock, flags);
|
|
|
|
}
|
|
|
|
|
2018-09-15 03:54:56 +08:00
|
|
|
/*
|
|
|
|
* Assign entries in sysfs pci slot directory.
|
|
|
|
*
|
|
|
|
* Note that this function does not need to lock the children list
|
|
|
|
* because it is called from pci_devices_present_work which
|
|
|
|
* is serialized with hv_eject_device_work because they are on the
|
|
|
|
* same ordered workqueue. Therefore hbus->children list will not change
|
|
|
|
* even when pci_create_slot sleeps.
|
|
|
|
*/
|
|
|
|
static void hv_pci_assign_slots(struct hv_pcibus_device *hbus)
|
|
|
|
{
|
|
|
|
struct hv_pci_dev *hpdev;
|
|
|
|
char name[SLOT_NAME_SIZE];
|
|
|
|
int slot_nr;
|
|
|
|
|
|
|
|
list_for_each_entry(hpdev, &hbus->children, list_entry) {
|
|
|
|
if (hpdev->pci_slot)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
slot_nr = PCI_SLOT(wslot_to_devfn(hpdev->desc.win_slot.slot));
|
|
|
|
snprintf(name, SLOT_NAME_SIZE, "%u", hpdev->desc.ser);
|
|
|
|
hpdev->pci_slot = pci_create_slot(hbus->pci_bus, slot_nr,
|
|
|
|
name, NULL);
|
2018-09-21 10:53:17 +08:00
|
|
|
if (IS_ERR(hpdev->pci_slot)) {
|
2018-09-15 03:54:56 +08:00
|
|
|
pr_warn("pci_create slot %s failed\n", name);
|
2018-09-21 10:53:17 +08:00
|
|
|
hpdev->pci_slot = NULL;
|
|
|
|
}
|
2018-09-15 03:54:56 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2016-02-17 05:56:23 +08:00
|
|
|
/**
|
|
|
|
* create_root_hv_pci_bus() - Expose a new root PCI bus
|
|
|
|
* @hbus: Root PCI bus, as understood by this driver
|
|
|
|
*
|
|
|
|
* Return: 0 on success, -errno on failure
|
|
|
|
*/
|
|
|
|
static int create_root_hv_pci_bus(struct hv_pcibus_device *hbus)
|
|
|
|
{
|
|
|
|
/* Register the device */
|
|
|
|
hbus->pci_bus = pci_create_root_bus(&hbus->hdev->device,
|
|
|
|
0, /* bus number is always zero */
|
|
|
|
&hv_pcifront_ops,
|
|
|
|
&hbus->sysdata,
|
|
|
|
&hbus->resources_for_children);
|
|
|
|
if (!hbus->pci_bus)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
hbus->pci_bus->msi = &hbus->msi_chip;
|
|
|
|
hbus->pci_bus->msi->dev = &hbus->hdev->device;
|
|
|
|
|
2017-03-24 05:58:32 +08:00
|
|
|
pci_lock_rescan_remove();
|
2016-02-17 05:56:23 +08:00
|
|
|
pci_scan_child_bus(hbus->pci_bus);
|
|
|
|
pci_bus_assign_resources(hbus->pci_bus);
|
2018-09-15 03:54:56 +08:00
|
|
|
hv_pci_assign_slots(hbus);
|
2016-02-17 05:56:23 +08:00
|
|
|
pci_bus_add_devices(hbus->pci_bus);
|
2017-03-24 05:58:32 +08:00
|
|
|
pci_unlock_rescan_remove();
|
2016-02-17 05:56:23 +08:00
|
|
|
hbus->state = hv_pcibus_installed;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct q_res_req_compl {
|
|
|
|
struct completion host_event;
|
|
|
|
struct hv_pci_dev *hpdev;
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* q_resource_requirements() - Query Resource Requirements
|
|
|
|
* @context: The completion context.
|
|
|
|
* @resp: The response that came from the host.
|
|
|
|
* @resp_packet_size: The size in bytes of resp.
|
|
|
|
*
|
|
|
|
* This function is invoked on completion of a Query Resource
|
|
|
|
* Requirements packet.
|
|
|
|
*/
|
|
|
|
static void q_resource_requirements(void *context, struct pci_response *resp,
|
|
|
|
int resp_packet_size)
|
|
|
|
{
|
|
|
|
struct q_res_req_compl *completion = context;
|
|
|
|
struct pci_q_res_req_response *q_res_req =
|
|
|
|
(struct pci_q_res_req_response *)resp;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (resp->status < 0) {
|
|
|
|
dev_err(&completion->hpdev->hbus->hdev->device,
|
|
|
|
"query resource requirements failed: %x\n",
|
|
|
|
resp->status);
|
|
|
|
} else {
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
|
|
completion->hpdev->probed_bar[i] =
|
|
|
|
q_res_req->probed_bar[i];
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
complete(&completion->host_event);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* new_pcichild_device() - Create a new child device
|
|
|
|
* @hbus: The internal struct tracking this root PCI bus.
|
|
|
|
* @desc: The information supplied so far from the host
|
|
|
|
* about the device.
|
|
|
|
*
|
|
|
|
* This function creates the tracking structure for a new child
|
|
|
|
* device and kicks off the process of figuring out what it is.
|
|
|
|
*
|
|
|
|
* Return: Pointer to the new tracking struct
|
|
|
|
*/
|
|
|
|
static struct hv_pci_dev *new_pcichild_device(struct hv_pcibus_device *hbus,
|
|
|
|
struct pci_function_description *desc)
|
|
|
|
{
|
|
|
|
struct hv_pci_dev *hpdev;
|
|
|
|
struct pci_child_message *res_req;
|
|
|
|
struct q_res_req_compl comp_pkt;
|
2016-11-10 15:17:48 +08:00
|
|
|
struct {
|
|
|
|
struct pci_packet init_packet;
|
|
|
|
u8 buffer[sizeof(struct pci_child_message)];
|
2016-02-17 05:56:23 +08:00
|
|
|
} pkt;
|
|
|
|
unsigned long flags;
|
|
|
|
int ret;
|
|
|
|
|
2018-03-18 22:53:28 +08:00
|
|
|
hpdev = kzalloc(sizeof(*hpdev), GFP_KERNEL);
|
2016-02-17 05:56:23 +08:00
|
|
|
if (!hpdev)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
hpdev->hbus = hbus;
|
|
|
|
|
|
|
|
memset(&pkt, 0, sizeof(pkt));
|
|
|
|
init_completion(&comp_pkt.host_event);
|
|
|
|
comp_pkt.hpdev = hpdev;
|
|
|
|
pkt.init_packet.compl_ctxt = &comp_pkt;
|
|
|
|
pkt.init_packet.completion_func = q_resource_requirements;
|
|
|
|
res_req = (struct pci_child_message *)&pkt.init_packet.message;
|
2016-08-23 12:45:51 +08:00
|
|
|
res_req->message_type.type = PCI_QUERY_RESOURCE_REQUIREMENTS;
|
2016-02-17 05:56:23 +08:00
|
|
|
res_req->wslot.slot = desc->win_slot.slot;
|
|
|
|
|
|
|
|
ret = vmbus_sendpacket(hbus->hdev->channel, res_req,
|
|
|
|
sizeof(struct pci_child_message),
|
|
|
|
(unsigned long)&pkt.init_packet,
|
|
|
|
VM_PKT_DATA_INBAND,
|
|
|
|
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
|
|
|
|
if (ret)
|
|
|
|
goto error;
|
|
|
|
|
2018-05-24 05:12:01 +08:00
|
|
|
if (wait_for_response(hbus->hdev, &comp_pkt.host_event))
|
|
|
|
goto error;
|
2016-02-17 05:56:23 +08:00
|
|
|
|
|
|
|
hpdev->desc = *desc;
|
2017-04-18 22:02:48 +08:00
|
|
|
refcount_set(&hpdev->refs, 1);
|
2018-05-24 01:11:12 +08:00
|
|
|
get_pcichild(hpdev);
|
2016-02-17 05:56:23 +08:00
|
|
|
spin_lock_irqsave(&hbus->device_list_lock, flags);
|
2017-02-14 02:10:11 +08:00
|
|
|
|
2016-02-17 05:56:23 +08:00
|
|
|
list_add_tail(&hpdev->list_entry, &hbus->children);
|
|
|
|
spin_unlock_irqrestore(&hbus->device_list_lock, flags);
|
|
|
|
return hpdev;
|
|
|
|
|
|
|
|
error:
|
|
|
|
kfree(hpdev);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* get_pcichild_wslot() - Find device from slot
|
|
|
|
* @hbus: Root PCI bus, as understood by this driver
|
|
|
|
* @wslot: Location on the bus
|
|
|
|
*
|
|
|
|
* This function looks up a PCI device and returns the internal
|
|
|
|
* representation of it. It acquires a reference on it, so that
|
|
|
|
* the device won't be deleted while somebody is using it. The
|
|
|
|
* caller is responsible for calling put_pcichild() to release
|
|
|
|
* this reference.
|
|
|
|
*
|
|
|
|
* Return: Internal representation of a PCI device
|
|
|
|
*/
|
|
|
|
static struct hv_pci_dev *get_pcichild_wslot(struct hv_pcibus_device *hbus,
|
|
|
|
u32 wslot)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
struct hv_pci_dev *iter, *hpdev = NULL;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&hbus->device_list_lock, flags);
|
|
|
|
list_for_each_entry(iter, &hbus->children, list_entry) {
|
|
|
|
if (iter->desc.win_slot.slot == wslot) {
|
|
|
|
hpdev = iter;
|
2018-05-24 01:11:12 +08:00
|
|
|
get_pcichild(hpdev);
|
2016-02-17 05:56:23 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&hbus->device_list_lock, flags);
|
|
|
|
|
|
|
|
return hpdev;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* pci_devices_present_work() - Handle new list of child devices
|
|
|
|
* @work: Work struct embedded in struct hv_dr_work
|
|
|
|
*
|
|
|
|
* "Bus Relations" is the Windows term for "children of this
|
|
|
|
* bus." The terminology is preserved here for people trying to
|
|
|
|
* debug the interaction between Hyper-V and Linux. This
|
|
|
|
* function is called when the parent partition reports a list
|
|
|
|
* of functions that should be observed under this PCI Express
|
|
|
|
* port (bus).
|
|
|
|
*
|
|
|
|
* This function updates the list, and must tolerate being
|
|
|
|
* called multiple times with the same information. The typical
|
|
|
|
* number of child devices is one, with very atypical cases
|
|
|
|
* involving three or four, so the algorithms used here can be
|
|
|
|
* simple and inefficient.
|
|
|
|
*
|
|
|
|
* It must also treat the omission of a previously observed device as
|
|
|
|
* notification that the device no longer exists.
|
|
|
|
*
|
2018-03-15 22:20:53 +08:00
|
|
|
* Note that this function is serialized with hv_eject_device_work(),
|
|
|
|
* because both are pushed to the ordered workqueue hbus->wq.
|
2016-02-17 05:56:23 +08:00
|
|
|
*/
|
|
|
|
static void pci_devices_present_work(struct work_struct *work)
|
|
|
|
{
|
|
|
|
u32 child_no;
|
|
|
|
bool found;
|
|
|
|
struct pci_function_description *new_desc;
|
|
|
|
struct hv_pci_dev *hpdev;
|
|
|
|
struct hv_pcibus_device *hbus;
|
|
|
|
struct list_head removed;
|
|
|
|
struct hv_dr_work *dr_wrk;
|
|
|
|
struct hv_dr_state *dr = NULL;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
dr_wrk = container_of(work, struct hv_dr_work, wrk);
|
|
|
|
hbus = dr_wrk->bus;
|
|
|
|
kfree(dr_wrk);
|
|
|
|
|
|
|
|
INIT_LIST_HEAD(&removed);
|
|
|
|
|
|
|
|
/* Pull this off the queue and process it if it was the last one. */
|
|
|
|
spin_lock_irqsave(&hbus->device_list_lock, flags);
|
|
|
|
while (!list_empty(&hbus->dr_list)) {
|
|
|
|
dr = list_first_entry(&hbus->dr_list, struct hv_dr_state,
|
|
|
|
list_entry);
|
|
|
|
list_del(&dr->list_entry);
|
|
|
|
|
|
|
|
/* Throw this away if the list still has stuff in it. */
|
|
|
|
if (!list_empty(&hbus->dr_list)) {
|
|
|
|
kfree(dr);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&hbus->device_list_lock, flags);
|
|
|
|
|
|
|
|
if (!dr) {
|
|
|
|
put_hvpcibus(hbus);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* First, mark all existing children as reported missing. */
|
|
|
|
spin_lock_irqsave(&hbus->device_list_lock, flags);
|
2018-05-24 01:11:14 +08:00
|
|
|
list_for_each_entry(hpdev, &hbus->children, list_entry) {
|
|
|
|
hpdev->reported_missing = true;
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&hbus->device_list_lock, flags);
|
|
|
|
|
|
|
|
/* Next, add back any reported devices. */
|
|
|
|
for (child_no = 0; child_no < dr->device_count; child_no++) {
|
|
|
|
found = false;
|
|
|
|
new_desc = &dr->func[child_no];
|
|
|
|
|
|
|
|
spin_lock_irqsave(&hbus->device_list_lock, flags);
|
2018-05-24 01:11:14 +08:00
|
|
|
list_for_each_entry(hpdev, &hbus->children, list_entry) {
|
|
|
|
if ((hpdev->desc.win_slot.slot == new_desc->win_slot.slot) &&
|
2016-02-17 05:56:23 +08:00
|
|
|
(hpdev->desc.v_id == new_desc->v_id) &&
|
|
|
|
(hpdev->desc.d_id == new_desc->d_id) &&
|
|
|
|
(hpdev->desc.ser == new_desc->ser)) {
|
|
|
|
hpdev->reported_missing = false;
|
|
|
|
found = true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&hbus->device_list_lock, flags);
|
|
|
|
|
|
|
|
if (!found) {
|
|
|
|
hpdev = new_pcichild_device(hbus, new_desc);
|
|
|
|
if (!hpdev)
|
|
|
|
dev_err(&hbus->hdev->device,
|
|
|
|
"couldn't record a child device.\n");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Move missing children to a list on the stack. */
|
|
|
|
spin_lock_irqsave(&hbus->device_list_lock, flags);
|
|
|
|
do {
|
|
|
|
found = false;
|
2018-05-24 01:11:14 +08:00
|
|
|
list_for_each_entry(hpdev, &hbus->children, list_entry) {
|
2016-02-17 05:56:23 +08:00
|
|
|
if (hpdev->reported_missing) {
|
|
|
|
found = true;
|
2018-05-24 01:11:12 +08:00
|
|
|
put_pcichild(hpdev);
|
2016-07-29 00:16:48 +08:00
|
|
|
list_move_tail(&hpdev->list_entry, &removed);
|
2016-02-17 05:56:23 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
} while (found);
|
|
|
|
spin_unlock_irqrestore(&hbus->device_list_lock, flags);
|
|
|
|
|
|
|
|
/* Delete everything that should no longer exist. */
|
|
|
|
while (!list_empty(&removed)) {
|
|
|
|
hpdev = list_first_entry(&removed, struct hv_pci_dev,
|
|
|
|
list_entry);
|
|
|
|
list_del(&hpdev->list_entry);
|
2018-05-24 01:11:12 +08:00
|
|
|
put_pcichild(hpdev);
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
|
2017-05-25 04:41:24 +08:00
|
|
|
switch (hbus->state) {
|
2017-03-24 05:58:10 +08:00
|
|
|
case hv_pcibus_installed:
|
|
|
|
/*
|
2017-05-25 04:41:24 +08:00
|
|
|
* Tell the core to rescan bus
|
|
|
|
* because there may have been changes.
|
|
|
|
*/
|
2016-02-17 05:56:23 +08:00
|
|
|
pci_lock_rescan_remove();
|
|
|
|
pci_scan_child_bus(hbus->pci_bus);
|
2018-09-15 03:54:56 +08:00
|
|
|
hv_pci_assign_slots(hbus);
|
2016-02-17 05:56:23 +08:00
|
|
|
pci_unlock_rescan_remove();
|
2017-03-24 05:58:10 +08:00
|
|
|
break;
|
|
|
|
|
|
|
|
case hv_pcibus_init:
|
|
|
|
case hv_pcibus_probed:
|
2016-02-17 05:56:23 +08:00
|
|
|
survey_child_resources(hbus);
|
2017-03-24 05:58:10 +08:00
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
break;
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
put_hvpcibus(hbus);
|
|
|
|
kfree(dr);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_pci_devices_present() - Handles list of new children
|
|
|
|
* @hbus: Root PCI bus, as understood by this driver
|
|
|
|
* @relations: Packet from host listing children
|
|
|
|
*
|
|
|
|
* This function is invoked whenever a new list of devices for
|
|
|
|
* this bus appears.
|
|
|
|
*/
|
|
|
|
static void hv_pci_devices_present(struct hv_pcibus_device *hbus,
|
|
|
|
struct pci_bus_relations *relations)
|
|
|
|
{
|
|
|
|
struct hv_dr_state *dr;
|
|
|
|
struct hv_dr_work *dr_wrk;
|
|
|
|
unsigned long flags;
|
2018-03-15 22:22:00 +08:00
|
|
|
bool pending_dr;
|
2016-02-17 05:56:23 +08:00
|
|
|
|
|
|
|
dr_wrk = kzalloc(sizeof(*dr_wrk), GFP_NOWAIT);
|
|
|
|
if (!dr_wrk)
|
|
|
|
return;
|
|
|
|
|
|
|
|
dr = kzalloc(offsetof(struct hv_dr_state, func) +
|
|
|
|
(sizeof(struct pci_function_description) *
|
|
|
|
(relations->device_count)), GFP_NOWAIT);
|
|
|
|
if (!dr) {
|
|
|
|
kfree(dr_wrk);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
INIT_WORK(&dr_wrk->wrk, pci_devices_present_work);
|
|
|
|
dr_wrk->bus = hbus;
|
|
|
|
dr->device_count = relations->device_count;
|
|
|
|
if (dr->device_count != 0) {
|
|
|
|
memcpy(dr->func, relations->func,
|
|
|
|
sizeof(struct pci_function_description) *
|
|
|
|
dr->device_count);
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_irqsave(&hbus->device_list_lock, flags);
|
2018-03-15 22:22:00 +08:00
|
|
|
/*
|
|
|
|
* If pending_dr is true, we have already queued a work,
|
|
|
|
* which will see the new dr. Otherwise, we need to
|
|
|
|
* queue a new work.
|
|
|
|
*/
|
|
|
|
pending_dr = !list_empty(&hbus->dr_list);
|
2016-02-17 05:56:23 +08:00
|
|
|
list_add_tail(&dr->list_entry, &hbus->dr_list);
|
|
|
|
spin_unlock_irqrestore(&hbus->device_list_lock, flags);
|
|
|
|
|
2018-03-15 22:22:00 +08:00
|
|
|
if (pending_dr) {
|
|
|
|
kfree(dr_wrk);
|
|
|
|
} else {
|
|
|
|
get_hvpcibus(hbus);
|
|
|
|
queue_work(hbus->wq, &dr_wrk->wrk);
|
|
|
|
}
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_eject_device_work() - Asynchronously handles ejection
|
|
|
|
* @work: Work struct embedded in internal device struct
|
|
|
|
*
|
|
|
|
* This function handles ejecting a device. Windows will
|
|
|
|
* attempt to gracefully eject a device, waiting 60 seconds to
|
|
|
|
* hear back from the guest OS that this completed successfully.
|
|
|
|
* If this timer expires, the device will be forcibly removed.
|
|
|
|
*/
|
|
|
|
static void hv_eject_device_work(struct work_struct *work)
|
|
|
|
{
|
|
|
|
struct pci_eject_response *ejct_pkt;
|
|
|
|
struct hv_pci_dev *hpdev;
|
|
|
|
struct pci_dev *pdev;
|
|
|
|
unsigned long flags;
|
|
|
|
int wslot;
|
|
|
|
struct {
|
|
|
|
struct pci_packet pkt;
|
2016-08-23 12:45:51 +08:00
|
|
|
u8 buffer[sizeof(struct pci_eject_response)];
|
2016-02-17 05:56:23 +08:00
|
|
|
} ctxt;
|
|
|
|
|
|
|
|
hpdev = container_of(work, struct hv_pci_dev, wrk);
|
|
|
|
|
2018-03-15 22:21:43 +08:00
|
|
|
WARN_ON(hpdev->state != hv_pcichild_ejecting);
|
2016-02-17 05:56:23 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Ejection can come before or after the PCI bus has been set up, so
|
|
|
|
* attempt to find it and tear down the bus state, if it exists. This
|
|
|
|
* must be done without constructs like pci_domain_nr(hbus->pci_bus)
|
|
|
|
* because hbus->pci_bus may not exist yet.
|
|
|
|
*/
|
|
|
|
wslot = wslot_to_devfn(hpdev->desc.win_slot.slot);
|
|
|
|
pdev = pci_get_domain_bus_and_slot(hpdev->hbus->sysdata.domain, 0,
|
|
|
|
wslot);
|
|
|
|
if (pdev) {
|
2017-03-24 05:58:32 +08:00
|
|
|
pci_lock_rescan_remove();
|
2016-02-17 05:56:23 +08:00
|
|
|
pci_stop_and_remove_bus_device(pdev);
|
|
|
|
pci_dev_put(pdev);
|
2017-03-24 05:58:32 +08:00
|
|
|
pci_unlock_rescan_remove();
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
|
2016-11-10 15:19:52 +08:00
|
|
|
spin_lock_irqsave(&hpdev->hbus->device_list_lock, flags);
|
|
|
|
list_del(&hpdev->list_entry);
|
|
|
|
spin_unlock_irqrestore(&hpdev->hbus->device_list_lock, flags);
|
|
|
|
|
2018-09-15 03:54:56 +08:00
|
|
|
if (hpdev->pci_slot)
|
|
|
|
pci_destroy_slot(hpdev->pci_slot);
|
|
|
|
|
2016-02-17 05:56:23 +08:00
|
|
|
memset(&ctxt, 0, sizeof(ctxt));
|
|
|
|
ejct_pkt = (struct pci_eject_response *)&ctxt.pkt.message;
|
2016-08-23 12:45:51 +08:00
|
|
|
ejct_pkt->message_type.type = PCI_EJECTION_COMPLETE;
|
2016-02-17 05:56:23 +08:00
|
|
|
ejct_pkt->wslot.slot = hpdev->desc.win_slot.slot;
|
|
|
|
vmbus_sendpacket(hpdev->hbus->hdev->channel, ejct_pkt,
|
|
|
|
sizeof(*ejct_pkt), (unsigned long)&ctxt.pkt,
|
|
|
|
VM_PKT_DATA_INBAND, 0);
|
|
|
|
|
2018-05-24 01:11:12 +08:00
|
|
|
put_pcichild(hpdev);
|
|
|
|
put_pcichild(hpdev);
|
2016-02-17 05:56:23 +08:00
|
|
|
put_hvpcibus(hpdev->hbus);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_pci_eject_device() - Handles device ejection
|
|
|
|
* @hpdev: Internal device tracking struct
|
|
|
|
*
|
|
|
|
* This function is invoked when an ejection packet arrives. It
|
|
|
|
* just schedules work so that we don't re-enter the packet
|
|
|
|
* delivery code handling the ejection.
|
|
|
|
*/
|
|
|
|
static void hv_pci_eject_device(struct hv_pci_dev *hpdev)
|
|
|
|
{
|
|
|
|
hpdev->state = hv_pcichild_ejecting;
|
2018-05-24 01:11:12 +08:00
|
|
|
get_pcichild(hpdev);
|
2016-02-17 05:56:23 +08:00
|
|
|
INIT_WORK(&hpdev->wrk, hv_eject_device_work);
|
|
|
|
get_hvpcibus(hpdev->hbus);
|
2018-03-15 22:20:53 +08:00
|
|
|
queue_work(hpdev->hbus->wq, &hpdev->wrk);
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_pci_onchannelcallback() - Handles incoming packets
|
|
|
|
* @context: Internal bus tracking struct
|
|
|
|
*
|
|
|
|
* This function is invoked whenever the host sends a packet to
|
|
|
|
* this channel (which is private to this root PCI bus).
|
|
|
|
*/
|
|
|
|
static void hv_pci_onchannelcallback(void *context)
|
|
|
|
{
|
|
|
|
const int packet_size = 0x100;
|
|
|
|
int ret;
|
|
|
|
struct hv_pcibus_device *hbus = context;
|
|
|
|
u32 bytes_recvd;
|
|
|
|
u64 req_id;
|
|
|
|
struct vmpacket_descriptor *desc;
|
|
|
|
unsigned char *buffer;
|
|
|
|
int bufferlen = packet_size;
|
|
|
|
struct pci_packet *comp_packet;
|
|
|
|
struct pci_response *response;
|
|
|
|
struct pci_incoming_message *new_message;
|
|
|
|
struct pci_bus_relations *bus_rel;
|
|
|
|
struct pci_dev_incoming *dev_message;
|
|
|
|
struct hv_pci_dev *hpdev;
|
|
|
|
|
|
|
|
buffer = kmalloc(bufferlen, GFP_ATOMIC);
|
|
|
|
if (!buffer)
|
|
|
|
return;
|
|
|
|
|
|
|
|
while (1) {
|
|
|
|
ret = vmbus_recvpacket_raw(hbus->hdev->channel, buffer,
|
|
|
|
bufferlen, &bytes_recvd, &req_id);
|
|
|
|
|
|
|
|
if (ret == -ENOBUFS) {
|
|
|
|
kfree(buffer);
|
|
|
|
/* Handle large packet */
|
|
|
|
bufferlen = bytes_recvd;
|
|
|
|
buffer = kmalloc(bytes_recvd, GFP_ATOMIC);
|
|
|
|
if (!buffer)
|
|
|
|
return;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2016-06-18 01:45:30 +08:00
|
|
|
/* Zero length indicates there are no more packets. */
|
|
|
|
if (ret || !bytes_recvd)
|
|
|
|
break;
|
|
|
|
|
2016-02-17 05:56:23 +08:00
|
|
|
/*
|
|
|
|
* All incoming packets must be at least as large as a
|
|
|
|
* response.
|
|
|
|
*/
|
2016-05-30 22:17:58 +08:00
|
|
|
if (bytes_recvd <= sizeof(struct pci_response))
|
2016-06-18 01:45:30 +08:00
|
|
|
continue;
|
2016-02-17 05:56:23 +08:00
|
|
|
desc = (struct vmpacket_descriptor *)buffer;
|
|
|
|
|
|
|
|
switch (desc->type) {
|
|
|
|
case VM_PKT_COMP:
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The host is trusted, and thus it's safe to interpret
|
|
|
|
* this transaction ID as a pointer.
|
|
|
|
*/
|
|
|
|
comp_packet = (struct pci_packet *)req_id;
|
|
|
|
response = (struct pci_response *)buffer;
|
|
|
|
comp_packet->completion_func(comp_packet->compl_ctxt,
|
|
|
|
response,
|
|
|
|
bytes_recvd);
|
2016-05-30 22:17:58 +08:00
|
|
|
break;
|
2016-02-17 05:56:23 +08:00
|
|
|
|
|
|
|
case VM_PKT_DATA_INBAND:
|
|
|
|
|
|
|
|
new_message = (struct pci_incoming_message *)buffer;
|
2016-08-23 12:45:51 +08:00
|
|
|
switch (new_message->message_type.type) {
|
2016-02-17 05:56:23 +08:00
|
|
|
case PCI_BUS_RELATIONS:
|
|
|
|
|
|
|
|
bus_rel = (struct pci_bus_relations *)buffer;
|
|
|
|
if (bytes_recvd <
|
|
|
|
offsetof(struct pci_bus_relations, func) +
|
|
|
|
(sizeof(struct pci_function_description) *
|
|
|
|
(bus_rel->device_count))) {
|
|
|
|
dev_err(&hbus->hdev->device,
|
|
|
|
"bus relations too small\n");
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
hv_pci_devices_present(hbus, bus_rel);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case PCI_EJECT:
|
|
|
|
|
|
|
|
dev_message = (struct pci_dev_incoming *)buffer;
|
|
|
|
hpdev = get_pcichild_wslot(hbus,
|
|
|
|
dev_message->wslot.slot);
|
|
|
|
if (hpdev) {
|
|
|
|
hv_pci_eject_device(hpdev);
|
2018-05-24 01:11:12 +08:00
|
|
|
put_pcichild(hpdev);
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
dev_warn(&hbus->hdev->device,
|
|
|
|
"Unimplemented protocol message %x\n",
|
2016-08-23 12:45:51 +08:00
|
|
|
new_message->message_type.type);
|
2016-02-17 05:56:23 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
dev_err(&hbus->hdev->device,
|
|
|
|
"unhandled packet type %d, tid %llx len %d\n",
|
|
|
|
desc->type, req_id, bytes_recvd);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
2016-05-30 22:17:58 +08:00
|
|
|
|
|
|
|
kfree(buffer);
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_pci_protocol_negotiation() - Set up protocol
|
|
|
|
* @hdev: VMBus's tracking struct for this root PCI bus
|
|
|
|
*
|
|
|
|
* This driver is intended to support running on Windows 10
|
|
|
|
* (server) and later versions. It will not run on earlier
|
|
|
|
* versions, as they assume that many of the operations which
|
|
|
|
* Linux needs accomplished with a spinlock held were done via
|
|
|
|
* asynchronous messaging via VMBus. Windows 10 increases the
|
|
|
|
* surface area of PCI emulation so that these actions can take
|
|
|
|
* place by suspending a virtual processor for their duration.
|
|
|
|
*
|
|
|
|
* This function negotiates the channel protocol version,
|
|
|
|
* failing if the host doesn't support the necessary protocol
|
|
|
|
* level.
|
|
|
|
*/
|
|
|
|
static int hv_pci_protocol_negotiation(struct hv_device *hdev)
|
|
|
|
{
|
|
|
|
struct pci_version_request *version_req;
|
|
|
|
struct hv_pci_compl comp_pkt;
|
|
|
|
struct pci_packet *pkt;
|
|
|
|
int ret;
|
2017-05-25 04:41:27 +08:00
|
|
|
int i;
|
2016-02-17 05:56:23 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Initiate the handshake with the host and negotiate
|
|
|
|
* a version that the host can support. We start with the
|
|
|
|
* highest version number and go down if the host cannot
|
|
|
|
* support it.
|
|
|
|
*/
|
|
|
|
pkt = kzalloc(sizeof(*pkt) + sizeof(*version_req), GFP_KERNEL);
|
|
|
|
if (!pkt)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
init_completion(&comp_pkt.host_event);
|
|
|
|
pkt->completion_func = hv_pci_generic_compl;
|
|
|
|
pkt->compl_ctxt = &comp_pkt;
|
|
|
|
version_req = (struct pci_version_request *)&pkt->message;
|
2016-08-23 12:45:51 +08:00
|
|
|
version_req->message_type.type = PCI_QUERY_PROTOCOL_VERSION;
|
2016-02-17 05:56:23 +08:00
|
|
|
|
2017-05-25 04:41:27 +08:00
|
|
|
for (i = 0; i < ARRAY_SIZE(pci_protocol_versions); i++) {
|
|
|
|
version_req->protocol_version = pci_protocol_versions[i];
|
|
|
|
ret = vmbus_sendpacket(hdev->channel, version_req,
|
|
|
|
sizeof(struct pci_version_request),
|
|
|
|
(unsigned long)pkt, VM_PKT_DATA_INBAND,
|
|
|
|
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
|
2018-05-24 05:12:01 +08:00
|
|
|
if (!ret)
|
|
|
|
ret = wait_for_response(hdev, &comp_pkt.host_event);
|
|
|
|
|
2017-05-25 04:41:27 +08:00
|
|
|
if (ret) {
|
|
|
|
dev_err(&hdev->device,
|
2018-05-24 05:12:01 +08:00
|
|
|
"PCI Pass-through VSP failed to request version: %d",
|
2017-05-25 04:41:27 +08:00
|
|
|
ret);
|
|
|
|
goto exit;
|
|
|
|
}
|
2016-02-17 05:56:23 +08:00
|
|
|
|
2017-05-25 04:41:27 +08:00
|
|
|
if (comp_pkt.completion_status >= 0) {
|
|
|
|
pci_protocol_version = pci_protocol_versions[i];
|
|
|
|
dev_info(&hdev->device,
|
|
|
|
"PCI VMBus probing: Using version %#x\n",
|
|
|
|
pci_protocol_version);
|
|
|
|
goto exit;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (comp_pkt.completion_status != STATUS_REVISION_MISMATCH) {
|
|
|
|
dev_err(&hdev->device,
|
|
|
|
"PCI Pass-through VSP failed version request: %#x",
|
|
|
|
comp_pkt.completion_status);
|
|
|
|
ret = -EPROTO;
|
|
|
|
goto exit;
|
|
|
|
}
|
2016-02-17 05:56:23 +08:00
|
|
|
|
2017-05-25 04:41:27 +08:00
|
|
|
reinit_completion(&comp_pkt.host_event);
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
|
2017-05-25 04:41:27 +08:00
|
|
|
dev_err(&hdev->device,
|
|
|
|
"PCI pass-through VSP failed to find supported version");
|
|
|
|
ret = -EPROTO;
|
2016-02-17 05:56:23 +08:00
|
|
|
|
|
|
|
exit:
|
|
|
|
kfree(pkt);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_pci_free_bridge_windows() - Release memory regions for the
|
|
|
|
* bus
|
|
|
|
* @hbus: Root PCI bus, as understood by this driver
|
|
|
|
*/
|
|
|
|
static void hv_pci_free_bridge_windows(struct hv_pcibus_device *hbus)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* Set the resources back to the way they looked when they
|
|
|
|
* were allocated by setting IORESOURCE_BUSY again.
|
|
|
|
*/
|
|
|
|
|
|
|
|
if (hbus->low_mmio_space && hbus->low_mmio_res) {
|
|
|
|
hbus->low_mmio_res->flags |= IORESOURCE_BUSY;
|
2016-04-06 01:22:52 +08:00
|
|
|
vmbus_free_mmio(hbus->low_mmio_res->start,
|
|
|
|
resource_size(hbus->low_mmio_res));
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
if (hbus->high_mmio_space && hbus->high_mmio_res) {
|
|
|
|
hbus->high_mmio_res->flags |= IORESOURCE_BUSY;
|
2016-04-06 01:22:52 +08:00
|
|
|
vmbus_free_mmio(hbus->high_mmio_res->start,
|
|
|
|
resource_size(hbus->high_mmio_res));
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_pci_allocate_bridge_windows() - Allocate memory regions
|
|
|
|
* for the bus
|
|
|
|
* @hbus: Root PCI bus, as understood by this driver
|
|
|
|
*
|
|
|
|
* This function calls vmbus_allocate_mmio(), which is itself a
|
|
|
|
* bit of a compromise. Ideally, we might change the pnp layer
|
|
|
|
* in the kernel such that it comprehends either PCI devices
|
|
|
|
* which are "grandchildren of ACPI," with some intermediate bus
|
|
|
|
* node (in this case, VMBus) or change it such that it
|
|
|
|
* understands VMBus. The pnp layer, however, has been declared
|
|
|
|
* deprecated, and not subject to change.
|
|
|
|
*
|
|
|
|
* The workaround, implemented here, is to ask VMBus to allocate
|
|
|
|
* MMIO space for this bus. VMBus itself knows which ranges are
|
|
|
|
* appropriate by looking at its own ACPI objects. Then, after
|
|
|
|
* these ranges are claimed, they're modified to look like they
|
|
|
|
* would have looked if the ACPI and pnp code had allocated
|
|
|
|
* bridge windows. These descriptors have to exist in this form
|
|
|
|
* in order to satisfy the code which will get invoked when the
|
|
|
|
* endpoint PCI function driver calls request_mem_region() or
|
|
|
|
* request_mem_region_exclusive().
|
|
|
|
*
|
|
|
|
* Return: 0 on success, -errno on failure
|
|
|
|
*/
|
|
|
|
static int hv_pci_allocate_bridge_windows(struct hv_pcibus_device *hbus)
|
|
|
|
{
|
|
|
|
resource_size_t align;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (hbus->low_mmio_space) {
|
|
|
|
align = 1ULL << (63 - __builtin_clzll(hbus->low_mmio_space));
|
|
|
|
ret = vmbus_allocate_mmio(&hbus->low_mmio_res, hbus->hdev, 0,
|
|
|
|
(u64)(u32)0xffffffff,
|
|
|
|
hbus->low_mmio_space,
|
|
|
|
align, false);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&hbus->hdev->device,
|
|
|
|
"Need %#llx of low MMIO space. Consider reconfiguring the VM.\n",
|
|
|
|
hbus->low_mmio_space);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Modify this resource to become a bridge window. */
|
|
|
|
hbus->low_mmio_res->flags |= IORESOURCE_WINDOW;
|
|
|
|
hbus->low_mmio_res->flags &= ~IORESOURCE_BUSY;
|
|
|
|
pci_add_resource(&hbus->resources_for_children,
|
|
|
|
hbus->low_mmio_res);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (hbus->high_mmio_space) {
|
|
|
|
align = 1ULL << (63 - __builtin_clzll(hbus->high_mmio_space));
|
|
|
|
ret = vmbus_allocate_mmio(&hbus->high_mmio_res, hbus->hdev,
|
|
|
|
0x100000000, -1,
|
|
|
|
hbus->high_mmio_space, align,
|
|
|
|
false);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&hbus->hdev->device,
|
|
|
|
"Need %#llx of high MMIO space. Consider reconfiguring the VM.\n",
|
|
|
|
hbus->high_mmio_space);
|
|
|
|
goto release_low_mmio;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Modify this resource to become a bridge window. */
|
|
|
|
hbus->high_mmio_res->flags |= IORESOURCE_WINDOW;
|
|
|
|
hbus->high_mmio_res->flags &= ~IORESOURCE_BUSY;
|
|
|
|
pci_add_resource(&hbus->resources_for_children,
|
|
|
|
hbus->high_mmio_res);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
release_low_mmio:
|
|
|
|
if (hbus->low_mmio_res) {
|
2016-04-06 01:22:52 +08:00
|
|
|
vmbus_free_mmio(hbus->low_mmio_res->start,
|
|
|
|
resource_size(hbus->low_mmio_res));
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_allocate_config_window() - Find MMIO space for PCI Config
|
|
|
|
* @hbus: Root PCI bus, as understood by this driver
|
|
|
|
*
|
|
|
|
* This function claims memory-mapped I/O space for accessing
|
|
|
|
* configuration space for the functions on this bus.
|
|
|
|
*
|
|
|
|
* Return: 0 on success, -errno on failure
|
|
|
|
*/
|
|
|
|
static int hv_allocate_config_window(struct hv_pcibus_device *hbus)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set up a region of MMIO space to use for accessing configuration
|
|
|
|
* space.
|
|
|
|
*/
|
|
|
|
ret = vmbus_allocate_mmio(&hbus->mem_config, hbus->hdev, 0, -1,
|
|
|
|
PCI_CONFIG_MMIO_LENGTH, 0x1000, false);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* vmbus_allocate_mmio() gets used for allocating both device endpoint
|
|
|
|
* resource claims (those which cannot be overlapped) and the ranges
|
|
|
|
* which are valid for the children of this bus, which are intended
|
|
|
|
* to be overlapped by those children. Set the flag on this claim
|
|
|
|
* meaning that this region can't be overlapped.
|
|
|
|
*/
|
|
|
|
|
|
|
|
hbus->mem_config->flags |= IORESOURCE_BUSY;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void hv_free_config_window(struct hv_pcibus_device *hbus)
|
|
|
|
{
|
2016-04-06 01:22:52 +08:00
|
|
|
vmbus_free_mmio(hbus->mem_config->start, PCI_CONFIG_MMIO_LENGTH);
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_pci_enter_d0() - Bring the "bus" into the D0 power state
|
|
|
|
* @hdev: VMBus's tracking struct for this root PCI bus
|
|
|
|
*
|
|
|
|
* Return: 0 on success, -errno on failure
|
|
|
|
*/
|
|
|
|
static int hv_pci_enter_d0(struct hv_device *hdev)
|
|
|
|
{
|
|
|
|
struct hv_pcibus_device *hbus = hv_get_drvdata(hdev);
|
|
|
|
struct pci_bus_d0_entry *d0_entry;
|
|
|
|
struct hv_pci_compl comp_pkt;
|
|
|
|
struct pci_packet *pkt;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Tell the host that the bus is ready to use, and moved into the
|
|
|
|
* powered-on state. This includes telling the host which region
|
|
|
|
* of memory-mapped I/O space has been chosen for configuration space
|
|
|
|
* access.
|
|
|
|
*/
|
|
|
|
pkt = kzalloc(sizeof(*pkt) + sizeof(*d0_entry), GFP_KERNEL);
|
|
|
|
if (!pkt)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
init_completion(&comp_pkt.host_event);
|
|
|
|
pkt->completion_func = hv_pci_generic_compl;
|
|
|
|
pkt->compl_ctxt = &comp_pkt;
|
|
|
|
d0_entry = (struct pci_bus_d0_entry *)&pkt->message;
|
2016-08-23 12:45:51 +08:00
|
|
|
d0_entry->message_type.type = PCI_BUS_D0ENTRY;
|
2016-02-17 05:56:23 +08:00
|
|
|
d0_entry->mmio_base = hbus->mem_config->start;
|
|
|
|
|
|
|
|
ret = vmbus_sendpacket(hdev->channel, d0_entry, sizeof(*d0_entry),
|
|
|
|
(unsigned long)pkt, VM_PKT_DATA_INBAND,
|
|
|
|
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
|
2018-05-24 05:12:01 +08:00
|
|
|
if (!ret)
|
|
|
|
ret = wait_for_response(hdev, &comp_pkt.host_event);
|
|
|
|
|
2016-02-17 05:56:23 +08:00
|
|
|
if (ret)
|
|
|
|
goto exit;
|
|
|
|
|
|
|
|
if (comp_pkt.completion_status < 0) {
|
|
|
|
dev_err(&hdev->device,
|
|
|
|
"PCI Pass-through VSP failed D0 Entry with status %x\n",
|
|
|
|
comp_pkt.completion_status);
|
|
|
|
ret = -EPROTO;
|
|
|
|
goto exit;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = 0;
|
|
|
|
|
|
|
|
exit:
|
|
|
|
kfree(pkt);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_pci_query_relations() - Ask host to send list of child
|
|
|
|
* devices
|
|
|
|
* @hdev: VMBus's tracking struct for this root PCI bus
|
|
|
|
*
|
|
|
|
* Return: 0 on success, -errno on failure
|
|
|
|
*/
|
|
|
|
static int hv_pci_query_relations(struct hv_device *hdev)
|
|
|
|
{
|
|
|
|
struct hv_pcibus_device *hbus = hv_get_drvdata(hdev);
|
|
|
|
struct pci_message message;
|
|
|
|
struct completion comp;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* Ask the host to send along the list of child devices */
|
|
|
|
init_completion(&comp);
|
|
|
|
if (cmpxchg(&hbus->survey_event, NULL, &comp))
|
|
|
|
return -ENOTEMPTY;
|
|
|
|
|
|
|
|
memset(&message, 0, sizeof(message));
|
2016-08-23 12:45:51 +08:00
|
|
|
message.type = PCI_QUERY_BUS_RELATIONS;
|
2016-02-17 05:56:23 +08:00
|
|
|
|
|
|
|
ret = vmbus_sendpacket(hdev->channel, &message, sizeof(message),
|
|
|
|
0, VM_PKT_DATA_INBAND, 0);
|
2018-05-24 05:12:01 +08:00
|
|
|
if (!ret)
|
|
|
|
ret = wait_for_response(hdev, &comp);
|
2016-02-17 05:56:23 +08:00
|
|
|
|
2018-05-24 05:12:01 +08:00
|
|
|
return ret;
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_send_resources_allocated() - Report local resource choices
|
|
|
|
* @hdev: VMBus's tracking struct for this root PCI bus
|
|
|
|
*
|
|
|
|
* The host OS is expecting to be sent a request as a message
|
|
|
|
* which contains all the resources that the device will use.
|
|
|
|
* The response contains those same resources, "translated"
|
|
|
|
* which is to say, the values which should be used by the
|
|
|
|
* hardware, when it delivers an interrupt. (MMIO resources are
|
|
|
|
* used in local terms.) This is nice for Windows, and lines up
|
|
|
|
* with the FDO/PDO split, which doesn't exist in Linux. Linux
|
|
|
|
* is deeply expecting to scan an emulated PCI configuration
|
|
|
|
* space. So this message is sent here only to drive the state
|
|
|
|
* machine on the host forward.
|
|
|
|
*
|
|
|
|
* Return: 0 on success, -errno on failure
|
|
|
|
*/
|
|
|
|
static int hv_send_resources_allocated(struct hv_device *hdev)
|
|
|
|
{
|
|
|
|
struct hv_pcibus_device *hbus = hv_get_drvdata(hdev);
|
|
|
|
struct pci_resources_assigned *res_assigned;
|
2017-05-25 04:41:28 +08:00
|
|
|
struct pci_resources_assigned2 *res_assigned2;
|
2016-02-17 05:56:23 +08:00
|
|
|
struct hv_pci_compl comp_pkt;
|
|
|
|
struct hv_pci_dev *hpdev;
|
|
|
|
struct pci_packet *pkt;
|
2017-05-25 04:41:28 +08:00
|
|
|
size_t size_res;
|
2016-02-17 05:56:23 +08:00
|
|
|
u32 wslot;
|
|
|
|
int ret;
|
|
|
|
|
2017-05-25 04:41:28 +08:00
|
|
|
size_res = (pci_protocol_version < PCI_PROTOCOL_VERSION_1_2)
|
|
|
|
? sizeof(*res_assigned) : sizeof(*res_assigned2);
|
|
|
|
|
|
|
|
pkt = kmalloc(sizeof(*pkt) + size_res, GFP_KERNEL);
|
2016-02-17 05:56:23 +08:00
|
|
|
if (!pkt)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
ret = 0;
|
|
|
|
|
|
|
|
for (wslot = 0; wslot < 256; wslot++) {
|
|
|
|
hpdev = get_pcichild_wslot(hbus, wslot);
|
|
|
|
if (!hpdev)
|
|
|
|
continue;
|
|
|
|
|
2017-05-25 04:41:28 +08:00
|
|
|
memset(pkt, 0, sizeof(*pkt) + size_res);
|
2016-02-17 05:56:23 +08:00
|
|
|
init_completion(&comp_pkt.host_event);
|
|
|
|
pkt->completion_func = hv_pci_generic_compl;
|
|
|
|
pkt->compl_ctxt = &comp_pkt;
|
|
|
|
|
2017-05-25 04:41:28 +08:00
|
|
|
if (pci_protocol_version < PCI_PROTOCOL_VERSION_1_2) {
|
|
|
|
res_assigned =
|
|
|
|
(struct pci_resources_assigned *)&pkt->message;
|
|
|
|
res_assigned->message_type.type =
|
|
|
|
PCI_RESOURCES_ASSIGNED;
|
|
|
|
res_assigned->wslot.slot = hpdev->desc.win_slot.slot;
|
|
|
|
} else {
|
|
|
|
res_assigned2 =
|
|
|
|
(struct pci_resources_assigned2 *)&pkt->message;
|
|
|
|
res_assigned2->message_type.type =
|
|
|
|
PCI_RESOURCES_ASSIGNED2;
|
|
|
|
res_assigned2->wslot.slot = hpdev->desc.win_slot.slot;
|
|
|
|
}
|
2018-05-24 01:11:12 +08:00
|
|
|
put_pcichild(hpdev);
|
2016-02-17 05:56:23 +08:00
|
|
|
|
2017-05-25 04:41:28 +08:00
|
|
|
ret = vmbus_sendpacket(hdev->channel, &pkt->message,
|
|
|
|
size_res, (unsigned long)pkt,
|
|
|
|
VM_PKT_DATA_INBAND,
|
|
|
|
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
|
2018-05-24 05:12:01 +08:00
|
|
|
if (!ret)
|
|
|
|
ret = wait_for_response(hdev, &comp_pkt.host_event);
|
2016-02-17 05:56:23 +08:00
|
|
|
if (ret)
|
|
|
|
break;
|
|
|
|
|
|
|
|
if (comp_pkt.completion_status < 0) {
|
|
|
|
ret = -EPROTO;
|
|
|
|
dev_err(&hdev->device,
|
|
|
|
"resource allocated returned 0x%x",
|
|
|
|
comp_pkt.completion_status);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
kfree(pkt);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_send_resources_released() - Report local resources
|
|
|
|
* released
|
|
|
|
* @hdev: VMBus's tracking struct for this root PCI bus
|
|
|
|
*
|
|
|
|
* Return: 0 on success, -errno on failure
|
|
|
|
*/
|
|
|
|
static int hv_send_resources_released(struct hv_device *hdev)
|
|
|
|
{
|
|
|
|
struct hv_pcibus_device *hbus = hv_get_drvdata(hdev);
|
|
|
|
struct pci_child_message pkt;
|
|
|
|
struct hv_pci_dev *hpdev;
|
|
|
|
u32 wslot;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
for (wslot = 0; wslot < 256; wslot++) {
|
|
|
|
hpdev = get_pcichild_wslot(hbus, wslot);
|
|
|
|
if (!hpdev)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
memset(&pkt, 0, sizeof(pkt));
|
2016-08-23 12:45:51 +08:00
|
|
|
pkt.message_type.type = PCI_RESOURCES_RELEASED;
|
2016-02-17 05:56:23 +08:00
|
|
|
pkt.wslot.slot = hpdev->desc.win_slot.slot;
|
|
|
|
|
2018-05-24 01:11:12 +08:00
|
|
|
put_pcichild(hpdev);
|
2016-02-17 05:56:23 +08:00
|
|
|
|
|
|
|
ret = vmbus_sendpacket(hdev->channel, &pkt, sizeof(pkt), 0,
|
|
|
|
VM_PKT_DATA_INBAND, 0);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void get_hvpcibus(struct hv_pcibus_device *hbus)
|
|
|
|
{
|
2018-05-24 01:11:13 +08:00
|
|
|
refcount_inc(&hbus->remove_lock);
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void put_hvpcibus(struct hv_pcibus_device *hbus)
|
|
|
|
{
|
2018-05-24 01:11:13 +08:00
|
|
|
if (refcount_dec_and_test(&hbus->remove_lock))
|
2016-02-17 05:56:23 +08:00
|
|
|
complete(&hbus->remove_event);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_pci_probe() - New VMBus channel probe, for a root PCI bus
|
|
|
|
* @hdev: VMBus's tracking struct for this root PCI bus
|
|
|
|
* @dev_id: Identifies the device itself
|
|
|
|
*
|
|
|
|
* Return: 0 on success, -errno on failure
|
|
|
|
*/
|
|
|
|
static int hv_pci_probe(struct hv_device *hdev,
|
|
|
|
const struct hv_vmbus_device_id *dev_id)
|
|
|
|
{
|
|
|
|
struct hv_pcibus_device *hbus;
|
|
|
|
int ret;
|
|
|
|
|
2017-05-25 04:41:25 +08:00
|
|
|
/*
|
|
|
|
* hv_pcibus_device contains the hypercall arguments for retargeting in
|
|
|
|
* hv_irq_unmask(). Those must not cross a page boundary.
|
|
|
|
*/
|
|
|
|
BUILD_BUG_ON(sizeof(*hbus) > PAGE_SIZE);
|
|
|
|
|
|
|
|
hbus = (struct hv_pcibus_device *)get_zeroed_page(GFP_KERNEL);
|
2016-02-17 05:56:23 +08:00
|
|
|
if (!hbus)
|
|
|
|
return -ENOMEM;
|
2017-03-24 05:58:10 +08:00
|
|
|
hbus->state = hv_pcibus_init;
|
2016-02-17 05:56:23 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* The PCI bus "domain" is what is called "segment" in ACPI and
|
|
|
|
* other specs. Pull it from the instance ID, to get something
|
|
|
|
* unique. Bytes 8 and 9 are what is used in Windows guests, so
|
|
|
|
* do the same thing for consistency. Note that, since this code
|
|
|
|
* only runs in a Hyper-V VM, Hyper-V can (and does) guarantee
|
|
|
|
* that (1) the only domain in use for something that looks like
|
|
|
|
* a physical PCI bus (which is actually emulated by the
|
|
|
|
* hypervisor) is domain 0 and (2) there will be no overlap
|
|
|
|
* between domains derived from these instance IDs in the same
|
|
|
|
* VM.
|
|
|
|
*/
|
|
|
|
hbus->sysdata.domain = hdev->dev_instance.b[9] |
|
|
|
|
hdev->dev_instance.b[8] << 8;
|
|
|
|
|
|
|
|
hbus->hdev = hdev;
|
2018-05-24 01:11:13 +08:00
|
|
|
refcount_set(&hbus->remove_lock, 1);
|
2016-02-17 05:56:23 +08:00
|
|
|
INIT_LIST_HEAD(&hbus->children);
|
|
|
|
INIT_LIST_HEAD(&hbus->dr_list);
|
|
|
|
INIT_LIST_HEAD(&hbus->resources_for_children);
|
|
|
|
spin_lock_init(&hbus->config_lock);
|
|
|
|
spin_lock_init(&hbus->device_list_lock);
|
2016-11-09 06:04:38 +08:00
|
|
|
spin_lock_init(&hbus->retarget_msi_interrupt_lock);
|
2016-02-17 05:56:23 +08:00
|
|
|
init_completion(&hbus->remove_event);
|
2018-03-15 22:20:53 +08:00
|
|
|
hbus->wq = alloc_ordered_workqueue("hv_pci_%x", 0,
|
|
|
|
hbus->sysdata.domain);
|
|
|
|
if (!hbus->wq) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto free_bus;
|
|
|
|
}
|
2016-02-17 05:56:23 +08:00
|
|
|
|
|
|
|
ret = vmbus_open(hdev->channel, pci_ring_size, pci_ring_size, NULL, 0,
|
|
|
|
hv_pci_onchannelcallback, hbus);
|
|
|
|
if (ret)
|
2018-03-15 22:20:53 +08:00
|
|
|
goto destroy_wq;
|
2016-02-17 05:56:23 +08:00
|
|
|
|
|
|
|
hv_set_drvdata(hdev, hbus);
|
|
|
|
|
|
|
|
ret = hv_pci_protocol_negotiation(hdev);
|
|
|
|
if (ret)
|
|
|
|
goto close;
|
|
|
|
|
|
|
|
ret = hv_allocate_config_window(hbus);
|
|
|
|
if (ret)
|
|
|
|
goto close;
|
|
|
|
|
|
|
|
hbus->cfg_addr = ioremap(hbus->mem_config->start,
|
|
|
|
PCI_CONFIG_MMIO_LENGTH);
|
|
|
|
if (!hbus->cfg_addr) {
|
|
|
|
dev_err(&hdev->device,
|
|
|
|
"Unable to map a virtual address for config space\n");
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto free_config;
|
|
|
|
}
|
|
|
|
|
|
|
|
hbus->sysdata.fwnode = irq_domain_alloc_fwnode(hbus);
|
|
|
|
if (!hbus->sysdata.fwnode) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto unmap;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = hv_pcie_init_irq_domain(hbus);
|
|
|
|
if (ret)
|
|
|
|
goto free_fwnode;
|
|
|
|
|
|
|
|
ret = hv_pci_query_relations(hdev);
|
|
|
|
if (ret)
|
|
|
|
goto free_irq_domain;
|
|
|
|
|
|
|
|
ret = hv_pci_enter_d0(hdev);
|
|
|
|
if (ret)
|
|
|
|
goto free_irq_domain;
|
|
|
|
|
|
|
|
ret = hv_pci_allocate_bridge_windows(hbus);
|
|
|
|
if (ret)
|
|
|
|
goto free_irq_domain;
|
|
|
|
|
|
|
|
ret = hv_send_resources_allocated(hdev);
|
|
|
|
if (ret)
|
|
|
|
goto free_windows;
|
|
|
|
|
|
|
|
prepopulate_bars(hbus);
|
|
|
|
|
|
|
|
hbus->state = hv_pcibus_probed;
|
|
|
|
|
|
|
|
ret = create_root_hv_pci_bus(hbus);
|
|
|
|
if (ret)
|
|
|
|
goto free_windows;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
free_windows:
|
|
|
|
hv_pci_free_bridge_windows(hbus);
|
|
|
|
free_irq_domain:
|
|
|
|
irq_domain_remove(hbus->irq_domain);
|
|
|
|
free_fwnode:
|
|
|
|
irq_domain_free_fwnode(hbus->sysdata.fwnode);
|
|
|
|
unmap:
|
|
|
|
iounmap(hbus->cfg_addr);
|
|
|
|
free_config:
|
|
|
|
hv_free_config_window(hbus);
|
|
|
|
close:
|
|
|
|
vmbus_close(hdev->channel);
|
2018-03-15 22:20:53 +08:00
|
|
|
destroy_wq:
|
|
|
|
destroy_workqueue(hbus->wq);
|
2016-02-17 05:56:23 +08:00
|
|
|
free_bus:
|
2017-05-25 04:41:25 +08:00
|
|
|
free_page((unsigned long)hbus);
|
2016-02-17 05:56:23 +08:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2016-11-10 15:18:47 +08:00
|
|
|
static void hv_pci_bus_exit(struct hv_device *hdev)
|
2016-02-17 05:56:23 +08:00
|
|
|
{
|
2016-11-10 15:18:47 +08:00
|
|
|
struct hv_pcibus_device *hbus = hv_get_drvdata(hdev);
|
|
|
|
struct {
|
2016-02-17 05:56:23 +08:00
|
|
|
struct pci_packet teardown_packet;
|
2016-11-10 15:18:47 +08:00
|
|
|
u8 buffer[sizeof(struct pci_message)];
|
2016-02-17 05:56:23 +08:00
|
|
|
} pkt;
|
|
|
|
struct pci_bus_relations relations;
|
|
|
|
struct hv_pci_compl comp_pkt;
|
2016-11-10 15:18:47 +08:00
|
|
|
int ret;
|
2016-02-17 05:56:23 +08:00
|
|
|
|
2016-11-10 15:18:47 +08:00
|
|
|
/*
|
|
|
|
* After the host sends the RESCIND_CHANNEL message, it doesn't
|
|
|
|
* access the per-channel ringbuffer any longer.
|
|
|
|
*/
|
|
|
|
if (hdev->channel->rescind)
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* Delete any children which might still exist. */
|
|
|
|
memset(&relations, 0, sizeof(relations));
|
|
|
|
hv_pci_devices_present(hbus, &relations);
|
|
|
|
|
|
|
|
ret = hv_send_resources_released(hdev);
|
|
|
|
if (ret)
|
|
|
|
dev_err(&hdev->device,
|
|
|
|
"Couldn't send resources released packet(s)\n");
|
2016-02-17 05:56:23 +08:00
|
|
|
|
|
|
|
memset(&pkt.teardown_packet, 0, sizeof(pkt.teardown_packet));
|
|
|
|
init_completion(&comp_pkt.host_event);
|
|
|
|
pkt.teardown_packet.completion_func = hv_pci_generic_compl;
|
|
|
|
pkt.teardown_packet.compl_ctxt = &comp_pkt;
|
2016-08-23 12:45:51 +08:00
|
|
|
pkt.teardown_packet.message[0].type = PCI_BUS_D0EXIT;
|
2016-02-17 05:56:23 +08:00
|
|
|
|
|
|
|
ret = vmbus_sendpacket(hdev->channel, &pkt.teardown_packet.message,
|
|
|
|
sizeof(struct pci_message),
|
|
|
|
(unsigned long)&pkt.teardown_packet,
|
|
|
|
VM_PKT_DATA_INBAND,
|
|
|
|
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
|
|
|
|
if (!ret)
|
|
|
|
wait_for_completion_timeout(&comp_pkt.host_event, 10 * HZ);
|
2016-11-10 15:18:47 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* hv_pci_remove() - Remove routine for this VMBus channel
|
|
|
|
* @hdev: VMBus's tracking struct for this root PCI bus
|
|
|
|
*
|
|
|
|
* Return: 0 on success, -errno on failure
|
|
|
|
*/
|
|
|
|
static int hv_pci_remove(struct hv_device *hdev)
|
|
|
|
{
|
|
|
|
struct hv_pcibus_device *hbus;
|
2016-02-17 05:56:23 +08:00
|
|
|
|
2016-11-10 15:18:47 +08:00
|
|
|
hbus = hv_get_drvdata(hdev);
|
2016-02-17 05:56:23 +08:00
|
|
|
if (hbus->state == hv_pcibus_installed) {
|
|
|
|
/* Remove the bus from PCI's point of view. */
|
|
|
|
pci_lock_rescan_remove();
|
|
|
|
pci_stop_root_bus(hbus->pci_bus);
|
|
|
|
pci_remove_root_bus(hbus->pci_bus);
|
|
|
|
pci_unlock_rescan_remove();
|
2017-03-24 05:58:10 +08:00
|
|
|
hbus->state = hv_pcibus_removed;
|
2016-02-17 05:56:23 +08:00
|
|
|
}
|
|
|
|
|
2016-11-10 15:18:47 +08:00
|
|
|
hv_pci_bus_exit(hdev);
|
2016-04-29 17:39:10 +08:00
|
|
|
|
2016-02-17 05:56:23 +08:00
|
|
|
vmbus_close(hdev->channel);
|
|
|
|
|
|
|
|
iounmap(hbus->cfg_addr);
|
|
|
|
hv_free_config_window(hbus);
|
|
|
|
pci_free_resource_list(&hbus->resources_for_children);
|
|
|
|
hv_pci_free_bridge_windows(hbus);
|
|
|
|
irq_domain_remove(hbus->irq_domain);
|
|
|
|
irq_domain_free_fwnode(hbus->sysdata.fwnode);
|
|
|
|
put_hvpcibus(hbus);
|
|
|
|
wait_for_completion(&hbus->remove_event);
|
2018-03-15 22:20:53 +08:00
|
|
|
destroy_workqueue(hbus->wq);
|
2017-05-25 04:41:25 +08:00
|
|
|
free_page((unsigned long)hbus);
|
2016-02-17 05:56:23 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct hv_vmbus_device_id hv_pci_id_table[] = {
|
|
|
|
/* PCI Pass-through Class ID */
|
|
|
|
/* 44C4F61D-4444-4400-9D52-802E27EDE19F */
|
|
|
|
{ HV_PCIE_GUID, },
|
|
|
|
{ },
|
|
|
|
};
|
|
|
|
|
|
|
|
MODULE_DEVICE_TABLE(vmbus, hv_pci_id_table);
|
|
|
|
|
|
|
|
static struct hv_driver hv_pci_drv = {
|
|
|
|
.name = "hv_pci",
|
|
|
|
.id_table = hv_pci_id_table,
|
|
|
|
.probe = hv_pci_probe,
|
|
|
|
.remove = hv_pci_remove,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void __exit exit_hv_pci_drv(void)
|
|
|
|
{
|
|
|
|
vmbus_driver_unregister(&hv_pci_drv);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __init init_hv_pci_drv(void)
|
|
|
|
{
|
|
|
|
return vmbus_driver_register(&hv_pci_drv);
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(init_hv_pci_drv);
|
|
|
|
module_exit(exit_hv_pci_drv);
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("Hyper-V PCI");
|
|
|
|
MODULE_LICENSE("GPL v2");
|