linux/drivers/acpi/internal.h

190 lines
7.0 KiB
C
Raw Normal View History

/*
* acpi/internal.h
* For use by Linux/ACPI infrastructure, not drivers
*
* Copyright (c) 2009, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef _ACPI_INTERNAL_H_
#define _ACPI_INTERNAL_H_
#define PREFIX "ACPI: "
acpi_status acpi_os_initialize1(void);
int init_acpi_device_notify(void);
int acpi_scan_init(void);
void acpi_pci_root_init(void);
void acpi_pci_link_init(void);
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 06:26:22 +08:00
void acpi_processor_init(void);
void acpi_platform_init(void);
ACPI / PNP: use device ID list for PNPACPI device enumeration ACPI can be used to enumerate PNP devices, but the code does not handle this in the right way currently. Namely, if an ACPI device object 1. Has a _CRS method, 2. Has an identification of "three capital characters followed by four hex digits", 3. Is not in the excluded IDs list, it will be enumerated to PNP bus (that is, a PNP device object will be create for it). This means that, actually, the PNP bus type is used as the default bus type for enumerating _HID devices in ACPI. However, more and more _HID devices need to be enumerated to the platform bus instead (that is, platform device objects need to be created for them). As a result, the device ID list in acpi_platform.c is used to enforce creating platform device objects rather than PNP device objects for matching devices. That list has been continuously growing recently, unfortunately, and it is pretty much guaranteed to grow even more in the future. To address that problem it is better to enumerate _HID devices as platform devices by default. To this end, change the way of enumerating PNP devices by adding a PNP ACPI scan handler that will use a device ID list to create PNP devices for the ACPI device objects whose device IDs are present in that list. The initial device ID list in the PNP ACPI scan handler contains all of the pnp_device_id strings from all the existing PNP drivers, so this change should be transparent to the PNP core and all of the PNP drivers. Still, in the future it should be possible to reduce its size by converting PNP drivers that need not be PNP for any technical reasons into platform drivers. Signed-off-by: Zhang Rui <rui.zhang@intel.com> [rjw: Rewrote the changelog, modified the PNP ACPI scan handler code] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 10:23:01 +08:00
void acpi_pnp_init(void);
int acpi_sysfs_init(void);
void acpi_container_init(void);
#ifdef CONFIG_ACPI_DOCK
ACPI / dock: Dispatch dock notifications from the global notify handler The ACPI dock station code carries out an extra namespace scan before the main one in order to find and register all of the dock device objects. Then, it registers a notify handler for each of them for handling dock events. However, dock device objects need not be scanned for upfront. They very well can be enumerated and registered during the first phase of the main namespace scan, before attaching scan handlers and ACPI drivers to ACPI device objects. Then, the dependent devices can be added to the in the second phase. That makes it possible to drop the extra namespace scan, so do it. Moreover, it is not necessary to register notify handlers for all of the dock stations' namespace nodes, becuase notifications may be dispatched from the global notify handler for them. Do that and drop two functions used for dock notify handling, acpi_dock_deferred_cb() and dock_notify_handler(), that aren't necessary any more. Finally, some dock station objects have _HID objects matching the ACPI container scan handler which causes it to claim those objects and try to handle their hotplug, but that is not a good idea, because those objects have their own special hotplug handling anyway. For this reason, the hotplug_notify flag should not be set for ACPI device objects representing dock stations and the container scan handler should be made ignore those objects, so make that happen. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-16 08:51:01 +08:00
void register_dock_dependent_device(struct acpi_device *adev,
acpi_handle dshandle);
int dock_notify(struct acpi_device *adev, u32 event);
void acpi_dock_add(struct acpi_device *adev);
#else
ACPI / dock: Dispatch dock notifications from the global notify handler The ACPI dock station code carries out an extra namespace scan before the main one in order to find and register all of the dock device objects. Then, it registers a notify handler for each of them for handling dock events. However, dock device objects need not be scanned for upfront. They very well can be enumerated and registered during the first phase of the main namespace scan, before attaching scan handlers and ACPI drivers to ACPI device objects. Then, the dependent devices can be added to the in the second phase. That makes it possible to drop the extra namespace scan, so do it. Moreover, it is not necessary to register notify handlers for all of the dock stations' namespace nodes, becuase notifications may be dispatched from the global notify handler for them. Do that and drop two functions used for dock notify handling, acpi_dock_deferred_cb() and dock_notify_handler(), that aren't necessary any more. Finally, some dock station objects have _HID objects matching the ACPI container scan handler which causes it to claim those objects and try to handle their hotplug, but that is not a good idea, because those objects have their own special hotplug handling anyway. For this reason, the hotplug_notify flag should not be set for ACPI device objects representing dock stations and the container scan handler should be made ignore those objects, so make that happen. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-16 08:51:01 +08:00
static inline void register_dock_dependent_device(struct acpi_device *adev,
acpi_handle dshandle) {}
static inline int dock_notify(struct acpi_device *adev, u32 event) { return -ENODEV; }
static inline void acpi_dock_add(struct acpi_device *adev) {}
#endif
#ifdef CONFIG_ACPI_HOTPLUG_MEMORY
void acpi_memory_hotplug_init(void);
#else
static inline void acpi_memory_hotplug_init(void) {}
#endif
#ifdef CONFIG_X86
void acpi_cmos_rtc_init(void);
#else
static inline void acpi_cmos_rtc_init(void) {}
#endif
extern bool acpi_force_hot_remove;
void acpi_sysfs_add_hotplug_profile(struct acpi_hotplug_profile *hotplug,
const char *name);
int acpi_scan_add_handler_with_hotplug(struct acpi_scan_handler *handler,
const char *hotplug_profile_name);
void acpi_scan_hotplug_enabled(struct acpi_hotplug_profile *hotplug, bool val);
#ifdef CONFIG_DEBUG_FS
extern struct dentry *acpi_debugfs_dir;
int acpi_debugfs_init(void);
#else
static inline void acpi_debugfs_init(void) { return; }
#endif
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 06:46:20 +08:00
#ifdef CONFIG_X86_INTEL_LPSS
void acpi_lpss_init(void);
#else
static inline void acpi_lpss_init(void) {}
#endif
acpi_status acpi_hotplug_schedule(struct acpi_device *adev, u32 src);
bool acpi_queue_hotplug_work(struct work_struct *work);
void acpi_device_hotplug(struct acpi_device *adev, u32 src);
ACPI / hotplug / driver core: Handle containers in a special way ACPI container devices require special hotplug handling, at least on some systems, since generally user space needs to carry out system-specific cleanup before it makes sense to offline devices in the container. However, the current ACPI hotplug code for containers first attempts to offline devices in the container and only then it notifies user space of the container offline. Moreover, after commit 202317a573b2 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace), ACPI device objects representing containers are present as long as the ACPI namespace nodes corresponding to them are present, which may be forever, even if the container devices are physically detached from the system (the return values of the corresponding _STA methods change in those cases, but generally the namespace nodes themselves are still there). Thus it is useful to introduce entities representing containers that will go away during container hot-unplug. The goal of this change is to address both the above issues. The idea is to create a "companion" container system device for each of the ACPI container device objects during the initial namespace scan or on a hotplug event making the container present. That system device will be unregistered on container removal. A new bus type for container devices is added for this purpose, because device offline and online operations need to be defined for them. The online operation is a trivial function that is always successful and the offline uses a callback pointed to by the container device's offline member. For ACPI containers that callback simply walks the list of ACPI device objects right below the container object (its children) and checks if all of their physical companion devices are offline. If that's not the case, it returns -EBUSY and the container system devivce cannot be put offline. Consequently, to put the container system device offline, it is necessary to put all of the physical devices depending on its ACPI companion object offline beforehand. Container system devices created for ACPI container objects are initially online. They are created by the container ACPI scan handler whose hotplug.demand_offline flag is set. That causes acpi_scan_hot_remove() to check if the companion container system device is offline before attempting to remove an ACPI container or any devices below it. If the check fails, a KOBJ_CHANGE uevent is emitted for the container system device in question and user space is expected to offline all devices below the container and the container itself in response to it. Then, user space can finalize the removal of the container with the help of its ACPI device object's eject attribute in sysfs. Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-29 22:25:48 +08:00
bool acpi_scan_is_offline(struct acpi_device *adev, bool uevent);
/* --------------------------------------------------------------------------
Device Node Initialization / Removal
-------------------------------------------------------------------------- */
#define ACPI_STA_DEFAULT (ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED | \
ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING)
int acpi_device_add(struct acpi_device *device,
void (*release)(struct device *));
void acpi_init_device_object(struct acpi_device *device, acpi_handle handle,
int type, unsigned long long sta);
void acpi_device_add_finalize(struct acpi_device *device);
void acpi_free_pnp_ids(struct acpi_device_pnp *pnp);
int acpi_bind_one(struct device *dev, struct acpi_device *adev);
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 06:26:22 +08:00
int acpi_unbind_one(struct device *dev);
ACPI / scan: Add acpi_device objects for all device nodes in the namespace Modify the ACPI namespace scanning code to register a struct acpi_device object for every namespace node representing a device, processor and so on, even if the device represented by that namespace node is reported to be not present and not functional by _STA. There are multiple reasons to do that. First of all, it avoids quite a lot of overhead when struct acpi_device objects are deleted every time acpi_bus_trim() is run and then added again by a subsequent acpi_bus_scan() for the same scope, although the namespace objects they correspond to stay in memory all the time (which always is the case on a vast majority of systems). Second, it will allow user space to see that there are namespace nodes representing devices that are not present at the moment and may be added to the system. It will also allow user space to evaluate _SUN for those nodes to check what physical slots the "missing" devices may be put into and it will make sense to add a sysfs attribute for _STA evaluation after this change (that will be useful for thermal management on some systems). Next, it will help to consolidate the ACPI hotplug handling among subsystems by making it possible to store hotplug-related information in struct acpi_device objects in a standard common way. Finally, it will help to avoid a race condition related to the deletion of ACPI namespace nodes. Namely, namespace nodes may be deleted as a result of a table unload triggered by _EJ0 or _DCK. If a hotplug notification for one of those nodes is triggered right before the deletion and it executes a hotplug callback via acpi_hotplug_execute(), the ACPI handle passed to that callback may be stale when the callback actually runs. One way to work around that is to always pass struct acpi_device pointers to hotplug callbacks after doing a get_device() on the objects in question which eliminates the use-after-free possibility (the ACPI handles in those objects are invalidated by acpi_scan_drop_device(), so they will trigger ACPICA errors on attempts to use them). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-23 04:54:37 +08:00
bool acpi_device_is_present(struct acpi_device *adev);
bool acpi_device_is_battery(struct acpi_device *adev);
/* --------------------------------------------------------------------------
Power Resource
-------------------------------------------------------------------------- */
int acpi_power_init(void);
void acpi_power_resources_list_free(struct list_head *list);
int acpi_extract_power_resources(union acpi_object *package, unsigned int start,
struct list_head *list);
int acpi_add_power_resource(acpi_handle handle);
void acpi_power_add_remove_device(struct acpi_device *adev, bool add);
ACPI / PM: Take unusual configurations of power resources into account Commit d2e5f0c (ACPI / PCI: Rework the setup and cleanup of device wakeup) moved the initial disabling of system wakeup for PCI devices into a place where it can actually work and that exposed a hidden old issue with crap^Wunusual system designs where the same power resources are used for both wakeup power and device power control at run time. Namely, say there is one power resource such that the ACPI power state D0 of a PCI device depends on that power resource (i.e. the device is in D0 when that power resource is "on") and it is used as a wakeup power resource for the same device. Then, calling acpi_pci_sleep_wake(pci_dev, false) for the device in question will cause the reference counter of that power resource to drop to 0, which in turn will cause it to be turned off. As a result, the device will go into D3cold at that point, although it should have stayed in D0. As it turns out, that happens to USB controllers on some laptops and USB becomes unusable on those machines as a result, which is a major regression from v3.8. To fix this problem, (1) increment the reference counters of wakup power resources during their initialization if they are "on" initially, (2) prevent acpi_disable_wakeup_device_power() from decrementing the reference counters of wakeup power resources that were not enabled for wakeup power previously, and (3) prevent acpi_enable_wakeup_device_power() from incrementing the reference counters of wakeup power resources that already are enabled for wakeup power. In addition to that, if it is impossible to determine the initial states of wakeup power resources, avoid enabling wakeup for devices whose wakeup power depends on those power resources. Reported-by: Dave Jones <davej@redhat.com> Reported-by: Fabio Baltieri <fabio.baltieri@linaro.org> Tested-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-24 06:15:21 +08:00
int acpi_power_wakeup_list_init(struct list_head *list, int *system_level);
int acpi_device_sleep_wake(struct acpi_device *dev,
int enable, int sleep_state, int dev_state);
int acpi_power_get_inferred_state(struct acpi_device *device, int *state);
int acpi_power_on_resources(struct acpi_device *device, int state);
int acpi_power_transition(struct acpi_device *device, int state);
ACPI / scan: Add acpi_device objects for all device nodes in the namespace Modify the ACPI namespace scanning code to register a struct acpi_device object for every namespace node representing a device, processor and so on, even if the device represented by that namespace node is reported to be not present and not functional by _STA. There are multiple reasons to do that. First of all, it avoids quite a lot of overhead when struct acpi_device objects are deleted every time acpi_bus_trim() is run and then added again by a subsequent acpi_bus_scan() for the same scope, although the namespace objects they correspond to stay in memory all the time (which always is the case on a vast majority of systems). Second, it will allow user space to see that there are namespace nodes representing devices that are not present at the moment and may be added to the system. It will also allow user space to evaluate _SUN for those nodes to check what physical slots the "missing" devices may be put into and it will make sense to add a sysfs attribute for _STA evaluation after this change (that will be useful for thermal management on some systems). Next, it will help to consolidate the ACPI hotplug handling among subsystems by making it possible to store hotplug-related information in struct acpi_device objects in a standard common way. Finally, it will help to avoid a race condition related to the deletion of ACPI namespace nodes. Namely, namespace nodes may be deleted as a result of a table unload triggered by _EJ0 or _DCK. If a hotplug notification for one of those nodes is triggered right before the deletion and it executes a hotplug callback via acpi_hotplug_execute(), the ACPI handle passed to that callback may be stale when the callback actually runs. One way to work around that is to always pass struct acpi_device pointers to hotplug callbacks after doing a get_device() on the objects in question which eliminates the use-after-free possibility (the ACPI handles in those objects are invalidated by acpi_scan_drop_device(), so they will trigger ACPICA errors on attempts to use them). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-23 04:54:37 +08:00
int acpi_device_update_power(struct acpi_device *device, int *state_p);
int acpi_wakeup_device_init(void);
void acpi_early_processor_set_pdc(void);
/* --------------------------------------------------------------------------
Embedded Controller
-------------------------------------------------------------------------- */
struct acpi_ec {
acpi_handle handle;
unsigned long gpe;
unsigned long command_addr;
unsigned long data_addr;
unsigned long global_lock;
unsigned long flags;
struct mutex mutex;
wait_queue_head_t wait;
struct list_head list;
struct transaction *curr;
spinlock_t lock;
};
extern struct acpi_ec *first_ec;
/* If we find an EC via the ECDT, we need to keep a ptr to its context */
/* External interfaces use first EC only, so remember */
typedef int (*acpi_ec_query_func) (void *data);
int acpi_ec_init(void);
int acpi_ec_ecdt_probe(void);
int acpi_boot_ec_enable(void);
void acpi_ec_block_transactions(void);
void acpi_ec_unblock_transactions(void);
void acpi_ec_unblock_transactions_early(void);
int acpi_ec_add_query_handler(struct acpi_ec *ec, u8 query_bit,
acpi_handle handle, acpi_ec_query_func func,
void *data);
void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit);
/*--------------------------------------------------------------------------
Suspend/Resume
-------------------------------------------------------------------------- */
extern int acpi_sleep_init(void);
#ifdef CONFIG_ACPI_SLEEP
int acpi_sleep_proc_init(void);
int suspend_nvs_alloc(void);
void suspend_nvs_free(void);
int suspend_nvs_save(void);
void suspend_nvs_restore(void);
#else
static inline int acpi_sleep_proc_init(void) { return 0; }
static inline int suspend_nvs_alloc(void) { return 0; }
static inline void suspend_nvs_free(void) {}
static inline int suspend_nvs_save(void) { return 0; }
static inline void suspend_nvs_restore(void) {}
#endif
/*--------------------------------------------------------------------------
Platform bus support
-------------------------------------------------------------------------- */
struct platform_device;
struct platform_device *acpi_create_platform_device(struct acpi_device *adev);
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 06:46:20 +08:00
ACPI / video / i915: No ACPI backlight if firmware expects Windows 8 According to Matthew Garrett, "Windows 8 leaves backlight control up to individual graphics drivers rather than making ACPI calls itself. There's plenty of evidence to suggest that the Intel driver for Windows [8] doesn't use the ACPI interface, including the fact that it's broken on a bunch of machines when the OS claims to support Windows 8. The simplest thing to do appears to be to disable the ACPI backlight interface on these systems". There's a problem with that approach, however, because simply avoiding to register the ACPI backlight interface if the firmware calls _OSI for Windows 8 may not work in the following situations: (1) The ACPI backlight interface actually works on the given system and the i915 driver is not loaded (e.g. another graphics driver is used). (2) The ACPI backlight interface doesn't work on the given system, but there is a vendor platform driver that will register its own, equally broken, backlight interface if not prevented from doing so by the ACPI subsystem. Therefore we need to allow the ACPI backlight interface to be registered until the i915 driver is loaded which then will unregister it if the firmware has called _OSI for Windows 8 (or will register the ACPI video driver without backlight support if not already present). For this reason, introduce an alternative function for registering ACPI video, acpi_video_register_with_quirks(), that will check whether or not the ACPI video driver has already been registered and whether or not the backlight Windows 8 quirk has to be applied. If the quirk has to be applied, it will block the ACPI backlight support and either unregister the backlight interface if the ACPI video driver has already been registered, or register the ACPI video driver without the backlight interface otherwise. Make the i915 driver use acpi_video_register_with_quirks() instead of acpi_video_register() in i915_driver_load(). This change is based on earlier patches from Matthew Garrett, Chun-Yi Lee and Seth Forshee and includes a fix from Aaron Lu's. References: https://bugzilla.kernel.org/show_bug.cgi?id=51231 Tested-by: Aaron Lu <aaron.lu@intel.com> Tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Tested-by: Yves-Alexis Perez <corsac@debian.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-18 08:08:06 +08:00
/*--------------------------------------------------------------------------
Video
-------------------------------------------------------------------------- */
#if defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE)
bool acpi_osi_is_win8(void);
ACPI / video / i915: No ACPI backlight if firmware expects Windows 8 According to Matthew Garrett, "Windows 8 leaves backlight control up to individual graphics drivers rather than making ACPI calls itself. There's plenty of evidence to suggest that the Intel driver for Windows [8] doesn't use the ACPI interface, including the fact that it's broken on a bunch of machines when the OS claims to support Windows 8. The simplest thing to do appears to be to disable the ACPI backlight interface on these systems". There's a problem with that approach, however, because simply avoiding to register the ACPI backlight interface if the firmware calls _OSI for Windows 8 may not work in the following situations: (1) The ACPI backlight interface actually works on the given system and the i915 driver is not loaded (e.g. another graphics driver is used). (2) The ACPI backlight interface doesn't work on the given system, but there is a vendor platform driver that will register its own, equally broken, backlight interface if not prevented from doing so by the ACPI subsystem. Therefore we need to allow the ACPI backlight interface to be registered until the i915 driver is loaded which then will unregister it if the firmware has called _OSI for Windows 8 (or will register the ACPI video driver without backlight support if not already present). For this reason, introduce an alternative function for registering ACPI video, acpi_video_register_with_quirks(), that will check whether or not the ACPI video driver has already been registered and whether or not the backlight Windows 8 quirk has to be applied. If the quirk has to be applied, it will block the ACPI backlight support and either unregister the backlight interface if the ACPI video driver has already been registered, or register the ACPI video driver without the backlight interface otherwise. Make the i915 driver use acpi_video_register_with_quirks() instead of acpi_video_register() in i915_driver_load(). This change is based on earlier patches from Matthew Garrett, Chun-Yi Lee and Seth Forshee and includes a fix from Aaron Lu's. References: https://bugzilla.kernel.org/show_bug.cgi?id=51231 Tested-by: Aaron Lu <aaron.lu@intel.com> Tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Tested-by: Yves-Alexis Perez <corsac@debian.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-18 08:08:06 +08:00
#endif
#endif /* _ACPI_INTERNAL_H_ */