linux/tools/perf/builtin-record.c

2246 lines
58 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* builtin-record.c
*
* Builtin record command: Record the profile of a workload
* (or a CPU, or a PID) into the perf.data output file - for
* later analysis via perf report.
*/
#include "builtin.h"
#include "perf.h"
#include "util/build-id.h"
#include "util/util.h"
#include <subcmd/parse-options.h>
#include "util/parse-events.h"
#include "util/config.h"
#include "util/callchain.h"
#include "util/cgroup.h"
#include "util/header.h"
#include "util/event.h"
#include "util/evlist.h"
#include "util/evsel.h"
#include "util/debug.h"
#include "util/session.h"
#include "util/tool.h"
perf symbols: Use the buildids if present With this change 'perf record' will intercept PERF_RECORD_MMAP calls, creating a linked list of DSOs, then when the session finishes, it will traverse this list and read the buildids, stashing them at the end of the file and will set up a new feature bit in the header bitmask. 'perf report' will then notice this feature and populate the 'dsos' list and set the build ids. When reading the symtabs it will refuse to load from a file that doesn't have the same build id. This improves the reliability of the profiler output, as symbols and profiling data is more guaranteed to match. Example: [root@doppio ~]# perf report | head /home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols # Samples: 2621434559 # # Overhead Command Shared Object Symbol # ........ ............... ............................. ...... # 7.91% init [kernel] [k] read_hpet 7.64% init [kernel] [k] mwait_idle_with_hints 7.60% swapper [kernel] [k] read_hpet 7.60% swapper [kernel] [k] mwait_idle_with_hints 3.65% init [kernel] [k] 0xffffffffa02339d9 [root@doppio ~]# In this case the 'perf' binary was an older one, vanished, so its symbols probably wouldn't match or would cause subtly different (and misleading) output. Next patches will support the kernel as well, reading the build id notes for it and the modules from /sys. Another patch should also introduce a new plumbing command: 'perf list-buildids' that will then be used in porcelain that is distro specific to fetch -debuginfo packages where such buildids are present. This will in turn allow for one to run 'perf record' in one machine and 'perf report' in another. Future work on having the buildid sent directly from the kernel in the PERF_RECORD_MMAP event is needed to close races, as the DSO can be changed during a 'perf record' session, but this patch at least helps with non-corner cases and current/older kernels. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-05 04:50:43 +08:00
#include "util/symbol.h"
perf tools: Fix sparse CPU numbering related bugs At present, the perf subcommands that do system-wide monitoring (perf stat, perf record and perf top) don't work properly unless the online cpus are numbered 0, 1, ..., N-1. These tools ask for the number of online cpus with sysconf(_SC_NPROCESSORS_ONLN) and then try to create events for cpus 0, 1, ..., N-1. This creates problems for systems where the online cpus are numbered sparsely. For example, a POWER6 system in single-threaded mode (i.e. only running 1 hardware thread per core) will have only even-numbered cpus online. This fixes the problem by reading the /sys/devices/system/cpu/online file to find out which cpus are online. The code that does that is in tools/perf/util/cpumap.[ch], and consists of a read_cpu_map() function that sets up a cpumap[] array and returns the number of online cpus. If /sys/devices/system/cpu/online can't be read or can't be parsed successfully, it falls back to using sysconf to ask how many cpus are online and sets up an identity map in cpumap[]. The perf record, perf stat and perf top code then calls read_cpu_map() in the system-wide monitoring case (instead of sysconf) and uses cpumap[] to get the cpu numbers to pass to perf_event_open. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> LKML-Reference: <20100310093609.GA3959@brick.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10 17:36:09 +08:00
#include "util/cpumap.h"
#include "util/thread_map.h"
#include "util/data.h"
perf record: Add ability to name registers to record This patch modifies the -I/--int-regs option to enablepassing the name of the registers to sample on interrupt. Registers can be specified by their symbolic names. For instance on x86, --intr-regs=ax,si. The motivation is to reduce the size of the perf.data file and the overhead of sampling by only collecting the registers useful to a specific analysis. For instance, for value profiling, sampling only the registers used to passed arguements to functions. With no parameter, the --intr-regs still records all possible registers based on the architecture. To name registers, it is necessary to use the long form of the option, i.e., --intr-regs: $ perf record --intr-regs=si,di,r8,r9 ..... To record any possible registers: $ perf record -I ..... $ perf report --intr-regs ... To display the register, one can use perf report -D To list the available registers: $ perf record --intr-regs=\? available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10 R11 R12 R13 R14 R15 Signed-off-by: Stephane Eranian <eranian@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1441039273-16260-4-git-send-email-eranian@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-01 00:41:12 +08:00
#include "util/perf_regs.h"
#include "util/auxtrace.h"
#include "util/tsc.h"
#include "util/parse-branch-options.h"
perf record: Add ability to name registers to record This patch modifies the -I/--int-regs option to enablepassing the name of the registers to sample on interrupt. Registers can be specified by their symbolic names. For instance on x86, --intr-regs=ax,si. The motivation is to reduce the size of the perf.data file and the overhead of sampling by only collecting the registers useful to a specific analysis. For instance, for value profiling, sampling only the registers used to passed arguements to functions. With no parameter, the --intr-regs still records all possible registers based on the architecture. To name registers, it is necessary to use the long form of the option, i.e., --intr-regs: $ perf record --intr-regs=si,di,r8,r9 ..... To record any possible registers: $ perf record -I ..... $ perf report --intr-regs ... To display the register, one can use perf report -D To list the available registers: $ perf record --intr-regs=\? available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10 R11 R12 R13 R14 R15 Signed-off-by: Stephane Eranian <eranian@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1441039273-16260-4-git-send-email-eranian@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-01 00:41:12 +08:00
#include "util/parse-regs-options.h"
#include "util/llvm-utils.h"
perf record: Apply config to BPF objects before recording bpf__apply_obj_config() is introduced as the core API to apply object config options to all BPF objects. This patch also does the real work for setting values for BPF_MAP_TYPE_PERF_ARRAY maps by inserting value stored in map's private field into the BPF map. This patch is required because we are not always able to set all BPF config during parsing. Further patch will set events created by perf to BPF_MAP_TYPE_PERF_EVENT_ARRAY maps, which is not exist until perf_evsel__open(). bpf_map_foreach_key() is introduced to iterate over each key needs to be configured. This function would be extended to support more map types and different key settings. In perf record, before start recording, call bpf__apply_config() to turn on all BPF config options. Test result: # cat ./test_bpf_map_1.c /************************ BEGIN **************************/ #include <uapi/linux/bpf.h> #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; static void *(*map_lookup_elem)(struct bpf_map_def *, void *) = (void *)BPF_FUNC_map_lookup_elem; static int (*trace_printk)(const char *fmt, int fmt_size, ...) = (void *)BPF_FUNC_trace_printk; struct bpf_map_def SEC("maps") channel = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_nanosleep") int func(void *ctx) { int key = 0; char fmt[] = "%d\n"; int *pval = map_lookup_elem(&channel, &key); if (!pval) return 0; trace_printk(fmt, sizeof(fmt), *pval); return 0; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; /************************* END ***************************/ # echo "" > /sys/kernel/debug/tracing/trace # ./perf record -e './test_bpf_map_1.c/map:channel.value=11/' usleep 10 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.012 MB perf.data ] # cat /sys/kernel/debug/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 1/1 #P:8 [SNIP] # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | usleep-18593 [007] d... 2394714.395539: : 11 # ./perf record -e './test_bpf_map_1.c/map:channel.value=101/' usleep 10 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.012 MB perf.data ] # cat /sys/kernel/debug/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 1/1 #P:8 [SNIP] # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | usleep-18593 [007] d... 2394714.395539: : 11 usleep-19000 [006] d... 2394831.057840: : 101 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 17:10:32 +08:00
#include "util/bpf-loader.h"
#include "util/trigger.h"
#include "util/perf-hooks.h"
#include "util/cpu-set-sched.h"
#include "util/time-utils.h"
#include "util/units.h"
perf tools: Synthesize PERF_RECORD_* for loaded BPF programs This patch synthesize PERF_RECORD_KSYMBOL and PERF_RECORD_BPF_EVENT for BPF programs loaded before perf-record. This is achieved by gathering information about all BPF programs via sys_bpf. Committer notes: Fix the build on some older systems such as amazonlinux:1 where it was breaking with: util/bpf-event.c: In function 'perf_event__synthesize_one_bpf_prog': util/bpf-event.c:52:9: error: missing initializer for field 'type' of 'struct bpf_prog_info' [-Werror=missing-field-initializers] struct bpf_prog_info info = {}; ^ In file included from /git/linux/tools/lib/bpf/bpf.h:26:0, from util/bpf-event.c:3: /git/linux/tools/include/uapi/linux/bpf.h:2699:8: note: 'type' declared here __u32 type; ^ cc1: all warnings being treated as errors Further fix on a centos:6 system: cc1: warnings being treated as errors util/bpf-event.c: In function 'perf_event__synthesize_one_bpf_prog': util/bpf-event.c:50: error: 'func_info_rec_size' may be used uninitialized in this function The compiler is wrong, but to silence it, initialize that variable to zero. One more fix, this time for debian:experimental-x-mips, x-mips64 and x-mipsel: util/bpf-event.c: In function 'perf_event__synthesize_one_bpf_prog': util/bpf-event.c:93:16: error: implicit declaration of function 'calloc' [-Werror=implicit-function-declaration] func_infos = calloc(sub_prog_cnt, func_info_rec_size); ^~~~~~ util/bpf-event.c:93:16: error: incompatible implicit declaration of built-in function 'calloc' [-Werror] util/bpf-event.c:93:16: note: include '<stdlib.h>' or provide a declaration of 'calloc' Add the missing header. Committer testing: # perf record --bpf-event sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.021 MB perf.data (7 samples) ] # perf report -D | grep PERF_RECORD_BPF_EVENT | nl 1 0 0x4b10 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 13 2 0 0x4c60 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 14 3 0 0x4db0 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 15 4 0 0x4f00 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 16 5 0 0x5050 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 17 6 0 0x51a0 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 18 7 0 0x52f0 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 21 8 0 0x5440 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 22 # bpftool prog 13: cgroup_skb tag 7be49e3934a125ba gpl loaded_at 2019-01-19T09:09:43-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 13,14 14: cgroup_skb tag 2a142ef67aaad174 gpl loaded_at 2019-01-19T09:09:43-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 13,14 15: cgroup_skb tag 7be49e3934a125ba gpl loaded_at 2019-01-19T09:09:43-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 15,16 16: cgroup_skb tag 2a142ef67aaad174 gpl loaded_at 2019-01-19T09:09:43-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 15,16 17: cgroup_skb tag 7be49e3934a125ba gpl loaded_at 2019-01-19T09:09:44-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 17,18 18: cgroup_skb tag 2a142ef67aaad174 gpl loaded_at 2019-01-19T09:09:44-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 17,18 21: cgroup_skb tag 7be49e3934a125ba gpl loaded_at 2019-01-19T09:09:45-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 21,22 22: cgroup_skb tag 2a142ef67aaad174 gpl loaded_at 2019-01-19T09:09:45-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 21,22 # # perf report -D | grep -B22 PERF_RECORD_KSYMBOL . ... raw event: size 312 bytes . 0000: 11 00 00 00 00 00 38 01 ff 44 06 c0 ff ff ff ff ......8..D...... . 0010: e5 00 00 00 01 00 00 00 62 70 66 5f 70 72 6f 67 ........bpf_prog . 0020: 5f 37 62 65 34 39 65 33 39 33 34 61 31 32 35 62 _7be49e3934a125b . 0030: 61 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a............... <SNIP zeroes> . 0110: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 ........!....... . 0120: 7b e4 9e 39 34 a1 25 ba 00 00 00 00 00 00 00 00 {..94.%......... . 0130: 00 00 00 00 00 00 00 00 ........ 0 0x49d8 [0x138]: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc00644ff len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba -- . ... raw event: size 312 bytes . 0000: 11 00 00 00 00 00 38 01 48 6d 06 c0 ff ff ff ff ......8.Hm...... . 0010: e5 00 00 00 01 00 00 00 62 70 66 5f 70 72 6f 67 ........bpf_prog . 0020: 5f 32 61 31 34 32 65 66 36 37 61 61 61 64 31 37 _2a142ef67aaad17 . 0030: 34 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4............... <SNIP zeroes> . 0110: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 ........!....... . 0120: 2a 14 2e f6 7a aa d1 74 00 00 00 00 00 00 00 00 *...z..t........ . 0130: 00 00 00 00 00 00 00 00 ........ 0 0x4b28 [0x138]: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0066d48 len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174 -- . ... raw event: size 312 bytes . 0000: 11 00 00 00 00 00 38 01 04 cf 03 c0 ff ff ff ff ......8......... . 0010: e5 00 00 00 01 00 00 00 62 70 66 5f 70 72 6f 67 ........bpf_prog . 0020: 5f 37 62 65 34 39 65 33 39 33 34 61 31 32 35 62 _7be49e3934a125b . 0030: 61 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a............... <SNIP zeroes> . 0110: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 ........!....... . 0120: 7b e4 9e 39 34 a1 25 ba 00 00 00 00 00 00 00 00 {..94.%......... . 0130: 00 00 00 00 00 00 00 00 ........ 0 0x4c78 [0x138]: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc003cf04 len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba -- . ... raw event: size 312 bytes . 0000: 11 00 00 00 00 00 38 01 96 28 04 c0 ff ff ff ff ......8..(...... . 0010: e5 00 00 00 01 00 00 00 62 70 66 5f 70 72 6f 67 ........bpf_prog . 0020: 5f 32 61 31 34 32 65 66 36 37 61 61 61 64 31 37 _2a142ef67aaad17 . 0030: 34 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4............... <SNIP zeroes> . 0110: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 ........!....... . 0120: 2a 14 2e f6 7a aa d1 74 00 00 00 00 00 00 00 00 *...z..t........ . 0130: 00 00 00 00 00 00 00 00 ........ 0 0x4dc8 [0x138]: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0042896 len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174 -- . ... raw event: size 312 bytes . 0000: 11 00 00 00 00 00 38 01 05 13 17 c0 ff ff ff ff ......8......... . 0010: e5 00 00 00 01 00 00 00 62 70 66 5f 70 72 6f 67 ........bpf_prog . 0020: 5f 37 62 65 34 39 65 33 39 33 34 61 31 32 35 62 _7be49e3934a125b . 0030: 61 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a............... <SNIP zeroes> . 0110: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 ........!....... . 0120: 7b e4 9e 39 34 a1 25 ba 00 00 00 00 00 00 00 00 {..94.%......... . 0130: 00 00 00 00 00 00 00 00 ........ 0 0x4f18 [0x138]: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0171305 len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba -- . ... raw event: size 312 bytes . 0000: 11 00 00 00 00 00 38 01 0a 8c 23 c0 ff ff ff ff ......8...#..... . 0010: e5 00 00 00 01 00 00 00 62 70 66 5f 70 72 6f 67 ........bpf_prog . 0020: 5f 32 61 31 34 32 65 66 36 37 61 61 61 64 31 37 _2a142ef67aaad17 . 0030: 34 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4............... <SNIP zeroes> . 0110: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 ........!....... . 0120: 2a 14 2e f6 7a aa d1 74 00 00 00 00 00 00 00 00 *...z..t........ . 0130: 00 00 00 00 00 00 00 00 ........ 0 0x5068 [0x138]: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0238c0a len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174 -- . ... raw event: size 312 bytes . 0000: 11 00 00 00 00 00 38 01 2a a5 a4 c0 ff ff ff ff ......8.*....... . 0010: e5 00 00 00 01 00 00 00 62 70 66 5f 70 72 6f 67 ........bpf_prog . 0020: 5f 37 62 65 34 39 65 33 39 33 34 61 31 32 35 62 _7be49e3934a125b . 0030: 61 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a............... <SNIP zeroes> . 0110: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 ........!....... . 0120: 7b e4 9e 39 34 a1 25 ba 00 00 00 00 00 00 00 00 {..94.%......... . 0130: 00 00 00 00 00 00 00 00 ........ 0 0x51b8 [0x138]: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0a4a52a len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba -- . ... raw event: size 312 bytes . 0000: 11 00 00 00 00 00 38 01 9b c9 a4 c0 ff ff ff ff ......8......... . 0010: e5 00 00 00 01 00 00 00 62 70 66 5f 70 72 6f 67 ........bpf_prog . 0020: 5f 32 61 31 34 32 65 66 36 37 61 61 61 64 31 37 _2a142ef67aaad17 . 0030: 34 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4............... <SNIP zeroes> . 0110: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 ........!....... . 0120: 2a 14 2e f6 7a aa d1 74 00 00 00 00 00 00 00 00 *...z..t........ . 0130: 00 00 00 00 00 00 00 00 ........ 0 0x5308 [0x138]: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0a4c99b len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174 Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-team@fb.com Cc: netdev@vger.kernel.org Link: http://lkml.kernel.org/r/20190117161521.1341602-8-songliubraving@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-18 00:15:19 +08:00
#include "util/bpf-event.h"
#include "asm/bug.h"
#include <errno.h>
#include <inttypes.h>
perf record: Allow asking for the maximum allowed sample rate Add the handy '-F max' shortcut to reading and using the kernel.perf_event_max_sample_rate value as the user supplied sampling frequency: # perf record -F max sleep 1 info: Using a maximum frequency rate of 15,000 Hz [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.019 MB perf.data (14 samples) ] # sysctl kernel.perf_event_max_sample_rate kernel.perf_event_max_sample_rate = 15000 # perf evlist -v cycles:ppp: size: 112, { sample_period, sample_freq }: 15000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # perf record -F 10 sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.019 MB perf.data (4 samples) ] # perf evlist -v cycles:ppp: size: 112, { sample_period, sample_freq }: 10, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # Suggested-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-4y0tiuws62c64gp4cf0hme0m@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-02 00:46:23 +08:00
#include <locale.h>
#include <poll.h>
#include <unistd.h>
#include <sched.h>
#include <signal.h>
#include <sys/mman.h>
#include <sys/wait.h>
#include <linux/time64.h>
struct switch_output {
bool enabled;
bool signal;
unsigned long size;
unsigned long time;
const char *str;
bool set;
char **filenames;
int num_files;
int cur_file;
};
struct record {
struct perf_tool tool;
struct record_opts opts;
u64 bytes_written;
struct perf_data data;
struct auxtrace_record *itr;
struct perf_evlist *evlist;
struct perf_session *session;
int realtime_prio;
bool no_buildid;
bool no_buildid_set;
bool no_buildid_cache;
bool no_buildid_cache_set;
bool buildid_all;
bool timestamp_filename;
perf record: Record the first and last sample time in the header In the default 'perf record' configuration, all samples are processed, to create the HEADER_BUILD_ID table. So it's very easy to get the first/last samples and save the time to perf file header via the function write_sample_time(). Later, at post processing time, perf report/script will fetch the time from perf file header. Committer testing: # perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.099 MB perf.data (1101 samples) ] [root@jouet home]# perf report --header | grep "time of " # time of first sample : 22947.909226 # time of last sample : 22948.910704 # # perf report -D | grep PERF_RECORD_SAMPLE\( 0 22947909226101 0x20bb68 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa21b1af3 period: 1 addr: 0 0 22947909229928 0x20bb98 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa200d204 period: 1 addr: 0 <SNIP> 3 22948910397351 0x219360 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 28251/28251: 0xffffffffa22071d8 period: 169518 addr: 0 0 22948910652380 0x20f120 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 198807 addr: 0 2 22948910704034 0x2172d0 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 88111 addr: 0 # Changelog: v7: Just update the patch description according to Arnaldo's suggestion. v6: Currently '--buildid-all' is not enabled at default. So the walking on all samples is the default operation. There is no big overhead to calculate the timestamp boundary in process_sample_event handler once we already go through all samples. So the timestamp boundary calculation is enabled by default when '--buildid-all' is not enabled. While if '--buildid-all' is enabled, we creates a new option "--timestamp-boundary" for user to decide if it enables the timestamp boundary calculation. v5: There is an issue that the sample walking can only work when '--buildid-all' is not enabled. So we need to let the walking be able to work even if '--buildid-all' is enabled and let the processing skips the dso hit marking for this case. At first, I want to provide a new option "--record-time-boundaries". While after consideration, I think a new option is not very necessary. v3: Remove the definitions of first_sample_time and last_sample_time from struct record and directly save them in perf_evlist. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-3-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-12-08 21:13:42 +08:00
bool timestamp_boundary;
struct switch_output switch_output;
unsigned long long samples;
cpu_set_t affinity_mask;
};
static volatile int auxtrace_record__snapshot_started;
static DEFINE_TRIGGER(auxtrace_snapshot_trigger);
static DEFINE_TRIGGER(switch_output_trigger);
static const char *affinity_tags[PERF_AFFINITY_MAX] = {
"SYS", "NODE", "CPU"
};
static bool switch_output_signal(struct record *rec)
{
return rec->switch_output.signal &&
trigger_is_ready(&switch_output_trigger);
}
static bool switch_output_size(struct record *rec)
{
return rec->switch_output.size &&
trigger_is_ready(&switch_output_trigger) &&
(rec->bytes_written >= rec->switch_output.size);
}
static bool switch_output_time(struct record *rec)
{
return rec->switch_output.time &&
trigger_is_ready(&switch_output_trigger);
}
static int record__write(struct record *rec, struct perf_mmap *map __maybe_unused,
void *bf, size_t size)
{
struct perf_data_file *file = &rec->session->data->file;
if (perf_data_file__write(file, bf, size) < 0) {
pr_err("failed to write perf data, error: %m\n");
return -1;
}
rec->bytes_written += size;
if (switch_output_size(rec))
trigger_hit(&switch_output_trigger);
return 0;
}
#ifdef HAVE_AIO_SUPPORT
static int record__aio_write(struct aiocb *cblock, int trace_fd,
void *buf, size_t size, off_t off)
{
int rc;
cblock->aio_fildes = trace_fd;
cblock->aio_buf = buf;
cblock->aio_nbytes = size;
cblock->aio_offset = off;
cblock->aio_sigevent.sigev_notify = SIGEV_NONE;
do {
rc = aio_write(cblock);
if (rc == 0) {
break;
} else if (errno != EAGAIN) {
cblock->aio_fildes = -1;
pr_err("failed to queue perf data, error: %m\n");
break;
}
} while (1);
return rc;
}
static int record__aio_complete(struct perf_mmap *md, struct aiocb *cblock)
{
void *rem_buf;
off_t rem_off;
size_t rem_size;
int rc, aio_errno;
ssize_t aio_ret, written;
aio_errno = aio_error(cblock);
if (aio_errno == EINPROGRESS)
return 0;
written = aio_ret = aio_return(cblock);
if (aio_ret < 0) {
if (aio_errno != EINTR)
pr_err("failed to write perf data, error: %m\n");
written = 0;
}
rem_size = cblock->aio_nbytes - written;
if (rem_size == 0) {
cblock->aio_fildes = -1;
/*
* md->refcount is incremented in perf_mmap__push() for
* every enqueued aio write request so decrement it because
* the request is now complete.
*/
perf_mmap__put(md);
rc = 1;
} else {
/*
* aio write request may require restart with the
* reminder if the kernel didn't write whole
* chunk at once.
*/
rem_off = cblock->aio_offset + written;
rem_buf = (void *)(cblock->aio_buf + written);
record__aio_write(cblock, cblock->aio_fildes,
rem_buf, rem_size, rem_off);
rc = 0;
}
return rc;
}
static int record__aio_sync(struct perf_mmap *md, bool sync_all)
{
struct aiocb **aiocb = md->aio.aiocb;
struct aiocb *cblocks = md->aio.cblocks;
struct timespec timeout = { 0, 1000 * 1000 * 1 }; /* 1ms */
int i, do_suspend;
do {
do_suspend = 0;
for (i = 0; i < md->aio.nr_cblocks; ++i) {
if (cblocks[i].aio_fildes == -1 || record__aio_complete(md, &cblocks[i])) {
if (sync_all)
aiocb[i] = NULL;
else
return i;
} else {
/*
* Started aio write is not complete yet
* so it has to be waited before the
* next allocation.
*/
aiocb[i] = &cblocks[i];
do_suspend = 1;
}
}
if (!do_suspend)
return -1;
while (aio_suspend((const struct aiocb **)aiocb, md->aio.nr_cblocks, &timeout)) {
if (!(errno == EAGAIN || errno == EINTR))
pr_err("failed to sync perf data, error: %m\n");
}
} while (1);
}
static int record__aio_pushfn(void *to, struct aiocb *cblock, void *bf, size_t size, off_t off)
{
struct record *rec = to;
int ret, trace_fd = rec->session->data->file.fd;
rec->samples++;
ret = record__aio_write(cblock, trace_fd, bf, size, off);
if (!ret) {
rec->bytes_written += size;
if (switch_output_size(rec))
trigger_hit(&switch_output_trigger);
}
return ret;
}
static off_t record__aio_get_pos(int trace_fd)
{
return lseek(trace_fd, 0, SEEK_CUR);
}
static void record__aio_set_pos(int trace_fd, off_t pos)
{
lseek(trace_fd, pos, SEEK_SET);
}
static void record__aio_mmap_read_sync(struct record *rec)
{
int i;
struct perf_evlist *evlist = rec->evlist;
struct perf_mmap *maps = evlist->mmap;
if (!rec->opts.nr_cblocks)
return;
for (i = 0; i < evlist->nr_mmaps; i++) {
struct perf_mmap *map = &maps[i];
if (map->base)
record__aio_sync(map, true);
}
}
static int nr_cblocks_default = 1;
static int nr_cblocks_max = 4;
static int record__aio_parse(const struct option *opt,
const char *str,
int unset)
{
struct record_opts *opts = (struct record_opts *)opt->value;
if (unset) {
opts->nr_cblocks = 0;
} else {
if (str)
opts->nr_cblocks = strtol(str, NULL, 0);
if (!opts->nr_cblocks)
opts->nr_cblocks = nr_cblocks_default;
}
return 0;
}
#else /* HAVE_AIO_SUPPORT */
static int nr_cblocks_max = 0;
static int record__aio_sync(struct perf_mmap *md __maybe_unused, bool sync_all __maybe_unused)
{
return -1;
}
static int record__aio_pushfn(void *to __maybe_unused, struct aiocb *cblock __maybe_unused,
void *bf __maybe_unused, size_t size __maybe_unused, off_t off __maybe_unused)
{
return -1;
}
static off_t record__aio_get_pos(int trace_fd __maybe_unused)
{
return -1;
}
static void record__aio_set_pos(int trace_fd __maybe_unused, off_t pos __maybe_unused)
{
}
static void record__aio_mmap_read_sync(struct record *rec __maybe_unused)
{
}
#endif
static int record__aio_enabled(struct record *rec)
{
return rec->opts.nr_cblocks > 0;
}
static int process_synthesized_event(struct perf_tool *tool,
union perf_event *event,
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
struct perf_sample *sample __maybe_unused,
struct machine *machine __maybe_unused)
{
struct record *rec = container_of(tool, struct record, tool);
return record__write(rec, NULL, event, event->header.size);
}
static int record__pushfn(struct perf_mmap *map, void *to, void *bf, size_t size)
{
struct record *rec = to;
rec->samples++;
return record__write(rec, map, bf, size);
}
static volatile int done;
static volatile int signr = -1;
static volatile int child_finished;
static void sig_handler(int sig)
{
if (sig == SIGCHLD)
child_finished = 1;
else
signr = sig;
done = 1;
}
static void sigsegv_handler(int sig)
{
perf_hooks__recover();
sighandler_dump_stack(sig);
}
static void record__sig_exit(void)
{
if (signr == -1)
return;
signal(signr, SIG_DFL);
raise(signr);
}
#ifdef HAVE_AUXTRACE_SUPPORT
static int record__process_auxtrace(struct perf_tool *tool,
struct perf_mmap *map,
union perf_event *event, void *data1,
size_t len1, void *data2, size_t len2)
{
struct record *rec = container_of(tool, struct record, tool);
struct perf_data *data = &rec->data;
size_t padding;
u8 pad[8] = {0};
if (!perf_data__is_pipe(data) && !perf_data__is_dir(data)) {
off_t file_offset;
int fd = perf_data__fd(data);
int err;
file_offset = lseek(fd, 0, SEEK_CUR);
if (file_offset == -1)
return -1;
err = auxtrace_index__auxtrace_event(&rec->session->auxtrace_index,
event, file_offset);
if (err)
return err;
}
/* event.auxtrace.size includes padding, see __auxtrace_mmap__read() */
padding = (len1 + len2) & 7;
if (padding)
padding = 8 - padding;
record__write(rec, map, event, event->header.size);
record__write(rec, map, data1, len1);
if (len2)
record__write(rec, map, data2, len2);
record__write(rec, map, &pad, padding);
return 0;
}
static int record__auxtrace_mmap_read(struct record *rec,
struct perf_mmap *map)
{
int ret;
ret = auxtrace_mmap__read(map, rec->itr, &rec->tool,
record__process_auxtrace);
if (ret < 0)
return ret;
if (ret)
rec->samples++;
return 0;
}
static int record__auxtrace_mmap_read_snapshot(struct record *rec,
struct perf_mmap *map)
{
int ret;
ret = auxtrace_mmap__read_snapshot(map, rec->itr, &rec->tool,
record__process_auxtrace,
rec->opts.auxtrace_snapshot_size);
if (ret < 0)
return ret;
if (ret)
rec->samples++;
return 0;
}
static int record__auxtrace_read_snapshot_all(struct record *rec)
{
int i;
int rc = 0;
for (i = 0; i < rec->evlist->nr_mmaps; i++) {
struct perf_mmap *map = &rec->evlist->mmap[i];
if (!map->auxtrace_mmap.base)
continue;
if (record__auxtrace_mmap_read_snapshot(rec, map) != 0) {
rc = -1;
goto out;
}
}
out:
return rc;
}
static void record__read_auxtrace_snapshot(struct record *rec)
{
pr_debug("Recording AUX area tracing snapshot\n");
if (record__auxtrace_read_snapshot_all(rec) < 0) {
trigger_error(&auxtrace_snapshot_trigger);
} else {
if (auxtrace_record__snapshot_finish(rec->itr))
trigger_error(&auxtrace_snapshot_trigger);
else
trigger_ready(&auxtrace_snapshot_trigger);
}
}
static int record__auxtrace_init(struct record *rec)
{
int err;
if (!rec->itr) {
rec->itr = auxtrace_record__init(rec->evlist, &err);
if (err)
return err;
}
err = auxtrace_parse_snapshot_options(rec->itr, &rec->opts,
rec->opts.auxtrace_snapshot_opts);
if (err)
return err;
return auxtrace_parse_filters(rec->evlist);
}
#else
static inline
int record__auxtrace_mmap_read(struct record *rec __maybe_unused,
struct perf_mmap *map __maybe_unused)
{
return 0;
}
static inline
void record__read_auxtrace_snapshot(struct record *rec __maybe_unused)
{
}
static inline
int auxtrace_record__snapshot_start(struct auxtrace_record *itr __maybe_unused)
{
return 0;
}
static int record__auxtrace_init(struct record *rec __maybe_unused)
{
return 0;
}
#endif
static int record__mmap_evlist(struct record *rec,
struct perf_evlist *evlist)
{
struct record_opts *opts = &rec->opts;
char msg[512];
if (opts->affinity != PERF_AFFINITY_SYS)
cpu__setup_cpunode_map();
if (perf_evlist__mmap_ex(evlist, opts->mmap_pages,
opts->auxtrace_mmap_pages,
opts->auxtrace_snapshot_mode,
opts->nr_cblocks, opts->affinity) < 0) {
if (errno == EPERM) {
pr_err("Permission error mapping pages.\n"
"Consider increasing "
"/proc/sys/kernel/perf_event_mlock_kb,\n"
"or try again with a smaller value of -m/--mmap_pages.\n"
"(current value: %u,%u)\n",
opts->mmap_pages, opts->auxtrace_mmap_pages);
return -errno;
} else {
pr_err("failed to mmap with %d (%s)\n", errno,
str_error_r(errno, msg, sizeof(msg)));
if (errno)
return -errno;
else
return -EINVAL;
}
}
return 0;
}
static int record__mmap(struct record *rec)
{
return record__mmap_evlist(rec, rec->evlist);
}
static int record__open(struct record *rec)
{
char msg[BUFSIZ];
perf tools: Enable grouping logic for parsed events This patch adds a functionality that allows to create event groups based on the way they are specified on the command line. Adding functionality to the '{}' group syntax introduced in earlier patch. The current '--group/-g' option behaviour remains intact. If you specify it for record/stat/top command, all the specified events become members of a single group with the first event as a group leader. With the new '{}' group syntax you can create group like: # perf record -e '{cycles,faults}' ls resulting in single event group containing 'cycles' and 'faults' events, with cycles event as group leader. All groups are created with regards to threads and cpus. Thus recording an event group within a 2 threads on server with 4 CPUs will create 8 separate groups. Examples (first event in brackets is group leader): # 1 group (cpu-clock,task-clock) perf record --group -e cpu-clock,task-clock ls perf record -e '{cpu-clock,task-clock}' ls # 2 groups (cpu-clock,task-clock) (minor-faults,major-faults) perf record -e '{cpu-clock,task-clock},{minor-faults,major-faults}' ls # 1 group (cpu-clock,task-clock,minor-faults,major-faults) perf record --group -e cpu-clock,task-clock -e minor-faults,major-faults ls perf record -e '{cpu-clock,task-clock,minor-faults,major-faults}' ls # 2 groups (cpu-clock,task-clock) (minor-faults,major-faults) perf record -e '{cpu-clock,task-clock} -e '{minor-faults,major-faults}' \ -e instructions ls # 1 group # (cpu-clock,task-clock,minor-faults,major-faults,instructions) perf record --group -e cpu-clock,task-clock \ -e minor-faults,major-faults -e instructions ls perf record -e '{cpu-clock,task-clock,minor-faults,major-faults,instructions}' ls It's possible to use standard event modifier for a group, which spans over all events in the group and updates each event modifier settings, for example: # perf record -r '{faults:k,cache-references}:p' resulting in ':kp' modifier being used for 'faults' and ':p' modifier being used for 'cache-references' event. Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/n/tip-ho42u0wcr8mn1otkalqi13qp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-08 18:22:36 +08:00
struct perf_evsel *pos;
struct perf_evlist *evlist = rec->evlist;
struct perf_session *session = rec->session;
struct record_opts *opts = &rec->opts;
int rc = 0;
perf record: Generate PERF_RECORD_{MMAP,COMM,EXEC} with --delay When we use an initial delay, e.g.: 'perf record --delay 1000', we do not enable the events until that delay has passed after we started the workload, including the tracking event, i.e. the one for which we have attr.mmap, etc, enabled to ask the kernel to generate the PERF_RECORD_{MMAP,COMM,EXEC} metadata events that will then allow us to resolve addresses in samples to the map, dso and symbol. There will be a shadow that even synthesizing samples won't cover, i.e. the workload that we start and other processes forking while we wait for the initial delay to expire. So use a dummy event to be the tracking one and make it be enabled on exec. Before: # perf record --delay 1000 stress --cpu 1 --timeout 5 stress: info: [9029] dispatching hogs: 1 cpu, 0 io, 0 vm, 0 hdd stress: info: [9029] successful run completed in 5s [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 0.624 MB perf.data (15908 samples) ] # perf script | head :9031 9031 32001.826888: 1 cycles:ppp: ffffffff831aa30d event_function (/lib/modules/4.14.0-rc6+/build/vmlinux) :9031 9031 32001.826893: 1 cycles:ppp: ffffffff8300d1a0 intel_bts_enable_local (/lib/modules/4.14.0-rc6+/build/vmlinux) :9031 9031 32001.826895: 7 cycles:ppp: ffffffff83023870 sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux) :9031 9031 32001.826897: 103 cycles:ppp: ffffffff8300c331 intel_pmu_handle_irq (/lib/modules/4.14.0-rc6+/build/vmlinux) :9031 9031 32001.826899: 1615 cycles:ppp: ffffffff830231f8 native_sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux) :9031 9031 32001.826902: 26724 cycles:ppp: ffffffff8384c6a7 native_irq_return_iret (/lib/modules/4.14.0-rc6+/build/vmlinux) :9031 9031 32001.826913: 329739 cycles:ppp: 7fb2a5410932 [unknown] ([unknown]) :9031 9031 32001.827033: 1225451 cycles:ppp: 7fb2a5410930 [unknown] ([unknown]) :9031 9031 32001.827474: 1391725 cycles:ppp: 7fb2a5410930 [unknown] ([unknown]) :9031 9031 32001.827978: 1233697 cycles:ppp: 7fb2a5410928 [unknown] ([unknown]) # After: # perf record --delay 1000 stress --cpu 1 --timeout 5 stress: info: [9741] dispatching hogs: 1 cpu, 0 io, 0 vm, 0 hdd stress: info: [9741] successful run completed in 5s [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 0.751 MB perf.data (15976 samples) ] # perf script | head stress 9742 32110.959106: 1 cycles:ppp: ffffffff831b26f6 __perf_event_task_sched_in (/lib/modules/4.14.0-rc6+/build/vmlinux) stress 9742 32110.959110: 1 cycles:ppp: ffffffff8300c2e9 intel_pmu_handle_irq (/lib/modules/4.14.0-rc6+/build/vmlinux) stress 9742 32110.959112: 7 cycles:ppp: ffffffff830231e0 native_sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux) stress 9742 32110.959115: 101 cycles:ppp: ffffffff83023870 sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux) stress 9742 32110.959117: 1533 cycles:ppp: ffffffff830231f8 native_sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux) stress 9742 32110.959119: 23992 cycles:ppp: ffffffff831b0900 ctx_sched_in (/lib/modules/4.14.0-rc6+/build/vmlinux) stress 9742 32110.959129: 329406 cycles:ppp: 7f4b1b661930 __random_r (/usr/lib64/libc-2.25.so) stress 9742 32110.959249: 1288322 cycles:ppp: 5566e1e7cbc9 hogcpu (/usr/bin/stress) stress 9742 32110.959712: 1464046 cycles:ppp: 7f4b1b66179e __random (/usr/lib64/libc-2.25.so) stress 9742 32110.960241: 1266918 cycles:ppp: 7f4b1b66195b __random_r (/usr/lib64/libc-2.25.so) # Reported-by: Bram Stolk <b.stolk@gmail.com> Tested-by: Bram Stolk <b.stolk@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 6619a53ef757 ("perf record: Add --initial-delay option") Link: http://lkml.kernel.org/n/tip-nrdfchshqxf7diszhxcecqb9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-04 02:34:34 +08:00
/*
* For initial_delay we need to add a dummy event so that we can track
* PERF_RECORD_MMAP while we wait for the initial delay to enable the
* real events, the ones asked by the user.
*/
if (opts->initial_delay) {
if (perf_evlist__add_dummy(evlist))
return -ENOMEM;
pos = perf_evlist__first(evlist);
pos->tracking = 0;
pos = perf_evlist__last(evlist);
pos->tracking = 1;
pos->attr.enable_on_exec = 1;
}
perf_evlist__config(evlist, opts, &callchain_param);
evlist__for_each_entry(evlist, pos) {
try_again:
if (perf_evsel__open(pos, pos->cpus, pos->threads) < 0) {
if (perf_evsel__fallback(pos, errno, msg, sizeof(msg))) {
if (verbose > 0)
ui__warning("%s\n", msg);
goto try_again;
}
if ((errno == EINVAL || errno == EBADF) &&
pos->leader != pos &&
pos->weak_group) {
pos = perf_evlist__reset_weak_group(evlist, pos);
goto try_again;
}
rc = -errno;
perf_evsel__open_strerror(pos, &opts->target,
errno, msg, sizeof(msg));
ui__error("%s\n", msg);
goto out;
}
pos->supported = true;
}
if (perf_evlist__apply_filters(evlist, &pos)) {
pr_err("failed to set filter \"%s\" on event %s with %d (%s)\n",
pos->filter, perf_evsel__name(pos), errno,
str_error_r(errno, msg, sizeof(msg)));
rc = -1;
goto out;
}
rc = record__mmap(rec);
if (rc)
goto out;
session->evlist = evlist;
perf_session__set_id_hdr_size(session);
out:
return rc;
}
perf record: Show precise number of samples After perf record finishes, it prints file size and number of samples in the file but this info is wrong since it assumes typical sample size of 24 bytes and divides file size by the value. However as we post-process recorded samples for build-id, it can show correct number like below. If build-id post-processing is not requested just omit the wrong number of samples. $ perf record noploop 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.159 MB perf.data (3989 samples) ] $ perf report --stdio -n # To display the perf.data header info, please use --header/--header-only options. # # Samples: 3K of event 'cycles' # Event count (approx.): 3771330663 # # Overhead Samples Command Shared Object Symbol # ........ ............ ....... ................ .......................... # 99.90% 3982 noploop noploop [.] main 0.09% 1 noploop ld-2.17.so [.] _dl_check_map_versions 0.01% 1 noploop [kernel.vmlinux] [k] setup_arg_pages 0.00% 5 noploop [kernel.vmlinux] [k] intel_pmu_enable_all Reported-by: Milian Wolff <mail@milianw.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1422518843-25818-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-29 16:06:44 +08:00
static int process_sample_event(struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct perf_evsel *evsel,
struct machine *machine)
{
struct record *rec = container_of(tool, struct record, tool);
perf record: Record the first and last sample time in the header In the default 'perf record' configuration, all samples are processed, to create the HEADER_BUILD_ID table. So it's very easy to get the first/last samples and save the time to perf file header via the function write_sample_time(). Later, at post processing time, perf report/script will fetch the time from perf file header. Committer testing: # perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.099 MB perf.data (1101 samples) ] [root@jouet home]# perf report --header | grep "time of " # time of first sample : 22947.909226 # time of last sample : 22948.910704 # # perf report -D | grep PERF_RECORD_SAMPLE\( 0 22947909226101 0x20bb68 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa21b1af3 period: 1 addr: 0 0 22947909229928 0x20bb98 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa200d204 period: 1 addr: 0 <SNIP> 3 22948910397351 0x219360 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 28251/28251: 0xffffffffa22071d8 period: 169518 addr: 0 0 22948910652380 0x20f120 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 198807 addr: 0 2 22948910704034 0x2172d0 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 88111 addr: 0 # Changelog: v7: Just update the patch description according to Arnaldo's suggestion. v6: Currently '--buildid-all' is not enabled at default. So the walking on all samples is the default operation. There is no big overhead to calculate the timestamp boundary in process_sample_event handler once we already go through all samples. So the timestamp boundary calculation is enabled by default when '--buildid-all' is not enabled. While if '--buildid-all' is enabled, we creates a new option "--timestamp-boundary" for user to decide if it enables the timestamp boundary calculation. v5: There is an issue that the sample walking can only work when '--buildid-all' is not enabled. So we need to let the walking be able to work even if '--buildid-all' is enabled and let the processing skips the dso hit marking for this case. At first, I want to provide a new option "--record-time-boundaries". While after consideration, I think a new option is not very necessary. v3: Remove the definitions of first_sample_time and last_sample_time from struct record and directly save them in perf_evlist. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-3-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-12-08 21:13:42 +08:00
if (rec->evlist->first_sample_time == 0)
rec->evlist->first_sample_time = sample->time;
rec->evlist->last_sample_time = sample->time;
perf record: Show precise number of samples After perf record finishes, it prints file size and number of samples in the file but this info is wrong since it assumes typical sample size of 24 bytes and divides file size by the value. However as we post-process recorded samples for build-id, it can show correct number like below. If build-id post-processing is not requested just omit the wrong number of samples. $ perf record noploop 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.159 MB perf.data (3989 samples) ] $ perf report --stdio -n # To display the perf.data header info, please use --header/--header-only options. # # Samples: 3K of event 'cycles' # Event count (approx.): 3771330663 # # Overhead Samples Command Shared Object Symbol # ........ ............ ....... ................ .......................... # 99.90% 3982 noploop noploop [.] main 0.09% 1 noploop ld-2.17.so [.] _dl_check_map_versions 0.01% 1 noploop [kernel.vmlinux] [k] setup_arg_pages 0.00% 5 noploop [kernel.vmlinux] [k] intel_pmu_enable_all Reported-by: Milian Wolff <mail@milianw.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1422518843-25818-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-29 16:06:44 +08:00
perf record: Record the first and last sample time in the header In the default 'perf record' configuration, all samples are processed, to create the HEADER_BUILD_ID table. So it's very easy to get the first/last samples and save the time to perf file header via the function write_sample_time(). Later, at post processing time, perf report/script will fetch the time from perf file header. Committer testing: # perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.099 MB perf.data (1101 samples) ] [root@jouet home]# perf report --header | grep "time of " # time of first sample : 22947.909226 # time of last sample : 22948.910704 # # perf report -D | grep PERF_RECORD_SAMPLE\( 0 22947909226101 0x20bb68 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa21b1af3 period: 1 addr: 0 0 22947909229928 0x20bb98 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa200d204 period: 1 addr: 0 <SNIP> 3 22948910397351 0x219360 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 28251/28251: 0xffffffffa22071d8 period: 169518 addr: 0 0 22948910652380 0x20f120 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 198807 addr: 0 2 22948910704034 0x2172d0 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 88111 addr: 0 # Changelog: v7: Just update the patch description according to Arnaldo's suggestion. v6: Currently '--buildid-all' is not enabled at default. So the walking on all samples is the default operation. There is no big overhead to calculate the timestamp boundary in process_sample_event handler once we already go through all samples. So the timestamp boundary calculation is enabled by default when '--buildid-all' is not enabled. While if '--buildid-all' is enabled, we creates a new option "--timestamp-boundary" for user to decide if it enables the timestamp boundary calculation. v5: There is an issue that the sample walking can only work when '--buildid-all' is not enabled. So we need to let the walking be able to work even if '--buildid-all' is enabled and let the processing skips the dso hit marking for this case. At first, I want to provide a new option "--record-time-boundaries". While after consideration, I think a new option is not very necessary. v3: Remove the definitions of first_sample_time and last_sample_time from struct record and directly save them in perf_evlist. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-3-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-12-08 21:13:42 +08:00
if (rec->buildid_all)
return 0;
rec->samples++;
perf record: Show precise number of samples After perf record finishes, it prints file size and number of samples in the file but this info is wrong since it assumes typical sample size of 24 bytes and divides file size by the value. However as we post-process recorded samples for build-id, it can show correct number like below. If build-id post-processing is not requested just omit the wrong number of samples. $ perf record noploop 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.159 MB perf.data (3989 samples) ] $ perf report --stdio -n # To display the perf.data header info, please use --header/--header-only options. # # Samples: 3K of event 'cycles' # Event count (approx.): 3771330663 # # Overhead Samples Command Shared Object Symbol # ........ ............ ....... ................ .......................... # 99.90% 3982 noploop noploop [.] main 0.09% 1 noploop ld-2.17.so [.] _dl_check_map_versions 0.01% 1 noploop [kernel.vmlinux] [k] setup_arg_pages 0.00% 5 noploop [kernel.vmlinux] [k] intel_pmu_enable_all Reported-by: Milian Wolff <mail@milianw.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1422518843-25818-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-29 16:06:44 +08:00
return build_id__mark_dso_hit(tool, event, sample, evsel, machine);
}
static int process_buildids(struct record *rec)
{
struct perf_session *session = rec->session;
if (perf_data__size(&rec->data) == 0)
return 0;
perf record: Do not save pathname in ./debug/.build-id directory for vmlinux When perf record finishes a session, it pre-processes samples in order to write build-id info from DSOs that had samples. During this process it'll call map__load() for the kernel map, and it ends up calling dso__load_vmlinux_path() which replaces dso->long_name. But this function checks kernel's build-id before searching vmlinux path so it'll end up with a cryptic name, the pathname for the entry in the ~/.debug cache, which can be confusing to users. This patch adds a flag to skip the build-id check during record, so that it'll have the original vmlinux path for the kernel dso->long_name, not the entry in the ~/.debug cache. Before: # perf record -va sleep 3 mmap size 528384B [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.196 MB perf.data (~8545 samples) ] Looking at the vmlinux_path (7 entries long) Using /home/namhyung/.debug/.build-id/f0/6e17aa50adf4d00b88925e03775de107611551 for symbols After: # perf record -va sleep 3 mmap size 528384B [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.193 MB perf.data (~8432 samples) ] Looking at the vmlinux_path (7 entries long) Using /lib/modules/3.16.4-1-ARCH/build/vmlinux for symbols Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1415063674-17206-7-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-04 09:14:32 +08:00
/*
* During this process, it'll load kernel map and replace the
* dso->long_name to a real pathname it found. In this case
* we prefer the vmlinux path like
* /lib/modules/3.16.4/build/vmlinux
*
* rather than build-id path (in debug directory).
* $HOME/.debug/.build-id/f0/6e17aa50adf4d00b88925e03775de107611551
*/
symbol_conf.ignore_vmlinux_buildid = true;
/*
* If --buildid-all is given, it marks all DSO regardless of hits,
perf record: Record the first and last sample time in the header In the default 'perf record' configuration, all samples are processed, to create the HEADER_BUILD_ID table. So it's very easy to get the first/last samples and save the time to perf file header via the function write_sample_time(). Later, at post processing time, perf report/script will fetch the time from perf file header. Committer testing: # perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.099 MB perf.data (1101 samples) ] [root@jouet home]# perf report --header | grep "time of " # time of first sample : 22947.909226 # time of last sample : 22948.910704 # # perf report -D | grep PERF_RECORD_SAMPLE\( 0 22947909226101 0x20bb68 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa21b1af3 period: 1 addr: 0 0 22947909229928 0x20bb98 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa200d204 period: 1 addr: 0 <SNIP> 3 22948910397351 0x219360 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 28251/28251: 0xffffffffa22071d8 period: 169518 addr: 0 0 22948910652380 0x20f120 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 198807 addr: 0 2 22948910704034 0x2172d0 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 88111 addr: 0 # Changelog: v7: Just update the patch description according to Arnaldo's suggestion. v6: Currently '--buildid-all' is not enabled at default. So the walking on all samples is the default operation. There is no big overhead to calculate the timestamp boundary in process_sample_event handler once we already go through all samples. So the timestamp boundary calculation is enabled by default when '--buildid-all' is not enabled. While if '--buildid-all' is enabled, we creates a new option "--timestamp-boundary" for user to decide if it enables the timestamp boundary calculation. v5: There is an issue that the sample walking can only work when '--buildid-all' is not enabled. So we need to let the walking be able to work even if '--buildid-all' is enabled and let the processing skips the dso hit marking for this case. At first, I want to provide a new option "--record-time-boundaries". While after consideration, I think a new option is not very necessary. v3: Remove the definitions of first_sample_time and last_sample_time from struct record and directly save them in perf_evlist. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-3-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-12-08 21:13:42 +08:00
* so no need to process samples. But if timestamp_boundary is enabled,
* it still needs to walk on all samples to get the timestamps of
* first/last samples.
*/
perf record: Record the first and last sample time in the header In the default 'perf record' configuration, all samples are processed, to create the HEADER_BUILD_ID table. So it's very easy to get the first/last samples and save the time to perf file header via the function write_sample_time(). Later, at post processing time, perf report/script will fetch the time from perf file header. Committer testing: # perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.099 MB perf.data (1101 samples) ] [root@jouet home]# perf report --header | grep "time of " # time of first sample : 22947.909226 # time of last sample : 22948.910704 # # perf report -D | grep PERF_RECORD_SAMPLE\( 0 22947909226101 0x20bb68 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa21b1af3 period: 1 addr: 0 0 22947909229928 0x20bb98 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa200d204 period: 1 addr: 0 <SNIP> 3 22948910397351 0x219360 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 28251/28251: 0xffffffffa22071d8 period: 169518 addr: 0 0 22948910652380 0x20f120 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 198807 addr: 0 2 22948910704034 0x2172d0 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 88111 addr: 0 # Changelog: v7: Just update the patch description according to Arnaldo's suggestion. v6: Currently '--buildid-all' is not enabled at default. So the walking on all samples is the default operation. There is no big overhead to calculate the timestamp boundary in process_sample_event handler once we already go through all samples. So the timestamp boundary calculation is enabled by default when '--buildid-all' is not enabled. While if '--buildid-all' is enabled, we creates a new option "--timestamp-boundary" for user to decide if it enables the timestamp boundary calculation. v5: There is an issue that the sample walking can only work when '--buildid-all' is not enabled. So we need to let the walking be able to work even if '--buildid-all' is enabled and let the processing skips the dso hit marking for this case. At first, I want to provide a new option "--record-time-boundaries". While after consideration, I think a new option is not very necessary. v3: Remove the definitions of first_sample_time and last_sample_time from struct record and directly save them in perf_evlist. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-3-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-12-08 21:13:42 +08:00
if (rec->buildid_all && !rec->timestamp_boundary)
rec->tool.sample = NULL;
return perf_session__process_events(session);
}
static void perf_event__synthesize_guest_os(struct machine *machine, void *data)
{
int err;
struct perf_tool *tool = data;
/*
*As for guest kernel when processing subcommand record&report,
*we arrange module mmap prior to guest kernel mmap and trigger
*a preload dso because default guest module symbols are loaded
*from guest kallsyms instead of /lib/modules/XXX/XXX. This
*method is used to avoid symbol missing when the first addr is
*in module instead of in guest kernel.
*/
err = perf_event__synthesize_modules(tool, process_synthesized_event,
machine);
if (err < 0)
pr_err("Couldn't record guest kernel [%d]'s reference"
" relocation symbol.\n", machine->pid);
/*
* We use _stext for guest kernel because guest kernel's /proc/kallsyms
* have no _text sometimes.
*/
err = perf_event__synthesize_kernel_mmap(tool, process_synthesized_event,
machine);
if (err < 0)
pr_err("Couldn't record guest kernel [%d]'s reference"
" relocation symbol.\n", machine->pid);
}
static struct perf_event_header finished_round_event = {
.size = sizeof(struct perf_event_header),
.type = PERF_RECORD_FINISHED_ROUND,
};
static void record__adjust_affinity(struct record *rec, struct perf_mmap *map)
{
if (rec->opts.affinity != PERF_AFFINITY_SYS &&
!CPU_EQUAL(&rec->affinity_mask, &map->affinity_mask)) {
CPU_ZERO(&rec->affinity_mask);
CPU_OR(&rec->affinity_mask, &rec->affinity_mask, &map->affinity_mask);
sched_setaffinity(0, sizeof(rec->affinity_mask), &rec->affinity_mask);
}
}
static int record__mmap_read_evlist(struct record *rec, struct perf_evlist *evlist,
bool overwrite)
{
u64 bytes_written = rec->bytes_written;
int i;
int rc = 0;
struct perf_mmap *maps;
int trace_fd = rec->data.file.fd;
off_t off;
if (!evlist)
return 0;
maps = overwrite ? evlist->overwrite_mmap : evlist->mmap;
if (!maps)
return 0;
if (overwrite && evlist->bkw_mmap_state != BKW_MMAP_DATA_PENDING)
perf evlist: Setup backward mmap state machine Introduce a bkw_mmap_state state machine to evlist: .________________(forbid)_____________. | V NOTREADY --(0)--> RUNNING --(1)--> DATA_PENDING --(2)--> EMPTY ^ ^ | ^ | | |__(forbid)____/ |___(forbid)___/| | | \_________________(3)_______________/ NOTREADY : Backward ring buffers are not ready RUNNING : Backward ring buffers are recording DATA_PENDING : We are required to collect data from backward ring buffers EMPTY : We have collected data from backward ring buffers. (0): Setup backward ring buffer (1): Pause ring buffers for reading (2): Read from ring buffers (3): Resume ring buffers for recording We can't avoid this complexity. Since we deliberately drop records from overwritable ring buffer, there's no way for us to check remaining from ring buffer itself (by checking head and old pointers). Therefore, we need DATA_PENDING and EMPTY state to help us recording what we have done to the ring buffer. In record__mmap_read_evlist(), drive this state machine from DATA_PENDING to EMPTY. In perf_evlist__mmap_per_evsel(), drive this state machine from NOTREADY to RUNNING when creating backward mmap. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: He Kuang <hekuang@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-11-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:42 +08:00
return 0;
if (record__aio_enabled(rec))
off = record__aio_get_pos(trace_fd);
for (i = 0; i < evlist->nr_mmaps; i++) {
struct perf_mmap *map = &maps[i];
if (map->base) {
record__adjust_affinity(rec, map);
if (!record__aio_enabled(rec)) {
if (perf_mmap__push(map, rec, record__pushfn) != 0) {
rc = -1;
goto out;
}
} else {
int idx;
/*
* Call record__aio_sync() to wait till map->data buffer
* becomes available after previous aio write request.
*/
idx = record__aio_sync(map, false);
if (perf_mmap__aio_push(map, rec, idx, record__aio_pushfn, &off) != 0) {
record__aio_set_pos(trace_fd, off);
rc = -1;
goto out;
}
}
}
if (map->auxtrace_mmap.base && !rec->opts.auxtrace_snapshot_mode &&
record__auxtrace_mmap_read(rec, map) != 0) {
rc = -1;
goto out;
}
}
if (record__aio_enabled(rec))
record__aio_set_pos(trace_fd, off);
/*
* Mark the round finished in case we wrote
* at least one event.
*/
if (bytes_written != rec->bytes_written)
rc = record__write(rec, NULL, &finished_round_event, sizeof(finished_round_event));
if (overwrite)
perf evlist: Setup backward mmap state machine Introduce a bkw_mmap_state state machine to evlist: .________________(forbid)_____________. | V NOTREADY --(0)--> RUNNING --(1)--> DATA_PENDING --(2)--> EMPTY ^ ^ | ^ | | |__(forbid)____/ |___(forbid)___/| | | \_________________(3)_______________/ NOTREADY : Backward ring buffers are not ready RUNNING : Backward ring buffers are recording DATA_PENDING : We are required to collect data from backward ring buffers EMPTY : We have collected data from backward ring buffers. (0): Setup backward ring buffer (1): Pause ring buffers for reading (2): Read from ring buffers (3): Resume ring buffers for recording We can't avoid this complexity. Since we deliberately drop records from overwritable ring buffer, there's no way for us to check remaining from ring buffer itself (by checking head and old pointers). Therefore, we need DATA_PENDING and EMPTY state to help us recording what we have done to the ring buffer. In record__mmap_read_evlist(), drive this state machine from DATA_PENDING to EMPTY. In perf_evlist__mmap_per_evsel(), drive this state machine from NOTREADY to RUNNING when creating backward mmap. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: He Kuang <hekuang@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-11-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:42 +08:00
perf_evlist__toggle_bkw_mmap(evlist, BKW_MMAP_EMPTY);
out:
return rc;
}
static int record__mmap_read_all(struct record *rec)
{
int err;
err = record__mmap_read_evlist(rec, rec->evlist, false);
if (err)
return err;
return record__mmap_read_evlist(rec, rec->evlist, true);
}
static void record__init_features(struct record *rec)
{
struct perf_session *session = rec->session;
int feat;
for (feat = HEADER_FIRST_FEATURE; feat < HEADER_LAST_FEATURE; feat++)
perf_header__set_feat(&session->header, feat);
if (rec->no_buildid)
perf_header__clear_feat(&session->header, HEADER_BUILD_ID);
if (!have_tracepoints(&rec->evlist->entries))
perf_header__clear_feat(&session->header, HEADER_TRACING_DATA);
if (!rec->opts.branch_stack)
perf_header__clear_feat(&session->header, HEADER_BRANCH_STACK);
if (!rec->opts.full_auxtrace)
perf_header__clear_feat(&session->header, HEADER_AUXTRACE);
if (!(rec->opts.use_clockid && rec->opts.clockid_res_ns))
perf_header__clear_feat(&session->header, HEADER_CLOCKID);
perf_header__clear_feat(&session->header, HEADER_DIR_FORMAT);
perf_header__clear_feat(&session->header, HEADER_STAT);
}
static void
record__finish_output(struct record *rec)
{
struct perf_data *data = &rec->data;
int fd = perf_data__fd(data);
if (data->is_pipe)
return;
rec->session->header.data_size += rec->bytes_written;
data->file.size = lseek(perf_data__fd(data), 0, SEEK_CUR);
if (!rec->no_buildid) {
process_buildids(rec);
if (rec->buildid_all)
dsos__hit_all(rec->session);
}
perf_session__write_header(rec->session, rec->evlist, fd, true);
return;
}
perf record: Add --tail-synthesize option When working with overwritable ring buffer there's a inconvenience problem: if perf dumps data after a long period after it starts, non-sample events may lost, which makes following 'perf report' unable to identify proc name and mmap layout. For example: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output \ dd if=/dev/zero of=/dev/null send SIGUSR2 after dd runs long enough. The resuling perf.data lost correct comm and mmap events: # perf script -i perf.data.2016061522374354 perf 24478 [004] 2581325.601789: raw_syscalls:sys_exit: NR 0 = 512 ^^^^ Should be 'dd' 27b2e8 syscall_slow_exit_work+0xfe2000e3 (/lib/modules/4.6.0-rc3+/build/vmlinux) 203cc7 do_syscall_64+0xfe200117 (/lib/modules/4.6.0-rc3+/build/vmlinux) b18d83 return_from_SYSCALL_64+0xfe200000 (/lib/modules/4.6.0-rc3+/build/vmlinux) 7f47c417edf0 [unknown] ([unknown]) ^^^^^^^^^^^^ Fail to unwind This patch provides a '--tail-synthesize' option, allows perf to collect system status when finalizing output file. In resuling output file, the non-sample events reflect system status when dumping data. After this patch: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output --tail-synthesize \ dd if=/dev/zero of=/dev/null # perf script -i perf.data.2016061600544998 dd 27364 [004] 2583244.994464: raw_syscalls:sys_enter: NR 1 (1, ... ^^ Correct comm 203a18 syscall_trace_enter_phase2+0xfe2001a8 ([kernel.kallsyms]) 203aa5 syscall_trace_enter+0xfe200055 ([kernel.kallsyms]) 203caa do_syscall_64+0xfe2000fa ([kernel.kallsyms]) b18d83 return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms]) d8e50 __GI___libc_write+0xffff01d9639f4010 (/tmp/oxygen_root-w00229757/lib64/libc-2.18.so) ^^^^^ Correct unwind This option doesn't aim to solve this problem completely. If a process terminates before SIGUSR2, we still lost its COMM and MMAP events. For example, we can't unwind correctly from the final perf.data we get from the previous example, because when perf collects the final output file (when we press C-c), 'dd' has been terminated so its '/proc/<pid>/mmap' becomes empty. However, this is a cheaper choice. To completely solve this problem we need to continously output non-sample events. To satisify the requirement of daemonization, we need to merge them periodically. It is possible but requires much more code and cycles. Automatically select --tail-synthesize when --overwrite is provided. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-16-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:47 +08:00
static int record__synthesize_workload(struct record *rec, bool tail)
{
int err;
struct thread_map *thread_map;
perf record: Add --tail-synthesize option When working with overwritable ring buffer there's a inconvenience problem: if perf dumps data after a long period after it starts, non-sample events may lost, which makes following 'perf report' unable to identify proc name and mmap layout. For example: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output \ dd if=/dev/zero of=/dev/null send SIGUSR2 after dd runs long enough. The resuling perf.data lost correct comm and mmap events: # perf script -i perf.data.2016061522374354 perf 24478 [004] 2581325.601789: raw_syscalls:sys_exit: NR 0 = 512 ^^^^ Should be 'dd' 27b2e8 syscall_slow_exit_work+0xfe2000e3 (/lib/modules/4.6.0-rc3+/build/vmlinux) 203cc7 do_syscall_64+0xfe200117 (/lib/modules/4.6.0-rc3+/build/vmlinux) b18d83 return_from_SYSCALL_64+0xfe200000 (/lib/modules/4.6.0-rc3+/build/vmlinux) 7f47c417edf0 [unknown] ([unknown]) ^^^^^^^^^^^^ Fail to unwind This patch provides a '--tail-synthesize' option, allows perf to collect system status when finalizing output file. In resuling output file, the non-sample events reflect system status when dumping data. After this patch: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output --tail-synthesize \ dd if=/dev/zero of=/dev/null # perf script -i perf.data.2016061600544998 dd 27364 [004] 2583244.994464: raw_syscalls:sys_enter: NR 1 (1, ... ^^ Correct comm 203a18 syscall_trace_enter_phase2+0xfe2001a8 ([kernel.kallsyms]) 203aa5 syscall_trace_enter+0xfe200055 ([kernel.kallsyms]) 203caa do_syscall_64+0xfe2000fa ([kernel.kallsyms]) b18d83 return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms]) d8e50 __GI___libc_write+0xffff01d9639f4010 (/tmp/oxygen_root-w00229757/lib64/libc-2.18.so) ^^^^^ Correct unwind This option doesn't aim to solve this problem completely. If a process terminates before SIGUSR2, we still lost its COMM and MMAP events. For example, we can't unwind correctly from the final perf.data we get from the previous example, because when perf collects the final output file (when we press C-c), 'dd' has been terminated so its '/proc/<pid>/mmap' becomes empty. However, this is a cheaper choice. To completely solve this problem we need to continously output non-sample events. To satisify the requirement of daemonization, we need to merge them periodically. It is possible but requires much more code and cycles. Automatically select --tail-synthesize when --overwrite is provided. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-16-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:47 +08:00
if (rec->opts.tail_synthesize != tail)
return 0;
thread_map = thread_map__new_by_tid(rec->evlist->workload.pid);
if (thread_map == NULL)
return -1;
err = perf_event__synthesize_thread_map(&rec->tool, thread_map,
process_synthesized_event,
&rec->session->machines.host,
rec->opts.sample_address);
thread_map__put(thread_map);
return err;
}
perf record: Add --tail-synthesize option When working with overwritable ring buffer there's a inconvenience problem: if perf dumps data after a long period after it starts, non-sample events may lost, which makes following 'perf report' unable to identify proc name and mmap layout. For example: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output \ dd if=/dev/zero of=/dev/null send SIGUSR2 after dd runs long enough. The resuling perf.data lost correct comm and mmap events: # perf script -i perf.data.2016061522374354 perf 24478 [004] 2581325.601789: raw_syscalls:sys_exit: NR 0 = 512 ^^^^ Should be 'dd' 27b2e8 syscall_slow_exit_work+0xfe2000e3 (/lib/modules/4.6.0-rc3+/build/vmlinux) 203cc7 do_syscall_64+0xfe200117 (/lib/modules/4.6.0-rc3+/build/vmlinux) b18d83 return_from_SYSCALL_64+0xfe200000 (/lib/modules/4.6.0-rc3+/build/vmlinux) 7f47c417edf0 [unknown] ([unknown]) ^^^^^^^^^^^^ Fail to unwind This patch provides a '--tail-synthesize' option, allows perf to collect system status when finalizing output file. In resuling output file, the non-sample events reflect system status when dumping data. After this patch: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output --tail-synthesize \ dd if=/dev/zero of=/dev/null # perf script -i perf.data.2016061600544998 dd 27364 [004] 2583244.994464: raw_syscalls:sys_enter: NR 1 (1, ... ^^ Correct comm 203a18 syscall_trace_enter_phase2+0xfe2001a8 ([kernel.kallsyms]) 203aa5 syscall_trace_enter+0xfe200055 ([kernel.kallsyms]) 203caa do_syscall_64+0xfe2000fa ([kernel.kallsyms]) b18d83 return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms]) d8e50 __GI___libc_write+0xffff01d9639f4010 (/tmp/oxygen_root-w00229757/lib64/libc-2.18.so) ^^^^^ Correct unwind This option doesn't aim to solve this problem completely. If a process terminates before SIGUSR2, we still lost its COMM and MMAP events. For example, we can't unwind correctly from the final perf.data we get from the previous example, because when perf collects the final output file (when we press C-c), 'dd' has been terminated so its '/proc/<pid>/mmap' becomes empty. However, this is a cheaper choice. To completely solve this problem we need to continously output non-sample events. To satisify the requirement of daemonization, we need to merge them periodically. It is possible but requires much more code and cycles. Automatically select --tail-synthesize when --overwrite is provided. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-16-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:47 +08:00
static int record__synthesize(struct record *rec, bool tail);
perf record: Split output into multiple files via '--switch-output' Allow 'perf record' to split its output into multiple files. For example: # ~/perf record -a --timestamp-filename --switch-output & [1] 10763 # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314468 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314762 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] #[ perf record: Dump perf.data.2015122622315171 ] # fg perf record -a --timestamp-filename --switch-output ^C[ perf record: Woken up 1 times to write data ] [ perf record: Dump perf.data.2015122622315513 ] [ perf record: Captured and wrote 0.014 MB perf.data.<timestamp> (296 samples) ] # ls -l total 920 -rw------- 1 root root 797692 Dec 26 22:31 perf.data.2015122622314468 -rw------- 1 root root 59960 Dec 26 22:31 perf.data.2015122622314762 -rw------- 1 root root 59912 Dec 26 22:31 perf.data.2015122622315171 -rw------- 1 root root 19220 Dec 26 22:31 perf.data.2015122622315513 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1461178794-40467-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Added man page entry, used the re-synthesize patch in this series as a fixup ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 02:59:50 +08:00
static int
record__switch_output(struct record *rec, bool at_exit)
{
struct perf_data *data = &rec->data;
int fd, err;
char *new_filename;
/* Same Size: "2015122520103046"*/
char timestamp[] = "InvalidTimestamp";
record__aio_mmap_read_sync(rec);
perf record: Add --tail-synthesize option When working with overwritable ring buffer there's a inconvenience problem: if perf dumps data after a long period after it starts, non-sample events may lost, which makes following 'perf report' unable to identify proc name and mmap layout. For example: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output \ dd if=/dev/zero of=/dev/null send SIGUSR2 after dd runs long enough. The resuling perf.data lost correct comm and mmap events: # perf script -i perf.data.2016061522374354 perf 24478 [004] 2581325.601789: raw_syscalls:sys_exit: NR 0 = 512 ^^^^ Should be 'dd' 27b2e8 syscall_slow_exit_work+0xfe2000e3 (/lib/modules/4.6.0-rc3+/build/vmlinux) 203cc7 do_syscall_64+0xfe200117 (/lib/modules/4.6.0-rc3+/build/vmlinux) b18d83 return_from_SYSCALL_64+0xfe200000 (/lib/modules/4.6.0-rc3+/build/vmlinux) 7f47c417edf0 [unknown] ([unknown]) ^^^^^^^^^^^^ Fail to unwind This patch provides a '--tail-synthesize' option, allows perf to collect system status when finalizing output file. In resuling output file, the non-sample events reflect system status when dumping data. After this patch: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output --tail-synthesize \ dd if=/dev/zero of=/dev/null # perf script -i perf.data.2016061600544998 dd 27364 [004] 2583244.994464: raw_syscalls:sys_enter: NR 1 (1, ... ^^ Correct comm 203a18 syscall_trace_enter_phase2+0xfe2001a8 ([kernel.kallsyms]) 203aa5 syscall_trace_enter+0xfe200055 ([kernel.kallsyms]) 203caa do_syscall_64+0xfe2000fa ([kernel.kallsyms]) b18d83 return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms]) d8e50 __GI___libc_write+0xffff01d9639f4010 (/tmp/oxygen_root-w00229757/lib64/libc-2.18.so) ^^^^^ Correct unwind This option doesn't aim to solve this problem completely. If a process terminates before SIGUSR2, we still lost its COMM and MMAP events. For example, we can't unwind correctly from the final perf.data we get from the previous example, because when perf collects the final output file (when we press C-c), 'dd' has been terminated so its '/proc/<pid>/mmap' becomes empty. However, this is a cheaper choice. To completely solve this problem we need to continously output non-sample events. To satisify the requirement of daemonization, we need to merge them periodically. It is possible but requires much more code and cycles. Automatically select --tail-synthesize when --overwrite is provided. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-16-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:47 +08:00
record__synthesize(rec, true);
if (target__none(&rec->opts.target))
record__synthesize_workload(rec, true);
rec->samples = 0;
record__finish_output(rec);
err = fetch_current_timestamp(timestamp, sizeof(timestamp));
if (err) {
pr_err("Failed to get current timestamp\n");
return -EINVAL;
}
fd = perf_data__switch(data, timestamp,
rec->session->header.data_offset,
at_exit, &new_filename);
if (fd >= 0 && !at_exit) {
rec->bytes_written = 0;
rec->session->header.data_size = 0;
}
if (!quiet)
fprintf(stderr, "[ perf record: Dump %s.%s ]\n",
data->path, timestamp);
perf record: Split output into multiple files via '--switch-output' Allow 'perf record' to split its output into multiple files. For example: # ~/perf record -a --timestamp-filename --switch-output & [1] 10763 # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314468 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314762 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] #[ perf record: Dump perf.data.2015122622315171 ] # fg perf record -a --timestamp-filename --switch-output ^C[ perf record: Woken up 1 times to write data ] [ perf record: Dump perf.data.2015122622315513 ] [ perf record: Captured and wrote 0.014 MB perf.data.<timestamp> (296 samples) ] # ls -l total 920 -rw------- 1 root root 797692 Dec 26 22:31 perf.data.2015122622314468 -rw------- 1 root root 59960 Dec 26 22:31 perf.data.2015122622314762 -rw------- 1 root root 59912 Dec 26 22:31 perf.data.2015122622315171 -rw------- 1 root root 19220 Dec 26 22:31 perf.data.2015122622315513 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1461178794-40467-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Added man page entry, used the re-synthesize patch in this series as a fixup ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 02:59:50 +08:00
if (rec->switch_output.num_files) {
int n = rec->switch_output.cur_file + 1;
if (n >= rec->switch_output.num_files)
n = 0;
rec->switch_output.cur_file = n;
if (rec->switch_output.filenames[n]) {
remove(rec->switch_output.filenames[n]);
free(rec->switch_output.filenames[n]);
}
rec->switch_output.filenames[n] = new_filename;
} else {
free(new_filename);
}
perf record: Split output into multiple files via '--switch-output' Allow 'perf record' to split its output into multiple files. For example: # ~/perf record -a --timestamp-filename --switch-output & [1] 10763 # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314468 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314762 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] #[ perf record: Dump perf.data.2015122622315171 ] # fg perf record -a --timestamp-filename --switch-output ^C[ perf record: Woken up 1 times to write data ] [ perf record: Dump perf.data.2015122622315513 ] [ perf record: Captured and wrote 0.014 MB perf.data.<timestamp> (296 samples) ] # ls -l total 920 -rw------- 1 root root 797692 Dec 26 22:31 perf.data.2015122622314468 -rw------- 1 root root 59960 Dec 26 22:31 perf.data.2015122622314762 -rw------- 1 root root 59912 Dec 26 22:31 perf.data.2015122622315171 -rw------- 1 root root 19220 Dec 26 22:31 perf.data.2015122622315513 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1461178794-40467-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Added man page entry, used the re-synthesize patch in this series as a fixup ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 02:59:50 +08:00
/* Output tracking events */
if (!at_exit) {
perf record: Add --tail-synthesize option When working with overwritable ring buffer there's a inconvenience problem: if perf dumps data after a long period after it starts, non-sample events may lost, which makes following 'perf report' unable to identify proc name and mmap layout. For example: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output \ dd if=/dev/zero of=/dev/null send SIGUSR2 after dd runs long enough. The resuling perf.data lost correct comm and mmap events: # perf script -i perf.data.2016061522374354 perf 24478 [004] 2581325.601789: raw_syscalls:sys_exit: NR 0 = 512 ^^^^ Should be 'dd' 27b2e8 syscall_slow_exit_work+0xfe2000e3 (/lib/modules/4.6.0-rc3+/build/vmlinux) 203cc7 do_syscall_64+0xfe200117 (/lib/modules/4.6.0-rc3+/build/vmlinux) b18d83 return_from_SYSCALL_64+0xfe200000 (/lib/modules/4.6.0-rc3+/build/vmlinux) 7f47c417edf0 [unknown] ([unknown]) ^^^^^^^^^^^^ Fail to unwind This patch provides a '--tail-synthesize' option, allows perf to collect system status when finalizing output file. In resuling output file, the non-sample events reflect system status when dumping data. After this patch: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output --tail-synthesize \ dd if=/dev/zero of=/dev/null # perf script -i perf.data.2016061600544998 dd 27364 [004] 2583244.994464: raw_syscalls:sys_enter: NR 1 (1, ... ^^ Correct comm 203a18 syscall_trace_enter_phase2+0xfe2001a8 ([kernel.kallsyms]) 203aa5 syscall_trace_enter+0xfe200055 ([kernel.kallsyms]) 203caa do_syscall_64+0xfe2000fa ([kernel.kallsyms]) b18d83 return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms]) d8e50 __GI___libc_write+0xffff01d9639f4010 (/tmp/oxygen_root-w00229757/lib64/libc-2.18.so) ^^^^^ Correct unwind This option doesn't aim to solve this problem completely. If a process terminates before SIGUSR2, we still lost its COMM and MMAP events. For example, we can't unwind correctly from the final perf.data we get from the previous example, because when perf collects the final output file (when we press C-c), 'dd' has been terminated so its '/proc/<pid>/mmap' becomes empty. However, this is a cheaper choice. To completely solve this problem we need to continously output non-sample events. To satisify the requirement of daemonization, we need to merge them periodically. It is possible but requires much more code and cycles. Automatically select --tail-synthesize when --overwrite is provided. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-16-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:47 +08:00
record__synthesize(rec, false);
perf record: Split output into multiple files via '--switch-output' Allow 'perf record' to split its output into multiple files. For example: # ~/perf record -a --timestamp-filename --switch-output & [1] 10763 # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314468 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314762 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] #[ perf record: Dump perf.data.2015122622315171 ] # fg perf record -a --timestamp-filename --switch-output ^C[ perf record: Woken up 1 times to write data ] [ perf record: Dump perf.data.2015122622315513 ] [ perf record: Captured and wrote 0.014 MB perf.data.<timestamp> (296 samples) ] # ls -l total 920 -rw------- 1 root root 797692 Dec 26 22:31 perf.data.2015122622314468 -rw------- 1 root root 59960 Dec 26 22:31 perf.data.2015122622314762 -rw------- 1 root root 59912 Dec 26 22:31 perf.data.2015122622315171 -rw------- 1 root root 19220 Dec 26 22:31 perf.data.2015122622315513 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1461178794-40467-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Added man page entry, used the re-synthesize patch in this series as a fixup ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 02:59:50 +08:00
/*
* In 'perf record --switch-output' without -a,
* record__synthesize() in record__switch_output() won't
* generate tracking events because there's no thread_map
* in evlist. Which causes newly created perf.data doesn't
* contain map and comm information.
* Create a fake thread_map and directly call
* perf_event__synthesize_thread_map() for those events.
*/
if (target__none(&rec->opts.target))
perf record: Add --tail-synthesize option When working with overwritable ring buffer there's a inconvenience problem: if perf dumps data after a long period after it starts, non-sample events may lost, which makes following 'perf report' unable to identify proc name and mmap layout. For example: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output \ dd if=/dev/zero of=/dev/null send SIGUSR2 after dd runs long enough. The resuling perf.data lost correct comm and mmap events: # perf script -i perf.data.2016061522374354 perf 24478 [004] 2581325.601789: raw_syscalls:sys_exit: NR 0 = 512 ^^^^ Should be 'dd' 27b2e8 syscall_slow_exit_work+0xfe2000e3 (/lib/modules/4.6.0-rc3+/build/vmlinux) 203cc7 do_syscall_64+0xfe200117 (/lib/modules/4.6.0-rc3+/build/vmlinux) b18d83 return_from_SYSCALL_64+0xfe200000 (/lib/modules/4.6.0-rc3+/build/vmlinux) 7f47c417edf0 [unknown] ([unknown]) ^^^^^^^^^^^^ Fail to unwind This patch provides a '--tail-synthesize' option, allows perf to collect system status when finalizing output file. In resuling output file, the non-sample events reflect system status when dumping data. After this patch: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output --tail-synthesize \ dd if=/dev/zero of=/dev/null # perf script -i perf.data.2016061600544998 dd 27364 [004] 2583244.994464: raw_syscalls:sys_enter: NR 1 (1, ... ^^ Correct comm 203a18 syscall_trace_enter_phase2+0xfe2001a8 ([kernel.kallsyms]) 203aa5 syscall_trace_enter+0xfe200055 ([kernel.kallsyms]) 203caa do_syscall_64+0xfe2000fa ([kernel.kallsyms]) b18d83 return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms]) d8e50 __GI___libc_write+0xffff01d9639f4010 (/tmp/oxygen_root-w00229757/lib64/libc-2.18.so) ^^^^^ Correct unwind This option doesn't aim to solve this problem completely. If a process terminates before SIGUSR2, we still lost its COMM and MMAP events. For example, we can't unwind correctly from the final perf.data we get from the previous example, because when perf collects the final output file (when we press C-c), 'dd' has been terminated so its '/proc/<pid>/mmap' becomes empty. However, this is a cheaper choice. To completely solve this problem we need to continously output non-sample events. To satisify the requirement of daemonization, we need to merge them periodically. It is possible but requires much more code and cycles. Automatically select --tail-synthesize when --overwrite is provided. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-16-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:47 +08:00
record__synthesize_workload(rec, false);
}
return fd;
}
static volatile int workload_exec_errno;
/*
* perf_evlist__prepare_workload will send a SIGUSR1
* if the fork fails, since we asked by setting its
* want_signal to true.
*/
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
static void workload_exec_failed_signal(int signo __maybe_unused,
siginfo_t *info,
void *ucontext __maybe_unused)
{
workload_exec_errno = info->si_value.sival_int;
done = 1;
child_finished = 1;
}
static void snapshot_sig_handler(int sig);
static void alarm_sig_handler(int sig);
int __weak
perf_event__synth_time_conv(const struct perf_event_mmap_page *pc __maybe_unused,
struct perf_tool *tool __maybe_unused,
perf_event__handler_t process __maybe_unused,
struct machine *machine __maybe_unused)
{
return 0;
}
static const struct perf_event_mmap_page *
perf_evlist__pick_pc(struct perf_evlist *evlist)
{
if (evlist) {
if (evlist->mmap && evlist->mmap[0].base)
return evlist->mmap[0].base;
if (evlist->overwrite_mmap && evlist->overwrite_mmap[0].base)
return evlist->overwrite_mmap[0].base;
}
return NULL;
}
static const struct perf_event_mmap_page *record__pick_pc(struct record *rec)
{
const struct perf_event_mmap_page *pc;
pc = perf_evlist__pick_pc(rec->evlist);
if (pc)
return pc;
return NULL;
}
perf record: Add --tail-synthesize option When working with overwritable ring buffer there's a inconvenience problem: if perf dumps data after a long period after it starts, non-sample events may lost, which makes following 'perf report' unable to identify proc name and mmap layout. For example: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output \ dd if=/dev/zero of=/dev/null send SIGUSR2 after dd runs long enough. The resuling perf.data lost correct comm and mmap events: # perf script -i perf.data.2016061522374354 perf 24478 [004] 2581325.601789: raw_syscalls:sys_exit: NR 0 = 512 ^^^^ Should be 'dd' 27b2e8 syscall_slow_exit_work+0xfe2000e3 (/lib/modules/4.6.0-rc3+/build/vmlinux) 203cc7 do_syscall_64+0xfe200117 (/lib/modules/4.6.0-rc3+/build/vmlinux) b18d83 return_from_SYSCALL_64+0xfe200000 (/lib/modules/4.6.0-rc3+/build/vmlinux) 7f47c417edf0 [unknown] ([unknown]) ^^^^^^^^^^^^ Fail to unwind This patch provides a '--tail-synthesize' option, allows perf to collect system status when finalizing output file. In resuling output file, the non-sample events reflect system status when dumping data. After this patch: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output --tail-synthesize \ dd if=/dev/zero of=/dev/null # perf script -i perf.data.2016061600544998 dd 27364 [004] 2583244.994464: raw_syscalls:sys_enter: NR 1 (1, ... ^^ Correct comm 203a18 syscall_trace_enter_phase2+0xfe2001a8 ([kernel.kallsyms]) 203aa5 syscall_trace_enter+0xfe200055 ([kernel.kallsyms]) 203caa do_syscall_64+0xfe2000fa ([kernel.kallsyms]) b18d83 return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms]) d8e50 __GI___libc_write+0xffff01d9639f4010 (/tmp/oxygen_root-w00229757/lib64/libc-2.18.so) ^^^^^ Correct unwind This option doesn't aim to solve this problem completely. If a process terminates before SIGUSR2, we still lost its COMM and MMAP events. For example, we can't unwind correctly from the final perf.data we get from the previous example, because when perf collects the final output file (when we press C-c), 'dd' has been terminated so its '/proc/<pid>/mmap' becomes empty. However, this is a cheaper choice. To completely solve this problem we need to continously output non-sample events. To satisify the requirement of daemonization, we need to merge them periodically. It is possible but requires much more code and cycles. Automatically select --tail-synthesize when --overwrite is provided. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-16-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:47 +08:00
static int record__synthesize(struct record *rec, bool tail)
{
struct perf_session *session = rec->session;
struct machine *machine = &session->machines.host;
struct perf_data *data = &rec->data;
struct record_opts *opts = &rec->opts;
struct perf_tool *tool = &rec->tool;
int fd = perf_data__fd(data);
int err = 0;
perf record: Add --tail-synthesize option When working with overwritable ring buffer there's a inconvenience problem: if perf dumps data after a long period after it starts, non-sample events may lost, which makes following 'perf report' unable to identify proc name and mmap layout. For example: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output \ dd if=/dev/zero of=/dev/null send SIGUSR2 after dd runs long enough. The resuling perf.data lost correct comm and mmap events: # perf script -i perf.data.2016061522374354 perf 24478 [004] 2581325.601789: raw_syscalls:sys_exit: NR 0 = 512 ^^^^ Should be 'dd' 27b2e8 syscall_slow_exit_work+0xfe2000e3 (/lib/modules/4.6.0-rc3+/build/vmlinux) 203cc7 do_syscall_64+0xfe200117 (/lib/modules/4.6.0-rc3+/build/vmlinux) b18d83 return_from_SYSCALL_64+0xfe200000 (/lib/modules/4.6.0-rc3+/build/vmlinux) 7f47c417edf0 [unknown] ([unknown]) ^^^^^^^^^^^^ Fail to unwind This patch provides a '--tail-synthesize' option, allows perf to collect system status when finalizing output file. In resuling output file, the non-sample events reflect system status when dumping data. After this patch: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output --tail-synthesize \ dd if=/dev/zero of=/dev/null # perf script -i perf.data.2016061600544998 dd 27364 [004] 2583244.994464: raw_syscalls:sys_enter: NR 1 (1, ... ^^ Correct comm 203a18 syscall_trace_enter_phase2+0xfe2001a8 ([kernel.kallsyms]) 203aa5 syscall_trace_enter+0xfe200055 ([kernel.kallsyms]) 203caa do_syscall_64+0xfe2000fa ([kernel.kallsyms]) b18d83 return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms]) d8e50 __GI___libc_write+0xffff01d9639f4010 (/tmp/oxygen_root-w00229757/lib64/libc-2.18.so) ^^^^^ Correct unwind This option doesn't aim to solve this problem completely. If a process terminates before SIGUSR2, we still lost its COMM and MMAP events. For example, we can't unwind correctly from the final perf.data we get from the previous example, because when perf collects the final output file (when we press C-c), 'dd' has been terminated so its '/proc/<pid>/mmap' becomes empty. However, this is a cheaper choice. To completely solve this problem we need to continously output non-sample events. To satisify the requirement of daemonization, we need to merge them periodically. It is possible but requires much more code and cycles. Automatically select --tail-synthesize when --overwrite is provided. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-16-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:47 +08:00
if (rec->opts.tail_synthesize != tail)
return 0;
if (data->is_pipe) {
/*
* We need to synthesize events first, because some
* features works on top of them (on report side).
*/
err = perf_event__synthesize_attrs(tool, rec->evlist,
process_synthesized_event);
if (err < 0) {
pr_err("Couldn't synthesize attrs.\n");
goto out;
}
err = perf_event__synthesize_features(tool, session, rec->evlist,
process_synthesized_event);
if (err < 0) {
pr_err("Couldn't synthesize features.\n");
return err;
}
if (have_tracepoints(&rec->evlist->entries)) {
/*
* FIXME err <= 0 here actually means that
* there were no tracepoints so its not really
* an error, just that we don't need to
* synthesize anything. We really have to
* return this more properly and also
* propagate errors that now are calling die()
*/
err = perf_event__synthesize_tracing_data(tool, fd, rec->evlist,
process_synthesized_event);
if (err <= 0) {
pr_err("Couldn't record tracing data.\n");
goto out;
}
rec->bytes_written += err;
}
}
err = perf_event__synth_time_conv(record__pick_pc(rec), tool,
process_synthesized_event, machine);
if (err)
goto out;
if (rec->opts.full_auxtrace) {
err = perf_event__synthesize_auxtrace_info(rec->itr, tool,
session, process_synthesized_event);
if (err)
goto out;
}
perf record: Ignore kptr_restrict when not sampling the kernel If we're not sampling the kernel, we shouldn't care about kptr_restrict neither synthesize anything for assisting in resolving kernel samples, like the reference relocation symbol or kernel modules information. Before: $ cat /proc/sys/kernel/kptr_restrict /proc/sys/kernel/perf_event_paranoid 2 2 $ perf record sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. Couldn't record kernel reference relocation symbol Symbol resolution may be skewed if relocation was used (e.g. kexec). Check /proc/kallsyms permission or run as root. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ] $ perf evlist -v cycles:uppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, exclude_kernel: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 $ After: $ perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (10 samples) ] $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-t025e9zftbx2b8cq2w01g5e5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-14 22:03:19 +08:00
if (!perf_evlist__exclude_kernel(rec->evlist)) {
err = perf_event__synthesize_kernel_mmap(tool, process_synthesized_event,
machine);
WARN_ONCE(err < 0, "Couldn't record kernel reference relocation symbol\n"
"Symbol resolution may be skewed if relocation was used (e.g. kexec).\n"
"Check /proc/kallsyms permission or run as root.\n");
err = perf_event__synthesize_modules(tool, process_synthesized_event,
machine);
WARN_ONCE(err < 0, "Couldn't record kernel module information.\n"
"Symbol resolution may be skewed if relocation was used (e.g. kexec).\n"
"Check /proc/modules permission or run as root.\n");
}
if (perf_guest) {
machines__process_guests(&session->machines,
perf_event__synthesize_guest_os, tool);
}
err = perf_event__synthesize_extra_attr(&rec->tool,
rec->evlist,
process_synthesized_event,
data->is_pipe);
if (err)
goto out;
perf record: Synthesize thread map and cpu map Synthesize the per attr thread maps and cpu maps in 'perf record'. This allows code from 'perf stat' called from 'perf script' to access this information. Committer testing: Please see the PERF_RECORD_THREAD_MAP and PERF_RECORD_CPU_MAP records, added by this patch: $ perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ] $ perf report -D | grep PERF_RECORD_ | head 0xe8 [0x20]: PERF_RECORD_TIME_CONV: unhandled! 0x108 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 23568 0x130 [0x18]: PERF_RECORD_CPU_MAP: 0-3 0 0x148 [0x28]: PERF_RECORD_COMM: perf:23568/23568 0x570 [0x8]: PERF_RECORD_FINISHED_ROUND 445342677837144 0x170 [0x28]: PERF_RECORD_COMM exec: sleep:23568/23568 445342677847339 0x198 [0x68]: PERF_RECORD_MMAP2 23568/23568: [0x564c943a4000(0x208000) @ 0 fd:00 3147174 2566255743]: r-xp /usr/bin/sleep 445342677862450 0x200 [0x70]: PERF_RECORD_MMAP2 23568/23568: [0x7f25968a8000(0x229000) @ 0 fd:00 3151761 2566238119]: r-xp /usr/lib64/ld-2.25.so 445342677873174 0x270 [0x60]: PERF_RECORD_MMAP2 23568/23568: [0x7ffc98176000(0x2000) @ 0 00:00 0 0]: r-xp [vdso] 445342677891928 0x2d0 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4002): 23568/23568: 0xffffffff8f84c7e7 period: 1 addr: 0 $ Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/r/20171117214300.32746-3-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-18 05:42:59 +08:00
err = perf_event__synthesize_thread_map2(&rec->tool, rec->evlist->threads,
process_synthesized_event,
NULL);
if (err < 0) {
pr_err("Couldn't synthesize thread map.\n");
return err;
}
err = perf_event__synthesize_cpu_map(&rec->tool, rec->evlist->cpus,
process_synthesized_event, NULL);
if (err < 0) {
pr_err("Couldn't synthesize cpu map.\n");
return err;
}
perf tools: Synthesize PERF_RECORD_* for loaded BPF programs This patch synthesize PERF_RECORD_KSYMBOL and PERF_RECORD_BPF_EVENT for BPF programs loaded before perf-record. This is achieved by gathering information about all BPF programs via sys_bpf. Committer notes: Fix the build on some older systems such as amazonlinux:1 where it was breaking with: util/bpf-event.c: In function 'perf_event__synthesize_one_bpf_prog': util/bpf-event.c:52:9: error: missing initializer for field 'type' of 'struct bpf_prog_info' [-Werror=missing-field-initializers] struct bpf_prog_info info = {}; ^ In file included from /git/linux/tools/lib/bpf/bpf.h:26:0, from util/bpf-event.c:3: /git/linux/tools/include/uapi/linux/bpf.h:2699:8: note: 'type' declared here __u32 type; ^ cc1: all warnings being treated as errors Further fix on a centos:6 system: cc1: warnings being treated as errors util/bpf-event.c: In function 'perf_event__synthesize_one_bpf_prog': util/bpf-event.c:50: error: 'func_info_rec_size' may be used uninitialized in this function The compiler is wrong, but to silence it, initialize that variable to zero. One more fix, this time for debian:experimental-x-mips, x-mips64 and x-mipsel: util/bpf-event.c: In function 'perf_event__synthesize_one_bpf_prog': util/bpf-event.c:93:16: error: implicit declaration of function 'calloc' [-Werror=implicit-function-declaration] func_infos = calloc(sub_prog_cnt, func_info_rec_size); ^~~~~~ util/bpf-event.c:93:16: error: incompatible implicit declaration of built-in function 'calloc' [-Werror] util/bpf-event.c:93:16: note: include '<stdlib.h>' or provide a declaration of 'calloc' Add the missing header. Committer testing: # perf record --bpf-event sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.021 MB perf.data (7 samples) ] # perf report -D | grep PERF_RECORD_BPF_EVENT | nl 1 0 0x4b10 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 13 2 0 0x4c60 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 14 3 0 0x4db0 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 15 4 0 0x4f00 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 16 5 0 0x5050 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 17 6 0 0x51a0 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 18 7 0 0x52f0 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 21 8 0 0x5440 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 22 # bpftool prog 13: cgroup_skb tag 7be49e3934a125ba gpl loaded_at 2019-01-19T09:09:43-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 13,14 14: cgroup_skb tag 2a142ef67aaad174 gpl loaded_at 2019-01-19T09:09:43-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 13,14 15: cgroup_skb tag 7be49e3934a125ba gpl loaded_at 2019-01-19T09:09:43-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 15,16 16: cgroup_skb tag 2a142ef67aaad174 gpl loaded_at 2019-01-19T09:09:43-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 15,16 17: cgroup_skb tag 7be49e3934a125ba gpl loaded_at 2019-01-19T09:09:44-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 17,18 18: cgroup_skb tag 2a142ef67aaad174 gpl loaded_at 2019-01-19T09:09:44-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 17,18 21: cgroup_skb tag 7be49e3934a125ba gpl loaded_at 2019-01-19T09:09:45-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 21,22 22: cgroup_skb tag 2a142ef67aaad174 gpl loaded_at 2019-01-19T09:09:45-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 21,22 # # perf report -D | grep -B22 PERF_RECORD_KSYMBOL . ... raw event: size 312 bytes . 0000: 11 00 00 00 00 00 38 01 ff 44 06 c0 ff ff ff ff ......8..D...... . 0010: e5 00 00 00 01 00 00 00 62 70 66 5f 70 72 6f 67 ........bpf_prog . 0020: 5f 37 62 65 34 39 65 33 39 33 34 61 31 32 35 62 _7be49e3934a125b . 0030: 61 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a............... <SNIP zeroes> . 0110: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 ........!....... . 0120: 7b e4 9e 39 34 a1 25 ba 00 00 00 00 00 00 00 00 {..94.%......... . 0130: 00 00 00 00 00 00 00 00 ........ 0 0x49d8 [0x138]: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc00644ff len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba -- . ... raw event: size 312 bytes . 0000: 11 00 00 00 00 00 38 01 48 6d 06 c0 ff ff ff ff ......8.Hm...... . 0010: e5 00 00 00 01 00 00 00 62 70 66 5f 70 72 6f 67 ........bpf_prog . 0020: 5f 32 61 31 34 32 65 66 36 37 61 61 61 64 31 37 _2a142ef67aaad17 . 0030: 34 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4............... <SNIP zeroes> . 0110: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 ........!....... . 0120: 2a 14 2e f6 7a aa d1 74 00 00 00 00 00 00 00 00 *...z..t........ . 0130: 00 00 00 00 00 00 00 00 ........ 0 0x4b28 [0x138]: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0066d48 len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174 -- . ... raw event: size 312 bytes . 0000: 11 00 00 00 00 00 38 01 04 cf 03 c0 ff ff ff ff ......8......... . 0010: e5 00 00 00 01 00 00 00 62 70 66 5f 70 72 6f 67 ........bpf_prog . 0020: 5f 37 62 65 34 39 65 33 39 33 34 61 31 32 35 62 _7be49e3934a125b . 0030: 61 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a............... <SNIP zeroes> . 0110: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 ........!....... . 0120: 7b e4 9e 39 34 a1 25 ba 00 00 00 00 00 00 00 00 {..94.%......... . 0130: 00 00 00 00 00 00 00 00 ........ 0 0x4c78 [0x138]: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc003cf04 len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba -- . ... raw event: size 312 bytes . 0000: 11 00 00 00 00 00 38 01 96 28 04 c0 ff ff ff ff ......8..(...... . 0010: e5 00 00 00 01 00 00 00 62 70 66 5f 70 72 6f 67 ........bpf_prog . 0020: 5f 32 61 31 34 32 65 66 36 37 61 61 61 64 31 37 _2a142ef67aaad17 . 0030: 34 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4............... <SNIP zeroes> . 0110: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 ........!....... . 0120: 2a 14 2e f6 7a aa d1 74 00 00 00 00 00 00 00 00 *...z..t........ . 0130: 00 00 00 00 00 00 00 00 ........ 0 0x4dc8 [0x138]: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0042896 len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174 -- . ... raw event: size 312 bytes . 0000: 11 00 00 00 00 00 38 01 05 13 17 c0 ff ff ff ff ......8......... . 0010: e5 00 00 00 01 00 00 00 62 70 66 5f 70 72 6f 67 ........bpf_prog . 0020: 5f 37 62 65 34 39 65 33 39 33 34 61 31 32 35 62 _7be49e3934a125b . 0030: 61 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a............... <SNIP zeroes> . 0110: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 ........!....... . 0120: 7b e4 9e 39 34 a1 25 ba 00 00 00 00 00 00 00 00 {..94.%......... . 0130: 00 00 00 00 00 00 00 00 ........ 0 0x4f18 [0x138]: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0171305 len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba -- . ... raw event: size 312 bytes . 0000: 11 00 00 00 00 00 38 01 0a 8c 23 c0 ff ff ff ff ......8...#..... . 0010: e5 00 00 00 01 00 00 00 62 70 66 5f 70 72 6f 67 ........bpf_prog . 0020: 5f 32 61 31 34 32 65 66 36 37 61 61 61 64 31 37 _2a142ef67aaad17 . 0030: 34 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4............... <SNIP zeroes> . 0110: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 ........!....... . 0120: 2a 14 2e f6 7a aa d1 74 00 00 00 00 00 00 00 00 *...z..t........ . 0130: 00 00 00 00 00 00 00 00 ........ 0 0x5068 [0x138]: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0238c0a len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174 -- . ... raw event: size 312 bytes . 0000: 11 00 00 00 00 00 38 01 2a a5 a4 c0 ff ff ff ff ......8.*....... . 0010: e5 00 00 00 01 00 00 00 62 70 66 5f 70 72 6f 67 ........bpf_prog . 0020: 5f 37 62 65 34 39 65 33 39 33 34 61 31 32 35 62 _7be49e3934a125b . 0030: 61 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a............... <SNIP zeroes> . 0110: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 ........!....... . 0120: 7b e4 9e 39 34 a1 25 ba 00 00 00 00 00 00 00 00 {..94.%......... . 0130: 00 00 00 00 00 00 00 00 ........ 0 0x51b8 [0x138]: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0a4a52a len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba -- . ... raw event: size 312 bytes . 0000: 11 00 00 00 00 00 38 01 9b c9 a4 c0 ff ff ff ff ......8......... . 0010: e5 00 00 00 01 00 00 00 62 70 66 5f 70 72 6f 67 ........bpf_prog . 0020: 5f 32 61 31 34 32 65 66 36 37 61 61 61 64 31 37 _2a142ef67aaad17 . 0030: 34 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4............... <SNIP zeroes> . 0110: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 ........!....... . 0120: 2a 14 2e f6 7a aa d1 74 00 00 00 00 00 00 00 00 *...z..t........ . 0130: 00 00 00 00 00 00 00 00 ........ 0 0x5308 [0x138]: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0a4c99b len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174 Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-team@fb.com Cc: netdev@vger.kernel.org Link: http://lkml.kernel.org/r/20190117161521.1341602-8-songliubraving@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-18 00:15:19 +08:00
err = perf_event__synthesize_bpf_events(tool, process_synthesized_event,
machine, opts);
if (err < 0)
pr_warning("Couldn't synthesize bpf events.\n");
err = __machine__synthesize_threads(machine, tool, &opts->target, rec->evlist->threads,
process_synthesized_event, opts->sample_address,
1);
out:
return err;
}
static int __cmd_record(struct record *rec, int argc, const char **argv)
{
int err;
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
int status = 0;
unsigned long waking = 0;
const bool forks = argc > 0;
struct perf_tool *tool = &rec->tool;
struct record_opts *opts = &rec->opts;
struct perf_data *data = &rec->data;
struct perf_session *session;
bool disabled = false, draining = false;
int fd;
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
atexit(record__sig_exit);
signal(SIGCHLD, sig_handler);
signal(SIGINT, sig_handler);
signal(SIGTERM, sig_handler);
signal(SIGSEGV, sigsegv_handler);
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 04:41:43 +08:00
if (rec->opts.record_namespaces)
tool->namespace_events = true;
if (rec->opts.auxtrace_snapshot_mode || rec->switch_output.enabled) {
signal(SIGUSR2, snapshot_sig_handler);
perf record: Split output into multiple files via '--switch-output' Allow 'perf record' to split its output into multiple files. For example: # ~/perf record -a --timestamp-filename --switch-output & [1] 10763 # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314468 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314762 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] #[ perf record: Dump perf.data.2015122622315171 ] # fg perf record -a --timestamp-filename --switch-output ^C[ perf record: Woken up 1 times to write data ] [ perf record: Dump perf.data.2015122622315513 ] [ perf record: Captured and wrote 0.014 MB perf.data.<timestamp> (296 samples) ] # ls -l total 920 -rw------- 1 root root 797692 Dec 26 22:31 perf.data.2015122622314468 -rw------- 1 root root 59960 Dec 26 22:31 perf.data.2015122622314762 -rw------- 1 root root 59912 Dec 26 22:31 perf.data.2015122622315171 -rw------- 1 root root 19220 Dec 26 22:31 perf.data.2015122622315513 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1461178794-40467-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Added man page entry, used the re-synthesize patch in this series as a fixup ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 02:59:50 +08:00
if (rec->opts.auxtrace_snapshot_mode)
trigger_on(&auxtrace_snapshot_trigger);
if (rec->switch_output.enabled)
perf record: Split output into multiple files via '--switch-output' Allow 'perf record' to split its output into multiple files. For example: # ~/perf record -a --timestamp-filename --switch-output & [1] 10763 # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314468 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314762 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] #[ perf record: Dump perf.data.2015122622315171 ] # fg perf record -a --timestamp-filename --switch-output ^C[ perf record: Woken up 1 times to write data ] [ perf record: Dump perf.data.2015122622315513 ] [ perf record: Captured and wrote 0.014 MB perf.data.<timestamp> (296 samples) ] # ls -l total 920 -rw------- 1 root root 797692 Dec 26 22:31 perf.data.2015122622314468 -rw------- 1 root root 59960 Dec 26 22:31 perf.data.2015122622314762 -rw------- 1 root root 59912 Dec 26 22:31 perf.data.2015122622315171 -rw------- 1 root root 19220 Dec 26 22:31 perf.data.2015122622315513 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1461178794-40467-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Added man page entry, used the re-synthesize patch in this series as a fixup ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 02:59:50 +08:00
trigger_on(&switch_output_trigger);
} else {
signal(SIGUSR2, SIG_IGN);
}
session = perf_session__new(data, false, tool);
if (session == NULL) {
pr_err("Perf session creation failed.\n");
return -1;
}
fd = perf_data__fd(data);
rec->session = session;
record__init_features(rec);
if (rec->opts.use_clockid && rec->opts.clockid_res_ns)
session->header.env.clockid_res_ns = rec->opts.clockid_res_ns;
if (forks) {
err = perf_evlist__prepare_workload(rec->evlist, &opts->target,
argv, data->is_pipe,
workload_exec_failed_signal);
if (err < 0) {
pr_err("Couldn't run the workload!\n");
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
status = err;
goto out_delete_session;
}
}
perf record: Fix crash in pipe mode Currently we can crash perf record when running in pipe mode, like: $ perf record ls | perf report # To display the perf.data header info, please use --header/--header-only options. # perf: Segmentation fault Error: The - file has no samples! The callstack of the crash is: 0x0000000000515242 in perf_event__synthesize_event_update_name 3513 ev = event_update_event__new(len + 1, PERF_EVENT_UPDATE__NAME, evsel->id[0]); (gdb) bt #0 0x0000000000515242 in perf_event__synthesize_event_update_name #1 0x00000000005158a4 in perf_event__synthesize_extra_attr #2 0x0000000000443347 in record__synthesize #3 0x00000000004438e3 in __cmd_record #4 0x000000000044514e in cmd_record #5 0x00000000004cbc95 in run_builtin #6 0x00000000004cbf02 in handle_internal_command #7 0x00000000004cc054 in run_argv #8 0x00000000004cc422 in main The reason of the crash is that the evsel does not have ids array allocated and the pipe's synthesize code tries to access it. We don't force evsel ids allocation when we have single event, because it's not needed. However we need it when we are in pipe mode even for single event as a key for evsel update event. Fixing this by forcing evsel ids allocation event for single event, when we are in pipe mode. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180302161354.30192-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-03 00:13:54 +08:00
/*
* If we have just single event and are sending data
* through pipe, we need to force the ids allocation,
* because we synthesize event name through the pipe
* and need the id for that.
*/
if (data->is_pipe && rec->evlist->nr_entries == 1)
rec->opts.sample_id = true;
if (record__open(rec) != 0) {
err = -1;
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
goto out_child;
}
perf record: Apply config to BPF objects before recording bpf__apply_obj_config() is introduced as the core API to apply object config options to all BPF objects. This patch also does the real work for setting values for BPF_MAP_TYPE_PERF_ARRAY maps by inserting value stored in map's private field into the BPF map. This patch is required because we are not always able to set all BPF config during parsing. Further patch will set events created by perf to BPF_MAP_TYPE_PERF_EVENT_ARRAY maps, which is not exist until perf_evsel__open(). bpf_map_foreach_key() is introduced to iterate over each key needs to be configured. This function would be extended to support more map types and different key settings. In perf record, before start recording, call bpf__apply_config() to turn on all BPF config options. Test result: # cat ./test_bpf_map_1.c /************************ BEGIN **************************/ #include <uapi/linux/bpf.h> #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; static void *(*map_lookup_elem)(struct bpf_map_def *, void *) = (void *)BPF_FUNC_map_lookup_elem; static int (*trace_printk)(const char *fmt, int fmt_size, ...) = (void *)BPF_FUNC_trace_printk; struct bpf_map_def SEC("maps") channel = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_nanosleep") int func(void *ctx) { int key = 0; char fmt[] = "%d\n"; int *pval = map_lookup_elem(&channel, &key); if (!pval) return 0; trace_printk(fmt, sizeof(fmt), *pval); return 0; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; /************************* END ***************************/ # echo "" > /sys/kernel/debug/tracing/trace # ./perf record -e './test_bpf_map_1.c/map:channel.value=11/' usleep 10 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.012 MB perf.data ] # cat /sys/kernel/debug/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 1/1 #P:8 [SNIP] # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | usleep-18593 [007] d... 2394714.395539: : 11 # ./perf record -e './test_bpf_map_1.c/map:channel.value=101/' usleep 10 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.012 MB perf.data ] # cat /sys/kernel/debug/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 1/1 #P:8 [SNIP] # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | usleep-18593 [007] d... 2394714.395539: : 11 usleep-19000 [006] d... 2394831.057840: : 101 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 17:10:32 +08:00
err = bpf__apply_obj_config();
if (err) {
char errbuf[BUFSIZ];
bpf__strerror_apply_obj_config(err, errbuf, sizeof(errbuf));
pr_err("ERROR: Apply config to BPF failed: %s\n",
errbuf);
goto out_child;
}
/*
* Normally perf_session__new would do this, but it doesn't have the
* evlist.
*/
if (rec->tool.ordered_events && !perf_evlist__sample_id_all(rec->evlist)) {
pr_warning("WARNING: No sample_id_all support, falling back to unordered processing\n");
rec->tool.ordered_events = false;
}
if (!rec->evlist->nr_groups)
perf_header__clear_feat(&session->header, HEADER_GROUP_DESC);
if (data->is_pipe) {
err = perf_header__write_pipe(fd);
if (err < 0)
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
goto out_child;
} else {
err = perf_session__write_header(session, rec->evlist, fd, false);
if (err < 0)
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
goto out_child;
perf tools: Handle relocatable kernels DSOs don't have this problem because the kernel emits a PERF_MMAP for each new executable mapping it performs on monitored threads. To fix the kernel case we simulate the same behaviour, by having 'perf record' to synthesize a PERF_MMAP for the kernel, encoded like this: [root@doppio ~]# perf record -a -f sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.344 MB perf.data (~15038 samples) ] [root@doppio ~]# perf report -D | head -10 0xd0 [0x40]: event: 1 . . ... raw event: size 64 bytes . 0000: 01 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 ......@........ . 0010: 00 00 00 81 ff ff ff ff 00 00 00 00 00 00 00 00 ............... . 0020: 00 00 00 00 00 00 00 00 5b 6b 65 72 6e 65 6c 2e ........ [kernel . 0030: 6b 61 6c 6c 73 79 6d 73 2e 5f 74 65 78 74 5d 00 kallsyms._text] . 0xd0 [0x40]: PERF_RECORD_MMAP 0/0: [0xffffffff81000000((nil)) @ (nil)]: [kernel.kallsyms._text] I.e. we identify such event as having: .pid = 0 .filename = [kernel.kallsyms.REFNAME] .start = REFNAME addr in /proc/kallsyms at 'perf record' time and use now a hardcoded value of '.text' for REFNAME. Then, later, in 'perf report', if there are any kernel hits and thus we need to resolve kernel symbols, we search for REFNAME and if its address changed, relocation happened and we thus must change the kernel mapping routines to one that uses .pgoff as the relocation to apply. This way we use the same mechanism used for the other DSOs and don't have to do a two pass in all the kernel symbols. Reported-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> LKML-Reference: <1262717431-1246-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-06 02:50:31 +08:00
}
if (!rec->no_buildid
&& !perf_header__has_feat(&session->header, HEADER_BUILD_ID)) {
pr_err("Couldn't generate buildids. "
"Use --no-buildid to profile anyway.\n");
err = -1;
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
goto out_child;
}
perf record: Add --tail-synthesize option When working with overwritable ring buffer there's a inconvenience problem: if perf dumps data after a long period after it starts, non-sample events may lost, which makes following 'perf report' unable to identify proc name and mmap layout. For example: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output \ dd if=/dev/zero of=/dev/null send SIGUSR2 after dd runs long enough. The resuling perf.data lost correct comm and mmap events: # perf script -i perf.data.2016061522374354 perf 24478 [004] 2581325.601789: raw_syscalls:sys_exit: NR 0 = 512 ^^^^ Should be 'dd' 27b2e8 syscall_slow_exit_work+0xfe2000e3 (/lib/modules/4.6.0-rc3+/build/vmlinux) 203cc7 do_syscall_64+0xfe200117 (/lib/modules/4.6.0-rc3+/build/vmlinux) b18d83 return_from_SYSCALL_64+0xfe200000 (/lib/modules/4.6.0-rc3+/build/vmlinux) 7f47c417edf0 [unknown] ([unknown]) ^^^^^^^^^^^^ Fail to unwind This patch provides a '--tail-synthesize' option, allows perf to collect system status when finalizing output file. In resuling output file, the non-sample events reflect system status when dumping data. After this patch: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output --tail-synthesize \ dd if=/dev/zero of=/dev/null # perf script -i perf.data.2016061600544998 dd 27364 [004] 2583244.994464: raw_syscalls:sys_enter: NR 1 (1, ... ^^ Correct comm 203a18 syscall_trace_enter_phase2+0xfe2001a8 ([kernel.kallsyms]) 203aa5 syscall_trace_enter+0xfe200055 ([kernel.kallsyms]) 203caa do_syscall_64+0xfe2000fa ([kernel.kallsyms]) b18d83 return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms]) d8e50 __GI___libc_write+0xffff01d9639f4010 (/tmp/oxygen_root-w00229757/lib64/libc-2.18.so) ^^^^^ Correct unwind This option doesn't aim to solve this problem completely. If a process terminates before SIGUSR2, we still lost its COMM and MMAP events. For example, we can't unwind correctly from the final perf.data we get from the previous example, because when perf collects the final output file (when we press C-c), 'dd' has been terminated so its '/proc/<pid>/mmap' becomes empty. However, this is a cheaper choice. To completely solve this problem we need to continously output non-sample events. To satisify the requirement of daemonization, we need to merge them periodically. It is possible but requires much more code and cycles. Automatically select --tail-synthesize when --overwrite is provided. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-16-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:47 +08:00
err = record__synthesize(rec, false);
if (err < 0)
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
goto out_child;
if (rec->realtime_prio) {
struct sched_param param;
param.sched_priority = rec->realtime_prio;
if (sched_setscheduler(0, SCHED_FIFO, &param)) {
pr_err("Could not set realtime priority.\n");
err = -1;
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
goto out_child;
}
}
perf tools: Fix 'disabled' attribute config for record command Currently the record command sets all events initially as disabled. There's non conditional perf_evlist__enable call, that enables all events before we exec tracee program. That actually screws whole enable_on_exec logic, because the event is enabled before the traced program got executed. What we actually want is: 1) For any type of traced program: - all independent events and group leaders are disabled - all group members are enabled Group members are ruled by group leaders. They need to be enabled, because the group scheduling relies on that. 2) For traced programs executed by perf: - all independent events and group leaders have enable_on_exec set - we don't specifically enable or disable any event during the record command Independent events and group leaders are initially disabled and get enabled by exec. Group members are ruled by group leaders as stated in 1). 3) For traced programs attached by perf (pid/tid): - we specifically enable or disable all events during the record command When attaching events to already running traced we enable/disable events specifically, as there's no initial traced exec call. Fixing appropriate perf_event_attr test case to cover this change. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1352741644-16809-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-11-13 01:34:01 +08:00
/*
* When perf is starting the traced process, all the events
* (apart from group members) have enable_on_exec=1 set,
* so don't spoil it by prematurely enabling them.
*/
if (!target__none(&opts->target) && !opts->initial_delay)
perf_evlist__enable(rec->evlist);
/*
* Let the child rip
*/
perf record: Synthesize COMM event for a command line workload When perf creates a new child to profile, the events are enabled on exec(). And in this case, it doesn't synthesize any event for the child since they'll be generated during exec(). But there's an window between the enabling and the event generation. It used to be overcome since samples are only in kernel (so we always have the map) and the comm is overridden by a later COMM event. However it won't work if events are processed and displayed before the COMM event overrides like in 'perf script'. This leads to those early samples (like native_write_msr_safe) not having a comm but pid (like ':15328'). So it needs to synthesize COMM event for the child explicitly before enabling so that it can have a correct comm. But at this time, the comm will be "perf" since it's not exec-ed yet. Committer note: Before this patch: # perf record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ] # perf script --show-task-events :4429 4429 27909.079372: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079375: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079376: 10 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079377: 223 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079378: 6571 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. usleep 4429 27909.079380: PERF_RECORD_COMM exec: usleep:4429/4429 usleep 4429 27909.079381: 185403 cycles: ffffffff810a72d3 flush_signal_handlers (/lib/modules/4. usleep 4429 27909.079444: 2241110 cycles: 7fc575355be3 _dl_start (/usr/lib64/ld-2.20.so) usleep 4429 27909.079875: PERF_RECORD_EXIT(4429:4429):(4429:4429) After: # perf record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ] # perf script --show-task perf 0 0.000000: PERF_RECORD_COMM: perf:8446/8446 perf 8446 30154.038944: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038948: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038949: 9 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038950: 230 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038951: 6772 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. usleep 8446 30154.038952: PERF_RECORD_COMM exec: usleep:8446/8446 usleep 8446 30154.038954: 196923 cycles: ffffffff81766440 _raw_spin_lock (/lib/modules/4.3.0-rc1 usleep 8446 30154.039021: 2292130 cycles: 7f609a173dc4 memcpy (/usr/lib64/ld-2.20.so) usleep 8446 30154.039349: PERF_RECORD_EXIT(8446:8446):(8446:8446) # Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1442881495-2928-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-22 08:24:55 +08:00
if (forks) {
struct machine *machine = &session->machines.host;
union perf_event *event;
perf record: Synthesize namespace events for current processes Synthesize PERF_RECORD_NAMESPACES events for processes that were running prior to invocation of perf record. The data for this is taken from /proc/$PID/ns. These changes make way for analyzing events with regard to namespaces. Committer notes: Check if 'tool' is NULL in perf_event__synthesize_namespaces(), as in the test__mmap_thread_lookup case, i.e. 'perf test Lookup mmap thread". Testing it: # ps axH > /tmp/allthreads # perf record -a --namespaces usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.169 MB perf.data (8 samples) ] # perf report -D | grep PERF_RECORD_NAMESPACES | wc -l 602 # wc -l /tmp/allthreads 601 /tmp/allthreads # tail /tmp/allthreads 16951 pts/4 T 0:00 git rebase -i a033bf1bfacdaa25642e6bcc857a7d0f67cc3c92^ 16952 pts/4 T 0:00 /bin/sh /usr/libexec/git-core/git-rebase -i a033bf1bfacdaa25642e6bcc857a7d0f67cc3c92^ 17176 pts/4 T 0:00 git commit --amend --no-post-rewrite 17204 pts/4 T 0:00 vim /home/acme/git/linux/.git/COMMIT_EDITMSG 18939 ? S 0:00 [kworker/2:1] 18947 ? S 0:00 [kworker/3:0] 18974 ? S 0:00 [kworker/1:0] 19047 ? S 0:00 [kworker/0:1] 19152 pts/6 S+ 0:00 weechat 19153 pts/7 R+ 0:00 ps axH # perf report -D | grep PERF_RECORD_NAMESPACES | tail 0 0 0x125068 [0xa0]: PERF_RECORD_NAMESPACES 17176/17176 - nr_namespaces: 7 0 0 0x1255b8 [0xa0]: PERF_RECORD_NAMESPACES 17204/17204 - nr_namespaces: 7 0 0 0x125df0 [0xa0]: PERF_RECORD_NAMESPACES 18939/18939 - nr_namespaces: 7 0 0 0x125f00 [0xa0]: PERF_RECORD_NAMESPACES 18947/18947 - nr_namespaces: 7 0 0 0x126010 [0xa0]: PERF_RECORD_NAMESPACES 18974/18974 - nr_namespaces: 7 0 0 0x126120 [0xa0]: PERF_RECORD_NAMESPACES 19047/19047 - nr_namespaces: 7 0 0 0x126230 [0xa0]: PERF_RECORD_NAMESPACES 19152/19152 - nr_namespaces: 7 0 0 0x129330 [0xa0]: PERF_RECORD_NAMESPACES 19154/19154 - nr_namespaces: 7 0 0 0x12a1f8 [0xa0]: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7 0 0 0x12b0b8 [0xa0]: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7 # Humm, investigate why we got two record for the 19155 pid/tid... Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891931111.25309.11073854609798681633.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 04:41:51 +08:00
pid_t tgid;
event = malloc(sizeof(event->comm) + machine->id_hdr_size);
if (event == NULL) {
err = -ENOMEM;
goto out_child;
}
perf record: Synthesize COMM event for a command line workload When perf creates a new child to profile, the events are enabled on exec(). And in this case, it doesn't synthesize any event for the child since they'll be generated during exec(). But there's an window between the enabling and the event generation. It used to be overcome since samples are only in kernel (so we always have the map) and the comm is overridden by a later COMM event. However it won't work if events are processed and displayed before the COMM event overrides like in 'perf script'. This leads to those early samples (like native_write_msr_safe) not having a comm but pid (like ':15328'). So it needs to synthesize COMM event for the child explicitly before enabling so that it can have a correct comm. But at this time, the comm will be "perf" since it's not exec-ed yet. Committer note: Before this patch: # perf record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ] # perf script --show-task-events :4429 4429 27909.079372: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079375: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079376: 10 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079377: 223 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079378: 6571 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. usleep 4429 27909.079380: PERF_RECORD_COMM exec: usleep:4429/4429 usleep 4429 27909.079381: 185403 cycles: ffffffff810a72d3 flush_signal_handlers (/lib/modules/4. usleep 4429 27909.079444: 2241110 cycles: 7fc575355be3 _dl_start (/usr/lib64/ld-2.20.so) usleep 4429 27909.079875: PERF_RECORD_EXIT(4429:4429):(4429:4429) After: # perf record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ] # perf script --show-task perf 0 0.000000: PERF_RECORD_COMM: perf:8446/8446 perf 8446 30154.038944: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038948: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038949: 9 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038950: 230 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038951: 6772 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. usleep 8446 30154.038952: PERF_RECORD_COMM exec: usleep:8446/8446 usleep 8446 30154.038954: 196923 cycles: ffffffff81766440 _raw_spin_lock (/lib/modules/4.3.0-rc1 usleep 8446 30154.039021: 2292130 cycles: 7f609a173dc4 memcpy (/usr/lib64/ld-2.20.so) usleep 8446 30154.039349: PERF_RECORD_EXIT(8446:8446):(8446:8446) # Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1442881495-2928-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-22 08:24:55 +08:00
/*
* Some H/W events are generated before COMM event
* which is emitted during exec(), so perf script
* cannot see a correct process name for those events.
* Synthesize COMM event to prevent it.
*/
perf record: Synthesize namespace events for current processes Synthesize PERF_RECORD_NAMESPACES events for processes that were running prior to invocation of perf record. The data for this is taken from /proc/$PID/ns. These changes make way for analyzing events with regard to namespaces. Committer notes: Check if 'tool' is NULL in perf_event__synthesize_namespaces(), as in the test__mmap_thread_lookup case, i.e. 'perf test Lookup mmap thread". Testing it: # ps axH > /tmp/allthreads # perf record -a --namespaces usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.169 MB perf.data (8 samples) ] # perf report -D | grep PERF_RECORD_NAMESPACES | wc -l 602 # wc -l /tmp/allthreads 601 /tmp/allthreads # tail /tmp/allthreads 16951 pts/4 T 0:00 git rebase -i a033bf1bfacdaa25642e6bcc857a7d0f67cc3c92^ 16952 pts/4 T 0:00 /bin/sh /usr/libexec/git-core/git-rebase -i a033bf1bfacdaa25642e6bcc857a7d0f67cc3c92^ 17176 pts/4 T 0:00 git commit --amend --no-post-rewrite 17204 pts/4 T 0:00 vim /home/acme/git/linux/.git/COMMIT_EDITMSG 18939 ? S 0:00 [kworker/2:1] 18947 ? S 0:00 [kworker/3:0] 18974 ? S 0:00 [kworker/1:0] 19047 ? S 0:00 [kworker/0:1] 19152 pts/6 S+ 0:00 weechat 19153 pts/7 R+ 0:00 ps axH # perf report -D | grep PERF_RECORD_NAMESPACES | tail 0 0 0x125068 [0xa0]: PERF_RECORD_NAMESPACES 17176/17176 - nr_namespaces: 7 0 0 0x1255b8 [0xa0]: PERF_RECORD_NAMESPACES 17204/17204 - nr_namespaces: 7 0 0 0x125df0 [0xa0]: PERF_RECORD_NAMESPACES 18939/18939 - nr_namespaces: 7 0 0 0x125f00 [0xa0]: PERF_RECORD_NAMESPACES 18947/18947 - nr_namespaces: 7 0 0 0x126010 [0xa0]: PERF_RECORD_NAMESPACES 18974/18974 - nr_namespaces: 7 0 0 0x126120 [0xa0]: PERF_RECORD_NAMESPACES 19047/19047 - nr_namespaces: 7 0 0 0x126230 [0xa0]: PERF_RECORD_NAMESPACES 19152/19152 - nr_namespaces: 7 0 0 0x129330 [0xa0]: PERF_RECORD_NAMESPACES 19154/19154 - nr_namespaces: 7 0 0 0x12a1f8 [0xa0]: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7 0 0 0x12b0b8 [0xa0]: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7 # Humm, investigate why we got two record for the 19155 pid/tid... Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891931111.25309.11073854609798681633.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 04:41:51 +08:00
tgid = perf_event__synthesize_comm(tool, event,
rec->evlist->workload.pid,
process_synthesized_event,
machine);
free(event);
if (tgid == -1)
goto out_child;
event = malloc(sizeof(event->namespaces) +
(NR_NAMESPACES * sizeof(struct perf_ns_link_info)) +
machine->id_hdr_size);
if (event == NULL) {
err = -ENOMEM;
goto out_child;
}
/*
* Synthesize NAMESPACES event for the command specified.
*/
perf_event__synthesize_namespaces(tool, event,
rec->evlist->workload.pid,
tgid, process_synthesized_event,
machine);
free(event);
perf record: Synthesize COMM event for a command line workload When perf creates a new child to profile, the events are enabled on exec(). And in this case, it doesn't synthesize any event for the child since they'll be generated during exec(). But there's an window between the enabling and the event generation. It used to be overcome since samples are only in kernel (so we always have the map) and the comm is overridden by a later COMM event. However it won't work if events are processed and displayed before the COMM event overrides like in 'perf script'. This leads to those early samples (like native_write_msr_safe) not having a comm but pid (like ':15328'). So it needs to synthesize COMM event for the child explicitly before enabling so that it can have a correct comm. But at this time, the comm will be "perf" since it's not exec-ed yet. Committer note: Before this patch: # perf record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ] # perf script --show-task-events :4429 4429 27909.079372: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079375: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079376: 10 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079377: 223 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079378: 6571 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. usleep 4429 27909.079380: PERF_RECORD_COMM exec: usleep:4429/4429 usleep 4429 27909.079381: 185403 cycles: ffffffff810a72d3 flush_signal_handlers (/lib/modules/4. usleep 4429 27909.079444: 2241110 cycles: 7fc575355be3 _dl_start (/usr/lib64/ld-2.20.so) usleep 4429 27909.079875: PERF_RECORD_EXIT(4429:4429):(4429:4429) After: # perf record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ] # perf script --show-task perf 0 0.000000: PERF_RECORD_COMM: perf:8446/8446 perf 8446 30154.038944: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038948: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038949: 9 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038950: 230 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038951: 6772 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. usleep 8446 30154.038952: PERF_RECORD_COMM exec: usleep:8446/8446 usleep 8446 30154.038954: 196923 cycles: ffffffff81766440 _raw_spin_lock (/lib/modules/4.3.0-rc1 usleep 8446 30154.039021: 2292130 cycles: 7f609a173dc4 memcpy (/usr/lib64/ld-2.20.so) usleep 8446 30154.039349: PERF_RECORD_EXIT(8446:8446):(8446:8446) # Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1442881495-2928-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-22 08:24:55 +08:00
perf_evlist__start_workload(rec->evlist);
perf record: Synthesize COMM event for a command line workload When perf creates a new child to profile, the events are enabled on exec(). And in this case, it doesn't synthesize any event for the child since they'll be generated during exec(). But there's an window between the enabling and the event generation. It used to be overcome since samples are only in kernel (so we always have the map) and the comm is overridden by a later COMM event. However it won't work if events are processed and displayed before the COMM event overrides like in 'perf script'. This leads to those early samples (like native_write_msr_safe) not having a comm but pid (like ':15328'). So it needs to synthesize COMM event for the child explicitly before enabling so that it can have a correct comm. But at this time, the comm will be "perf" since it's not exec-ed yet. Committer note: Before this patch: # perf record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ] # perf script --show-task-events :4429 4429 27909.079372: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079375: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079376: 10 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079377: 223 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. :4429 4429 27909.079378: 6571 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. usleep 4429 27909.079380: PERF_RECORD_COMM exec: usleep:4429/4429 usleep 4429 27909.079381: 185403 cycles: ffffffff810a72d3 flush_signal_handlers (/lib/modules/4. usleep 4429 27909.079444: 2241110 cycles: 7fc575355be3 _dl_start (/usr/lib64/ld-2.20.so) usleep 4429 27909.079875: PERF_RECORD_EXIT(4429:4429):(4429:4429) After: # perf record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ] # perf script --show-task perf 0 0.000000: PERF_RECORD_COMM: perf:8446/8446 perf 8446 30154.038944: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038948: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038949: 9 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038950: 230 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. perf 8446 30154.038951: 6772 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4. usleep 8446 30154.038952: PERF_RECORD_COMM exec: usleep:8446/8446 usleep 8446 30154.038954: 196923 cycles: ffffffff81766440 _raw_spin_lock (/lib/modules/4.3.0-rc1 usleep 8446 30154.039021: 2292130 cycles: 7f609a173dc4 memcpy (/usr/lib64/ld-2.20.so) usleep 8446 30154.039349: PERF_RECORD_EXIT(8446:8446):(8446:8446) # Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1442881495-2928-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-22 08:24:55 +08:00
}
if (opts->initial_delay) {
usleep(opts->initial_delay * USEC_PER_MSEC);
perf_evlist__enable(rec->evlist);
}
trigger_ready(&auxtrace_snapshot_trigger);
perf record: Split output into multiple files via '--switch-output' Allow 'perf record' to split its output into multiple files. For example: # ~/perf record -a --timestamp-filename --switch-output & [1] 10763 # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314468 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314762 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] #[ perf record: Dump perf.data.2015122622315171 ] # fg perf record -a --timestamp-filename --switch-output ^C[ perf record: Woken up 1 times to write data ] [ perf record: Dump perf.data.2015122622315513 ] [ perf record: Captured and wrote 0.014 MB perf.data.<timestamp> (296 samples) ] # ls -l total 920 -rw------- 1 root root 797692 Dec 26 22:31 perf.data.2015122622314468 -rw------- 1 root root 59960 Dec 26 22:31 perf.data.2015122622314762 -rw------- 1 root root 59912 Dec 26 22:31 perf.data.2015122622315171 -rw------- 1 root root 19220 Dec 26 22:31 perf.data.2015122622315513 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1461178794-40467-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Added man page entry, used the re-synthesize patch in this series as a fixup ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 02:59:50 +08:00
trigger_ready(&switch_output_trigger);
perf_hooks__invoke_record_start();
for (;;) {
unsigned long long hits = rec->samples;
/*
* rec->evlist->bkw_mmap_state is possible to be
* BKW_MMAP_EMPTY here: when done == true and
* hits != rec->samples in previous round.
*
* perf_evlist__toggle_bkw_mmap ensure we never
* convert BKW_MMAP_EMPTY to BKW_MMAP_DATA_PENDING.
*/
if (trigger_is_hit(&switch_output_trigger) || done || draining)
perf_evlist__toggle_bkw_mmap(rec->evlist, BKW_MMAP_DATA_PENDING);
if (record__mmap_read_all(rec) < 0) {
trigger_error(&auxtrace_snapshot_trigger);
perf record: Split output into multiple files via '--switch-output' Allow 'perf record' to split its output into multiple files. For example: # ~/perf record -a --timestamp-filename --switch-output & [1] 10763 # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314468 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314762 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] #[ perf record: Dump perf.data.2015122622315171 ] # fg perf record -a --timestamp-filename --switch-output ^C[ perf record: Woken up 1 times to write data ] [ perf record: Dump perf.data.2015122622315513 ] [ perf record: Captured and wrote 0.014 MB perf.data.<timestamp> (296 samples) ] # ls -l total 920 -rw------- 1 root root 797692 Dec 26 22:31 perf.data.2015122622314468 -rw------- 1 root root 59960 Dec 26 22:31 perf.data.2015122622314762 -rw------- 1 root root 59912 Dec 26 22:31 perf.data.2015122622315171 -rw------- 1 root root 19220 Dec 26 22:31 perf.data.2015122622315513 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1461178794-40467-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Added man page entry, used the re-synthesize patch in this series as a fixup ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 02:59:50 +08:00
trigger_error(&switch_output_trigger);
err = -1;
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
goto out_child;
}
if (auxtrace_record__snapshot_started) {
auxtrace_record__snapshot_started = 0;
if (!trigger_is_error(&auxtrace_snapshot_trigger))
record__read_auxtrace_snapshot(rec);
if (trigger_is_error(&auxtrace_snapshot_trigger)) {
pr_err("AUX area tracing snapshot failed\n");
err = -1;
goto out_child;
}
}
perf record: Split output into multiple files via '--switch-output' Allow 'perf record' to split its output into multiple files. For example: # ~/perf record -a --timestamp-filename --switch-output & [1] 10763 # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314468 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314762 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] #[ perf record: Dump perf.data.2015122622315171 ] # fg perf record -a --timestamp-filename --switch-output ^C[ perf record: Woken up 1 times to write data ] [ perf record: Dump perf.data.2015122622315513 ] [ perf record: Captured and wrote 0.014 MB perf.data.<timestamp> (296 samples) ] # ls -l total 920 -rw------- 1 root root 797692 Dec 26 22:31 perf.data.2015122622314468 -rw------- 1 root root 59960 Dec 26 22:31 perf.data.2015122622314762 -rw------- 1 root root 59912 Dec 26 22:31 perf.data.2015122622315171 -rw------- 1 root root 19220 Dec 26 22:31 perf.data.2015122622315513 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1461178794-40467-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Added man page entry, used the re-synthesize patch in this series as a fixup ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 02:59:50 +08:00
if (trigger_is_hit(&switch_output_trigger)) {
/*
* If switch_output_trigger is hit, the data in
* overwritable ring buffer should have been collected,
* so bkw_mmap_state should be set to BKW_MMAP_EMPTY.
*
* If SIGUSR2 raise after or during record__mmap_read_all(),
* record__mmap_read_all() didn't collect data from
* overwritable ring buffer. Read again.
*/
if (rec->evlist->bkw_mmap_state == BKW_MMAP_RUNNING)
continue;
perf record: Split output into multiple files via '--switch-output' Allow 'perf record' to split its output into multiple files. For example: # ~/perf record -a --timestamp-filename --switch-output & [1] 10763 # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314468 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314762 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] #[ perf record: Dump perf.data.2015122622315171 ] # fg perf record -a --timestamp-filename --switch-output ^C[ perf record: Woken up 1 times to write data ] [ perf record: Dump perf.data.2015122622315513 ] [ perf record: Captured and wrote 0.014 MB perf.data.<timestamp> (296 samples) ] # ls -l total 920 -rw------- 1 root root 797692 Dec 26 22:31 perf.data.2015122622314468 -rw------- 1 root root 59960 Dec 26 22:31 perf.data.2015122622314762 -rw------- 1 root root 59912 Dec 26 22:31 perf.data.2015122622315171 -rw------- 1 root root 19220 Dec 26 22:31 perf.data.2015122622315513 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1461178794-40467-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Added man page entry, used the re-synthesize patch in this series as a fixup ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 02:59:50 +08:00
trigger_ready(&switch_output_trigger);
/*
* Reenable events in overwrite ring buffer after
* record__mmap_read_all(): we should have collected
* data from it.
*/
perf_evlist__toggle_bkw_mmap(rec->evlist, BKW_MMAP_RUNNING);
perf record: Split output into multiple files via '--switch-output' Allow 'perf record' to split its output into multiple files. For example: # ~/perf record -a --timestamp-filename --switch-output & [1] 10763 # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314468 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314762 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] #[ perf record: Dump perf.data.2015122622315171 ] # fg perf record -a --timestamp-filename --switch-output ^C[ perf record: Woken up 1 times to write data ] [ perf record: Dump perf.data.2015122622315513 ] [ perf record: Captured and wrote 0.014 MB perf.data.<timestamp> (296 samples) ] # ls -l total 920 -rw------- 1 root root 797692 Dec 26 22:31 perf.data.2015122622314468 -rw------- 1 root root 59960 Dec 26 22:31 perf.data.2015122622314762 -rw------- 1 root root 59912 Dec 26 22:31 perf.data.2015122622315171 -rw------- 1 root root 19220 Dec 26 22:31 perf.data.2015122622315513 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1461178794-40467-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Added man page entry, used the re-synthesize patch in this series as a fixup ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 02:59:50 +08:00
if (!quiet)
fprintf(stderr, "[ perf record: dump data: Woken up %ld times ]\n",
waking);
waking = 0;
fd = record__switch_output(rec, false);
if (fd < 0) {
pr_err("Failed to switch to new file\n");
trigger_error(&switch_output_trigger);
err = fd;
goto out_child;
}
/* re-arm the alarm */
if (rec->switch_output.time)
alarm(rec->switch_output.time);
perf record: Split output into multiple files via '--switch-output' Allow 'perf record' to split its output into multiple files. For example: # ~/perf record -a --timestamp-filename --switch-output & [1] 10763 # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314468 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314762 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] #[ perf record: Dump perf.data.2015122622315171 ] # fg perf record -a --timestamp-filename --switch-output ^C[ perf record: Woken up 1 times to write data ] [ perf record: Dump perf.data.2015122622315513 ] [ perf record: Captured and wrote 0.014 MB perf.data.<timestamp> (296 samples) ] # ls -l total 920 -rw------- 1 root root 797692 Dec 26 22:31 perf.data.2015122622314468 -rw------- 1 root root 59960 Dec 26 22:31 perf.data.2015122622314762 -rw------- 1 root root 59912 Dec 26 22:31 perf.data.2015122622315171 -rw------- 1 root root 19220 Dec 26 22:31 perf.data.2015122622315513 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1461178794-40467-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Added man page entry, used the re-synthesize patch in this series as a fixup ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 02:59:50 +08:00
}
if (hits == rec->samples) {
if (done || draining)
break;
err = perf_evlist__poll(rec->evlist, -1);
/*
* Propagate error, only if there's any. Ignore positive
* number of returned events and interrupt error.
*/
if (err > 0 || (err < 0 && errno == EINTR))
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
err = 0;
waking++;
if (perf_evlist__filter_pollfd(rec->evlist, POLLERR | POLLHUP) == 0)
draining = true;
}
perf tools: Fix 'disabled' attribute config for record command Currently the record command sets all events initially as disabled. There's non conditional perf_evlist__enable call, that enables all events before we exec tracee program. That actually screws whole enable_on_exec logic, because the event is enabled before the traced program got executed. What we actually want is: 1) For any type of traced program: - all independent events and group leaders are disabled - all group members are enabled Group members are ruled by group leaders. They need to be enabled, because the group scheduling relies on that. 2) For traced programs executed by perf: - all independent events and group leaders have enable_on_exec set - we don't specifically enable or disable any event during the record command Independent events and group leaders are initially disabled and get enabled by exec. Group members are ruled by group leaders as stated in 1). 3) For traced programs attached by perf (pid/tid): - we specifically enable or disable all events during the record command When attaching events to already running traced we enable/disable events specifically, as there's no initial traced exec call. Fixing appropriate perf_event_attr test case to cover this change. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1352741644-16809-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-11-13 01:34:01 +08:00
/*
* When perf is starting the traced process, at the end events
* die with the process and we wait for that. Thus no need to
* disable events in this case.
*/
if (done && !disabled && !target__none(&opts->target)) {
trigger_off(&auxtrace_snapshot_trigger);
perf_evlist__disable(rec->evlist);
disabled = true;
}
}
trigger_off(&auxtrace_snapshot_trigger);
perf record: Split output into multiple files via '--switch-output' Allow 'perf record' to split its output into multiple files. For example: # ~/perf record -a --timestamp-filename --switch-output & [1] 10763 # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314468 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314762 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] #[ perf record: Dump perf.data.2015122622315171 ] # fg perf record -a --timestamp-filename --switch-output ^C[ perf record: Woken up 1 times to write data ] [ perf record: Dump perf.data.2015122622315513 ] [ perf record: Captured and wrote 0.014 MB perf.data.<timestamp> (296 samples) ] # ls -l total 920 -rw------- 1 root root 797692 Dec 26 22:31 perf.data.2015122622314468 -rw------- 1 root root 59960 Dec 26 22:31 perf.data.2015122622314762 -rw------- 1 root root 59912 Dec 26 22:31 perf.data.2015122622315171 -rw------- 1 root root 19220 Dec 26 22:31 perf.data.2015122622315513 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1461178794-40467-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Added man page entry, used the re-synthesize patch in this series as a fixup ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 02:59:50 +08:00
trigger_off(&switch_output_trigger);
if (forks && workload_exec_errno) {
char msg[STRERR_BUFSIZE];
const char *emsg = str_error_r(workload_exec_errno, msg, sizeof(msg));
pr_err("Workload failed: %s\n", emsg);
err = -1;
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
goto out_child;
}
perf record: Show precise number of samples After perf record finishes, it prints file size and number of samples in the file but this info is wrong since it assumes typical sample size of 24 bytes and divides file size by the value. However as we post-process recorded samples for build-id, it can show correct number like below. If build-id post-processing is not requested just omit the wrong number of samples. $ perf record noploop 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.159 MB perf.data (3989 samples) ] $ perf report --stdio -n # To display the perf.data header info, please use --header/--header-only options. # # Samples: 3K of event 'cycles' # Event count (approx.): 3771330663 # # Overhead Samples Command Shared Object Symbol # ........ ............ ....... ................ .......................... # 99.90% 3982 noploop noploop [.] main 0.09% 1 noploop ld-2.17.so [.] _dl_check_map_versions 0.01% 1 noploop [kernel.vmlinux] [k] setup_arg_pages 0.00% 5 noploop [kernel.vmlinux] [k] intel_pmu_enable_all Reported-by: Milian Wolff <mail@milianw.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1422518843-25818-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-29 16:06:44 +08:00
if (!quiet)
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
fprintf(stderr, "[ perf record: Woken up %ld times to write data ]\n", waking);
perf record: Add --tail-synthesize option When working with overwritable ring buffer there's a inconvenience problem: if perf dumps data after a long period after it starts, non-sample events may lost, which makes following 'perf report' unable to identify proc name and mmap layout. For example: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output \ dd if=/dev/zero of=/dev/null send SIGUSR2 after dd runs long enough. The resuling perf.data lost correct comm and mmap events: # perf script -i perf.data.2016061522374354 perf 24478 [004] 2581325.601789: raw_syscalls:sys_exit: NR 0 = 512 ^^^^ Should be 'dd' 27b2e8 syscall_slow_exit_work+0xfe2000e3 (/lib/modules/4.6.0-rc3+/build/vmlinux) 203cc7 do_syscall_64+0xfe200117 (/lib/modules/4.6.0-rc3+/build/vmlinux) b18d83 return_from_SYSCALL_64+0xfe200000 (/lib/modules/4.6.0-rc3+/build/vmlinux) 7f47c417edf0 [unknown] ([unknown]) ^^^^^^^^^^^^ Fail to unwind This patch provides a '--tail-synthesize' option, allows perf to collect system status when finalizing output file. In resuling output file, the non-sample events reflect system status when dumping data. After this patch: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output --tail-synthesize \ dd if=/dev/zero of=/dev/null # perf script -i perf.data.2016061600544998 dd 27364 [004] 2583244.994464: raw_syscalls:sys_enter: NR 1 (1, ... ^^ Correct comm 203a18 syscall_trace_enter_phase2+0xfe2001a8 ([kernel.kallsyms]) 203aa5 syscall_trace_enter+0xfe200055 ([kernel.kallsyms]) 203caa do_syscall_64+0xfe2000fa ([kernel.kallsyms]) b18d83 return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms]) d8e50 __GI___libc_write+0xffff01d9639f4010 (/tmp/oxygen_root-w00229757/lib64/libc-2.18.so) ^^^^^ Correct unwind This option doesn't aim to solve this problem completely. If a process terminates before SIGUSR2, we still lost its COMM and MMAP events. For example, we can't unwind correctly from the final perf.data we get from the previous example, because when perf collects the final output file (when we press C-c), 'dd' has been terminated so its '/proc/<pid>/mmap' becomes empty. However, this is a cheaper choice. To completely solve this problem we need to continously output non-sample events. To satisify the requirement of daemonization, we need to merge them periodically. It is possible but requires much more code and cycles. Automatically select --tail-synthesize when --overwrite is provided. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-16-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:47 +08:00
if (target__none(&rec->opts.target))
record__synthesize_workload(rec, true);
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
out_child:
record__aio_mmap_read_sync(rec);
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
if (forks) {
int exit_status;
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
if (!child_finished)
kill(rec->evlist->workload.pid, SIGTERM);
wait(&exit_status);
if (err < 0)
status = err;
else if (WIFEXITED(exit_status))
status = WEXITSTATUS(exit_status);
else if (WIFSIGNALED(exit_status))
signr = WTERMSIG(exit_status);
} else
status = err;
perf record: Add --tail-synthesize option When working with overwritable ring buffer there's a inconvenience problem: if perf dumps data after a long period after it starts, non-sample events may lost, which makes following 'perf report' unable to identify proc name and mmap layout. For example: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output \ dd if=/dev/zero of=/dev/null send SIGUSR2 after dd runs long enough. The resuling perf.data lost correct comm and mmap events: # perf script -i perf.data.2016061522374354 perf 24478 [004] 2581325.601789: raw_syscalls:sys_exit: NR 0 = 512 ^^^^ Should be 'dd' 27b2e8 syscall_slow_exit_work+0xfe2000e3 (/lib/modules/4.6.0-rc3+/build/vmlinux) 203cc7 do_syscall_64+0xfe200117 (/lib/modules/4.6.0-rc3+/build/vmlinux) b18d83 return_from_SYSCALL_64+0xfe200000 (/lib/modules/4.6.0-rc3+/build/vmlinux) 7f47c417edf0 [unknown] ([unknown]) ^^^^^^^^^^^^ Fail to unwind This patch provides a '--tail-synthesize' option, allows perf to collect system status when finalizing output file. In resuling output file, the non-sample events reflect system status when dumping data. After this patch: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output --tail-synthesize \ dd if=/dev/zero of=/dev/null # perf script -i perf.data.2016061600544998 dd 27364 [004] 2583244.994464: raw_syscalls:sys_enter: NR 1 (1, ... ^^ Correct comm 203a18 syscall_trace_enter_phase2+0xfe2001a8 ([kernel.kallsyms]) 203aa5 syscall_trace_enter+0xfe200055 ([kernel.kallsyms]) 203caa do_syscall_64+0xfe2000fa ([kernel.kallsyms]) b18d83 return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms]) d8e50 __GI___libc_write+0xffff01d9639f4010 (/tmp/oxygen_root-w00229757/lib64/libc-2.18.so) ^^^^^ Correct unwind This option doesn't aim to solve this problem completely. If a process terminates before SIGUSR2, we still lost its COMM and MMAP events. For example, we can't unwind correctly from the final perf.data we get from the previous example, because when perf collects the final output file (when we press C-c), 'dd' has been terminated so its '/proc/<pid>/mmap' becomes empty. However, this is a cheaper choice. To completely solve this problem we need to continously output non-sample events. To satisify the requirement of daemonization, we need to merge them periodically. It is possible but requires much more code and cycles. Automatically select --tail-synthesize when --overwrite is provided. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-16-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:47 +08:00
record__synthesize(rec, true);
perf record: Show precise number of samples After perf record finishes, it prints file size and number of samples in the file but this info is wrong since it assumes typical sample size of 24 bytes and divides file size by the value. However as we post-process recorded samples for build-id, it can show correct number like below. If build-id post-processing is not requested just omit the wrong number of samples. $ perf record noploop 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.159 MB perf.data (3989 samples) ] $ perf report --stdio -n # To display the perf.data header info, please use --header/--header-only options. # # Samples: 3K of event 'cycles' # Event count (approx.): 3771330663 # # Overhead Samples Command Shared Object Symbol # ........ ............ ....... ................ .......................... # 99.90% 3982 noploop noploop [.] main 0.09% 1 noploop ld-2.17.so [.] _dl_check_map_versions 0.01% 1 noploop [kernel.vmlinux] [k] setup_arg_pages 0.00% 5 noploop [kernel.vmlinux] [k] intel_pmu_enable_all Reported-by: Milian Wolff <mail@milianw.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1422518843-25818-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-29 16:06:44 +08:00
/* this will be recalculated during process_buildids() */
rec->samples = 0;
if (!err) {
if (!rec->timestamp_filename) {
record__finish_output(rec);
} else {
fd = record__switch_output(rec, true);
if (fd < 0) {
status = fd;
goto out_delete_session;
}
}
}
perf_hooks__invoke_record_end();
perf record: Show precise number of samples After perf record finishes, it prints file size and number of samples in the file but this info is wrong since it assumes typical sample size of 24 bytes and divides file size by the value. However as we post-process recorded samples for build-id, it can show correct number like below. If build-id post-processing is not requested just omit the wrong number of samples. $ perf record noploop 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.159 MB perf.data (3989 samples) ] $ perf report --stdio -n # To display the perf.data header info, please use --header/--header-only options. # # Samples: 3K of event 'cycles' # Event count (approx.): 3771330663 # # Overhead Samples Command Shared Object Symbol # ........ ............ ....... ................ .......................... # 99.90% 3982 noploop noploop [.] main 0.09% 1 noploop ld-2.17.so [.] _dl_check_map_versions 0.01% 1 noploop [kernel.vmlinux] [k] setup_arg_pages 0.00% 5 noploop [kernel.vmlinux] [k] intel_pmu_enable_all Reported-by: Milian Wolff <mail@milianw.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1422518843-25818-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-29 16:06:44 +08:00
if (!err && !quiet) {
char samples[128];
const char *postfix = rec->timestamp_filename ?
".<timestamp>" : "";
perf record: Show precise number of samples After perf record finishes, it prints file size and number of samples in the file but this info is wrong since it assumes typical sample size of 24 bytes and divides file size by the value. However as we post-process recorded samples for build-id, it can show correct number like below. If build-id post-processing is not requested just omit the wrong number of samples. $ perf record noploop 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.159 MB perf.data (3989 samples) ] $ perf report --stdio -n # To display the perf.data header info, please use --header/--header-only options. # # Samples: 3K of event 'cycles' # Event count (approx.): 3771330663 # # Overhead Samples Command Shared Object Symbol # ........ ............ ....... ................ .......................... # 99.90% 3982 noploop noploop [.] main 0.09% 1 noploop ld-2.17.so [.] _dl_check_map_versions 0.01% 1 noploop [kernel.vmlinux] [k] setup_arg_pages 0.00% 5 noploop [kernel.vmlinux] [k] intel_pmu_enable_all Reported-by: Milian Wolff <mail@milianw.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1422518843-25818-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-29 16:06:44 +08:00
if (rec->samples && !rec->opts.full_auxtrace)
perf record: Show precise number of samples After perf record finishes, it prints file size and number of samples in the file but this info is wrong since it assumes typical sample size of 24 bytes and divides file size by the value. However as we post-process recorded samples for build-id, it can show correct number like below. If build-id post-processing is not requested just omit the wrong number of samples. $ perf record noploop 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.159 MB perf.data (3989 samples) ] $ perf report --stdio -n # To display the perf.data header info, please use --header/--header-only options. # # Samples: 3K of event 'cycles' # Event count (approx.): 3771330663 # # Overhead Samples Command Shared Object Symbol # ........ ............ ....... ................ .......................... # 99.90% 3982 noploop noploop [.] main 0.09% 1 noploop ld-2.17.so [.] _dl_check_map_versions 0.01% 1 noploop [kernel.vmlinux] [k] setup_arg_pages 0.00% 5 noploop [kernel.vmlinux] [k] intel_pmu_enable_all Reported-by: Milian Wolff <mail@milianw.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1422518843-25818-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-29 16:06:44 +08:00
scnprintf(samples, sizeof(samples),
" (%" PRIu64 " samples)", rec->samples);
else
samples[0] = '\0';
fprintf(stderr, "[ perf record: Captured and wrote %.3f MB %s%s%s ]\n",
perf_data__size(data) / 1024.0 / 1024.0,
data->path, postfix, samples);
perf record: Show precise number of samples After perf record finishes, it prints file size and number of samples in the file but this info is wrong since it assumes typical sample size of 24 bytes and divides file size by the value. However as we post-process recorded samples for build-id, it can show correct number like below. If build-id post-processing is not requested just omit the wrong number of samples. $ perf record noploop 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.159 MB perf.data (3989 samples) ] $ perf report --stdio -n # To display the perf.data header info, please use --header/--header-only options. # # Samples: 3K of event 'cycles' # Event count (approx.): 3771330663 # # Overhead Samples Command Shared Object Symbol # ........ ............ ....... ................ .......................... # 99.90% 3982 noploop noploop [.] main 0.09% 1 noploop ld-2.17.so [.] _dl_check_map_versions 0.01% 1 noploop [kernel.vmlinux] [k] setup_arg_pages 0.00% 5 noploop [kernel.vmlinux] [k] intel_pmu_enable_all Reported-by: Milian Wolff <mail@milianw.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1422518843-25818-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-29 16:06:44 +08:00
}
out_delete_session:
perf_session__delete(session);
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
return status;
}
static void callchain_debug(struct callchain_param *callchain)
{
perf tools: Enable LBR call stack support Currently, there are two call chain recording options, fp and dwarf. Haswell has a new feature that utilizes the existing LBR facility to record call chains. Kernel side LBR support code provides this as a third option to record call chains. This patch enables the lbr call stack support on the tooling side. LBR call stack has some limitations: - It reuses current LBR facility, so LBR call stack and branch record can not be enabled at the same time. - It is only available for user-space callchains. However, it also offers some advantages: - LBR call stack can work on user apps which don't have frame-pointers or dwarf debug info compiled. It is a good alternative when nothing else works. Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Jacob Shin <jacob.w.shin@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Rodrigo Campos <rodrigo@sdfg.com.ar> Cc: Stephane Eranian <eranian@google.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1420482185-29830-2-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-06 02:23:04 +08:00
static const char *str[CALLCHAIN_MAX] = { "NONE", "FP", "DWARF", "LBR" };
pr_debug("callchain: type %s\n", str[callchain->record_mode]);
perf tools: Support for DWARF mode callchain This patch enables perf to use the DWARF unwind code. It extends the perf record '-g' option with following arguments: 'fp' - provides framepointer based user stack backtrace 'dwarf[,size]' - provides DWARF (libunwind) based user stack backtrace. The size specifies the size of the user stack dump. If omitted it is 8192 by default. If libunwind is found during the perf build, then the 'dwarf' argument becomes available for record command. The 'fp' stays as default option in any case. Examples: (perf compiled with libunwind) perf record -g dwarf ls - provides dwarf unwind with 8192 as stack dump size perf record -g dwarf,4096 ls - provides dwarf unwind with 4096 as stack dump size perf record -g -- ls perf record -g fp ls - provides frame pointer unwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1344345647-11536-13-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 21:20:47 +08:00
if (callchain->record_mode == CALLCHAIN_DWARF)
pr_debug("callchain: stack dump size %d\n",
callchain->dump_size);
}
int record_opts__parse_callchain(struct record_opts *record,
struct callchain_param *callchain,
const char *arg, bool unset)
{
int ret;
callchain->enabled = !unset;
/* --no-call-graph */
if (unset) {
callchain->record_mode = CALLCHAIN_NONE;
pr_debug("callchain: disabled\n");
return 0;
}
ret = parse_callchain_record_opt(arg, callchain);
if (!ret) {
/* Enable data address sampling for DWARF unwind. */
if (callchain->record_mode == CALLCHAIN_DWARF)
record->sample_address = true;
callchain_debug(callchain);
}
perf tools: Support for DWARF mode callchain This patch enables perf to use the DWARF unwind code. It extends the perf record '-g' option with following arguments: 'fp' - provides framepointer based user stack backtrace 'dwarf[,size]' - provides DWARF (libunwind) based user stack backtrace. The size specifies the size of the user stack dump. If omitted it is 8192 by default. If libunwind is found during the perf build, then the 'dwarf' argument becomes available for record command. The 'fp' stays as default option in any case. Examples: (perf compiled with libunwind) perf record -g dwarf ls - provides dwarf unwind with 8192 as stack dump size perf record -g dwarf,4096 ls - provides dwarf unwind with 4096 as stack dump size perf record -g -- ls perf record -g fp ls - provides frame pointer unwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1344345647-11536-13-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 21:20:47 +08:00
return ret;
}
int record_parse_callchain_opt(const struct option *opt,
const char *arg,
int unset)
{
return record_opts__parse_callchain(opt->value, &callchain_param, arg, unset);
}
int record_callchain_opt(const struct option *opt,
const char *arg __maybe_unused,
int unset __maybe_unused)
{
struct callchain_param *callchain = opt->value;
callchain->enabled = true;
if (callchain->record_mode == CALLCHAIN_NONE)
callchain->record_mode = CALLCHAIN_FP;
callchain_debug(callchain);
return 0;
}
static int perf_record_config(const char *var, const char *value, void *cb)
{
struct record *rec = cb;
if (!strcmp(var, "record.build-id")) {
if (!strcmp(value, "cache"))
rec->no_buildid_cache = false;
else if (!strcmp(value, "no-cache"))
rec->no_buildid_cache = true;
else if (!strcmp(value, "skip"))
rec->no_buildid = true;
else
return -1;
return 0;
}
if (!strcmp(var, "record.call-graph")) {
var = "call-graph.record-mode";
return perf_default_config(var, value, cb);
}
#ifdef HAVE_AIO_SUPPORT
if (!strcmp(var, "record.aio")) {
rec->opts.nr_cblocks = strtol(value, NULL, 0);
if (!rec->opts.nr_cblocks)
rec->opts.nr_cblocks = nr_cblocks_default;
}
#endif
return 0;
}
struct clockid_map {
const char *name;
int clockid;
};
#define CLOCKID_MAP(n, c) \
{ .name = n, .clockid = (c), }
#define CLOCKID_END { .name = NULL, }
/*
* Add the missing ones, we need to build on many distros...
*/
#ifndef CLOCK_MONOTONIC_RAW
#define CLOCK_MONOTONIC_RAW 4
#endif
#ifndef CLOCK_BOOTTIME
#define CLOCK_BOOTTIME 7
#endif
#ifndef CLOCK_TAI
#define CLOCK_TAI 11
#endif
static const struct clockid_map clockids[] = {
/* available for all events, NMI safe */
CLOCKID_MAP("monotonic", CLOCK_MONOTONIC),
CLOCKID_MAP("monotonic_raw", CLOCK_MONOTONIC_RAW),
/* available for some events */
CLOCKID_MAP("realtime", CLOCK_REALTIME),
CLOCKID_MAP("boottime", CLOCK_BOOTTIME),
CLOCKID_MAP("tai", CLOCK_TAI),
/* available for the lazy */
CLOCKID_MAP("mono", CLOCK_MONOTONIC),
CLOCKID_MAP("raw", CLOCK_MONOTONIC_RAW),
CLOCKID_MAP("real", CLOCK_REALTIME),
CLOCKID_MAP("boot", CLOCK_BOOTTIME),
CLOCKID_END,
};
static int get_clockid_res(clockid_t clk_id, u64 *res_ns)
{
struct timespec res;
*res_ns = 0;
if (!clock_getres(clk_id, &res))
*res_ns = res.tv_nsec + res.tv_sec * NSEC_PER_SEC;
else
pr_warning("WARNING: Failed to determine specified clock resolution.\n");
return 0;
}
static int parse_clockid(const struct option *opt, const char *str, int unset)
{
struct record_opts *opts = (struct record_opts *)opt->value;
const struct clockid_map *cm;
const char *ostr = str;
if (unset) {
opts->use_clockid = 0;
return 0;
}
/* no arg passed */
if (!str)
return 0;
/* no setting it twice */
if (opts->use_clockid)
return -1;
opts->use_clockid = true;
/* if its a number, we're done */
if (sscanf(str, "%d", &opts->clockid) == 1)
return get_clockid_res(opts->clockid, &opts->clockid_res_ns);
/* allow a "CLOCK_" prefix to the name */
if (!strncasecmp(str, "CLOCK_", 6))
str += 6;
for (cm = clockids; cm->name; cm++) {
if (!strcasecmp(str, cm->name)) {
opts->clockid = cm->clockid;
return get_clockid_res(opts->clockid,
&opts->clockid_res_ns);
}
}
opts->use_clockid = false;
ui__warning("unknown clockid %s, check man page\n", ostr);
return -1;
}
static int record__parse_affinity(const struct option *opt, const char *str, int unset)
{
struct record_opts *opts = (struct record_opts *)opt->value;
if (unset || !str)
return 0;
if (!strcasecmp(str, "node"))
opts->affinity = PERF_AFFINITY_NODE;
else if (!strcasecmp(str, "cpu"))
opts->affinity = PERF_AFFINITY_CPU;
return 0;
}
static int record__parse_mmap_pages(const struct option *opt,
const char *str,
int unset __maybe_unused)
{
struct record_opts *opts = opt->value;
char *s, *p;
unsigned int mmap_pages;
int ret;
if (!str)
return -EINVAL;
s = strdup(str);
if (!s)
return -ENOMEM;
p = strchr(s, ',');
if (p)
*p = '\0';
if (*s) {
ret = __perf_evlist__parse_mmap_pages(&mmap_pages, s);
if (ret)
goto out_free;
opts->mmap_pages = mmap_pages;
}
if (!p) {
ret = 0;
goto out_free;
}
ret = __perf_evlist__parse_mmap_pages(&mmap_pages, p + 1);
if (ret)
goto out_free;
opts->auxtrace_mmap_pages = mmap_pages;
out_free:
free(s);
return ret;
}
static void switch_output_size_warn(struct record *rec)
{
u64 wakeup_size = perf_evlist__mmap_size(rec->opts.mmap_pages);
struct switch_output *s = &rec->switch_output;
wakeup_size /= 2;
if (s->size < wakeup_size) {
char buf[100];
unit_number__scnprintf(buf, sizeof(buf), wakeup_size);
pr_warning("WARNING: switch-output data size lower than "
"wakeup kernel buffer size (%s) "
"expect bigger perf.data sizes\n", buf);
}
}
static int switch_output_setup(struct record *rec)
{
struct switch_output *s = &rec->switch_output;
static struct parse_tag tags_size[] = {
{ .tag = 'B', .mult = 1 },
{ .tag = 'K', .mult = 1 << 10 },
{ .tag = 'M', .mult = 1 << 20 },
{ .tag = 'G', .mult = 1 << 30 },
{ .tag = 0 },
};
static struct parse_tag tags_time[] = {
{ .tag = 's', .mult = 1 },
{ .tag = 'm', .mult = 60 },
{ .tag = 'h', .mult = 60*60 },
{ .tag = 'd', .mult = 60*60*24 },
{ .tag = 0 },
};
unsigned long val;
if (!s->set)
return 0;
if (!strcmp(s->str, "signal")) {
s->signal = true;
pr_debug("switch-output with SIGUSR2 signal\n");
goto enabled;
}
val = parse_tag_value(s->str, tags_size);
if (val != (unsigned long) -1) {
s->size = val;
pr_debug("switch-output with %s size threshold\n", s->str);
goto enabled;
}
val = parse_tag_value(s->str, tags_time);
if (val != (unsigned long) -1) {
s->time = val;
pr_debug("switch-output with %s time threshold (%lu seconds)\n",
s->str, s->time);
goto enabled;
}
return -1;
enabled:
rec->timestamp_filename = true;
s->enabled = true;
if (s->size && !rec->opts.no_buffering)
switch_output_size_warn(rec);
return 0;
}
static const char * const __record_usage[] = {
"perf record [<options>] [<command>]",
"perf record [<options>] -- <command> [<options>]",
NULL
};
const char * const *record_usage = __record_usage;
/*
* XXX Ideally would be local to cmd_record() and passed to a record__new
* because we need to have access to it in record__exit, that is called
* after cmd_record() exits, but since record_options need to be accessible to
* builtin-script, leave it here.
*
* At least we don't ouch it in all the other functions here directly.
*
* Just say no to tons of global variables, sigh.
*/
static struct record record = {
.opts = {
.sample_time = true,
.mmap_pages = UINT_MAX,
.user_freq = UINT_MAX,
.user_interval = ULLONG_MAX,
.freq = 4000,
.target = {
.uses_mmap = true,
.default_per_cpu = true,
},
},
perf record: Show precise number of samples After perf record finishes, it prints file size and number of samples in the file but this info is wrong since it assumes typical sample size of 24 bytes and divides file size by the value. However as we post-process recorded samples for build-id, it can show correct number like below. If build-id post-processing is not requested just omit the wrong number of samples. $ perf record noploop 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.159 MB perf.data (3989 samples) ] $ perf report --stdio -n # To display the perf.data header info, please use --header/--header-only options. # # Samples: 3K of event 'cycles' # Event count (approx.): 3771330663 # # Overhead Samples Command Shared Object Symbol # ........ ............ ....... ................ .......................... # 99.90% 3982 noploop noploop [.] main 0.09% 1 noploop ld-2.17.so [.] _dl_check_map_versions 0.01% 1 noploop [kernel.vmlinux] [k] setup_arg_pages 0.00% 5 noploop [kernel.vmlinux] [k] intel_pmu_enable_all Reported-by: Milian Wolff <mail@milianw.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1422518843-25818-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-29 16:06:44 +08:00
.tool = {
.sample = process_sample_event,
.fork = perf_event__process_fork,
.exit = perf_event__process_exit,
perf record: Show precise number of samples After perf record finishes, it prints file size and number of samples in the file but this info is wrong since it assumes typical sample size of 24 bytes and divides file size by the value. However as we post-process recorded samples for build-id, it can show correct number like below. If build-id post-processing is not requested just omit the wrong number of samples. $ perf record noploop 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.159 MB perf.data (3989 samples) ] $ perf report --stdio -n # To display the perf.data header info, please use --header/--header-only options. # # Samples: 3K of event 'cycles' # Event count (approx.): 3771330663 # # Overhead Samples Command Shared Object Symbol # ........ ............ ....... ................ .......................... # 99.90% 3982 noploop noploop [.] main 0.09% 1 noploop ld-2.17.so [.] _dl_check_map_versions 0.01% 1 noploop [kernel.vmlinux] [k] setup_arg_pages 0.00% 5 noploop [kernel.vmlinux] [k] intel_pmu_enable_all Reported-by: Milian Wolff <mail@milianw.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1422518843-25818-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-29 16:06:44 +08:00
.comm = perf_event__process_comm,
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 04:41:43 +08:00
.namespaces = perf_event__process_namespaces,
perf record: Show precise number of samples After perf record finishes, it prints file size and number of samples in the file but this info is wrong since it assumes typical sample size of 24 bytes and divides file size by the value. However as we post-process recorded samples for build-id, it can show correct number like below. If build-id post-processing is not requested just omit the wrong number of samples. $ perf record noploop 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.159 MB perf.data (3989 samples) ] $ perf report --stdio -n # To display the perf.data header info, please use --header/--header-only options. # # Samples: 3K of event 'cycles' # Event count (approx.): 3771330663 # # Overhead Samples Command Shared Object Symbol # ........ ............ ....... ................ .......................... # 99.90% 3982 noploop noploop [.] main 0.09% 1 noploop ld-2.17.so [.] _dl_check_map_versions 0.01% 1 noploop [kernel.vmlinux] [k] setup_arg_pages 0.00% 5 noploop [kernel.vmlinux] [k] intel_pmu_enable_all Reported-by: Milian Wolff <mail@milianw.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1422518843-25818-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-29 16:06:44 +08:00
.mmap = perf_event__process_mmap,
.mmap2 = perf_event__process_mmap2,
.ordered_events = true,
perf record: Show precise number of samples After perf record finishes, it prints file size and number of samples in the file but this info is wrong since it assumes typical sample size of 24 bytes and divides file size by the value. However as we post-process recorded samples for build-id, it can show correct number like below. If build-id post-processing is not requested just omit the wrong number of samples. $ perf record noploop 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.159 MB perf.data (3989 samples) ] $ perf report --stdio -n # To display the perf.data header info, please use --header/--header-only options. # # Samples: 3K of event 'cycles' # Event count (approx.): 3771330663 # # Overhead Samples Command Shared Object Symbol # ........ ............ ....... ................ .......................... # 99.90% 3982 noploop noploop [.] main 0.09% 1 noploop ld-2.17.so [.] _dl_check_map_versions 0.01% 1 noploop [kernel.vmlinux] [k] setup_arg_pages 0.00% 5 noploop [kernel.vmlinux] [k] intel_pmu_enable_all Reported-by: Milian Wolff <mail@milianw.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1422518843-25818-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-29 16:06:44 +08:00
},
};
perf tools: Improve call graph documents and help messages The --call-graph option is complex so we should provide better guide for users. Also change help message to be consistent with config option names. Now perf top will show help like below: $ perf top --call-graph Error: option `call-graph' requires a value Usage: perf top [<options>] --call-graph <record_mode[,record_size],print_type,threshold[,print_limit],order,sort_key[,branch]> setup and enables call-graph (stack chain/backtrace): record_mode: call graph recording mode (fp|dwarf|lbr) record_size: if record_mode is 'dwarf', max size of stack recording (<bytes>) default: 8192 (bytes) print_type: call graph printing style (graph|flat|fractal|none) threshold: minimum call graph inclusion threshold (<percent>) print_limit: maximum number of call graph entry (<number>) order: call graph order (caller|callee) sort_key: call graph sort key (function|address) branch: include last branch info to call graph (branch) Default: fp,graph,0.5,caller,function Requested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Chandler Carruth <chandlerc@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1445524112-5201-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-22 22:28:32 +08:00
const char record_callchain_help[] = CALLCHAIN_RECORD_HELP
"\n\t\t\t\tDefault: fp";
static bool dry_run;
/*
* XXX Will stay a global variable till we fix builtin-script.c to stop messing
* with it and switch to use the library functions in perf_evlist that came
* from builtin-record.c, i.e. use record_opts,
* perf_evlist__prepare_workload, etc instead of fork+exec'in 'perf record',
* using pipes, etc.
*/
static struct option __record_options[] = {
OPT_CALLBACK('e', "event", &record.evlist, "event",
"event selector. use 'perf list' to list available events",
parse_events_option),
OPT_CALLBACK(0, "filter", &record.evlist, "filter",
"event filter", parse_filter),
perf record: Allow filtering perf's pid via --exclude-perf This patch allows 'perf record' to exclude events issued by perf itself by '--exclude-perf' option. Before this patch, when doing something like: # perf record -a -e syscalls:sys_enter_write <cmd> One could easily get result like this: # /tmp/perf report --stdio ... # Overhead Command Shared Object Symbol # ........ ....... .................. .................... # 99.99% perf libpthread-2.18.so [.] __write_nocancel 0.01% ls libc-2.18.so [.] write 0.01% sshd libc-2.18.so [.] write ... Where most events are generated by perf itself. A shell trick can be done to filter perf itself out: # cat << EOF > ./tmp > #!/bin/sh > exec perf record -e ... --filter="common_pid != \$\$" -a sleep 10 > EOF # chmod a+x ./tmp # ./tmp However, doing so is user unfriendly. This patch extracts evsel iteration framework introduced by patch 'perf record: Apply filter to all events in a glob matching' into foreach_evsel_in_last_glob(), and makes exclude_perf() function append new filter expression to each evsel selected by a '-e' selector. To avoid losing filters if user pass '--filter' after '--exclude-perf', this patch uses perf_evsel__append_filter() in both case, instead of perf_evsel__set_filter() which removes old filter. As a side effect, now it is possible to use multiple '--filter' option for one selector. They are combinded with '&&'. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1436513770-8896-2-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-10 15:36:10 +08:00
OPT_CALLBACK_NOOPT(0, "exclude-perf", &record.evlist,
NULL, "don't record events from perf itself",
exclude_perf),
OPT_STRING('p', "pid", &record.opts.target.pid, "pid",
"record events on existing process id"),
OPT_STRING('t', "tid", &record.opts.target.tid, "tid",
"record events on existing thread id"),
OPT_INTEGER('r', "realtime", &record.realtime_prio,
"collect data with this RT SCHED_FIFO priority"),
OPT_BOOLEAN(0, "no-buffering", &record.opts.no_buffering,
perf record: Add "nodelay" mode, disabled by default Sometimes there is a need to use perf in "live-log" mode. The problem is, for seldom events, actual info output is largely delayed because perf-record reads sample data in whole pages. So for such scenarious, add flag for perf-record to go in "nodelay" mode. To track e.g. what's going on in icmp_rcv while ping is running Use it with something like this: (1) $ perf probe -L icmp_rcv | grep -U8 '^ *43\>' goto error; } 38 if (!pskb_pull(skb, sizeof(*icmph))) goto error; icmph = icmp_hdr(skb); 43 ICMPMSGIN_INC_STATS_BH(net, icmph->type); /* * 18 is the highest 'known' ICMP type. Anything else is a mystery * * RFC 1122: 3.2.2 Unknown ICMP messages types MUST be silently * discarded. */ 50 if (icmph->type > NR_ICMP_TYPES) goto error; $ perf probe icmp_rcv:43 'type=icmph->type' (2) $ cat trace-icmp.py [...] def trace_begin(): print "in trace_begin" def trace_end(): print "in trace_end" def probe__icmp_rcv(event_name, context, common_cpu, common_secs, common_nsecs, common_pid, common_comm, __probe_ip, type): print_header(event_name, common_cpu, common_secs, common_nsecs, common_pid, common_comm) print "__probe_ip=%u, type=%u\n" % \ (__probe_ip, type), [...] (3) $ perf record -a -D -e probe:icmp_rcv -o - | \ perf script -i - -s trace-icmp.py Thanks to Peter Zijlstra for pointing how to do it. Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu>, Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20110112140613.GA11698@tugrik.mns.mnsspb.ru> Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-12 22:59:36 +08:00
"collect data without buffering"),
OPT_BOOLEAN('R', "raw-samples", &record.opts.raw_samples,
"collect raw sample records from all opened counters"),
OPT_BOOLEAN('a', "all-cpus", &record.opts.target.system_wide,
"system-wide collection from all CPUs"),
OPT_STRING('C', "cpu", &record.opts.target.cpu_list, "cpu",
"list of cpus to monitor"),
OPT_U64('c', "count", &record.opts.user_interval, "event period to sample"),
OPT_STRING('o', "output", &record.data.path, "file",
"output file name"),
OPT_BOOLEAN_SET('i', "no-inherit", &record.opts.no_inherit,
&record.opts.no_inherit_set,
"child tasks do not inherit counters"),
perf record: Add --tail-synthesize option When working with overwritable ring buffer there's a inconvenience problem: if perf dumps data after a long period after it starts, non-sample events may lost, which makes following 'perf report' unable to identify proc name and mmap layout. For example: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output \ dd if=/dev/zero of=/dev/null send SIGUSR2 after dd runs long enough. The resuling perf.data lost correct comm and mmap events: # perf script -i perf.data.2016061522374354 perf 24478 [004] 2581325.601789: raw_syscalls:sys_exit: NR 0 = 512 ^^^^ Should be 'dd' 27b2e8 syscall_slow_exit_work+0xfe2000e3 (/lib/modules/4.6.0-rc3+/build/vmlinux) 203cc7 do_syscall_64+0xfe200117 (/lib/modules/4.6.0-rc3+/build/vmlinux) b18d83 return_from_SYSCALL_64+0xfe200000 (/lib/modules/4.6.0-rc3+/build/vmlinux) 7f47c417edf0 [unknown] ([unknown]) ^^^^^^^^^^^^ Fail to unwind This patch provides a '--tail-synthesize' option, allows perf to collect system status when finalizing output file. In resuling output file, the non-sample events reflect system status when dumping data. After this patch: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output --tail-synthesize \ dd if=/dev/zero of=/dev/null # perf script -i perf.data.2016061600544998 dd 27364 [004] 2583244.994464: raw_syscalls:sys_enter: NR 1 (1, ... ^^ Correct comm 203a18 syscall_trace_enter_phase2+0xfe2001a8 ([kernel.kallsyms]) 203aa5 syscall_trace_enter+0xfe200055 ([kernel.kallsyms]) 203caa do_syscall_64+0xfe2000fa ([kernel.kallsyms]) b18d83 return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms]) d8e50 __GI___libc_write+0xffff01d9639f4010 (/tmp/oxygen_root-w00229757/lib64/libc-2.18.so) ^^^^^ Correct unwind This option doesn't aim to solve this problem completely. If a process terminates before SIGUSR2, we still lost its COMM and MMAP events. For example, we can't unwind correctly from the final perf.data we get from the previous example, because when perf collects the final output file (when we press C-c), 'dd' has been terminated so its '/proc/<pid>/mmap' becomes empty. However, this is a cheaper choice. To completely solve this problem we need to continously output non-sample events. To satisify the requirement of daemonization, we need to merge them periodically. It is possible but requires much more code and cycles. Automatically select --tail-synthesize when --overwrite is provided. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-16-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:47 +08:00
OPT_BOOLEAN(0, "tail-synthesize", &record.opts.tail_synthesize,
"synthesize non-sample events at the end of output"),
perf tools: Enable overwrite settings This patch allows following config terms and option: Globally setting events to overwrite; # perf record --overwrite ... Set specific events to be overwrite or no-overwrite. # perf record --event cycles/overwrite/ ... # perf record --event cycles/no-overwrite/ ... Add missing config terms and update the config term array size because the longest string length has changed. For overwritable events, it automatically selects attr.write_backward since perf requires it to be backward for reading. Test result: # perf record --overwrite -e syscalls:*enter_nanosleep* usleep 1 [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ] # perf evlist -v syscalls:sys_enter_nanosleep: type: 2, size: 112, config: 0x134, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, write_backward: 1 # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-14-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:45 +08:00
OPT_BOOLEAN(0, "overwrite", &record.opts.overwrite, "use overwrite mode"),
OPT_BOOLEAN(0, "no-bpf-event", &record.opts.no_bpf_event, "record bpf events"),
OPT_BOOLEAN(0, "strict-freq", &record.opts.strict_freq,
"Fail if the specified frequency can't be used"),
perf record: Allow asking for the maximum allowed sample rate Add the handy '-F max' shortcut to reading and using the kernel.perf_event_max_sample_rate value as the user supplied sampling frequency: # perf record -F max sleep 1 info: Using a maximum frequency rate of 15,000 Hz [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.019 MB perf.data (14 samples) ] # sysctl kernel.perf_event_max_sample_rate kernel.perf_event_max_sample_rate = 15000 # perf evlist -v cycles:ppp: size: 112, { sample_period, sample_freq }: 15000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # perf record -F 10 sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.019 MB perf.data (4 samples) ] # perf evlist -v cycles:ppp: size: 112, { sample_period, sample_freq }: 10, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # Suggested-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-4y0tiuws62c64gp4cf0hme0m@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-02 00:46:23 +08:00
OPT_CALLBACK('F', "freq", &record.opts, "freq or 'max'",
"profile at this frequency",
record__parse_freq),
OPT_CALLBACK('m', "mmap-pages", &record.opts, "pages[,pages]",
"number of mmap data pages and AUX area tracing mmap pages",
record__parse_mmap_pages),
OPT_BOOLEAN(0, "group", &record.opts.group,
"put the counters into a counter group"),
OPT_CALLBACK_NOOPT('g', NULL, &callchain_param,
NULL, "enables call-graph recording" ,
&record_callchain_opt),
OPT_CALLBACK(0, "call-graph", &record.opts,
perf tools: Improve call graph documents and help messages The --call-graph option is complex so we should provide better guide for users. Also change help message to be consistent with config option names. Now perf top will show help like below: $ perf top --call-graph Error: option `call-graph' requires a value Usage: perf top [<options>] --call-graph <record_mode[,record_size],print_type,threshold[,print_limit],order,sort_key[,branch]> setup and enables call-graph (stack chain/backtrace): record_mode: call graph recording mode (fp|dwarf|lbr) record_size: if record_mode is 'dwarf', max size of stack recording (<bytes>) default: 8192 (bytes) print_type: call graph printing style (graph|flat|fractal|none) threshold: minimum call graph inclusion threshold (<percent>) print_limit: maximum number of call graph entry (<number>) order: call graph order (caller|callee) sort_key: call graph sort key (function|address) branch: include last branch info to call graph (branch) Default: fp,graph,0.5,caller,function Requested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Chandler Carruth <chandlerc@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1445524112-5201-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-22 22:28:32 +08:00
"record_mode[,record_size]", record_callchain_help,
&record_parse_callchain_opt),
perf: Fix endianness argument compatibility with OPT_BOOLEAN() and introduce OPT_INCR() Parsing an option from the command line with OPT_BOOLEAN on a bool data type would not work on a big-endian machine due to the manner in which the boolean was being cast into an int and incremented. For example, running 'perf probe --list' on a PowerPC machine would fail to properly set the list_events bool and would therefore print out the usage information and terminate. This patch makes OPT_BOOLEAN work as expected with a bool datatype. For cases where the original OPT_BOOLEAN was intentionally being used to increment an int each time it was passed in on the command line, this patch introduces OPT_INCR with the old behaviour of OPT_BOOLEAN (the verbose variable is currently the only such example of this). I have reviewed every use of OPT_BOOLEAN to verify that a true C99 bool was passed. Where integers were used, I verified that they were only being used for boolean logic and changed them to bools to ensure that they would not be mistakenly used as ints. The major exception was the verbose variable which now uses OPT_INCR instead of OPT_BOOLEAN. Signed-off-by: Ian Munsie <imunsie@au.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: <stable@kernel.org> # NOTE: wont apply to .3[34].x cleanly, please backport Cc: Git development list <git@vger.kernel.org> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Eric B Munson <ebmunson@us.ibm.com> Cc: Valdis.Kletnieks@vt.edu Cc: WANG Cong <amwang@redhat.com> Cc: Thiago Farina <tfransosi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Mike Galbraith <efault@gmx.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: John Kacur <jkacur@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1271147857-11604-1-git-send-email-imunsie@au.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-13 16:37:33 +08:00
OPT_INCR('v', "verbose", &verbose,
"be more verbose (show counter open errors, etc)"),
OPT_BOOLEAN('q', "quiet", &quiet, "don't print any message"),
OPT_BOOLEAN('s', "stat", &record.opts.inherit_stat,
"per thread counts"),
OPT_BOOLEAN('d', "data", &record.opts.sample_address, "Record the sample addresses"),
OPT_BOOLEAN(0, "phys-data", &record.opts.sample_phys_addr,
"Record the sample physical addresses"),
OPT_BOOLEAN(0, "sample-cpu", &record.opts.sample_cpu, "Record the sample cpu"),
OPT_BOOLEAN_SET('T', "timestamp", &record.opts.sample_time,
&record.opts.sample_time_set,
"Record the sample timestamps"),
perf record: Fix period option handling Stephan reported we don't unset PERIOD sample type when --no-period is specified. Adding the unset check and reset PERIOD if --no-period is specified. Committer notes: Check the sample_type, it shouldn't have PERF_SAMPLE_PERIOD there when --no-period is used. Before: # perf record --no-period sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.018 MB perf.data (7 samples) ] # perf evlist -v cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # After: [root@jouet ~]# perf record --no-period sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.019 MB perf.data (17 samples) ] [root@jouet ~]# perf evlist -v cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 [root@jouet ~]# Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Stephane Eranian <eranian@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180201083812.11359-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-01 16:38:11 +08:00
OPT_BOOLEAN_SET('P', "period", &record.opts.period, &record.opts.period_set,
"Record the sample period"),
OPT_BOOLEAN('n', "no-samples", &record.opts.no_samples,
"don't sample"),
OPT_BOOLEAN_SET('N', "no-buildid-cache", &record.no_buildid_cache,
&record.no_buildid_cache_set,
"do not update the buildid cache"),
OPT_BOOLEAN_SET('B', "no-buildid", &record.no_buildid,
&record.no_buildid_set,
"do not collect buildids in perf.data"),
OPT_CALLBACK('G', "cgroup", &record.evlist, "name",
"monitor event in cgroup name only",
parse_cgroups),
OPT_UINTEGER('D', "delay", &record.opts.initial_delay,
"ms to wait before starting measurement after program start"),
OPT_STRING('u', "uid", &record.opts.target.uid_str, "user",
"user to profile"),
OPT_CALLBACK_NOOPT('b', "branch-any", &record.opts.branch_stack,
"branch any", "sample any taken branches",
parse_branch_stack),
OPT_CALLBACK('j', "branch-filter", &record.opts.branch_stack,
"branch filter mask", "branch stack filter modes",
parse_branch_stack),
OPT_BOOLEAN('W', "weight", &record.opts.sample_weight,
"sample by weight (on special events only)"),
OPT_BOOLEAN(0, "transaction", &record.opts.sample_transaction,
"sample transaction flags (special events only)"),
OPT_BOOLEAN(0, "per-thread", &record.opts.target.per_thread,
"use per-thread mmaps"),
perf record: Add ability to name registers to record This patch modifies the -I/--int-regs option to enablepassing the name of the registers to sample on interrupt. Registers can be specified by their symbolic names. For instance on x86, --intr-regs=ax,si. The motivation is to reduce the size of the perf.data file and the overhead of sampling by only collecting the registers useful to a specific analysis. For instance, for value profiling, sampling only the registers used to passed arguements to functions. With no parameter, the --intr-regs still records all possible registers based on the architecture. To name registers, it is necessary to use the long form of the option, i.e., --intr-regs: $ perf record --intr-regs=si,di,r8,r9 ..... To record any possible registers: $ perf record -I ..... $ perf report --intr-regs ... To display the register, one can use perf report -D To list the available registers: $ perf record --intr-regs=\? available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10 R11 R12 R13 R14 R15 Signed-off-by: Stephane Eranian <eranian@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1441039273-16260-4-git-send-email-eranian@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-01 00:41:12 +08:00
OPT_CALLBACK_OPTARG('I', "intr-regs", &record.opts.sample_intr_regs, NULL, "any register",
"sample selected machine registers on interrupt,"
" use -I ? to list register names", parse_regs),
OPT_CALLBACK_OPTARG(0, "user-regs", &record.opts.sample_user_regs, NULL, "any register",
"sample selected machine registers on interrupt,"
" use -I ? to list register names", parse_regs),
OPT_BOOLEAN(0, "running-time", &record.opts.running_time,
"Record running/enabled time of read (:S) events"),
OPT_CALLBACK('k', "clockid", &record.opts,
"clockid", "clockid to use for events, see clock_gettime()",
parse_clockid),
OPT_STRING_OPTARG('S', "snapshot", &record.opts.auxtrace_snapshot_opts,
"opts", "AUX area tracing Snapshot Mode", ""),
OPT_UINTEGER(0, "proc-map-timeout", &proc_map_timeout,
"per thread proc mmap processing timeout in ms"),
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 04:41:43 +08:00
OPT_BOOLEAN(0, "namespaces", &record.opts.record_namespaces,
"Record namespaces events"),
OPT_BOOLEAN(0, "switch-events", &record.opts.record_switch_events,
"Record context switch events"),
perf record: Add --all-user/--all-kernel options Allow user to easily switch all events to user or kernel space with simple --all-user or --all-kernel options. This will be handy within perf mem/c2c wrappers to switch easily monitoring modes. Committer note: Testing it: # perf record --all-kernel --all-user -a sleep 2 Error: option `all-user' cannot be used with all-kernel Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] --all-user Configure all used events to run in user space. --all-kernel Configure all used events to run in kernel space. # perf record --all-user --all-kernel -a sleep 2 Error: option `all-kernel' cannot be used with all-user Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] --all-kernel Configure all used events to run in kernel space. --all-user Configure all used events to run in user space. # perf record --all-user -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.416 MB perf.data (162 samples) ] # perf report | grep '\[k\]' # perf record --all-kernel -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.423 MB perf.data (296 samples) ] # perf report | grep '\[\.\]' # Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1455525293-8671-2-git-send-email-jolsa@kernel.org [ Made those options to be mutually exclusive ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-15 16:34:31 +08:00
OPT_BOOLEAN_FLAG(0, "all-kernel", &record.opts.all_kernel,
"Configure all used events to run in kernel space.",
PARSE_OPT_EXCLUSIVE),
OPT_BOOLEAN_FLAG(0, "all-user", &record.opts.all_user,
"Configure all used events to run in user space.",
PARSE_OPT_EXCLUSIVE),
OPT_STRING(0, "clang-path", &llvm_param.clang_path, "clang path",
"clang binary to use for compiling BPF scriptlets"),
OPT_STRING(0, "clang-opt", &llvm_param.clang_opt, "clang options",
"options passed to clang when compiling BPF scriptlets"),
perf record: Support custom vmlinux path Make perf-record command support --vmlinux option if BPF_PROLOGUE is on. 'perf record' needs vmlinux as the source of DWARF info to generate prologue for BPF programs, so path of vmlinux should be specified. Short name 'k' has been taken by 'clockid'. This patch skips the short option name and uses '--vmlinux' for vmlinux path. Documentation is also updated. Test result: In a production (or broken) environment: (by: # rm -rf ~/.debug/ # mv /lib/modules/`uname -r`/build/vmlinux /tmp/ ) # ./perf record -e ./test_bpf_base.c ls Failed to find the path for kernel: No such file or directory event syntax error: './test_bpf_base.c' \___ You need to check probing points in BPF file ... # ./perf record --vmlinux /tmp/vmlinux -e ./test_bpf_base.c ls ... [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data ] Help messages when build with NO_LIBBPF: # ./perf record -h --transaction sample transaction flags (special events only) --vmlinux <file> vmlinux pathname (not built-in because NO_LIBBPF=1) # ./perf record --vmlinux /tmp/vmlinux ls / Warning: option `vmlinux' is being ignored because NO_LIBBPF=1 ... [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data (11 samples) ] Help messages when build with NO_DWARF: # ./perf record -h --transaction sample transaction flags (special events only) --vmlinux <file> vmlinux pathname (not built-in because NO_DWARF=1) Signed-off-by: He Kuang <hekuang@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1450089563-122430-15-git-send-email-wangnan0@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14 18:39:23 +08:00
OPT_STRING(0, "vmlinux", &symbol_conf.vmlinux_name,
"file", "vmlinux pathname"),
OPT_BOOLEAN(0, "buildid-all", &record.buildid_all,
"Record build-id of all DSOs regardless of hits"),
OPT_BOOLEAN(0, "timestamp-filename", &record.timestamp_filename,
"append timestamp to output filename"),
perf record: Record the first and last sample time in the header In the default 'perf record' configuration, all samples are processed, to create the HEADER_BUILD_ID table. So it's very easy to get the first/last samples and save the time to perf file header via the function write_sample_time(). Later, at post processing time, perf report/script will fetch the time from perf file header. Committer testing: # perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.099 MB perf.data (1101 samples) ] [root@jouet home]# perf report --header | grep "time of " # time of first sample : 22947.909226 # time of last sample : 22948.910704 # # perf report -D | grep PERF_RECORD_SAMPLE\( 0 22947909226101 0x20bb68 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa21b1af3 period: 1 addr: 0 0 22947909229928 0x20bb98 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa200d204 period: 1 addr: 0 <SNIP> 3 22948910397351 0x219360 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 28251/28251: 0xffffffffa22071d8 period: 169518 addr: 0 0 22948910652380 0x20f120 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 198807 addr: 0 2 22948910704034 0x2172d0 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 88111 addr: 0 # Changelog: v7: Just update the patch description according to Arnaldo's suggestion. v6: Currently '--buildid-all' is not enabled at default. So the walking on all samples is the default operation. There is no big overhead to calculate the timestamp boundary in process_sample_event handler once we already go through all samples. So the timestamp boundary calculation is enabled by default when '--buildid-all' is not enabled. While if '--buildid-all' is enabled, we creates a new option "--timestamp-boundary" for user to decide if it enables the timestamp boundary calculation. v5: There is an issue that the sample walking can only work when '--buildid-all' is not enabled. So we need to let the walking be able to work even if '--buildid-all' is enabled and let the processing skips the dso hit marking for this case. At first, I want to provide a new option "--record-time-boundaries". While after consideration, I think a new option is not very necessary. v3: Remove the definitions of first_sample_time and last_sample_time from struct record and directly save them in perf_evlist. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-3-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-12-08 21:13:42 +08:00
OPT_BOOLEAN(0, "timestamp-boundary", &record.timestamp_boundary,
"Record timestamp boundary (time of first/last samples)"),
OPT_STRING_OPTARG_SET(0, "switch-output", &record.switch_output.str,
&record.switch_output.set, "signal or size[BKMG] or time[smhd]",
"Switch output when receiving SIGUSR2 (signal) or cross a size or time threshold",
"signal"),
OPT_INTEGER(0, "switch-max-files", &record.switch_output.num_files,
"Limit number of switch output generated files"),
OPT_BOOLEAN(0, "dry-run", &dry_run,
"Parse options then exit"),
#ifdef HAVE_AIO_SUPPORT
OPT_CALLBACK_OPTARG(0, "aio", &record.opts,
&nr_cblocks_default, "n", "Use <n> control blocks in asynchronous trace writing mode (default: 1, max: 4)",
record__aio_parse),
#endif
OPT_CALLBACK(0, "affinity", &record.opts, "node|cpu",
"Set affinity mask of trace reading thread to NUMA node cpu mask or cpu of processed mmap buffer",
record__parse_affinity),
OPT_END()
};
struct option *record_options = __record_options;
int cmd_record(int argc, const char **argv)
{
int err;
struct record *rec = &record;
char errbuf[BUFSIZ];
perf record: Allow asking for the maximum allowed sample rate Add the handy '-F max' shortcut to reading and using the kernel.perf_event_max_sample_rate value as the user supplied sampling frequency: # perf record -F max sleep 1 info: Using a maximum frequency rate of 15,000 Hz [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.019 MB perf.data (14 samples) ] # sysctl kernel.perf_event_max_sample_rate kernel.perf_event_max_sample_rate = 15000 # perf evlist -v cycles:ppp: size: 112, { sample_period, sample_freq }: 15000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # perf record -F 10 sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.019 MB perf.data (4 samples) ] # perf evlist -v cycles:ppp: size: 112, { sample_period, sample_freq }: 10, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # Suggested-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-4y0tiuws62c64gp4cf0hme0m@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-02 00:46:23 +08:00
setlocale(LC_ALL, "");
perf tools: Make options always available, even if required libs not linked This patch keeps options of perf builtins same in all conditions. If one option is disabled because of compiling options, users should be notified. Masami suggested another implementation in [1] that, by adding a OPTION_NEXT_DEPENDS option before those options in the 'struct option' array, options parser knows an option is disabled. However, in some cases this array is reordered (options__order()). In addition, in parse-option.c that array is const, so we can't simply merge information in decorator option into the affacted option. This patch chooses a simpler implementation that, introducing a set_option_nobuild() function and two option parsing flags. Builtins with such options should call set_option_nobuild() before option parsing. The complexity of this patch is because we want some of options can be skipped safely. In this case their arguments should also be consumed. Options in 'perf record' and 'perf probe' are fixed in this patch. [1] http://lkml.kernel.org/g/50399556C9727B4D88A595C8584AAB3752627CD4@GSjpTKYDCembx32.service.hitachi.net Test result: Normal case: # ./perf probe --vmlinux /tmp/vmlinux sys_write Added new event: probe:sys_write (on sys_write) You can now use it in all perf tools, such as: perf record -e probe:sys_write -aR sleep 1 Build with NO_DWARF=1: # ./perf probe -L sys_write Error: switch `L' is not available because NO_DWARF=1 Usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...] or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...] or: perf probe [<options>] --del '[GROUP:]EVENT' ... or: perf probe --list [GROUP:]EVENT ... or: perf probe [<options>] --funcs -L, --line <FUNC[:RLN[+NUM|-RLN2]]|SRC:ALN[+NUM|-ALN2]> Show source code lines. (not built-in because NO_DWARF=1) # ./perf probe -k /tmp/vmlinux sys_write Warning: switch `k' is being ignored because NO_DWARF=1 Added new event: probe:sys_write (on sys_write) You can now use it in all perf tools, such as: perf record -e probe:sys_write -aR sleep 1 # ./perf probe --vmlinux /tmp/vmlinux sys_write Warning: option `vmlinux' is being ignored because NO_DWARF=1 Added new event: [SNIP] # ./perf probe -l Usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...] or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...] ... -k, --vmlinux <file> vmlinux pathname (not built-in because NO_DWARF=1) -L, --line <FUNC[:RLN[+NUM|-RLN2]]|SRC:ALN[+NUM|-ALN2]> Show source code lines. (not built-in because NO_DWARF=1) ... -V, --vars <FUNC[@SRC][+OFF|%return|:RL|;PT]|SRC:AL|SRC;PT> Show accessible variables on PROBEDEF (not built-in because NO_DWARF=1) --externs Show external variables too (with --vars only) (not built-in because NO_DWARF=1) --no-inlines Don't search inlined functions (not built-in because NO_DWARF=1) --range Show variables location range in scope (with --vars only) (not built-in because NO_DWARF=1) Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1450089563-122430-14-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14 18:39:22 +08:00
#ifndef HAVE_LIBBPF_SUPPORT
# define set_nobuild(s, l, c) set_option_nobuild(record_options, s, l, "NO_LIBBPF=1", c)
set_nobuild('\0', "clang-path", true);
set_nobuild('\0', "clang-opt", true);
# undef set_nobuild
perf record: Support custom vmlinux path Make perf-record command support --vmlinux option if BPF_PROLOGUE is on. 'perf record' needs vmlinux as the source of DWARF info to generate prologue for BPF programs, so path of vmlinux should be specified. Short name 'k' has been taken by 'clockid'. This patch skips the short option name and uses '--vmlinux' for vmlinux path. Documentation is also updated. Test result: In a production (or broken) environment: (by: # rm -rf ~/.debug/ # mv /lib/modules/`uname -r`/build/vmlinux /tmp/ ) # ./perf record -e ./test_bpf_base.c ls Failed to find the path for kernel: No such file or directory event syntax error: './test_bpf_base.c' \___ You need to check probing points in BPF file ... # ./perf record --vmlinux /tmp/vmlinux -e ./test_bpf_base.c ls ... [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data ] Help messages when build with NO_LIBBPF: # ./perf record -h --transaction sample transaction flags (special events only) --vmlinux <file> vmlinux pathname (not built-in because NO_LIBBPF=1) # ./perf record --vmlinux /tmp/vmlinux ls / Warning: option `vmlinux' is being ignored because NO_LIBBPF=1 ... [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data (11 samples) ] Help messages when build with NO_DWARF: # ./perf record -h --transaction sample transaction flags (special events only) --vmlinux <file> vmlinux pathname (not built-in because NO_DWARF=1) Signed-off-by: He Kuang <hekuang@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1450089563-122430-15-git-send-email-wangnan0@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14 18:39:23 +08:00
#endif
#ifndef HAVE_BPF_PROLOGUE
# if !defined (HAVE_DWARF_SUPPORT)
# define REASON "NO_DWARF=1"
# elif !defined (HAVE_LIBBPF_SUPPORT)
# define REASON "NO_LIBBPF=1"
# else
# define REASON "this architecture doesn't support BPF prologue"
# endif
# define set_nobuild(s, l, c) set_option_nobuild(record_options, s, l, REASON, c)
set_nobuild('\0', "vmlinux", true);
# undef set_nobuild
# undef REASON
perf tools: Make options always available, even if required libs not linked This patch keeps options of perf builtins same in all conditions. If one option is disabled because of compiling options, users should be notified. Masami suggested another implementation in [1] that, by adding a OPTION_NEXT_DEPENDS option before those options in the 'struct option' array, options parser knows an option is disabled. However, in some cases this array is reordered (options__order()). In addition, in parse-option.c that array is const, so we can't simply merge information in decorator option into the affacted option. This patch chooses a simpler implementation that, introducing a set_option_nobuild() function and two option parsing flags. Builtins with such options should call set_option_nobuild() before option parsing. The complexity of this patch is because we want some of options can be skipped safely. In this case their arguments should also be consumed. Options in 'perf record' and 'perf probe' are fixed in this patch. [1] http://lkml.kernel.org/g/50399556C9727B4D88A595C8584AAB3752627CD4@GSjpTKYDCembx32.service.hitachi.net Test result: Normal case: # ./perf probe --vmlinux /tmp/vmlinux sys_write Added new event: probe:sys_write (on sys_write) You can now use it in all perf tools, such as: perf record -e probe:sys_write -aR sleep 1 Build with NO_DWARF=1: # ./perf probe -L sys_write Error: switch `L' is not available because NO_DWARF=1 Usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...] or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...] or: perf probe [<options>] --del '[GROUP:]EVENT' ... or: perf probe --list [GROUP:]EVENT ... or: perf probe [<options>] --funcs -L, --line <FUNC[:RLN[+NUM|-RLN2]]|SRC:ALN[+NUM|-ALN2]> Show source code lines. (not built-in because NO_DWARF=1) # ./perf probe -k /tmp/vmlinux sys_write Warning: switch `k' is being ignored because NO_DWARF=1 Added new event: probe:sys_write (on sys_write) You can now use it in all perf tools, such as: perf record -e probe:sys_write -aR sleep 1 # ./perf probe --vmlinux /tmp/vmlinux sys_write Warning: option `vmlinux' is being ignored because NO_DWARF=1 Added new event: [SNIP] # ./perf probe -l Usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...] or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...] ... -k, --vmlinux <file> vmlinux pathname (not built-in because NO_DWARF=1) -L, --line <FUNC[:RLN[+NUM|-RLN2]]|SRC:ALN[+NUM|-ALN2]> Show source code lines. (not built-in because NO_DWARF=1) ... -V, --vars <FUNC[@SRC][+OFF|%return|:RL|;PT]|SRC:AL|SRC;PT> Show accessible variables on PROBEDEF (not built-in because NO_DWARF=1) --externs Show external variables too (with --vars only) (not built-in because NO_DWARF=1) --no-inlines Don't search inlined functions (not built-in because NO_DWARF=1) --range Show variables location range in scope (with --vars only) (not built-in because NO_DWARF=1) Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1450089563-122430-14-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14 18:39:22 +08:00
#endif
CPU_ZERO(&rec->affinity_mask);
rec->opts.affinity = PERF_AFFINITY_SYS;
rec->evlist = perf_evlist__new();
if (rec->evlist == NULL)
return -ENOMEM;
perf tools: Propagate perf_config() errors Previously these were being ignored, sometimes silently. Stop doing that, emitting debug messages and handling the errors. Testing it: $ cat ~/.perfconfig cat: /home/acme/.perfconfig: No such file or directory $ perf stat -e cycles usleep 1 Performance counter stats for 'usleep 1': 938,996 cycles:u 0.003813731 seconds time elapsed $ perf top --stdio Error: You may not have permission to collect system-wide stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, <SNIP> [ perf record: Captured and wrote 0.019 MB perf.data (7 samples) ] [acme@jouet linux]$ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # Overhead Command Shared Object Symbol # ........ ....... ................. ......................... 71.77% usleep libc-2.24.so [.] _dl_addr 27.07% usleep ld-2.24.so [.] _dl_next_ld_env_entry 1.13% usleep [kernel.kallsyms] [k] page_fault $ $ touch ~/.perfconfig $ ls -la ~/.perfconfig -rw-rw-r--. 1 acme acme 0 Jan 27 12:14 /home/acme/.perfconfig $ $ perf stat -e instructions usleep 1 Performance counter stats for 'usleep 1': 244,610 instructions:u 0.000805383 seconds time elapsed $ [root@jouet ~]# chown acme.acme ~/.perfconfig [root@jouet ~]# perf stat -e cycles usleep 1 Warning: File /root/.perfconfig not owned by current user or root, ignoring it. Performance counter stats for 'usleep 1': 937,615 cycles 0.000836931 seconds time elapsed # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-j2rq96so6xdqlr8p8rd6a3jx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-25 00:44:10 +08:00
err = perf_config(perf_record_config, rec);
if (err)
return err;
argc = parse_options(argc, argv, record_options, record_usage,
PARSE_OPT_STOP_AT_NON_OPTION);
if (quiet)
perf_quiet_option();
/* Make system wide (-a) the default target. */
if (!argc && target__none(&rec->opts.target))
rec->opts.target.system_wide = true;
if (nr_cgroups && !rec->opts.target.system_wide) {
usage_with_options_msg(record_usage, record_options,
"cgroup monitoring only available in system-wide mode");
}
if (rec->opts.record_switch_events &&
!perf_can_record_switch_events()) {
ui__error("kernel does not support recording context switch events\n");
parse_options_usage(record_usage, record_options, "switch-events", 0);
return -EINVAL;
}
if (switch_output_setup(rec)) {
parse_options_usage(record_usage, record_options, "switch-output", 0);
return -EINVAL;
}
if (rec->switch_output.time) {
signal(SIGALRM, alarm_sig_handler);
alarm(rec->switch_output.time);
}
if (rec->switch_output.num_files) {
rec->switch_output.filenames = calloc(sizeof(char *),
rec->switch_output.num_files);
if (!rec->switch_output.filenames)
return -EINVAL;
}
/*
* Allow aliases to facilitate the lookup of symbols for address
* filters. Refer to auxtrace_parse_filters().
*/
symbol_conf.allow_aliases = true;
symbol__init(NULL);
err = record__auxtrace_init(rec);
if (err)
goto out;
if (dry_run)
goto out;
err = bpf__setup_stdout(rec->evlist);
if (err) {
bpf__strerror_setup_stdout(rec->evlist, err, errbuf, sizeof(errbuf));
pr_err("ERROR: Setup BPF stdout failed: %s\n",
errbuf);
goto out;
}
err = -ENOMEM;
perf record: Ignore kptr_restrict when not sampling the kernel If we're not sampling the kernel, we shouldn't care about kptr_restrict neither synthesize anything for assisting in resolving kernel samples, like the reference relocation symbol or kernel modules information. Before: $ cat /proc/sys/kernel/kptr_restrict /proc/sys/kernel/perf_event_paranoid 2 2 $ perf record sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. Couldn't record kernel reference relocation symbol Symbol resolution may be skewed if relocation was used (e.g. kexec). Check /proc/kallsyms permission or run as root. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ] $ perf evlist -v cycles:uppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, exclude_kernel: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 $ After: $ perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (10 samples) ] $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-t025e9zftbx2b8cq2w01g5e5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-14 22:03:19 +08:00
if (symbol_conf.kptr_restrict && !perf_evlist__exclude_kernel(rec->evlist))
pr_warning(
"WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted,\n"
"check /proc/sys/kernel/kptr_restrict.\n\n"
"Samples in kernel functions may not be resolved if a suitable vmlinux\n"
"file is not found in the buildid cache or in the vmlinux path.\n\n"
"Samples in kernel modules won't be resolved at all.\n\n"
"If some relocation was applied (e.g. kexec) symbols may be misresolved\n"
"even with a suitable vmlinux or kallsyms file.\n\n");
perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian <eranian@google.com> Suggested-by: David Miller <davem@davemloft.net> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 20:53:51 +08:00
if (rec->no_buildid_cache || rec->no_buildid) {
disable_buildid_cache();
} else if (rec->switch_output.enabled) {
/*
* In 'perf record --switch-output', disable buildid
* generation by default to reduce data file switching
* overhead. Still generate buildid if they are required
* explicitly using
*
* perf record --switch-output --no-no-buildid \
* --no-no-buildid-cache
*
* Following code equals to:
*
* if ((rec->no_buildid || !rec->no_buildid_set) &&
* (rec->no_buildid_cache || !rec->no_buildid_cache_set))
* disable_buildid_cache();
*/
bool disable = true;
if (rec->no_buildid_set && !rec->no_buildid)
disable = false;
if (rec->no_buildid_cache_set && !rec->no_buildid_cache)
disable = false;
if (disable) {
rec->no_buildid = true;
rec->no_buildid_cache = true;
disable_buildid_cache();
}
}
perf record: Add --tail-synthesize option When working with overwritable ring buffer there's a inconvenience problem: if perf dumps data after a long period after it starts, non-sample events may lost, which makes following 'perf report' unable to identify proc name and mmap layout. For example: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output \ dd if=/dev/zero of=/dev/null send SIGUSR2 after dd runs long enough. The resuling perf.data lost correct comm and mmap events: # perf script -i perf.data.2016061522374354 perf 24478 [004] 2581325.601789: raw_syscalls:sys_exit: NR 0 = 512 ^^^^ Should be 'dd' 27b2e8 syscall_slow_exit_work+0xfe2000e3 (/lib/modules/4.6.0-rc3+/build/vmlinux) 203cc7 do_syscall_64+0xfe200117 (/lib/modules/4.6.0-rc3+/build/vmlinux) b18d83 return_from_SYSCALL_64+0xfe200000 (/lib/modules/4.6.0-rc3+/build/vmlinux) 7f47c417edf0 [unknown] ([unknown]) ^^^^^^^^^^^^ Fail to unwind This patch provides a '--tail-synthesize' option, allows perf to collect system status when finalizing output file. In resuling output file, the non-sample events reflect system status when dumping data. After this patch: # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output --tail-synthesize \ dd if=/dev/zero of=/dev/null # perf script -i perf.data.2016061600544998 dd 27364 [004] 2583244.994464: raw_syscalls:sys_enter: NR 1 (1, ... ^^ Correct comm 203a18 syscall_trace_enter_phase2+0xfe2001a8 ([kernel.kallsyms]) 203aa5 syscall_trace_enter+0xfe200055 ([kernel.kallsyms]) 203caa do_syscall_64+0xfe2000fa ([kernel.kallsyms]) b18d83 return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms]) d8e50 __GI___libc_write+0xffff01d9639f4010 (/tmp/oxygen_root-w00229757/lib64/libc-2.18.so) ^^^^^ Correct unwind This option doesn't aim to solve this problem completely. If a process terminates before SIGUSR2, we still lost its COMM and MMAP events. For example, we can't unwind correctly from the final perf.data we get from the previous example, because when perf collects the final output file (when we press C-c), 'dd' has been terminated so its '/proc/<pid>/mmap' becomes empty. However, this is a cheaper choice. To completely solve this problem we need to continously output non-sample events. To satisify the requirement of daemonization, we need to merge them periodically. It is possible but requires much more code and cycles. Automatically select --tail-synthesize when --overwrite is provided. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-16-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:47 +08:00
if (record.opts.overwrite)
record.opts.tail_synthesize = true;
if (rec->evlist->nr_entries == 0 &&
__perf_evlist__add_default(rec->evlist, !record.opts.no_samples) < 0) {
pr_err("Not enough memory for event selector list\n");
goto out;
}
if (rec->opts.target.tid && !rec->opts.no_inherit_set)
rec->opts.no_inherit = true;
err = target__validate(&rec->opts.target);
if (err) {
target__strerror(&rec->opts.target, err, errbuf, BUFSIZ);
ui__warning("%s\n", errbuf);
}
err = target__parse_uid(&rec->opts.target);
if (err) {
int saved_errno = errno;
target__strerror(&rec->opts.target, err, errbuf, BUFSIZ);
ui__error("%s", errbuf);
err = -saved_errno;
goto out;
}
perf evsel: Enable ignore_missing_thread for pid option While monitoring a multithread process with pid option, perf sometimes may return sys_perf_event_open failure with 3(No such process) if any of the process's threads die before we open the event. However, we want perf continue monitoring the remaining threads and do not exit with error. Here, the patch enables perf_evsel::ignore_missing_thread for -p option to ignore complete failure if any of threads die before we open the event. But it may still return sys_perf_event_open failure with 22(Invalid) if we monitors several event groups. sys_perf_event_open: pid 28960 cpu 40 group_fd 118202 flags 0x8 sys_perf_event_open: pid 28961 cpu 40 group_fd 118203 flags 0x8 WARNING: Ignored open failure for pid 28962 sys_perf_event_open: pid 28962 cpu 40 group_fd [118203] flags 0x8 sys_perf_event_open failed, error -22 That is because when we ignore a missing thread, we change the thread_idx without dealing with its fds, FD(evsel, cpu, thread). Then get_group_fd() may return a wrong group_fd for the next thread and sys_perf_event_open() return with 22. sys_perf_event_open(){ ... if (group_fd != -1) perf_fget_light()//to get corresponding group_leader by group_fd ... if (group_leader) if (group_leader->ctx->task != ctx->task)//should on the same task goto err_context ... } This patch also fixes this bug by introducing perf_evsel__remove_fd() and update_fds to allow removing fds for the missing thread. Changes since v1: - Change group_fd__remove() into a more genetic way without changing code logic - Remove redundant condition Changes since v2: - Use a proper function name and add some comment. - Multiline comment style fixes. Committer testing: Before this patch the recently added 'perf stat --per-thread' for system wide counting would race while enumerating all threads using /proc: [root@jouet ~]# perf stat --per-thread failed to parse CPUs map: No such file or directory Usage: perf stat [<options>] [<command>] -C, --cpu <cpu> list of cpus to monitor in system-wide -a, --all-cpus system-wide collection from all CPUs [root@jouet ~]# perf stat --per-thread failed to parse CPUs map: No such file or directory Usage: perf stat [<options>] [<command>] -C, --cpu <cpu> list of cpus to monitor in system-wide -a, --all-cpus system-wide collection from all CPUs [root@jouet ~]# When, say, the kernel was being built, so lots of shortlived threads, after this patch this doesn't happen. Signed-off-by: Mengting Zhang <zhangmengting@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Cheng Jian <cj.chengjian@huawei.com> Cc: Li Bin <huawei.libin@huawei.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1513148513-6974-1-git-send-email-zhangmengting@huawei.com [ Remove one use 'evlist' alias variable ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-12-13 15:01:53 +08:00
/* Enable ignoring missing threads when -u/-p option is defined. */
rec->opts.ignore_missing_thread = rec->opts.target.uid != UINT_MAX || rec->opts.target.pid;
err = -ENOMEM;
if (perf_evlist__create_maps(rec->evlist, &rec->opts.target) < 0)
usage_with_options(record_usage, record_options);
err = auxtrace_record__options(rec->itr, rec->evlist, &rec->opts);
if (err)
goto out;
/*
* We take all buildids when the file contains
* AUX area tracing data because we do not decode the
* trace because it would take too long.
*/
if (rec->opts.full_auxtrace)
rec->buildid_all = true;
if (record_opts__config(&rec->opts)) {
err = -EINVAL;
goto out;
}
if (rec->opts.nr_cblocks > nr_cblocks_max)
rec->opts.nr_cblocks = nr_cblocks_max;
if (verbose > 0)
pr_info("nr_cblocks: %d\n", rec->opts.nr_cblocks);
pr_debug("affinity: %s\n", affinity_tags[rec->opts.affinity]);
err = __cmd_record(&record, argc, argv);
out:
perf record: Propagate exit status of a command line workload Currently perf record doesn't propagate the exit status of a workload given by the command line. But sometimes it'd useful if it's propagated so that a monitoring script can handle errors appropriately. To do that, it moves most of logic out of the exit handlers and run them directly in the __cmd_record(). The only thing needs to be done in the handler is propagating terminating signal so that the shell can terminate its loop properly when Ctrl-C was pressed. Also it cleaned up the resource management code in record__exit(). With this change, perf record returns the child exit status in case of normal termination and send signal to itself when terminated by signal. Example run of Stephane's case: $ perf record true && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] yes $ perf record false && echo yes || echo no [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ] no Jiri's case (error in parent): $ perf record -m 10G true && echo yes || echo no rounding mmap pages size to 17179869184 bytes (4194304 pages) failed to mmap with 12 (Cannot allocate memory) no $ ulimit -n 6 $ perf record sleep 1 && echo yes || echo no failed to create 'go' pipe: Too many open files Couldn't run the workload! no And Peter's case (interrupted by signal): $ while :; do perf record sleep 1; done ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ] Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-12 08:47:24 +08:00
perf_evlist__delete(rec->evlist);
symbol__exit();
auxtrace_record__free(rec->itr);
return err;
}
static void snapshot_sig_handler(int sig __maybe_unused)
{
struct record *rec = &record;
if (trigger_is_ready(&auxtrace_snapshot_trigger)) {
trigger_hit(&auxtrace_snapshot_trigger);
auxtrace_record__snapshot_started = 1;
if (auxtrace_record__snapshot_start(record.itr))
trigger_error(&auxtrace_snapshot_trigger);
}
perf record: Split output into multiple files via '--switch-output' Allow 'perf record' to split its output into multiple files. For example: # ~/perf record -a --timestamp-filename --switch-output & [1] 10763 # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314468 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314762 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] #[ perf record: Dump perf.data.2015122622315171 ] # fg perf record -a --timestamp-filename --switch-output ^C[ perf record: Woken up 1 times to write data ] [ perf record: Dump perf.data.2015122622315513 ] [ perf record: Captured and wrote 0.014 MB perf.data.<timestamp> (296 samples) ] # ls -l total 920 -rw------- 1 root root 797692 Dec 26 22:31 perf.data.2015122622314468 -rw------- 1 root root 59960 Dec 26 22:31 perf.data.2015122622314762 -rw------- 1 root root 59912 Dec 26 22:31 perf.data.2015122622315171 -rw------- 1 root root 19220 Dec 26 22:31 perf.data.2015122622315513 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1461178794-40467-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Added man page entry, used the re-synthesize patch in this series as a fixup ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 02:59:50 +08:00
if (switch_output_signal(rec))
perf record: Split output into multiple files via '--switch-output' Allow 'perf record' to split its output into multiple files. For example: # ~/perf record -a --timestamp-filename --switch-output & [1] 10763 # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314468 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] # [ perf record: Dump perf.data.2015122622314762 ] # kill -s SIGUSR2 10763 [ perf record: dump data: Woken up 1 times ] #[ perf record: Dump perf.data.2015122622315171 ] # fg perf record -a --timestamp-filename --switch-output ^C[ perf record: Woken up 1 times to write data ] [ perf record: Dump perf.data.2015122622315513 ] [ perf record: Captured and wrote 0.014 MB perf.data.<timestamp> (296 samples) ] # ls -l total 920 -rw------- 1 root root 797692 Dec 26 22:31 perf.data.2015122622314468 -rw------- 1 root root 59960 Dec 26 22:31 perf.data.2015122622314762 -rw------- 1 root root 59912 Dec 26 22:31 perf.data.2015122622315171 -rw------- 1 root root 19220 Dec 26 22:31 perf.data.2015122622315513 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1461178794-40467-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Added man page entry, used the re-synthesize patch in this series as a fixup ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 02:59:50 +08:00
trigger_hit(&switch_output_trigger);
}
static void alarm_sig_handler(int sig __maybe_unused)
{
struct record *rec = &record;
if (switch_output_time(rec))
trigger_hit(&switch_output_trigger);
}