linux/drivers/video/mb862xx/mb862xxfb_accel.c

336 lines
8.3 KiB
C
Raw Normal View History

/*
* drivers/mb862xx/mb862xxfb_accel.c
*
* Fujitsu Carmine/Coral-P(A)/Lime framebuffer driver acceleration support
*
* (C) 2007 Alexander Shishkin <virtuoso@slind.org>
* (C) 2009 Valentin Sitdikov <v.sitdikov@gmail.com>
* (C) 2009 Siemens AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/fb.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/pci.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#if defined(CONFIG_OF)
#include <linux/of_platform.h>
#endif
#include "mb862xxfb.h"
#include "mb862xx_reg.h"
#include "mb862xxfb_accel.h"
static void mb862xxfb_write_fifo(u32 count, u32 *data, struct fb_info *info)
{
struct mb862xxfb_par *par = info->par;
static u32 free;
u32 total = 0;
while (total < count) {
if (free) {
outreg(geo, GDC_GEO_REG_INPUT_FIFO, data[total]);
total++;
free--;
} else {
free = (u32) inreg(draw, GDC_REG_FIFO_COUNT);
}
}
}
static void mb86290fb_copyarea(struct fb_info *info,
const struct fb_copyarea *area)
{
__u32 cmd[6];
cmd[0] = (GDC_TYPE_SETREGISTER << 24) | (1 << 16) | GDC_REG_MODE_BITMAP;
/* Set raster operation */
cmd[1] = (2 << 7) | (GDC_ROP_COPY << 9);
cmd[2] = GDC_TYPE_BLTCOPYP << 24;
if (area->sx >= area->dx && area->sy >= area->dy)
cmd[2] |= GDC_CMD_BLTCOPY_TOP_LEFT << 16;
else if (area->sx >= area->dx && area->sy <= area->dy)
cmd[2] |= GDC_CMD_BLTCOPY_BOTTOM_LEFT << 16;
else if (area->sx <= area->dx && area->sy >= area->dy)
cmd[2] |= GDC_CMD_BLTCOPY_TOP_RIGHT << 16;
else
cmd[2] |= GDC_CMD_BLTCOPY_BOTTOM_RIGHT << 16;
cmd[3] = (area->sy << 16) | area->sx;
cmd[4] = (area->dy << 16) | area->dx;
cmd[5] = (area->height << 16) | area->width;
mb862xxfb_write_fifo(6, cmd, info);
}
/*
* Fill in the cmd array /GDC FIFO commands/ to draw a 1bit image.
* Make sure cmd has enough room!
*/
static void mb86290fb_imageblit1(u32 *cmd, u16 step, u16 dx, u16 dy,
u16 width, u16 height, u32 fgcolor,
u32 bgcolor, const struct fb_image *image,
struct fb_info *info)
{
int i;
unsigned const char *line;
u16 bytes;
/* set colors and raster operation regs */
cmd[0] = (GDC_TYPE_SETREGISTER << 24) | (1 << 16) | GDC_REG_MODE_BITMAP;
/* Set raster operation */
cmd[1] = (2 << 7) | (GDC_ROP_COPY << 9);
cmd[2] =
(GDC_TYPE_SETCOLORREGISTER << 24) | (GDC_CMD_BODY_FORE_COLOR << 16);
cmd[3] = fgcolor;
cmd[4] =
(GDC_TYPE_SETCOLORREGISTER << 24) | (GDC_CMD_BODY_BACK_COLOR << 16);
cmd[5] = bgcolor;
i = 0;
line = image->data;
bytes = (image->width + 7) >> 3;
/* and the image */
cmd[6] = (GDC_TYPE_DRAWBITMAPP << 24) |
(GDC_CMD_BITMAP << 16) | (2 + (step * height));
cmd[7] = (dy << 16) | dx;
cmd[8] = (height << 16) | width;
while (i < height) {
memcpy(&cmd[9 + i * step], line, step << 2);
#ifdef __LITTLE_ENDIAN
{
int k = 0;
for (k = 0; k < step; k++)
cmd[9 + i * step + k] =
cpu_to_be32(cmd[9 + i * step + k]);
}
#endif
line += bytes;
i++;
}
}
/*
* Fill in the cmd array /GDC FIFO commands/ to draw a 8bit image.
* Make sure cmd has enough room!
*/
static void mb86290fb_imageblit8(u32 *cmd, u16 step, u16 dx, u16 dy,
u16 width, u16 height, u32 fgcolor,
u32 bgcolor, const struct fb_image *image,
struct fb_info *info)
{
int i, j;
unsigned const char *line, *ptr;
u16 bytes;
cmd[0] = (GDC_TYPE_DRAWBITMAPP << 24) |
(GDC_CMD_BLT_DRAW << 16) | (2 + (height * step));
cmd[1] = (dy << 16) | dx;
cmd[2] = (height << 16) | width;
i = 0;
line = ptr = image->data;
bytes = image->width;
while (i < height) {
ptr = line;
for (j = 0; j < step; j++) {
cmd[3 + i * step + j] =
(((u32 *) (info->pseudo_palette))[*ptr]) & 0xffff;
ptr++;
cmd[3 + i * step + j] |=
((((u32 *) (info->
pseudo_palette))[*ptr]) & 0xffff) << 16;
ptr++;
}
line += bytes;
i++;
}
}
/*
* Fill in the cmd array /GDC FIFO commands/ to draw a 16bit image.
* Make sure cmd has enough room!
*/
static void mb86290fb_imageblit16(u32 *cmd, u16 step, u16 dx, u16 dy,
u16 width, u16 height, u32 fgcolor,
u32 bgcolor, const struct fb_image *image,
struct fb_info *info)
{
int i;
unsigned const char *line;
u16 bytes;
i = 0;
line = image->data;
bytes = image->width << 1;
cmd[0] = (GDC_TYPE_DRAWBITMAPP << 24) |
(GDC_CMD_BLT_DRAW << 16) | (2 + step * height);
cmd[1] = (dy << 16) | dx;
cmd[2] = (height << 16) | width;
while (i < height) {
memcpy(&cmd[3 + i * step], line, step);
line += bytes;
i++;
}
}
static void mb86290fb_imageblit(struct fb_info *info,
const struct fb_image *image)
{
int mdr;
u32 *cmd = NULL;
void (*cmdfn) (u32 *, u16, u16, u16, u16, u16, u32, u32,
const struct fb_image *, struct fb_info *) = NULL;
u32 cmdlen;
u32 fgcolor = 0, bgcolor = 0;
u16 step;
u16 width = image->width, height = image->height;
u16 dx = image->dx, dy = image->dy;
int x2, y2, vxres, vyres;
mdr = (GDC_ROP_COPY << 9);
x2 = image->dx + image->width;
y2 = image->dy + image->height;
vxres = info->var.xres_virtual;
vyres = info->var.yres_virtual;
x2 = min(x2, vxres);
y2 = min(y2, vyres);
width = x2 - dx;
height = y2 - dy;
switch (image->depth) {
case 1:
step = (width + 31) >> 5;
cmdlen = 9 + height * step;
cmdfn = mb86290fb_imageblit1;
if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
fgcolor =
((u32 *) (info->pseudo_palette))[image->fg_color];
bgcolor =
((u32 *) (info->pseudo_palette))[image->bg_color];
} else {
fgcolor = image->fg_color;
bgcolor = image->bg_color;
}
break;
case 8:
step = (width + 1) >> 1;
cmdlen = 3 + height * step;
cmdfn = mb86290fb_imageblit8;
break;
case 16:
step = (width + 1) >> 1;
cmdlen = 3 + height * step;
cmdfn = mb86290fb_imageblit16;
break;
default:
cfb_imageblit(info, image);
return;
}
cmd = kmalloc(cmdlen * 4, GFP_DMA);
if (!cmd)
return cfb_imageblit(info, image);
cmdfn(cmd, step, dx, dy, width, height, fgcolor, bgcolor, image, info);
mb862xxfb_write_fifo(cmdlen, cmd, info);
kfree(cmd);
}
static void mb86290fb_fillrect(struct fb_info *info,
const struct fb_fillrect *rect)
{
u32 x2, y2, vxres, vyres, height, width, fg;
u32 cmd[7];
vxres = info->var.xres_virtual;
vyres = info->var.yres_virtual;
if (!rect->width || !rect->height || rect->dx > vxres
|| rect->dy > vyres)
return;
/* We could use hardware clipping but on many cards you get around
* hardware clipping by writing to framebuffer directly. */
x2 = rect->dx + rect->width;
y2 = rect->dy + rect->height;
x2 = min(x2, vxres);
y2 = min(y2, vyres);
width = x2 - rect->dx;
height = y2 - rect->dy;
if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
info->fix.visual == FB_VISUAL_DIRECTCOLOR)
fg = ((u32 *) (info->pseudo_palette))[rect->color];
else
fg = rect->color;
switch (rect->rop) {
case ROP_XOR:
/* Set raster operation */
cmd[1] = (2 << 7) | (GDC_ROP_XOR << 9);
break;
case ROP_COPY:
/* Set raster operation */
cmd[1] = (2 << 7) | (GDC_ROP_COPY << 9);
break;
}
cmd[0] = (GDC_TYPE_SETREGISTER << 24) | (1 << 16) | GDC_REG_MODE_BITMAP;
/* cmd[1] set earlier */
cmd[2] =
(GDC_TYPE_SETCOLORREGISTER << 24) | (GDC_CMD_BODY_FORE_COLOR << 16);
cmd[3] = fg;
cmd[4] = (GDC_TYPE_DRAWRECTP << 24) | (GDC_CMD_BLT_FILL << 16);
cmd[5] = (rect->dy << 16) | (rect->dx);
cmd[6] = (height << 16) | width;
mb862xxfb_write_fifo(7, cmd, info);
}
void mb862xxfb_init_accel(struct fb_info *info, int xres)
{
struct mb862xxfb_par *par = info->par;
if (info->var.bits_per_pixel == 32) {
info->fbops->fb_fillrect = cfb_fillrect;
info->fbops->fb_copyarea = cfb_copyarea;
info->fbops->fb_imageblit = cfb_imageblit;
} else {
outreg(disp, GC_L0EM, 3);
info->fbops->fb_fillrect = mb86290fb_fillrect;
info->fbops->fb_copyarea = mb86290fb_copyarea;
info->fbops->fb_imageblit = mb86290fb_imageblit;
}
outreg(draw, GDC_REG_DRAW_BASE, 0);
outreg(draw, GDC_REG_MODE_MISC, 0x8000);
outreg(draw, GDC_REG_X_RESOLUTION, xres);
info->flags |=
FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT |
FBINFO_HWACCEL_IMAGEBLIT;
info->fix.accel = 0xff; /*FIXME: add right define */
}
EXPORT_SYMBOL(mb862xxfb_init_accel);
MODULE_LICENSE("GPL v2");