mirror of https://gitee.com/openkylin/linux.git
61 lines
1.6 KiB
Plaintext
61 lines
1.6 KiB
Plaintext
|
Freescale i.MX audio complex with ES8328 codec
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible : "fsl,imx-audio-es8328"
|
||
|
|
- model : The user-visible name of this sound complex
|
||
|
|
- ssi-controller : The phandle of the i.MX SSI controller
|
||
|
|
- jack-gpio : Optional GPIO for headphone jack
|
||
|
|
- audio-amp-supply : Power regulator for speaker amps
|
||
|
|
- audio-codec : The phandle of the ES8328 audio codec
|
||
|
|
- audio-routing : A list of the connections between audio components.
|
||
|
|
Each entry is a pair of strings, the first being the
|
||
|
|
connection's sink, the second being the connection's
|
||
|
|
source. Valid names could be power supplies, ES8328
|
||
|
|
pins, and the jacks on the board:
|
||
|
|
|
||
|
|
Power supplies:
|
||
|
|
* audio-amp
|
||
|
|
|
||
|
|
ES8328 pins:
|
||
|
|
* LOUT1
|
||
|
|
* LOUT2
|
||
|
|
* ROUT1
|
||
|
|
* ROUT2
|
||
|
|
* LINPUT1
|
||
|
|
* LINPUT2
|
||
|
|
* RINPUT1
|
||
|
|
* RINPUT2
|
||
|
|
* Mic PGA
|
||
|
|
|
||
|
|
Board connectors:
|
||
|
|
* Headphone
|
||
|
|
* Speaker
|
||
|
|
* Mic Jack
|
||
|
|
- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX)
|
||
|
|
- mux-ext-port : The external port of the i.MX audio muxer (AUDMIX)
|
||
|
|
|
||
|
|
Note: The AUDMUX port numbering should start at 1, which is consistent with
|
||
|
|
hardware manual.
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
sound {
|
||
|
|
compatible = "fsl,imx-audio-es8328";
|
||
|
|
model = "imx-audio-es8328";
|
||
|
|
ssi-controller = <&ssi1>;
|
||
|
|
audio-codec = <&codec>;
|
||
|
|
jack-gpio = <&gpio5 15 0>;
|
||
|
|
audio-amp-supply = <®_audio_amp>;
|
||
|
|
audio-routing =
|
||
|
|
"Speaker", "LOUT2",
|
||
|
|
"Speaker", "ROUT2",
|
||
|
|
"Speaker", "audio-amp",
|
||
|
|
"Headphone", "ROUT1",
|
||
|
|
"Headphone", "LOUT1",
|
||
|
|
"LINPUT1", "Mic Jack",
|
||
|
|
"RINPUT1", "Mic Jack",
|
||
|
|
"Mic Jack", "Mic Bias";
|
||
|
|
mux-int-port = <1>;
|
||
|
|
mux-ext-port = <3>;
|
||
|
|
};
|