openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/x86/include/asm/ftrace.h

65 lines
1.3 KiB
C
Raw Normal View History

x86: Fix ASM_X86__ header guards Change header guards named "ASM_X86__*" to "_ASM_X86_*" since: a. the double underscore is ugly and pointless. b. no leading underscore violates namespace constraints. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-23 13:26:29 +08:00
#ifndef _ASM_X86_FTRACE_H
#define _ASM_X86_FTRACE_H
ftrace: store mcount address in rec->ip Record the address of the mcount call-site. Currently all archs except sparc64 record the address of the instruction following the mcount call-site. Some general cleanups are entailed. Storing mcount addresses in rec->ip enables looking them up in the kprobe hash table later on to check if they're kprobe'd. Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com> Cc: davem@davemloft.net Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-22 02:17:27 +08:00
x86: entry_64 - introduce FTRACE_ frame macro v2 Impact: clean up Itroduce MCOUNT_SAVE/RESTORE_FRAME which allow us to save a number of lines on source level. Also fix a comment in ftrace.h. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-13 05:09:08 +08:00
#ifdef __ASSEMBLY__
.macro MCOUNT_SAVE_FRAME
/* taken from glibc */
subq $0x38, %rsp
movq %rax, (%rsp)
movq %rcx, 8(%rsp)
movq %rdx, 16(%rsp)
movq %rsi, 24(%rsp)
movq %rdi, 32(%rsp)
movq %r8, 40(%rsp)
movq %r9, 48(%rsp)
.endm
.macro MCOUNT_RESTORE_FRAME
movq 48(%rsp), %r9
movq 40(%rsp), %r8
movq 32(%rsp), %rdi
movq 24(%rsp), %rsi
movq 16(%rsp), %rdx
movq 8(%rsp), %rcx
movq (%rsp), %rax
addq $0x38, %rsp
.endm
#endif
ftrace: rename FTRACE to FUNCTION_TRACER Due to confusion between the ftrace infrastructure and the gcc profiling tracer "ftrace", this patch renames the config options from FTRACE to FUNCTION_TRACER. The other two names that are offspring from FTRACE DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same. This patch was generated mostly by script, and partially by hand. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-07 07:06:12 +08:00
#ifdef CONFIG_FUNCTION_TRACER
ftrace: store mcount address in rec->ip Record the address of the mcount call-site. Currently all archs except sparc64 record the address of the instruction following the mcount call-site. Some general cleanups are entailed. Storing mcount addresses in rec->ip enables looking them up in the kprobe hash table later on to check if they're kprobe'd. Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com> Cc: davem@davemloft.net Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-22 02:17:27 +08:00
#define MCOUNT_ADDR ((long)(mcount))
#define MCOUNT_INSN_SIZE 5 /* sizeof mcount call */
ftrace: Pass ftrace_ops as third parameter to function trace callback Currently the function trace callback receives only the ip and parent_ip of the function that it traced. It would be more powerful to also return the ops that registered the function as well. This allows the same function to act differently depending on what ftrace_ops registered it. Link: http://lkml.kernel.org/r/20120612225424.267254552@goodmis.org Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-09 04:57:47 +08:00
#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_X86_64)
#define ARCH_SUPPORTS_FTRACE_OPS 1
#endif
ftrace: store mcount address in rec->ip Record the address of the mcount call-site. Currently all archs except sparc64 record the address of the instruction following the mcount call-site. Some general cleanups are entailed. Storing mcount addresses in rec->ip enables looking them up in the kprobe hash table later on to check if they're kprobe'd. Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com> Cc: davem@davemloft.net Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-22 02:17:27 +08:00
#ifndef __ASSEMBLY__
extern void mcount(void);
ftrace: Synchronize variable setting with breakpoints When the function tracer starts modifying the code via breakpoints it sets a variable (modifying_ftrace_code) to inform the breakpoint handler to call the ftrace int3 code. But there's no synchronization between setting this code and the handler, thus it is possible for the handler to be called on another CPU before it sees the variable. This will cause a kernel crash as the int3 handler will not know what to do with it. I originally added smp_mb()'s to force the visibility of the variable but H. Peter Anvin suggested that I just make it atomic. [ Added comments as suggested by Peter Zijlstra ] Suggested-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-31 01:26:37 +08:00
extern atomic_t modifying_ftrace_code;
ftrace: mcount call site on boot nops core This is the infrastructure to the converting the mcount call sites recorded by the __mcount_loc section into nops on boot. It also allows for using these sites to enable tracing as normal. When the __mcount_loc section is used, the "ftraced" kernel thread is disabled. This uses the current infrastructure to record the mcount call sites as well as convert them to nops. The mcount function is kept as a stub on boot up and not converted to the ftrace_record_ip function. We use the ftrace_record_ip to only record from the table. This patch does not handle modules. That comes with a later patch. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15 03:45:08 +08:00
static inline unsigned long ftrace_call_adjust(unsigned long addr)
{
/*
ftrace/x86: mcount offset calculation Do the mcount offset adjustment in the recordmcount.pl/recordmcount.[ch] at compile time and not in ftrace_call_adjust at run time. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-10 16:10:41 +08:00
* addr is the address of the mcount call instruction.
* recordmcount does the necessary offset calculation.
ftrace: mcount call site on boot nops core This is the infrastructure to the converting the mcount call sites recorded by the __mcount_loc section into nops on boot. It also allows for using these sites to enable tracing as normal. When the __mcount_loc section is used, the "ftraced" kernel thread is disabled. This uses the current infrastructure to record the mcount call sites as well as convert them to nops. The mcount function is kept as a stub on boot up and not converted to the ftrace_record_ip function. We use the ftrace_record_ip to only record from the table. This patch does not handle modules. That comes with a later patch. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15 03:45:08 +08:00
*/
ftrace/x86: mcount offset calculation Do the mcount offset adjustment in the recordmcount.pl/recordmcount.[ch] at compile time and not in ftrace_call_adjust at run time. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-10 16:10:41 +08:00
return addr;
ftrace: mcount call site on boot nops core This is the infrastructure to the converting the mcount call sites recorded by the __mcount_loc section into nops on boot. It also allows for using these sites to enable tracing as normal. When the __mcount_loc section is used, the "ftraced" kernel thread is disabled. This uses the current infrastructure to record the mcount call sites as well as convert them to nops. The mcount function is kept as a stub on boot up and not converted to the ftrace_record_ip function. We use the ftrace_record_ip to only record from the table. This patch does not handle modules. That comes with a later patch. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15 03:45:08 +08:00
}
ftrace: pass module struct to arch dynamic ftrace functions Impact: allow archs more flexibility on dynamic ftrace implementations Dynamic ftrace has largly been developed on x86. Since x86 does not have the same limitations as other architectures, the ftrace interaction between the generic code and the architecture specific code was not flexible enough to handle some of the issues that other architectures have. Most notably, module trampolines. Due to the limited branch distance that archs make in calling kernel core code from modules, the module load code must create a trampoline to jump to what will make the larger jump into core kernel code. The problem arises when this happens to a call to mcount. Ftrace checks all code before modifying it and makes sure the current code is what it expects. Right now, there is not enough information to handle modifying module trampolines. This patch changes the API between generic dynamic ftrace code and the arch dependent code. There is now two functions for modifying code: ftrace_make_nop(mod, rec, addr) - convert the code at rec->ip into a nop, where the original text is calling addr. (mod is the module struct if called by module init) ftrace_make_caller(rec, addr) - convert the code rec->ip that should be a nop into a caller to addr. The record "rec" now has a new field called "arch" where the architecture can add any special attributes to each call site record. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-15 08:21:19 +08:00
#ifdef CONFIG_DYNAMIC_FTRACE
struct dyn_arch_ftrace {
/* No extra data needed for x86 */
};
ftrace/x86: Have arch x86_64 use breakpoints instead of stop machine This method changes x86 to add a breakpoint to the mcount locations instead of calling stop machine. Now that iret can be handled by NMIs, we perform the following to update code: 1) Add a breakpoint to all locations that will be modified 2) Sync all cores 3) Update all locations to be either a nop or call (except breakpoint op) 4) Sync all cores 5) Remove the breakpoint with the new code. 6) Sync all cores [ Added updates that Masami suggested: Use unlikely(modifying_ftrace_code) in int3 trap to keep kprobes efficient. Don't use NOTIFY_* in ftrace handler in int3 as it is not a notifier. ] Cc: H. Peter Anvin <hpa@zytor.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-16 21:57:10 +08:00
int ftrace_int3_handler(struct pt_regs *regs);
ftrace: pass module struct to arch dynamic ftrace functions Impact: allow archs more flexibility on dynamic ftrace implementations Dynamic ftrace has largly been developed on x86. Since x86 does not have the same limitations as other architectures, the ftrace interaction between the generic code and the architecture specific code was not flexible enough to handle some of the issues that other architectures have. Most notably, module trampolines. Due to the limited branch distance that archs make in calling kernel core code from modules, the module load code must create a trampoline to jump to what will make the larger jump into core kernel code. The problem arises when this happens to a call to mcount. Ftrace checks all code before modifying it and makes sure the current code is what it expects. Right now, there is not enough information to handle modifying module trampolines. This patch changes the API between generic dynamic ftrace code and the arch dependent code. There is now two functions for modifying code: ftrace_make_nop(mod, rec, addr) - convert the code at rec->ip into a nop, where the original text is calling addr. (mod is the module struct if called by module init) ftrace_make_caller(rec, addr) - convert the code rec->ip that should be a nop into a caller to addr. The record "rec" now has a new field called "arch" where the architecture can add any special attributes to each call site record. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-15 08:21:19 +08:00
#endif /* CONFIG_DYNAMIC_FTRACE */
ftrace: nmi safe code clean ups Impact: cleanup This patch cleans up the NMI safe code for dynamic ftrace as suggested by Andrew Morton. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 12:03:22 +08:00
#endif /* __ASSEMBLY__ */
ftrace: rename FTRACE to FUNCTION_TRACER Due to confusion between the ftrace infrastructure and the gcc profiling tracer "ftrace", this patch renames the config options from FTRACE to FUNCTION_TRACER. The other two names that are offspring from FTRACE DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same. This patch was generated mostly by script, and partially by hand. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-07 07:06:12 +08:00
#endif /* CONFIG_FUNCTION_TRACER */
ftrace: store mcount address in rec->ip Record the address of the mcount call-site. Currently all archs except sparc64 record the address of the instruction following the mcount call-site. Some general cleanups are entailed. Storing mcount addresses in rec->ip enables looking them up in the kprobe hash table later on to check if they're kprobe'd. Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com> Cc: davem@davemloft.net Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-22 02:17:27 +08:00
x86: Fix ASM_X86__ header guards Change header guards named "ASM_X86__*" to "_ASM_X86_*" since: a. the double underscore is ugly and pointless. b. no leading underscore violates namespace constraints. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-23 13:26:29 +08:00
#endif /* _ASM_X86_FTRACE_H */