linux/drivers/net/cxgb3/sge.c

2900 lines
82 KiB
C
Raw Normal View History

/*
* Copyright (c) 2005-2007 Chelsio, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/if_vlan.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/dma-mapping.h>
#include "common.h"
#include "regs.h"
#include "sge_defs.h"
#include "t3_cpl.h"
#include "firmware_exports.h"
#define USE_GTS 0
#define SGE_RX_SM_BUF_SIZE 1536
#define SGE_RX_COPY_THRES 256
#define SGE_RX_PULL_LEN 128
/*
* Page chunk size for FL0 buffers if FL0 is to be populated with page chunks.
* It must be a divisor of PAGE_SIZE. If set to 0 FL0 will use sk_buffs
* directly.
*/
#define FL0_PG_CHUNK_SIZE 2048
#define SGE_RX_DROP_THRES 16
/*
* Period of the Tx buffer reclaim timer. This timer does not need to run
* frequently as Tx buffers are usually reclaimed by new Tx packets.
*/
#define TX_RECLAIM_PERIOD (HZ / 4)
/* WR size in bytes */
#define WR_LEN (WR_FLITS * 8)
/*
* Types of Tx queues in each queue set. Order here matters, do not change.
*/
enum { TXQ_ETH, TXQ_OFLD, TXQ_CTRL };
/* Values for sge_txq.flags */
enum {
TXQ_RUNNING = 1 << 0, /* fetch engine is running */
TXQ_LAST_PKT_DB = 1 << 1, /* last packet rang the doorbell */
};
struct tx_desc {
__be64 flit[TX_DESC_FLITS];
};
struct rx_desc {
__be32 addr_lo;
__be32 len_gen;
__be32 gen2;
__be32 addr_hi;
};
struct tx_sw_desc { /* SW state per Tx descriptor */
struct sk_buff *skb;
u8 eop; /* set if last descriptor for packet */
u8 addr_idx; /* buffer index of first SGL entry in descriptor */
u8 fragidx; /* first page fragment associated with descriptor */
s8 sflit; /* start flit of first SGL entry in descriptor */
};
struct rx_sw_desc { /* SW state per Rx descriptor */
union {
struct sk_buff *skb;
struct fl_pg_chunk pg_chunk;
};
DECLARE_PCI_UNMAP_ADDR(dma_addr);
};
struct rsp_desc { /* response queue descriptor */
struct rss_header rss_hdr;
__be32 flags;
__be32 len_cq;
u8 imm_data[47];
u8 intr_gen;
};
/*
* Holds unmapping information for Tx packets that need deferred unmapping.
* This structure lives at skb->head and must be allocated by callers.
*/
struct deferred_unmap_info {
struct pci_dev *pdev;
dma_addr_t addr[MAX_SKB_FRAGS + 1];
};
/*
* Maps a number of flits to the number of Tx descriptors that can hold them.
* The formula is
*
* desc = 1 + (flits - 2) / (WR_FLITS - 1).
*
* HW allows up to 4 descriptors to be combined into a WR.
*/
static u8 flit_desc_map[] = {
0,
#if SGE_NUM_GENBITS == 1
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4
#elif SGE_NUM_GENBITS == 2
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
#else
# error "SGE_NUM_GENBITS must be 1 or 2"
#endif
};
static inline struct sge_qset *fl_to_qset(const struct sge_fl *q, int qidx)
{
return container_of(q, struct sge_qset, fl[qidx]);
}
static inline struct sge_qset *rspq_to_qset(const struct sge_rspq *q)
{
return container_of(q, struct sge_qset, rspq);
}
static inline struct sge_qset *txq_to_qset(const struct sge_txq *q, int qidx)
{
return container_of(q, struct sge_qset, txq[qidx]);
}
/**
* refill_rspq - replenish an SGE response queue
* @adapter: the adapter
* @q: the response queue to replenish
* @credits: how many new responses to make available
*
* Replenishes a response queue by making the supplied number of responses
* available to HW.
*/
static inline void refill_rspq(struct adapter *adapter,
const struct sge_rspq *q, unsigned int credits)
{
rmb();
t3_write_reg(adapter, A_SG_RSPQ_CREDIT_RETURN,
V_RSPQ(q->cntxt_id) | V_CREDITS(credits));
}
/**
* need_skb_unmap - does the platform need unmapping of sk_buffs?
*
* Returns true if the platfrom needs sk_buff unmapping. The compiler
* optimizes away unecessary code if this returns true.
*/
static inline int need_skb_unmap(void)
{
/*
* This structure is used to tell if the platfrom needs buffer
* unmapping by checking if DECLARE_PCI_UNMAP_ADDR defines anything.
*/
struct dummy {
DECLARE_PCI_UNMAP_ADDR(addr);
};
return sizeof(struct dummy) != 0;
}
/**
* unmap_skb - unmap a packet main body and its page fragments
* @skb: the packet
* @q: the Tx queue containing Tx descriptors for the packet
* @cidx: index of Tx descriptor
* @pdev: the PCI device
*
* Unmap the main body of an sk_buff and its page fragments, if any.
* Because of the fairly complicated structure of our SGLs and the desire
* to conserve space for metadata, the information necessary to unmap an
* sk_buff is spread across the sk_buff itself (buffer lengths), the HW Tx
* descriptors (the physical addresses of the various data buffers), and
* the SW descriptor state (assorted indices). The send functions
* initialize the indices for the first packet descriptor so we can unmap
* the buffers held in the first Tx descriptor here, and we have enough
* information at this point to set the state for the next Tx descriptor.
*
* Note that it is possible to clean up the first descriptor of a packet
* before the send routines have written the next descriptors, but this
* race does not cause any problem. We just end up writing the unmapping
* info for the descriptor first.
*/
static inline void unmap_skb(struct sk_buff *skb, struct sge_txq *q,
unsigned int cidx, struct pci_dev *pdev)
{
const struct sg_ent *sgp;
struct tx_sw_desc *d = &q->sdesc[cidx];
int nfrags, frag_idx, curflit, j = d->addr_idx;
sgp = (struct sg_ent *)&q->desc[cidx].flit[d->sflit];
frag_idx = d->fragidx;
if (frag_idx == 0 && skb_headlen(skb)) {
pci_unmap_single(pdev, be64_to_cpu(sgp->addr[0]),
skb_headlen(skb), PCI_DMA_TODEVICE);
j = 1;
}
curflit = d->sflit + 1 + j;
nfrags = skb_shinfo(skb)->nr_frags;
while (frag_idx < nfrags && curflit < WR_FLITS) {
pci_unmap_page(pdev, be64_to_cpu(sgp->addr[j]),
skb_shinfo(skb)->frags[frag_idx].size,
PCI_DMA_TODEVICE);
j ^= 1;
if (j == 0) {
sgp++;
curflit++;
}
curflit++;
frag_idx++;
}
if (frag_idx < nfrags) { /* SGL continues into next Tx descriptor */
d = cidx + 1 == q->size ? q->sdesc : d + 1;
d->fragidx = frag_idx;
d->addr_idx = j;
d->sflit = curflit - WR_FLITS - j; /* sflit can be -1 */
}
}
/**
* free_tx_desc - reclaims Tx descriptors and their buffers
* @adapter: the adapter
* @q: the Tx queue to reclaim descriptors from
* @n: the number of descriptors to reclaim
*
* Reclaims Tx descriptors from an SGE Tx queue and frees the associated
* Tx buffers. Called with the Tx queue lock held.
*/
static void free_tx_desc(struct adapter *adapter, struct sge_txq *q,
unsigned int n)
{
struct tx_sw_desc *d;
struct pci_dev *pdev = adapter->pdev;
unsigned int cidx = q->cidx;
const int need_unmap = need_skb_unmap() &&
q->cntxt_id >= FW_TUNNEL_SGEEC_START;
d = &q->sdesc[cidx];
while (n--) {
if (d->skb) { /* an SGL is present */
if (need_unmap)
unmap_skb(d->skb, q, cidx, pdev);
if (d->eop)
kfree_skb(d->skb);
}
++d;
if (++cidx == q->size) {
cidx = 0;
d = q->sdesc;
}
}
q->cidx = cidx;
}
/**
* reclaim_completed_tx - reclaims completed Tx descriptors
* @adapter: the adapter
* @q: the Tx queue to reclaim completed descriptors from
*
* Reclaims Tx descriptors that the SGE has indicated it has processed,
* and frees the associated buffers if possible. Called with the Tx
* queue's lock held.
*/
static inline void reclaim_completed_tx(struct adapter *adapter,
struct sge_txq *q)
{
unsigned int reclaim = q->processed - q->cleaned;
if (reclaim) {
free_tx_desc(adapter, q, reclaim);
q->cleaned += reclaim;
q->in_use -= reclaim;
}
}
/**
* should_restart_tx - are there enough resources to restart a Tx queue?
* @q: the Tx queue
*
* Checks if there are enough descriptors to restart a suspended Tx queue.
*/
static inline int should_restart_tx(const struct sge_txq *q)
{
unsigned int r = q->processed - q->cleaned;
return q->in_use - r < (q->size >> 1);
}
/**
* free_rx_bufs - free the Rx buffers on an SGE free list
* @pdev: the PCI device associated with the adapter
* @rxq: the SGE free list to clean up
*
* Release the buffers on an SGE free-buffer Rx queue. HW fetching from
* this queue should be stopped before calling this function.
*/
static void free_rx_bufs(struct pci_dev *pdev, struct sge_fl *q)
{
unsigned int cidx = q->cidx;
while (q->credits--) {
struct rx_sw_desc *d = &q->sdesc[cidx];
pci_unmap_single(pdev, pci_unmap_addr(d, dma_addr),
q->buf_size, PCI_DMA_FROMDEVICE);
if (q->use_pages) {
put_page(d->pg_chunk.page);
d->pg_chunk.page = NULL;
} else {
kfree_skb(d->skb);
d->skb = NULL;
}
if (++cidx == q->size)
cidx = 0;
}
if (q->pg_chunk.page) {
__free_page(q->pg_chunk.page);
q->pg_chunk.page = NULL;
}
}
/**
* add_one_rx_buf - add a packet buffer to a free-buffer list
* @va: buffer start VA
* @len: the buffer length
* @d: the HW Rx descriptor to write
* @sd: the SW Rx descriptor to write
* @gen: the generation bit value
* @pdev: the PCI device associated with the adapter
*
* Add a buffer of the given length to the supplied HW and SW Rx
* descriptors.
*/
static inline void add_one_rx_buf(void *va, unsigned int len,
struct rx_desc *d, struct rx_sw_desc *sd,
unsigned int gen, struct pci_dev *pdev)
{
dma_addr_t mapping;
mapping = pci_map_single(pdev, va, len, PCI_DMA_FROMDEVICE);
pci_unmap_addr_set(sd, dma_addr, mapping);
d->addr_lo = cpu_to_be32(mapping);
d->addr_hi = cpu_to_be32((u64) mapping >> 32);
wmb();
d->len_gen = cpu_to_be32(V_FLD_GEN1(gen));
d->gen2 = cpu_to_be32(V_FLD_GEN2(gen));
}
static int alloc_pg_chunk(struct sge_fl *q, struct rx_sw_desc *sd, gfp_t gfp)
{
if (!q->pg_chunk.page) {
q->pg_chunk.page = alloc_page(gfp);
if (unlikely(!q->pg_chunk.page))
return -ENOMEM;
q->pg_chunk.va = page_address(q->pg_chunk.page);
q->pg_chunk.offset = 0;
}
sd->pg_chunk = q->pg_chunk;
q->pg_chunk.offset += q->buf_size;
if (q->pg_chunk.offset == PAGE_SIZE)
q->pg_chunk.page = NULL;
else {
q->pg_chunk.va += q->buf_size;
get_page(q->pg_chunk.page);
}
return 0;
}
/**
* refill_fl - refill an SGE free-buffer list
* @adapter: the adapter
* @q: the free-list to refill
* @n: the number of new buffers to allocate
* @gfp: the gfp flags for allocating new buffers
*
* (Re)populate an SGE free-buffer list with up to @n new packet buffers,
* allocated with the supplied gfp flags. The caller must assure that
* @n does not exceed the queue's capacity.
*/
static void refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp)
{
void *buf_start;
struct rx_sw_desc *sd = &q->sdesc[q->pidx];
struct rx_desc *d = &q->desc[q->pidx];
while (n--) {
if (q->use_pages) {
if (unlikely(alloc_pg_chunk(q, sd, gfp))) {
nomem: q->alloc_failed++;
break;
}
buf_start = sd->pg_chunk.va;
} else {
struct sk_buff *skb = alloc_skb(q->buf_size, gfp);
if (!skb)
goto nomem;
sd->skb = skb;
buf_start = skb->data;
}
add_one_rx_buf(buf_start, q->buf_size, d, sd, q->gen,
adap->pdev);
d++;
sd++;
if (++q->pidx == q->size) {
q->pidx = 0;
q->gen ^= 1;
sd = q->sdesc;
d = q->desc;
}
q->credits++;
}
wmb();
t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id));
}
static inline void __refill_fl(struct adapter *adap, struct sge_fl *fl)
{
refill_fl(adap, fl, min(16U, fl->size - fl->credits), GFP_ATOMIC);
}
/**
* recycle_rx_buf - recycle a receive buffer
* @adapter: the adapter
* @q: the SGE free list
* @idx: index of buffer to recycle
*
* Recycles the specified buffer on the given free list by adding it at
* the next available slot on the list.
*/
static void recycle_rx_buf(struct adapter *adap, struct sge_fl *q,
unsigned int idx)
{
struct rx_desc *from = &q->desc[idx];
struct rx_desc *to = &q->desc[q->pidx];
q->sdesc[q->pidx] = q->sdesc[idx];
to->addr_lo = from->addr_lo; /* already big endian */
to->addr_hi = from->addr_hi; /* likewise */
wmb();
to->len_gen = cpu_to_be32(V_FLD_GEN1(q->gen));
to->gen2 = cpu_to_be32(V_FLD_GEN2(q->gen));
q->credits++;
if (++q->pidx == q->size) {
q->pidx = 0;
q->gen ^= 1;
}
t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id));
}
/**
* alloc_ring - allocate resources for an SGE descriptor ring
* @pdev: the PCI device
* @nelem: the number of descriptors
* @elem_size: the size of each descriptor
* @sw_size: the size of the SW state associated with each ring element
* @phys: the physical address of the allocated ring
* @metadata: address of the array holding the SW state for the ring
*
* Allocates resources for an SGE descriptor ring, such as Tx queues,
* free buffer lists, or response queues. Each SGE ring requires
* space for its HW descriptors plus, optionally, space for the SW state
* associated with each HW entry (the metadata). The function returns
* three values: the virtual address for the HW ring (the return value
* of the function), the physical address of the HW ring, and the address
* of the SW ring.
*/
static void *alloc_ring(struct pci_dev *pdev, size_t nelem, size_t elem_size,
size_t sw_size, dma_addr_t * phys, void *metadata)
{
size_t len = nelem * elem_size;
void *s = NULL;
void *p = dma_alloc_coherent(&pdev->dev, len, phys, GFP_KERNEL);
if (!p)
return NULL;
if (sw_size) {
s = kcalloc(nelem, sw_size, GFP_KERNEL);
if (!s) {
dma_free_coherent(&pdev->dev, len, p, *phys);
return NULL;
}
}
if (metadata)
*(void **)metadata = s;
memset(p, 0, len);
return p;
}
/**
* free_qset - free the resources of an SGE queue set
* @adapter: the adapter owning the queue set
* @q: the queue set
*
* Release the HW and SW resources associated with an SGE queue set, such
* as HW contexts, packet buffers, and descriptor rings. Traffic to the
* queue set must be quiesced prior to calling this.
*/
static void t3_free_qset(struct adapter *adapter, struct sge_qset *q)
{
int i;
struct pci_dev *pdev = adapter->pdev;
if (q->tx_reclaim_timer.function)
del_timer_sync(&q->tx_reclaim_timer);
for (i = 0; i < SGE_RXQ_PER_SET; ++i)
if (q->fl[i].desc) {
spin_lock_irq(&adapter->sge.reg_lock);
t3_sge_disable_fl(adapter, q->fl[i].cntxt_id);
spin_unlock_irq(&adapter->sge.reg_lock);
free_rx_bufs(pdev, &q->fl[i]);
kfree(q->fl[i].sdesc);
dma_free_coherent(&pdev->dev,
q->fl[i].size *
sizeof(struct rx_desc), q->fl[i].desc,
q->fl[i].phys_addr);
}
for (i = 0; i < SGE_TXQ_PER_SET; ++i)
if (q->txq[i].desc) {
spin_lock_irq(&adapter->sge.reg_lock);
t3_sge_enable_ecntxt(adapter, q->txq[i].cntxt_id, 0);
spin_unlock_irq(&adapter->sge.reg_lock);
if (q->txq[i].sdesc) {
free_tx_desc(adapter, &q->txq[i],
q->txq[i].in_use);
kfree(q->txq[i].sdesc);
}
dma_free_coherent(&pdev->dev,
q->txq[i].size *
sizeof(struct tx_desc),
q->txq[i].desc, q->txq[i].phys_addr);
__skb_queue_purge(&q->txq[i].sendq);
}
if (q->rspq.desc) {
spin_lock_irq(&adapter->sge.reg_lock);
t3_sge_disable_rspcntxt(adapter, q->rspq.cntxt_id);
spin_unlock_irq(&adapter->sge.reg_lock);
dma_free_coherent(&pdev->dev,
q->rspq.size * sizeof(struct rsp_desc),
q->rspq.desc, q->rspq.phys_addr);
}
memset(q, 0, sizeof(*q));
}
/**
* init_qset_cntxt - initialize an SGE queue set context info
* @qs: the queue set
* @id: the queue set id
*
* Initializes the TIDs and context ids for the queues of a queue set.
*/
static void init_qset_cntxt(struct sge_qset *qs, unsigned int id)
{
qs->rspq.cntxt_id = id;
qs->fl[0].cntxt_id = 2 * id;
qs->fl[1].cntxt_id = 2 * id + 1;
qs->txq[TXQ_ETH].cntxt_id = FW_TUNNEL_SGEEC_START + id;
qs->txq[TXQ_ETH].token = FW_TUNNEL_TID_START + id;
qs->txq[TXQ_OFLD].cntxt_id = FW_OFLD_SGEEC_START + id;
qs->txq[TXQ_CTRL].cntxt_id = FW_CTRL_SGEEC_START + id;
qs->txq[TXQ_CTRL].token = FW_CTRL_TID_START + id;
}
/**
* sgl_len - calculates the size of an SGL of the given capacity
* @n: the number of SGL entries
*
* Calculates the number of flits needed for a scatter/gather list that
* can hold the given number of entries.
*/
static inline unsigned int sgl_len(unsigned int n)
{
/* alternatively: 3 * (n / 2) + 2 * (n & 1) */
return (3 * n) / 2 + (n & 1);
}
/**
* flits_to_desc - returns the num of Tx descriptors for the given flits
* @n: the number of flits
*
* Calculates the number of Tx descriptors needed for the supplied number
* of flits.
*/
static inline unsigned int flits_to_desc(unsigned int n)
{
BUG_ON(n >= ARRAY_SIZE(flit_desc_map));
return flit_desc_map[n];
}
/**
* get_packet - return the next ingress packet buffer from a free list
* @adap: the adapter that received the packet
* @fl: the SGE free list holding the packet
* @len: the packet length including any SGE padding
* @drop_thres: # of remaining buffers before we start dropping packets
*
* Get the next packet from a free list and complete setup of the
* sk_buff. If the packet is small we make a copy and recycle the
* original buffer, otherwise we use the original buffer itself. If a
* positive drop threshold is supplied packets are dropped and their
* buffers recycled if (a) the number of remaining buffers is under the
* threshold and the packet is too big to copy, or (b) the packet should
* be copied but there is no memory for the copy.
*/
static struct sk_buff *get_packet(struct adapter *adap, struct sge_fl *fl,
unsigned int len, unsigned int drop_thres)
{
struct sk_buff *skb = NULL;
struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
prefetch(sd->skb->data);
fl->credits--;
if (len <= SGE_RX_COPY_THRES) {
skb = alloc_skb(len, GFP_ATOMIC);
if (likely(skb != NULL)) {
__skb_put(skb, len);
pci_dma_sync_single_for_cpu(adap->pdev,
pci_unmap_addr(sd, dma_addr), len,
PCI_DMA_FROMDEVICE);
memcpy(skb->data, sd->skb->data, len);
pci_dma_sync_single_for_device(adap->pdev,
pci_unmap_addr(sd, dma_addr), len,
PCI_DMA_FROMDEVICE);
} else if (!drop_thres)
goto use_orig_buf;
recycle:
recycle_rx_buf(adap, fl, fl->cidx);
return skb;
}
if (unlikely(fl->credits < drop_thres))
goto recycle;
use_orig_buf:
pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
fl->buf_size, PCI_DMA_FROMDEVICE);
skb = sd->skb;
skb_put(skb, len);
__refill_fl(adap, fl);
return skb;
}
/**
* get_packet_pg - return the next ingress packet buffer from a free list
* @adap: the adapter that received the packet
* @fl: the SGE free list holding the packet
* @len: the packet length including any SGE padding
* @drop_thres: # of remaining buffers before we start dropping packets
*
* Get the next packet from a free list populated with page chunks.
* If the packet is small we make a copy and recycle the original buffer,
* otherwise we attach the original buffer as a page fragment to a fresh
* sk_buff. If a positive drop threshold is supplied packets are dropped
* and their buffers recycled if (a) the number of remaining buffers is
* under the threshold and the packet is too big to copy, or (b) there's
* no system memory.
*
* Note: this function is similar to @get_packet but deals with Rx buffers
* that are page chunks rather than sk_buffs.
*/
static struct sk_buff *get_packet_pg(struct adapter *adap, struct sge_fl *fl,
unsigned int len, unsigned int drop_thres)
{
struct sk_buff *skb = NULL;
struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
if (len <= SGE_RX_COPY_THRES) {
skb = alloc_skb(len, GFP_ATOMIC);
if (likely(skb != NULL)) {
__skb_put(skb, len);
pci_dma_sync_single_for_cpu(adap->pdev,
pci_unmap_addr(sd, dma_addr), len,
PCI_DMA_FROMDEVICE);
memcpy(skb->data, sd->pg_chunk.va, len);
pci_dma_sync_single_for_device(adap->pdev,
pci_unmap_addr(sd, dma_addr), len,
PCI_DMA_FROMDEVICE);
} else if (!drop_thres)
return NULL;
recycle:
fl->credits--;
recycle_rx_buf(adap, fl, fl->cidx);
return skb;
}
if (unlikely(fl->credits <= drop_thres))
goto recycle;
skb = alloc_skb(SGE_RX_PULL_LEN, GFP_ATOMIC);
if (unlikely(!skb)) {
if (!drop_thres)
return NULL;
goto recycle;
}
pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
fl->buf_size, PCI_DMA_FROMDEVICE);
__skb_put(skb, SGE_RX_PULL_LEN);
memcpy(skb->data, sd->pg_chunk.va, SGE_RX_PULL_LEN);
skb_fill_page_desc(skb, 0, sd->pg_chunk.page,
sd->pg_chunk.offset + SGE_RX_PULL_LEN,
len - SGE_RX_PULL_LEN);
skb->len = len;
skb->data_len = len - SGE_RX_PULL_LEN;
skb->truesize += skb->data_len;
fl->credits--;
/*
* We do not refill FLs here, we let the caller do it to overlap a
* prefetch.
*/
return skb;
}
/**
* get_imm_packet - return the next ingress packet buffer from a response
* @resp: the response descriptor containing the packet data
*
* Return a packet containing the immediate data of the given response.
*/
static inline struct sk_buff *get_imm_packet(const struct rsp_desc *resp)
{
struct sk_buff *skb = alloc_skb(IMMED_PKT_SIZE, GFP_ATOMIC);
if (skb) {
__skb_put(skb, IMMED_PKT_SIZE);
skb_copy_to_linear_data(skb, resp->imm_data, IMMED_PKT_SIZE);
}
return skb;
}
/**
* calc_tx_descs - calculate the number of Tx descriptors for a packet
* @skb: the packet
*
* Returns the number of Tx descriptors needed for the given Ethernet
* packet. Ethernet packets require addition of WR and CPL headers.
*/
static inline unsigned int calc_tx_descs(const struct sk_buff *skb)
{
unsigned int flits;
if (skb->len <= WR_LEN - sizeof(struct cpl_tx_pkt))
return 1;
flits = sgl_len(skb_shinfo(skb)->nr_frags + 1) + 2;
if (skb_shinfo(skb)->gso_size)
flits++;
return flits_to_desc(flits);
}
/**
* make_sgl - populate a scatter/gather list for a packet
* @skb: the packet
* @sgp: the SGL to populate
* @start: start address of skb main body data to include in the SGL
* @len: length of skb main body data to include in the SGL
* @pdev: the PCI device
*
* Generates a scatter/gather list for the buffers that make up a packet
* and returns the SGL size in 8-byte words. The caller must size the SGL
* appropriately.
*/
static inline unsigned int make_sgl(const struct sk_buff *skb,
struct sg_ent *sgp, unsigned char *start,
unsigned int len, struct pci_dev *pdev)
{
dma_addr_t mapping;
unsigned int i, j = 0, nfrags;
if (len) {
mapping = pci_map_single(pdev, start, len, PCI_DMA_TODEVICE);
sgp->len[0] = cpu_to_be32(len);
sgp->addr[0] = cpu_to_be64(mapping);
j = 1;
}
nfrags = skb_shinfo(skb)->nr_frags;
for (i = 0; i < nfrags; i++) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
mapping = pci_map_page(pdev, frag->page, frag->page_offset,
frag->size, PCI_DMA_TODEVICE);
sgp->len[j] = cpu_to_be32(frag->size);
sgp->addr[j] = cpu_to_be64(mapping);
j ^= 1;
if (j == 0)
++sgp;
}
if (j)
sgp->len[j] = 0;
return ((nfrags + (len != 0)) * 3) / 2 + j;
}
/**
* check_ring_tx_db - check and potentially ring a Tx queue's doorbell
* @adap: the adapter
* @q: the Tx queue
*
* Ring the doorbel if a Tx queue is asleep. There is a natural race,
* where the HW is going to sleep just after we checked, however,
* then the interrupt handler will detect the outstanding TX packet
* and ring the doorbell for us.
*
* When GTS is disabled we unconditionally ring the doorbell.
*/
static inline void check_ring_tx_db(struct adapter *adap, struct sge_txq *q)
{
#if USE_GTS
clear_bit(TXQ_LAST_PKT_DB, &q->flags);
if (test_and_set_bit(TXQ_RUNNING, &q->flags) == 0) {
set_bit(TXQ_LAST_PKT_DB, &q->flags);
t3_write_reg(adap, A_SG_KDOORBELL,
F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
}
#else
wmb(); /* write descriptors before telling HW */
t3_write_reg(adap, A_SG_KDOORBELL,
F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
#endif
}
static inline void wr_gen2(struct tx_desc *d, unsigned int gen)
{
#if SGE_NUM_GENBITS == 2
d->flit[TX_DESC_FLITS - 1] = cpu_to_be64(gen);
#endif
}
/**
* write_wr_hdr_sgl - write a WR header and, optionally, SGL
* @ndesc: number of Tx descriptors spanned by the SGL
* @skb: the packet corresponding to the WR
* @d: first Tx descriptor to be written
* @pidx: index of above descriptors
* @q: the SGE Tx queue
* @sgl: the SGL
* @flits: number of flits to the start of the SGL in the first descriptor
* @sgl_flits: the SGL size in flits
* @gen: the Tx descriptor generation
* @wr_hi: top 32 bits of WR header based on WR type (big endian)
* @wr_lo: low 32 bits of WR header based on WR type (big endian)
*
* Write a work request header and an associated SGL. If the SGL is
* small enough to fit into one Tx descriptor it has already been written
* and we just need to write the WR header. Otherwise we distribute the
* SGL across the number of descriptors it spans.
*/
static void write_wr_hdr_sgl(unsigned int ndesc, struct sk_buff *skb,
struct tx_desc *d, unsigned int pidx,
const struct sge_txq *q,
const struct sg_ent *sgl,
unsigned int flits, unsigned int sgl_flits,
unsigned int gen, __be32 wr_hi,
__be32 wr_lo)
{
struct work_request_hdr *wrp = (struct work_request_hdr *)d;
struct tx_sw_desc *sd = &q->sdesc[pidx];
sd->skb = skb;
if (need_skb_unmap()) {
sd->fragidx = 0;
sd->addr_idx = 0;
sd->sflit = flits;
}
if (likely(ndesc == 1)) {
sd->eop = 1;
wrp->wr_hi = htonl(F_WR_SOP | F_WR_EOP | V_WR_DATATYPE(1) |
V_WR_SGLSFLT(flits)) | wr_hi;
wmb();
wrp->wr_lo = htonl(V_WR_LEN(flits + sgl_flits) |
V_WR_GEN(gen)) | wr_lo;
wr_gen2(d, gen);
} else {
unsigned int ogen = gen;
const u64 *fp = (const u64 *)sgl;
struct work_request_hdr *wp = wrp;
wrp->wr_hi = htonl(F_WR_SOP | V_WR_DATATYPE(1) |
V_WR_SGLSFLT(flits)) | wr_hi;
while (sgl_flits) {
unsigned int avail = WR_FLITS - flits;
if (avail > sgl_flits)
avail = sgl_flits;
memcpy(&d->flit[flits], fp, avail * sizeof(*fp));
sgl_flits -= avail;
ndesc--;
if (!sgl_flits)
break;
fp += avail;
d++;
sd->eop = 0;
sd++;
if (++pidx == q->size) {
pidx = 0;
gen ^= 1;
d = q->desc;
sd = q->sdesc;
}
sd->skb = skb;
wrp = (struct work_request_hdr *)d;
wrp->wr_hi = htonl(V_WR_DATATYPE(1) |
V_WR_SGLSFLT(1)) | wr_hi;
wrp->wr_lo = htonl(V_WR_LEN(min(WR_FLITS,
sgl_flits + 1)) |
V_WR_GEN(gen)) | wr_lo;
wr_gen2(d, gen);
flits = 1;
}
sd->eop = 1;
wrp->wr_hi |= htonl(F_WR_EOP);
wmb();
wp->wr_lo = htonl(V_WR_LEN(WR_FLITS) | V_WR_GEN(ogen)) | wr_lo;
wr_gen2((struct tx_desc *)wp, ogen);
WARN_ON(ndesc != 0);
}
}
/**
* write_tx_pkt_wr - write a TX_PKT work request
* @adap: the adapter
* @skb: the packet to send
* @pi: the egress interface
* @pidx: index of the first Tx descriptor to write
* @gen: the generation value to use
* @q: the Tx queue
* @ndesc: number of descriptors the packet will occupy
* @compl: the value of the COMPL bit to use
*
* Generate a TX_PKT work request to send the supplied packet.
*/
static void write_tx_pkt_wr(struct adapter *adap, struct sk_buff *skb,
const struct port_info *pi,
unsigned int pidx, unsigned int gen,
struct sge_txq *q, unsigned int ndesc,
unsigned int compl)
{
unsigned int flits, sgl_flits, cntrl, tso_info;
struct sg_ent *sgp, sgl[MAX_SKB_FRAGS / 2 + 1];
struct tx_desc *d = &q->desc[pidx];
struct cpl_tx_pkt *cpl = (struct cpl_tx_pkt *)d;
cpl->len = htonl(skb->len | 0x80000000);
cntrl = V_TXPKT_INTF(pi->port_id);
if (vlan_tx_tag_present(skb) && pi->vlan_grp)
cntrl |= F_TXPKT_VLAN_VLD | V_TXPKT_VLAN(vlan_tx_tag_get(skb));
tso_info = V_LSO_MSS(skb_shinfo(skb)->gso_size);
if (tso_info) {
int eth_type;
struct cpl_tx_pkt_lso *hdr = (struct cpl_tx_pkt_lso *)cpl;
d->flit[2] = 0;
cntrl |= V_TXPKT_OPCODE(CPL_TX_PKT_LSO);
hdr->cntrl = htonl(cntrl);
eth_type = skb_network_offset(skb) == ETH_HLEN ?
CPL_ETH_II : CPL_ETH_II_VLAN;
tso_info |= V_LSO_ETH_TYPE(eth_type) |
V_LSO_IPHDR_WORDS(ip_hdr(skb)->ihl) |
V_LSO_TCPHDR_WORDS(tcp_hdr(skb)->doff);
hdr->lso_info = htonl(tso_info);
flits = 3;
} else {
cntrl |= V_TXPKT_OPCODE(CPL_TX_PKT);
cntrl |= F_TXPKT_IPCSUM_DIS; /* SW calculates IP csum */
cntrl |= V_TXPKT_L4CSUM_DIS(skb->ip_summed != CHECKSUM_PARTIAL);
cpl->cntrl = htonl(cntrl);
if (skb->len <= WR_LEN - sizeof(*cpl)) {
q->sdesc[pidx].skb = NULL;
if (!skb->data_len)
skb_copy_from_linear_data(skb, &d->flit[2],
skb->len);
else
skb_copy_bits(skb, 0, &d->flit[2], skb->len);
flits = (skb->len + 7) / 8 + 2;
cpl->wr.wr_hi = htonl(V_WR_BCNTLFLT(skb->len & 7) |
V_WR_OP(FW_WROPCODE_TUNNEL_TX_PKT)
| F_WR_SOP | F_WR_EOP | compl);
wmb();
cpl->wr.wr_lo = htonl(V_WR_LEN(flits) | V_WR_GEN(gen) |
V_WR_TID(q->token));
wr_gen2(d, gen);
kfree_skb(skb);
return;
}
flits = 2;
}
sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl;
sgl_flits = make_sgl(skb, sgp, skb->data, skb_headlen(skb), adap->pdev);
write_wr_hdr_sgl(ndesc, skb, d, pidx, q, sgl, flits, sgl_flits, gen,
htonl(V_WR_OP(FW_WROPCODE_TUNNEL_TX_PKT) | compl),
htonl(V_WR_TID(q->token)));
}
static inline void t3_stop_queue(struct net_device *dev, struct sge_qset *qs,
struct sge_txq *q)
{
netif_stop_queue(dev);
set_bit(TXQ_ETH, &qs->txq_stopped);
q->stops++;
}
/**
* eth_xmit - add a packet to the Ethernet Tx queue
* @skb: the packet
* @dev: the egress net device
*
* Add a packet to an SGE Tx queue. Runs with softirqs disabled.
*/
int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
{
unsigned int ndesc, pidx, credits, gen, compl;
const struct port_info *pi = netdev_priv(dev);
struct adapter *adap = pi->adapter;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
struct sge_qset *qs = pi->qs;
struct sge_txq *q = &qs->txq[TXQ_ETH];
/*
* The chip min packet length is 9 octets but play safe and reject
* anything shorter than an Ethernet header.
*/
if (unlikely(skb->len < ETH_HLEN)) {
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
spin_lock(&q->lock);
reclaim_completed_tx(adap, q);
credits = q->size - q->in_use;
ndesc = calc_tx_descs(skb);
if (unlikely(credits < ndesc)) {
t3_stop_queue(dev, qs, q);
dev_err(&adap->pdev->dev,
"%s: Tx ring %u full while queue awake!\n",
dev->name, q->cntxt_id & 7);
spin_unlock(&q->lock);
return NETDEV_TX_BUSY;
}
q->in_use += ndesc;
if (unlikely(credits - ndesc < q->stop_thres)) {
t3_stop_queue(dev, qs, q);
if (should_restart_tx(q) &&
test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) {
q->restarts++;
netif_wake_queue(dev);
}
}
gen = q->gen;
q->unacked += ndesc;
compl = (q->unacked & 8) << (S_WR_COMPL - 3);
q->unacked &= 7;
pidx = q->pidx;
q->pidx += ndesc;
if (q->pidx >= q->size) {
q->pidx -= q->size;
q->gen ^= 1;
}
/* update port statistics */
if (skb->ip_summed == CHECKSUM_COMPLETE)
qs->port_stats[SGE_PSTAT_TX_CSUM]++;
if (skb_shinfo(skb)->gso_size)
qs->port_stats[SGE_PSTAT_TSO]++;
if (vlan_tx_tag_present(skb) && pi->vlan_grp)
qs->port_stats[SGE_PSTAT_VLANINS]++;
dev->trans_start = jiffies;
spin_unlock(&q->lock);
/*
* We do not use Tx completion interrupts to free DMAd Tx packets.
* This is good for performamce but means that we rely on new Tx
* packets arriving to run the destructors of completed packets,
* which open up space in their sockets' send queues. Sometimes
* we do not get such new packets causing Tx to stall. A single
* UDP transmitter is a good example of this situation. We have
* a clean up timer that periodically reclaims completed packets
* but it doesn't run often enough (nor do we want it to) to prevent
* lengthy stalls. A solution to this problem is to run the
* destructor early, after the packet is queued but before it's DMAd.
* A cons is that we lie to socket memory accounting, but the amount
* of extra memory is reasonable (limited by the number of Tx
* descriptors), the packets do actually get freed quickly by new
* packets almost always, and for protocols like TCP that wait for
* acks to really free up the data the extra memory is even less.
* On the positive side we run the destructors on the sending CPU
* rather than on a potentially different completing CPU, usually a
* good thing. We also run them without holding our Tx queue lock,
* unlike what reclaim_completed_tx() would otherwise do.
*
* Run the destructor before telling the DMA engine about the packet
* to make sure it doesn't complete and get freed prematurely.
*/
if (likely(!skb_shared(skb)))
skb_orphan(skb);
write_tx_pkt_wr(adap, skb, pi, pidx, gen, q, ndesc, compl);
check_ring_tx_db(adap, q);
return NETDEV_TX_OK;
}
/**
* write_imm - write a packet into a Tx descriptor as immediate data
* @d: the Tx descriptor to write
* @skb: the packet
* @len: the length of packet data to write as immediate data
* @gen: the generation bit value to write
*
* Writes a packet as immediate data into a Tx descriptor. The packet
* contains a work request at its beginning. We must write the packet
* carefully so the SGE doesn't read it accidentally before it's written
* in its entirety.
*/
static inline void write_imm(struct tx_desc *d, struct sk_buff *skb,
unsigned int len, unsigned int gen)
{
struct work_request_hdr *from = (struct work_request_hdr *)skb->data;
struct work_request_hdr *to = (struct work_request_hdr *)d;
if (likely(!skb->data_len))
memcpy(&to[1], &from[1], len - sizeof(*from));
else
skb_copy_bits(skb, sizeof(*from), &to[1], len - sizeof(*from));
to->wr_hi = from->wr_hi | htonl(F_WR_SOP | F_WR_EOP |
V_WR_BCNTLFLT(len & 7));
wmb();
to->wr_lo = from->wr_lo | htonl(V_WR_GEN(gen) |
V_WR_LEN((len + 7) / 8));
wr_gen2(d, gen);
kfree_skb(skb);
}
/**
* check_desc_avail - check descriptor availability on a send queue
* @adap: the adapter
* @q: the send queue
* @skb: the packet needing the descriptors
* @ndesc: the number of Tx descriptors needed
* @qid: the Tx queue number in its queue set (TXQ_OFLD or TXQ_CTRL)
*
* Checks if the requested number of Tx descriptors is available on an
* SGE send queue. If the queue is already suspended or not enough
* descriptors are available the packet is queued for later transmission.
* Must be called with the Tx queue locked.
*
* Returns 0 if enough descriptors are available, 1 if there aren't
* enough descriptors and the packet has been queued, and 2 if the caller
* needs to retry because there weren't enough descriptors at the
* beginning of the call but some freed up in the mean time.
*/
static inline int check_desc_avail(struct adapter *adap, struct sge_txq *q,
struct sk_buff *skb, unsigned int ndesc,
unsigned int qid)
{
if (unlikely(!skb_queue_empty(&q->sendq))) {
addq_exit:__skb_queue_tail(&q->sendq, skb);
return 1;
}
if (unlikely(q->size - q->in_use < ndesc)) {
struct sge_qset *qs = txq_to_qset(q, qid);
set_bit(qid, &qs->txq_stopped);
smp_mb__after_clear_bit();
if (should_restart_tx(q) &&
test_and_clear_bit(qid, &qs->txq_stopped))
return 2;
q->stops++;
goto addq_exit;
}
return 0;
}
/**
* reclaim_completed_tx_imm - reclaim completed control-queue Tx descs
* @q: the SGE control Tx queue
*
* This is a variant of reclaim_completed_tx() that is used for Tx queues
* that send only immediate data (presently just the control queues) and
* thus do not have any sk_buffs to release.
*/
static inline void reclaim_completed_tx_imm(struct sge_txq *q)
{
unsigned int reclaim = q->processed - q->cleaned;
q->in_use -= reclaim;
q->cleaned += reclaim;
}
static inline int immediate(const struct sk_buff *skb)
{
return skb->len <= WR_LEN;
}
/**
* ctrl_xmit - send a packet through an SGE control Tx queue
* @adap: the adapter
* @q: the control queue
* @skb: the packet
*
* Send a packet through an SGE control Tx queue. Packets sent through
* a control queue must fit entirely as immediate data in a single Tx
* descriptor and have no page fragments.
*/
static int ctrl_xmit(struct adapter *adap, struct sge_txq *q,
struct sk_buff *skb)
{
int ret;
struct work_request_hdr *wrp = (struct work_request_hdr *)skb->data;
if (unlikely(!immediate(skb))) {
WARN_ON(1);
dev_kfree_skb(skb);
return NET_XMIT_SUCCESS;
}
wrp->wr_hi |= htonl(F_WR_SOP | F_WR_EOP);
wrp->wr_lo = htonl(V_WR_TID(q->token));
spin_lock(&q->lock);
again:reclaim_completed_tx_imm(q);
ret = check_desc_avail(adap, q, skb, 1, TXQ_CTRL);
if (unlikely(ret)) {
if (ret == 1) {
spin_unlock(&q->lock);
return NET_XMIT_CN;
}
goto again;
}
write_imm(&q->desc[q->pidx], skb, skb->len, q->gen);
q->in_use++;
if (++q->pidx >= q->size) {
q->pidx = 0;
q->gen ^= 1;
}
spin_unlock(&q->lock);
wmb();
t3_write_reg(adap, A_SG_KDOORBELL,
F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
return NET_XMIT_SUCCESS;
}
/**
* restart_ctrlq - restart a suspended control queue
* @qs: the queue set cotaining the control queue
*
* Resumes transmission on a suspended Tx control queue.
*/
static void restart_ctrlq(unsigned long data)
{
struct sk_buff *skb;
struct sge_qset *qs = (struct sge_qset *)data;
struct sge_txq *q = &qs->txq[TXQ_CTRL];
spin_lock(&q->lock);
again:reclaim_completed_tx_imm(q);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
while (q->in_use < q->size &&
(skb = __skb_dequeue(&q->sendq)) != NULL) {
write_imm(&q->desc[q->pidx], skb, skb->len, q->gen);
if (++q->pidx >= q->size) {
q->pidx = 0;
q->gen ^= 1;
}
q->in_use++;
}
if (!skb_queue_empty(&q->sendq)) {
set_bit(TXQ_CTRL, &qs->txq_stopped);
smp_mb__after_clear_bit();
if (should_restart_tx(q) &&
test_and_clear_bit(TXQ_CTRL, &qs->txq_stopped))
goto again;
q->stops++;
}
spin_unlock(&q->lock);
wmb();
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
t3_write_reg(qs->adap, A_SG_KDOORBELL,
F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
}
/*
* Send a management message through control queue 0
*/
int t3_mgmt_tx(struct adapter *adap, struct sk_buff *skb)
{
int ret;
local_bh_disable();
ret = ctrl_xmit(adap, &adap->sge.qs[0].txq[TXQ_CTRL], skb);
local_bh_enable();
return ret;
}
/**
* deferred_unmap_destructor - unmap a packet when it is freed
* @skb: the packet
*
* This is the packet destructor used for Tx packets that need to remain
* mapped until they are freed rather than until their Tx descriptors are
* freed.
*/
static void deferred_unmap_destructor(struct sk_buff *skb)
{
int i;
const dma_addr_t *p;
const struct skb_shared_info *si;
const struct deferred_unmap_info *dui;
dui = (struct deferred_unmap_info *)skb->head;
p = dui->addr;
if (skb->tail - skb->transport_header)
pci_unmap_single(dui->pdev, *p++,
skb->tail - skb->transport_header,
PCI_DMA_TODEVICE);
si = skb_shinfo(skb);
for (i = 0; i < si->nr_frags; i++)
pci_unmap_page(dui->pdev, *p++, si->frags[i].size,
PCI_DMA_TODEVICE);
}
static void setup_deferred_unmapping(struct sk_buff *skb, struct pci_dev *pdev,
const struct sg_ent *sgl, int sgl_flits)
{
dma_addr_t *p;
struct deferred_unmap_info *dui;
dui = (struct deferred_unmap_info *)skb->head;
dui->pdev = pdev;
for (p = dui->addr; sgl_flits >= 3; sgl++, sgl_flits -= 3) {
*p++ = be64_to_cpu(sgl->addr[0]);
*p++ = be64_to_cpu(sgl->addr[1]);
}
if (sgl_flits)
*p = be64_to_cpu(sgl->addr[0]);
}
/**
* write_ofld_wr - write an offload work request
* @adap: the adapter
* @skb: the packet to send
* @q: the Tx queue
* @pidx: index of the first Tx descriptor to write
* @gen: the generation value to use
* @ndesc: number of descriptors the packet will occupy
*
* Write an offload work request to send the supplied packet. The packet
* data already carry the work request with most fields populated.
*/
static void write_ofld_wr(struct adapter *adap, struct sk_buff *skb,
struct sge_txq *q, unsigned int pidx,
unsigned int gen, unsigned int ndesc)
{
unsigned int sgl_flits, flits;
struct work_request_hdr *from;
struct sg_ent *sgp, sgl[MAX_SKB_FRAGS / 2 + 1];
struct tx_desc *d = &q->desc[pidx];
if (immediate(skb)) {
q->sdesc[pidx].skb = NULL;
write_imm(d, skb, skb->len, gen);
return;
}
/* Only TX_DATA builds SGLs */
from = (struct work_request_hdr *)skb->data;
memcpy(&d->flit[1], &from[1],
skb_transport_offset(skb) - sizeof(*from));
flits = skb_transport_offset(skb) / 8;
sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl;
sgl_flits = make_sgl(skb, sgp, skb_transport_header(skb),
skb->tail - skb->transport_header,
adap->pdev);
if (need_skb_unmap()) {
setup_deferred_unmapping(skb, adap->pdev, sgp, sgl_flits);
skb->destructor = deferred_unmap_destructor;
}
write_wr_hdr_sgl(ndesc, skb, d, pidx, q, sgl, flits, sgl_flits,
gen, from->wr_hi, from->wr_lo);
}
/**
* calc_tx_descs_ofld - calculate # of Tx descriptors for an offload packet
* @skb: the packet
*
* Returns the number of Tx descriptors needed for the given offload
* packet. These packets are already fully constructed.
*/
static inline unsigned int calc_tx_descs_ofld(const struct sk_buff *skb)
{
unsigned int flits, cnt;
if (skb->len <= WR_LEN)
return 1; /* packet fits as immediate data */
flits = skb_transport_offset(skb) / 8; /* headers */
cnt = skb_shinfo(skb)->nr_frags;
if (skb->tail != skb->transport_header)
cnt++;
return flits_to_desc(flits + sgl_len(cnt));
}
/**
* ofld_xmit - send a packet through an offload queue
* @adap: the adapter
* @q: the Tx offload queue
* @skb: the packet
*
* Send an offload packet through an SGE offload queue.
*/
static int ofld_xmit(struct adapter *adap, struct sge_txq *q,
struct sk_buff *skb)
{
int ret;
unsigned int ndesc = calc_tx_descs_ofld(skb), pidx, gen;
spin_lock(&q->lock);
again:reclaim_completed_tx(adap, q);
ret = check_desc_avail(adap, q, skb, ndesc, TXQ_OFLD);
if (unlikely(ret)) {
if (ret == 1) {
skb->priority = ndesc; /* save for restart */
spin_unlock(&q->lock);
return NET_XMIT_CN;
}
goto again;
}
gen = q->gen;
q->in_use += ndesc;
pidx = q->pidx;
q->pidx += ndesc;
if (q->pidx >= q->size) {
q->pidx -= q->size;
q->gen ^= 1;
}
spin_unlock(&q->lock);
write_ofld_wr(adap, skb, q, pidx, gen, ndesc);
check_ring_tx_db(adap, q);
return NET_XMIT_SUCCESS;
}
/**
* restart_offloadq - restart a suspended offload queue
* @qs: the queue set cotaining the offload queue
*
* Resumes transmission on a suspended Tx offload queue.
*/
static void restart_offloadq(unsigned long data)
{
struct sk_buff *skb;
struct sge_qset *qs = (struct sge_qset *)data;
struct sge_txq *q = &qs->txq[TXQ_OFLD];
const struct port_info *pi = netdev_priv(qs->netdev);
struct adapter *adap = pi->adapter;
spin_lock(&q->lock);
again:reclaim_completed_tx(adap, q);
while ((skb = skb_peek(&q->sendq)) != NULL) {
unsigned int gen, pidx;
unsigned int ndesc = skb->priority;
if (unlikely(q->size - q->in_use < ndesc)) {
set_bit(TXQ_OFLD, &qs->txq_stopped);
smp_mb__after_clear_bit();
if (should_restart_tx(q) &&
test_and_clear_bit(TXQ_OFLD, &qs->txq_stopped))
goto again;
q->stops++;
break;
}
gen = q->gen;
q->in_use += ndesc;
pidx = q->pidx;
q->pidx += ndesc;
if (q->pidx >= q->size) {
q->pidx -= q->size;
q->gen ^= 1;
}
__skb_unlink(skb, &q->sendq);
spin_unlock(&q->lock);
write_ofld_wr(adap, skb, q, pidx, gen, ndesc);
spin_lock(&q->lock);
}
spin_unlock(&q->lock);
#if USE_GTS
set_bit(TXQ_RUNNING, &q->flags);
set_bit(TXQ_LAST_PKT_DB, &q->flags);
#endif
wmb();
t3_write_reg(adap, A_SG_KDOORBELL,
F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
}
/**
* queue_set - return the queue set a packet should use
* @skb: the packet
*
* Maps a packet to the SGE queue set it should use. The desired queue
* set is carried in bits 1-3 in the packet's priority.
*/
static inline int queue_set(const struct sk_buff *skb)
{
return skb->priority >> 1;
}
/**
* is_ctrl_pkt - return whether an offload packet is a control packet
* @skb: the packet
*
* Determines whether an offload packet should use an OFLD or a CTRL
* Tx queue. This is indicated by bit 0 in the packet's priority.
*/
static inline int is_ctrl_pkt(const struct sk_buff *skb)
{
return skb->priority & 1;
}
/**
* t3_offload_tx - send an offload packet
* @tdev: the offload device to send to
* @skb: the packet
*
* Sends an offload packet. We use the packet priority to select the
* appropriate Tx queue as follows: bit 0 indicates whether the packet
* should be sent as regular or control, bits 1-3 select the queue set.
*/
int t3_offload_tx(struct t3cdev *tdev, struct sk_buff *skb)
{
struct adapter *adap = tdev2adap(tdev);
struct sge_qset *qs = &adap->sge.qs[queue_set(skb)];
if (unlikely(is_ctrl_pkt(skb)))
return ctrl_xmit(adap, &qs->txq[TXQ_CTRL], skb);
return ofld_xmit(adap, &qs->txq[TXQ_OFLD], skb);
}
/**
* offload_enqueue - add an offload packet to an SGE offload receive queue
* @q: the SGE response queue
* @skb: the packet
*
* Add a new offload packet to an SGE response queue's offload packet
* queue. If the packet is the first on the queue it schedules the RX
* softirq to process the queue.
*/
static inline void offload_enqueue(struct sge_rspq *q, struct sk_buff *skb)
{
skb->next = skb->prev = NULL;
if (q->rx_tail)
q->rx_tail->next = skb;
else {
struct sge_qset *qs = rspq_to_qset(q);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
napi_schedule(&qs->napi);
q->rx_head = skb;
}
q->rx_tail = skb;
}
/**
* deliver_partial_bundle - deliver a (partial) bundle of Rx offload pkts
* @tdev: the offload device that will be receiving the packets
* @q: the SGE response queue that assembled the bundle
* @skbs: the partial bundle
* @n: the number of packets in the bundle
*
* Delivers a (partial) bundle of Rx offload packets to an offload device.
*/
static inline void deliver_partial_bundle(struct t3cdev *tdev,
struct sge_rspq *q,
struct sk_buff *skbs[], int n)
{
if (n) {
q->offload_bundles++;
tdev->recv(tdev, skbs, n);
}
}
/**
* ofld_poll - NAPI handler for offload packets in interrupt mode
* @dev: the network device doing the polling
* @budget: polling budget
*
* The NAPI handler for offload packets when a response queue is serviced
* by the hard interrupt handler, i.e., when it's operating in non-polling
* mode. Creates small packet batches and sends them through the offload
* receive handler. Batches need to be of modest size as we do prefetches
* on the packets in each.
*/
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
static int ofld_poll(struct napi_struct *napi, int budget)
{
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
struct sge_qset *qs = container_of(napi, struct sge_qset, napi);
struct sge_rspq *q = &qs->rspq;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
struct adapter *adapter = qs->adap;
int work_done = 0;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
while (work_done < budget) {
struct sk_buff *head, *tail, *skbs[RX_BUNDLE_SIZE];
int ngathered;
spin_lock_irq(&q->lock);
head = q->rx_head;
if (!head) {
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
napi_complete(napi);
spin_unlock_irq(&q->lock);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
return work_done;
}
tail = q->rx_tail;
q->rx_head = q->rx_tail = NULL;
spin_unlock_irq(&q->lock);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
for (ngathered = 0; work_done < budget && head; work_done++) {
prefetch(head->data);
skbs[ngathered] = head;
head = head->next;
skbs[ngathered]->next = NULL;
if (++ngathered == RX_BUNDLE_SIZE) {
q->offload_bundles++;
adapter->tdev.recv(&adapter->tdev, skbs,
ngathered);
ngathered = 0;
}
}
if (head) { /* splice remaining packets back onto Rx queue */
spin_lock_irq(&q->lock);
tail->next = q->rx_head;
if (!q->rx_head)
q->rx_tail = tail;
q->rx_head = head;
spin_unlock_irq(&q->lock);
}
deliver_partial_bundle(&adapter->tdev, q, skbs, ngathered);
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
return work_done;
}
/**
* rx_offload - process a received offload packet
* @tdev: the offload device receiving the packet
* @rq: the response queue that received the packet
* @skb: the packet
* @rx_gather: a gather list of packets if we are building a bundle
* @gather_idx: index of the next available slot in the bundle
*
* Process an ingress offload pakcet and add it to the offload ingress
* queue. Returns the index of the next available slot in the bundle.
*/
static inline int rx_offload(struct t3cdev *tdev, struct sge_rspq *rq,
struct sk_buff *skb, struct sk_buff *rx_gather[],
unsigned int gather_idx)
{
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
skb_reset_transport_header(skb);
if (rq->polling) {
rx_gather[gather_idx++] = skb;
if (gather_idx == RX_BUNDLE_SIZE) {
tdev->recv(tdev, rx_gather, RX_BUNDLE_SIZE);
gather_idx = 0;
rq->offload_bundles++;
}
} else
offload_enqueue(rq, skb);
return gather_idx;
}
/**
* restart_tx - check whether to restart suspended Tx queues
* @qs: the queue set to resume
*
* Restarts suspended Tx queues of an SGE queue set if they have enough
* free resources to resume operation.
*/
static void restart_tx(struct sge_qset *qs)
{
if (test_bit(TXQ_ETH, &qs->txq_stopped) &&
should_restart_tx(&qs->txq[TXQ_ETH]) &&
test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) {
qs->txq[TXQ_ETH].restarts++;
if (netif_running(qs->netdev))
netif_wake_queue(qs->netdev);
}
if (test_bit(TXQ_OFLD, &qs->txq_stopped) &&
should_restart_tx(&qs->txq[TXQ_OFLD]) &&
test_and_clear_bit(TXQ_OFLD, &qs->txq_stopped)) {
qs->txq[TXQ_OFLD].restarts++;
tasklet_schedule(&qs->txq[TXQ_OFLD].qresume_tsk);
}
if (test_bit(TXQ_CTRL, &qs->txq_stopped) &&
should_restart_tx(&qs->txq[TXQ_CTRL]) &&
test_and_clear_bit(TXQ_CTRL, &qs->txq_stopped)) {
qs->txq[TXQ_CTRL].restarts++;
tasklet_schedule(&qs->txq[TXQ_CTRL].qresume_tsk);
}
}
/**
* rx_eth - process an ingress ethernet packet
* @adap: the adapter
* @rq: the response queue that received the packet
* @skb: the packet
* @pad: amount of padding at the start of the buffer
*
* Process an ingress ethernet pakcet and deliver it to the stack.
* The padding is 2 if the packet was delivered in an Rx buffer and 0
* if it was immediate data in a response.
*/
static void rx_eth(struct adapter *adap, struct sge_rspq *rq,
struct sk_buff *skb, int pad)
{
struct cpl_rx_pkt *p = (struct cpl_rx_pkt *)(skb->data + pad);
struct port_info *pi;
skb_pull(skb, sizeof(*p) + pad);
skb->protocol = eth_type_trans(skb, adap->port[p->iff]);
skb->dev->last_rx = jiffies;
pi = netdev_priv(skb->dev);
if (pi->rx_csum_offload && p->csum_valid && p->csum == htons(0xffff) &&
!p->fragment) {
rspq_to_qset(rq)->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
skb->ip_summed = CHECKSUM_UNNECESSARY;
} else
skb->ip_summed = CHECKSUM_NONE;
if (unlikely(p->vlan_valid)) {
struct vlan_group *grp = pi->vlan_grp;
rspq_to_qset(rq)->port_stats[SGE_PSTAT_VLANEX]++;
if (likely(grp))
__vlan_hwaccel_rx(skb, grp, ntohs(p->vlan),
rq->polling);
else
dev_kfree_skb_any(skb);
} else if (rq->polling)
netif_receive_skb(skb);
else
netif_rx(skb);
}
/**
* handle_rsp_cntrl_info - handles control information in a response
* @qs: the queue set corresponding to the response
* @flags: the response control flags
*
* Handles the control information of an SGE response, such as GTS
* indications and completion credits for the queue set's Tx queues.
* HW coalesces credits, we don't do any extra SW coalescing.
*/
static inline void handle_rsp_cntrl_info(struct sge_qset *qs, u32 flags)
{
unsigned int credits;
#if USE_GTS
if (flags & F_RSPD_TXQ0_GTS)
clear_bit(TXQ_RUNNING, &qs->txq[TXQ_ETH].flags);
#endif
credits = G_RSPD_TXQ0_CR(flags);
if (credits)
qs->txq[TXQ_ETH].processed += credits;
credits = G_RSPD_TXQ2_CR(flags);
if (credits)
qs->txq[TXQ_CTRL].processed += credits;
# if USE_GTS
if (flags & F_RSPD_TXQ1_GTS)
clear_bit(TXQ_RUNNING, &qs->txq[TXQ_OFLD].flags);
# endif
credits = G_RSPD_TXQ1_CR(flags);
if (credits)
qs->txq[TXQ_OFLD].processed += credits;
}
/**
* check_ring_db - check if we need to ring any doorbells
* @adapter: the adapter
* @qs: the queue set whose Tx queues are to be examined
* @sleeping: indicates which Tx queue sent GTS
*
* Checks if some of a queue set's Tx queues need to ring their doorbells
* to resume transmission after idling while they still have unprocessed
* descriptors.
*/
static void check_ring_db(struct adapter *adap, struct sge_qset *qs,
unsigned int sleeping)
{
if (sleeping & F_RSPD_TXQ0_GTS) {
struct sge_txq *txq = &qs->txq[TXQ_ETH];
if (txq->cleaned + txq->in_use != txq->processed &&
!test_and_set_bit(TXQ_LAST_PKT_DB, &txq->flags)) {
set_bit(TXQ_RUNNING, &txq->flags);
t3_write_reg(adap, A_SG_KDOORBELL, F_SELEGRCNTX |
V_EGRCNTX(txq->cntxt_id));
}
}
if (sleeping & F_RSPD_TXQ1_GTS) {
struct sge_txq *txq = &qs->txq[TXQ_OFLD];
if (txq->cleaned + txq->in_use != txq->processed &&
!test_and_set_bit(TXQ_LAST_PKT_DB, &txq->flags)) {
set_bit(TXQ_RUNNING, &txq->flags);
t3_write_reg(adap, A_SG_KDOORBELL, F_SELEGRCNTX |
V_EGRCNTX(txq->cntxt_id));
}
}
}
/**
* is_new_response - check if a response is newly written
* @r: the response descriptor
* @q: the response queue
*
* Returns true if a response descriptor contains a yet unprocessed
* response.
*/
static inline int is_new_response(const struct rsp_desc *r,
const struct sge_rspq *q)
{
return (r->intr_gen & F_RSPD_GEN2) == q->gen;
}
#define RSPD_GTS_MASK (F_RSPD_TXQ0_GTS | F_RSPD_TXQ1_GTS)
#define RSPD_CTRL_MASK (RSPD_GTS_MASK | \
V_RSPD_TXQ0_CR(M_RSPD_TXQ0_CR) | \
V_RSPD_TXQ1_CR(M_RSPD_TXQ1_CR) | \
V_RSPD_TXQ2_CR(M_RSPD_TXQ2_CR))
/* How long to delay the next interrupt in case of memory shortage, in 0.1us. */
#define NOMEM_INTR_DELAY 2500
/**
* process_responses - process responses from an SGE response queue
* @adap: the adapter
* @qs: the queue set to which the response queue belongs
* @budget: how many responses can be processed in this round
*
* Process responses from an SGE response queue up to the supplied budget.
* Responses include received packets as well as credits and other events
* for the queues that belong to the response queue's queue set.
* A negative budget is effectively unlimited.
*
* Additionally choose the interrupt holdoff time for the next interrupt
* on this queue. If the system is under memory shortage use a fairly
* long delay to help recovery.
*/
static int process_responses(struct adapter *adap, struct sge_qset *qs,
int budget)
{
struct sge_rspq *q = &qs->rspq;
struct rsp_desc *r = &q->desc[q->cidx];
int budget_left = budget;
unsigned int sleeping = 0;
struct sk_buff *offload_skbs[RX_BUNDLE_SIZE];
int ngathered = 0;
q->next_holdoff = q->holdoff_tmr;
while (likely(budget_left && is_new_response(r, q))) {
int eth, ethpad = 2;
struct sk_buff *skb = NULL;
u32 len, flags = ntohl(r->flags);
__be32 rss_hi = *(const __be32 *)r, rss_lo = r->rss_hdr.rss_hash_val;
eth = r->rss_hdr.opcode == CPL_RX_PKT;
if (unlikely(flags & F_RSPD_ASYNC_NOTIF)) {
skb = alloc_skb(AN_PKT_SIZE, GFP_ATOMIC);
if (!skb)
goto no_mem;
memcpy(__skb_put(skb, AN_PKT_SIZE), r, AN_PKT_SIZE);
skb->data[0] = CPL_ASYNC_NOTIF;
rss_hi = htonl(CPL_ASYNC_NOTIF << 24);
q->async_notif++;
} else if (flags & F_RSPD_IMM_DATA_VALID) {
skb = get_imm_packet(r);
if (unlikely(!skb)) {
no_mem:
q->next_holdoff = NOMEM_INTR_DELAY;
q->nomem++;
/* consume one credit since we tried */
budget_left--;
break;
}
q->imm_data++;
ethpad = 0;
} else if ((len = ntohl(r->len_cq)) != 0) {
struct sge_fl *fl;
fl = (len & F_RSPD_FLQ) ? &qs->fl[1] : &qs->fl[0];
if (fl->use_pages) {
void *addr = fl->sdesc[fl->cidx].pg_chunk.va;
prefetch(addr);
#if L1_CACHE_BYTES < 128
prefetch(addr + L1_CACHE_BYTES);
#endif
__refill_fl(adap, fl);
skb = get_packet_pg(adap, fl, G_RSPD_LEN(len),
eth ? SGE_RX_DROP_THRES : 0);
} else
skb = get_packet(adap, fl, G_RSPD_LEN(len),
eth ? SGE_RX_DROP_THRES : 0);
if (unlikely(!skb)) {
if (!eth)
goto no_mem;
q->rx_drops++;
} else if (unlikely(r->rss_hdr.opcode == CPL_TRACE_PKT))
__skb_pull(skb, 2);
if (++fl->cidx == fl->size)
fl->cidx = 0;
} else
q->pure_rsps++;
if (flags & RSPD_CTRL_MASK) {
sleeping |= flags & RSPD_GTS_MASK;
handle_rsp_cntrl_info(qs, flags);
}
r++;
if (unlikely(++q->cidx == q->size)) {
q->cidx = 0;
q->gen ^= 1;
r = q->desc;
}
prefetch(r);
if (++q->credits >= (q->size / 4)) {
refill_rspq(adap, q, q->credits);
q->credits = 0;
}
if (likely(skb != NULL)) {
if (eth)
rx_eth(adap, q, skb, ethpad);
else {
q->offload_pkts++;
/* Preserve the RSS info in csum & priority */
skb->csum = rss_hi;
skb->priority = rss_lo;
ngathered = rx_offload(&adap->tdev, q, skb,
offload_skbs,
ngathered);
}
}
--budget_left;
}
deliver_partial_bundle(&adap->tdev, q, offload_skbs, ngathered);
if (sleeping)
check_ring_db(adap, qs, sleeping);
smp_mb(); /* commit Tx queue .processed updates */
if (unlikely(qs->txq_stopped != 0))
restart_tx(qs);
budget -= budget_left;
return budget;
}
static inline int is_pure_response(const struct rsp_desc *r)
{
u32 n = ntohl(r->flags) & (F_RSPD_ASYNC_NOTIF | F_RSPD_IMM_DATA_VALID);
return (n | r->len_cq) == 0;
}
/**
* napi_rx_handler - the NAPI handler for Rx processing
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
* @napi: the napi instance
* @budget: how many packets we can process in this round
*
* Handler for new data events when using NAPI.
*/
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
static int napi_rx_handler(struct napi_struct *napi, int budget)
{
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
struct sge_qset *qs = container_of(napi, struct sge_qset, napi);
struct adapter *adap = qs->adap;
int work_done = process_responses(adap, qs, budget);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
if (likely(work_done < budget)) {
napi_complete(napi);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
/*
* Because we don't atomically flush the following
* write it is possible that in very rare cases it can
* reach the device in a way that races with a new
* response being written plus an error interrupt
* causing the NAPI interrupt handler below to return
* unhandled status to the OS. To protect against
* this would require flushing the write and doing
* both the write and the flush with interrupts off.
* Way too expensive and unjustifiable given the
* rarity of the race.
*
* The race cannot happen at all with MSI-X.
*/
t3_write_reg(adap, A_SG_GTS, V_RSPQ(qs->rspq.cntxt_id) |
V_NEWTIMER(qs->rspq.next_holdoff) |
V_NEWINDEX(qs->rspq.cidx));
}
return work_done;
}
/*
* Returns true if the device is already scheduled for polling.
*/
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
static inline int napi_is_scheduled(struct napi_struct *napi)
{
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
return test_bit(NAPI_STATE_SCHED, &napi->state);
}
/**
* process_pure_responses - process pure responses from a response queue
* @adap: the adapter
* @qs: the queue set owning the response queue
* @r: the first pure response to process
*
* A simpler version of process_responses() that handles only pure (i.e.,
* non data-carrying) responses. Such respones are too light-weight to
* justify calling a softirq under NAPI, so we handle them specially in
* the interrupt handler. The function is called with a pointer to a
* response, which the caller must ensure is a valid pure response.
*
* Returns 1 if it encounters a valid data-carrying response, 0 otherwise.
*/
static int process_pure_responses(struct adapter *adap, struct sge_qset *qs,
struct rsp_desc *r)
{
struct sge_rspq *q = &qs->rspq;
unsigned int sleeping = 0;
do {
u32 flags = ntohl(r->flags);
r++;
if (unlikely(++q->cidx == q->size)) {
q->cidx = 0;
q->gen ^= 1;
r = q->desc;
}
prefetch(r);
if (flags & RSPD_CTRL_MASK) {
sleeping |= flags & RSPD_GTS_MASK;
handle_rsp_cntrl_info(qs, flags);
}
q->pure_rsps++;
if (++q->credits >= (q->size / 4)) {
refill_rspq(adap, q, q->credits);
q->credits = 0;
}
} while (is_new_response(r, q) && is_pure_response(r));
if (sleeping)
check_ring_db(adap, qs, sleeping);
smp_mb(); /* commit Tx queue .processed updates */
if (unlikely(qs->txq_stopped != 0))
restart_tx(qs);
return is_new_response(r, q);
}
/**
* handle_responses - decide what to do with new responses in NAPI mode
* @adap: the adapter
* @q: the response queue
*
* This is used by the NAPI interrupt handlers to decide what to do with
* new SGE responses. If there are no new responses it returns -1. If
* there are new responses and they are pure (i.e., non-data carrying)
* it handles them straight in hard interrupt context as they are very
* cheap and don't deliver any packets. Finally, if there are any data
* signaling responses it schedules the NAPI handler. Returns 1 if it
* schedules NAPI, 0 if all new responses were pure.
*
* The caller must ascertain NAPI is not already running.
*/
static inline int handle_responses(struct adapter *adap, struct sge_rspq *q)
{
struct sge_qset *qs = rspq_to_qset(q);
struct rsp_desc *r = &q->desc[q->cidx];
if (!is_new_response(r, q))
return -1;
if (is_pure_response(r) && process_pure_responses(adap, qs, r) == 0) {
t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
V_NEWTIMER(q->holdoff_tmr) | V_NEWINDEX(q->cidx));
return 0;
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
napi_schedule(&qs->napi);
return 1;
}
/*
* The MSI-X interrupt handler for an SGE response queue for the non-NAPI case
* (i.e., response queue serviced in hard interrupt).
*/
irqreturn_t t3_sge_intr_msix(int irq, void *cookie)
{
struct sge_qset *qs = cookie;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
struct adapter *adap = qs->adap;
struct sge_rspq *q = &qs->rspq;
spin_lock(&q->lock);
if (process_responses(adap, qs, -1) == 0)
q->unhandled_irqs++;
t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
V_NEWTIMER(q->next_holdoff) | V_NEWINDEX(q->cidx));
spin_unlock(&q->lock);
return IRQ_HANDLED;
}
/*
* The MSI-X interrupt handler for an SGE response queue for the NAPI case
* (i.e., response queue serviced by NAPI polling).
*/
static irqreturn_t t3_sge_intr_msix_napi(int irq, void *cookie)
{
struct sge_qset *qs = cookie;
struct sge_rspq *q = &qs->rspq;
spin_lock(&q->lock);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
if (handle_responses(qs->adap, q) < 0)
q->unhandled_irqs++;
spin_unlock(&q->lock);
return IRQ_HANDLED;
}
/*
* The non-NAPI MSI interrupt handler. This needs to handle data events from
* SGE response queues as well as error and other async events as they all use
* the same MSI vector. We use one SGE response queue per port in this mode
* and protect all response queues with queue 0's lock.
*/
static irqreturn_t t3_intr_msi(int irq, void *cookie)
{
int new_packets = 0;
struct adapter *adap = cookie;
struct sge_rspq *q = &adap->sge.qs[0].rspq;
spin_lock(&q->lock);
if (process_responses(adap, &adap->sge.qs[0], -1)) {
t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
V_NEWTIMER(q->next_holdoff) | V_NEWINDEX(q->cidx));
new_packets = 1;
}
if (adap->params.nports == 2 &&
process_responses(adap, &adap->sge.qs[1], -1)) {
struct sge_rspq *q1 = &adap->sge.qs[1].rspq;
t3_write_reg(adap, A_SG_GTS, V_RSPQ(q1->cntxt_id) |
V_NEWTIMER(q1->next_holdoff) |
V_NEWINDEX(q1->cidx));
new_packets = 1;
}
if (!new_packets && t3_slow_intr_handler(adap) == 0)
q->unhandled_irqs++;
spin_unlock(&q->lock);
return IRQ_HANDLED;
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
static int rspq_check_napi(struct sge_qset *qs)
{
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
struct sge_rspq *q = &qs->rspq;
if (!napi_is_scheduled(&qs->napi) &&
is_new_response(&q->desc[q->cidx], q)) {
napi_schedule(&qs->napi);
return 1;
}
return 0;
}
/*
* The MSI interrupt handler for the NAPI case (i.e., response queues serviced
* by NAPI polling). Handles data events from SGE response queues as well as
* error and other async events as they all use the same MSI vector. We use
* one SGE response queue per port in this mode and protect all response
* queues with queue 0's lock.
*/
static irqreturn_t t3_intr_msi_napi(int irq, void *cookie)
{
int new_packets;
struct adapter *adap = cookie;
struct sge_rspq *q = &adap->sge.qs[0].rspq;
spin_lock(&q->lock);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
new_packets = rspq_check_napi(&adap->sge.qs[0]);
if (adap->params.nports == 2)
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
new_packets += rspq_check_napi(&adap->sge.qs[1]);
if (!new_packets && t3_slow_intr_handler(adap) == 0)
q->unhandled_irqs++;
spin_unlock(&q->lock);
return IRQ_HANDLED;
}
/*
* A helper function that processes responses and issues GTS.
*/
static inline int process_responses_gts(struct adapter *adap,
struct sge_rspq *rq)
{
int work;
work = process_responses(adap, rspq_to_qset(rq), -1);
t3_write_reg(adap, A_SG_GTS, V_RSPQ(rq->cntxt_id) |
V_NEWTIMER(rq->next_holdoff) | V_NEWINDEX(rq->cidx));
return work;
}
/*
* The legacy INTx interrupt handler. This needs to handle data events from
* SGE response queues as well as error and other async events as they all use
* the same interrupt pin. We use one SGE response queue per port in this mode
* and protect all response queues with queue 0's lock.
*/
static irqreturn_t t3_intr(int irq, void *cookie)
{
int work_done, w0, w1;
struct adapter *adap = cookie;
struct sge_rspq *q0 = &adap->sge.qs[0].rspq;
struct sge_rspq *q1 = &adap->sge.qs[1].rspq;
spin_lock(&q0->lock);
w0 = is_new_response(&q0->desc[q0->cidx], q0);
w1 = adap->params.nports == 2 &&
is_new_response(&q1->desc[q1->cidx], q1);
if (likely(w0 | w1)) {
t3_write_reg(adap, A_PL_CLI, 0);
t3_read_reg(adap, A_PL_CLI); /* flush */
if (likely(w0))
process_responses_gts(adap, q0);
if (w1)
process_responses_gts(adap, q1);
work_done = w0 | w1;
} else
work_done = t3_slow_intr_handler(adap);
spin_unlock(&q0->lock);
return IRQ_RETVAL(work_done != 0);
}
/*
* Interrupt handler for legacy INTx interrupts for T3B-based cards.
* Handles data events from SGE response queues as well as error and other
* async events as they all use the same interrupt pin. We use one SGE
* response queue per port in this mode and protect all response queues with
* queue 0's lock.
*/
static irqreturn_t t3b_intr(int irq, void *cookie)
{
u32 map;
struct adapter *adap = cookie;
struct sge_rspq *q0 = &adap->sge.qs[0].rspq;
t3_write_reg(adap, A_PL_CLI, 0);
map = t3_read_reg(adap, A_SG_DATA_INTR);
if (unlikely(!map)) /* shared interrupt, most likely */
return IRQ_NONE;
spin_lock(&q0->lock);
if (unlikely(map & F_ERRINTR))
t3_slow_intr_handler(adap);
if (likely(map & 1))
process_responses_gts(adap, q0);
if (map & 2)
process_responses_gts(adap, &adap->sge.qs[1].rspq);
spin_unlock(&q0->lock);
return IRQ_HANDLED;
}
/*
* NAPI interrupt handler for legacy INTx interrupts for T3B-based cards.
* Handles data events from SGE response queues as well as error and other
* async events as they all use the same interrupt pin. We use one SGE
* response queue per port in this mode and protect all response queues with
* queue 0's lock.
*/
static irqreturn_t t3b_intr_napi(int irq, void *cookie)
{
u32 map;
struct adapter *adap = cookie;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
struct sge_qset *qs0 = &adap->sge.qs[0];
struct sge_rspq *q0 = &qs0->rspq;
t3_write_reg(adap, A_PL_CLI, 0);
map = t3_read_reg(adap, A_SG_DATA_INTR);
if (unlikely(!map)) /* shared interrupt, most likely */
return IRQ_NONE;
spin_lock(&q0->lock);
if (unlikely(map & F_ERRINTR))
t3_slow_intr_handler(adap);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
if (likely(map & 1))
napi_schedule(&qs0->napi);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
if (map & 2)
napi_schedule(&adap->sge.qs[1].napi);
spin_unlock(&q0->lock);
return IRQ_HANDLED;
}
/**
* t3_intr_handler - select the top-level interrupt handler
* @adap: the adapter
* @polling: whether using NAPI to service response queues
*
* Selects the top-level interrupt handler based on the type of interrupts
* (MSI-X, MSI, or legacy) and whether NAPI will be used to service the
* response queues.
*/
irq_handler_t t3_intr_handler(struct adapter *adap, int polling)
{
if (adap->flags & USING_MSIX)
return polling ? t3_sge_intr_msix_napi : t3_sge_intr_msix;
if (adap->flags & USING_MSI)
return polling ? t3_intr_msi_napi : t3_intr_msi;
if (adap->params.rev > 0)
return polling ? t3b_intr_napi : t3b_intr;
return t3_intr;
}
#define SGE_PARERR (F_CPPARITYERROR | F_OCPARITYERROR | F_RCPARITYERROR | \
F_IRPARITYERROR | V_ITPARITYERROR(M_ITPARITYERROR) | \
V_FLPARITYERROR(M_FLPARITYERROR) | F_LODRBPARITYERROR | \
F_HIDRBPARITYERROR | F_LORCQPARITYERROR | \
F_HIRCQPARITYERROR)
#define SGE_FRAMINGERR (F_UC_REQ_FRAMINGERROR | F_R_REQ_FRAMINGERROR)
#define SGE_FATALERR (SGE_PARERR | SGE_FRAMINGERR | F_RSPQCREDITOVERFOW | \
F_RSPQDISABLED)
/**
* t3_sge_err_intr_handler - SGE async event interrupt handler
* @adapter: the adapter
*
* Interrupt handler for SGE asynchronous (non-data) events.
*/
void t3_sge_err_intr_handler(struct adapter *adapter)
{
unsigned int v, status = t3_read_reg(adapter, A_SG_INT_CAUSE);
if (status & SGE_PARERR)
CH_ALERT(adapter, "SGE parity error (0x%x)\n",
status & SGE_PARERR);
if (status & SGE_FRAMINGERR)
CH_ALERT(adapter, "SGE framing error (0x%x)\n",
status & SGE_FRAMINGERR);
if (status & F_RSPQCREDITOVERFOW)
CH_ALERT(adapter, "SGE response queue credit overflow\n");
if (status & F_RSPQDISABLED) {
v = t3_read_reg(adapter, A_SG_RSPQ_FL_STATUS);
CH_ALERT(adapter,
"packet delivered to disabled response queue "
"(0x%x)\n", (v >> S_RSPQ0DISABLED) & 0xff);
}
if (status & (F_HIPIODRBDROPERR | F_LOPIODRBDROPERR))
CH_ALERT(adapter, "SGE dropped %s priority doorbell\n",
status & F_HIPIODRBDROPERR ? "high" : "lo");
t3_write_reg(adapter, A_SG_INT_CAUSE, status);
if (status & SGE_FATALERR)
t3_fatal_err(adapter);
}
/**
* sge_timer_cb - perform periodic maintenance of an SGE qset
* @data: the SGE queue set to maintain
*
* Runs periodically from a timer to perform maintenance of an SGE queue
* set. It performs two tasks:
*
* a) Cleans up any completed Tx descriptors that may still be pending.
* Normal descriptor cleanup happens when new packets are added to a Tx
* queue so this timer is relatively infrequent and does any cleanup only
* if the Tx queue has not seen any new packets in a while. We make a
* best effort attempt to reclaim descriptors, in that we don't wait
* around if we cannot get a queue's lock (which most likely is because
* someone else is queueing new packets and so will also handle the clean
* up). Since control queues use immediate data exclusively we don't
* bother cleaning them up here.
*
* b) Replenishes Rx queues that have run out due to memory shortage.
* Normally new Rx buffers are added when existing ones are consumed but
* when out of memory a queue can become empty. We try to add only a few
* buffers here, the queue will be replenished fully as these new buffers
* are used up if memory shortage has subsided.
*/
static void sge_timer_cb(unsigned long data)
{
spinlock_t *lock;
struct sge_qset *qs = (struct sge_qset *)data;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
struct adapter *adap = qs->adap;
if (spin_trylock(&qs->txq[TXQ_ETH].lock)) {
reclaim_completed_tx(adap, &qs->txq[TXQ_ETH]);
spin_unlock(&qs->txq[TXQ_ETH].lock);
}
if (spin_trylock(&qs->txq[TXQ_OFLD].lock)) {
reclaim_completed_tx(adap, &qs->txq[TXQ_OFLD]);
spin_unlock(&qs->txq[TXQ_OFLD].lock);
}
lock = (adap->flags & USING_MSIX) ? &qs->rspq.lock :
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
&adap->sge.qs[0].rspq.lock;
if (spin_trylock_irq(lock)) {
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
if (!napi_is_scheduled(&qs->napi)) {
u32 status = t3_read_reg(adap, A_SG_RSPQ_FL_STATUS);
if (qs->fl[0].credits < qs->fl[0].size)
__refill_fl(adap, &qs->fl[0]);
if (qs->fl[1].credits < qs->fl[1].size)
__refill_fl(adap, &qs->fl[1]);
if (status & (1 << qs->rspq.cntxt_id)) {
qs->rspq.starved++;
if (qs->rspq.credits) {
refill_rspq(adap, &qs->rspq, 1);
qs->rspq.credits--;
qs->rspq.restarted++;
t3_write_reg(adap, A_SG_RSPQ_FL_STATUS,
1 << qs->rspq.cntxt_id);
}
}
}
spin_unlock_irq(lock);
}
mod_timer(&qs->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
}
/**
* t3_update_qset_coalesce - update coalescing settings for a queue set
* @qs: the SGE queue set
* @p: new queue set parameters
*
* Update the coalescing settings for an SGE queue set. Nothing is done
* if the queue set is not initialized yet.
*/
void t3_update_qset_coalesce(struct sge_qset *qs, const struct qset_params *p)
{
qs->rspq.holdoff_tmr = max(p->coalesce_usecs * 10, 1U);/* can't be 0 */
qs->rspq.polling = p->polling;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
qs->napi.poll = p->polling ? napi_rx_handler : ofld_poll;
}
/**
* t3_sge_alloc_qset - initialize an SGE queue set
* @adapter: the adapter
* @id: the queue set id
* @nports: how many Ethernet ports will be using this queue set
* @irq_vec_idx: the IRQ vector index for response queue interrupts
* @p: configuration parameters for this queue set
* @ntxq: number of Tx queues for the queue set
* @netdev: net device associated with this queue set
*
* Allocate resources and initialize an SGE queue set. A queue set
* comprises a response queue, two Rx free-buffer queues, and up to 3
* Tx queues. The Tx queues are assigned roles in the order Ethernet
* queue, offload queue, and control queue.
*/
int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
int irq_vec_idx, const struct qset_params *p,
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
int ntxq, struct net_device *dev)
{
int i, ret = -ENOMEM;
struct sge_qset *q = &adapter->sge.qs[id];
init_qset_cntxt(q, id);
init_timer(&q->tx_reclaim_timer);
q->tx_reclaim_timer.data = (unsigned long)q;
q->tx_reclaim_timer.function = sge_timer_cb;
q->fl[0].desc = alloc_ring(adapter->pdev, p->fl_size,
sizeof(struct rx_desc),
sizeof(struct rx_sw_desc),
&q->fl[0].phys_addr, &q->fl[0].sdesc);
if (!q->fl[0].desc)
goto err;
q->fl[1].desc = alloc_ring(adapter->pdev, p->jumbo_size,
sizeof(struct rx_desc),
sizeof(struct rx_sw_desc),
&q->fl[1].phys_addr, &q->fl[1].sdesc);
if (!q->fl[1].desc)
goto err;
q->rspq.desc = alloc_ring(adapter->pdev, p->rspq_size,
sizeof(struct rsp_desc), 0,
&q->rspq.phys_addr, NULL);
if (!q->rspq.desc)
goto err;
for (i = 0; i < ntxq; ++i) {
/*
* The control queue always uses immediate data so does not
* need to keep track of any sk_buffs.
*/
size_t sz = i == TXQ_CTRL ? 0 : sizeof(struct tx_sw_desc);
q->txq[i].desc = alloc_ring(adapter->pdev, p->txq_size[i],
sizeof(struct tx_desc), sz,
&q->txq[i].phys_addr,
&q->txq[i].sdesc);
if (!q->txq[i].desc)
goto err;
q->txq[i].gen = 1;
q->txq[i].size = p->txq_size[i];
spin_lock_init(&q->txq[i].lock);
skb_queue_head_init(&q->txq[i].sendq);
}
tasklet_init(&q->txq[TXQ_OFLD].qresume_tsk, restart_offloadq,
(unsigned long)q);
tasklet_init(&q->txq[TXQ_CTRL].qresume_tsk, restart_ctrlq,
(unsigned long)q);
q->fl[0].gen = q->fl[1].gen = 1;
q->fl[0].size = p->fl_size;
q->fl[1].size = p->jumbo_size;
q->rspq.gen = 1;
q->rspq.size = p->rspq_size;
spin_lock_init(&q->rspq.lock);
q->txq[TXQ_ETH].stop_thres = nports *
flits_to_desc(sgl_len(MAX_SKB_FRAGS + 1) + 3);
#if FL0_PG_CHUNK_SIZE > 0
q->fl[0].buf_size = FL0_PG_CHUNK_SIZE;
#else
q->fl[0].buf_size = SGE_RX_SM_BUF_SIZE + sizeof(struct cpl_rx_data);
#endif
q->fl[0].use_pages = FL0_PG_CHUNK_SIZE > 0;
q->fl[1].buf_size = is_offload(adapter) ?
(16 * 1024) - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) :
MAX_FRAME_SIZE + 2 + sizeof(struct cpl_rx_pkt);
spin_lock_irq(&adapter->sge.reg_lock);
/* FL threshold comparison uses < */
ret = t3_sge_init_rspcntxt(adapter, q->rspq.cntxt_id, irq_vec_idx,
q->rspq.phys_addr, q->rspq.size,
q->fl[0].buf_size, 1, 0);
if (ret)
goto err_unlock;
for (i = 0; i < SGE_RXQ_PER_SET; ++i) {
ret = t3_sge_init_flcntxt(adapter, q->fl[i].cntxt_id, 0,
q->fl[i].phys_addr, q->fl[i].size,
q->fl[i].buf_size, p->cong_thres, 1,
0);
if (ret)
goto err_unlock;
}
ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_ETH].cntxt_id, USE_GTS,
SGE_CNTXT_ETH, id, q->txq[TXQ_ETH].phys_addr,
q->txq[TXQ_ETH].size, q->txq[TXQ_ETH].token,
1, 0);
if (ret)
goto err_unlock;
if (ntxq > 1) {
ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_OFLD].cntxt_id,
USE_GTS, SGE_CNTXT_OFLD, id,
q->txq[TXQ_OFLD].phys_addr,
q->txq[TXQ_OFLD].size, 0, 1, 0);
if (ret)
goto err_unlock;
}
if (ntxq > 2) {
ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_CTRL].cntxt_id, 0,
SGE_CNTXT_CTRL, id,
q->txq[TXQ_CTRL].phys_addr,
q->txq[TXQ_CTRL].size,
q->txq[TXQ_CTRL].token, 1, 0);
if (ret)
goto err_unlock;
}
spin_unlock_irq(&adapter->sge.reg_lock);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
q->adap = adapter;
q->netdev = dev;
t3_update_qset_coalesce(q, p);
refill_fl(adapter, &q->fl[0], q->fl[0].size, GFP_KERNEL);
refill_fl(adapter, &q->fl[1], q->fl[1].size, GFP_KERNEL);
refill_rspq(adapter, &q->rspq, q->rspq.size - 1);
t3_write_reg(adapter, A_SG_GTS, V_RSPQ(q->rspq.cntxt_id) |
V_NEWTIMER(q->rspq.holdoff_tmr));
mod_timer(&q->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
return 0;
err_unlock:
spin_unlock_irq(&adapter->sge.reg_lock);
err:
t3_free_qset(adapter, q);
return ret;
}
/**
* t3_free_sge_resources - free SGE resources
* @adap: the adapter
*
* Frees resources used by the SGE queue sets.
*/
void t3_free_sge_resources(struct adapter *adap)
{
int i;
for (i = 0; i < SGE_QSETS; ++i)
t3_free_qset(adap, &adap->sge.qs[i]);
}
/**
* t3_sge_start - enable SGE
* @adap: the adapter
*
* Enables the SGE for DMAs. This is the last step in starting packet
* transfers.
*/
void t3_sge_start(struct adapter *adap)
{
t3_set_reg_field(adap, A_SG_CONTROL, F_GLOBALENABLE, F_GLOBALENABLE);
}
/**
* t3_sge_stop - disable SGE operation
* @adap: the adapter
*
* Disables the DMA engine. This can be called in emeregencies (e.g.,
* from error interrupts) or from normal process context. In the latter
* case it also disables any pending queue restart tasklets. Note that
* if it is called in interrupt context it cannot disable the restart
* tasklets as it cannot wait, however the tasklets will have no effect
* since the doorbells are disabled and the driver will call this again
* later from process context, at which time the tasklets will be stopped
* if they are still running.
*/
void t3_sge_stop(struct adapter *adap)
{
t3_set_reg_field(adap, A_SG_CONTROL, F_GLOBALENABLE, 0);
if (!in_interrupt()) {
int i;
for (i = 0; i < SGE_QSETS; ++i) {
struct sge_qset *qs = &adap->sge.qs[i];
tasklet_kill(&qs->txq[TXQ_OFLD].qresume_tsk);
tasklet_kill(&qs->txq[TXQ_CTRL].qresume_tsk);
}
}
}
/**
* t3_sge_init - initialize SGE
* @adap: the adapter
* @p: the SGE parameters
*
* Performs SGE initialization needed every time after a chip reset.
* We do not initialize any of the queue sets here, instead the driver
* top-level must request those individually. We also do not enable DMA
* here, that should be done after the queues have been set up.
*/
void t3_sge_init(struct adapter *adap, struct sge_params *p)
{
unsigned int ctrl, ups = ffs(pci_resource_len(adap->pdev, 2) >> 12);
ctrl = F_DROPPKT | V_PKTSHIFT(2) | F_FLMODE | F_AVOIDCQOVFL |
F_CQCRDTCTRL | F_CONGMODE | F_TNLFLMODE | F_FATLPERREN |
V_HOSTPAGESIZE(PAGE_SHIFT - 11) | F_BIGENDIANINGRESS |
V_USERSPACESIZE(ups ? ups - 1 : 0) | F_ISCSICOALESCING;
#if SGE_NUM_GENBITS == 1
ctrl |= F_EGRGENCTRL;
#endif
if (adap->params.rev > 0) {
if (!(adap->flags & (USING_MSIX | USING_MSI)))
ctrl |= F_ONEINTMULTQ | F_OPTONEINTMULTQ;
}
t3_write_reg(adap, A_SG_CONTROL, ctrl);
t3_write_reg(adap, A_SG_EGR_RCQ_DRB_THRSH, V_HIRCQDRBTHRSH(512) |
V_LORCQDRBTHRSH(512));
t3_write_reg(adap, A_SG_TIMER_TICK, core_ticks_per_usec(adap) / 10);
t3_write_reg(adap, A_SG_CMDQ_CREDIT_TH, V_THRESHOLD(32) |
V_TIMEOUT(200 * core_ticks_per_usec(adap)));
t3_write_reg(adap, A_SG_HI_DRB_HI_THRSH,
adap->params.rev < T3_REV_C ? 1000 : 500);
t3_write_reg(adap, A_SG_HI_DRB_LO_THRSH, 256);
t3_write_reg(adap, A_SG_LO_DRB_HI_THRSH, 1000);
t3_write_reg(adap, A_SG_LO_DRB_LO_THRSH, 256);
t3_write_reg(adap, A_SG_OCO_BASE, V_BASE1(0xfff));
t3_write_reg(adap, A_SG_DRB_PRI_THRESH, 63 * 1024);
}
/**
* t3_sge_prep - one-time SGE initialization
* @adap: the associated adapter
* @p: SGE parameters
*
* Performs one-time initialization of SGE SW state. Includes determining
* defaults for the assorted SGE parameters, which admins can change until
* they are used to initialize the SGE.
*/
void t3_sge_prep(struct adapter *adap, struct sge_params *p)
{
int i;
p->max_pkt_size = (16 * 1024) - sizeof(struct cpl_rx_data) -
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
for (i = 0; i < SGE_QSETS; ++i) {
struct qset_params *q = p->qset + i;
q->polling = adap->params.rev > 0;
q->coalesce_usecs = 5;
q->rspq_size = 1024;
q->fl_size = 1024;
q->jumbo_size = 512;
q->txq_size[TXQ_ETH] = 1024;
q->txq_size[TXQ_OFLD] = 1024;
q->txq_size[TXQ_CTRL] = 256;
q->cong_thres = 0;
}
spin_lock_init(&adap->sge.reg_lock);
}
/**
* t3_get_desc - dump an SGE descriptor for debugging purposes
* @qs: the queue set
* @qnum: identifies the specific queue (0..2: Tx, 3:response, 4..5: Rx)
* @idx: the descriptor index in the queue
* @data: where to dump the descriptor contents
*
* Dumps the contents of a HW descriptor of an SGE queue. Returns the
* size of the descriptor.
*/
int t3_get_desc(const struct sge_qset *qs, unsigned int qnum, unsigned int idx,
unsigned char *data)
{
if (qnum >= 6)
return -EINVAL;
if (qnum < 3) {
if (!qs->txq[qnum].desc || idx >= qs->txq[qnum].size)
return -EINVAL;
memcpy(data, &qs->txq[qnum].desc[idx], sizeof(struct tx_desc));
return sizeof(struct tx_desc);
}
if (qnum == 3) {
if (!qs->rspq.desc || idx >= qs->rspq.size)
return -EINVAL;
memcpy(data, &qs->rspq.desc[idx], sizeof(struct rsp_desc));
return sizeof(struct rsp_desc);
}
qnum -= 4;
if (!qs->fl[qnum].desc || idx >= qs->fl[qnum].size)
return -EINVAL;
memcpy(data, &qs->fl[qnum].desc[idx], sizeof(struct rx_desc));
return sizeof(struct rx_desc);
}