openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/arm/mach-bcm/bcm_5301x.c

58 lines
1.3 KiB
C
Raw Normal View History

ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU This patch adds support for the BCM5301X/BCM470X SoCs with an ARM CPUs. Currently just booting to a shell is working and nothing else, no Ethernet, wifi, flash, ... I have some pending patches to make Ethernet work for this device. Mostly device tree support for bcma is missing. This SoC is used in small office and home router with Broadcom SoCs it's internal name is Northstar. This code should support the BCM4707, BCM4708, BCM4709, BCM53010, BCM53011 and BCM53012 SoC. It uses one or two ARM Cortex A9 Cores, some highlights are 2 PCIe 2.0 controllers, 4 Gigabit Ethernet MACs and a USB 3.0 host controller. This SoC uses a dual core CPU, but this is currently not implemented. More information about this SoC can be found here: http://www.anandtech.com/show/5925/broadcom-announces-bcm4708x-and-bcm5301x-socs-for-80211ac-routers Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-04 07:01:43 +08:00
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
*
* Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
#include <linux/of_platform.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
ARM: BCM5301X: workaround suppress fault Without this patch I am getting a unhandled fault exception like this one after "Freeing unused kernel memory": Freeing unused kernel memory: 1260K (c02c1000 - c03fc000) Unhandled fault: imprecise external abort (0x1c06) at 0xb6f89005 Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 The address which is here 0xb6f89005 changes from boot to boot, with a new build the changes are bigger. With kernel 3.10 I have also seen this fault at different places in the boot process, but starting with 3.11 they are always occurring after the "Freeing unused kernel memory" message. I never was able to completely boot to userspace without this handler. The abort code is constant 0x1c06. This fault just happens once in the boot process I have never seen it happing twice or more. I also tried changing the CPSR.A bit to 0 in init_early, with this code like Afzal suggested, but that did not change anything: asm volatile("mrs r12, cpsr\n" "bic r12, r12, #0x00000100\n" "msr cpsr_c, r12" ::: "r12", "cc", "memory"); Disabling the L2 cache by building with CONFIG_CACHE_L2X0 unset did not help. This workaround was copied from the vendor code including most of the comments. It says it they think this is caused by the CFE boot loader used on this device. I do not have any access to any datasheet or errata document to check this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-04 07:01:46 +08:00
#include <asm/siginfo.h>
#include <asm/signal.h>
ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU This patch adds support for the BCM5301X/BCM470X SoCs with an ARM CPUs. Currently just booting to a shell is working and nothing else, no Ethernet, wifi, flash, ... I have some pending patches to make Ethernet work for this device. Mostly device tree support for bcma is missing. This SoC is used in small office and home router with Broadcom SoCs it's internal name is Northstar. This code should support the BCM4707, BCM4708, BCM4709, BCM53010, BCM53011 and BCM53012 SoC. It uses one or two ARM Cortex A9 Cores, some highlights are 2 PCIe 2.0 controllers, 4 Gigabit Ethernet MACs and a USB 3.0 host controller. This SoC uses a dual core CPU, but this is currently not implemented. More information about this SoC can be found here: http://www.anandtech.com/show/5925/broadcom-announces-bcm4708x-and-bcm5301x-socs-for-80211ac-routers Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-04 07:01:43 +08:00
ARM: BCM5301X: workaround suppress fault Without this patch I am getting a unhandled fault exception like this one after "Freeing unused kernel memory": Freeing unused kernel memory: 1260K (c02c1000 - c03fc000) Unhandled fault: imprecise external abort (0x1c06) at 0xb6f89005 Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 The address which is here 0xb6f89005 changes from boot to boot, with a new build the changes are bigger. With kernel 3.10 I have also seen this fault at different places in the boot process, but starting with 3.11 they are always occurring after the "Freeing unused kernel memory" message. I never was able to completely boot to userspace without this handler. The abort code is constant 0x1c06. This fault just happens once in the boot process I have never seen it happing twice or more. I also tried changing the CPSR.A bit to 0 in init_early, with this code like Afzal suggested, but that did not change anything: asm volatile("mrs r12, cpsr\n" "bic r12, r12, #0x00000100\n" "msr cpsr_c, r12" ::: "r12", "cc", "memory"); Disabling the L2 cache by building with CONFIG_CACHE_L2X0 unset did not help. This workaround was copied from the vendor code including most of the comments. It says it they think this is caused by the CFE boot loader used on this device. I do not have any access to any datasheet or errata document to check this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-04 07:01:46 +08:00
static bool first_fault = true;
static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
ARM: BCM5301X: Ignore another (BCM4709 specific) fault code Broadcom ARM devices seem to generate some fault once per boot. We already have an ignoring handler for BCM4707/BCM4708, but BCM4709 generates different code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-02-11 23:40:58 +08:00
if ((fsr == 0x1406 || fsr == 0x1c06) && first_fault) {
ARM: BCM5301X: workaround suppress fault Without this patch I am getting a unhandled fault exception like this one after "Freeing unused kernel memory": Freeing unused kernel memory: 1260K (c02c1000 - c03fc000) Unhandled fault: imprecise external abort (0x1c06) at 0xb6f89005 Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 The address which is here 0xb6f89005 changes from boot to boot, with a new build the changes are bigger. With kernel 3.10 I have also seen this fault at different places in the boot process, but starting with 3.11 they are always occurring after the "Freeing unused kernel memory" message. I never was able to completely boot to userspace without this handler. The abort code is constant 0x1c06. This fault just happens once in the boot process I have never seen it happing twice or more. I also tried changing the CPSR.A bit to 0 in init_early, with this code like Afzal suggested, but that did not change anything: asm volatile("mrs r12, cpsr\n" "bic r12, r12, #0x00000100\n" "msr cpsr_c, r12" ::: "r12", "cc", "memory"); Disabling the L2 cache by building with CONFIG_CACHE_L2X0 unset did not help. This workaround was copied from the vendor code including most of the comments. It says it they think this is caused by the CFE boot loader used on this device. I do not have any access to any datasheet or errata document to check this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-04 07:01:46 +08:00
first_fault = false;
/*
ARM: BCM5301X: Ignore another (BCM4709 specific) fault code Broadcom ARM devices seem to generate some fault once per boot. We already have an ignoring handler for BCM4707/BCM4708, but BCM4709 generates different code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-02-11 23:40:58 +08:00
* These faults with codes 0x1406 (BCM4709) or 0x1c06 happens
* for no good reason, possibly left over from the CFE boot
* loader.
ARM: BCM5301X: workaround suppress fault Without this patch I am getting a unhandled fault exception like this one after "Freeing unused kernel memory": Freeing unused kernel memory: 1260K (c02c1000 - c03fc000) Unhandled fault: imprecise external abort (0x1c06) at 0xb6f89005 Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 The address which is here 0xb6f89005 changes from boot to boot, with a new build the changes are bigger. With kernel 3.10 I have also seen this fault at different places in the boot process, but starting with 3.11 they are always occurring after the "Freeing unused kernel memory" message. I never was able to completely boot to userspace without this handler. The abort code is constant 0x1c06. This fault just happens once in the boot process I have never seen it happing twice or more. I also tried changing the CPSR.A bit to 0 in init_early, with this code like Afzal suggested, but that did not change anything: asm volatile("mrs r12, cpsr\n" "bic r12, r12, #0x00000100\n" "msr cpsr_c, r12" ::: "r12", "cc", "memory"); Disabling the L2 cache by building with CONFIG_CACHE_L2X0 unset did not help. This workaround was copied from the vendor code including most of the comments. It says it they think this is caused by the CFE boot loader used on this device. I do not have any access to any datasheet or errata document to check this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-04 07:01:46 +08:00
*/
pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
ARM: BCM5301X: Ignore another (BCM4709 specific) fault code Broadcom ARM devices seem to generate some fault once per boot. We already have an ignoring handler for BCM4707/BCM4708, but BCM4709 generates different code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-02-11 23:40:58 +08:00
addr, fsr);
ARM: BCM5301X: workaround suppress fault Without this patch I am getting a unhandled fault exception like this one after "Freeing unused kernel memory": Freeing unused kernel memory: 1260K (c02c1000 - c03fc000) Unhandled fault: imprecise external abort (0x1c06) at 0xb6f89005 Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 The address which is here 0xb6f89005 changes from boot to boot, with a new build the changes are bigger. With kernel 3.10 I have also seen this fault at different places in the boot process, but starting with 3.11 they are always occurring after the "Freeing unused kernel memory" message. I never was able to completely boot to userspace without this handler. The abort code is constant 0x1c06. This fault just happens once in the boot process I have never seen it happing twice or more. I also tried changing the CPSR.A bit to 0 in init_early, with this code like Afzal suggested, but that did not change anything: asm volatile("mrs r12, cpsr\n" "bic r12, r12, #0x00000100\n" "msr cpsr_c, r12" ::: "r12", "cc", "memory"); Disabling the L2 cache by building with CONFIG_CACHE_L2X0 unset did not help. This workaround was copied from the vendor code including most of the comments. It says it they think this is caused by the CFE boot loader used on this device. I do not have any access to any datasheet or errata document to check this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-04 07:01:46 +08:00
/* Returning non-zero causes fault display and panic */
return 0;
}
/* Others should cause a fault */
return 1;
}
static void __init bcm5301x_init_early(void)
{
/* Install our hook */
hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR,
"imprecise external abort");
}
ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU This patch adds support for the BCM5301X/BCM470X SoCs with an ARM CPUs. Currently just booting to a shell is working and nothing else, no Ethernet, wifi, flash, ... I have some pending patches to make Ethernet work for this device. Mostly device tree support for bcma is missing. This SoC is used in small office and home router with Broadcom SoCs it's internal name is Northstar. This code should support the BCM4707, BCM4708, BCM4709, BCM53010, BCM53011 and BCM53012 SoC. It uses one or two ARM Cortex A9 Cores, some highlights are 2 PCIe 2.0 controllers, 4 Gigabit Ethernet MACs and a USB 3.0 host controller. This SoC uses a dual core CPU, but this is currently not implemented. More information about this SoC can be found here: http://www.anandtech.com/show/5925/broadcom-announces-bcm4708x-and-bcm5301x-socs-for-80211ac-routers Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-04 07:01:43 +08:00
static const char __initconst *bcm5301x_dt_compat[] = {
"brcm,bcm4708",
NULL,
};
DT_MACHINE_START(BCM5301X, "BCM5301X")
ARM: l2c: bcm_5301x: convert to generic l2c OF initialisation Remove the explicit call to l2x0_of_init(), converting to the generic infrastructure instead. We can remove the explicit machine init too as this becomes identical to the generic version. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-28 22:27:59 +08:00
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
ARM: BCM5301X: workaround suppress fault Without this patch I am getting a unhandled fault exception like this one after "Freeing unused kernel memory": Freeing unused kernel memory: 1260K (c02c1000 - c03fc000) Unhandled fault: imprecise external abort (0x1c06) at 0xb6f89005 Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 The address which is here 0xb6f89005 changes from boot to boot, with a new build the changes are bigger. With kernel 3.10 I have also seen this fault at different places in the boot process, but starting with 3.11 they are always occurring after the "Freeing unused kernel memory" message. I never was able to completely boot to userspace without this handler. The abort code is constant 0x1c06. This fault just happens once in the boot process I have never seen it happing twice or more. I also tried changing the CPSR.A bit to 0 in init_early, with this code like Afzal suggested, but that did not change anything: asm volatile("mrs r12, cpsr\n" "bic r12, r12, #0x00000100\n" "msr cpsr_c, r12" ::: "r12", "cc", "memory"); Disabling the L2 cache by building with CONFIG_CACHE_L2X0 unset did not help. This workaround was copied from the vendor code including most of the comments. It says it they think this is caused by the CFE boot loader used on this device. I do not have any access to any datasheet or errata document to check this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-04 07:01:46 +08:00
.init_early = bcm5301x_init_early,
ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU This patch adds support for the BCM5301X/BCM470X SoCs with an ARM CPUs. Currently just booting to a shell is working and nothing else, no Ethernet, wifi, flash, ... I have some pending patches to make Ethernet work for this device. Mostly device tree support for bcma is missing. This SoC is used in small office and home router with Broadcom SoCs it's internal name is Northstar. This code should support the BCM4707, BCM4708, BCM4709, BCM53010, BCM53011 and BCM53012 SoC. It uses one or two ARM Cortex A9 Cores, some highlights are 2 PCIe 2.0 controllers, 4 Gigabit Ethernet MACs and a USB 3.0 host controller. This SoC uses a dual core CPU, but this is currently not implemented. More information about this SoC can be found here: http://www.anandtech.com/show/5925/broadcom-announces-bcm4708x-and-bcm5301x-socs-for-80211ac-routers Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-04 07:01:43 +08:00
.dt_compat = bcm5301x_dt_compat,
MACHINE_END