linux/net/bpf/test_run.c

200 lines
5.0 KiB
C
Raw Normal View History

bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
/* Copyright (c) 2017 Facebook
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
* License as published by the Free Software Foundation.
*/
#include <linux/bpf.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/etherdevice.h>
#include <linux/filter.h>
#include <linux/sched/signal.h>
static __always_inline u32 bpf_test_run_one(struct bpf_prog *prog, void *ctx,
struct bpf_cgroup_storage *storage)
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
{
u32 ret;
preempt_disable();
rcu_read_lock();
bpf_cgroup_storage_set(storage);
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
ret = BPF_PROG_RUN(prog, ctx);
rcu_read_unlock();
preempt_enable();
return ret;
}
static u32 bpf_test_run(struct bpf_prog *prog, void *ctx, u32 repeat, u32 *time)
{
struct bpf_cgroup_storage *storage = NULL;
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
u64 time_start, time_spent = 0;
u32 ret = 0, i;
storage = bpf_cgroup_storage_alloc(prog);
if (IS_ERR(storage))
return PTR_ERR(storage);
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
if (!repeat)
repeat = 1;
time_start = ktime_get_ns();
for (i = 0; i < repeat; i++) {
ret = bpf_test_run_one(prog, ctx, storage);
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
if (need_resched()) {
if (signal_pending(current))
break;
time_spent += ktime_get_ns() - time_start;
cond_resched();
time_start = ktime_get_ns();
}
}
time_spent += ktime_get_ns() - time_start;
do_div(time_spent, repeat);
*time = time_spent > U32_MAX ? U32_MAX : (u32)time_spent;
bpf_cgroup_storage_free(storage);
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
return ret;
}
static int bpf_test_finish(const union bpf_attr *kattr,
union bpf_attr __user *uattr, const void *data,
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
u32 size, u32 retval, u32 duration)
{
void __user *data_out = u64_to_user_ptr(kattr->test.data_out);
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
int err = -EFAULT;
if (data_out && copy_to_user(data_out, data, size))
goto out;
if (copy_to_user(&uattr->test.data_size_out, &size, sizeof(size)))
goto out;
if (copy_to_user(&uattr->test.retval, &retval, sizeof(retval)))
goto out;
if (copy_to_user(&uattr->test.duration, &duration, sizeof(duration)))
goto out;
err = 0;
out:
return err;
}
static void *bpf_test_init(const union bpf_attr *kattr, u32 size,
u32 headroom, u32 tailroom)
{
void __user *data_in = u64_to_user_ptr(kattr->test.data_in);
void *data;
if (size < ETH_HLEN || size > PAGE_SIZE - headroom - tailroom)
return ERR_PTR(-EINVAL);
data = kzalloc(size + headroom + tailroom, GFP_USER);
if (!data)
return ERR_PTR(-ENOMEM);
if (copy_from_user(data + headroom, data_in, size)) {
kfree(data);
return ERR_PTR(-EFAULT);
}
return data;
}
int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr,
union bpf_attr __user *uattr)
{
bool is_l2 = false, is_direct_pkt_access = false;
u32 size = kattr->test.data_size_in;
u32 repeat = kattr->test.repeat;
u32 retval, duration;
bpf: fix panic due to oob in bpf_prog_test_run_skb sykzaller triggered several panics similar to the below: [...] [ 248.851531] BUG: KASAN: use-after-free in _copy_to_user+0x5c/0x90 [ 248.857656] Read of size 985 at addr ffff8808017ffff2 by task a.out/1425 [...] [ 248.865902] CPU: 1 PID: 1425 Comm: a.out Not tainted 4.18.0-rc4+ #13 [ 248.865903] Hardware name: Supermicro SYS-5039MS-H12TRF/X11SSE-F, BIOS 2.1a 03/08/2018 [ 248.865905] Call Trace: [ 248.865910] dump_stack+0xd6/0x185 [ 248.865911] ? show_regs_print_info+0xb/0xb [ 248.865913] ? printk+0x9c/0xc3 [ 248.865915] ? kmsg_dump_rewind_nolock+0xe4/0xe4 [ 248.865919] print_address_description+0x6f/0x270 [ 248.865920] kasan_report+0x25b/0x380 [ 248.865922] ? _copy_to_user+0x5c/0x90 [ 248.865924] check_memory_region+0x137/0x190 [ 248.865925] kasan_check_read+0x11/0x20 [ 248.865927] _copy_to_user+0x5c/0x90 [ 248.865930] bpf_test_finish.isra.8+0x4f/0xc0 [ 248.865932] bpf_prog_test_run_skb+0x6a0/0xba0 [...] After scrubbing the BPF prog a bit from the noise, turns out it called bpf_skb_change_head() for the lwt_xmit prog with headroom of 2. Nothing wrong in that, however, this was run with repeat >> 0 in bpf_prog_test_run_skb() and the same skb thus keeps changing until the pskb_expand_head() called from skb_cow() keeps bailing out in atomic alloc context with -ENOMEM. So upon return we'll basically have 0 headroom left yet blindly do the __skb_push() of 14 bytes and keep copying data from there in bpf_test_finish() out of bounds. Fix to check if we have enough headroom and if pskb_expand_head() fails, bail out with error. Another bug independent of this fix (but related in triggering above) is that BPF_PROG_TEST_RUN should be reworked to reset the skb/xdp buffer to it's original state from input as otherwise repeating the same test in a loop won't work for benchmarking when underlying input buffer is getting changed by the prog each time and reused for the next run leading to unexpected results. Fixes: 1cf1cae963c2 ("bpf: introduce BPF_PROG_TEST_RUN command") Reported-by: syzbot+709412e651e55ed96498@syzkaller.appspotmail.com Reported-by: syzbot+54f39d6ab58f39720a55@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-11 21:30:14 +08:00
int hh_len = ETH_HLEN;
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
struct sk_buff *skb;
void *data;
int ret;
data = bpf_test_init(kattr, size, NET_SKB_PAD + NET_IP_ALIGN,
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
SKB_DATA_ALIGN(sizeof(struct skb_shared_info)));
if (IS_ERR(data))
return PTR_ERR(data);
switch (prog->type) {
case BPF_PROG_TYPE_SCHED_CLS:
case BPF_PROG_TYPE_SCHED_ACT:
is_l2 = true;
/* fall through */
case BPF_PROG_TYPE_LWT_IN:
case BPF_PROG_TYPE_LWT_OUT:
case BPF_PROG_TYPE_LWT_XMIT:
is_direct_pkt_access = true;
break;
default:
break;
}
skb = build_skb(data, 0);
if (!skb) {
kfree(data);
return -ENOMEM;
}
skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN);
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
__skb_put(skb, size);
skb->protocol = eth_type_trans(skb, current->nsproxy->net_ns->loopback_dev);
skb_reset_network_header(skb);
if (is_l2)
bpf: fix panic due to oob in bpf_prog_test_run_skb sykzaller triggered several panics similar to the below: [...] [ 248.851531] BUG: KASAN: use-after-free in _copy_to_user+0x5c/0x90 [ 248.857656] Read of size 985 at addr ffff8808017ffff2 by task a.out/1425 [...] [ 248.865902] CPU: 1 PID: 1425 Comm: a.out Not tainted 4.18.0-rc4+ #13 [ 248.865903] Hardware name: Supermicro SYS-5039MS-H12TRF/X11SSE-F, BIOS 2.1a 03/08/2018 [ 248.865905] Call Trace: [ 248.865910] dump_stack+0xd6/0x185 [ 248.865911] ? show_regs_print_info+0xb/0xb [ 248.865913] ? printk+0x9c/0xc3 [ 248.865915] ? kmsg_dump_rewind_nolock+0xe4/0xe4 [ 248.865919] print_address_description+0x6f/0x270 [ 248.865920] kasan_report+0x25b/0x380 [ 248.865922] ? _copy_to_user+0x5c/0x90 [ 248.865924] check_memory_region+0x137/0x190 [ 248.865925] kasan_check_read+0x11/0x20 [ 248.865927] _copy_to_user+0x5c/0x90 [ 248.865930] bpf_test_finish.isra.8+0x4f/0xc0 [ 248.865932] bpf_prog_test_run_skb+0x6a0/0xba0 [...] After scrubbing the BPF prog a bit from the noise, turns out it called bpf_skb_change_head() for the lwt_xmit prog with headroom of 2. Nothing wrong in that, however, this was run with repeat >> 0 in bpf_prog_test_run_skb() and the same skb thus keeps changing until the pskb_expand_head() called from skb_cow() keeps bailing out in atomic alloc context with -ENOMEM. So upon return we'll basically have 0 headroom left yet blindly do the __skb_push() of 14 bytes and keep copying data from there in bpf_test_finish() out of bounds. Fix to check if we have enough headroom and if pskb_expand_head() fails, bail out with error. Another bug independent of this fix (but related in triggering above) is that BPF_PROG_TEST_RUN should be reworked to reset the skb/xdp buffer to it's original state from input as otherwise repeating the same test in a loop won't work for benchmarking when underlying input buffer is getting changed by the prog each time and reused for the next run leading to unexpected results. Fixes: 1cf1cae963c2 ("bpf: introduce BPF_PROG_TEST_RUN command") Reported-by: syzbot+709412e651e55ed96498@syzkaller.appspotmail.com Reported-by: syzbot+54f39d6ab58f39720a55@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-11 21:30:14 +08:00
__skb_push(skb, hh_len);
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
if (is_direct_pkt_access)
bpf_compute_data_pointers(skb);
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
retval = bpf_test_run(prog, skb, repeat, &duration);
bpf: fix panic due to oob in bpf_prog_test_run_skb sykzaller triggered several panics similar to the below: [...] [ 248.851531] BUG: KASAN: use-after-free in _copy_to_user+0x5c/0x90 [ 248.857656] Read of size 985 at addr ffff8808017ffff2 by task a.out/1425 [...] [ 248.865902] CPU: 1 PID: 1425 Comm: a.out Not tainted 4.18.0-rc4+ #13 [ 248.865903] Hardware name: Supermicro SYS-5039MS-H12TRF/X11SSE-F, BIOS 2.1a 03/08/2018 [ 248.865905] Call Trace: [ 248.865910] dump_stack+0xd6/0x185 [ 248.865911] ? show_regs_print_info+0xb/0xb [ 248.865913] ? printk+0x9c/0xc3 [ 248.865915] ? kmsg_dump_rewind_nolock+0xe4/0xe4 [ 248.865919] print_address_description+0x6f/0x270 [ 248.865920] kasan_report+0x25b/0x380 [ 248.865922] ? _copy_to_user+0x5c/0x90 [ 248.865924] check_memory_region+0x137/0x190 [ 248.865925] kasan_check_read+0x11/0x20 [ 248.865927] _copy_to_user+0x5c/0x90 [ 248.865930] bpf_test_finish.isra.8+0x4f/0xc0 [ 248.865932] bpf_prog_test_run_skb+0x6a0/0xba0 [...] After scrubbing the BPF prog a bit from the noise, turns out it called bpf_skb_change_head() for the lwt_xmit prog with headroom of 2. Nothing wrong in that, however, this was run with repeat >> 0 in bpf_prog_test_run_skb() and the same skb thus keeps changing until the pskb_expand_head() called from skb_cow() keeps bailing out in atomic alloc context with -ENOMEM. So upon return we'll basically have 0 headroom left yet blindly do the __skb_push() of 14 bytes and keep copying data from there in bpf_test_finish() out of bounds. Fix to check if we have enough headroom and if pskb_expand_head() fails, bail out with error. Another bug independent of this fix (but related in triggering above) is that BPF_PROG_TEST_RUN should be reworked to reset the skb/xdp buffer to it's original state from input as otherwise repeating the same test in a loop won't work for benchmarking when underlying input buffer is getting changed by the prog each time and reused for the next run leading to unexpected results. Fixes: 1cf1cae963c2 ("bpf: introduce BPF_PROG_TEST_RUN command") Reported-by: syzbot+709412e651e55ed96498@syzkaller.appspotmail.com Reported-by: syzbot+54f39d6ab58f39720a55@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-11 21:30:14 +08:00
if (!is_l2) {
if (skb_headroom(skb) < hh_len) {
int nhead = HH_DATA_ALIGN(hh_len - skb_headroom(skb));
if (pskb_expand_head(skb, nhead, 0, GFP_USER)) {
kfree_skb(skb);
return -ENOMEM;
}
}
memset(__skb_push(skb, hh_len), 0, hh_len);
}
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
size = skb->len;
/* bpf program can never convert linear skb to non-linear */
if (WARN_ON_ONCE(skb_is_nonlinear(skb)))
size = skb_headlen(skb);
ret = bpf_test_finish(kattr, uattr, skb->data, size, retval, duration);
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
kfree_skb(skb);
return ret;
}
int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
union bpf_attr __user *uattr)
{
u32 size = kattr->test.data_size_in;
u32 repeat = kattr->test.repeat;
struct netdev_rx_queue *rxqueue;
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
struct xdp_buff xdp = {};
u32 retval, duration;
void *data;
int ret;
data = bpf_test_init(kattr, size, XDP_PACKET_HEADROOM + NET_IP_ALIGN, 0);
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
if (IS_ERR(data))
return PTR_ERR(data);
xdp.data_hard_start = data;
xdp.data = data + XDP_PACKET_HEADROOM + NET_IP_ALIGN;
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 08:25:51 +08:00
xdp.data_meta = xdp.data;
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
xdp.data_end = xdp.data + size;
rxqueue = __netif_get_rx_queue(current->nsproxy->net_ns->loopback_dev, 0);
xdp.rxq = &rxqueue->xdp_rxq;
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
retval = bpf_test_run(prog, &xdp, repeat, &duration);
if (xdp.data != data + XDP_PACKET_HEADROOM + NET_IP_ALIGN ||
xdp.data_end != xdp.data + size)
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
size = xdp.data_end - xdp.data;
ret = bpf_test_finish(kattr, uattr, xdp.data, size, retval, duration);
bpf: introduce BPF_PROG_TEST_RUN command development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 12:45:38 +08:00
kfree(data);
return ret;
}