linux/arch/arm/mach-tegra/pm.c

384 lines
8.1 KiB
C
Raw Normal View History

/*
* CPU complex suspend & resume functions for Tegra SoCs
*
* Copyright (c) 2009-2012, NVIDIA Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk/tegra.h>
#include <linux/cpumask.h>
#include <linux/cpu_pm.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/suspend.h>
#include <asm/cacheflush.h>
#include <asm/idmap.h>
#include <asm/proc-fns.h>
#include <asm/smp_plat.h>
#include <asm/suspend.h>
#include <asm/tlbflush.h>
#include "flowctrl.h"
#include "fuse.h"
#include "iomap.h"
#include "pmc.h"
#include "pm.h"
#include "reset.h"
#include "sleep.h"
#ifdef CONFIG_PM_SLEEP
static DEFINE_SPINLOCK(tegra_lp2_lock);
static u32 iram_save_size;
static void *iram_save_addr;
struct tegra_lp1_iram tegra_lp1_iram;
void (*tegra_tear_down_cpu)(void);
void (*tegra_sleep_core_finish)(unsigned long v2p);
static int (*tegra_sleep_func)(unsigned long v2p);
static void tegra_tear_down_cpu_init(void)
{
switch (tegra_chip_id) {
case TEGRA20:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
tegra_tear_down_cpu = tegra20_tear_down_cpu;
break;
case TEGRA30:
case TEGRA114:
case TEGRA124:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
tegra_tear_down_cpu = tegra30_tear_down_cpu;
break;
}
}
/*
* restore_cpu_complex
*
* restores cpu clock setting, clears flow controller
*
* Always called on CPU 0.
*/
static void restore_cpu_complex(void)
{
int cpu = smp_processor_id();
BUG_ON(cpu != 0);
#ifdef CONFIG_SMP
cpu = cpu_logical_map(cpu);
#endif
/* Restore the CPU clock settings */
tegra_cpu_clock_resume();
flowctrl_cpu_suspend_exit(cpu);
}
/*
* suspend_cpu_complex
*
* saves pll state for use by restart_plls, prepares flow controller for
* transition to suspend state
*
* Must always be called on cpu 0.
*/
static void suspend_cpu_complex(void)
{
int cpu = smp_processor_id();
BUG_ON(cpu != 0);
#ifdef CONFIG_SMP
cpu = cpu_logical_map(cpu);
#endif
/* Save the CPU clock settings */
tegra_cpu_clock_suspend();
flowctrl_cpu_suspend_enter(cpu);
}
void tegra_clear_cpu_in_lp2(void)
{
int phy_cpu_id = cpu_logical_map(smp_processor_id());
u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
spin_lock(&tegra_lp2_lock);
BUG_ON(!(*cpu_in_lp2 & BIT(phy_cpu_id)));
*cpu_in_lp2 &= ~BIT(phy_cpu_id);
spin_unlock(&tegra_lp2_lock);
}
bool tegra_set_cpu_in_lp2(void)
{
int phy_cpu_id = cpu_logical_map(smp_processor_id());
bool last_cpu = false;
cpumask_t *cpu_lp2_mask = tegra_cpu_lp2_mask;
u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
spin_lock(&tegra_lp2_lock);
BUG_ON((*cpu_in_lp2 & BIT(phy_cpu_id)));
*cpu_in_lp2 |= BIT(phy_cpu_id);
if ((phy_cpu_id == 0) && cpumask_equal(cpu_lp2_mask, cpu_online_mask))
last_cpu = true;
else if (tegra_chip_id == TEGRA20 && phy_cpu_id == 1)
tegra20_cpu_set_resettable_soon();
spin_unlock(&tegra_lp2_lock);
return last_cpu;
}
int tegra_cpu_do_idle(void)
{
return cpu_do_idle();
}
static int tegra_sleep_cpu(unsigned long v2p)
{
setup_mm_for_reboot();
tegra_sleep_cpu_finish(v2p);
/* should never here */
BUG();
return 0;
}
void tegra_idle_lp2_last(void)
{
tegra_pmc_pm_set(TEGRA_SUSPEND_LP2);
cpu_cluster_pm_enter();
suspend_cpu_complex();
cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
restore_cpu_complex();
cpu_cluster_pm_exit();
}
enum tegra_suspend_mode tegra_pm_validate_suspend_mode(
enum tegra_suspend_mode mode)
{
/*
* The Tegra devices support suspending to LP1 or lower currently.
*/
if (mode > TEGRA_SUSPEND_LP1)
return TEGRA_SUSPEND_LP1;
return mode;
}
static int tegra_sleep_core(unsigned long v2p)
{
setup_mm_for_reboot();
tegra_sleep_core_finish(v2p);
/* should never here */
BUG();
return 0;
}
/*
* tegra_lp1_iram_hook
*
* Hooking the address of LP1 reset vector and SDRAM self-refresh code in
* SDRAM. These codes not be copied to IRAM in this fuction. We need to
* copy these code to IRAM before LP0/LP1 suspend and restore the content
* of IRAM after resume.
*/
static bool tegra_lp1_iram_hook(void)
{
ARM: tegra: add LP1 suspend support for Tegra30 The LP1 suspend mode will power off the CPU, clock gated the PLLs and put SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The sequence when LP1 suspending: * tunning off L1 data cache and the MMU * storing some EMC registers, DPD (deep power down) status, clk source of mselect and SCLK burst policy * putting SDRAM into self-refresh * switching CPU to CLK_M (12MHz OSC) * tunning off PLLM, PLLP, PLLA, PLLC and PLLX * switching SCLK to CLK_S (32KHz OSC) * shutting off the CPU rail The sequence of LP1 resuming: * re-enabling PLLM, PLLP, PLLA, PLLC and PLLX * restoring the clk source of mselect and SCLK burst policy * setting up CCLK burst policy to PLLX * restoring DPD status and some EMC registers * resuming SDRAM to normal mode * jumping to the "tegra_resume" from PMC_SCRATCH41 Due to the SDRAM will be put into self-refresh mode, the low level procedures of LP1 suspending and resuming should be copied to TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before restoring the CPU context when resuming, the SDRAM needs to be switched back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy be restored, CCLK burst policy be set in PLLX. Then jumping to "tegra_resume" that was expected to be stored in PMC_SCRATCH41 to restore CPU context and back to kernel. Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 17:40:04 +08:00
switch (tegra_chip_id) {
case TEGRA20:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
tegra20_lp1_iram_hook();
break;
ARM: tegra: add LP1 suspend support for Tegra30 The LP1 suspend mode will power off the CPU, clock gated the PLLs and put SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The sequence when LP1 suspending: * tunning off L1 data cache and the MMU * storing some EMC registers, DPD (deep power down) status, clk source of mselect and SCLK burst policy * putting SDRAM into self-refresh * switching CPU to CLK_M (12MHz OSC) * tunning off PLLM, PLLP, PLLA, PLLC and PLLX * switching SCLK to CLK_S (32KHz OSC) * shutting off the CPU rail The sequence of LP1 resuming: * re-enabling PLLM, PLLP, PLLA, PLLC and PLLX * restoring the clk source of mselect and SCLK burst policy * setting up CCLK burst policy to PLLX * restoring DPD status and some EMC registers * resuming SDRAM to normal mode * jumping to the "tegra_resume" from PMC_SCRATCH41 Due to the SDRAM will be put into self-refresh mode, the low level procedures of LP1 suspending and resuming should be copied to TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before restoring the CPU context when resuming, the SDRAM needs to be switched back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy be restored, CCLK burst policy be set in PLLX. Then jumping to "tegra_resume" that was expected to be stored in PMC_SCRATCH41 to restore CPU context and back to kernel. Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 17:40:04 +08:00
case TEGRA30:
2013-08-12 17:40:06 +08:00
case TEGRA114:
case TEGRA124:
2013-08-12 17:40:06 +08:00
if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
ARM: tegra: add LP1 suspend support for Tegra30 The LP1 suspend mode will power off the CPU, clock gated the PLLs and put SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The sequence when LP1 suspending: * tunning off L1 data cache and the MMU * storing some EMC registers, DPD (deep power down) status, clk source of mselect and SCLK burst policy * putting SDRAM into self-refresh * switching CPU to CLK_M (12MHz OSC) * tunning off PLLM, PLLP, PLLA, PLLC and PLLX * switching SCLK to CLK_S (32KHz OSC) * shutting off the CPU rail The sequence of LP1 resuming: * re-enabling PLLM, PLLP, PLLA, PLLC and PLLX * restoring the clk source of mselect and SCLK burst policy * setting up CCLK burst policy to PLLX * restoring DPD status and some EMC registers * resuming SDRAM to normal mode * jumping to the "tegra_resume" from PMC_SCRATCH41 Due to the SDRAM will be put into self-refresh mode, the low level procedures of LP1 suspending and resuming should be copied to TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before restoring the CPU context when resuming, the SDRAM needs to be switched back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy be restored, CCLK burst policy be set in PLLX. Then jumping to "tegra_resume" that was expected to be stored in PMC_SCRATCH41 to restore CPU context and back to kernel. Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 17:40:04 +08:00
tegra30_lp1_iram_hook();
break;
default:
break;
}
if (!tegra_lp1_iram.start_addr || !tegra_lp1_iram.end_addr)
return false;
iram_save_size = tegra_lp1_iram.end_addr - tegra_lp1_iram.start_addr;
iram_save_addr = kmalloc(iram_save_size, GFP_KERNEL);
if (!iram_save_addr)
return false;
return true;
}
static bool tegra_sleep_core_init(void)
{
ARM: tegra: add LP1 suspend support for Tegra30 The LP1 suspend mode will power off the CPU, clock gated the PLLs and put SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The sequence when LP1 suspending: * tunning off L1 data cache and the MMU * storing some EMC registers, DPD (deep power down) status, clk source of mselect and SCLK burst policy * putting SDRAM into self-refresh * switching CPU to CLK_M (12MHz OSC) * tunning off PLLM, PLLP, PLLA, PLLC and PLLX * switching SCLK to CLK_S (32KHz OSC) * shutting off the CPU rail The sequence of LP1 resuming: * re-enabling PLLM, PLLP, PLLA, PLLC and PLLX * restoring the clk source of mselect and SCLK burst policy * setting up CCLK burst policy to PLLX * restoring DPD status and some EMC registers * resuming SDRAM to normal mode * jumping to the "tegra_resume" from PMC_SCRATCH41 Due to the SDRAM will be put into self-refresh mode, the low level procedures of LP1 suspending and resuming should be copied to TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before restoring the CPU context when resuming, the SDRAM needs to be switched back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy be restored, CCLK burst policy be set in PLLX. Then jumping to "tegra_resume" that was expected to be stored in PMC_SCRATCH41 to restore CPU context and back to kernel. Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 17:40:04 +08:00
switch (tegra_chip_id) {
case TEGRA20:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
tegra20_sleep_core_init();
break;
ARM: tegra: add LP1 suspend support for Tegra30 The LP1 suspend mode will power off the CPU, clock gated the PLLs and put SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The sequence when LP1 suspending: * tunning off L1 data cache and the MMU * storing some EMC registers, DPD (deep power down) status, clk source of mselect and SCLK burst policy * putting SDRAM into self-refresh * switching CPU to CLK_M (12MHz OSC) * tunning off PLLM, PLLP, PLLA, PLLC and PLLX * switching SCLK to CLK_S (32KHz OSC) * shutting off the CPU rail The sequence of LP1 resuming: * re-enabling PLLM, PLLP, PLLA, PLLC and PLLX * restoring the clk source of mselect and SCLK burst policy * setting up CCLK burst policy to PLLX * restoring DPD status and some EMC registers * resuming SDRAM to normal mode * jumping to the "tegra_resume" from PMC_SCRATCH41 Due to the SDRAM will be put into self-refresh mode, the low level procedures of LP1 suspending and resuming should be copied to TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before restoring the CPU context when resuming, the SDRAM needs to be switched back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy be restored, CCLK burst policy be set in PLLX. Then jumping to "tegra_resume" that was expected to be stored in PMC_SCRATCH41 to restore CPU context and back to kernel. Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 17:40:04 +08:00
case TEGRA30:
2013-08-12 17:40:06 +08:00
case TEGRA114:
case TEGRA124:
2013-08-12 17:40:06 +08:00
if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
ARM: tegra: add LP1 suspend support for Tegra30 The LP1 suspend mode will power off the CPU, clock gated the PLLs and put SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The sequence when LP1 suspending: * tunning off L1 data cache and the MMU * storing some EMC registers, DPD (deep power down) status, clk source of mselect and SCLK burst policy * putting SDRAM into self-refresh * switching CPU to CLK_M (12MHz OSC) * tunning off PLLM, PLLP, PLLA, PLLC and PLLX * switching SCLK to CLK_S (32KHz OSC) * shutting off the CPU rail The sequence of LP1 resuming: * re-enabling PLLM, PLLP, PLLA, PLLC and PLLX * restoring the clk source of mselect and SCLK burst policy * setting up CCLK burst policy to PLLX * restoring DPD status and some EMC registers * resuming SDRAM to normal mode * jumping to the "tegra_resume" from PMC_SCRATCH41 Due to the SDRAM will be put into self-refresh mode, the low level procedures of LP1 suspending and resuming should be copied to TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before restoring the CPU context when resuming, the SDRAM needs to be switched back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy be restored, CCLK burst policy be set in PLLX. Then jumping to "tegra_resume" that was expected to be stored in PMC_SCRATCH41 to restore CPU context and back to kernel. Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 17:40:04 +08:00
tegra30_sleep_core_init();
break;
default:
break;
}
if (!tegra_sleep_core_finish)
return false;
return true;
}
static void tegra_suspend_enter_lp1(void)
{
tegra_pmc_suspend();
/* copy the reset vector & SDRAM shutdown code into IRAM */
memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA),
iram_save_size);
memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA),
tegra_lp1_iram.start_addr, iram_save_size);
*((u32 *)tegra_cpu_lp1_mask) = 1;
}
static void tegra_suspend_exit_lp1(void)
{
tegra_pmc_resume();
/* restore IRAM */
memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), iram_save_addr,
iram_save_size);
*(u32 *)tegra_cpu_lp1_mask = 0;
}
static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = {
[TEGRA_SUSPEND_NONE] = "none",
[TEGRA_SUSPEND_LP2] = "LP2",
[TEGRA_SUSPEND_LP1] = "LP1",
[TEGRA_SUSPEND_LP0] = "LP0",
};
arm: delete __cpuinit/__CPUINIT usage from all ARM users The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the ARM uses of the __cpuinit macros from C code, and all __CPUINIT from assembly code. It also had two ".previous" section statements that were paired off against __CPUINIT (aka .section ".cpuinit.text") that also get removed here. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 03:43:14 +08:00
static int tegra_suspend_enter(suspend_state_t state)
{
enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode();
if (WARN_ON(mode < TEGRA_SUSPEND_NONE ||
mode >= TEGRA_MAX_SUSPEND_MODE))
return -EINVAL;
pr_info("Entering suspend state %s\n", lp_state[mode]);
tegra_pmc_pm_set(mode);
local_fiq_disable();
suspend_cpu_complex();
switch (mode) {
case TEGRA_SUSPEND_LP1:
tegra_suspend_enter_lp1();
break;
case TEGRA_SUSPEND_LP2:
tegra_set_cpu_in_lp2();
break;
default:
break;
}
cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, tegra_sleep_func);
switch (mode) {
case TEGRA_SUSPEND_LP1:
tegra_suspend_exit_lp1();
break;
case TEGRA_SUSPEND_LP2:
tegra_clear_cpu_in_lp2();
break;
default:
break;
}
restore_cpu_complex();
local_fiq_enable();
return 0;
}
static const struct platform_suspend_ops tegra_suspend_ops = {
.valid = suspend_valid_only_mem,
.enter = tegra_suspend_enter,
};
void __init tegra_init_suspend(void)
{
enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode();
if (mode == TEGRA_SUSPEND_NONE)
return;
tegra_tear_down_cpu_init();
tegra_pmc_suspend_init();
if (mode >= TEGRA_SUSPEND_LP1) {
if (!tegra_lp1_iram_hook() || !tegra_sleep_core_init()) {
pr_err("%s: unable to allocate memory for SDRAM"
"self-refresh -- LP0/LP1 unavailable\n",
__func__);
tegra_pmc_set_suspend_mode(TEGRA_SUSPEND_LP2);
mode = TEGRA_SUSPEND_LP2;
}
}
/* set up sleep function for cpu_suspend */
switch (mode) {
case TEGRA_SUSPEND_LP1:
tegra_sleep_func = tegra_sleep_core;
break;
case TEGRA_SUSPEND_LP2:
tegra_sleep_func = tegra_sleep_cpu;
break;
default:
break;
}
suspend_set_ops(&tegra_suspend_ops);
}
#endif